Enhancements to indentation.
[emacs.git] / Makefile.in
blob571013e32444988ef503f0d7c0cd8f7012d1df9a
1 # DIST: This is the distribution Makefile for Emacs. configure can
2 # DIST: make most of the changes to this file you might want, so try
3 # DIST: that first.
5 # Copyright (C) 1992-2012 Free Software Foundation, Inc.
7 # This file is part of GNU Emacs.
9 # GNU Emacs is free software: you can redistribute it and/or modify
10 # it under the terms of the GNU General Public License as published by
11 # the Free Software Foundation, either version 3 of the License, or
12 # (at your option) any later version.
14 # GNU Emacs is distributed in the hope that it will be useful,
15 # but WITHOUT ANY WARRANTY; without even the implied warranty of
16 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 # GNU General Public License for more details.
19 # You should have received a copy of the GNU General Public License
20 # along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
22 ### Commentary:
24 # make all to compile and build Emacs.
25 # make install to install it.
26 # make TAGS to update tags tables.
28 # make clean or make mostlyclean
29 # Delete all files from the current directory that are normally
30 # created by building the program. Don't delete the files that
31 # record the configuration. Also preserve files that could be made
32 # by building, but normally aren't because the distribution comes
33 # with them.
35 # Delete `.dvi' files here if they are not part of the distribution.
37 # make distclean
38 # Delete all files from the current directory that are created by
39 # configuring or building the program. If you have unpacked the
40 # source and built the program without creating any other files,
41 # `make distclean' should leave only the files that were in the
42 # distribution.
44 # make maintainer-clean
45 # Delete everything from the current directory that can be
46 # reconstructed with this Makefile. This typically includes
47 # everything deleted by distclean, plus more: .elc files,
48 # C source files produced by Bison, tags tables, info files,
49 # and so on.
51 # make extraclean
52 # Still more severe - delete backup and autosave files, too.
54 # make bootstrap
55 # Removes all the compiled files to force a new bootstrap from a
56 # clean slate, and then build in the normal way.
58 SHELL = /bin/sh
60 # This may not work with certain non-GNU make's. It only matters when
61 # inheriting a CDPATH not starting with the current directory.
62 CDPATH=
64 # If Make doesn't predefine MAKE, set it here.
65 @SET_MAKE@
67 # ==================== Things `configure' Might Edit ====================
69 cache_file = @cache_file@
70 CONFIGURE_FLAGS = --cache-file=$(cache_file)
72 CC=@CC@
73 CFLAGS=@CFLAGS@
74 LDFLAGS=@LDFLAGS@
75 CPPFLAGS=@CPPFLAGS@
76 EXEEXT=@EXEEXT@
78 ### These help us choose version- and architecture-specific directories
79 ### to install files in.
81 ### This should be the number of the Emacs version we're building,
82 ### like `18.59' or `19.0'.
83 version=@version@
85 ### This should be the name of the configuration we're building Emacs
86 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
87 configuration=@configuration@
89 # ==================== Where To Install Things ====================
91 # Location to install Emacs.app under GNUstep / Mac OS X.
92 # Later values may use these.
93 ns_appbindir=@ns_appbindir@
94 ns_appresdir=@ns_appresdir@
95 # Either yes or no depending on whether this is a relocatable Emacs.app.
96 ns_self_contained=@ns_self_contained@
98 # The default location for installation. Everything is placed in
99 # subdirectories of this directory. The default values for many of
100 # the variables below are expressed in terms of this one, so you may
101 # not need to change them. This defaults to /usr/local.
102 prefix=@prefix@
104 # Like `prefix', but used for architecture-specific files.
105 exec_prefix=@exec_prefix@
107 # Where to install Emacs and other binaries that people will want to
108 # run directly (like etags).
109 bindir=@bindir@
111 # The root of the directory tree for read-only architecture-independent
112 # data files. ${datadir}, ${infodir} and ${mandir} are based on this.
113 datarootdir=@datarootdir@
115 # Where to install architecture-independent data files. ${lispdir}
116 # and ${etcdir} are subdirectories of this.
117 datadir=@datadir@
119 # Where to install and expect the files that Emacs modifies as it
120 # runs. These files are all architecture-independent.
121 # Right now, this is not used.
122 sharedstatedir=@sharedstatedir@
124 # Where to install and expect executable files to be run by Emacs
125 # rather than directly by users (and other architecture-dependent
126 # data, although Emacs does not have any). The executables
127 # are actually installed in ${archlibdir}, which is (normally)
128 # a subdirectory of this.
129 libexecdir=@libexecdir@
131 # Where to install Emacs's man pages.
132 # Note they contain cross-references that expect them to be in section 1.
133 mandir=@mandir@
134 man1dir=$(mandir)/man1
136 # Where to install and expect the info files describing Emacs.
137 infodir=@infodir@
138 # Info files not in the doc/misc directory (we get those via make echo-info).
139 INFO_EXT=@INFO_EXT@
140 INFO_NONMISC=emacs$(INFO_EXT) eintr$(INFO_EXT) elisp$(INFO_EXT)
142 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
143 HAVE_MAKEINFO=@HAVE_MAKEINFO@
145 # Directory for local state files for all programs.
146 localstatedir=@localstatedir@
148 # Where to look for bitmap files.
149 bitmapdir=@bitmapdir@
151 # Where to find the source code. The source code for Emacs's C kernel is
152 # expected to be in ${srcdir}/src, and the source code for Emacs's
153 # utility programs is expected to be in ${srcdir}/lib-src. This is
154 # set by the configure script's `--srcdir' option.
156 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
157 srcdir=@srcdir@
159 # Where the manpage source files are kept.
160 mansrcdir=$(srcdir)/doc/man
162 # Tell make where to find source files; this is needed for the makefiles.
163 VPATH=@srcdir@
165 # Where to find the application default.
166 x_default_search_path=@x_default_search_path@
168 # Where the etc/emacs.desktop file is to be installed.
169 desktopdir=$(datarootdir)/applications
171 # Where the etc/images/icons/hicolor directory is to be installed.
172 icondir=$(datarootdir)/icons
174 # The source directory for the icon files.
175 iconsrcdir=$(srcdir)/etc/images/icons
177 # ==================== Emacs-specific directories ====================
179 # These variables hold the values Emacs will actually use. They are
180 # based on the values of the standard Make variables above.
182 # Where to install the lisp, leim files distributed with
183 # Emacs. This includes the Emacs version, so that the
184 # lisp files for different versions of Emacs will install
185 # themselves in separate directories.
186 lispdir=@lispdir@
187 leimdir=@leimdir@
189 # Directories Emacs should search for standard lisp files.
190 # The default is ${lispdir}:${leimdir}.
191 standardlisppath=@standardlisppath@
193 # Directories Emacs should search for lisp files specific to this
194 # site (i.e. customizations), before consulting ${standardlisppath}.
195 # This should be a colon-separated list of directories.
196 locallisppath=@locallisppath@
198 # Where Emacs will search to find its lisp files. Before
199 # changing this, check to see if your purpose wouldn't
200 # better be served by changing locallisppath. This
201 # should be a colon-separated list of directories.
202 # The default is ${locallisppath}:${standardlisppath}.
203 lisppath=@lisppath@
205 # Where Emacs will search for its lisp files while
206 # building. This is only used during the process of
207 # compiling Emacs, to help Emacs find its lisp files
208 # before they've been installed in their final location.
209 # This should be a colon-separated list of directories.
210 # Normally it points to the lisp/ directory in the sources.
211 buildlisppath=${srcdir}/lisp
213 # Where to install the other architecture-independent
214 # data files distributed with Emacs (like the tutorial,
215 # the cookie recipes and the Zippy database). This path
216 # usually contains the Emacs version number, so the data
217 # files for multiple versions of Emacs may be installed
218 # at once.
219 etcdir=@etcdir@
221 # Where to put executables to be run by Emacs rather than
222 # the user. This path usually includes the Emacs version
223 # and configuration name, so that multiple configurations
224 # for multiple versions of Emacs may be installed at
225 # once.
226 archlibdir=@archlibdir@
228 # Where to put the docstring file.
229 docdir=@docdir@
231 # Where to install Emacs game score files.
232 gamedir=@gamedir@
234 # ==================== Utility Programs for the Build ====================
236 # Allow the user to specify the install program.
237 # Note that if the system does not provide a suitable install,
238 # configure will use build-aux/install-sh. Annoyingly, it does
239 # not use an absolute path. So we must take care to always run
240 # INSTALL-type commands from the directory containing the Makefile.
241 # This explains (I think) the cd thisdir seen in several install rules.
242 INSTALL = @INSTALL@
243 INSTALL_PROGRAM = @INSTALL_PROGRAM@
244 INSTALL_DATA = @INSTALL_DATA@
245 INSTALL_INFO = @INSTALL_INFO@
246 # By default, we uphold the dignity of our programs.
247 INSTALL_STRIP =
248 MKDIR_P = @MKDIR_P@
249 LN_S = @LN_S@
251 # We use gzip to compress installed .el files.
252 GZIP_PROG = @GZIP_PROG@
253 # If non-nil, gzip the installed Info and man pages.
254 GZIP_INFO = @GZIP_INFO@
256 # ============================= Targets ==============================
258 # Program name transformation.
259 TRANSFORM = @program_transform_name@
261 # What emacs should be called when installed.
262 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
263 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
265 # Subdirectories to make recursively.
266 SUBDIR = lib lib-src src lisp leim
268 # The subdir makefiles created by config.status.
269 SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
270 SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
272 # Subdirectories to install, and where they'll go.
273 # lib-src's makefile knows how to install it, so we don't do that here.
274 # Directories that cannot simply be copied, eg info,
275 # are treated separately.
276 # quail appears twice because in out-of-tree builds, it exists twice.
277 COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
278 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail
280 all: ${SUBDIR}
282 .PHONY: all ${SUBDIR} blessmail epaths-force FRC
284 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
286 # Generate epaths.h from epaths.in. This target is invoked by `configure'.
287 # See comments in configure.ac for why it is done this way, as opposed
288 # to just letting configure generate epaths.h from epaths.in in a
289 # similar way to how Makefile is made from Makefile.in.
290 epaths-force: FRC
291 @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
292 locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
293 buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
294 x_default_search_path=`echo ${x_default_search_path}`; \
295 gamedir=`echo ${gamedir}`; \
296 sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
297 -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
298 -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
299 -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
300 -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
301 -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
302 -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
303 -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
304 -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
305 -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
306 -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \
307 ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
309 lib-src src: lib
311 src: lib-src FRC
313 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'
314 # and `leim'.
315 lisp leim: src
317 # These targets should be "${SUBDIR} without `src'".
318 lib lib-src lisp leim: Makefile FRC
319 cd $@ && $(MAKE) all $(MFLAGS) \
320 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
321 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
323 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
324 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
325 # constructed yet) or the empty string (otherwise).
326 # src/Makefile.in uses it to implement conditional dependencies, so that
327 # files that need bootstrap-emacs to be built do not additionally need
328 # to be kept fresher than bootstrap-emacs. Otherwise changing a single
329 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
330 # all preloaded elisp files, and only then dump the actual src/emacs, which
331 # is not wrong, but is overkill in 99.99% of the cases.
332 src: Makefile FRC
333 boot=bootstrap-emacs$(EXEEXT); \
334 if [ ! -x "src/$$boot" ]; then \
335 cd $@; $(MAKE) all $(MFLAGS) \
336 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
337 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \
339 if [ -r .bzr/checkout/dirstate ]; then \
340 vcswitness="`pwd`/.bzr/checkout/dirstate"; \
341 fi; \
342 cd $@; $(MAKE) all $(MFLAGS) \
343 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
344 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="" \
345 VCSWITNESS="$$vcswitness"
347 blessmail: Makefile src FRC
348 cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \
349 MAKE='${MAKE}' archlibdir='$(archlibdir)'
351 # We used to have one rule per */Makefile.in, but that leads to race
352 # conditions with parallel makes, so let's assume that the time stamp on
353 # ./Makefile is representative of the time stamp on all the other Makefiles.
355 # config.status overrides MAKEFILE_NAME with a bogus name when creating
356 # src/epaths.h, so that 'make epaths-force' does not recursively invoke
357 # config.status and overwrite config.status while executing it (Bug#11214).
359 # 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
360 # then attempts to build that file. This forces 'Makefile', 'lib/Makefile',
361 # etc. to be built without running into similar recursion problems.
362 MAKEFILE_NAME = Makefile
363 $(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
364 $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN)
365 MAKE='$(MAKE)' ./config.status
367 # Don't erase these files if make is interrupted while refreshing them.
368 .PRECIOUS: Makefile config.status
370 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
371 if [ -x ./config.status ]; then \
372 ./config.status --recheck; \
373 else \
374 $(srcdir)/configure $(CONFIGURE_FLAGS); \
377 AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
379 $(srcdir)/configure: $(AUTOCONF_INPUTS)
380 cd ${srcdir} && autoconf
382 ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4
383 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
384 cd $(srcdir) && aclocal -I m4
386 AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \
387 $(srcdir)/lib/gnulib.mk
388 $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
389 cd $(srcdir) && automake --gnu -a -c lib/Makefile
391 # Regenerate files that this makefile would have made, if this makefile
392 # had been built by Automake. The name 'am--refresh' is for
393 # compatibility with subsidiary Automake-generated makefiles.
394 am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
395 .PHONY: am--refresh
397 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
398 @ # Usually, there's no need to rebuild src/config.in just
399 @ # because stamp-h.in has changed (since building stamp-h.in
400 @ # refreshes config.in as well), but if config.in is missing
401 @ # then we really need to do something more.
402 [ -r "$@" ] || ( cd ${srcdir} && autoheader )
403 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
404 cd ${srcdir} && autoheader
405 rm -f $(srcdir)/src/stamp-h.in
406 echo timestamp > $(srcdir)/src/stamp-h.in
408 # ==================== Installation ====================
410 .PHONY: install install-arch-dep install-arch-indep install-doc install-info
411 .PHONY: install-man install-etc install-strip uninstall
413 ## If we let lib-src do its own installation, that means we
414 ## don't have to duplicate the list of utilities to install in
415 ## this Makefile as well.
417 install: all install-arch-indep install-doc install-arch-dep blessmail
418 @true
420 ## Ensure that $subdir contains a subdirs.el file.
421 ## Here and elsewhere, we set the umask so that any created files are
422 ## world-readable.
423 ## TODO it might be good to warn about non-standard permissions of
424 ## pre-existing directories, but that does not seem easy.
425 write_subdir=if [ -f $${subdir}/subdirs.el ]; \
426 then true; \
427 else \
428 umask 022; \
429 ${MKDIR_P} $${subdir}; \
430 (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
431 echo " (normal-top-level-add-subdirs-to-load-path))") \
432 > $${subdir}/subdirs.el; \
435 ### Install the executables that were compiled specifically for this machine.
436 ### We do install-arch-indep first because the executable needs the
437 ### Lisp files and DOC file to work properly.
438 install-arch-dep: src install-arch-indep install-doc
439 umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
440 cd lib-src && \
441 $(MAKE) install $(MFLAGS) prefix=${prefix} \
442 exec_prefix=${exec_prefix} bindir=${bindir} \
443 libexecdir=${libexecdir} archlibdir=${archlibdir} \
444 INSTALL_STRIP=${INSTALL_STRIP}
445 if test "${ns_self_contained}" = "no"; then \
446 ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
447 chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) ; \
448 if test "x${NO_BIN_LINK}" = x; then \
449 rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
450 cd $(DESTDIR)${bindir} && $(LN_S) $(EMACSFULL) $(EMACS); \
451 fi; \
452 else \
453 subdir=${ns_appresdir}/site-lisp; \
454 ${write_subdir} || exit 1; \
455 rm -rf ${ns_appresdir}/share; \
458 ## In the share directory, we are deleting:
459 ## applications (with emacs.desktop, also found in etc/)
460 ## emacs (basically empty except for unneeded site-lisp directories)
461 ## icons (duplicates etc/images/icons/hicolor)
463 ## This is install-etc for everything except self-contained-ns builds.
464 ## For them, it is empty.
465 INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
467 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
468 ## Needs to be the user running install, so configure can't set it.
469 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
470 `id -un 2> /dev/null`; do \
471 [ -n "$${installuser}" ] && break ; \
472 done
474 ### Install the files that are machine-independent.
475 ### Most of them come straight from the distribution; the exception is
476 ### the DOC file, which is copied from the build directory.
478 ## We delete each directory in ${COPYDESTS} before we copy into it;
479 ## that way, we can reinstall over directories that have been put in
480 ## place with their files read-only (perhaps because they are checked
481 ## into RCS). In order to make this safe, we make sure that the
482 ## source exists and is distinct from the destination.
484 ## We delete etc/DOC* because there may be irrelevant DOC files from
485 ## other builds in the source directory. This is ok because we just
486 ## deleted the entire installed etc/ directory and recreated it.
487 ## install-doc installs the relevant DOC.
489 ## Note that the Makefiles in the etc directory are potentially useful
490 ## in an installed Emacs, so should not be excluded.
492 ## I'm not sure creating locallisppath here serves any useful purpose.
493 ## If it has the default value, then the later write_subdir commands
494 ## will ensure all these components exist.
495 ## This will only do something if locallisppath has a non-standard value.
496 ## Is it really Emacs's job to create those directories?
497 ## Should we also be ensuring they contain subdirs.el files?
498 ## It would be easy to do, just use write_subdir.
500 ## Note that we use tar instead of plain old cp -R/-r because the latter
501 ## is apparently not portable (even in 2012!).
502 ## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
503 ## I have no idea which platforms Emacs supports where cp -R does not
504 ## work correctly, and therefore no idea when tar can be replaced.
505 ## See also these comments from 2004 about cp -r working fine:
506 ## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
507 install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
508 umask 022 ; \
509 locallisppath='${locallisppath}'; \
510 IFS=:; \
511 for d in $$locallisppath; do \
512 ${MKDIR_P} "$(DESTDIR)$$d"; \
513 done
514 -set ${COPYDESTS} ; \
515 unset CDPATH; \
516 $(set_installuser); \
517 for dir in ${COPYDIR} ; do \
518 [ -d $${dir} ] || exit 1 ; \
519 dest=$$1 ; shift ; \
520 [ -d $${dest} ] && \
521 [ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \
522 continue ; \
523 if [ "$${dir}" = "leim/quail" ]; then \
524 [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \
525 continue ; \
526 else \
527 rm -rf $${dest} ; \
528 umask 022; ${MKDIR_P} $${dest} ; \
529 fi ; \
530 echo "Copying $${dir} to $${dest}..." ; \
531 (cd $${dir}; tar -chf - . ) \
532 | (cd $${dest}; umask 022; \
533 tar -xvf - && cat > /dev/null) || exit 1; \
534 [ "$${dir}" != "${srcdir}/etc" ] || rm -f $${dest}/DOC* ; \
535 for subdir in `find $${dest} -type d -print` ; do \
536 rm -f $${subdir}/.gitignore ; \
537 rm -f $${subdir}/.arch-inventory ; \
538 rm -f $${subdir}/.DS_Store ; \
539 rm -f $${subdir}/\#* ; \
540 rm -f $${subdir}/.\#* ; \
541 rm -f $${subdir}/*~ ; \
542 rm -f $${subdir}/*.orig ; \
543 rm -f $${subdir}/ChangeLog* ; \
544 [ "$${dir}" != "${srcdir}/etc" ] && \
545 rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
546 done ; \
547 find $${dest} -exec chown $${installuser} {} ';' ;\
548 done
549 -rm -f $(DESTDIR)${leimdir}/leim-list.el
550 ${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el
551 -rm -f $(DESTDIR)${lispdir}/subdirs.el
552 umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir}
553 subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
554 ${write_subdir}
555 subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
556 ${write_subdir} || true
557 [ -z "${GZIP_PROG}" ] || \
558 ( echo "Compressing *.el ..." ; \
559 unset CDPATH; \
560 thisdir=`/bin/pwd`; \
561 for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \
562 cd $${thisdir} ; \
563 cd $${dir} || exit 1 ; \
564 for f in `find . -name "*.elc" -print`; do \
565 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
566 done ; \
567 done )
568 -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
570 # The last chmod isn't needed at present.
572 ## We install only the relevant DOC file if possible
573 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
574 ## (Note "otherwise" is inaccurate since 2009-08-23.)
576 ## Note that install-arch-indep deletes and recreates the entire
577 ## installed etc/ directory, so we need it to run before this does.
578 install-doc: src install-arch-indep
579 -unset CDPATH; \
580 umask 022; ${MKDIR_P} $(DESTDIR)${docdir} ; \
581 if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${docdir}; /bin/pwd` ]; \
582 then \
583 fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
584 if [ -f "./etc/DOC-$${fullversion}" ]; \
585 then \
586 docfile="DOC-$${fullversion}"; \
587 else \
588 docfile="DOC"; \
589 fi; \
590 echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
591 ${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${docdir}/$${docfile}; \
592 $(set_installuser); \
593 chown $${installuser} $(DESTDIR)${docdir}/$${docfile} || true ; \
594 else true; fi
596 install-info: info
597 umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
598 -unset CDPATH; \
599 thisdir=`/bin/pwd`; \
600 [ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \
601 (cd $(DESTDIR)${infodir}; \
602 [ -f dir ] || \
603 (cd $${thisdir}; \
604 ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
605 info_misc=`cd $${thisdir}/doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
606 cd ${srcdir}/info ; \
607 for elt in ${INFO_NONMISC} $${info_misc}; do \
608 test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
609 for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
610 (cd $${thisdir}; \
611 ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
612 ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
613 rm -f $(DESTDIR)${infodir}/$$f.gz; \
614 ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
615 done; \
616 (cd $${thisdir}; \
617 ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
618 done)
620 install-man:
621 umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
622 thisdir=`/bin/pwd`; \
623 cd ${mansrcdir}; \
624 for page in *.1; do \
625 (cd $${thisdir}; \
626 ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}); \
627 ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
628 rm -f $(DESTDIR)${man1dir}/$${page}.gz; \
629 ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \
630 done
632 ## Install those items from etc/ that need to end up elsewhere.
633 install-etc:
634 umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
635 ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
636 $(DESTDIR)${desktopdir}/emacs.desktop
637 thisdir=`/bin/pwd`; \
638 cd ${iconsrcdir} || exit 1; umask 022 ; \
639 for dir in */*/apps */*/mimetypes; do \
640 [ -d $${dir} ] || continue ; \
641 ( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \
642 for icon in $${dir}/*.*; do \
643 [ -r $${icon} ] || continue ; \
644 ( cd $${thisdir}; \
645 ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${icon} ) \
646 || exit 1; \
647 done ; \
648 done
650 ### Build Emacs and install it, stripping binaries while installing them.
651 install-strip:
652 $(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
654 ### Delete all the installed files that the `install' target would
655 ### create (but not the noninstalled files such as `make all' would create).
657 ### Don't delete the lisp and etc directories if they're in the source tree.
658 uninstall:
659 cd lib-src && \
660 $(MAKE) $(MFLAGS) uninstall \
661 prefix=${prefix} exec_prefix=${exec_prefix} \
662 bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
663 -unset CDPATH; \
664 for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \
665 if [ -d $${dir} ]; then \
666 case `cd $${dir} ; /bin/pwd` in \
667 `cd ${srcdir} ; /bin/pwd`* ) ;; \
668 * ) rm -rf $${dir} ;; \
669 esac ; \
670 case $${dir} in \
671 $(DESTDIR)${datadir}/emacs/${version}/* ) \
672 rm -rf $(DESTDIR)${datadir}/emacs/${version} \
673 ;; \
674 esac ; \
675 fi ; \
676 done
677 -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
678 thisdir=`/bin/pwd`; \
679 (info_misc=`cd doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
680 cd $(DESTDIR)${infodir} && \
681 for elt in ${INFO_NONMISC} $${info_misc}; do \
682 (cd $${thisdir}; \
683 $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
684 if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
685 ext=.gz; else ext=; fi; \
686 rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
687 done;)
688 (if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
689 ext=.gz; else ext=; fi; \
690 cd ${mansrcdir} && for page in *.1; do \
691 rm -f $(DESTDIR)${man1dir}/$$page$$ext; done )
692 (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS))
693 (cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg )
694 -rm -f $(DESTDIR)${desktopdir}/emacs.desktop
695 for file in snake-scores tetris-scores; do \
696 file=$(DESTDIR)${gamedir}/$${file}; \
697 [ -s $${file} ] || rm -f $$file; \
698 done
700 FRC:
702 # ==================== Cleaning up and miscellanea ====================
704 .PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
706 ### `mostlyclean'
707 ### Like `clean', but may refrain from deleting a few files that people
708 ### normally don't want to recompile. For example, the `mostlyclean'
709 ### target for GCC does not delete `libgcc.a', because recompiling it
710 ### is rarely necessary and takes a lot of time.
711 mostlyclean: FRC
712 (cd src; $(MAKE) $(MFLAGS) mostlyclean)
713 (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
714 (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
715 (cd lib; $(MAKE) $(MFLAGS) mostlyclean)
716 (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
717 -(cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean)
718 -(cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean)
719 -(cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean)
720 -(cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean)
721 (cd leim; $(MAKE) $(MFLAGS) mostlyclean)
723 ### `clean'
724 ### Delete all files from the current directory that are normally
725 ### created by building the program. Don't delete the files that
726 ### record the configuration. Also preserve files that could be made
727 ### by building, but normally aren't because the distribution comes
728 ### with them.
730 ### Delete `.dvi' files here if they are not part of the distribution.
731 clean: FRC
732 (cd src; $(MAKE) $(MFLAGS) clean)
733 (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
734 (cd lwlib; $(MAKE) $(MFLAGS) clean)
735 (cd lib; $(MAKE) $(MFLAGS) clean)
736 (cd lib-src; $(MAKE) $(MFLAGS) clean)
737 -(cd doc/emacs && $(MAKE) $(MFLAGS) clean)
738 -(cd doc/misc && $(MAKE) $(MFLAGS) clean)
739 -(cd doc/lispref && $(MAKE) $(MFLAGS) clean)
740 -(cd doc/lispintro && $(MAKE) $(MFLAGS) clean)
741 (cd leim; $(MAKE) $(MFLAGS) clean)
742 (cd nextstep && $(MAKE) $(MFLAGS) clean)
744 ### `bootclean'
745 ### Delete all files that need to be remade for a clean bootstrap.
746 top_bootclean=\
747 rm -f config.cache config.log
748 ### `distclean'
749 ### Delete all files from the current directory that are created by
750 ### configuring or building the program. If you have unpacked the
751 ### source and built the program without creating any other files,
752 ### `make distclean' should leave only the files that were in the
753 ### distribution.
754 top_distclean=\
755 ${top_bootclean}; \
756 rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
757 distclean: FRC
758 (cd src; $(MAKE) $(MFLAGS) distclean)
759 (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
760 (cd lwlib; $(MAKE) $(MFLAGS) distclean)
761 (cd lib; $(MAKE) $(MFLAGS) distclean)
762 (cd lib-src; $(MAKE) $(MFLAGS) distclean)
763 (cd doc/emacs && $(MAKE) $(MFLAGS) distclean)
764 (cd doc/misc && $(MAKE) $(MFLAGS) distclean)
765 (cd doc/lispref && $(MAKE) $(MFLAGS) distclean)
766 (cd doc/lispintro && $(MAKE) $(MFLAGS) distclean)
767 (cd leim; $(MAKE) $(MFLAGS) distclean)
768 (cd lisp; $(MAKE) $(MFLAGS) distclean)
769 (cd nextstep && $(MAKE) $(MFLAGS) distclean)
770 ${top_distclean}
772 ### `bootstrap-clean'
773 ### Delete everything that can be reconstructed by `make' and that
774 ### needs to be deleted in order to force a bootstrap from a clean state.
775 bootstrap-clean: FRC
776 (cd src; $(MAKE) $(MFLAGS) bootstrap-clean)
777 (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
778 (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
779 (cd lib; $(MAKE) $(MFLAGS) maintainer-clean)
780 (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
781 -(cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean)
782 -(cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean)
783 -(cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean)
784 -(cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean)
785 (cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
786 (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean)
787 (cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean)
788 [ ! -f config.log ] || mv -f config.log config.log~
789 ${top_bootclean}
791 ### `maintainer-clean'
792 ### Delete everything from the current directory that can be
793 ### reconstructed with this Makefile. This typically includes
794 ### everything deleted by distclean, plus more: C source files
795 ### produced by Bison, tags tables, info files, and so on.
797 ### One exception, however: `make maintainer-clean' should not delete
798 ### `configure' even if `configure' can be remade using a rule in the
799 ### Makefile. More generally, `make maintainer-clean' should not delete
800 ### anything that needs to exist in order to run `configure' and then
801 ### begin to build the program.
802 top_maintainer_clean=\
803 ${top_distclean}; \
804 rm -fr autom4te.cache
805 maintainer-clean: bootstrap-clean FRC
806 (cd src; $(MAKE) $(MFLAGS) maintainer-clean)
807 (cd lisp; $(MAKE) $(MFLAGS) maintainer-clean)
808 ${top_maintainer_clean}
810 ### This doesn't actually appear in the coding standards, but Karl
811 ### says GCC supports it, and that's where the configuration part of
812 ### the coding standards seem to come from. It's like distclean, but
813 ### it deletes backup and autosave files too.
814 extraclean:
815 for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
816 ${top_maintainer_clean}
817 -rm -f config-tmp-*
818 -rm -f *~ \#*
820 # The src subdir knows how to do the right thing
821 # even when the build directory and source dir are different.
822 .PHONY: TAGS tags
823 TAGS tags: lib lib-src src
824 cd src; $(MAKE) $(MFLAGS) tags
826 check:
827 @if test ! -d test/automated; then \
828 echo "You do not seem to have the test/ directory."; \
829 echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
830 else \
831 cd test/automated && $(MAKE) $(MFLAGS) check; \
834 dist:
835 cd ${srcdir}; ./make-dist
837 .PHONY: info dvi dist check html info-real force-info check-info-dir
839 info-real:
840 (cd doc/emacs; $(MAKE) $(MFLAGS) info)
841 (cd doc/misc; $(MAKE) $(MFLAGS) info)
842 (cd doc/lispref; $(MAKE) $(MFLAGS) info)
843 (cd doc/lispintro; $(MAKE) $(MFLAGS) info)
845 force-info:
846 # Note that man/Makefile knows how to put the info files in $(srcdir),
847 # so we can do ok running make in the build dir.
848 # This used to have a clause that exited with an error if MAKEINFO = no.
849 # But it is inappropriate to do so without checking if makeinfo is
850 # actually needed - it is not if the info files are up-to-date. (Bug#3982)
851 # Only the doc/*/Makefiles can decide that, so we let those rules run
852 # and give a standard error if makeinfo is needed but missing.
853 # While it would be nice to give a more detailed error message, that
854 # would require changing every rule in doc/ that builds an info file,
855 # and it's not worth it. This case is only relevant if you download a
856 # release, then change the .texi files.
857 info: force-info
858 @if test "$(HAVE_MAKEINFO)" = "no"; then \
859 echo "Configured --without-makeinfo, not building manuals" ; \
860 else \
861 $(MAKE) $(MFLAGS) info-real ; \
864 # The info/dir file must be updated by hand when new manuals are added.
865 check-info-dir: info
866 cd info ; \
867 missing= ; \
868 for file in *; do \
869 test -f "$${file}" || continue ; \
870 case $${file} in \
871 *-[0-9]*|COPYING|dir) continue ;; \
872 esac ; \
873 file=`echo $${file} | sed 's/\.info//'` ; \
874 grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
875 done ; \
876 if test -n "$${missing}"; then \
877 echo "Missing info/dir entries: $${missing}" ; \
878 exit 1 ; \
879 fi ; \
880 echo "info/dir is OK"
882 dvi:
883 (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
884 (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
885 (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
886 (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
888 #### Bootstrapping.
890 ### This first cleans the lisp subdirectory, removing all compiled
891 ### Lisp files. Then re-run make to build all the files anew.
893 .PHONY: bootstrap
895 # Bootstrapping does the following:
896 # * Remove files to start from a bootstrap-clean slate.
897 # * Run autogen.sh, falling back on copy_autogen if autogen.sh fails.
898 # * Rebuild Makefile, to update the build procedure itself.
899 # * Do the actual build.
900 bootstrap: bootstrap-clean FRC
901 cd $(srcdir) && { ./autogen.sh || autogen/copy_autogen; }
902 $(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
903 $(MAKE) $(MFLAGS) info all
905 .PHONY: check-declare
907 check-declare:
908 @if [ ! -f $(srcdir)/src/emacs ]; then \
909 echo "You must build Emacs to use this command"; \
910 exit 1; \
912 (cd leim; $(MAKE) $(MFLAGS) $@)
913 (cd lisp; $(MAKE) $(MFLAGS) $@)