Add arch tagline
[emacs.git] / Makefile.in
blobfb4061b50ffea64f97bbae521f4c94e1858bf81e
1 # DIST: This is the distribution Makefile for Emacs. configure can
2 # DIST: make most of the changes to this file you might want, so try
3 # DIST: that first.
5 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
6 # 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
7 # Free Software Foundation, Inc.
9 # This file is part of GNU Emacs.
11 # GNU Emacs is free software; you can redistribute it and/or modify
12 # it under the terms of the GNU General Public License as published by
13 # the Free Software Foundation; either version 3, or (at your option)
14 # any later version.
16 # GNU Emacs is distributed in the hope that it will be useful,
17 # but WITHOUT ANY WARRANTY; without even the implied warranty of
18 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 # GNU General Public License for more details.
21 # You should have received a copy of the GNU General Public License
22 # along with GNU Emacs; see the file COPYING. If not, write to
23 # the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
24 # Boston, MA 02110-1301, USA.
26 # make all to compile and build Emacs.
27 # make install to install it.
28 # make TAGS to update tags tables.
30 # make clean or make mostlyclean
31 # Delete all files from the current directory that are normally
32 # created by building the program. Don't delete the files that
33 # record the configuration. Also preserve files that could be made
34 # by building, but normally aren't because the distribution comes
35 # with them.
37 # Delete `.dvi' files here if they are not part of the distribution.
39 # make distclean
40 # Delete all files from the current directory that are created by
41 # configuring or building the program. If you have unpacked the
42 # source and built the program without creating any other files,
43 # `make distclean' should leave only the files that were in the
44 # distribution.
46 # make maintainer-clean
47 # Delete everything from the current directory that can be
48 # reconstructed with this Makefile. This typically includes
49 # everything deleted by distclean, plus more: .elc files,
50 # C source files produced by Bison, tags tables, info files,
51 # and so on.
53 # make extraclean
54 # Still more severe - delete backup and autosave files, too.
56 # make bootstrap
57 # Recompiles all the Emacs Lisp files using the latest source,
58 # then rebuilds Emacs.
60 # make bootfast
61 # Recompiles changed Emacs Lisp files using the latest C source,
62 # then rebuilds Emacs. This is faster than `make bootstrap'
63 # but once in a while an old .elc file can cause trouble.
65 SHELL = /bin/sh
67 # This may not work with certain non-GNU make's. It only matters when
68 # inheriting a CDPATH not starting with the current directory.
69 CDPATH=
71 # If Make doesn't predefine MAKE, set it here.
72 @SET_MAKE@
74 # ==================== Things `configure' Might Edit ====================
76 CC=@CC@
77 CPP=@CPP@
78 C_SWITCH_SYSTEM=@c_switch_system@
79 ALLOCA=@ALLOCA@
80 LN_S=@LN_S@
81 CFLAGS=@CFLAGS@
82 LDFLAGS=@LDFLAGS@
83 CPPFLAGS=@CPPFLAGS@
84 C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
85 LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
86 EXEEXT=@EXEEXT@
88 ### These help us choose version- and architecture-specific directories
89 ### to install files in.
91 ### This should be the number of the Emacs version we're building,
92 ### like `18.59' or `19.0'.
93 version=@version@
95 ### This should be the name of the configuration we're building Emacs
96 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
97 configuration=@configuration@
99 # ==================== Where To Install Things ====================
101 # The default location for installation. Everything is placed in
102 # subdirectories of this directory. The default values for many of
103 # the variables below are expressed in terms of this one, so you may
104 # not need to change them. This defaults to /usr/local.
105 prefix=@prefix@
107 # Like `prefix', but used for architecture-specific files.
108 exec_prefix=@exec_prefix@
110 # Where to install Emacs and other binaries that people will want to
111 # run directly (like etags).
112 bindir=@bindir@
114 # The root of the directory tree for read-only architecture-independent
115 # data files. ${datadir}, ${infodir} and ${mandir} are based on this.
116 datarootdir=@datarootdir@
118 # Where to install architecture-independent data files. ${lispdir}
119 # and ${etcdir} are subdirectories of this.
120 datadir=@datadir@
122 # Where to install and expect the files that Emacs modifies as it
123 # runs. These files are all architecture-independent.
124 # Right now, this is not used.
125 sharedstatedir=@sharedstatedir@
127 # Where to install and expect executable files to be run by Emacs
128 # rather than directly by users, and other architecture-dependent
129 # data. ${archlibdir} is a subdirectory of this.
130 libexecdir=@libexecdir@
132 # Where to install Emacs's man pages, and what extension they should have.
133 mandir=@mandir@
134 manext=.1
135 man1dir=$(mandir)/man1
137 # Where to install and expect the info files describing Emacs. In the
138 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
139 # since there are now many packages documented with the texinfo
140 # system, it is inappropriate to imply that it is part of Emacs.
141 infodir=@infodir@
142 INFO_FILES=ada-mode autotype calc ccmode cl dbus dired-x ebrowse ediff \
143 efaq eintr elisp emacs emacs-mime erc eshell eudc flymake \
144 forms gnus idlwave info message mh-e newsticker nxml-mode \
145 org pcl-cvs pgg rcirc reftex remember sc ses sieve speedbar \
146 tramp vip viper widget woman smtpmail url
148 # Directory for local state files for all programs.
149 localstatedir=@localstatedir@
151 # Where to look for bitmap files.
152 bitmapdir=@bitmapdir@
154 # Where to find the source code. The source code for Emacs's C kernel is
155 # expected to be in ${srcdir}/src, and the source code for Emacs's
156 # utility programs is expected to be in ${srcdir}/lib-src. This is
157 # set by the configure script's `--srcdir' option.
159 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
160 srcdir=@srcdir@
162 # Where the manpage source files are kept.
163 mansrcdir=$(srcdir)/doc/man
165 # Tell make where to find source files; this is needed for the makefiles.
166 VPATH=@srcdir@
168 # Where to find the application default.
169 x_default_search_path=@x_default_search_path@
171 # Location to install Emacs.app on Mac OS X
172 carbon_appdir=@carbon_appdir@
174 # Where the etc/emacs.desktop file is to be installed.
175 desktopdir=$(datarootdir)/applications
177 # Where the etc/images/icons/hicolor directory is to be installed.
178 icondir=$(datarootdir)/icons
180 # ==================== Emacs-specific directories ====================
182 # These variables hold the values Emacs will actually use. They are
183 # based on the values of the standard Make variables above.
185 # Where to install the lisp files distributed with
186 # Emacs. This includes the Emacs version, so that the
187 # lisp files for different versions of Emacs will install
188 # themselves in separate directories.
189 lispdir=@lispdir@
191 # Directories Emacs should search for lisp files specific
192 # to this site (i.e. customizations), before consulting
193 # ${lispdir}. This should be a colon-separated list of
194 # directories.
195 locallisppath=@locallisppath@
197 # Where Emacs will search to find its lisp files. Before
198 # changing this, check to see if your purpose wouldn't
199 # better be served by changing locallisppath. This
200 # should be a colon-separated list of directories.
201 lisppath=@lisppath@
203 # Where Emacs will search for its lisp files while
204 # building. This is only used during the process of
205 # compiling Emacs, to help Emacs find its lisp files
206 # before they've been installed in their final location.
207 # It's usually identical to lisppath, except that
208 # it does not include locallisppath, and the
209 # entry for the directory containing the installed lisp
210 # files has been replaced with ../lisp. This should be a
211 # colon-separated list of directories.
212 buildlisppath=${srcdir}/lisp
214 # Where to install the other architecture-independent
215 # data files distributed with Emacs (like the tutorial,
216 # the cookie recipes and the Zippy database). This path
217 # usually contains the Emacs version number, so the data
218 # files for multiple versions of Emacs may be installed
219 # at once.
220 etcdir=@etcdir@
222 # Where to put executables to be run by Emacs rather than
223 # the user. This path usually includes the Emacs version
224 # and configuration name, so that multiple configurations
225 # for multiple versions of Emacs may be installed at
226 # once.
227 archlibdir=@archlibdir@
229 # Where to put the docstring file.
230 docdir=@docdir@
232 # Where to install Emacs game score files.
233 gamedir=@gamedir@
235 # ==================== Utility Programs for the Build ====================
237 # Allow the user to specify the install program.
238 INSTALL = @INSTALL@
239 INSTALL_PROGRAM = @INSTALL_PROGRAM@
240 INSTALL_DATA = @INSTALL_DATA@
241 INSTALL_INFO = @INSTALL_INFO@
242 # By default, we uphold the dignity of our programs.
243 INSTALL_STRIP =
245 # We use gzip to compress installed .el files.
246 GZIP_PROG = @GZIP_PROG@
248 # ============================= Targets ==============================
250 # Program name transformation.
251 TRANSFORM = @program_transform_name@
253 # What emacs should be called when installed.
254 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
255 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
257 # Subdirectories to make recursively. `lisp' is not included
258 # because the compiled lisp files are part of the distribution.
259 # leim is not included because it needs special handling.
260 SUBDIR = lib-src src
262 # The makefiles of the directories in $SUBDIR.
263 SUBDIR_MAKEFILES = lib-src/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispref/Makefile doc/lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile
265 # Subdirectories to install, and where they'll go.
266 # lib-src's makefile knows how to install it, so we don't do that here.
267 # leim's makefile also knows how to install it, so we don't do that here.
268 # When installing the info files, we need to do special things to
269 # avoid nuking an existing dir file, so we don't do that here;
270 # instead, we have written out explicit code in the `install' targets.
271 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
272 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
274 all: ${SUBDIR} leim
276 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
278 # Generate epaths.h from epaths.in. This target is invoked by `configure'.
279 epaths-force: FRC
280 @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
281 buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
282 x_default_search_path=`echo ${x_default_search_path}`; \
283 gamedir=`echo ${gamedir}`; \
284 sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
285 -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";' \
286 -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
287 -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
288 -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
289 -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
290 -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
291 -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
292 -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
293 -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
294 -e 's;/[*] *arch-tag:.*;/*;') && \
295 ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
297 # For parallel make, src should be built before leim.
298 # "export PARALLEL=0" is for SGI's Make, to prevent it from
299 # running more than 1 process in the leim directory, especially for
300 # the $TIT files there.
301 leim: src ${SUBDIR_MAKEFILES} FRC
302 (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
303 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
304 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
306 src: lib-src FRC
308 lib-src: FRC src/config.stamp
310 .RECURSIVE: ${SUBDIR} leim
312 ${SUBDIR}: maybe_bootstrap ${SUBDIR_MAKEFILES} FRC
313 cd $@; $(MAKE) all $(MFLAGS) \
314 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
315 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
317 blessmail: ${SUBDIR_MAKEFILES} src FRC
318 cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
319 MAKE='${MAKE}' archlibdir='$(archlibdir)'
321 Makefile: $(srcdir)/Makefile.in config.status
322 ./config.status
324 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
325 ./config.status --recheck
327 AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/m4/getopt.m4
329 $(srcdir)/configure: $(AUTOCONF_INPUTS)
330 cd ${srcdir} && autoconf
332 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
333 @true
334 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
335 cd ${srcdir} && autoheader
336 rm -f $(srcdir)/src/stamp-h.in
337 echo timestamp > $(srcdir)/src/stamp-h.in
339 src/Makefile: $(srcdir)/src/Makefile.in config.status
340 ./config.status
342 src/config.stamp: $(srcdir)/src/config.in config.status
343 ./config.status
344 touch src/config.stamp
346 lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status
347 ./config.status
349 doc/emacs/Makefile: $(srcdir)/doc/emacs/Makefile.in config.status
350 ./config.status
352 doc/misc/Makefile: $(srcdir)/doc/misc/Makefile.in config.status
353 ./config.status
355 doc/lispref/Makefile: $(srcdir)/doc/lispref/Makefile.in config.status
356 ./config.status
358 doc/lispintro/Makefile: $(srcdir)/doc/lispintro/Makefile.in config.status
359 ./config.status
361 oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status
362 ./config.status
364 lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status
365 ./config.status
367 leim/Makefile: $(srcdir)/leim/Makefile.in config.status
368 ./config.status
370 # ==================== Installation ====================
372 ## If we let lib-src do its own installation, that means we
373 ## don't have to duplicate the list of utilities to install in
374 ## this Makefile as well.
376 ## On AIX, use tar xBf.
377 ## On Xenix, use tar xpf.
379 .PHONY: install mkdir
381 ## We delete each directory in ${COPYDESTS} before we copy into it;
382 ## that way, we can reinstall over directories that have been put in
383 ## place with their files read-only (perhaps because they are checked
384 ## into RCS). In order to make this safe, we make sure that the
385 ## source exists and is distinct from the destination.
386 ### We do install-arch-indep first because
387 ### the executable needs the Lisp files and DOC file to work properly.
388 install: all install-arch-indep install-arch-dep install-leim blessmail
389 @true
391 ### Install the executables that were compiled specifically for this machine.
392 ### It would be nice to do something for a parallel make
393 ### to ensure that install-arch-indep finishes before this starts.
394 install-arch-dep: mkdir
395 (cd lib-src; \
396 $(MAKE) install $(MFLAGS) prefix=${prefix} \
397 exec_prefix=${exec_prefix} bindir=${bindir} \
398 libexecdir=${libexecdir} archlibdir=${archlibdir} \
399 INSTALL_STRIP=${INSTALL_STRIP})
400 ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
401 -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
402 rm -f $(DESTDIR)${bindir}/$(EMACS)
403 -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
404 -unset CDPATH; \
405 for f in `cd lib-src && echo fns-*.el`; do \
406 if test -r lib-src/$$f ; then \
407 ${INSTALL_DATA} lib-src/$$f $(DESTDIR)${archlibdir}/$$f; \
408 else true; fi ; \
409 done
410 if test "${carbon_appdir}" != ""; then \
411 umask 022; mkdir -p $(DESTDIR)${carbon_appdir}/Emacs.app; \
412 (cd mac/Emacs.app; (tar -chf - . | \
413 (cd $(DESTDIR)${carbon_appdir}/Emacs.app; umask 022; tar -xvf - \
414 && cat > /dev/null))) || exit 1; \
417 ### Install the files that are machine-independent.
418 ### Most of them come straight from the distribution;
419 ### the exception is the DOC-* files, which are copied
420 ### from the build directory.
422 ## Note that we copy DOC* and then delete DOC
423 ## as a workaround for a bug in tar on Ultrix 4.2.
425 ## We install only the relevant DOC file if possible
426 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
428 ## If people complain about the h flag in tar command, take that out.
429 ## That flag is also used in leim/Makefile.in
431 ## Note that the Makefiles in the etc directory are potentially useful
432 ## in an installed Emacs, so should not be excluded.
434 ## installuser:
435 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
436 ## Nuisance because i) it needs to be the user running install, so
437 ## configure can't set it; ii) can't (?) use the result of rule
438 ## commands to set make variables.
439 install-arch-indep: mkdir info install-etc
440 -set ${COPYDESTS} ; \
441 unset CDPATH; \
442 for dir in ${COPYDIR} ; do \
443 if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
444 rm -rf $$1 ; \
445 fi ; \
446 shift ; \
447 done
448 -set ${COPYDESTS} ; \
449 mkdir ${COPYDESTS} ; \
450 chmod ugo+rx ${COPYDESTS} ; \
451 unset CDPATH; \
452 for installuser in $${LOGNAME} $${USERNAME} $${USER} \
453 `id -un 2> /dev/null`; do \
454 [ -n "$${installuser}" ] && break ; \
455 done ; \
456 for dir in ${COPYDIR} ; do \
457 dest=$$1 ; shift ; \
458 [ -d $${dir} ] \
459 && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
460 && (echo "Copying $${dir} to $${dest}..." ; \
461 (cd $${dir}; tar -chf - . ) \
462 | (cd $${dest}; umask 022; \
463 tar -xvf - && cat > /dev/null) || exit 1; \
464 find $${dest} -exec chown $${installuser} {} ';' ;\
465 for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \
466 chmod a+rx $${subdir} ; \
467 rm -rf $${subdir}/RCS ; \
468 rm -rf $${subdir}/CVS ; \
469 rm -f $${subdir}/.cvsignore ; \
470 rm -f $${subdir}/.arch-inventory ; \
471 rm -f $${subdir}/\#* ; \
472 rm -f $${subdir}/.\#* ; \
473 rm -f $${subdir}/*~ ; \
474 rm -f $${subdir}/*.orig ; \
475 [ "$${dir}" != "${srcdir}/etc" ] && \
476 rm -f $${subdir}/[mM]akefile* ; \
477 rm -f $${subdir}/ChangeLog* ; \
478 rm -f $${subdir}/dired.todo ; \
479 done) ; \
480 done
481 -rm -f $(DESTDIR)${lispdir}/subdirs.el
482 $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
483 if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
484 then true; \
485 else \
486 (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
487 echo " (normal-top-level-add-subdirs-to-load-path))") \
488 > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
490 chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
491 -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
492 then true; \
493 else \
494 (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
495 echo " (normal-top-level-add-subdirs-to-load-path))") \
496 > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
498 -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
499 -unset CDPATH; \
500 if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
501 then \
502 fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
503 if [ -f "./etc/DOC-$${fullversion}" ]; \
504 then \
505 docfile="DOC-$${fullversion}"; \
506 else \
507 docfile="DOC-${version}*"; \
508 fi; \
509 echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
510 (cd ./etc; tar -chf - $${docfile}) \
511 |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
512 (cd $(DESTDIR)$(docdir); \
513 for installuser in $${LOGNAME} $${USERNAME} $${USER} \
514 `id -un 2> /dev/null`; do \
515 [ -n "$${installuser}" ] && break ; \
516 done ; \
517 chown $${installuser} DOC*; chmod a+r DOC*; \
518 if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
519 else true; fi
520 -unset CDPATH; \
521 if [ -r ./lisp ] \
522 && [ -r ./lisp/simple.el ] \
523 && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \
524 && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
525 then \
526 echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \
527 (cd lisp; tar -chf - *.el *.elc) \
528 |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
529 (cd $(DESTDIR)${lispdir}; \
530 for installuser in $${LOGNAME} $${USERNAME} $${USER} \
531 `id -un 2> /dev/null`; do \
532 [ -n "$${installuser}" ] && break ; \
533 done ; \
534 find . -exec chown $${installuser} {} ';') ; \
535 else true; fi
536 -unset CDPATH; \
537 if [ -n "${GZIP_PROG}" ]; \
538 then \
539 echo "Compressing *.el ..." ; \
540 (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
541 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
542 done) \
543 else true; fi
544 -unset CDPATH; \
545 thisdir=`/bin/pwd`; \
546 if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
547 then \
548 (cd $(DESTDIR)${infodir}; \
549 if [ -f dir ]; then true; \
550 else \
551 (cd $${thisdir}; \
552 ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
553 chmod a+r $(DESTDIR)${infodir}/dir); \
554 fi; \
555 cd ${srcdir}/info ; \
556 for elt in $(INFO_FILES); do \
557 for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
558 ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \
559 chmod a+r $(DESTDIR)${infodir}/$$f; \
560 done; \
561 done); \
562 else true; fi
563 -unset CDPATH; \
564 thisdir=`/bin/pwd`; \
565 if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
566 then \
567 for elt in $(INFO_FILES); do \
568 (cd $${thisdir}; \
569 ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
570 done; \
571 else true; fi
572 -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} $(DESTDIR)${datadir}/emacs/site-lisp ${COPYDESTS} $(DESTDIR)${infodir}
573 thisdir=`/bin/pwd`; \
574 cd ${mansrcdir}; \
575 for page in emacs emacsclient etags ctags ; do \
576 (cd $${thisdir}; \
577 ${INSTALL_DATA} ${mansrcdir}/$${page}.1 $(DESTDIR)${man1dir}/$${page}${manext}; \
578 chmod a+r $(DESTDIR)${man1dir}/$${page}${manext}); \
579 done
581 ## Install those items from etc/ that need to end up elsewhere.
582 install-etc: mkdir
583 ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
584 $(DESTDIR)${desktopdir}/emacs.desktop
585 for icon in $(srcdir)/etc/images/icons/*/*x*/apps/*.*; do \
586 if [ -r $${icon} ]; then \
587 iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
588 ${INSTALL_DATA} $${icon} $${iicon} ; \
589 fi ; \
590 done
592 ### Install LEIM files. Although they are machine-independent, we
593 ### have separate target here instead of including it in
594 ### `install-arch-indep'. People who extracted LEIM files after they
595 ### insalled Emacs itself can install only LEIM files by this target.
596 install-leim: leim/Makefile mkdir
597 cd leim; $(MAKE) install
599 ### Build Emacs and install it, stripping binaries while installing them.
600 install-strip:
601 $(MAKE) INSTALL_STRIP=-s install
603 ### Build all the directories we're going to install Emacs in. Since
604 ### we may be creating several layers of directories (for example,
605 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
606 ### instead of mkdir. Not all systems' mkdir programs have the `-p' flag.
607 mkdir: FRC
608 if [ -d $(DESTDIR)${datadir} ]; then true; else \
609 $(srcdir)/mkinstalldirs $(DESTDIR)${datadir}; \
610 chmod a+r $(DESTDIR)${datadir};\
612 icondirs= ; \
613 for dir in $(srcdir)/etc/images/icons/*/*x*/apps; do \
614 if [ -d $${dir} ]; then \
615 icondirs="$${icondirs} $${dir}" ; \
616 fi ; \
617 done ; \
618 icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
619 $(srcdir)/mkinstalldirs ${COPYDESTS} $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
620 $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
621 $(DESTDIR)${datadir}/emacs/site-lisp \
622 $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
623 $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
624 $(DESTDIR)${desktopdir} $${icondirs}
626 ### Delete all the installed files that the `install' target would
627 ### create (but not the noninstalled files such as `make all' would
628 ### create).
630 ### Don't delete the lisp and etc directories if they're in the source tree.
631 uninstall:
632 (cd lib-src; \
633 $(MAKE) $(MFLAGS) uninstall \
634 prefix=${prefix} exec_prefix=${exec_prefix} \
635 bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
636 -unset CDPATH; \
637 for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \
638 if [ -d $${dir} ]; then \
639 case `(cd $${dir} ; /bin/pwd)` in \
640 `(cd ${srcdir} ; /bin/pwd)`* ) ;; \
641 * ) rm -rf $${dir} ;; \
642 esac ; \
643 case $${dir} in \
644 $(DESTDIR)${datadir}/emacs/${version}/* ) \
645 rm -rf $(DESTDIR)${datadir}/emacs/${version} \
646 ;; \
647 esac ; \
648 fi ; \
649 done
650 (cd $(DESTDIR)${archlibdir} && rm -f fns-*)
651 -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
652 (cd $(DESTDIR)${infodir} && \
653 for elt in $(INFO_FILES); do \
654 $(INSTALL_INFO) --remove --info-dir=. $$elt; \
655 for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
656 rm -f $$f; \
657 done; \
658 done;)
659 (cd $(DESTDIR)${man1dir} && rm -f emacs${manext} emacsclient${manext} etags${manext} ctags${manext})
660 (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS))
663 FRC:
665 # ==================== Cleaning up and miscellanea ====================
667 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
669 ### `mostlyclean'
670 ### Like `clean', but may refrain from deleting a few files that people
671 ### normally don't want to recompile. For example, the `mostlyclean'
672 ### target for GCC does not delete `libgcc.a', because recompiling it
673 ### is rarely necessary and takes a lot of time.
674 mostlyclean: FRC
675 (cd src; $(MAKE) $(MFLAGS) mostlyclean)
676 (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
677 (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
678 (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
679 -(cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean)
680 -(cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean)
681 -(cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean)
682 -(cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean)
683 (cd leim; $(MAKE) $(MFLAGS) mostlyclean)
685 ### `clean'
686 ### Delete all files from the current directory that are normally
687 ### created by building the program. Don't delete the files that
688 ### record the configuration. Also preserve files that could be made
689 ### by building, but normally aren't because the distribution comes
690 ### with them.
692 ### Delete `.dvi' files here if they are not part of the distribution.
693 clean: FRC
694 (cd src; $(MAKE) $(MFLAGS) clean)
695 (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
696 (cd lwlib; $(MAKE) $(MFLAGS) clean)
697 (cd lib-src; $(MAKE) $(MFLAGS) clean)
698 -(cd doc/emacs && $(MAKE) $(MFLAGS) clean)
699 -(cd doc/misc && $(MAKE) $(MFLAGS) clean)
700 -(cd doc/lispref && $(MAKE) $(MFLAGS) clean)
701 -(cd doc/lispintro && $(MAKE) $(MFLAGS) clean)
702 (cd leim; $(MAKE) $(MFLAGS) clean)
704 ### `distclean'
705 ### Delete all files from the current directory that are created by
706 ### configuring or building the program. If you have unpacked the
707 ### source and built the program without creating any other files,
708 ### `make distclean' should leave only the files that were in the
709 ### distribution.
710 top_distclean=\
711 rm -f config.status config.cache config.log ; \
712 rm -f Makefile ${SUBDIR_MAKEFILES} ; \
713 if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi
714 distclean: FRC
715 (cd src; $(MAKE) $(MFLAGS) distclean)
716 (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
717 (cd lwlib; $(MAKE) $(MFLAGS) distclean)
718 (cd lib-src; $(MAKE) $(MFLAGS) distclean)
719 (cd doc/emacs && $(MAKE) $(MFLAGS) distclean)
720 (cd doc/misc && $(MAKE) $(MFLAGS) distclean)
721 (cd doc/lispref && $(MAKE) $(MFLAGS) distclean)
722 (cd doc/lispintro && $(MAKE) $(MFLAGS) distclean)
723 (cd leim; $(MAKE) $(MFLAGS) distclean)
724 (cd lisp; $(MAKE) $(MFLAGS) distclean)
725 ${top_distclean}
727 ### `maintainer-clean'
728 ### Delete everything from the current directory that can be
729 ### reconstructed with this Makefile. This typically includes
730 ### everything deleted by distclean, plus more: C source files
731 ### produced by Bison, tags tables, info files, and so on.
733 ### One exception, however: `make maintainer-clean' should not delete
734 ### `configure' even if `configure' can be remade using a rule in the
735 ### Makefile. More generally, `make maintainer-clean' should not delete
736 ### anything that needs to exist in order to run `configure' and then
737 ### begin to build the program.
738 maintainer-clean: FRC
739 (cd src; $(MAKE) $(MFLAGS) maintainer-clean)
740 (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
741 (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
742 (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
743 -(cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean)
744 -(cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean)
745 -(cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean)
746 -(cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean)
747 (cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
748 (cd lisp; $(MAKE) $(MFLAGS) maintainer-clean)
749 ${top_distclean}
751 ### This doesn't actually appear in the coding standards, but Karl
752 ### says GCC supports it, and that's where the configuration part of
753 ### the coding standards seem to come from. It's like distclean, but
754 ### it deletes backup and autosave files too.
755 extraclean:
756 for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
757 ${top_distclean}
758 -rm -f config-tmp-*
759 -rm -f *~ \#*
761 # The src subdir knows how to do the right thing
762 # even when the build directory and source dir are different.
763 TAGS tags: lib-src src
764 cd src; $(MAKE) tags
766 check:
767 @echo "We don't have any tests for GNU Emacs yet."
769 dist:
770 cd ${srcdir}; ./make-dist
772 .PHONY: info dvi dist check html
773 force-info:
774 # Note that man/Makefile knows how to
775 # put the info files in $(srcdir),
776 # so we can do ok running make in the build dir.
777 info: force-info
778 -(cd doc/emacs; $(MAKE) $(MFLAGS) info)
779 -(cd doc/misc; $(MAKE) $(MFLAGS) info)
780 -(cd doc/lispref; $(MAKE) $(MFLAGS) info)
781 -(cd doc/lispintro; $(MAKE) $(MFLAGS) info)
782 dvi:
783 (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
784 (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
785 (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
786 (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
788 #### Bootstrapping.
790 ### This is meant for Emacs maintainers only. It first cleans the
791 ### lisp subdirectory, removing all compiled Lisp files. Then a
792 ### special emacs executable is built from Lisp sources, which is then
793 ### used to compile Lisp files. The last step is a "normal" make.
795 .PHONY: bootstrap
796 .PHONY: bootstrap-build
797 .PHONY: bootfast
798 .PHONY: maybe_bootstrap
800 maybe_bootstrap:
801 @bar="`echo $(srcdir)/lisp/*.elc`"; \
802 if [ \( "$$bar" = '$(srcdir)/lisp/*.elc' \) -o \( "$$bar" = '' \) ]; then \
803 echo "Your tree does not include the compiled Lisp files."; \
804 echo "You need to do \`make bootstrap' to build Emacs."; \
805 exit 1;\
808 bootstrap: bootstrap-clean-before FRC
809 $(MAKE) $(MFLAGS) info bootstrap-build
811 bootfast: bootstrap-clean-before-fast FRC
812 $(MAKE) $(MFLAGS) info bootstrap-build
814 bootstrap-build: FRC
815 (cd lisp; $(MAKE) $(MFLAGS) bootstrap-prepare)
816 (cd src; $(MAKE) $(MFLAGS) bootstrap)
817 (cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs${EXEEXT})
818 (cd src; $(MAKE) $(MFLAGS) mostlyclean)
819 $(MAKE) $(MFLAGS) all
820 (cd lisp; $(MAKE) $(MFLAGS) bootstrap-after)
822 ### Used for `bootstrap' to avoid deleting existing dumped Emacs executables.
823 bootstrap-clean-before: bootstrap-clean-before-fast FRC
824 (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean)
825 (cd leim; $(MAKE) $(MFLAGS) bootstrap-clean)
827 ### Used for `bootfast' to avoid deleting existing dumped Emacs executables
828 ### and compiled .elc files.
829 bootstrap-clean-before-fast: FRC
830 (cd src; $(MAKE) $(MFLAGS) mostlyclean)
831 (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
832 (cd lwlib; $(MAKE) $(MFLAGS) clean)
833 (cd lib-src; $(MAKE) $(MFLAGS) clean)
834 -(cd doc/emacs && $(MAKE) $(MFLAGS) clean)
835 -(cd doc/misc && $(MAKE) $(MFLAGS) clean)
836 -(cd doc/lispref && $(MAKE) $(MFLAGS) clean)
837 -(cd doc/lispintro && $(MAKE) $(MFLAGS) clean)
838 (cd leim; $(MAKE) $(MFLAGS) clean)
840 .PHONY: check-declare
842 check-declare:
843 @if [ ! -e $(srcdir)/src/emacs ]; then \
844 echo "You must build Emacs to use this command"; \
845 exit 1; \
847 (cd leim; $(MAKE) $(MFLAGS) $@)
848 (cd lisp; $(MAKE) $(MFLAGS) $@)