Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
   6 #   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
   7 #   Free Software Foundation, Inc.
   8
   9 # This file is part of GNU Emacs.
  10
  11 # GNU Emacs is free software: you can redistribute it and/or modify
  12 # it under the terms of the GNU General Public License as published by
  13 # the Free Software Foundation, either version 3 of the License, or
  14 # (at your option) any later version.
  15
  16 # GNU Emacs is distributed in the hope that it will be useful,
  17 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  18 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19 # GNU General Public License for more details.
  20
  21 # You should have received a copy of the GNU General Public License
  22 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
  23
  24 ### Commentary:
  25
  26 # make all      to compile and build Emacs.
  27 # make install  to install it.
  28 # make TAGS     to update tags tables.
  29 #
  30 # make clean  or  make mostlyclean
  31 #      Delete all files from the current directory that are normally
  32 #      created by building the program.  Don't delete the files that
  33 #      record the configuration.  Also preserve files that could be made
  34 #      by building, but normally aren't because the distribution comes
  35 #      with them.
  36 #
  37 #      Delete `.dvi' files here if they are not part of the distribution.
  38 #
  39 # make distclean
  40 #      Delete all files from the current directory that are created by
  41 #      configuring or building the program.  If you have unpacked the
  42 #      source and built the program without creating any other files,
  43 #      `make distclean' should leave only the files that were in the
  44 #      distribution.
  45 #
  46 # make maintainer-clean
  47 #      Delete everything from the current directory that can be
  48 #      reconstructed with this Makefile.  This typically includes
  49 #      everything deleted by distclean, plus more: .elc files,
  50 #      C source files produced by Bison, tags tables, info files,
  51 #      and so on.
  52 #
  53 # make extraclean
  54 #      Still more severe - delete backup and autosave files, too.
  55 #
  56 # make bootstrap
  57 #      Removes all the compiled files to force a new bootstrap from a
  58 #      clean slate, and then build in the normal way.
  59
  60 SHELL = /bin/sh
  61
  62 # This may not work with certain non-GNU make's.  It only matters when
  63 # inheriting a CDPATH not starting with the current directory.
  64 CDPATH=
  65
  66 # If Make doesn't predefine MAKE, set it here.
  67 @SET_MAKE@
  68
  69 # ==================== Things `configure' Might Edit ====================
  70
  71 CC=@CC@
  72 CPP=@CPP@
  73 C_SWITCH_SYSTEM=@c_switch_system@
  74 ALLOCA=@ALLOCA@
  75 LN_S=@LN_S@
  76 CFLAGS=@CFLAGS@
  77 LDFLAGS=@LDFLAGS@
  78 CPPFLAGS=@CPPFLAGS@
  79 C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
  80 LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
  81 EXEEXT=@EXEEXT@
  82 MAKEINFO=@MAKEINFO@
  83
  84 ### These help us choose version- and architecture-specific directories
  85 ### to install files in.
  86
  87 ### This should be the number of the Emacs version we're building,
  88 ### like `18.59' or `19.0'.
  89 version=@version@
  90
  91 ### This should be the name of the configuration we're building Emacs
  92 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  93 configuration=@configuration@
  94
  95 # ==================== Where To Install Things ====================
  96
  97 # The default location for installation.  Everything is placed in
  98 # subdirectories of this directory.  The default values for many of
  99 # the variables below are expressed in terms of this one, so you may
 100 # not need to change them.  This defaults to /usr/local.
 101 prefix=@prefix@
 102
 103 # Like `prefix', but used for architecture-specific files.
 104 exec_prefix=@exec_prefix@
 105
 106 # Where to install Emacs and other binaries that people will want to
 107 # run directly (like etags).
 108 bindir=@bindir@
 109
 110 # The root of the directory tree for read-only architecture-independent
 111 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 112 datarootdir=@datarootdir@
 113
 114 # Where to install architecture-independent data files.  ${lispdir}
 115 # and ${etcdir} are subdirectories of this.
 116 datadir=@datadir@
 117
 118 # Where to install and expect the files that Emacs modifies as it
 119 # runs.  These files are all architecture-independent.
 120 # Right now, this is not used.
 121 sharedstatedir=@sharedstatedir@
 122
 123 # Where to install and expect executable files to be run by Emacs
 124 # rather than directly by users, and other architecture-dependent
 125 # data.  ${archlibdir} is a subdirectory of this.
 126 libexecdir=@libexecdir@
 127
 128 # Where to install Emacs's man pages.
 129 # This used to allow choice of the numeric extension, but this made
 130 # little sense since the files were always installed in man1/
 131 # (and they contain cross-references that expect them to be there).
 132 mandir=@mandir@
 133 man1dir=$(mandir)/man1
 134 MAN_PAGES=b2m.1 ctags.1 ebrowse.1 emacs.1 emacsclient.1 etags.1 \
 135           grep-changelog.1 rcs-checkin.1
 136
 137 # Where to install and expect the info files describing Emacs.  In the
 138 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
 139 # since there are now many packages documented with the texinfo
 140 # system, it is inappropriate to imply that it is part of Emacs.
 141 infodir=@infodir@
 142 INFO_FILES=ada-mode autotype calc ccmode cl dbus dired-x ebrowse ediff  \
 143            efaq eintr elisp emacs emacs-mime epa erc eshell eudc        \
 144            flymake forms gnus idlwave info mairix-el message mh-e       \
 145            newsticker nxml-mode org pcl-cvs pgg rcirc reftex remember   \
 146            sasl sc ses sieve speedbar tramp vip viper widget woman      \
 147            smtpmail url
 148
 149 # Directory for local state files for all programs.
 150 localstatedir=@localstatedir@
 151
 152 # Where to look for bitmap files.
 153 bitmapdir=@bitmapdir@
 154
 155 # Where to find the source code.  The source code for Emacs's C kernel is
 156 # expected to be in ${srcdir}/src, and the source code for Emacs's
 157 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 158 # set by the configure script's `--srcdir' option.
 159
 160 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 161 srcdir=@srcdir@
 162
 163 # Where the manpage source files are kept.
 164 mansrcdir=$(srcdir)/doc/man
 165
 166 # Tell make where to find source files; this is needed for the makefiles.
 167 VPATH=@srcdir@
 168
 169 # Where to find the application default.
 170 x_default_search_path=@x_default_search_path@
 171
 172 # Location to install Emacs.app under NeXT/Open/GNUstep / Cocoa
 173 ns_appdir=@ns_appdir@
 174 ns_appbindir=@ns_appbindir@
 175 ns_appresdir=@ns_appresdir@
 176
 177 # Where the etc/emacs.desktop file is to be installed.
 178 desktopdir=$(datarootdir)/applications
 179
 180 # Where the etc/images/icons/hicolor directory is to be installed.
 181 icondir=$(datarootdir)/icons
 182
 183 # The source directory for the icon files.
 184 iconsrcdir=$(srcdir)/etc/images/icons
 185
 186 # ==================== Emacs-specific directories ====================
 187
 188 # These variables hold the values Emacs will actually use.  They are
 189 # based on the values of the standard Make variables above.
 190
 191 # Where to install the lisp files distributed with
 192 # Emacs.  This includes the Emacs version, so that the
 193 # lisp files for different versions of Emacs will install
 194 # themselves in separate directories.
 195 lispdir=@lispdir@
 196
 197 # Directories Emacs should search for lisp files specific
 198 # to this site (i.e. customizations), before consulting
 199 # ${lispdir}.  This should be a colon-separated list of
 200 # directories.
 201 locallisppath=@locallisppath@
 202
 203 # Where Emacs will search to find its lisp files.  Before
 204 # changing this, check to see if your purpose wouldn't
 205 # better be served by changing locallisppath.  This
 206 # should be a colon-separated list of directories.
 207 lisppath=@lisppath@
 208
 209 # Where Emacs will search for its lisp files while
 210 # building.  This is only used during the process of
 211 # compiling Emacs, to help Emacs find its lisp files
 212 # before they've been installed in their final location.
 213 # It's usually identical to lisppath, except that
 214 # it does not include locallisppath, and the
 215 # entry for the directory containing the installed lisp
 216 # files has been replaced with ../lisp.  This should be a
 217 # colon-separated list of directories.
 218 buildlisppath=${srcdir}/lisp
 219
 220 # Where to install the other architecture-independent
 221 # data files distributed with Emacs (like the tutorial,
 222 # the cookie recipes and the Zippy database). This path
 223 # usually contains the Emacs version number, so the data
 224 # files for multiple versions of Emacs may be installed
 225 # at once.
 226 etcdir=@etcdir@
 227
 228 # Where to put executables to be run by Emacs rather than
 229 # the user.  This path usually includes the Emacs version
 230 # and configuration name, so that multiple configurations
 231 # for multiple versions of Emacs may be installed at
 232 # once.
 233 archlibdir=@archlibdir@
 234
 235 # Where to put the docstring file.
 236 docdir=@docdir@
 237
 238 # Where to install Emacs game score files.
 239 gamedir=@gamedir@
 240
 241 # ==================== Utility Programs for the Build ====================
 242
 243 # Allow the user to specify the install program.
 244 INSTALL = @INSTALL@
 245 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 246 INSTALL_DATA = @INSTALL_DATA@
 247 INSTALL_INFO = @INSTALL_INFO@
 248 # By default, we uphold the dignity of our programs.
 249 INSTALL_STRIP =
 250
 251 # We use gzip to compress installed .el files.
 252 GZIP_PROG = @GZIP_PROG@
 253
 254 # ============================= Targets ==============================
 255
 256 # Program name transformation.
 257 TRANSFORM = @program_transform_name@
 258
 259 # What emacs should be called when installed.
 260 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
 261 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
 262
 263 # Subdirectories to make recursively.  `lisp' is not included
 264 # because the compiled lisp files are part of the distribution.
 265 # leim is not included because it needs special handling.
 266 #
 267 # Actually, we now include `lisp' as well, since the compiled files
 268 # are not included any more in case of bootstrap or in case Emacs was
 269 # checked out from a VCS.
 270 SUBDIR = lib-src src lisp
 271
 272 # The subdir makefiles created by config.status.
 273 SUBDIR_MAKEFILES = lib-src/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispref/Makefile doc/lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile lisp/Makefile
 274
 275 # Subdirectories to install, and where they'll go.
 276 # lib-src's makefile knows how to install it, so we don't do that here.
 277 # leim's makefile also knows how to install it, so we don't do that here.
 278 # When installing the info files, we need to do special things to
 279 # avoid nuking an existing dir file, so we don't do that here;
 280 # instead, we have written out explicit code in the `install' targets.
 281 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 282 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
 283
 284 all: ${SUBDIR} leim
 285
 286 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
 287
 288 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 289 epaths-force: FRC
 290         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 291           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 292           x_default_search_path=`echo ${x_default_search_path}`; \
 293           gamedir=`echo ${gamedir}`; \
 294           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 295           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";'      \
 296           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 297           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 298           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 299           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 300           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 301           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 302           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 303           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
 304           -e 's;/[*] *arch-tag:.*;/*;') &&              \
 305         ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
 306
 307 # For parallel make, src should be built before leim.
 308 # "export PARALLEL=0" is for SGI's Make, to prevent it from
 309 # running more than 1 process in the leim directory, especially for
 310 # the $TIT files there.
 311 leim:   src Makefile FRC
 312         (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
 313           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 314           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
 315
 316 src:    lib-src FRC
 317
 318 .RECURSIVE: ${SUBDIR} leim
 319
 320 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
 321 lisp: src
 322
 323 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
 324 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
 325 # constructed yet) or the empty string (otherwise).
 326 # src/Makefile.in uses it to implement conditional dependencies, so that
 327 # files that need bootstrap-emacs to be built do not additionally need
 328 # to be kept fresher than bootstrap-emacs.  Otherwise changing a single
 329 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
 330 # all preloaded elisp files, and only then dump the actual src/emacs, which
 331 # is not wrong, but is overkill in 99.99% of the cases.
 332 ${SUBDIR}: Makefile FRC
 333         boot=bootstrap-emacs$(EXEEXT);                         \
 334         if [ -x "src/$$boot" ]; then boot=""; fi;                   \
 335         cd $@; $(MAKE) all $(MFLAGS)                           \
 336           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 337           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"
 338
 339 blessmail: Makefile src FRC
 340         cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
 341           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 342
 343 # We used to have one rule per */Makefile.in, but that leads to race
 344 # conditions with parallel makes, so let's assume that the time stamp on
 345 # ./Makefile is representative of the time stamp on all the other Makefiles.
 346 Makefile: config.status $(srcdir)/src/config.in \
 347           $(srcdir)/Makefile.in \
 348           $(srcdir)/src/Makefile.in \
 349           $(srcdir)/lib-src/Makefile.in \
 350           $(srcdir)/doc/emacs/Makefile.in \
 351           $(srcdir)/doc/misc/Makefile.in \
 352           $(srcdir)/doc/lispref/Makefile.in \
 353           $(srcdir)/doc/lispintro/Makefile.in \
 354           $(srcdir)/oldXMenu/Makefile.in \
 355           $(srcdir)/lwlib/Makefile.in \
 356           $(srcdir)/leim/Makefile.in \
 357           $(srcdir)/lisp/Makefile.in
 358         ./config.status
 359
 360 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 361         ./config.status --recheck
 362
 363 AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/m4/getopt.m4
 364
 365 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 366         cd ${srcdir} && autoconf
 367
 368 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 369         @true
 370 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 371         cd ${srcdir} && autoheader
 372         rm -f $(srcdir)/src/stamp-h.in
 373         echo timestamp > $(srcdir)/src/stamp-h.in
 374
 375 # ==================== Installation ====================
 376
 377 ## If we let lib-src do its own installation, that means we
 378 ## don't have to duplicate the list of utilities to install in
 379 ## this Makefile as well.
 380
 381 ## On AIX, use tar xBf.
 382 ## On Xenix, use tar xpf.
 383
 384 .PHONY: install mkdir
 385
 386 ## We delete each directory in ${COPYDESTS} before we copy into it;
 387 ## that way, we can reinstall over directories that have been put in
 388 ## place with their files read-only (perhaps because they are checked
 389 ## into RCS).  In order to make this safe, we make sure that the
 390 ## source exists and is distinct from the destination.
 391 ### We do install-arch-indep first because
 392 ### the executable needs the Lisp files and DOC file to work properly.
 393 install: all install-arch-indep install-arch-dep install-leim blessmail
 394         @true
 395
 396 MV_DIRS = for i in $$dir; do rm -fr $$(basename "$$i") ; mv "$$i" . ; done
 397
 398 ### Install the executables that were compiled specifically for this machine.
 399 ### It would be nice to do something for a parallel make
 400 ### to ensure that install-arch-indep finishes before this starts.
 401 install-arch-dep: mkdir
 402         (cd lib-src; \
 403           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 404             exec_prefix=${exec_prefix} bindir=${bindir} \
 405             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 406             INSTALL_STRIP=${INSTALL_STRIP})
 407         ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
 408         -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
 409         rm -f $(DESTDIR)${bindir}/$(EMACS)
 410         -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
 411         -unset CDPATH; \
 412         for f in `cd lib-src && echo fns-*.el`; do \
 413           if test -r lib-src/$$f ; then \
 414             ${INSTALL_DATA} lib-src/$$f $(DESTDIR)${archlibdir}/$$f; \
 415           else true; fi ; \
 416         done
 417         if test "${ns_appdir}" != ""; then \
 418           ( cd ${ns_appresdir} ; \
 419             if test -d share/emacs ; then dir=share/emacs/*/*; $(MV_DIRS); fi;\
 420             if test -d share/info ; then dir=share/info; $(MV_DIRS) ; fi ; \
 421             rm -fr share ) ; \
 422           ( cd ${ns_appbindir}/libexec ; dir=emacs/*/*/* ; $(MV_DIRS); \
 423             rm -fr emacs ) ; \
 424           ( cd ${ns_appbindir}/bin ; rm -f emacs emacs-23* ; \
 425             ln -sf ../libexec/* .) ; \
 426         else true ; fi
 427
 428 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 429 ## Needs to be the user running install, so configure can't set it.
 430 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 431           `id -un 2> /dev/null`; do \
 432           [ -n "$${installuser}" ] && break ; \
 433         done
 434
 435 ### Install the files that are machine-independent.
 436 ### Most of them come straight from the distribution;
 437 ### the exception is the DOC-* files, which are copied
 438 ### from the build directory.
 439
 440 ## Note that we copy DOC* and then delete DOC
 441 ## as a workaround for a bug in tar on Ultrix 4.2.
 442
 443 ## We install only the relevant DOC file if possible
 444 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
 445
 446 ## If people complain about the h flag in tar command, take that out.
 447 ## That flag is also used in leim/Makefile.in
 448
 449 ## Note that the Makefiles in the etc directory are potentially useful
 450 ## in an installed Emacs, so should not be excluded.
 451
 452 install-arch-indep: mkdir info install-etc
 453         -set ${COPYDESTS} ; \
 454         unset CDPATH; \
 455         for dir in ${COPYDIR} ; do \
 456           if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
 457             rm -rf $$1 ; \
 458           fi ; \
 459           shift ; \
 460         done
 461         -set ${COPYDESTS} ; \
 462         mkdir ${COPYDESTS} ; \
 463         chmod ugo+rx ${COPYDESTS} ; \
 464         unset CDPATH; \
 465         $(set_installuser); \
 466         for dir in ${COPYDIR} ; do \
 467           dest=$$1 ; shift ; \
 468           [ -d $${dir} ] \
 469           && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
 470           && (echo "Copying $${dir} to $${dest}..." ; \
 471               (cd $${dir}; tar -chf - . ) \
 472                 | (cd $${dest}; umask 022; \
 473                    tar -xvf - && cat > /dev/null) || exit 1; \
 474               find $${dest} -exec chown $${installuser} {} ';' ;\
 475               for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \
 476                 chmod a+rx $${subdir} ; \
 477                 rm -rf $${subdir}/RCS ; \
 478                 rm -rf $${subdir}/CVS ; \
 479                 rm -f  $${subdir}/.cvsignore ; \
 480                 rm -f  $${subdir}/.arch-inventory ; \
 481                 rm -f  $${subdir}/\#* ; \
 482                 rm -f  $${subdir}/.\#* ; \
 483                 rm -f  $${subdir}/*~ ; \
 484                 rm -f  $${subdir}/*.orig ; \
 485                 [ "$${dir}" != "${srcdir}/etc" ] && \
 486                         rm -f  $${subdir}/[mM]akefile* ; \
 487                 rm -f  $${subdir}/ChangeLog* ; \
 488                 rm -f  $${subdir}/dired.todo ; \
 489               done) ; \
 490         done
 491         -rm -f $(DESTDIR)${lispdir}/subdirs.el
 492         $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
 493         if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
 494         then true; \
 495         else \
 496           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 497            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 498             > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
 499         fi
 500         chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
 501         -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
 502         then true; \
 503         else \
 504           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 505            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 506             > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
 507         fi
 508         -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
 509         -unset CDPATH; \
 510         if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
 511         then \
 512            fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
 513            if [ -f "./etc/DOC-$${fullversion}" ]; \
 514            then \
 515              docfile="DOC-$${fullversion}"; \
 516            else \
 517              docfile="DOC-${version}*"; \
 518            fi; \
 519            echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
 520            (cd ./etc; tar -chf - $${docfile}) \
 521              |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 522            (cd $(DESTDIR)$(docdir); \
 523             $(set_installuser); \
 524             chown $${installuser} DOC*; chmod a+r DOC*; \
 525             if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
 526         else true; fi
 527         -unset CDPATH; \
 528         if [ -r ./lisp ] \
 529            && [ -r ./lisp/simple.el ] \
 530            && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \
 531            && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
 532         then \
 533            echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \
 534            (cd lisp; tar -chf - *.el *.elc) \
 535              |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 536            (cd $(DESTDIR)${lispdir}; \
 537             $(set_installuser); \
 538             find . -exec chown $${installuser} {} ';') ; \
 539         else true; fi
 540         -unset CDPATH; \
 541         if [ -n "${GZIP_PROG}" ]; \
 542         then \
 543            echo "Compressing *.el ..." ; \
 544            (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
 545                 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
 546             done) \
 547         else true; fi
 548         -unset CDPATH; \
 549         thisdir=`/bin/pwd`; \
 550         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 551         then \
 552           (cd $(DESTDIR)${infodir};  \
 553            if [ -f dir ]; then true; \
 554            else \
 555              (cd $${thisdir}; \
 556               ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
 557               chmod a+r $(DESTDIR)${infodir}/dir); \
 558            fi; \
 559            cd ${srcdir}/info ; \
 560            for elt in $(INFO_FILES); do \
 561               test "$(MAKEINFO)" = "off" && ! test -e $$elt && continue; \
 562               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 563                 ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \
 564                 chmod a+r $(DESTDIR)${infodir}/$$f; \
 565               done; \
 566            done); \
 567         else true; fi
 568         -unset CDPATH; \
 569         thisdir=`/bin/pwd`; \
 570         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 571         then \
 572           for elt in $(INFO_FILES); do \
 573             test "$(MAKEINFO)" = "off" && ! test -e $$elt && continue; \
 574             (cd $${thisdir}; \
 575              ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 576           done; \
 577         else true; fi
 578         -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} $(DESTDIR)${datadir}/emacs/site-lisp ${COPYDESTS} $(DESTDIR)${infodir}
 579         thisdir=`/bin/pwd`; \
 580         cd ${mansrcdir}; \
 581         for page in ${MAN_PAGES}; do \
 582           (cd $${thisdir}; \
 583            ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}; \
 584            chmod a+r $(DESTDIR)${man1dir}/$${page}); \
 585         done
 586
 587 ## Install those items from etc/ that need to end up elsewhere.
 588 install-etc: mkdir
 589         ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
 590           $(DESTDIR)${desktopdir}/emacs.desktop
 591         for icon in $(iconsrcdir)/*/*/apps/*.* \
 592           $(iconsrcdir)/*/*/mimetypes/*.*; do \
 593           if [ -r $${icon} ]; then \
 594             iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
 595             ${INSTALL_DATA} $${icon} $${iicon} ; \
 596           fi ; \
 597         done
 598
 599 ### Install LEIM files.  Although they are machine-independent, we
 600 ### have separate target here instead of including it in
 601 ### `install-arch-indep'.  People who extracted LEIM files after they
 602 ### insalled Emacs itself can install only LEIM files by this target.
 603 install-leim: leim/Makefile mkdir
 604         cd leim; $(MAKE) install
 605
 606 ### Build Emacs and install it, stripping binaries while installing them.
 607 install-strip:
 608         $(MAKE) INSTALL_STRIP=-s install
 609
 610 ### Build all the directories we're going to install Emacs in.  Since
 611 ### we may be creating several layers of directories (for example,
 612 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
 613 ### instead of mkdir.  Not all systems' mkdir programs have the `-p' flag.
 614 mkdir: FRC
 615         if [ -d $(DESTDIR)${datadir} ]; then true; else \
 616           $(srcdir)/mkinstalldirs $(DESTDIR)${datadir}; \
 617           chmod a+r $(DESTDIR)${datadir};\
 618         fi
 619         icondirs= ; \
 620         for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \
 621           if [ -d $${dir} ]; then \
 622             icondirs="$${icondirs} $${dir}" ; \
 623           fi ; \
 624         done ; \
 625         icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
 626         $(srcdir)/mkinstalldirs ${COPYDESTS} $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
 627           $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
 628           $(DESTDIR)${datadir}/emacs/site-lisp \
 629           $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
 630           $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
 631           $(DESTDIR)${desktopdir} $${icondirs}
 632
 633 ### Delete all the installed files that the `install' target would
 634 ### create (but not the noninstalled files such as `make all' would
 635 ### create).
 636 ###
 637 ### Don't delete the lisp and etc directories if they're in the source tree.
 638 uninstall:
 639         (cd lib-src;                                    \
 640          $(MAKE) $(MFLAGS) uninstall                    \
 641             prefix=${prefix} exec_prefix=${exec_prefix} \
 642             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
 643         -unset CDPATH; \
 644         for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do        \
 645           if [ -d $${dir} ]; then                       \
 646             case `(cd $${dir} ; /bin/pwd)` in           \
 647               `(cd ${srcdir} ; /bin/pwd)`* ) ;;         \
 648               * ) rm -rf $${dir} ;;                     \
 649             esac ;                                      \
 650             case $${dir} in                             \
 651               $(DESTDIR)${datadir}/emacs/${version}/* )         \
 652                 rm -rf $(DESTDIR)${datadir}/emacs/${version}    \
 653               ;;                                        \
 654             esac ;                                      \
 655           fi ;                                          \
 656         done
 657         (cd $(DESTDIR)${archlibdir} && rm -f fns-*)
 658         -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
 659         (cd $(DESTDIR)${infodir} && \
 660           for elt in $(INFO_FILES); do \
 661             $(INSTALL_INFO) --remove --info-dir=. $$elt; \
 662             for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 663               rm -f $$f; \
 664             done; \
 665           done;)
 666         (cd $(DESTDIR)${man1dir}  && rm -f $(MAN_PAGES))
 667         (cd $(DESTDIR)${bindir}  && rm -f $(EMACSFULL) $(EMACS))
 668         (cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg )
 669         -rm -f $(DESTDIR)${desktopdir}/emacs.desktop
 670         for file in snake-scores tetris-scores; do \
 671           file=$(DESTDIR)${gamedir}/$${file}; \
 672           [ -s $${file} ] || rm -f $$file; \
 673         done
 674
 675 FRC:
 676
 677 # ==================== Cleaning up and miscellanea ====================
 678
 679 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
 680
 681 ### `mostlyclean'
 682 ###      Like `clean', but may refrain from deleting a few files that people
 683 ###      normally don't want to recompile.  For example, the `mostlyclean'
 684 ###      target for GCC does not delete `libgcc.a', because recompiling it
 685 ###      is rarely necessary and takes a lot of time.
 686 mostlyclean: FRC
 687         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 688         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 689         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 690         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 691         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) mostlyclean)
 692         -(cd doc/misc &&   $(MAKE) $(MFLAGS) mostlyclean)
 693         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) mostlyclean)
 694         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)
 695         (cd leim;     $(MAKE) $(MFLAGS) mostlyclean)
 696
 697 ### `clean'
 698 ###      Delete all files from the current directory that are normally
 699 ###      created by building the program.  Don't delete the files that
 700 ###      record the configuration.  Also preserve files that could be made
 701 ###      by building, but normally aren't because the distribution comes
 702 ###      with them.
 703 ###
 704 ###      Delete `.dvi' files here if they are not part of the distribution.
 705 clean: FRC
 706         (cd src;      $(MAKE) $(MFLAGS) clean)
 707         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 708         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 709         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 710         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 711         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 712         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 713         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 714         (cd leim;     $(MAKE) $(MFLAGS) clean)
 715
 716 ### `bootclean'
 717 ###      Delete all files that need to be remade for a clean bootstrap.
 718 top_bootclean=\
 719         rm -f config.cache config.log
 720 ### `distclean'
 721 ###      Delete all files from the current directory that are created by
 722 ###      configuring or building the program.  If you have unpacked the
 723 ###      source and built the program without creating any other files,
 724 ###      `make distclean' should leave only the files that were in the
 725 ###      distribution.
 726 top_distclean=\
 727         ${top_bootclean}; \
 728         rm -f config.status Makefile ${SUBDIR_MAKEFILES}
 729 distclean: FRC
 730         (cd src;      $(MAKE) $(MFLAGS) distclean)
 731         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 732         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 733         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 734         (cd doc/emacs &&    $(MAKE) $(MFLAGS) distclean)
 735         (cd doc/misc &&    $(MAKE) $(MFLAGS) distclean)
 736         (cd doc/lispref &&    $(MAKE) $(MFLAGS) distclean)
 737         (cd doc/lispintro &&    $(MAKE) $(MFLAGS) distclean)
 738         (cd leim;     $(MAKE) $(MFLAGS) distclean)
 739         (cd lisp;     $(MAKE) $(MFLAGS) distclean)
 740         ${top_distclean}
 741
 742 ### `bootstrap-clean'
 743 ###      Delete everything that can be reconstructed by `make' and that
 744 ###      needs to be deleted in order to force a bootstrap from a clean state.
 745 bootstrap-clean: FRC
 746         (cd src;      $(MAKE) $(MFLAGS) bootstrap-clean)
 747         (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
 748         (cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)
 749         (cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)
 750         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) maintainer-clean)
 751         -(cd doc/misc &&   $(MAKE) $(MFLAGS) maintainer-clean)
 752         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)
 753         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)
 754         (cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)
 755         (cd lisp;     $(MAKE) $(MFLAGS) bootstrap-clean)
 756         ${top_bootclean}
 757
 758 ### `maintainer-clean'
 759 ###      Delete everything from the current directory that can be
 760 ###      reconstructed with this Makefile.  This typically includes
 761 ###      everything deleted by distclean, plus more: C source files
 762 ###      produced by Bison, tags tables, info files, and so on.
 763 ###
 764 ###      One exception, however: `make maintainer-clean' should not delete
 765 ###      `configure' even if `configure' can be remade using a rule in the
 766 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 767 ###      anything that needs to exist in order to run `configure' and then
 768 ###      begin to build the program.
 769 maintainer-clean: bootstrap-clean FRC
 770         (cd src;      $(MAKE) $(MFLAGS) maintainer-clean)
 771         (cd lisp;     $(MAKE) $(MFLAGS) maintainer-clean)
 772         ${top_distclean}
 773
 774 ### This doesn't actually appear in the coding standards, but Karl
 775 ### says GCC supports it, and that's where the configuration part of
 776 ### the coding standards seem to come from.  It's like distclean, but
 777 ### it deletes backup and autosave files too.
 778 extraclean:
 779         for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 780         ${top_distclean}
 781         -rm -f config-tmp-*
 782         -rm -f *~ \#*
 783
 784 # The src subdir knows how to do the right thing
 785 # even when the build directory and source dir are different.
 786 TAGS tags: lib-src src
 787         cd src; $(MAKE) tags
 788
 789 check:
 790         @echo "We don't have any tests for GNU Emacs yet."
 791
 792 dist:
 793         cd ${srcdir}; ./make-dist
 794
 795 .PHONY: info dvi dist check html
 796
 797 info-real:
 798         -(cd doc/emacs; $(MAKE) $(MFLAGS) info)
 799         -(cd doc/misc; $(MAKE) $(MFLAGS) info)
 800         -(cd doc/lispref; $(MAKE) $(MFLAGS) info)
 801         -(cd doc/lispintro; $(MAKE) $(MFLAGS) info)
 802
 803 force-info:
 804 # Note that man/Makefile knows how to
 805 # put the info files in $(srcdir),
 806 # so we can do ok running make in the build dir.
 807 info: force-info
 808         @if test "$(MAKEINFO)" = "off"; then \
 809           echo "Configured --without-makeinfo, not building manuals" ; \
 810         elif test "$(MAKEINFO)" = "no"; then \
 811           echo "makeinfo is missing - cannot build manuals" ; \
 812           exit 1 ; \
 813         else \
 814           $(MAKE) $(MFLAGS) info-real ; \
 815         fi
 816
 817 # The info/dir file must be updated by hand when new manuals are added.
 818 check-info-dir: info
 819         cd info ; \
 820         missing= ; \
 821         for file in *; do \
 822           test -f "$${file}" || continue ; \
 823           case $${file} in \
 824             *-[0-9]*|COPYING|dir) continue ;; \
 825           esac ; \
 826           grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
 827         done ; \
 828         if test -n "$${missing}"; then \
 829           echo "Missing info/dir entries: $${missing}" ; \
 830           exit 1 ; \
 831         fi ; \
 832         echo "info/dir is OK"
 833
 834 dvi:
 835         (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
 836         (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
 837         (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
 838         (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
 839
 840 #### Bootstrapping.
 841
 842 ### This first cleans the lisp subdirectory, removing all compiled
 843 ### Lisp files.  Then re-run make to build all the files anew.
 844
 845 .PHONY: bootstrap
 846
 847 bootstrap: bootstrap-clean FRC
 848         if [ -x ./config.status ]; then           \
 849             ./config.status;                      \
 850         else                                      \
 851             ./configure --enable-maintainer-mode; \
 852         fi
 853         $(MAKE) $(MFLAGS) info all
 854
 855 .PHONY: check-declare
 856
 857 check-declare:
 858         @if [ ! -e $(srcdir)/src/emacs ]; then \
 859           echo "You must build Emacs to use this command"; \
 860           exit 1; \
 861         fi
 862         (cd leim; $(MAKE) $(MFLAGS) $@)
 863         (cd lisp; $(MAKE) $(MFLAGS) $@)