dired-x tweaks

[emacs.git] / man / msdog.texi

@c This is part of the Emacs manual.
@c Copyright (C) 1985, 86, 87, 93, 94, 95, 1997 Free Software Foundation, Inc.
@c See file emacs.texi for copying conditions.
@node MS-DOS, Manifesto, Antinews, Top
@appendix Emacs and MS-DOS 
@cindex MS-DOG
@cindex MS-DOS peculiarities

  This section briefly describes the peculiarities of using Emacs under
the MS-DOS ``operating system'' (also known as ``MS-DOG'').  If you
build Emacs for MS-DOS, the binary will also run on Windows 3.X, Windows
NT, Windows 9X, or OS/2 as a DOS application; the information in this
chapter applies for all of those systems, if you use an Emacs that was
built for MS-DOS.

  Note that it is possible to build Emacs specifically for Windows NT or
Windows 9X.  If you do that, most of this chapter does not apply;
instead, you get behavior much closer to what is documented in the rest
of the manual, including support for long file names, multiple frames,
scroll bars, mouse menus, and subprocesses.  However, the section on
text files and binary files does still apply.  There are also two
sections at the end of this chapter which apply specifically for Windows
NT and 9X.

@menu
* Input: MS-DOS Input.         Keyboard and mouse usage on MS-DOS.
* Display: MS-DOS Display.     Fonts, frames and display size on MS-DOS.
* Files: MS-DOS File Names.    File name conventions on MS-DOS.
* Text and Binary::            Text files on MS-DOS use CRLF to separate lines.
* Printing: MS-DOS Printing.   How to specify the printer on MS-DOS.
* I18N: MS-DOS and MULE.       Support for internationalization on MS-DOS.
* Processes: MS-DOS Processes. Running subprocesses on MS-DOS.
* Windows Processes::          Running subprocesses on Windows.
* Windows System Menu::        Controlling what the ALT key does.
@end menu

@node MS-DOS Input
@section Keyboard and Mouse on MS-DOS

@cindex Meta (under MS-DOS)
@cindex Hyper (under MS-DOS)
@cindex Super (under MS-DOS)
@vindex dos-super-key
@vindex dos-hyper-key
  The PC keyboard maps use the left @key{ALT} key as the @key{META} key.
You have two choices for emulating the @key{SUPER} and @key{HYPER} keys:
choose either the right @key{CTRL} key or the right @key{ALT} key by
setting the variables @code{dos-hyper-key} and @code{dos-super-key} to 1
or 2 respectively.  If neither @code{dos-super-key} nor
@code{dos-hyper-key} is 1, then by default the right @key{ALT} key is
also mapped to the @key{META} key.  However, if the MS-DOS international
keyboard support program @file{KEYB.COM} is installed, Emacs will
@emph{not} map the right @key{ALT} to @key{META}, since it is used for
accessing characters like @kbd{~} and @kbd{@@} on non-US keyboard
layouts; in this case, you may only use the left @key{ALT} as @key{META}
key.

@kindex C-j @r{(MS-DOS)}
@vindex dos-keypad-mode
  The variable @code{dos-keypad-mode} is a flag variable that controls
what key codes are returned by keys in the numeric keypad.  You can also
define the keypad @key{ENTER} key to act like @kbd{C-j}, by putting the
following line into your @file{_emacs} file:

@smallexample
;; Make the Enter key from the Numeric keypad act as C-j.
(define-key function-key-map [kp-enter] [?\C-j])
@end smallexample

@kindex DEL @r{(MS-DOS)}
@kindex BS @r{(MS-DOS)}
  The key that is called @key{DEL} in Emacs (because that's how it is
designated on most workstations) is known as @key{BS} (backspace) on a
PC.  That is why the PC-specific terminal initialization remaps the
@key{BS} key to act as @key{DEL}; the @key{DEL} key is remapped to act
as @kbd{C-d} for the same reasons.

@kindex C-g @r{(MS-DOS)}
@kindex C-BREAK @r{(MS-DOS)}
@cindex quitting on MS-DOS
  Emacs built for MS-DOS recognizes @kbd{C-@key{BREAK}} as a quit
character, just like @kbd{C-g}.  This is because Emacs cannot detect
that you have typed @kbd{C-g} until it is ready for more input.  As a
consequence, you cannot use @kbd{C-g} to stop a running command
(@pxref{Quitting}).  By contrast, @kbd{C-@key{BREAK}} @emph{is} detected
as soon as you type it (as @kbd{C-g} is on other systems), so it can be
used to stop a running command and for emergency escape
(@pxref{Emergency Escape}).

@cindex mouse support under MS-DOS
  Emacs on MS-DOS supports a mouse (on the default terminal only).
The mouse commands work as documented, including those that use menus
and the menu bar (@pxref{Menu Bar}).  Scroll bars don't work in
MS-DOS Emacs.  PC mice usually have only two buttons; these act as
@kbd{Mouse-1} and @kbd{Mouse-2}, but if you press both of them
together, that has the effect of @kbd{Mouse-3}.  If the mouse does have
3 buttons, Emacs detects that at startup, and all the 3 buttons function
normally, as on X.

@cindex mouse, set number of buttons
@findex msdos-set-mouse-buttons
  Some versions of mouse drivers don't report the number of mouse
buttons correctly.  For example, mice with a wheel report that they have
3 buttons, but only 2 of them are passed to Emacs; the clicks on the
wheel, which serves as the middle button, are not passed.  In these
cases, you can use the @kbd{M-x msdos-set-mouse-buttons} command to set
the notion of number of buttons used by Emacs.  This command prompts for
the number of buttons, and forces Emacs to behave as if your mouse had
that number of buttons.  You could make such a setting permanent by
adding this fragment to your @file{_emacs} init file:

@example
 ;; Force Emacs to behave as if the mouse had 
 ;; only 2 buttons
 (msdos-set-mouse-buttons 2)
@end example

@cindex Windows clipboard support
  Emacs built for MS-DOS supports clipboard operations when it runs on
Windows.  Commands that put text on the kill ring, or yank text from the
ring, check the Windows clipboard first, just as Emacs does on X Windows
(@pxref{Mouse Commands}).  Only the primary selection and the cut buffer
are supported by MS-DOS Emacs on Windows; the secondary selection always
appears as empty.

  Due to the way clipboard access is implemented by Windows, the
length of text you can put into the clipboard is limited by the amount
of free DOS memory that is available to Emacs.  Usually, up to 620KB of
text can be put into the clipboard, but this limit depends on the system
configuration and is lower if you run Emacs as a subprocess of
another program.  If the killed text does not fit, Emacs prints a
message saying so, and does not put the text into the clipboard.

  Null characters also cannot be put into the Windows clipboard.  If the
killed text includes null characters, Emacs does not put such text into
the clipboard, and prints in the echo area a message to that effect.

@vindex dos-display-scancodes
  The variable @code{dos-display-scancodes}, when non-@code{nil},
directs Emacs to display the ASCII value and the keyboard scan code of
each keystroke; this feature serves as a complement to the
@code{view-lossage} command, for debugging.

@node MS-DOS Display
@section Display on MS-DOS
@cindex faces under MS-DOS
@cindex fonts, emulating under MS-DOS

  Display on MS-DOS cannot use font variants, like bold or italic,
but it does support
multiple faces, each of which can specify a foreground and a background
color.  Therefore, you can get the full functionality of Emacs packages
that use fonts (such as @code{font-lock}, Enriched Text mode, and
others) by defining the relevant faces to use different colors.  Use the
@code{list-colors-display} command (@pxref{Frame Parameters}) and the
@code{list-faces-display} command (@pxref{Faces}) to see what colors and
faces are available and what they look like.

  The section @ref{MS-DOS and MULE}, later in this chapter, describes
how Emacs displays glyphs and characters which aren't supported by the
native font built into the DOS display.

@cindex cursor shape on MS-DOS
  When Emacs starts, it changes the cursor shape to a solid box.  This
is for compatibility with the Unix version, where the box cursor is the
default.  This default shape can be changed to a bar by specifying the
@code{cursor-type} parameter in the variable @code{default-frame-alist}
(@pxref{Creating Frames}).  The MS-DOS terminal doesn't support a
vertical-bar cursor, so the bar cursor is horizontal, and the
@code{@var{width}} parameter, if specified by the frame parameters,
actually determines its height.  As an extension, the bar cursor
specification can include the starting scan line of the cursor as well
as its width, like this:

@example
 '(cursor-type bar @var{width} . @var{start})
@end example

@noindent
In addition, if the @var{width} parameter is negative, the cursor bar
begins at the top of the character cell.

@cindex frames on MS-DOS
  Multiple frames (@pxref{Frames}) are supported on MS-DOS, but they all
overlap, so you only see a single frame at any given moment.  That
single visible frame occupies the entire screen.  When you run Emacs
from MS-Windows DOS box, you can make the visible frame smaller than
the full screen, but Emacs still cannot display more than a single
frame at a time.

@cindex frame size under MS-DOS
@findex mode4350
@findex mode25
  The @code{mode4350} command switches the display to 43 or 50
lines, depending on your hardware; the @code{mode25} command switches
to the default 80x25 screen size.

  By default, Emacs only knows how to set screen sizes of 80 columns by
25, 28, 35, 40, 43 or 50 rows.  However, if your video adapter has
special video modes that will switch the display to other sizes, you can
have Emacs support those too.  When you ask Emacs to switch the frame to
@var{n} rows by @var{m} columns dimensions, it checks if there is a
variable called @code{screen-dimensions-@var{n}x@var{m}}, and if so,
uses its value (which must be an integer) as the video mode to switch
to.  (Emacs switches to that video mode by calling the BIOS @code{Set
Video Mode} function with the value of
@code{screen-dimensions-@var{n}x@var{m}} in the @code{AL} register.)
For example, suppose your adapter will switch to 66x80 dimensions when
put into video mode 85.  Then you can make Emacs support this screen
size by putting the following into your @file{_emacs} file:

@example
(setq screen-dimensions-66x80 85)
@end example

  Since Emacs on MS-DOS can only set the frame size to specific
supported dimensions, it cannot honor every possible frame resizing
request.  When an unsupported size is requested, Emacs chooses the next
larger supported size beyond the specified size.  For example, if you
ask for 36x80 frame, you will get 40x80 instead.

  The variables @code{screen-dimensions-@var{n}x@var{m}} are used only
when they exactly match the specified size; the search for the next
larger supported size ignores them.  In the above example, even if your
VGA supports 38x80 dimensions and you define a variable
@code{screen-dimensions-38x80} with a suitable value, you will still get
40x80 screen when you ask for a 36x80 frame.  If you want to get the
38x80 size in this case, you can do it by setting the variable named
@code{screen-dimensions-36x80} with the same video mode value as
@code{screen-dimensions-38x80}.

  Changing frame dimensions on MS-DOS has the effect of changing all the
other frames to the new dimensions.

@node MS-DOS File Names
@section File Names on MS-DOS
@cindex file names under MS-DOS
@cindex init file, default name under MS-DOS

  MS-DOS normally uses a backslash, @samp{\}, to separate name units
within a file name, instead of the slash used on other systems.  Emacs
on MS-DOS permits use of either slash or backslash, and also knows
about drive letters in file names.

  On MS-DOS, file names are case-insensitive and limited to eight
characters, plus optionally a period and three more characters.  Emacs
knows enough about these limitations to handle file names that were
meant for other operating systems.  For instance, leading dots @samp{.}
in file names are invalid in MS-DOS, so Emacs transparently converts
them to underscores @samp{_}; thus your default init file (@pxref{Init
File}) is called @file{_emacs} on MS-DOS.  Excess characters before or
after the period are generally ignored by MS-DOS itself; thus, if you
visit the file @file{LongFileName.EvenLongerExtension}, you will
silently get @file{longfile.eve}, but Emacs will still display the long
file name on the mode line.  Other than that, it's up to you to specify
file names which are valid under MS-DOS; the transparent conversion as
described above only works on file names built into Emacs.

@cindex backup file names on MS-DOS
  The above restrictions on the file names on MS-DOS make it almost
impossible to construct the name of a backup file (@pxref{Backup
Names}) without losing some of the original file name characters.  For
example, the name of a backup file for @file{docs.txt} is
@file{docs.tx~} even if single backup is used.

@cindex file names under Windows 95/NT
@cindex long file names in DOS box under Windows 95/NT
  If you run Emacs as a DOS application under Windows 9X, you can
turn on support for long file names.  If you do that, Emacs doesn't
truncate file names or convert them to lower case; instead, it uses the
file names that you specify, verbatim.  To enable long file name
support, set the environment variable @env{LFN} to @samp{y} before
starting Emacs.  Unfortunately, Windows NT doesn't allow DOS programs to
access long file names, so Emacs built for MS-DOS will only see their
short 8+3 aliases.

@cindex @env{HOME} directory under MS-DOS
  MS-DOS has no notion of home directory, so Emacs on MS-DOS pretends
that the directory where it is installed is the value of @env{HOME}
environment variable.  That is, if your Emacs binary,
@file{emacs.exe}, is in the directory @file{c:/utils/emacs/bin}, then
Emacs acts as if @env{HOME} were set to @samp{c:/utils/emacs}.  In
particular, that is where Emacs looks for the init file @file{_emacs}.
With this in mind, you can use @samp{~} in file names as an alias for
the home directory, as you would in Unix.  You can also set @env{HOME}
variable in the environment before starting Emacs; its value will then
override the above default behavior.

  Emacs on MS-DOS handles the directory name @file{/dev} specially,
because of a feature in the emulator libraries of DJGPP that pretends
I/O devices have names in that directory.  We recommend that you avoid
using an actual directory named @file{/dev} on any disk.

@node Text and Binary
@section Text Files and Binary Files
@cindex text and binary files on MS-DOS/MS-Windows

  GNU Emacs uses newline characters to separate text lines.  This is the
convention used on Unix, on which GNU Emacs was developed, and on GNU
systems since they are modeled on Unix.

@cindex end-of-line conversion on MS-DOS/MS-Windows
  MS-DOS and MS-Windows normally use carriage-return linefeed, a
two-character sequence, to separate text lines.  (Linefeed is the same
character as newline.)  Therefore, convenient editing of typical files
with Emacs requires conversion of these end-of-line (EOL) sequences.
And that is what Emacs normally does: it converts carriage-return
linefeed into newline when reading files, and converts newline into
carriage-return linefeed when writing files.  The same mechanism that
handles conversion of international character codes does this conversion
also (@pxref{Coding Systems}).

@cindex cursor location, on MS-DOS
@cindex point location, on MS-DOS
  One consequence of this special format-conversion of most files is
that character positions as reported by Emacs (@pxref{Position Info}) do
not agree with the file size information known to the operating system.

  In addition, if Emacs recognizes from a file's contents that it uses
newline rather than carriage-return linefeed as its line separator, it
does not perform EOL conversion when reading or writing that file.  Thus,
you can read and edit files from Unix or GNU systems on MS-DOS with no
special effort, and they will be left with their Unix-style EOLs.

  The mode line indicates whether end-of-line translation was used for
the current buffer.  If MS-DOS end-of-line translation is in use for the
buffer, a backslash @samp{\} is displayed after the coding system
mnemonic near the beginning of the mode line (@pxref{Mode Line}).  If no
EOL translation was performed, the string @samp{(Unix)} is displayed
instead of the backslash, to alert you that the file's EOL format is not
the usual carriage-return linefeed.

@cindex DOS-to-Unix conversion of files
@pindex dos2unix
  End-of-line conversion is part of the general coding system conversion
mechanism, so the way to control whether to treat a text file as
DOS-style or Unix-style is with the commands for specifying a coding
system (@pxref{Specify Coding}).  For example, @kbd{C-x @key{RET} c unix
@key{RET} C-x C-f foobar.txt} visits the file @file{foobar.txt} without
converting the EOLs; if that file has carriage-return linefeed pairs at
the end of its lines, Emacs will display @samp{^M} at the end of each
line.  Similarly, you can force Emacs to save a buffer with specific EOL
format with the @kbd{C-x @key{RET} f} command.  For example, to save a
buffer with Unix EOL format, type @kbd{C-x @key{RET} f unix @key{RET}
C-x C-s}.  Thus, visiting a file with DOS EOL conversion, then saving it
with Unix EOL format effectively converts the file to Unix text style,
like the popular program @code{dos2unix} does.

@cindex untranslated file system
@findex add-untranslated-filesystem
  When you use NFS or Samba to access file systems that reside on
computers using Unix or GNU systems, Emacs should not perform
end-of-line translation on any files in these file systems--not even
when you create a new file.  To request this, designate these file
systems as @dfn{untranslated} file systems by calling the function
@code{add-untranslated-filesystem}.  It takes one argument: the file
system name, including a drive letter and optionally a directory.  For
example,

@example
(add-untranslated-filesystem "Z:")
@end example

@noindent
designates drive Z as an untranslated file system, and

@example
(add-untranslated-filesystem "Z:\\foo")
@end example

@noindent
designates directory @file{\foo} on drive Z as an untranslated file
system.

  Most often you would use @code{add-untranslated-filesystem} in your
@file{_emacs} file, or in @file{site-start.el} so that all the users at
your site get the benefit of it.

@findex remove-untranslated-filesystem
  To countermand the effect of @code{add-untranslated-filesystem}, use
the function @code{remove-untranslated-filesystem}.  This function takes
one argument, which should be a string just like the one that was used
previously with @code{add-untranslated-filesystem}.

  Designating a file system as untranslated does @strong{not} disable
code conversions as specified by the coding systems set up by your
language environment, it only affects the EOL conversions, by forcing
Emacs to create new files with Unix-style newline-only EOLs.

@vindex file-name-buffer-file-type-alist
@cindex binary files, on MS-DOS/MS-Windows
  Some kinds of files should not be converted at all, because their
contents are not really text.  Therefore, Emacs on MS-DOS distinguishes
certain files as @dfn{binary files}.  (This distinction is not part of
MS-DOS; it is made by Emacs only.)  Binary files include executable
programs, compressed archives, etc.  Emacs uses the file name to decide
whether to treat a file as binary: the variable
@code{file-name-buffer-file-type-alist} defines the file-name patterns
that indicate binary files.  If a file name matches one of the patterns
for binary files (those whose associations are of the type
@code{(@var{pattern} . t)}, Emacs reads and writes that file using the
@code{no-conversion} coding system (@pxref{Coding Systems}) which turns
off @emph{all} coding-system conversions, not only the EOL conversion.
@code{file-name-buffer-file-type-alist} also includes file-name patterns
for files which are known to be DOS-style text files with
carriage-return linefeed EOL format, such as @file{CONFIG.SYS}; Emacs
always writes those files with DOS-style EOLs.

  If a file which belongs to an untranslated file system matches one of
the file-name patterns in @code{file-name-buffer-file-type-alist}, the
EOL conversion is determined by @code{file-name-buffer-file-type-alist}.

@findex find-file-text
@findex find-file-binary
  You can visit a file and specify whether to treat it as text or binary
using the commands @code{find-file-text} and @code{find-file-binary}.
@code{find-file-text} specifies DOS EOL conversions, but leaves the
other coding conversions unspecified (Emacs determines the required
conversions via the usual defaults and coding-detection mechanisms).  On
the other hand, @code{find-file-binary} turns off @emph{all}
coding-system conversions.

@findex find-file-literally@r{, and binary files}
  The @code{find-file-text} and @code{find-file-binary} commands are
only available when Emacs runs on MS-DOS or MS-Windows.  The command
@code{find-file-literally}, which is available on all platforms,
produces the same effect as @code{find-file-binary}.

@node MS-DOS Printing
@section Printing and MS-DOS

  Printing commands, such as @code{lpr-buffer} (@pxref{Hardcopy}) and
@code{ps-print-buffer} (@pxref{PostScript}) can work in MS-DOS and
MS-Windows by sending the output to one of the printer ports, if a
Unix-style @code{lpr} program is unavailable.  This behaviour is
controlled by the same variables that control printing with @code{lpr}
on Unix (@pxref{Hardcopy}, @pxref{PostScript Variables}), but the
defaults for these variables on MS-DOS and MS-Windows are not the same
as the defaults on Unix.

@vindex printer-name @r{(MS-DOS)}
  If you want to use your local printer, printing on it in the usual DOS
manner, then set the Lisp variable @code{lpr-command} to @code{""} (its
default value) and @code{printer-name} to the name of the printer
port---for example, @code{"PRN"}, the usual local printer port (that's
the default), or @code{"LPT2"}, or @code{"COM1"} for a serial printer.
You can also set @code{printer-name} to a file name, in which case
``printed'' output is actually appended to that file.  If you set
@code{printer-name} to @code{"NUL"}, printed output is silently
discarded (sent to the system null device).

  On MS-Windows, when the Windows network software is installed, you can
also use a printer shared by another machine by setting
@code{printer-name} to the UNC share name for that printer--for example,
@code{"//joes_pc/hp4si"}.  (It doesn't matter whether you use forward
slashes or backslashes here.)  To find out the names of shared printers,
run the command @samp{net view} at a DOS command prompt to obtain a list
of servers, and @samp{net view @var{server-name}} to see the names of printers
(and directories) shared by that server.

  If you set @code{printer-name} to a file name, it's best to use an
absolute file name.  Emacs changes the working directory according to
the default directory of the current buffer, so if the file name in
@code{printer-name} is relative, you will end up with several such
files, each one in the directory of the buffer from which the printing
was done.

@findex print-buffer @r{(MS-DOS)}
@findex print-region @r{(MS-DOS)}
@vindex lpr-headers-switches @r{(MS-DOS)}
  The commands @code{print-buffer} and @code{print-region} call the
@code{pr} program, or use special switches to the @code{lpr} program, to
produce headers on each printed page.  MS-DOS and MS-Windows don't
normally have these programs, so by default, the variable
@code{lpr-headers-switches} is set so that the requests to print page
headers are silently ignored.  Thus, @code{print-buffer} and
@code{print-region} produce the same output as @code{lpr-buffer} and
@code{lpr-region}, respectively.  If you do have a suitable @code{pr}
program (for example, from GNU Textutils), set
@code{lpr-headers-switches} to @code{nil}; Emacs will then call
@code{pr} to produce the page headers, and print the resulting output as
specified by @code{printer-name}.

@vindex print-region-function @r{(MS-DOS)}
@cindex lpr usage under MS-DOS
@vindex lpr-command @r{(MS-DOS)}
@vindex lpr-switches @r{(MS-DOS)}
  Finally, if you do have an @code{lpr} work-alike, you can set the
variable @code{lpr-command} to @code{"lpr"}.  Then Emacs will use
@code{lpr} for printing, as on other systems.  (If the name of the
program isn't @code{lpr}, set @code{lpr-command} to specify where to
find it.)  The variable @code{lpr-switches} has its standard meaning
when @code{lpr-command} is not @code{""}.  If the variable
@code{printer-name} has a string value, it is used as the value for the
@code{-P} option to @code{lpr}, as on Unix.

@findex ps-print-buffer @r{(MS-DOS)}
@findex ps-spool-buffer @r{(MS-DOS)}
@vindex ps-printer-name @r{(MS-DOS)}
@vindex ps-lpr-command @r{(MS-DOS)}
@vindex ps-lpr-switches @r{(MS-DOS)}
  A parallel set of variables, @code{ps-lpr-command},
@code{ps-lpr-switches}, and @code{ps-printer-name} (@pxref{PostScript
Variables}), defines how PostScript files should be printed.  These
variables are used in the same way as the corresponding variables
described above for non-PostScript printing.  Thus, the value of
@code{ps-printer-name} is used as the name of the device (or file) to
which PostScript output is sent, just as @code{printer-name} is used for
non-PostScript printing.  (There are two distinct sets of variables in
case you have two printers attached to two different ports, and only one
of them is a PostScript printer.)

  The default value of the variable @code{ps-lpr-command} is @code{""},
which causes PostScript output to be sent to the printer port specified
by @code{ps-printer-name}, but @code{ps-lpr-command} can also be set to
the name of a program which will accept PostScript files.  Thus, if you
have a non-PostScript printer, you can set this variable to the name of
a PostScript interpreter program (such as Ghostscript).  Any switches
that need to be passed to the interpreter program are specified using
@code{ps-lpr-switches}.  (If the value of @code{ps-printer-name} is a
string, it will be added to the list of switches as the value for the
@code{-P} option.  This is probably only useful if you are using
@code{lpr}, so when using an interpreter typically you would set
@code{ps-printer-name} to something other than a string so it is
ignored.)

  For example, to use Ghostscript for printing on an Epson printer
connected to the @samp{LPT2} port, put this in your @file{_emacs} file:

@example
(setq ps-printer-name t)  ; Ghostscript doesn't understand -P
(setq ps-lpr-command "c:/gs/gs386")
(setq ps-lpr-switches '("-q" "-dNOPAUSE"
                        "-sDEVICE=epson"
                        "-r240x72"
                        "-sOutputFile=LPT2"
                        "-Ic:/gs"))
@end example

@noindent
(This assumes that Ghostscript is installed in the @file{"c:/gs"}
directory.)

@vindex dos-printer
@vindex dos-ps-printer
  For backwards compatibility, the value of @code{dos-printer}
(@code{dos-ps-printer}), if it has a value, overrides the value of
@code{printer-name} (@code{ps-printer-name}), on MS-DOS and MS-Windows
only.


@node MS-DOS and MULE
@section International Support on MS-DOS
@cindex international support @r{(MS-DOS)}

  Emacs on MS-DOS supports the same international character sets as it
does on Unix and other platforms (@pxref{International}), including
coding systems for converting between the different character sets.
However, due to incompatibilities between MS-DOS/MS-Windows and Unix,
there are several DOS-specific aspects of this support that users should
be aware of.  This section describes these aspects.

@table @kbd
@item M-x dos-codepage-setup
Set up Emacs display and coding systems as appropriate for the current
DOS codepage.

@item M-x codepage-setup
Create a coding system for a certain DOS codepage.
@end table

@cindex codepage, MS-DOS
@cindex DOS codepages
  MS-DOS is designed to support one character set of 256 characters at
any given time, but gives you a variety of character sets to choose
from.  The alternative character sets are known as @dfn{DOS codepages}.
Each codepage includes all 128 ASCII characters, but the other 128
characters (codes 128 through 255) vary from one codepage to another.
Each DOS codepage is identified by a 3-digit number, such as 850, 862,
etc.

  In contrast to X Windows, which lets you use several fonts at the same
time, MS-DOS doesn't allow use of several codepages in a single session.
Instead, MS-DOS loads a single codepage at system startup, and you must
reboot MS-DOS to change it@footnote{Normally, one particular codepage is
burnt into the display memory, while other codepages can be installed by
modifying system configuration files, such as @file{CONFIG.SYS}, and
rebooting.}.  Much the same limitation applies when you run DOS
executables on other systems such as MS-Windows.

@cindex unibyte operation @r{(MS-DOS)}
  If you invoke Emacs on MS-DOS with the @samp{--unibyte} option
(@pxref{Initial Options}), Emacs does not perform any conversion of
non-ASCII characters.  Instead, it reads and writes any non-ASCII
characters verbatim, and sends their 8-bit codes to the display
verbatim.  Thus, unibyte Emacs on MS-DOS supports the current codepage,
whatever it may be, but cannot even represent any other characters.

@vindex dos-codepage
  For multibyte operation on MS-DOS, Emacs needs to know which
characters the chosen DOS codepage can display.  So it queries the
system shortly after startup to get the chosen codepage number, and
stores the number in the variable @code{dos-codepage}.  Some systems
return the default value 437 for the current codepage, even though the
actual codepage is different.  (This typically happens when you use the
codepage built into the display hardware.)  You can specify a different
codepage for Emacs to use by setting the variable @code{dos-codepage} in
your init file.

@cindex language environment, automatic selection on @r{MS-DOS}
  Multibyte Emacs supports only certain DOS codepages: those which can
display Far-Eastern scripts, like the Japanese codepage 932, and those
that encode a single ISO 8859 character set.

  The Far-Eastern codepages can directly display one of the MULE
character sets for these countries, so Emacs simply sets up to use the
appropriate terminal coding system that is supported by the codepage.
The special features described in the rest of this section mostly
pertain to codepages that encode ISO 8859 character sets.

  For the codepages which correspond to one of the ISO character sets,
Emacs knows the character set name based on the codepage number.  Emacs
automatically creates a coding system to support reading and writing
files that use the current codepage, and uses this coding system by
default.  The name of this coding system is @code{cp@var{nnn}}, where
@var{nnn} is the codepage number.@footnote{The standard Emacs coding
systems for ISO 8859 are not quite right for the purpose, because
typically the DOS codepage does not match the standard ISO character
codes.  For example, the letter @samp{@,{c}} (@samp{c} with cedilla) has
code 231 in the standard Latin-1 character set, but the corresponding
DOS codepage 850 uses code 135 for this glyph.}

@cindex mode line @r{(MS-DOS)}
  All the @code{cp@var{nnn}} coding systems use the letter @samp{D} (for
``DOS'') as their mode-line mnemonic.  Since both the terminal coding
system and the default coding system for file I/O are set to the proper
@code{cp@var{nnn}} coding system at startup, it is normal for the mode
line on MS-DOS to begin with @samp{-DD\-}.  @xref{Mode Line}.
Far-Eastern DOS terminals do not use the @code{cp@var{nnn}} coding
systems, and thus their initial mode line looks like on Unix.

  Since the codepage number also indicates which script you are using,
Emacs automatically runs @code{set-language-environment} to select the
language environment for that script (@pxref{Language Environments}).

  If a buffer contains a character belonging to some other ISO 8859
character set, not the one that the chosen DOS codepage supports, Emacs
displays it using a sequence of ASCII characters.  For example, if the
current codepage doesn't have a glyph for the letter @samp{@`o} (small
@samp{o} with a grave accent), it is displayed as @samp{@{`o@}}, where
the braces serve as a visual indication that this is a single character.
(This may look awkward for some non-Latin characters, such as those from
Greek or Hebrew alphabets, but it is still readable by a person who
knows the language.)  Even though the character may occupy several
columns on the screen, it is really still just a single character, and
all Emacs commands treat it as one.

@vindex dos-unsupported-character-glyph
  Not all characters in DOS codepages correspond to ISO 8859
characters---some are used for other purposes, such as box-drawing
characters and other graphics.  Emacs cannot represent these characters
internally, so when you read a file that uses these characters, they are
converted into a particular character code, specified by the variable
@code{dos-unsupported-character-glyph}.

  Emacs supports many other characters sets aside from ISO 8859, but it
cannot display them on MS-DOS.  So if one of these multibyte characters
appears in a buffer, Emacs on MS-DOS displays them as specified by the
@code{dos-unsupported-character-glyph} variable; by default, this glyph
is an empty triangle.  Use the @kbd{C-u C-x =} command to display the
actual code and character set of such characters.  @xref{Position Info}.

@findex codepage-setup
  By default, Emacs defines a coding system to support the current
codepage.  To define a coding system for some other codepage (e.g., to
visit a file written on a DOS machine in another country), use the
@kbd{M-x codepage-setup} command.  It prompts for the 3-digit code of
the codepage, with completion, then creates the coding system for the
specified codepage.  You can then use the new coding system to read and
write files, but you must specify it explicitly for the file command
when you want to use it (@pxref{Specify Coding}).

  These coding systems are also useful for visiting a file encoded using
a DOS codepage, using Emacs running on some other operating system.

@node MS-DOS Processes
@section Subprocesses on MS-DOS

@cindex compilation under MS-DOS
@cindex inferior processes under MS-DOS
@findex compile @r{(MS-DOS)}
@findex grep @r{(MS-DOS)}
  Because MS-DOS is a single-process ``operating system,''
asynchronous subprocesses are not available.  In particular, Shell
mode and its variants do not work.  Most Emacs features that use
asynchronous subprocesses also don't work on MS-DOS, including
spelling correction and GUD.  When in doubt, try and see; commands that
don't work print an error message saying that asynchronous processes
aren't supported.

  Compilation under Emacs with @kbd{M-x compile}, searching files with
@kbd{M-x grep} and displaying differences between files with @kbd{M-x
diff} do work, by running the inferior processes synchronously.  This
means you cannot do any more editing until the inferior process
finishes.

  By contrast, Emacs compiled as native Windows application
@strong{does} support asynchronous subprocesses.  @xref{Windows
Processes}.

@cindex printing under MS-DOS
  Printing commands, such as @code{lpr-buffer} (@pxref{Hardcopy}) and
@code{ps-print-buffer} (@pxref{PostScript}), work in MS-DOS by sending
the output to one of the printer ports.  @xref{MS-DOS Printing}.

  When you run a subprocess synchronously on MS-DOS, make sure the
program terminates and does not try to read keyboard input.  If the
program does not terminate on its own, you will be unable to terminate
it, because MS-DOS provides no general way to terminate a process.
Pressing @kbd{C-c} or @kbd{C-@key{BREAK}} might sometimes help in these
cases.

  Accessing files on other machines is not supported on MS-DOS.  Other
network-oriented commands such as sending mail, Web browsing, remote
login, etc., don't work either, unless network access is built into
MS-DOS with some network redirector.

@cindex directory listing on MS-DOS
@vindex dired-listing-switches @r{(MS-DOS)}
  Dired on MS-DOS uses the @code{ls-lisp} package where other
platforms use the system @code{ls} command.  Therefore, Dired on
MS-DOS supports only some of the possible options you can mention in
the @code{dired-listing-switches} variable.  The options that work are
@samp{-A}, @samp{-a}, @samp{-c}, @samp{-i}, @samp{-r}, @samp{-S},
@samp{-s}, @samp{-t}, and @samp{-u}.

@node Windows Processes
@section Subprocesses on Windows 95 and NT

Emacs compiled as a native Windows application (as opposed to the DOS
version) includes full support for asynchronous subprocesses.
In the Windows version, synchronous and asynchronous subprocesses work
fine on both
Windows 95 and Windows NT as long as you run only 32-bit Windows
applications.  However, when you run a DOS application in a subprocess,
you may encounter problems or be unable to run the application at all;
and if you run two DOS applications at the same time in two
subprocesses, you may have to reboot your system.

Since the standard command interpreter (and most command line utilities)
on Windows 95 are DOS applications, these problems are significant when
using that system.  But there's nothing we can do about them; only
Microsoft can fix them.

If you run just one DOS application subprocess, the subprocess should
work as expected as long as it is ``well-behaved'' and does not perform
direct screen access or other unusual actions.  If you have a CPU
monitor application, your machine will appear to be 100% busy even when
the DOS application is idle, but this is only an artifact of the way CPU
monitors measure processor load.

You must terminate the DOS application before you start any other DOS
application in a different subprocess.  Emacs is unable to interrupt or
terminate a DOS subprocess.  The only way you can terminate such a
subprocess is by giving it a command that tells its program to exit.

If you attempt to run two DOS applications at the same time in separate
subprocesses, the second one that is started will be suspended until the
first one finishes, even if either or both of them are asynchronous.

If you can go to the first subprocess, and tell it to exit, the second
subprocess should continue normally.  However, if the second subprocess
is synchronous, Emacs itself will be hung until the first subprocess
finishes.  If it will not finish without user input, then you have no
choice but to reboot if you are running on Windows 95.  If you are
running on Windows NT, you can use a process viewer application to kill
the appropriate instance of ntvdm instead (this will terminate both DOS
subprocesses).

If you have to reboot Windows 95 in this situation, do not use the
@code{Shutdown} command on the @code{Start} menu; that usually hangs the
system.  Instead, type @kbd{CTL-ALT-@key{DEL}} and then choose
@code{Shutdown}.  That usually works, although it may take a few minutes
to do its job.

@node Windows System Menu
@section Using the System Menu on Windows

Emacs compiled as a native Windows application normally turns off the
Windows feature that tapping the @key{ALT}
key invokes the Windows menu.  The reason is that the @key{ALT} also
serves as @key{META} in Emacs.  When using Emacs, users often press the
@key{META} key temporarily and then change their minds; if this has the
effect of bringing up the Windows menu, it alters the meaning of
subsequent commands.  Many users find this frustrating. 

@vindex w32-pass-alt-to-system
You can reenable Windows's default handling of tapping the @key{ALT} key
by setting @code{w32-pass-alt-to-system} to a non-@code{nil} value.