src/m/intel386.h

   1 /* Machine description file for intel 386.
   2    Copyright (C) 1987 Free Software Foundation, Inc.
   3
   4 This file is part of GNU Emacs.
   5
   6 GNU Emacs is free software; you can redistribute it and/or modify
   7 it under the terms of the GNU General Public License as published by
   8 the Free Software Foundation; either version 2, or (at your option)
   9 any later version.
  10
  11 GNU Emacs is distributed in the hope that it will be useful,
  12 but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 GNU General Public License for more details.
  15
  16 You should have received a copy of the GNU General Public License
  17 along with GNU Emacs; see the file COPYING.  If not, write to
  18 the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
  19 Boston, MA 02111-1307, USA.  */
  20
  21
  22 /* The following line tells the configuration script what sort of
  23    operating system this machine is likely to run.
  24    USUAL-OPSYS="note"
  25
  26 NOTE-START
  27 Intel 386 (-machine=intel386 or -machine=is386.h)
  28
  29   The possibilities for -opsystem are: bsd4-2, usg5-2-2, usg5-3,
  30   isc2-2, 386-ix, esix, linux, sco3.2v4, and xenix.
  31
  32   18.58 should support a wide variety of operating systems.
  33   Use isc2-2 for Interactive 386/ix version 2.2.
  34   Use 386ix for prior versions.
  35   Use esix for Esix.
  36   Use linux for Linux.
  37   It isn't clear what to do on an SCO system.
  38
  39   -machine=is386 is used for an Integrated Solutions 386 machine.
  40   It may also be correct for Microport systems.
  41
  42 Cubix QBx/386 (-machine=intel386 -opsystem=usg5-3)
  43
  44   Changes merged in 19.1.  Systems before 2/A/0 may fail to compile etags.c
  45   due to a compiler bug.
  46
  47 Prime EXL (-machine=intel386 -opsystem=usg5-3)
  48
  49   Minor changes merged in 19.1.
  50 NOTE-END */
  51
  52 /* Define WORDS_BIG_ENDIAN iff lowest-numbered byte in a word
  53    is the most significant byte.  */
  54
  55 #undef WORDS_BIG_ENDIAN
  56
  57 /* Define NO_ARG_ARRAY if you cannot take the address of the first of a
  58  * group of arguments and treat it as an array of the arguments.  */
  59
  60 /* #define NO_ARG_ARRAY */
  61
  62 /* Define WORD_MACHINE if addresses and such have
  63  * to be corrected before they can be used as byte counts.  */
  64
  65 /* #define WORD_MACHINE */
  66
  67 /* Now define a symbol for the cpu type, if your compiler
  68    does not define it automatically:
  69    Ones defined so far include vax, m68000, ns16000, pyramid,
  70    orion, tahoe, APOLLO and many others */
  71
  72 #define INTEL386
  73
  74 /* Use type int rather than a union, to represent Lisp_Object */
  75
  76 #define NO_UNION_TYPE
  77
  78 /* crt0.c, if it is used, should use the i386-bsd style of entry.
  79    with no extra dummy args.  On USG and XENIX,
  80    NO_REMAP says this isn't used. */
  81
  82 #define CRT0_DUMMIES bogus_fp,
  83
  84 /* crt0.c should define a symbol `start' and do .globl with a dot.  */
  85
  86 #define DOT_GLOBAL_START
  87
  88 #ifdef XENIX
  89 /* Data type of load average, as read out of kmem.  */
  90 #define LOAD_AVE_TYPE short
  91
  92 /* Convert that into an integer that is 100 for a load average of 1.0  */
  93 #define LOAD_AVE_CVT(x) (((double) (x)) * 100.0 / FSCALE)
  94
  95 #define FSCALE 256.0         /* determined by experimentation...  */
  96 #endif
  97
  98
  99 #ifdef SOLARIS2
 100 /* Data type of load average, as read out of kmem.  */
 101 #define LOAD_AVE_TYPE long
 102
 103 /* Convert that into an integer that is 100 for a load average of 1.0  */
 104 /* This is totally uncalibrated. */
 105 #define LOAD_AVE_CVT(x) ((int) (((double) (x)) * 100.0 / FSCALE))
 106
 107 /* J.W.Hawtin@lut.ac.uk say Solaris 2.4 as well as Solaris 2.1 on X86
 108    requires -lkvm as well.
 109    And handa@etl.gov.jp says that -lkvm needs -llelf, at least on 2.5.  */
 110 #define LIBS_MACHINE -lkvm -lelf
 111
 112 #ifndef SOLARIS2_4
 113 /* J.W.hawtin@lut.ac.uk says Solaris 2.1 on the X86 has FSCALE defined in a
 114    system header. */
 115
 116 #define HAVE_VFORK
 117
 118 #else /* SOLARIS2_4 */
 119 #ifndef __GNUC__
 120 #if 0 /* wisner@gryphon.com says this screws up cpp */
 121 #define C_SWITCH_MACHINE -Xa
 122 #endif
 123 #ifndef NOT_C_CODE
 124 #ifdef HAVE_ALLOCA_H
 125 #include <alloca.h>
 126 #endif /* HAVE_ALLOCA_H */
 127 #endif /* not NOT_C_CODE */
 128 #endif /* not __GNUC__ */
 129 #endif /* SOLARIS2_4 */
 130
 131 /* configure thinks solaris X86 has gethostname, but it does not work,
 132    so undefine it.  */
 133 #undef HAVE_GETHOSTNAME
 134
 135 #else /* not SOLARIS2 */
 136 #ifdef USG5_4 /* Older USG systems do not support the load average.  */
 137 /* Data type of load average, as read out of kmem.  */
 138
 139 #define LOAD_AVE_TYPE long
 140
 141 /* Convert that into an integer that is 100 for a load average of 1.0  */
 142 /* This is totally uncalibrated. */
 143
 144 #define LOAD_AVE_CVT(x) ((int) (((double) (x)) * 100.0 / FSCALE))
 145 #define FSCALE 256.0
 146 #endif
 147 #endif /* not SOLARIS2 */
 148
 149 /* Define CANNOT_DUMP on machines where unexec does not work.
 150    Then the function dump-emacs will not be defined
 151    and temacs will do (load "loadup") automatically unless told otherwise.  */
 152
 153 /* #define CANNOT_DUMP */
 154
 155 /* Define VIRT_ADDR_VARIES if the virtual addresses of
 156    pure and impure space as loaded can vary, and even their
 157    relative order cannot be relied on.
 158
 159    Otherwise Emacs assumes that text space precedes data space,
 160    numerically.  */
 161
 162 /* #define VIRT_ADDR_VARIES */
 163
 164 #ifdef XENIX
 165 /* Define NO_REMAP if memory segmentation makes it not work well
 166    to change the boundary between the text section and data section
 167    when Emacs is dumped.  If you define this, the preloaded Lisp
 168    code will not be sharable; but that's better than failing completely.  */
 169
 170 #define NO_REMAP
 171
 172 #define STACK_DIRECTION -1
 173
 174 /* Since cannot purify, use standard Xenix 386 startup code. */
 175
 176 #define START_FILES     /lib/386/Sseg.o pre-crt0.o /lib/386/Scrt0.o
 177
 178 /* These really use terminfo.  */
 179
 180 #define LIBS_TERMCAP /lib/386/Slibcurses.a  \
 181    /lib/386/Slibtinfo.a /lib/386/Slibx.a
 182
 183 /* Standard libraries for this machine.  Since `-l' doesn't work in `ld'.  */
 184 /* '__fltused' is unresolved w/o Slibcfp.a */
 185 #define LIB_STANDARD /lib/386/Slibcfp.a /lib/386/Slibc.a
 186 #else /* not XENIX */
 187
 188 /* this brings in alloca() if we're using cc */
 189 #ifdef USG
 190 #ifndef LIB_STANDARD
 191 #ifdef USG5_4
 192 #define LIB_STANDARD -lc
 193 #else /* not USG5_4 */
 194 #define LIB_STANDARD -lPW -lc
 195 #endif /* not USG5_4 */
 196 #endif /* LIB_STANDARD */
 197
 198 /* Paul Abrahams <abrahams@acm.org> says that
 199    Unixware does not have alloca when using cc.  */
 200 #if ! (defined (USG5_4) && ! defined (SOLARIS2) && ! defined (__GNUC__))
 201 #define HAVE_ALLOCA
 202 #endif
 203
 204 #define NO_REMAP
 205 #define TEXT_START 0
 206 #endif /* USG */
 207 #endif /* not XENIX */
 208
 209 #ifdef BSD_SYSTEM
 210 #define HAVE_ALLOCA
 211 #endif /* BSD_SYSTEM */
 212
 213 /* If compiling with GCC, let GCC implement alloca.  */
 214 #if defined(__GNUC__) && !defined(alloca)
 215 #define alloca(n) __builtin_alloca(n)
 216 #define HAVE_ALLOCA
 217 #endif
 218
 219 #ifdef USG5_4
 220 #define DATA_SEG_BITS 0x08000000
 221 #endif
 222
 223 #ifdef MSDOS
 224 #define NO_REMAP
 225 #endif
 226
 227 #ifdef WINDOWSNT
 228 #define VIRT_ADDR_VARIES
 229 #define DATA_END        get_data_end ()
 230 #define DATA_START      get_data_start ()
 231 #define HAVE_ALLOCA
 232 #define NO_ARG_ARRAY
 233 #endif
 234
 235 #ifdef linux
 236 /* libc-linux/sysdeps/linux/i386/ulimit.c says that due to shared library, */
 237 /* we cannot get the maximum address for brk */
 238 #define ULIMIT_BREAK_VALUE (32*1024*1024)
 239
 240 #define SEGMENT_MASK ((SEGMENT_SIZE)-1)
 241 #endif