Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
   6 #   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
   7 #   Free Software Foundation, Inc.
   8
   9 # This file is part of GNU Emacs.
  10
  11 # GNU Emacs is free software; you can redistribute it and/or modify
  12 # it under the terms of the GNU General Public License as published by
  13 # the Free Software Foundation; either version 3, or (at your option)
  14 # any later version.
  15
  16 # GNU Emacs is distributed in the hope that it will be useful,
  17 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  18 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19 # GNU General Public License for more details.
  20
  21 # You should have received a copy of the GNU General Public License
  22 # along with GNU Emacs; see the file COPYING.  If not, write to
  23 # the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  24 # Boston, MA 02110-1301, USA.
  25
  26 # make all      to compile and build Emacs.
  27 # make install  to install it.
  28 # make TAGS     to update tags tables.
  29 #
  30 # make clean  or  make mostlyclean
  31 #      Delete all files from the current directory that are normally
  32 #      created by building the program.  Don't delete the files that
  33 #      record the configuration.  Also preserve files that could be made
  34 #      by building, but normally aren't because the distribution comes
  35 #      with them.
  36 #
  37 #      Delete `.dvi' files here if they are not part of the distribution.
  38 #
  39 # make distclean
  40 #      Delete all files from the current directory that are created by
  41 #      configuring or building the program.  If you have unpacked the
  42 #      source and built the program without creating any other files,
  43 #      `make distclean' should leave only the files that were in the
  44 #      distribution.
  45 #
  46 # make maintainer-clean
  47 #      Delete everything from the current directory that can be
  48 #      reconstructed with this Makefile.  This typically includes
  49 #      everything deleted by distclean, plus more: .elc files,
  50 #      C source files produced by Bison, tags tables, info files,
  51 #      and so on.
  52 #
  53 # make extraclean
  54 #      Still more severe - delete backup and autosave files, too.
  55 #
  56 # make bootstrap
  57 #      Recompiles all the Emacs Lisp files using the latest source,
  58 #      then rebuilds Emacs.
  59 #
  60 # make bootfast
  61 #      Recompiles changed Emacs Lisp files using the latest C source,
  62 #      then rebuilds Emacs.  This is faster than `make bootstrap'
  63 #      but once in a while an old .elc file can cause trouble.
  64
  65 SHELL = /bin/sh
  66
  67 # This may not work with certain non-GNU make's.  It only matters when
  68 # inheriting a CDPATH not starting with the current directory.
  69 CDPATH=
  70
  71 # If Make doesn't predefine MAKE, set it here.
  72 @SET_MAKE@
  73
  74 # ==================== Things `configure' Might Edit ====================
  75
  76 CC=@CC@
  77 CPP=@CPP@
  78 C_SWITCH_SYSTEM=@c_switch_system@
  79 ALLOCA=@ALLOCA@
  80 LN_S=@LN_S@
  81 CFLAGS=@CFLAGS@
  82 LDFLAGS=@LDFLAGS@
  83 CPPFLAGS=@CPPFLAGS@
  84 C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
  85 LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
  86 EXEEXT=@EXEEXT@
  87
  88 ### These help us choose version- and architecture-specific directories
  89 ### to install files in.
  90
  91 ### This should be the number of the Emacs version we're building,
  92 ### like `18.59' or `19.0'.
  93 version=@version@
  94
  95 ### This should be the name of the configuration we're building Emacs
  96 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  97 configuration=@configuration@
  98
  99 # ==================== Where To Install Things ====================
 100
 101 # The default location for installation.  Everything is placed in
 102 # subdirectories of this directory.  The default values for many of
 103 # the variables below are expressed in terms of this one, so you may
 104 # not need to change them.  This defaults to /usr/local.
 105 prefix=@prefix@
 106
 107 # Like `prefix', but used for architecture-specific files.
 108 exec_prefix=@exec_prefix@
 109
 110 # Where to install Emacs and other binaries that people will want to
 111 # run directly (like etags).
 112 bindir=@bindir@
 113
 114 # The root of the directory tree for read-only architecture-independent
 115 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 116 datarootdir=@datarootdir@
 117
 118 # Where to install architecture-independent data files.  ${lispdir}
 119 # and ${etcdir} are subdirectories of this.
 120 datadir=@datadir@
 121
 122 # Where to install and expect the files that Emacs modifies as it
 123 # runs.  These files are all architecture-independent.
 124 # Right now, this is not used.
 125 sharedstatedir=@sharedstatedir@
 126
 127 # Where to install and expect executable files to be run by Emacs
 128 # rather than directly by users, and other architecture-dependent
 129 # data.  ${archlibdir} is a subdirectory of this.
 130 libexecdir=@libexecdir@
 131
 132 # Where to install Emacs's man pages, and what extension they should have.
 133 mandir=@mandir@
 134 manext=.1
 135 man1dir=$(mandir)/man1
 136
 137 # Where to install and expect the info files describing Emacs.  In the
 138 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
 139 # since there are now many packages documented with the texinfo
 140 # system, it is inappropriate to imply that it is part of Emacs.
 141 infodir=@infodir@
 142 INFO_FILES=ada-mode autotype calc ccmode cl dbus dired-x ebrowse ediff  \
 143            efaq eintr elisp emacs emacs-mime epa erc eshell eudc        \
 144            flymake forms gnus idlwave info message mh-e newsticker      \
 145            nxml-mode org pcl-cvs pgg rcirc reftex remember sc ses sieve \
 146            speedbar tramp vip viper widget woman smtpmail url
 147
 148 # Directory for local state files for all programs.
 149 localstatedir=@localstatedir@
 150
 151 # Where to look for bitmap files.
 152 bitmapdir=@bitmapdir@
 153
 154 # Where to find the source code.  The source code for Emacs's C kernel is
 155 # expected to be in ${srcdir}/src, and the source code for Emacs's
 156 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 157 # set by the configure script's `--srcdir' option.
 158
 159 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 160 srcdir=@srcdir@
 161
 162 # Where the manpage source files are kept.
 163 mansrcdir=$(srcdir)/doc/man
 164
 165 # Tell make where to find source files; this is needed for the makefiles.
 166 VPATH=@srcdir@
 167
 168 # Where to find the application default.
 169 x_default_search_path=@x_default_search_path@
 170
 171 # Location to install Emacs.app on Mac OS X
 172 carbon_appdir=@carbon_appdir@
 173
 174 # Where the etc/emacs.desktop file is to be installed.
 175 desktopdir=$(datarootdir)/applications
 176
 177 # Where the etc/images/icons/hicolor directory is to be installed.
 178 icondir=$(datarootdir)/icons
 179
 180 # The source directory for the icon files.
 181 iconsrcdir=$(srcdir)/etc/images/icons
 182
 183 # ==================== Emacs-specific directories ====================
 184
 185 # These variables hold the values Emacs will actually use.  They are
 186 # based on the values of the standard Make variables above.
 187
 188 # Where to install the lisp files distributed with
 189 # Emacs.  This includes the Emacs version, so that the
 190 # lisp files for different versions of Emacs will install
 191 # themselves in separate directories.
 192 lispdir=@lispdir@
 193
 194 # Directories Emacs should search for lisp files specific
 195 # to this site (i.e. customizations), before consulting
 196 # ${lispdir}.  This should be a colon-separated list of
 197 # directories.
 198 locallisppath=@locallisppath@
 199
 200 # Where Emacs will search to find its lisp files.  Before
 201 # changing this, check to see if your purpose wouldn't
 202 # better be served by changing locallisppath.  This
 203 # should be a colon-separated list of directories.
 204 lisppath=@lisppath@
 205
 206 # Where Emacs will search for its lisp files while
 207 # building.  This is only used during the process of
 208 # compiling Emacs, to help Emacs find its lisp files
 209 # before they've been installed in their final location.
 210 # It's usually identical to lisppath, except that
 211 # it does not include locallisppath, and the
 212 # entry for the directory containing the installed lisp
 213 # files has been replaced with ../lisp.  This should be a
 214 # colon-separated list of directories.
 215 buildlisppath=${srcdir}/lisp
 216
 217 # Where to install the other architecture-independent
 218 # data files distributed with Emacs (like the tutorial,
 219 # the cookie recipes and the Zippy database). This path
 220 # usually contains the Emacs version number, so the data
 221 # files for multiple versions of Emacs may be installed
 222 # at once.
 223 etcdir=@etcdir@
 224
 225 # Where to put executables to be run by Emacs rather than
 226 # the user.  This path usually includes the Emacs version
 227 # and configuration name, so that multiple configurations
 228 # for multiple versions of Emacs may be installed at
 229 # once.
 230 archlibdir=@archlibdir@
 231
 232 # Where to put the docstring file.
 233 docdir=@docdir@
 234
 235 # Where to install Emacs game score files.
 236 gamedir=@gamedir@
 237
 238 # ==================== Utility Programs for the Build ====================
 239
 240 # Allow the user to specify the install program.
 241 INSTALL = @INSTALL@
 242 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 243 INSTALL_DATA = @INSTALL_DATA@
 244 INSTALL_INFO = @INSTALL_INFO@
 245 # By default, we uphold the dignity of our programs.
 246 INSTALL_STRIP =
 247
 248 # We use gzip to compress installed .el files.
 249 GZIP_PROG = @GZIP_PROG@
 250
 251 # ============================= Targets ==============================
 252
 253 # Program name transformation.
 254 TRANSFORM = @program_transform_name@
 255
 256 # What emacs should be called when installed.
 257 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
 258 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
 259
 260 # Subdirectories to make recursively.  `lisp' is not included
 261 # because the compiled lisp files are part of the distribution.
 262 # leim is not included because it needs special handling.
 263 SUBDIR = lib-src src
 264
 265 # The makefiles of the directories in $SUBDIR.
 266 SUBDIR_MAKEFILES = lib-src/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispref/Makefile doc/lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile
 267
 268 # Subdirectories to install, and where they'll go.
 269 # lib-src's makefile knows how to install it, so we don't do that here.
 270 # leim's makefile also knows how to install it, so we don't do that here.
 271 # When installing the info files, we need to do special things to
 272 # avoid nuking an existing dir file, so we don't do that here;
 273 # instead, we have written out explicit code in the `install' targets.
 274 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 275 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
 276
 277 all: ${SUBDIR} leim
 278
 279 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
 280
 281 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 282 epaths-force: FRC
 283         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 284           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 285           x_default_search_path=`echo ${x_default_search_path}`; \
 286           gamedir=`echo ${gamedir}`; \
 287           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 288           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";'      \
 289           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 290           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 291           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 292           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 293           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 294           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 295           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 296           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
 297           -e 's;/[*] *arch-tag:.*;/*;') &&              \
 298         ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
 299
 300 # For parallel make, src should be built before leim.
 301 # "export PARALLEL=0" is for SGI's Make, to prevent it from
 302 # running more than 1 process in the leim directory, especially for
 303 # the $TIT files there.
 304 leim:   src ${SUBDIR_MAKEFILES} FRC
 305         (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
 306           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 307           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
 308
 309 src:    lib-src FRC
 310
 311 lib-src: FRC src/config.stamp
 312
 313 .RECURSIVE: ${SUBDIR} leim
 314
 315 ${SUBDIR}: maybe_bootstrap ${SUBDIR_MAKEFILES} FRC
 316         cd $@; $(MAKE) all $(MFLAGS) \
 317           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 318           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 319
 320 blessmail: ${SUBDIR_MAKEFILES} src FRC
 321         cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
 322           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 323
 324 Makefile: $(srcdir)/Makefile.in config.status
 325         ./config.status
 326
 327 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 328         ./config.status --recheck
 329
 330 AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/m4/getopt.m4
 331
 332 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 333         cd ${srcdir} && autoconf
 334
 335 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 336         @true
 337 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 338         cd ${srcdir} && autoheader
 339         rm -f $(srcdir)/src/stamp-h.in
 340         echo timestamp > $(srcdir)/src/stamp-h.in
 341
 342 src/Makefile: $(srcdir)/src/Makefile.in config.status
 343         ./config.status
 344
 345 src/config.stamp: $(srcdir)/src/config.in config.status
 346         ./config.status
 347         touch src/config.stamp
 348
 349 lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status
 350         ./config.status
 351
 352 doc/emacs/Makefile: $(srcdir)/doc/emacs/Makefile.in config.status
 353         ./config.status
 354
 355 doc/misc/Makefile: $(srcdir)/doc/misc/Makefile.in config.status
 356         ./config.status
 357
 358 doc/lispref/Makefile: $(srcdir)/doc/lispref/Makefile.in config.status
 359         ./config.status
 360
 361 doc/lispintro/Makefile: $(srcdir)/doc/lispintro/Makefile.in config.status
 362         ./config.status
 363
 364 oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status
 365         ./config.status
 366
 367 lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status
 368         ./config.status
 369
 370 leim/Makefile: $(srcdir)/leim/Makefile.in config.status
 371         ./config.status
 372
 373 # ==================== Installation ====================
 374
 375 ## If we let lib-src do its own installation, that means we
 376 ## don't have to duplicate the list of utilities to install in
 377 ## this Makefile as well.
 378
 379 ## On AIX, use tar xBf.
 380 ## On Xenix, use tar xpf.
 381
 382 .PHONY: install mkdir
 383
 384 ## We delete each directory in ${COPYDESTS} before we copy into it;
 385 ## that way, we can reinstall over directories that have been put in
 386 ## place with their files read-only (perhaps because they are checked
 387 ## into RCS).  In order to make this safe, we make sure that the
 388 ## source exists and is distinct from the destination.
 389 ### We do install-arch-indep first because
 390 ### the executable needs the Lisp files and DOC file to work properly.
 391 install: all install-arch-indep install-arch-dep install-leim blessmail
 392         @true
 393
 394 ### Install the executables that were compiled specifically for this machine.
 395 ### It would be nice to do something for a parallel make
 396 ### to ensure that install-arch-indep finishes before this starts.
 397 install-arch-dep: mkdir
 398         (cd lib-src; \
 399           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 400             exec_prefix=${exec_prefix} bindir=${bindir} \
 401             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 402             INSTALL_STRIP=${INSTALL_STRIP})
 403         ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
 404         -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
 405         rm -f $(DESTDIR)${bindir}/$(EMACS)
 406         -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
 407         -unset CDPATH; \
 408         for f in `cd lib-src && echo fns-*.el`; do \
 409           if test -r lib-src/$$f ; then \
 410             ${INSTALL_DATA} lib-src/$$f $(DESTDIR)${archlibdir}/$$f; \
 411           else true; fi ; \
 412         done
 413         if test "${carbon_appdir}" != ""; then \
 414           umask 022; mkdir -p $(DESTDIR)${carbon_appdir}/Emacs.app; \
 415           (cd mac/Emacs.app; (tar -chf - . | \
 416                 (cd $(DESTDIR)${carbon_appdir}/Emacs.app; umask 022; tar -xvf - \
 417                         && cat > /dev/null))) || exit 1; \
 418         fi
 419
 420 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 421 ## Needs to be the user running install, so configure can't set it.
 422 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 423           `id -un 2> /dev/null`; do \
 424           [ -n "$${installuser}" ] && break ; \
 425         done
 426
 427 ### Install the files that are machine-independent.
 428 ### Most of them come straight from the distribution;
 429 ### the exception is the DOC-* files, which are copied
 430 ### from the build directory.
 431
 432 ## Note that we copy DOC* and then delete DOC
 433 ## as a workaround for a bug in tar on Ultrix 4.2.
 434
 435 ## We install only the relevant DOC file if possible
 436 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
 437
 438 ## If people complain about the h flag in tar command, take that out.
 439 ## That flag is also used in leim/Makefile.in
 440
 441 ## Note that the Makefiles in the etc directory are potentially useful
 442 ## in an installed Emacs, so should not be excluded.
 443
 444 install-arch-indep: mkdir info install-etc
 445         -set ${COPYDESTS} ; \
 446         unset CDPATH; \
 447         for dir in ${COPYDIR} ; do \
 448           if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
 449             rm -rf $$1 ; \
 450           fi ; \
 451           shift ; \
 452         done
 453         -set ${COPYDESTS} ; \
 454         mkdir ${COPYDESTS} ; \
 455         chmod ugo+rx ${COPYDESTS} ; \
 456         unset CDPATH; \
 457         $(set_installuser); \
 458         for dir in ${COPYDIR} ; do \
 459           dest=$$1 ; shift ; \
 460           [ -d $${dir} ] \
 461           && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
 462           && (echo "Copying $${dir} to $${dest}..." ; \
 463               (cd $${dir}; tar -chf - . ) \
 464                 | (cd $${dest}; umask 022; \
 465                    tar -xvf - && cat > /dev/null) || exit 1; \
 466               find $${dest} -exec chown $${installuser} {} ';' ;\
 467               for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \
 468                 chmod a+rx $${subdir} ; \
 469                 rm -rf $${subdir}/RCS ; \
 470                 rm -rf $${subdir}/CVS ; \
 471                 rm -f  $${subdir}/.cvsignore ; \
 472                 rm -f  $${subdir}/.arch-inventory ; \
 473                 rm -f  $${subdir}/\#* ; \
 474                 rm -f  $${subdir}/.\#* ; \
 475                 rm -f  $${subdir}/*~ ; \
 476                 rm -f  $${subdir}/*.orig ; \
 477                 [ "$${dir}" != "${srcdir}/etc" ] && \
 478                         rm -f  $${subdir}/[mM]akefile* ; \
 479                 rm -f  $${subdir}/ChangeLog* ; \
 480                 rm -f  $${subdir}/dired.todo ; \
 481               done) ; \
 482         done
 483         -rm -f $(DESTDIR)${lispdir}/subdirs.el
 484         $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
 485         if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
 486         then true; \
 487         else \
 488           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 489            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 490             > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
 491         fi
 492         chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
 493         -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
 494         then true; \
 495         else \
 496           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 497            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 498             > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
 499         fi
 500         -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
 501         -unset CDPATH; \
 502         if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
 503         then \
 504            fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
 505            if [ -f "./etc/DOC-$${fullversion}" ]; \
 506            then \
 507              docfile="DOC-$${fullversion}"; \
 508            else \
 509              docfile="DOC-${version}*"; \
 510            fi; \
 511            echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
 512            (cd ./etc; tar -chf - $${docfile}) \
 513              |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 514            (cd $(DESTDIR)$(docdir); \
 515             $(set_installuser); \
 516             chown $${installuser} DOC*; chmod a+r DOC*; \
 517             if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
 518         else true; fi
 519         -unset CDPATH; \
 520         if [ -r ./lisp ] \
 521            && [ -r ./lisp/simple.el ] \
 522            && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \
 523            && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
 524         then \
 525            echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \
 526            (cd lisp; tar -chf - *.el *.elc) \
 527              |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 528            (cd $(DESTDIR)${lispdir}; \
 529             $(set_installuser); \
 530             find . -exec chown $${installuser} {} ';') ; \
 531         else true; fi
 532         -unset CDPATH; \
 533         if [ -n "${GZIP_PROG}" ]; \
 534         then \
 535            echo "Compressing *.el ..." ; \
 536            (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
 537                 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
 538             done) \
 539         else true; fi
 540         -unset CDPATH; \
 541         thisdir=`/bin/pwd`; \
 542         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 543         then \
 544           (cd $(DESTDIR)${infodir};  \
 545            if [ -f dir ]; then true; \
 546            else \
 547              (cd $${thisdir}; \
 548               ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
 549               chmod a+r $(DESTDIR)${infodir}/dir); \
 550            fi; \
 551            cd ${srcdir}/info ; \
 552            for elt in $(INFO_FILES); do \
 553               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 554                 ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \
 555                 chmod a+r $(DESTDIR)${infodir}/$$f; \
 556               done; \
 557            done); \
 558         else true; fi
 559         -unset CDPATH; \
 560         thisdir=`/bin/pwd`; \
 561         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 562         then \
 563           for elt in $(INFO_FILES); do \
 564             (cd $${thisdir}; \
 565              ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 566           done; \
 567         else true; fi
 568         -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} $(DESTDIR)${datadir}/emacs/site-lisp ${COPYDESTS} $(DESTDIR)${infodir}
 569         thisdir=`/bin/pwd`; \
 570         cd ${mansrcdir}; \
 571         for page in emacs emacsclient etags ctags ; do \
 572           (cd $${thisdir}; \
 573            ${INSTALL_DATA} ${mansrcdir}/$${page}.1 $(DESTDIR)${man1dir}/$${page}${manext}; \
 574            chmod a+r $(DESTDIR)${man1dir}/$${page}${manext}); \
 575         done
 576
 577 ## Install those items from etc/ that need to end up elsewhere.
 578 install-etc: mkdir
 579         ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
 580           $(DESTDIR)${desktopdir}/emacs.desktop
 581         for icon in $(iconsrcdir)/*/*x*/apps/*.* \
 582           $(iconsrcdir)/*/scalable/apps/*.*; do \
 583           if [ -r $${icon} ]; then \
 584             iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
 585             ${INSTALL_DATA} $${icon} $${iicon} ; \
 586           fi ; \
 587         done
 588
 589 ### Install LEIM files.  Although they are machine-independent, we
 590 ### have separate target here instead of including it in
 591 ### `install-arch-indep'.  People who extracted LEIM files after they
 592 ### insalled Emacs itself can install only LEIM files by this target.
 593 install-leim: leim/Makefile mkdir
 594         cd leim; $(MAKE) install
 595
 596 ### Build Emacs and install it, stripping binaries while installing them.
 597 install-strip:
 598         $(MAKE) INSTALL_STRIP=-s install
 599
 600 ### Build all the directories we're going to install Emacs in.  Since
 601 ### we may be creating several layers of directories (for example,
 602 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
 603 ### instead of mkdir.  Not all systems' mkdir programs have the `-p' flag.
 604 mkdir: FRC
 605         if [ -d $(DESTDIR)${datadir} ]; then true; else \
 606           $(srcdir)/mkinstalldirs $(DESTDIR)${datadir}; \
 607           chmod a+r $(DESTDIR)${datadir};\
 608         fi
 609         icondirs= ; \
 610         for dir in $(iconsrcdir)/*/*x*/apps $(iconsrcdir)/*/scalable/apps; do \
 611           if [ -d $${dir} ]; then \
 612             icondirs="$${icondirs} $${dir}" ; \
 613           fi ; \
 614         done ; \
 615         icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
 616         $(srcdir)/mkinstalldirs ${COPYDESTS} $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
 617           $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
 618           $(DESTDIR)${datadir}/emacs/site-lisp \
 619           $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
 620           $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
 621           $(DESTDIR)${desktopdir} $${icondirs}
 622
 623 ### Delete all the installed files that the `install' target would
 624 ### create (but not the noninstalled files such as `make all' would
 625 ### create).
 626 ###
 627 ### Don't delete the lisp and etc directories if they're in the source tree.
 628 uninstall:
 629         (cd lib-src;                                    \
 630          $(MAKE) $(MFLAGS) uninstall                    \
 631             prefix=${prefix} exec_prefix=${exec_prefix} \
 632             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
 633         -unset CDPATH; \
 634         for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do        \
 635           if [ -d $${dir} ]; then                       \
 636             case `(cd $${dir} ; /bin/pwd)` in           \
 637               `(cd ${srcdir} ; /bin/pwd)`* ) ;;         \
 638               * ) rm -rf $${dir} ;;                     \
 639             esac ;                                      \
 640             case $${dir} in                             \
 641               $(DESTDIR)${datadir}/emacs/${version}/* )         \
 642                 rm -rf $(DESTDIR)${datadir}/emacs/${version}    \
 643               ;;                                        \
 644             esac ;                                      \
 645           fi ;                                          \
 646         done
 647         (cd $(DESTDIR)${archlibdir} && rm -f fns-*)
 648         -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
 649         (cd $(DESTDIR)${infodir} && \
 650           for elt in $(INFO_FILES); do \
 651             $(INSTALL_INFO) --remove --info-dir=. $$elt; \
 652             for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 653               rm -f $$f; \
 654             done; \
 655           done;)
 656         (cd $(DESTDIR)${man1dir}  && rm -f emacs${manext} emacsclient${manext} etags${manext} ctags${manext})
 657         (cd $(DESTDIR)${bindir}  && rm -f $(EMACSFULL) $(EMACS))
 658
 659
 660 FRC:
 661
 662 # ==================== Cleaning up and miscellanea ====================
 663
 664 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
 665
 666 ### `mostlyclean'
 667 ###      Like `clean', but may refrain from deleting a few files that people
 668 ###      normally don't want to recompile.  For example, the `mostlyclean'
 669 ###      target for GCC does not delete `libgcc.a', because recompiling it
 670 ###      is rarely necessary and takes a lot of time.
 671 mostlyclean: FRC
 672         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 673         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 674         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 675         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 676         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) mostlyclean)
 677         -(cd doc/misc &&   $(MAKE) $(MFLAGS) mostlyclean)
 678         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) mostlyclean)
 679         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)
 680         (cd leim;     $(MAKE) $(MFLAGS) mostlyclean)
 681
 682 ### `clean'
 683 ###      Delete all files from the current directory that are normally
 684 ###      created by building the program.  Don't delete the files that
 685 ###      record the configuration.  Also preserve files that could be made
 686 ###      by building, but normally aren't because the distribution comes
 687 ###      with them.
 688 ###
 689 ###      Delete `.dvi' files here if they are not part of the distribution.
 690 clean: FRC
 691         (cd src;      $(MAKE) $(MFLAGS) clean)
 692         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 693         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 694         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 695         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 696         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 697         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 698         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 699         (cd leim;     $(MAKE) $(MFLAGS) clean)
 700
 701 ### `distclean'
 702 ###      Delete all files from the current directory that are created by
 703 ###      configuring or building the program.  If you have unpacked the
 704 ###      source and built the program without creating any other files,
 705 ###      `make distclean' should leave only the files that were in the
 706 ###      distribution.
 707 top_distclean=\
 708         rm -f config.status config.cache config.log ; \
 709         rm -f Makefile ${SUBDIR_MAKEFILES} ; \
 710         if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi
 711 distclean: FRC
 712         (cd src;      $(MAKE) $(MFLAGS) distclean)
 713         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 714         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 715         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 716         (cd doc/emacs &&    $(MAKE) $(MFLAGS) distclean)
 717         (cd doc/misc &&    $(MAKE) $(MFLAGS) distclean)
 718         (cd doc/lispref &&    $(MAKE) $(MFLAGS) distclean)
 719         (cd doc/lispintro &&    $(MAKE) $(MFLAGS) distclean)
 720         (cd leim;     $(MAKE) $(MFLAGS) distclean)
 721         (cd lisp;     $(MAKE) $(MFLAGS) distclean)
 722         ${top_distclean}
 723
 724 ### `maintainer-clean'
 725 ###      Delete everything from the current directory that can be
 726 ###      reconstructed with this Makefile.  This typically includes
 727 ###      everything deleted by distclean, plus more: C source files
 728 ###      produced by Bison, tags tables, info files, and so on.
 729 ###
 730 ###      One exception, however: `make maintainer-clean' should not delete
 731 ###      `configure' even if `configure' can be remade using a rule in the
 732 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 733 ###      anything that needs to exist in order to run `configure' and then
 734 ###      begin to build the program.
 735 maintainer-clean: FRC
 736         (cd src;      $(MAKE) $(MFLAGS) maintainer-clean)
 737         (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
 738         (cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)
 739         (cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)
 740         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) maintainer-clean)
 741         -(cd doc/misc &&   $(MAKE) $(MFLAGS) maintainer-clean)
 742         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)
 743         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)
 744         (cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)
 745         (cd lisp;     $(MAKE) $(MFLAGS) maintainer-clean)
 746         ${top_distclean}
 747
 748 ### This doesn't actually appear in the coding standards, but Karl
 749 ### says GCC supports it, and that's where the configuration part of
 750 ### the coding standards seem to come from.  It's like distclean, but
 751 ### it deletes backup and autosave files too.
 752 extraclean:
 753         for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 754         ${top_distclean}
 755         -rm -f config-tmp-*
 756         -rm -f *~ \#*
 757
 758 # The src subdir knows how to do the right thing
 759 # even when the build directory and source dir are different.
 760 TAGS tags: lib-src src
 761         cd src; $(MAKE) tags
 762
 763 check:
 764         @echo "We don't have any tests for GNU Emacs yet."
 765
 766 dist:
 767         cd ${srcdir}; ./make-dist
 768
 769 .PHONY: info dvi dist check html
 770 force-info:
 771 # Note that man/Makefile knows how to
 772 # put the info files in $(srcdir),
 773 # so we can do ok running make in the build dir.
 774 info: force-info
 775         -(cd doc/emacs; $(MAKE) $(MFLAGS) info)
 776         -(cd doc/misc; $(MAKE) $(MFLAGS) info)
 777         -(cd doc/lispref; $(MAKE) $(MFLAGS) info)
 778         -(cd doc/lispintro; $(MAKE) $(MFLAGS) info)
 779
 780 # The info/dir file must be updated by hand when new manuals are added.
 781 check-info-dir: info
 782         cd info ; \
 783         missing= ; \
 784         for file in *; do \
 785           test -f "$${file}" || continue ; \
 786           case $${file} in \
 787             *-[0-9]*|COPYING|dir) continue ;; \
 788           esac ; \
 789           grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
 790         done ; \
 791         if test -n "$${missing}"; then \
 792           echo "Missing info/dir entries: $${missing}" ; \
 793           exit 1 ; \
 794         fi ; \
 795         echo "info/dir is OK"
 796
 797 dvi:
 798         (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
 799         (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
 800         (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
 801         (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
 802
 803 #### Bootstrapping.
 804
 805 ### This is meant for Emacs maintainers only.  It first cleans the
 806 ### lisp subdirectory, removing all compiled Lisp files.  Then a
 807 ### special emacs executable is built from Lisp sources, which is then
 808 ### used to compile Lisp files.  The last step is a "normal" make.
 809
 810 .PHONY: bootstrap
 811 .PHONY: bootstrap-build
 812 .PHONY: bootfast
 813 .PHONY: maybe_bootstrap
 814
 815 maybe_bootstrap:
 816         @bar="`echo $(srcdir)/lisp/*.elc`"; \
 817         if [ \( "$$bar" = '$(srcdir)/lisp/*.elc' \) -o \( "$$bar" = '' \) ]; then \
 818           echo "Your tree does not include the compiled Lisp files."; \
 819           echo "You need to do \`make bootstrap' to build Emacs."; \
 820           exit 1;\
 821         fi
 822
 823 bootstrap: bootstrap-clean-before FRC
 824         $(MAKE) $(MFLAGS) info bootstrap-build
 825
 826 bootfast: bootstrap-clean-before-fast FRC
 827         $(MAKE) $(MFLAGS) info bootstrap-build
 828
 829 bootstrap-build: FRC
 830         (cd lisp; $(MAKE) $(MFLAGS) bootstrap-prepare)
 831         (cd src; $(MAKE) $(MFLAGS) bootstrap)
 832         (cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs${EXEEXT})
 833         (cd src; $(MAKE) $(MFLAGS) mostlyclean)
 834         $(MAKE) $(MFLAGS) all
 835         (cd lisp; $(MAKE) $(MFLAGS) bootstrap-after)
 836
 837 ### Used for `bootstrap' to avoid deleting existing dumped Emacs executables.
 838 bootstrap-clean-before: bootstrap-clean-before-fast FRC
 839         (cd lisp;     $(MAKE) $(MFLAGS) bootstrap-clean)
 840         (cd leim;     $(MAKE) $(MFLAGS) bootstrap-clean)
 841
 842 ### Used for `bootfast' to avoid deleting existing dumped Emacs executables
 843 ### and compiled .elc files.
 844 bootstrap-clean-before-fast: FRC
 845         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 846         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 847         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 848         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 849         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 850         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 851         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 852         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 853         (cd leim;     $(MAKE) $(MFLAGS) clean)
 854
 855 .PHONY: check-declare
 856
 857 check-declare:
 858         @if [ ! -e $(srcdir)/src/emacs ]; then \
 859           echo "You must build Emacs to use this command"; \
 860           exit 1; \
 861         fi
 862         (cd leim; $(MAKE) $(MFLAGS) $@)
 863         (cd lisp; $(MAKE) $(MFLAGS) $@)