lisp/autorevert.el

   1 ;;; autorevert.el --- revert buffers when files on disk change
   2
   3 ;; Copyright (C) 1997, 1998, 1999, 2001, 2002, 2003, 2004,
   4 ;;   2005, 2006 Free Software Foundation, Inc.
   5
   6 ;; Author: Anders Lindgren <andersl@andersl.com>
   7 ;; Keywords: convenience
   8 ;; Created: 1997-06-01
   9 ;; Date: 1999-11-30
  10
  11 ;; This file is part of GNU Emacs.
  12
  13 ;; GNU Emacs is free software; you can redistribute it and/or modify
  14 ;; it under the terms of the GNU General Public License as published by
  15 ;; the Free Software Foundation; either version 2, or (at your option)
  16 ;; any later version.
  17
  18 ;; GNU Emacs is distributed in the hope that it will be useful,
  19 ;; but WITHOUT ANY WARRANTY; without even the implied warranty of
  20 ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21 ;; GNU General Public License for more details.
  22
  23 ;; You should have received a copy of the GNU General Public License
  24 ;; along with GNU Emacs; see the file COPYING.  If not, write to the
  25 ;; Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  26 ;; Boston, MA 02110-1301, USA.
  27
  28 ;;; Commentary:
  29
  30 ;; Introduction:
  31 ;;
  32 ;; Whenever a file that Emacs is editing has been changed by another
  33 ;; program the user normally has to execute the command `revert-buffer'
  34 ;; to load the new content of the file into Emacs.
  35 ;;
  36 ;; This package contains two minor modes: Global Auto-Revert Mode and
  37 ;; Auto-Revert Mode.  Both modes automatically revert buffers
  38 ;; whenever the corresponding files have been changed on disk and the
  39 ;; buffer contains no unsaved changes.
  40 ;;
  41 ;; Auto-Revert Mode can be activated for individual buffers.  Global
  42 ;; Auto-Revert Mode applies to all file buffers. (If the user option
  43 ;; `global-auto-revert-non-file-buffers' is non-nil, it also applies
  44 ;; to some non-file buffers.  This option is disabled by default.)
  45 ;; Since checking a remote file is too slow, these modes do not check
  46 ;; or revert remote files.
  47 ;;
  48 ;; Both modes operate by checking the time stamp of all files at
  49 ;; intervals of `auto-revert-interval'.  The default is every five
  50 ;; seconds.  The check is aborted whenever the user actually uses
  51 ;; Emacs.  You should never even notice that this package is active
  52 ;; (except that your buffers will be reverted, of course).
  53 ;;
  54 ;; After reverting a file buffer, Auto Revert Mode normally puts point
  55 ;; at the same position that a regular manual revert would.  However,
  56 ;; there is one exception to this rule.  If point is at the end of the
  57 ;; buffer before reverting, it stays at the end.  Similarly if point
  58 ;; is displayed at the end of a file buffer in any window, it will stay
  59 ;; at the end of the buffer in that window, even if the window is not
  60 ;; selected.  This way, you can use Auto Revert Mode to `tail' a file.
  61 ;; Just put point at the end of the buffer and it will stay there.
  62 ;; These rules apply to file buffers. For non-file buffers, the
  63 ;; behavior may be mode dependent.
  64 ;;
  65 ;; While you can use Auto Revert Mode to tail a file, this package
  66 ;; contains a third minor mode, Auto Revert Tail Mode, which does so
  67 ;; more efficiently, as long as you are sure that the file will only
  68 ;; change by growing at the end.  It only appends the new output,
  69 ;; instead of reverting the entire buffer.  It does so even if the
  70 ;; buffer contains unsaved changes.  (Because they will not be lost.)
  71
  72 ;; Usage:
  73 ;;
  74 ;; Go to the appropriate buffer and press either of:
  75 ;;   M-x auto-revert-mode RET
  76 ;;   M-x auto-revert-tail-mode RET
  77 ;;
  78 ;; To activate Global Auto-Revert Mode, press:
  79 ;;   M-x global-auto-revert-mode RET
  80 ;;
  81 ;; To activate Global Auto-Revert Mode every time Emacs is started
  82 ;; customise the option `global-auto-revert-mode' or the following
  83 ;; line could be added to your ~/.emacs:
  84 ;;   (global-auto-revert-mode 1)
  85 ;;
  86 ;; The function `turn-on-auto-revert-mode' could be added to any major
  87 ;; mode hook to activate Auto-Revert Mode for all buffers in that
  88 ;; mode.  For example, the following line will activate Auto-Revert
  89 ;; Mode in all C mode buffers:
  90 ;;
  91 ;; (add-hook 'c-mode-hook 'turn-on-auto-revert-mode)
  92
  93 ;;; Code:
  94
  95 ;; Dependencies:
  96
  97 (require 'timer)
  98
  99 (eval-when-compile (require 'cl))
 100
 101
 102 ;; Custom Group:
 103 ;;
 104 ;; The two modes will be placed next to Auto Save Mode under the
 105 ;; Files group under Emacs.
 106
 107 (defgroup auto-revert nil
 108   "Revert individual buffers when files on disk change.
 109
 110 Auto-Revert Mode can be activated for individual buffer.
 111 Global Auto-Revert Mode applies to all buffers."
 112   :group 'files
 113   :group 'convenience)
 114
 115
 116 ;; Variables:
 117
 118 ;;; What's this?: ;; Autoload for the benefit of `make-mode-line-mouse-sensitive'.
 119 ;;; What's this?: ;;;###autoload
 120 (defvar auto-revert-mode nil
 121   "*Non-nil when Auto-Revert Mode is active.
 122 Never set this variable directly, use the command `auto-revert-mode' instead.")
 123 (put 'auto-revert-mode 'permanent-local t)
 124
 125 (defvar auto-revert-tail-mode nil
 126   "*Non-nil when Auto-Revert Tail Mode is active.
 127 Never set this variable directly, use the command
 128 `auto-revert-tail-mode' instead.")
 129 (put 'auto-revert-tail-mode 'permanent-local t)
 130
 131 (defvar auto-revert-timer nil
 132   "Timer used by Auto-Revert Mode.")
 133
 134 (defcustom auto-revert-interval 5
 135   "Time, in seconds, between Auto-Revert Mode file checks.
 136 The value may be an integer or floating point number.
 137
 138 If a timer is already active, there are two ways to make sure
 139 that the new value will take effect immediately.  You can set
 140 this variable through Custom or you can call the command
 141 `auto-revert-set-timer' after setting the variable.  Otherwise,
 142 the new value will take effect the first time Auto Revert Mode
 143 calls `auto-revert-set-timer' for internal reasons or in your
 144 next editing session."
 145   :group 'auto-revert
 146   :type 'number
 147   :set (lambda (variable value)
 148          (set-default variable value)
 149          (and (boundp 'auto-revert-timer)
 150               auto-revert-timer
 151               (auto-revert-set-timer))))
 152
 153 (defcustom auto-revert-stop-on-user-input t
 154   "When non-nil, user input temporarily interrupts Auto-Revert Mode.
 155 With this setting, Auto-Revert Mode checks for user input after
 156 handling each buffer and does not process any further buffers
 157 \(until the next run of the timer) if user input is available.
 158 When nil, Auto-Revert Mode checks files and reverts buffers,
 159 with quitting disabled, without paying attention to user input.
 160 Thus, with this setting, Emacs might be non-responsive at times."
 161   :group 'auto-revert
 162   :type 'boolean)
 163
 164 (defcustom auto-revert-verbose t
 165   "When nil, Auto-Revert Mode does not generate any messages.
 166 When non-nil, a message is generated whenever a file is reverted."
 167   :group 'auto-revert
 168   :type 'boolean)
 169
 170 (defcustom auto-revert-mode-text " ARev"
 171   "String to display in the mode line when Auto-Revert Mode is active.
 172
 173 \(When the string is not empty, make sure that it has a leading space.)"
 174   :tag "Auto Revert Mode Text"          ; To separate it from `global-...'
 175   :group 'auto-revert
 176   :type 'string)
 177
 178 (defcustom auto-revert-tail-mode-text " Tail"
 179   "String to display in the mode line when Auto-Revert Tail Mode is active.
 180
 181 \(When the string is not empty, make sure that it has a leading space.)"
 182   :group 'auto-revert
 183   :type 'string
 184   :version "22.1")
 185
 186 (defcustom auto-revert-mode-hook nil
 187   "Functions to run when Auto-Revert Mode is activated."
 188   :tag "Auto Revert Mode Hook"          ; To separate it from `global-...'
 189   :group 'auto-revert
 190   :type 'hook)
 191
 192 (defcustom global-auto-revert-mode-text ""
 193   "String to display when Global Auto-Revert Mode is active.
 194
 195 The default is nothing since when this mode is active this text doesn't
 196 vary over time, or between buffers.  Hence mode line text
 197 would only waste precious space."
 198   :group 'auto-revert
 199   :type 'string)
 200
 201 (defcustom global-auto-revert-mode-hook nil
 202   "Hook called when Global Auto-Revert Mode is activated."
 203   :group 'auto-revert
 204   :type 'hook)
 205
 206 (defcustom global-auto-revert-non-file-buffers nil
 207   "When nil, Global Auto-Revert mode operates only on file-visiting buffers.
 208
 209 When non-nil, both file buffers and buffers with a custom
 210 `revert-buffer-function' and a `buffer-stale-function' are
 211 reverted by Global Auto-Revert mode.  These include the Buffer
 212 List buffer, and Dired buffers showing complete local
 213 directories.  Dired buffers do not auto-revert as a result of
 214 changes in subdirectories or in the contents, size, modes, etc.,
 215 of files.  You may still sometimes want to revert them manually.
 216
 217 Use this option with care since it could lead to excessive auto-reverts.
 218 For more information, see Info node `(emacs)Autorevert'."
 219   :group 'auto-revert
 220   :type 'boolean
 221   :link '(info-link "(emacs)Autorevert"))
 222
 223 (defcustom global-auto-revert-ignore-modes ()
 224   "List of major modes Global Auto-Revert Mode should not check."
 225   :group 'auto-revert
 226   :type '(repeat sexp))
 227
 228 (defcustom auto-revert-load-hook nil
 229   "Functions to run when Auto-Revert Mode is first loaded."
 230   :tag "Load Hook"
 231   :group 'auto-revert
 232   :type 'hook)
 233
 234 (defcustom auto-revert-check-vc-info nil
 235   "If non-nil Auto Revert Mode reliably updates version control info.
 236 Auto Revert Mode updates version control info whenever the buffer
 237 needs reverting, regardless of the value of this variable.
 238 However, the version control state can change without changes to
 239 the work file.  If the change is made from the current Emacs
 240 session, all info is updated.  But if, for instance, a new
 241 version is checked in from outside the current Emacs session, the
 242 version control number in the mode line, as well as other version
 243 control related information, may not be properly updated.  If you
 244 are worried about this, set this variable to a non-nil value.
 245
 246 This currently works by automatically updating the version
 247 control info every `auto-revert-interval' seconds.  Nevertheless,
 248 it should not cause excessive CPU usage on a reasonably fast
 249 machine, if it does not apply to too many version controlled
 250 buffers.  CPU usage depends on the version control system."
 251   :group 'auto-revert
 252   :type 'boolean
 253   :version "22.1")
 254
 255 (defvar global-auto-revert-ignore-buffer nil
 256   "*When non-nil, Global Auto-Revert Mode will not revert this buffer.
 257
 258 This variable becomes buffer local when set in any fashion.")
 259 (make-variable-buffer-local 'global-auto-revert-ignore-buffer)
 260
 261 ;; Internal variables:
 262
 263 (defvar auto-revert-buffer-list ()
 264   "List of buffers in Auto-Revert Mode.
 265
 266 Note that only Auto-Revert Mode, never Global Auto-Revert Mode, adds
 267 buffers to this list.
 268
 269 The timer function `auto-revert-buffers' is responsible for purging
 270 the list of old buffers.")
 271
 272 (defvar auto-revert-remaining-buffers ()
 273   "Buffers not checked when user input stopped execution.")
 274
 275 (defvar auto-revert-tail-pos 0
 276   "Position of last known end of file.")
 277
 278 (add-hook 'find-file-hook
 279           (lambda ()
 280             (set (make-local-variable 'auto-revert-tail-pos)
 281                  (save-restriction (widen) (1- (point-max))))))
 282
 283 ;; Functions:
 284
 285 ;;;###autoload
 286 (define-minor-mode auto-revert-mode
 287   "Toggle reverting buffer when file on disk changes.
 288
 289 With arg, turn Auto Revert mode on if and only if arg is positive.
 290 This is a minor mode that affects only the current buffer.
 291 Use `global-auto-revert-mode' to automatically revert all buffers.
 292 Use `auto-revert-tail-mode' if you know that the file will only grow
 293 without being changed in the part that is already in the buffer."
 294   :group 'auto-revert :lighter auto-revert-mode-text
 295   (if auto-revert-mode
 296       (if (not (memq (current-buffer) auto-revert-buffer-list))
 297           (push (current-buffer) auto-revert-buffer-list))
 298     (setq auto-revert-buffer-list
 299           (delq (current-buffer) auto-revert-buffer-list)))
 300   (auto-revert-set-timer)
 301   (when auto-revert-mode
 302     (auto-revert-buffers)
 303     (setq auto-revert-tail-mode nil)))
 304
 305
 306 ;;;###autoload
 307 (defun turn-on-auto-revert-mode ()
 308   "Turn on Auto-Revert Mode.
 309
 310 This function is designed to be added to hooks, for example:
 311   (add-hook 'c-mode-hook 'turn-on-auto-revert-mode)"
 312   (auto-revert-mode 1))
 313
 314
 315 ;;;###autoload
 316 (define-minor-mode auto-revert-tail-mode
 317   "Toggle reverting tail of buffer when file on disk grows.
 318 With arg, turn Tail mode on iff arg is positive.
 319
 320 When Tail mode is enabled, the tail of the file is constantly
 321 followed, as with the shell command `tail -f'.  This means that
 322 whenever the file grows on disk (presumably because some
 323 background process is appending to it from time to time), this is
 324 reflected in the current buffer.
 325
 326 You can edit the buffer and turn this mode off and on again as
 327 you please.  But make sure the background process has stopped
 328 writing before you save the file!
 329
 330 Use `auto-revert-mode' for changes other than appends!"
 331   :group 'find-file :lighter auto-revert-tail-mode-text
 332   (when auto-revert-tail-mode
 333     (unless buffer-file-name
 334       (auto-revert-tail-mode 0)
 335       (error "This buffer is not visiting a file"))
 336     (if (and (buffer-modified-p)
 337              (not auto-revert-tail-pos) ; library was loaded only after finding file
 338              (not (y-or-n-p "Buffer is modified, so tail offset may be wrong.  Proceed? ")))
 339         (auto-revert-tail-mode 0)
 340       ;; else we might reappend our own end when we save
 341       (add-hook 'before-save-hook (lambda () (auto-revert-tail-mode 0)) nil t)
 342       (or (local-variable-p 'auto-revert-tail-pos) ; don't lose prior position
 343           (set (make-local-variable 'auto-revert-tail-pos)
 344                (save-restriction (widen) (1- (point-max)))))
 345       ;; let auto-revert-mode set up the mechanism for us if it isn't already
 346       (or auto-revert-mode
 347           (let ((auto-revert-tail-mode t))
 348             (auto-revert-mode 1)))
 349       (setq auto-revert-mode nil))))
 350
 351
 352 ;;;###autoload
 353 (defun turn-on-auto-revert-tail-mode ()
 354   "Turn on Auto-Revert Tail Mode.
 355
 356 This function is designed to be added to hooks, for example:
 357   (add-hook 'my-logfile-mode-hook 'turn-on-auto-revert-tail-mode)"
 358   (auto-revert-tail-mode 1))
 359
 360
 361 ;;;###autoload
 362 (define-minor-mode global-auto-revert-mode
 363   "Revert any buffer when file on disk changes.
 364
 365 With arg, turn Auto Revert mode on globally if and only if arg is positive.
 366 This is a minor mode that affects all buffers.
 367 Use `auto-revert-mode' to revert a particular buffer."
 368   :global t :group 'auto-revert :lighter global-auto-revert-mode-text
 369   (auto-revert-set-timer)
 370   (when global-auto-revert-mode
 371     (auto-revert-buffers)))
 372
 373
 374 (defun auto-revert-set-timer ()
 375   "Restart or cancel the timer used by Auto-Revert Mode.
 376 If such a timer is active, cancel it.  Start a new timer if
 377 Global Auto-Revert Mode is active or if Auto-Revert Mode is active
 378 in some buffer.  Restarting the timer ensures that Auto-Revert Mode
 379 will use an up-to-date value of `auto-revert-interval'"
 380   (interactive)
 381   (if (timerp auto-revert-timer)
 382       (cancel-timer auto-revert-timer))
 383   (setq auto-revert-timer
 384         (if (or global-auto-revert-mode auto-revert-buffer-list)
 385             (run-with-timer auto-revert-interval
 386                             auto-revert-interval
 387                             'auto-revert-buffers))))
 388
 389 (defun auto-revert-active-p ()
 390   "Check if auto-revert is active (in current buffer or globally)."
 391   (or auto-revert-mode
 392       auto-revert-tail-mode
 393       (and
 394        global-auto-revert-mode
 395        (not global-auto-revert-ignore-buffer)
 396        (not (memq major-mode
 397                   global-auto-revert-ignore-modes)))))
 398
 399 (defun auto-revert-handler ()
 400   "Revert current buffer, if appropriate.
 401 This is an internal function used by Auto-Revert Mode."
 402   (when (or auto-revert-tail-mode (not (buffer-modified-p)))
 403     (let* ((buffer (current-buffer))
 404            (revert
 405             (or (and buffer-file-name
 406                      (not (file-remote-p buffer-file-name))
 407                      (file-readable-p buffer-file-name)
 408                      (not (verify-visited-file-modtime buffer)))
 409                 (and (or auto-revert-mode
 410                          global-auto-revert-non-file-buffers)
 411                      revert-buffer-function
 412                      (boundp 'buffer-stale-function)
 413                      (functionp buffer-stale-function)
 414                      (funcall buffer-stale-function t))))
 415            eob eoblist)
 416       (when revert
 417         (when (and auto-revert-verbose
 418                    (not (eq revert 'fast)))
 419           (message "Reverting buffer `%s'." (buffer-name)))
 420         ;; If point (or a window point) is at the end of the buffer,
 421         ;; we want to keep it at the end after reverting.  This allows
 422         ;; to tail a file.
 423         (when buffer-file-name
 424           (setq eob (eobp))
 425           (walk-windows
 426            #'(lambda (window)
 427                (and (eq (window-buffer window) buffer)
 428                     (= (window-point window) (point-max))
 429                     (push window eoblist)))
 430            'no-mini t))
 431         (if auto-revert-tail-mode
 432             (auto-revert-tail-handler)
 433           ;; Bind buffer-read-only in case user has done C-x C-q,
 434           ;; so as not to forget that.  This gives undesirable results
 435           ;; when the file's mode changes, but that is less common.
 436           (let ((buffer-read-only buffer-read-only))
 437             (revert-buffer 'ignore-auto 'dont-ask 'preserve-modes)))
 438         (when buffer-file-name
 439           (when eob (goto-char (point-max)))
 440           (dolist (window eoblist)
 441             (set-window-point window (point-max)))))
 442       ;; `preserve-modes' avoids changing the (minor) modes.  But we
 443       ;; do want to reset the mode for VC, so we do it manually.
 444       (when (or revert auto-revert-check-vc-info)
 445         (vc-find-file-hook)))))
 446
 447 (defun auto-revert-tail-handler ()
 448   (let ((size (nth 7 (file-attributes buffer-file-name)))
 449         (modified (buffer-modified-p))
 450         buffer-read-only                ; ignore
 451         (file buffer-file-name)
 452         buffer-file-name)               ; ignore that file has changed
 453     (when (> size auto-revert-tail-pos)
 454       (undo-boundary)
 455       (save-restriction
 456         (widen)
 457         (save-excursion
 458           (goto-char (point-max))
 459           (insert-file-contents file nil auto-revert-tail-pos size)))
 460       (undo-boundary)
 461       (setq auto-revert-tail-pos size)
 462       (set-buffer-modified-p modified)))
 463   (set-visited-file-modtime))
 464
 465 (defun auto-revert-buffers ()
 466   "Revert buffers as specified by Auto-Revert and Global Auto-Revert Mode.
 467
 468 Should `global-auto-revert-mode' be active all file buffers are checked.
 469
 470 Should `auto-revert-mode' be active in some buffers, those buffers
 471 are checked.
 472
 473 Non-file buffers that have a custom `revert-buffer-function' and
 474 a `buffer-stale-function' are reverted either when Auto-Revert
 475 Mode is active in that buffer, or when the variable
 476 `global-auto-revert-non-file-buffers' is non-nil and Global
 477 Auto-Revert Mode is active.
 478
 479 This function stops whenever there is user input.  The buffers not
 480 checked are stored in the variable `auto-revert-remaining-buffers'.
 481
 482 To avoid starvation, the buffers in `auto-revert-remaining-buffers'
 483 are checked first the next time this function is called.
 484
 485 This function is also responsible for removing buffers no longer in
 486 Auto-Revert mode from `auto-revert-buffer-list', and for canceling
 487 the timer when no buffers need to be checked."
 488   (save-match-data
 489     (let ((bufs (if global-auto-revert-mode
 490                     (buffer-list)
 491                   auto-revert-buffer-list))
 492           (remaining ())
 493           (new ()))
 494       ;; Partition `bufs' into two halves depending on whether or not
 495       ;; the buffers are in `auto-revert-remaining-buffers'.  The two
 496       ;; halves are then re-joined with the "remaining" buffers at the
 497       ;; head of the list.
 498       (dolist (buf auto-revert-remaining-buffers)
 499         (if (memq buf bufs)
 500             (push buf remaining)))
 501       (dolist (buf bufs)
 502         (if (not (memq buf remaining))
 503             (push buf new)))
 504       (setq bufs (nreverse (nconc new remaining)))
 505       (while (and bufs
 506                   (not (and auto-revert-stop-on-user-input
 507                             (input-pending-p))))
 508         (let ((buf (car bufs)))
 509           (if (buffer-name buf)         ; Buffer still alive?
 510               (with-current-buffer buf
 511                 ;; Test if someone has turned off Auto-Revert Mode in a
 512                 ;; non-standard way, for example by changing major mode.
 513                 (if (and (not auto-revert-mode)
 514                          (not auto-revert-tail-mode)
 515                          (memq buf auto-revert-buffer-list))
 516                     (setq auto-revert-buffer-list
 517                           (delq buf auto-revert-buffer-list)))
 518                 (when (auto-revert-active-p) (auto-revert-handler)))
 519             ;; Remove dead buffer from `auto-revert-buffer-list'.
 520             (setq auto-revert-buffer-list
 521                   (delq buf auto-revert-buffer-list))))
 522         (setq bufs (cdr bufs)))
 523       (setq auto-revert-remaining-buffers bufs)
 524       ;; Check if we should cancel the timer.
 525       (when (and (not global-auto-revert-mode)
 526                  (null auto-revert-buffer-list))
 527         (cancel-timer auto-revert-timer)
 528         (setq auto-revert-timer nil)))))
 529
 530
 531 ;; The end:
 532 (provide 'autorevert)
 533
 534 (run-hooks 'auto-revert-load-hook)
 535
 536 ;;; arch-tag: f6bcb07b-4841-477e-9e44-b18678e58876
 537 ;;; autorevert.el ends here