Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # Copyright (C) 1992-2012  Free Software Foundation, Inc.
   6
   7 # This file is part of GNU Emacs.
   8
   9 # GNU Emacs is free software: you can redistribute it and/or modify
  10 # it under the terms of the GNU General Public License as published by
  11 # the Free Software Foundation, either version 3 of the License, or
  12 # (at your option) any later version.
  13
  14 # GNU Emacs is distributed in the hope that it will be useful,
  15 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  16 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17 # GNU General Public License for more details.
  18
  19 # You should have received a copy of the GNU General Public License
  20 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
  21
  22 ### Commentary:
  23
  24 # make all      to compile and build Emacs.
  25 # make install  to install it.
  26 # make TAGS     to update tags tables.
  27 #
  28 # make clean  or  make mostlyclean
  29 #      Delete all files from the current directory that are normally
  30 #      created by building the program.  Don't delete the files that
  31 #      record the configuration.  Also preserve files that could be made
  32 #      by building, but normally aren't because the distribution comes
  33 #      with them.
  34 #
  35 #      Delete `.dvi' files here if they are not part of the distribution.
  36 #
  37 # make distclean
  38 #      Delete all files from the current directory that are created by
  39 #      configuring or building the program.  If you have unpacked the
  40 #      source and built the program without creating any other files,
  41 #      `make distclean' should leave only the files that were in the
  42 #      distribution.
  43 #
  44 # make maintainer-clean
  45 #      Delete everything from the current directory that can be
  46 #      reconstructed with this Makefile.  This typically includes
  47 #      everything deleted by distclean, plus more: .elc files,
  48 #      C source files produced by Bison, tags tables, info files,
  49 #      and so on.
  50 #
  51 # make extraclean
  52 #      Still more severe - delete backup and autosave files, too.
  53 #
  54 # make bootstrap
  55 #      Removes all the compiled files to force a new bootstrap from a
  56 #      clean slate, and then build in the normal way.
  57
  58 SHELL = /bin/sh
  59
  60 # This may not work with certain non-GNU make's.  It only matters when
  61 # inheriting a CDPATH not starting with the current directory.
  62 CDPATH=
  63
  64 # If Make doesn't predefine MAKE, set it here.
  65 @SET_MAKE@
  66
  67 # ==================== Things `configure' Might Edit ====================
  68
  69 MAINTAINER_MODE_FLAG = --disable-maintainer-mode
  70 @MAINT@MAINTAINER_MODE_FLAG = --enable-maintainer-mode
  71 cache_file = @cache_file@
  72 CONFIGURE_FLAGS = --cache-file=$(cache_file) $(MAINTAINER_MODE_FLAG)
  73
  74 CC=@CC@
  75 CFLAGS=@CFLAGS@
  76 LDFLAGS=@LDFLAGS@
  77 CPPFLAGS=@CPPFLAGS@
  78 EXEEXT=@EXEEXT@
  79
  80 ### These help us choose version- and architecture-specific directories
  81 ### to install files in.
  82
  83 ### This should be the number of the Emacs version we're building,
  84 ### like `18.59' or `19.0'.
  85 version=@version@
  86
  87 ### This should be the name of the configuration we're building Emacs
  88 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  89 configuration=@configuration@
  90
  91 # ==================== Where To Install Things ====================
  92
  93 # The default location for installation.  Everything is placed in
  94 # subdirectories of this directory.  The default values for many of
  95 # the variables below are expressed in terms of this one, so you may
  96 # not need to change them.  This defaults to /usr/local.
  97 prefix=@prefix@
  98
  99 # Like `prefix', but used for architecture-specific files.
 100 exec_prefix=@exec_prefix@
 101
 102 # Where to install Emacs and other binaries that people will want to
 103 # run directly (like etags).
 104 bindir=@bindir@
 105
 106 # The root of the directory tree for read-only architecture-independent
 107 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 108 datarootdir=@datarootdir@
 109
 110 # Where to install architecture-independent data files.  ${lispdir}
 111 # and ${etcdir} are subdirectories of this.
 112 datadir=@datadir@
 113
 114 # Where to install and expect the files that Emacs modifies as it
 115 # runs.  These files are all architecture-independent.
 116 # Right now, this is not used.
 117 sharedstatedir=@sharedstatedir@
 118
 119 # Where to install and expect executable files to be run by Emacs
 120 # rather than directly by users, and other architecture-dependent
 121 # data.  ${archlibdir} is a subdirectory of this.
 122 libexecdir=@libexecdir@
 123
 124 # Where to install Emacs's man pages.
 125 # This used to allow choice of the numeric extension, but this made
 126 # little sense since the files were always installed in man1/
 127 # (and they contain cross-references that expect them to be there).
 128 mandir=@mandir@
 129 man1dir=$(mandir)/man1
 130 MAN_PAGES=ctags.1 ebrowse.1 emacs.1 emacsclient.1 etags.1 \
 131           grep-changelog.1 rcs-checkin.1
 132
 133 # Where to install and expect the info files describing Emacs.  In the
 134 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
 135 # since there are now many packages documented with the texinfo
 136 # system, it is inappropriate to imply that it is part of Emacs.
 137 infodir=@infodir@
 138 INFO_FILES=ada-mode auth autotype calc ccmode cl dbus dired-x ebrowse   \
 139            ede ediff edt eieio efaq eintr elisp emacs emacs-mime epa erc \
 140            ert eshell eudc flymake forms gnus idlwave info mairix-el    \
 141            message mh-e newsticker nxml-mode org pcl-cvs pgg rcirc      \
 142            reftex remember sasl sc semantic ses sieve smtpmail speedbar \
 143            tramp url vip viper widget woman
 144
 145 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
 146 HAVE_MAKEINFO=@HAVE_MAKEINFO@
 147
 148 # Directory for local state files for all programs.
 149 localstatedir=@localstatedir@
 150
 151 # Where to look for bitmap files.
 152 bitmapdir=@bitmapdir@
 153
 154 # Where to find the source code.  The source code for Emacs's C kernel is
 155 # expected to be in ${srcdir}/src, and the source code for Emacs's
 156 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 157 # set by the configure script's `--srcdir' option.
 158
 159 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 160 srcdir=@srcdir@
 161
 162 # Where the manpage source files are kept.
 163 mansrcdir=$(srcdir)/doc/man
 164
 165 # Tell make where to find source files; this is needed for the makefiles.
 166 VPATH=@srcdir@
 167
 168 # Where to find the application default.
 169 x_default_search_path=@x_default_search_path@
 170
 171 # Location to install Emacs.app under NeXT/Open/GNUstep / Cocoa
 172 ns_appbindir=@ns_appbindir@
 173 ns_appresdir=@ns_appresdir@
 174
 175 # Where the etc/emacs.desktop file is to be installed.
 176 desktopdir=$(datarootdir)/applications
 177
 178 # Where the etc/images/icons/hicolor directory is to be installed.
 179 icondir=$(datarootdir)/icons
 180
 181 # The source directory for the icon files.
 182 iconsrcdir=$(srcdir)/etc/images/icons
 183
 184 # ==================== Emacs-specific directories ====================
 185
 186 # These variables hold the values Emacs will actually use.  They are
 187 # based on the values of the standard Make variables above.
 188
 189 # Where to install the lisp files distributed with
 190 # Emacs.  This includes the Emacs version, so that the
 191 # lisp files for different versions of Emacs will install
 192 # themselves in separate directories.
 193 lispdir=@lispdir@
 194
 195 # Directories Emacs should search for lisp files specific
 196 # to this site (i.e. customizations), before consulting
 197 # ${lispdir}.  This should be a colon-separated list of
 198 # directories.
 199 locallisppath=@locallisppath@
 200
 201 # Where Emacs will search to find its lisp files.  Before
 202 # changing this, check to see if your purpose wouldn't
 203 # better be served by changing locallisppath.  This
 204 # should be a colon-separated list of directories.
 205 lisppath=@lisppath@
 206
 207 # Where Emacs will search for its lisp files while
 208 # building.  This is only used during the process of
 209 # compiling Emacs, to help Emacs find its lisp files
 210 # before they've been installed in their final location.
 211 # This should be a colon-separated list of directories.
 212 # Normally it points to the lisp/ directory in the sources.
 213 buildlisppath=${srcdir}/lisp
 214
 215 # Where to install the other architecture-independent
 216 # data files distributed with Emacs (like the tutorial,
 217 # the cookie recipes and the Zippy database). This path
 218 # usually contains the Emacs version number, so the data
 219 # files for multiple versions of Emacs may be installed
 220 # at once.
 221 etcdir=@etcdir@
 222
 223 # Where to put executables to be run by Emacs rather than
 224 # the user.  This path usually includes the Emacs version
 225 # and configuration name, so that multiple configurations
 226 # for multiple versions of Emacs may be installed at
 227 # once.
 228 archlibdir=@archlibdir@
 229
 230 # Where to put the docstring file.
 231 docdir=@docdir@
 232
 233 # Where to install Emacs game score files.
 234 gamedir=@gamedir@
 235
 236 # ==================== Utility Programs for the Build ====================
 237
 238 # Allow the user to specify the install program.
 239 INSTALL = @INSTALL@
 240 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 241 INSTALL_DATA = @INSTALL_DATA@
 242 INSTALL_INFO = @INSTALL_INFO@
 243 # By default, we uphold the dignity of our programs.
 244 INSTALL_STRIP =
 245
 246 # We use gzip to compress installed .el files.
 247 GZIP_PROG = @GZIP_PROG@
 248 # If non-nil, gzip the installed Info and man pages.
 249 GZIP_INFO = @GZIP_INFO@
 250
 251 # ============================= Targets ==============================
 252
 253 # Program name transformation.
 254 TRANSFORM = @program_transform_name@
 255
 256 # What emacs should be called when installed.
 257 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
 258 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
 259
 260 # Subdirectories to make recursively.  `lisp' is not included
 261 # because the compiled lisp files are part of the distribution.
 262 # leim is not included because it needs special handling.
 263 #
 264 # Actually, we now include `lisp' as well, since the compiled files
 265 # are not included any more in case of bootstrap or in case Emacs was
 266 # checked out from a VCS.
 267 SUBDIR = lib lib-src src lisp
 268
 269 # The subdir makefiles created by config.status.
 270 SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
 271 SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
 272
 273 # Subdirectories to install, and where they'll go.
 274 # lib-src's makefile knows how to install it, so we don't do that here.
 275 # leim's makefile also knows how to install it, so we don't do that here.
 276 # When installing the info files, we need to do special things to
 277 # avoid nuking an existing dir file, so we don't do that here;
 278 # instead, we have written out explicit code in the `install' targets.
 279 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 280 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
 281
 282 all: ${SUBDIR} leim
 283
 284 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
 285
 286 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 287 # See comments in configure.in for why it is done this way, as opposed
 288 # to just letting configure generate epaths.h from epaths.in in a
 289 # similar way to how Makefile is made from Makefile.in.
 290 epaths-force: FRC
 291         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 292           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 293           x_default_search_path=`echo ${x_default_search_path}`; \
 294           gamedir=`echo ${gamedir}`; \
 295           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 296           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";'      \
 297           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 298           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 299           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 300           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 301           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 302           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 303           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 304           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') &&                \
 305         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 306
 307 # For parallel make, src should be built before leim.
 308 # "export PARALLEL=0" is for SGI's Make, to prevent it from
 309 # running more than 1 process in the leim directory, especially for
 310 # the $TIT files there.
 311 leim:   src Makefile FRC
 312         (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
 313           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 314           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
 315
 316 lib-src src: lib
 317
 318 src:    lib-src FRC
 319
 320 .RECURSIVE: ${SUBDIR} leim
 321
 322 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
 323 lisp: src
 324
 325 # Maintainers can put a copy of gnulib into $(gnulib_srcdir).
 326 gnulib_srcdir = ../gnulib
 327 $(gnulib_srcdir):
 328         git clone git://git.savannah.gnu.org/gnulib.git $@
 329
 330 # A shorter name that satisfies MS-DOS 8+3 constraints.
 331 DOS_gnulib_comp.m4 = gl-comp.m4
 332
 333 # Update modules from gnulib, for maintainers, who should have it in
 334 # $(gnulib_srcdir) (relative to $(srcdir) and should have build tools
 335 # as per $(gnulib_srcdir)/DEPENDENCIES.
 336 GNULIB_MODULES = \
 337   alloca-opt \
 338   careadlinkat crypto/md5 crypto/sha1 crypto/sha256 crypto/sha512 dtoastr \
 339   dup2 \
 340   filemode getloadavg getopt-gnu ignore-value intprops lstat \
 341   mktime pthread_sigmask readlink \
 342   socklen stdarg stdio strftime strtoimax strtoumax symlink sys_stat
 343 GNULIB_TOOL_FLAGS = \
 344  --avoid=msvc-inval --avoid=msvc-nothrow --avoid=pathmax \
 345  --avoid=raise --avoid=threadlib \
 346  --conditional-dependencies --import --no-changelog --no-vc-files \
 347  --makefile-name=gnulib.mk
 348 sync-from-gnulib: $(gnulib_srcdir)
 349         -cd $(srcdir)/m4 && cp $(DOS_gnulib_comp.m4) gnulib-comp.m4
 350         cd $(srcdir) && \
 351           $(gnulib_srcdir)/gnulib-tool $(GNULIB_TOOL_FLAGS) $(GNULIB_MODULES)
 352         cd $(srcdir)/m4 && rm gnulib-cache.m4 warn-on-use.m4
 353         cd $(srcdir)/m4 && mv gnulib-comp.m4 $(DOS_gnulib_comp.m4)
 354         cp $(gnulib_srcdir)/build-aux/texinfo.tex $(srcdir)/doc/misc
 355         cp \
 356           $(gnulib_srcdir)/build-aux/move-if-change \
 357           $(srcdir)/build-aux
 358         cd $(srcdir) && autoreconf -i -I m4
 359 .PHONY: sync-from-gnulib
 360
 361 # These targets should be "${SUBDIR} without `src'".
 362 lib lib-src lisp: Makefile FRC
 363         cd $@; $(MAKE) all $(MFLAGS)                           \
 364           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 365           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 366
 367 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
 368 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
 369 # constructed yet) or the empty string (otherwise).
 370 # src/Makefile.in uses it to implement conditional dependencies, so that
 371 # files that need bootstrap-emacs to be built do not additionally need
 372 # to be kept fresher than bootstrap-emacs.  Otherwise changing a single
 373 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
 374 # all preloaded elisp files, and only then dump the actual src/emacs, which
 375 # is not wrong, but is overkill in 99.99% of the cases.
 376 src: Makefile FRC
 377         boot=bootstrap-emacs$(EXEEXT);                         \
 378         if [ ! -x "src/$$boot" ]; then                                     \
 379             cd $@; $(MAKE) all $(MFLAGS)                                   \
 380               CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}'         \
 381               LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \
 382         fi;
 383         if [ -r .bzr/checkout/dirstate ]; then                  \
 384             vcswitness="`pwd`/.bzr/checkout/dirstate";  \
 385         fi;                                                     \
 386         cd $@; $(MAKE) all $(MFLAGS)                           \
 387           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 388           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="" \
 389           VCSWITNESS="$$vcswitness"
 390
 391 blessmail: Makefile src FRC
 392         cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
 393           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 394
 395 # We used to have one rule per */Makefile.in, but that leads to race
 396 # conditions with parallel makes, so let's assume that the time stamp on
 397 # ./Makefile is representative of the time stamp on all the other Makefiles.
 398 Makefile: config.status $(srcdir)/src/config.in \
 399           $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN)
 400         ./config.status
 401
 402 # Don't erase config.status if make is interrupted while refreshing it.
 403 .PRECIOUS: config.status
 404
 405 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 406         if [ -x ./config.status ]; then \
 407             ./config.status --recheck;  \
 408         else                            \
 409             ./configure $(CONFIGURE_FLAGS); \
 410         fi
 411
 412 AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/aclocal.m4
 413
 414 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 415         cd ${srcdir} && autoconf
 416
 417 ACLOCAL_INPUTS = @MAINT@ $(srcdir)/m4/$(DOS_gnulib_comp.m4)
 418 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
 419         cd $(srcdir) && aclocal -I m4
 420
 421 AUTOMAKE_INPUTS = @MAINT@ $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am $(srcdir)/lib/gnulib.mk
 422 $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
 423         cd $(srcdir) && automake --gnu -a -c lib/Makefile
 424 am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
 425 .PHONY: am--refresh
 426
 427 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 428         @ # Usually, there's no need to rebuild src/config.in just
 429         @ # because stamp-h.in has changed (since building stamp-h.in
 430         @ # refreshes config.in as well), but if config.in is missing
 431         @ # then we really need to do something more.
 432         [ -r "$@" ] || ( cd ${srcdir} && autoheader )
 433 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 434         cd ${srcdir} && autoheader
 435         rm -f $(srcdir)/src/stamp-h.in
 436         echo timestamp > $(srcdir)/src/stamp-h.in
 437
 438 # ==================== Installation ====================
 439
 440 ## If we let lib-src do its own installation, that means we
 441 ## don't have to duplicate the list of utilities to install in
 442 ## this Makefile as well.
 443
 444 ## On AIX, use tar xBf.
 445 ## On Xenix, use tar xpf.
 446
 447 .PHONY: install mkdir
 448
 449 ## We delete each directory in ${COPYDESTS} before we copy into it;
 450 ## that way, we can reinstall over directories that have been put in
 451 ## place with their files read-only (perhaps because they are checked
 452 ## into RCS).  In order to make this safe, we make sure that the
 453 ## source exists and is distinct from the destination.
 454 ### We do install-arch-indep first because
 455 ### the executable needs the Lisp files and DOC file to work properly.
 456 install: all install-arch-indep install-arch-dep install-leim blessmail
 457         @true
 458
 459 MV_DIRS = for i in $$dir; do rm -fr `basename "$$i"` ; mv "$$i" . ; done
 460
 461 ### Install the executables that were compiled specifically for this machine.
 462 ### It would be nice to do something for a parallel make
 463 ### to ensure that install-arch-indep finishes before this starts.
 464 install-arch-dep: mkdir
 465         (cd lib-src; \
 466           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 467             exec_prefix=${exec_prefix} bindir=${bindir} \
 468             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 469             INSTALL_STRIP=${INSTALL_STRIP})
 470         ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
 471         -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
 472         rm -f $(DESTDIR)${bindir}/$(EMACS)
 473         -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
 474         if test "${ns_appresdir}" != ""; then \
 475           ( cd ${ns_appresdir} ; \
 476             if test -d share/emacs ; then dir=share/emacs/*/*; $(MV_DIRS); fi;\
 477             if test -d share/info ; then dir=share/info; $(MV_DIRS) ; fi ; \
 478             rm -fr share ) ; \
 479           ( cd ${ns_appbindir} ; \
 480             if cd libexec ; then dir=emacs/*/*/* ; $(MV_DIRS); \
 481             rm -fr emacs; if cd ../bin; then rm -f emacs emacs-24*; \
 482             ln -sf ../libexec/* . ; fi ; fi ) ; \
 483         else true ; fi
 484
 485 ## FIXME is the emacs-24* bit above really necessary and correct?
 486 ## What if I have 24.1 and 24.2 installed at the same time?
 487 ## In any case, it should use something like echo $version | sed 's/\..*//'
 488 ## instead of hard-coding a version.
 489
 490 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 491 ## Needs to be the user running install, so configure can't set it.
 492 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 493           `id -un 2> /dev/null`; do \
 494           [ -n "$${installuser}" ] && break ; \
 495         done
 496
 497 ### Install the files that are machine-independent.
 498 ### Most of them come straight from the distribution;
 499 ### the exception is the DOC-* files, which are copied
 500 ### from the build directory.
 501
 502 ## Note that we copy DOC* and then delete DOC
 503 ## as a workaround for a bug in tar on Ultrix 4.2.
 504
 505 ## We install only the relevant DOC file if possible
 506 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
 507
 508 ## If people complain about the h flag in tar command, take that out.
 509 ## That flag is also used in leim/Makefile.in
 510
 511 ## Note that the Makefiles in the etc directory are potentially useful
 512 ## in an installed Emacs, so should not be excluded.
 513
 514 install-arch-indep: mkdir info install-etc
 515         -set ${COPYDESTS} ; \
 516         unset CDPATH; \
 517         for dir in ${COPYDIR} ; do \
 518           if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
 519             rm -rf $$1 ; \
 520           fi ; \
 521           shift ; \
 522         done
 523         -set ${COPYDESTS} ; \
 524         mkdir ${COPYDESTS} ; \
 525         chmod ugo+rx ${COPYDESTS} ; \
 526         unset CDPATH; \
 527         $(set_installuser); \
 528         for dir in ${COPYDIR} ; do \
 529           dest=$$1 ; shift ; \
 530           [ -d $${dir} ] \
 531           && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
 532           && (echo "Copying $${dir} to $${dest}..." ; \
 533               (cd $${dir}; tar -chf - . ) \
 534                 | (cd $${dest}; umask 022; \
 535                    tar -xvf - && cat > /dev/null) || exit 1; \
 536               find $${dest} -exec chown $${installuser} {} ';' ;\
 537               for subdir in `find $${dest} -type d -print` ; do \
 538                 chmod a+rx $${subdir} ; \
 539                 rm -f  $${subdir}/.gitignore ; \
 540                 rm -f  $${subdir}/.arch-inventory ; \
 541                 rm -f  $${subdir}/.DS_Store ; \
 542                 rm -f  $${subdir}/\#* ; \
 543                 rm -f  $${subdir}/.\#* ; \
 544                 rm -f  $${subdir}/*~ ; \
 545                 rm -f  $${subdir}/*.orig ; \
 546                 [ "$${dir}" != "${srcdir}/etc" ] && \
 547                  rm -f $${subdir}/[mM]akefile*.c $${subdir}/[mM]akefile*[.-]in \
 548                    $${subdir}/[mM]akefile ; \
 549                 rm -f  $${subdir}/ChangeLog* ; \
 550               done) ; \
 551         done
 552         -rm -f $(DESTDIR)${lispdir}/subdirs.el
 553         $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
 554         if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
 555         then true; \
 556         else \
 557           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 558            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 559             > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
 560         fi
 561         chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
 562         -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
 563         then true; \
 564         else \
 565           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 566            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 567             > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
 568         fi
 569         -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
 570         -unset CDPATH; \
 571         if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
 572         then \
 573            fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
 574            if [ -f "./etc/DOC-$${fullversion}" ]; \
 575            then \
 576              docfile="DOC-$${fullversion}"; \
 577            else \
 578              docfile="DOC"; \
 579            fi; \
 580            echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
 581            (cd ./etc; tar -chf - $${docfile}) \
 582              |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 583            (cd $(DESTDIR)$(docdir); \
 584             $(set_installuser); \
 585             chown $${installuser} DOC*; chmod a+r DOC*; \
 586             if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
 587         else true; fi
 588         -unset CDPATH; \
 589         if [ -r ./lisp ] \
 590            && [ -r ./lisp/simple.el ] \
 591            && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \
 592            && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
 593         then \
 594            echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \
 595            (cd lisp; tar -chf - *.el *.elc) \
 596              |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 597            (cd $(DESTDIR)${lispdir}; \
 598             $(set_installuser); \
 599             find . -exec chown $${installuser} {} ';') ; \
 600         else true; fi
 601         -unset CDPATH; \
 602         if [ -n "${GZIP_PROG}" ]; \
 603         then \
 604            echo "Compressing *.el ..." ; \
 605            (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
 606                 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
 607             done) \
 608         else true; fi
 609         -unset CDPATH; \
 610         thisdir=`/bin/pwd`; \
 611         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 612         then \
 613           (cd $(DESTDIR)${infodir};  \
 614            if [ -f dir ]; then true; \
 615            else \
 616              (cd $${thisdir}; \
 617               ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
 618               chmod a+r $(DESTDIR)${infodir}/dir); \
 619            fi; \
 620            cd ${srcdir}/info ; \
 621            for elt in $(INFO_FILES); do \
 622               test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
 623               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 624                 ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \
 625                 chmod a+r $(DESTDIR)${infodir}/$$f; \
 626                 if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 627                   rm -f $(DESTDIR)${infodir}/$$f.gz; \
 628                   ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
 629                 else true; fi; \
 630               done; \
 631            done); \
 632         else true; fi
 633         -unset CDPATH; \
 634         thisdir=`/bin/pwd`; \
 635         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 636         then \
 637           for elt in $(INFO_FILES); do \
 638             test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
 639             (cd $${thisdir}; \
 640              ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 641           done; \
 642         else true; fi
 643         -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
 644         thisdir=`/bin/pwd`; \
 645         cd ${mansrcdir}; \
 646         for page in ${MAN_PAGES}; do \
 647           (cd $${thisdir}; \
 648            ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}; \
 649            chmod a+r $(DESTDIR)${man1dir}/$${page}; \
 650            if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 651              rm -f $(DESTDIR)${man1dir}/$${page}.gz; \
 652              ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \
 653            else true; fi ); \
 654         done
 655
 656 ## Install those items from etc/ that need to end up elsewhere.
 657 install-etc: mkdir
 658         ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
 659           $(DESTDIR)${desktopdir}/emacs.desktop
 660         for icon in $(iconsrcdir)/*/*/apps/*.* \
 661           $(iconsrcdir)/*/*/mimetypes/*.*; do \
 662           if [ -r $${icon} ]; then \
 663             iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
 664             ${INSTALL_DATA} $${icon} $${iicon} ; \
 665           fi ; \
 666         done
 667
 668 ### Install LEIM files.  Although they are machine-independent, we
 669 ### have separate target here instead of including it in
 670 ### `install-arch-indep'.  People who extracted LEIM files after they
 671 ### installed Emacs itself can install only LEIM files by this target.
 672 install-leim: leim/Makefile mkdir
 673         cd leim; $(MAKE) install
 674
 675 ### Build Emacs and install it, stripping binaries while installing them.
 676 install-strip:
 677         $(MAKE) INSTALL_STRIP=-s install
 678
 679 ### Build all the directories we're going to install Emacs in.  Since
 680 ### we may be creating several layers of directories (for example,
 681 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use install-sh -d
 682 ### instead of mkdir.  Not all systems' mkdir programs have the `-p' flag.
 683 ### We set the umask so that any created directories are world-readable.
 684 ### FIXME it would be good to warn about non-standard permissions of
 685 ### pre-existing directories, but that does not seem easy.
 686 mkdir: FRC
 687         icondirs= ; \
 688         for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \
 689           if [ -d $${dir} ]; then \
 690             icondirs="$${icondirs} $${dir}" ; \
 691           fi ; \
 692         done ; \
 693         icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
 694         umask 022 ; \
 695         $(srcdir)/build-aux/install-sh -d $(DESTDIR)${datadir} ${COPYDESTS} \
 696           $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
 697           $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
 698           $(DESTDIR)${datadir}/emacs/site-lisp \
 699           $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
 700           $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
 701           $(DESTDIR)${desktopdir} $${icondirs}
 702
 703 ### Delete all the installed files that the `install' target would
 704 ### create (but not the noninstalled files such as `make all' would create).
 705 ###
 706 ### Don't delete the lisp and etc directories if they're in the source tree.
 707 uninstall:
 708         (cd lib-src;                                    \
 709          $(MAKE) $(MFLAGS) uninstall                    \
 710             prefix=${prefix} exec_prefix=${exec_prefix} \
 711             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
 712         -unset CDPATH; \
 713         for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do        \
 714           if [ -d $${dir} ]; then                       \
 715             case `(cd $${dir} ; /bin/pwd)` in           \
 716               `(cd ${srcdir} ; /bin/pwd)`* ) ;;         \
 717               * ) rm -rf $${dir} ;;                     \
 718             esac ;                                      \
 719             case $${dir} in                             \
 720               $(DESTDIR)${datadir}/emacs/${version}/* )         \
 721                 rm -rf $(DESTDIR)${datadir}/emacs/${version}    \
 722               ;;                                        \
 723             esac ;                                      \
 724           fi ;                                          \
 725         done
 726         -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
 727         (cd $(DESTDIR)${infodir} && \
 728           for elt in $(INFO_FILES); do \
 729             $(INSTALL_INFO) --remove --info-dir=. $$elt; \
 730             for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 731               rm -f $$f; \
 732             done; \
 733           done;)
 734         (cd $(DESTDIR)${man1dir}  && rm -f $(MAN_PAGES))
 735         (cd $(DESTDIR)${bindir}  && rm -f $(EMACSFULL) $(EMACS))
 736         (cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg )
 737         -rm -f $(DESTDIR)${desktopdir}/emacs.desktop
 738         for file in snake-scores tetris-scores; do \
 739           file=$(DESTDIR)${gamedir}/$${file}; \
 740           [ -s $${file} ] || rm -f $$file; \
 741         done
 742
 743 FRC:
 744
 745 # ==================== Cleaning up and miscellanea ====================
 746
 747 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
 748
 749 ### `mostlyclean'
 750 ###      Like `clean', but may refrain from deleting a few files that people
 751 ###      normally don't want to recompile.  For example, the `mostlyclean'
 752 ###      target for GCC does not delete `libgcc.a', because recompiling it
 753 ###      is rarely necessary and takes a lot of time.
 754 mostlyclean: FRC
 755         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 756         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 757         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 758         (cd lib;      $(MAKE) $(MFLAGS) mostlyclean)
 759         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 760         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) mostlyclean)
 761         -(cd doc/misc &&   $(MAKE) $(MFLAGS) mostlyclean)
 762         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) mostlyclean)
 763         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)
 764         (cd leim;     $(MAKE) $(MFLAGS) mostlyclean)
 765
 766 ### `clean'
 767 ###      Delete all files from the current directory that are normally
 768 ###      created by building the program.  Don't delete the files that
 769 ###      record the configuration.  Also preserve files that could be made
 770 ###      by building, but normally aren't because the distribution comes
 771 ###      with them.
 772 ###
 773 ###      Delete `.dvi' files here if they are not part of the distribution.
 774 clean: FRC
 775         (cd src;      $(MAKE) $(MFLAGS) clean)
 776         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 777         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 778         (cd lib;      $(MAKE) $(MFLAGS) clean)
 779         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 780         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 781         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 782         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 783         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 784         (cd leim;     $(MAKE) $(MFLAGS) clean)
 785
 786 ### `bootclean'
 787 ###      Delete all files that need to be remade for a clean bootstrap.
 788 top_bootclean=\
 789         rm -f config.cache config.log
 790 ### `distclean'
 791 ###      Delete all files from the current directory that are created by
 792 ###      configuring or building the program.  If you have unpacked the
 793 ###      source and built the program without creating any other files,
 794 ###      `make distclean' should leave only the files that were in the
 795 ###      distribution.
 796 top_distclean=\
 797         ${top_bootclean}; \
 798         rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
 799 distclean: FRC
 800         (cd src;      $(MAKE) $(MFLAGS) distclean)
 801         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 802         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 803         (cd lib;      $(MAKE) $(MFLAGS) distclean)
 804         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 805         (cd doc/emacs &&    $(MAKE) $(MFLAGS) distclean)
 806         (cd doc/misc &&    $(MAKE) $(MFLAGS) distclean)
 807         (cd doc/lispref &&    $(MAKE) $(MFLAGS) distclean)
 808         (cd doc/lispintro &&    $(MAKE) $(MFLAGS) distclean)
 809         (cd leim;     $(MAKE) $(MFLAGS) distclean)
 810         (cd lisp;     $(MAKE) $(MFLAGS) distclean)
 811         ${top_distclean}
 812
 813 ### `bootstrap-clean'
 814 ###      Delete everything that can be reconstructed by `make' and that
 815 ###      needs to be deleted in order to force a bootstrap from a clean state.
 816 bootstrap-clean: FRC
 817         (cd src;      $(MAKE) $(MFLAGS) bootstrap-clean)
 818         (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
 819         (cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)
 820         (cd lib;      $(MAKE) $(MFLAGS) maintainer-clean)
 821         (cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)
 822         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) maintainer-clean)
 823         -(cd doc/misc &&   $(MAKE) $(MFLAGS) maintainer-clean)
 824         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)
 825         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)
 826         (cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)
 827         (cd lisp;     $(MAKE) $(MFLAGS) bootstrap-clean)
 828         [ ! -f config.log ] || mv -f config.log config.log~
 829         ${top_bootclean}
 830 ## configure; make bootstrap replaces the real config.log from configure
 831 ## with the truncated one from config.status.  The former is more useful.
 832
 833 ### `maintainer-clean'
 834 ###      Delete everything from the current directory that can be
 835 ###      reconstructed with this Makefile.  This typically includes
 836 ###      everything deleted by distclean, plus more: C source files
 837 ###      produced by Bison, tags tables, info files, and so on.
 838 ###
 839 ###      One exception, however: `make maintainer-clean' should not delete
 840 ###      `configure' even if `configure' can be remade using a rule in the
 841 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 842 ###      anything that needs to exist in order to run `configure' and then
 843 ###      begin to build the program.
 844 top_maintainer_clean=\
 845         ${top_distclean}; \
 846         rm -fr autom4te.cache
 847 maintainer-clean: bootstrap-clean FRC
 848         (cd src;      $(MAKE) $(MFLAGS) maintainer-clean)
 849         (cd lisp;     $(MAKE) $(MFLAGS) maintainer-clean)
 850         ${top_maintainer_clean}
 851
 852 ### This doesn't actually appear in the coding standards, but Karl
 853 ### says GCC supports it, and that's where the configuration part of
 854 ### the coding standards seem to come from.  It's like distclean, but
 855 ### it deletes backup and autosave files too.
 856 extraclean:
 857         for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 858         ${top_maintainer_clean}
 859         -rm -f config-tmp-*
 860         -rm -f *~ \#*
 861
 862 # The src subdir knows how to do the right thing
 863 # even when the build directory and source dir are different.
 864 TAGS tags: lib lib-src src
 865         cd src; $(MAKE) $(MFLAGS) tags
 866
 867 check:
 868         @if test ! -d test/automated; then \
 869           echo "You do not seem to have the test/ directory."; \
 870           echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
 871         else \
 872           cd test/automated && $(MAKE) $(MFLAGS) check; \
 873         fi
 874
 875 dist:
 876         cd ${srcdir}; ./make-dist
 877
 878 .PHONY: info dvi dist check html
 879
 880 info-real:
 881         (cd doc/emacs; $(MAKE) $(MFLAGS) info)
 882         (cd doc/misc; $(MAKE) $(MFLAGS) info)
 883         (cd doc/lispref; $(MAKE) $(MFLAGS) info)
 884         (cd doc/lispintro; $(MAKE) $(MFLAGS) info)
 885
 886 force-info:
 887 # Note that man/Makefile knows how to put the info files in $(srcdir),
 888 # so we can do ok running make in the build dir.
 889 # This used to have a clause that exited with an error if MAKEINFO = no.
 890 # But it is inappropriate to do so without checking if makeinfo is
 891 # actually needed - it is not if the info files are up-to-date.  (Bug#3982)
 892 # Only the doc/*/Makefiles can decide that, so we let those rules run
 893 # and give a standard error if makeinfo is needed but missing.
 894 # While it would be nice to give a more detailed error message, that
 895 # would require changing every rule in doc/ that builds an info file,
 896 # and it's not worth it.  This case is only relevant if you download a
 897 # release, then change the .texi files.
 898 info: force-info
 899         @if test "$(HAVE_MAKEINFO)" = "no"; then \
 900           echo "Configured --without-makeinfo, not building manuals" ; \
 901         else \
 902           $(MAKE) $(MFLAGS) info-real ; \
 903         fi
 904
 905 # The info/dir file must be updated by hand when new manuals are added.
 906 check-info-dir: info
 907         cd info ; \
 908         missing= ; \
 909         for file in *; do \
 910           test -f "$${file}" || continue ; \
 911           case $${file} in \
 912             *-[0-9]*|COPYING|dir) continue ;; \
 913           esac ; \
 914           grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
 915         done ; \
 916         if test -n "$${missing}"; then \
 917           echo "Missing info/dir entries: $${missing}" ; \
 918           exit 1 ; \
 919         fi ; \
 920         echo "info/dir is OK"
 921
 922 dvi:
 923         (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
 924         (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
 925         (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
 926         (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
 927
 928 #### Bootstrapping.
 929
 930 ### This first cleans the lisp subdirectory, removing all compiled
 931 ### Lisp files.  Then re-run make to build all the files anew.
 932
 933 .PHONY: bootstrap
 934
 935 ## configure; make bootstrap replaces the real config.log from configure
 936 ## with the truncated one from config.status.  The former is more useful.
 937 bootstrap: bootstrap-clean FRC
 938         if [ -x ./config.status ]; then           \
 939             ./config.status;                      \
 940         else                                      \
 941             ./configure $(CONFIGURE_FLAGS);       \
 942         fi
 943         $(MAKE) $(MFLAGS) info all
 944
 945 .PHONY: check-declare
 946
 947 check-declare:
 948         @if [ ! -f $(srcdir)/src/emacs ]; then \
 949           echo "You must build Emacs to use this command"; \
 950           exit 1; \
 951         fi
 952         (cd leim; $(MAKE) $(MFLAGS) $@)
 953         (cd lisp; $(MAKE) $(MFLAGS) $@)