| blob | 8af3756222bf188ff30a58e981985f8275d28952 |
1 @echo off\r
2 rem ----------------------------------------------------------------------\r
3 rem Configuration script for MSDOS\r
4 rem Copyright (C) 1994-1999, 2001-2014 Free Software Foundation, Inc.\r
5 \r
6 rem This file is part of GNU Emacs.\r
7 \r
8 rem GNU Emacs is free software: you can redistribute it and/or modify\r
9 rem it under the terms of the GNU General Public License as published by\r
10 rem the Free Software Foundation, either version 3 of the License, or\r
11 rem (at your option) any later version.\r
12 \r
13 rem GNU Emacs is distributed in the hope that it will be useful,\r
14 rem but WITHOUT ANY WARRANTY; without even the implied warranty of\r
15 rem MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
16 rem GNU General Public License for more details.\r
17 \r
18 rem You should have received a copy of the GNU General Public License\r
19 rem along with GNU Emacs. If not, see http://www.gnu.org/licenses/.\r
20 \r
21 rem ----------------------------------------------------------------------\r
22 rem YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:\r
23 rem\r
24 rem + msdos version 3 or better.\r
25 rem + DJGPP version 2.0 or later (version 2.03 or later recommended).\r
26 rem + make utility that allows breaking of the 128 chars limit on\r
27 rem command lines. ndmake (as of version 4.5) won't work due to a\r
28 rem line length limit. The make that comes with DJGPP does work (and is\r
29 rem recommended).\r
30 rem + rm, mv, and cp (from GNU file utilities).\r
31 rem + sed (you can use the port that comes with DJGPP).\r
32 rem\r
33 rem You should be able to get all the above utilities from the DJGPP FTP\r
34 rem site, ftp.delorie.com, in the directory "pub/djgpp/current/v2gnu".\r
35 rem ----------------------------------------------------------------------\r
36 set X11=\r
37 set nodebug=\r
38 set djgpp_ver=\r
39 set sys_malloc=\r
40 set libxml=\r
41 if "%1" == "" goto usage\r
42 rem ----------------------------------------------------------------------\r
43 rem See if their environment is large enough. We need 28 bytes.\r
44 set $foo$=789012345678901234567\r
45 if not "%$foo$%" == "789012345678901234567" goto SmallEnv\r
46 set $foo$=\r
47 :again\r
48 if "%1" == "" goto usage\r
49 if "%1" == "--with-x" goto withx\r
50 if "%1" == "--no-debug" goto nodebug\r
51 if "%1" == "msdos" goto msdos\r
52 if "%1" == "--with-system-malloc" goto sysmalloc\r
53 :usage\r
54 echo Usage: config [--no-debug] [--with-system-malloc] [--with-x] msdos\r
55 echo [Read the script before you run it.]\r
56 goto end\r
57 rem ----------------------------------------------------------------------\r
58 :withx\r
59 set X11=Y\r
60 shift\r
61 goto again\r
62 rem ----------------------------------------------------------------------\r
63 :nodebug\r
64 set nodebug=Y\r
65 shift\r
66 goto again\r
67 rem ----------------------------------------------------------------------\r
68 :sysmalloc\r
69 set sys_malloc=Y\r
70 shift\r
71 goto again\r
72 rem ----------------------------------------------------------------------\r
73 :msdos\r
74 Echo Checking whether 'sed' is available...\r
75 sed -e "w junk.$$$" <Nul\r
76 If Exist junk.$$$ Goto sedOk\r
77 Echo To configure 'Emacs' you need to have 'sed'!\r
78 Goto End\r
79 :sedOk\r
80 Echo Checking whether 'rm' is available...\r
81 rm -f junk.$$$\r
82 If Not Exist junk.$$$ Goto rmOk\r
83 Echo To configure 'Emacs' you need to have 'rm'!\r
84 Goto End\r
85 :rmOk\r
86 Echo Checking whether 'mv' is available...\r
87 rm -f junk.1 junk.2\r
88 echo foo >junk.1\r
89 mv junk.1 ./junk.2\r
90 If Exist junk.2 Goto mvOk\r
91 Echo To configure 'Emacs' you need to have 'mv'!\r
92 rm -f junk.1\r
93 Goto End\r
94 :mvOk\r
95 rm -f junk.2\r
96 Echo Checking whether 'gcc' is available...\r
97 echo main(){} >junk.c\r
98 gcc -c junk.c\r
99 if exist junk.o goto gccOk\r
100 Echo To configure 'Emacs' you need to have 'gcc'!\r
101 rm -f junk.c\r
102 Goto End\r
103 :gccOk\r
104 rm -f junk.c junk.o junk junk.exe\r
105 Echo Checking what version of DJGPP is installed...\r
106 If Not "%DJGPP%" == "" goto djgppOk\r
107 Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r
108 Goto End\r
109 :djgppOk\r
110 echo int main() >junk.c\r
111 echo #ifdef __DJGPP__ >>junk.c\r
112 echo {return (__DJGPP__)*10;} >>junk.c\r
113 echo #else >>junk.c\r
114 echo #ifdef __GO32__ >>junk.c\r
115 echo {return 10;} >>junk.c\r
116 echo #else >>junk.c\r
117 echo {return 0;} >>junk.c\r
118 echo #endif >>junk.c\r
119 echo #endif >>junk.c\r
120 gcc -o junk junk.c\r
121 if not exist junk.exe coff2exe junk\r
122 junk\r
123 If ErrorLevel 10 Goto go32Ok\r
124 rm -f junk.c junk junk.exe\r
125 Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r
126 Goto End\r
127 :go32Ok\r
128 set djgpp_ver=2\r
129 If Not ErrorLevel 20 Echo To build 'Emacs' you need DJGPP v2.0 or later!\r
130 If Not ErrorLevel 20 Goto End\r
131 rm -f junk.c junk junk.exe\r
132 rem DJECHO is used by the top-level Makefile in the v2.x build\r
133 Echo Checking whether 'djecho' is available...\r
134 redir -o Nul -eo djecho -o junk.$$$ foo\r
135 If Exist junk.$$$ Goto djechoOk\r
136 Echo To build 'Emacs' you need the 'djecho.exe' program!\r
137 Echo 'djecho.exe' is part of 'djdevNNN.zip' basic DJGPP development kit.\r
138 Echo Versions of DJGPP before 2.02 called this program 'echo.exe'.\r
139 Echo Either unpack 'djecho.exe' from the 'djdevNNN.zip' archive,\r
140 Echo or, if you have 'echo.exe', copy it to 'djecho.exe'.\r
141 Echo Then run CONFIG.BAT again with the same arguments you did now.\r
142 Goto End\r
143 :djechoOk\r
144 rm -f junk.$$$\r
145 Echo Configuring for DJGPP Version %DJGPP_VER% ...\r
146 Rem ----------------------------------------------------------------------\r
147 Echo Configuring the source directory...\r
148 cd src\r
149 \r
150 rem Create "epaths.h"\r
151 sed -f ../msdos/sed4.inp <epaths.in >epaths.tmp\r
152 update epaths.tmp epaths.h >nul\r
153 rm -f epaths.tmp\r
154 \r
155 rem Create "config.h"\r
156 rm -f config.h2 config.tmp\r
157 if exist config.in sed -e '' config.in > config.tmp\r
158 if exist ..\msdos\autogen\config.in sed -e '' ../msdos/autogen/config.in > config.tmp\r
159 if "%X11%" == "" goto src4\r
160 if exist config.in sed -f ../msdos/sed2x.inp < config.in > config.tmp\r
161 if exist ..\msdos\autogen\config.in sed -f ../msdos/sed2x.inp < ..\msdos\autogen\config.in > config.tmp\r
162 :src4\r
163 sed -f ../msdos/sed2v2.inp <config.tmp >config.h2\r
164 Rem See if they have libxml2 later than v2.2.0 installed\r
165 Echo Checking whether libxml2 v2.2.1 or later is installed ...\r
166 rm -f junk.c junk.o junk junk.exe\r
167 rem Use djecho here because we need to quote brackets\r
168 djecho "#include <libxml/xmlversion.h>" >junk.c\r
169 djecho "int main()" >>junk.c\r
170 djecho "{return (LIBXML_VERSION > 20200 ? 0 : 1);}" >>junk.c\r
171 redir -o Nul -eo gcc -I/dev/env/DJDIR/include/libxml2 -o junk junk.c\r
172 if not exist junk Goto xmlDone\r
173 if not exist junk.exe coff2exe junk\r
174 junk\r
175 If ErrorLevel 1 Goto xmlDone\r
176 Echo Configuring with libxml2 ...\r
177 sed -e "/#undef HAVE_LIBXML2/s/^.*$/#define HAVE_LIBXML2 1/" <config.h2 >config.h3\r
178 mv config.h3 config.h2\r
179 set libxml=1\r
180 :xmlDone\r
181 rm -f junk.c junk junk.exe\r
182 Rem See if they requested a SYSTEM_MALLOC build\r
183 if "%sys_malloc%" == "" Goto cfgDone\r
184 rm -f config.tmp\r
185 ren config.h2 config.tmp\r
186 sed -f ../msdos/sedalloc.inp <config.tmp >config.h2\r
187 \r
188 :cfgDone\r
189 rm -f junk.c junk junk.exe\r
190 update config.h2 config.h >nul\r
191 rm -f config.tmp config.h2\r
192 \r
193 rem On my system dir.h gets in the way. It's a VMS file so who cares.\r
194 if exist dir.h ren dir.h vmsdir.h\r
195 \r
196 rem Create "makefile" from "makefile.in".\r
197 rm -f Makefile makefile.tmp\r
198 copy Makefile.in+lisp.mk+deps.mk makefile.tmp\r
199 sed -f ../msdos/sed1v2.inp <makefile.tmp >Makefile\r
200 rm -f makefile.tmp\r
201 \r
202 if "%X11%" == "" goto src5\r
203 mv Makefile makefile.tmp\r
204 sed -f ../msdos/sed1x.inp <makefile.tmp >Makefile\r
205 rm -f makefile.tmp\r
206 :src5\r
207 \r
208 if "%sys_malloc%" == "" goto src5a\r
209 sed -e "/^GMALLOC_OBJ *=/s/gmalloc.o//" <Makefile >makefile.tmp\r
210 sed -e "/^VMLIMIT_OBJ *=/s/vm-limit.o//" <makefile.tmp >makefile.tmp2\r
211 sed -e "/^RALLOC_OBJ *=/s/ralloc.o//" <makefile.tmp2 >Makefile\r
212 rm -f makefile.tmp makefile.tmp2\r
213 :src5a\r
214 \r
215 if "%nodebug%" == "" goto src6\r
216 sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
217 sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile\r
218 rm -f makefile.tmp\r
219 :src6\r
220 \r
221 if "%libxml%" == "" goto src7\r
222 sed -e "/^LIBXML2_LIBS *=/s/=/= -lxml2 -lz -liconv/" <Makefile >makefile.tmp\r
223 sed -e "/^LIBXML2_CFLAGS *=/s|=|= -I/dev/env/DJDIR/include/libxml2|" <makefile.tmp >Makefile\r
224 rm -f makefile.tmp\r
225 :src7\r
226 cd ..\r
227 rem ----------------------------------------------------------------------\r
228 Echo Configuring the library source directory...\r
229 cd lib-src\r
230 sed -f ../msdos/sed3v2.inp <Makefile.in >Makefile\r
231 if "%X11%" == "" goto libsrc2a\r
232 mv Makefile makefile.tmp\r
233 sed -f ../msdos/sed3x.inp <makefile.tmp >Makefile\r
234 rm -f makefile.tmp\r
235 :libsrc2a\r
236 if "%nodebug%" == "" goto libsrc3\r
237 sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
238 sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile\r
239 rm -f makefile.tmp\r
240 :libsrc3\r
241 cd ..\r
242 rem ----------------------------------------------------------------------\r
243 if "%X11%" == "" goto oldx1\r
244 Echo Configuring the oldxmenu directory...\r
245 cd oldxmenu\r
246 sed -f ../msdos/sed5x.inp <Makefile.in >Makefile\r
247 if "%nodebug%" == "" goto oldx2\r
248 sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
249 mv -f makefile.tmp Makefile\r
250 :oldx2\r
251 cd ..\r
252 :oldx1\r
253 rem ----------------------------------------------------------------------\r
254 Echo Configuring the doc directory, expect one "File not found" message...\r
255 cd doc\r
256 Rem The two variants for lispintro below is for when the shell\r
257 Rem supports long file names but DJGPP does not\r
258 for %%d in (emacs lispref lispintro lispintr misc) do sed -f ../msdos/sed6.inp < %%d\Makefile.in > %%d\Makefile\r
259 cd ..\r
260 rem ----------------------------------------------------------------------\r
261 Echo Configuring the lib directory...\r
262 If Exist build-aux\snippet\c++defs.h update build-aux/snippet/c++defs.h build-aux/snippet/cxxdefs.h\r
263 cd lib\r
264 Rem Rename files like djtar on plain DOS filesystem would.\r
265 If Exist build-aux\snippet\c++defs.h update build-aux/snippet/c++defs.h build-aux/snippet/cxxdefs.h\r
266 If Exist alloca.in.h update alloca.in.h alloca.in-h\r
267 If Exist execinfo.in.h update execinfo.in.h execinfo.in-h\r
268 If Exist getopt.in.h update getopt.in.h getopt.in-h\r
269 If Exist stdalign.in.h update stdalign.in.h stdalign.in-h\r
270 If Exist stdbool.in.h update stdbool.in.h stdbool.in-h\r
271 If Exist signal.in.h update signal.in.h signal.in-h\r
272 If Exist stdalign.in.h update stdalign.in.h stdalign.in-h\r
273 If Exist stddef.in.h update stddef.in.h stddef.in-h\r
274 If Exist stdint.in.h update stdint.in.h stdint.in-h\r
275 If Exist stdio.in.h update stdio.in.h stdio.in-h\r
276 If Exist stdlib.in.h update stdlib.in.h stdlib.in-h\r
277 If Exist sys_stat.in.h update sys_stat.in.h sys_stat.in-h\r
278 If Exist sys_types.in.h update sys_types.in.h sys_types.in-h\r
279 If Exist time.in.h update time.in.h time.in-h\r
280 If Exist unistd.in.h update unistd.in.h unistd.in-h\r
281 If Exist Makefile.in sed -f ../msdos/sedlibcf.inp < Makefile.in > makefile.tmp\r
282 If Exist ..\msdos\autogen\Makefile.in sed -f ../msdos/sedlibcf.inp < ..\msdos\autogen\Makefile.in > makefile.tmp\r
283 sed -f ../msdos/sedlibmk.inp < makefile.tmp > Makefile\r
284 rm -f makefile.tmp\r
285 Rem Create .Po files for new files in lib/\r
286 If Not Exist deps\stamp mkdir deps\r
287 for %%f in (*.c) do @call ..\msdos\depfiles.bat %%f\r
288 echo deps-stamp > deps\stamp\r
289 cd ..\r
290 rem ----------------------------------------------------------------------\r
291 Echo Configuring the lisp directory...\r
292 cd lisp\r
293 If Exist gnus\.dir-locals.el update gnus/.dir-locals.el gnus/_dir-locals.el\r
294 sed -f ../msdos/sedlisp.inp < Makefile.in > Makefile\r
295 cd ..\r
296 rem ----------------------------------------------------------------------\r
297 If not Exist leim\quail\latin-pre.el goto maindir\r
298 Echo Configuring the leim directory...\r
299 cd leim\r
300 sed -f ../msdos/sedleim.inp < Makefile.in > Makefile\r
301 cd ..\r
302 rem ----------------------------------------------------------------------\r
303 :maindir\r
304 Echo Configuring the main directory...\r
305 If Exist .dir-locals.el update .dir-locals.el _dir-locals.el\r
306 If Exist src\.dbxinit update src/.dbxinit src/_dbxinit\r
307 Echo Looking for the GDB init file...\r
308 If Exist src\.gdbinit update src/.gdbinit src/_gdbinit\r
309 If Exist src\_gdbinit goto gdbinitOk\r
310 Echo ERROR:\r
311 Echo I cannot find the GDB init file. It was called ".gdbinit" in\r
312 Echo the Emacs distribution, but was probably renamed to some other\r
313 Echo name without the leading dot when you untarred the archive.\r
314 Echo It should be in the "src/" subdirectory. Please make sure this\r
315 Echo file exists and is called "_gdbinit" with a leading underscore.\r
316 Echo Then run CONFIG.BAT again with the same arguments you did now.\r
317 goto End\r
318 :gdbinitOk\r
319 Echo Looking for the GDB init file...found\r
320 rem GNUMakefile is not appropriate for MS-DOS so move it out of the way\r
321 If Exist GNUmakefile mv -f GNUmakefile GNUmakefile.unix\r
322 copy msdos\mainmake.v2 Makefile >nul\r
323 rem ----------------------------------------------------------------------\r
324 goto End\r
325 :SmallEnv\r
326 echo Your environment size is too small. Please enlarge it and run me again.\r
327 echo For example, type "command.com /e:2048" to have 2048 bytes available.\r
328 set $foo$=\r
329 :end\r
330 set X11=\r
331 set nodebug=\r
332 set djgpp_ver=\r
333 set sys_malloc=\r
334 set libxml=\r