1 2001-04-05 Gerd Moellmann <gerd@gnu.org>
3 * Makefile.in (install-arch-indep): Remove .cvsignore files.
5 2001-03-30 Gerd Moellmann <gerd@gnu.org>
7 * Makefile.in (.PHONY): Add for bootstrap targets.
8 (bootstrap-clean): New target.
9 (bootstrap): Use it instead of `clean'.
11 2001-03-29 Eli Zaretskii <a34785@is.elta.co.il>
13 * Makefile.in (SUBDIR): Remove leim.
14 (all, .RECURSIVE, extraclean): Add leim explicitly.
15 (leim): Provide separate rule which exports PARALLEL=0 into the
18 2001-03-20 Gerd Moellmann <gerd@gnu.org>
20 * configure.in (HAVE_XPM): Don't print the result of the check for
21 XpmReturnAllocPixels if we don't have an xpm.h.
23 2001-03-05 Gerd Moellmann <gerd@gnu.org>
27 2001-03-04 Eli Zaretskii <eliz@is.elta.co.il>
29 * config.bat: Update the copyright.
31 2001-02-23 Kenichi Handa <handa@etl.go.jp>
33 * configure.in: Use AC_EGREP_CPP to check if the C preprocessor
34 converts `..' to `. .'. If it converts, set CPP_NEED_TRADITIONAL
35 to `yes'. Later in AC_OUTPUT, check this variable.
37 2001-02-09 Dave Love <fx@gnu.org>
41 2001-02-06 Eli Zaretskii <eliz@is.elta.co.il>
43 * info/dir (Ebrowse): Fix the entry (was missing a dot).
45 2001-02-02 Gerd Moellmann <gerd@gnu.org>
47 * mkinstalldirs (errstatus): Chmod a+rx directories we create.
49 * Makefile.in (uninstall): Ignore exit code of `rm'.
51 * Makefile.in (uninstall): Remove more info files. Remove
52 ${libexecdir}/emacs/${version}. Remove ${archlibdir}/fns-*.
54 2001-01-31 Gerd Moellmann <gerd@gnu.org>
56 * noleim-Makefile.in (extraclean): Add.
58 2001-01-28 Gerd Moellmann <gerd@gnu.org>
60 * Makefile.in (extraclean): Added -f to -rm config-tmp-* to keep
63 2001-01-24 Colin Walters <walters@cis.ohio-state.edu>
65 * Makefile.in (tags): Fix typo.
67 2001-01-13 Kenichi Handa <handa@etl.go.jp>
69 * configure.in: Fix typo in the code setting x_search_path.
71 2001-01-10 Dave Love <fx@gnu.org>
73 * configure.in: Don't reset LIBS at end of -lXmu test. Test for
75 (HAVE_XKBGETKEYBOARD): Fix reporting of result.
76 (HAVE_LIBXP): Remove -lXt from AC_CHECK_LIB.
77 (HAVE_XAW3D, HAVE_XPM, HAVE_JPEG, HAVE_PNG, HAVE_TIFF, HAVE_GIF):
78 Don't frob CFLAGS. Remove extra X libs from AC_CHECK_LIB
81 2001-01-08 Eli Zaretskii <eliz@is.elta.co.il>
83 * config.bat: Run the preprocessor with -traditional.
85 2001-01-01 Eli Zaretskii <eliz@is.elta.co.il>
87 * INSTALL: Move copying conditions to end of file.
89 2000-12-27 Eli Zaretskii <eliz@is.elta.co.il>
91 * INSTALL: Add basic installation procedure which assumes
92 `configure' does its job. Elaborate on image support libraries.
93 Add a pointer to Xaw3d library. Add advice about solving
94 configure-time problems by looking in config.log and setting
95 variables in the environment.
97 2000-12-27 Gerd Moellmann <gerd@gnu.org>
99 * Makefile.in (install-arch-indep): If tar fails, exit with
102 2000-12-19 Gerd Moellmann <gerd@gnu.org>
104 * configure.in: Test for XkbGetKeyboard with an AC_TRY_LINK whose
105 source file includes XKBlib.h. On some broken Solaris systems,
106 there is an XKBlib.h, reportedly, but header files included by
107 XKBlib.h are missing.
109 2000-12-14 Gerd Moellmann <gerd@gnu.org>
111 * configure.in: AC_CHECK_FUNC XkbGetKeyboard.
113 2000-12-11 Dave Love <fx@gnu.org>
115 * configure.in <alpha*-dec-osf*>: Use full path for NON_GNU_CPP.
117 2000-12-11 Paul Eggert <eggert@twinsun.com>
119 * aclocal.m4 (AC_SYS_LARGEFILE, AC_SYS_LARGEFILE_MACRO_VALUE):
120 Merge fixes from latest GNU tar version. These macros no longer
121 futz with _XOPEN_SOURCE, as that was not portable in practice.
122 (AC_FUNC_FSEEKO): New macro.
124 * configure.in: Use it instead of invoking AC_CHECK_FUNCS on
127 2000-12-05 Dave Love <fx@gnu.org>
129 * Makefile.in (TAGS, info): Avoid tab-prefixed comments in rules.
131 2000-12-02 Eli Zaretskii <eliz@is.elta.co.il>
133 * info/dir: Change the category to "Emacs".
135 2000-12-01 Gerd Moellmann <gerd@gnu.org>
137 * make-dist (tempdir): Remove epaths.h from the distribution
140 2000-11-23 Eli Zaretskii <eliz@is.elta.co.il>
142 * config.bat: Check for existence of djecho.exe, and print an
143 error message if it is not available.
145 * INSTALL: Describe possible problem with djecho.exe in old
146 versions of DJGPP v2.x.
148 2000-11-23 Gerd Moellmann <gerd@gnu.org>
150 * configure.in: Initialize HAVE_LIBXP to no.
152 2000-11-22 Gerd Moellmann <gerd@gnu.org>
154 * configure.in: Use m/macppc.h instead of the non-existent
157 2000-11-21 Gerd Moellmann <gerd@gnu.org>
159 * Makefile.in (install-arch-indep): Also install info/eshell*
162 * configure.in (HAVE_PNG): Check for the presence of
163 png_get_channels to rule out older PNG libs.
165 * configure.in (AC_OUTPUT): Arrange to emit definitions of
166 GCC and NON_GNU_CPP into config.status.
168 2000-11-20 Dave Love <fx@gnu.org>
170 * configure.in: Fix last change.
172 * GETTING.GNU.SOFTWARE: Deleted.
173 * FTP: New file to replace it.
174 * make-dist: Add FTP, remove GETTING.GNU.SOFTWARE.
176 2000-11-20 Gerd Moellmann <gerd@gnu.org>
178 * configure.in: Use -traditional with GNU cpp.
180 2000-11-17 Gerd Moellmann <gerd@gnu.org>
182 * make-dist: Handle the Mac port. Distribute all makefile.w32-in.
183 Distribute more files from the nt/ subdir. Distribute PBM
184 image files from subdirs of lisp/. Distribute old change logs
185 from subdirs of lisp/. Distribute play/5x5.el.
187 2000-11-11 Dave Love <fx@gnu.org>
189 * config.sub, config.guess: Updated from master source.
191 2000-11-07 Dave Love <fx@gnu.org>
193 * configure.in: Test for mkstemp.
195 2000-11-01 Eli Zaretskii <eliz@is.elta.co.il>
197 * info/dir (Top): Rearrange menu items more logically, and put
198 them into a single category. Add menu items for RefTeX and
201 2000-10-29 Kai Gro
\e,A_
\e(Bjohann <Kai.Grossjohann@CS.Uni-Dortmund.DE>
203 * Makefile.in (install-arch-indep): Use --info-dir instead of
204 --dir-file, and a simple argument instead of --info-file, so that
205 the Debian version of install-info also works.
207 2000-10-19 Eric M. Ludlam <zappo@ultranet.com>
209 * info/dir (Speedbar): Add entry.
211 2000-10-16 Eli Zaretskii <eliz@is.elta.co.il>
213 * INSTALL: Describe the new image-support options to the configure
214 script. List URLs where image support libraries can be found.
216 2000-10-14 Eli Zaretskii <eliz@is.elta.co.il>
218 * info/dir (Top): Add an entry for Eshell.
220 2000-10-02 Dave Love <fx@gnu.org>
222 * configure.in: Check for gai_strerror.
224 2000-10-01 Andreas Schwab <schwab@suse.de>
226 * Makefile.in (install-arch-indep): Update list of installed info
229 2000-09-30 Gerd Moellmann <gerd@gnu.org>
231 * configure.in: Support `sparc*-*-netbsd*'.
233 2000-09-29 Eli Zaretskii <eliz@is.elta.co.il>
235 * info/dir (MIME): Add entry for emacs-mime.
237 2000-09-29 Dave Love <fx@gnu.org>
239 * configure.in: Fix alpha*-dec-osf4 using the osf5 config.
241 2000-09-26 Gerd Moellmann <gerd@gnu.org>
243 * make-dist: Adapt to the change of leim/Makefile which was
244 necessary to ensure a reasonably working `make dist'.
246 * leim-Makefile.in: Moved to leim/Makefile.in..
248 * noleim-Makefile.in: New file, formerly leim/Makefile.in.
250 2000-09-21 Kenichi Handa <handa@etl.go.jp>
252 * leim-Makefile.in (TIT-GB, TIT-BIG5, NON-TIT-GB, NON-TIT-BIG5)
253 (NON-TIT-CNS, JAPANESE, KOREAN, THAI, VIETNAMESE, LAO, INDIAN)
254 (TIBETAN, LATIN, SLAVIC, GREEK, RUSSIAN, MISC): Rename all .el
256 (${TIT}): Adjusted for the above change.
257 (clean mostlyclean): Likewise.
258 (.el.elc): New target.
260 2000-09-19 Gerd Moellmann <gerd@gnu.org>
262 * make-dist: Include XPM and XBM files in lisp/ and subdirs
265 2000-09-18 Gerd Moellmann <gerd@gnu.org>
267 * make-dist (skk): Rename to `ja-dic' because the leim directory
270 2000-09-14 Dave Love <fx@gnu.org>
272 * configure.in: Fix spurion in last change.
274 2000-09-14 Gerd Moellmann <gerd@gnu.org>
276 * configure.in (USE_MMAP_FOR_BUFFERS): Recognize in system
277 configuration files instead of REL_ALLOC_MMAP. Set REL_ALLOC
278 to `no' if defined. Change result report.
280 2000-09-08 Dave Love <fx@gnu.org>
282 * configure.in: Remove spurious `@'s.
284 * aclocal.m4 (AC_FUNC_MMAP): Use fixed version from development
287 2000-09-06 Gerd Moellmann <gerd@gnu.org>
289 * configure.in (REL_ALLOC_MMAP): Recognize in system configuration
290 file and print informational message.
292 * configure.in (AC_FUNC_MMAP): Add.
294 2000-09-01 Gerd Moellmann <gerd@gnu.org>
296 * configure.in: Add ``checking'' messages for
297 XpmReturnAllocPixels.
299 2000-08-28 Gerd Moellmann <gerd@gnu.org>
301 * configure.in: Check <strings.h>; check `index' and `rindex'
304 2000-08-26 Kenichi Handa <handa@etl.go.jp>
306 * configure.in <alpha*-dec-osf*>: Move "NON_GNU_CPP='cpp'" before
307 "case "${canonical}" in".
309 2000-08-25 Dave Love <fx@gnu.org>
311 * configure.in <osf>: Use NON_GNU_CPP='cpp' always.
313 2000-08-25 Kenichi Handa <handa@etl.go.jp>
315 * leim-Makefile.in: Rename skk to ja-dic throughout the file.
317 2000-08-24 Gerd Moellmann <gerd@gnu.org>
319 * configure.in <making srcdir absolute>: Unset CDPATH in case $PWD
320 contains a relative path. Protect against unusable values of
323 2000-08-08 Eli Zaretskii <eliz@is.elta.co.il>
325 * info/dir (WoMan): Add entry.
327 * config.bat (maindir): Update src/_gdbinit even if it does
330 2000-08-07 Gerd Moellmann <gerd@gnu.org>
332 * Makefile.in (config.status): Prepend `$(srcdir)/' to
335 2000-08-03 Gerd Moellmann <gerd@gnu.org>
337 * configure.in: Add support for ia64*-*-linux*.
339 2000-07-27 Gerd Moellmann <gerd@gnu.org>
341 * make-dist (aclocal.m4): Include in distribution.
343 2000-07-26 Dave Love <fx@gnu.org>
345 * configure.in (AC_SYS_LARGEFILE): Moved earlier.
347 2000-07-24 Dave Love <fx@gnu.org>
349 * configure.in: Add AC_SIZE_T.
351 2000-07-18 Dave Love <fx@gnu.org>
353 * configure.in: Reorder so that most tests are done after CPPFLAGS
354 is set from the C_SWITCH_... definitions.
356 2000-07-10 Gerd Moellmann <gerd@gnu.org>
358 * configure.in (HAVE_XPM): Undo previous change. Check for
359 preprocessor define XpmReturnAllocPixels.
361 2000-07-06 Gerd Moellmann <gerd@gnu.org>
363 * configure.in (HAVE_XPM): Check for XpmReturnAllocPixels
364 instead of XpmReadFileToPixmap.
366 2000-07-05 Ken Raeburn <raeburn@gnu.org>
368 * configure.in: Check for <soundcard.h>. Look for ossaudio
369 library, and set LIBSOUND accordingly.
371 2000-07-05 Dave Love <fx@gnu.org>
373 * configure.in: Use AC_HEADER_SYS_WAIT.
375 2000-07-05 Gerd Moellmann <gerd@gnu.org>
377 * make-dist: Check DONTCOMPILE in lisp/Makefile.in instead of
378 lisp/Makefile. Distribute lisp/Makefile.in instead of
381 2000-06-30 Ken Raeburn <raeburn@gnu.org>
383 * configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS,
384 while searching for image-handling libraries.
386 2000-06-26 Gerd Moellmann <gerd@gnu.org>
388 * configure.in (--with-xim): New option.
390 2000-06-23 Dave Love <fx@gnu.org>
392 * configure.in [HAVE_TIMEVAL]: Move gettimeofday test here, test
393 for struct timezone and test how we can call gettimeofday.
394 Check for OSF 5+. Check for term.h.
396 * aclocal.m4: Define the post-2.13 stuff conditionally on autoconf
399 2000-06-23 Gerd Moellmann <gerd@gnu.org>
401 * configure.in (HAVE_LIBXP): Change test for libXp.
403 2000-06-21 Dave Love <fx@gnu.org>
405 * configure.in: Check for fcntl.h. Use AC_FUNC_GETLOADAVG, not
406 simple test for getloadavg and substitute GETLOADAVG_LIBS.
407 Simplify test for GETTIMEOFDAY_ONE_ARGUMENT.
409 2000-06-19 Dave Love <fx@gnu.org>
411 * configure.in (GETTIMEOFDAY_ONE_ARGUMENT): Fix in case
412 _XOPEN_SOURCE is defined.
414 2000-06-16 Gerd Moellmann <gerd@gnu.org>
416 * Makefile.in (distclean): Also make distclean in lisp/.
418 2000-06-15 Eli Zaretskii <eliz@is.elta.co.il>
420 * config.bat: Generate lisp/Makefile from lisp/Makefile.in.
422 2000-06-15 Gerd Moellmann <gerd@gnu.org>
424 * make-dist: Add --help and --snapshot options.
426 2000-06-14 Gerd Moellmann <gerd@gnu.org>
428 * configure.in: Generate lisp/Makefile.
430 * configure.in: Add support for `*-lynxos*'.
431 Use `cpp' as NON_GNU_CPP for `alpha*-dec-osf[5-9]*', as
432 recommended by <Karen.Dorhamer@compaq.com> to fix problems
435 2000-06-13 Ken Raeburn <raeburn@gnu.org>
437 * Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when
438 it's on a continuation line.
440 2000-06-02 Dave Love <fx@gnu.org>
442 * Makefile.in: (install-arch-indep): Add pcl-cvs to list of info
445 * configure.in: Don't specify -n32 flag for mips-sgi-irix6.5.
446 Check for struct exception. Use AC_SYS_LARGEFILE and move ftello
449 * aclocal.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES)
450 (AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New.
452 2000-05-26 Gerd Moellmann <gerd@gnu.org>
454 * configure.in: Add check for speed_t typedef.
456 2000-05-25 Ken Raeburn <raeburn@gnu.org>
458 * Makefile.in (install-arch-dep): Install fns-*.el only if it
459 exists; it won't in the CANNOT_DUMP case.
461 2000-05-25 Gerd Moellmann <gerd@gnu.org>
463 * Makefile.in: Ignore exit status of `unset CDPATH' everywhere.
464 On FreeBSD, the exit status is 1 if CDPATH is not set.
465 (install-arch-indep): Install ebrowse.info.
467 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
469 * configure.in: Check for grandpt and getpt.
471 2000-05-09 Dave Love <fx@gnu.org>
473 * Makefile.in (install-arch-indep): Filter CVS as well as RCS.
475 2000-05-05 Gerd Moellmann <gerd@gnu.org>
477 * make-dist: Make a link for lib-src/grep-changelog. Copy
480 2000-05-01 Eli Zaretskii <eliz@is.elta.co.il>
482 * config.bat: Identify the beginning of the cpp stuff in
483 src/Makefile.in and lib-src/Makefile.in more accurately.
485 2000-04-27 Gerd Moellmann <gerd@gnu.org>
487 * configure.in: Add support for `powerpc*-*-linux-gnu*'.
489 2000-04-19 Gerd Moellmann <gerd@gnu.org>
491 * configure.in: Add support for `powerpc-*-netbsd*'.
493 2000-04-19 Dave Love <fx@gnu.org>
495 * configure.in: Don't use AC_FUNC_GETLOADAVG.
497 * aclocal.m4 (AC_FUNC_MKTIME): Use AC_SUBST.
499 2000-04-16 Dave Love <fx@gnu.org>
501 * Makefile.in (${srcdir}/configure): Depend on aclocal.m4.
503 2000-04-14 Dave Love <fx@gnu.org>
505 * configure.in: Use AC_FUNC_GETLOADAVG, AC_FUNC_MKTIME.
507 * aclocal.m4 (AC_FUNC_MKTIME): New.
509 2000-03-28 Ken Raeburn <raeburn@gnu.org>
511 * configure.in: Line up "--help" output a little better.
513 2000-03-26 Gerd Moellmann <gerd@gnu.org>
515 * Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src):
517 (bootstrap): Rewritten in terms of the new targets above. Make
520 2000-03-12 Gerd Moellmann <gerd@gnu.org>
522 * config.guess, config.sub: Use the versions of the files from
525 2000-03-08 Dave Love <fx@gnu.org>
527 * configure.in: Use AC_PROG_RANLIB, AC_C_PROTOTYPES,
528 AC_C_VOLATILE. Define POINTER_TYPE.
530 * aclocal.m4: New file.
532 2000-03-02 Gerd Moellmann <gerd@gnu.org>
534 * configure.in (machine): Add `mipsel-*-netbsd*' and
537 2000-03-01 Gerd Moellmann <gerd@gnu.org>
539 * configure.in (machine): Add support for `*-auspex-sunos*'.
541 2000-02-29 Gerd Moellmann <gerd@gnu.org>
543 * configure.in (C_OPTIMIZE_SWITCH) [__GNUC__]: Use -O2.
545 2000-02-18 Dave Love <fx@gnu.org>
547 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
549 2000-02-18 Andreas Schwab <schwab@suse.de>
551 * Makefile.in (install-arch-indep): Add eudc to list of installed
554 2000-02-17 Ken Raeburn <raeburn@gnu.org>
556 * configure.in: Include -lz and -ljpeg (if it's available) when
557 testing for the tiff library.
559 2000-02-17 Gerd Moellmann <gerd@gnu.org>
561 * configure.in: Remove LISP_FLOAT_TYPE.
563 2000-02-12 Dave Love <fx@gnu.org>
565 * configure.in: Use AC_FUNC_VFORK.
567 2000-02-01 Gerd Moellmann <gerd@gnu.org>
569 * make-dist: Various fixes for new development tree.
571 * leim-Makefile.in: New file.
573 2000-01-31 Gerd Moellmann <gerd@gnu.org>
575 * Makefile.in (dist): Call ./make-dist.
577 2000-01-24 Dave Love <fx@gnu.org>
579 * configure.in: Remove -G0 from Irix NON_GCC_TEST_OPTIONS.
581 2000-01-18 Gerd Moellmann <gerd@gnu.org>
583 * configure.in (HAVE_GIF): Check for DGifOpen instead of
586 2000-01-11 Andreas Schwab <schwab@suse.de>
588 * Makefile.in (install-arch-indep): Update list of info files to
591 2000-01-05 Dave Love <fx@gnu.org>
593 * configure.in: Check for jerror.h as well as libjpeg.
595 2000-01-03 Andreas Schwab <schwab@suse.de>
597 * Makefile.in (install-arch-indep): Install autotype*. Run
598 install-info on autotype and emacs-faq.info.
600 1999-12-04 Dave Love <fx@gnu.org>
602 * Makefile.in: (install-arch-indep): Depend on `info'.
603 (install-strip): Use `install' as sub-make target.
605 1999-11-23 Ken Raeburn <raeburn@gnu.org>
607 * configure.in: Restore Kerberos code deleted on 1999-05-29 that
608 didn't need to be deleted. Check for the k5crypto library as well
609 as the crypto library; MIT Kerberos 1.1 changed the name.
611 1999-11-18 Dave Love <fx@gnu.org>
613 * configure.in: Fix NON_GNU_CPP for Irix 6 to avoid failing tests.
615 1999-11-11 Erik Naggum <erik@naggum.no>
617 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
619 1999-11-08 Dave Love <fx@gnu.org>
621 * configure.in: Fix change for --with-pop default.
623 1999-11-04 Dave Love <fx@gnu.org>
625 * configure.in: Default to --with-pop. Change sense of with-gcc
626 and with-toolkit-scroll-bars messages to reflect the defaults.
628 1999-11-01 Gerd Moellmann <gerd@gnu.org>
630 * INSTALL: Mention the Emacs Lisp Reference.
632 1999-10-27 Noah Friedman <friedman@splode.com>
634 * configure.in: Check for dynamic ptys (/dev/ptmx, /dev/pts/).
636 1999-10-23 Gerd Moellmann <gerd@gnu.org>
638 * Makefile.in (bootstrap): New target.
640 1999-10-19 Paul Eggert <eggert@twinsun.com>
642 Add support for large files. Merge glibc 2.1.2.
644 * configure.in (AC_CHECK_HEADERS): Add stdio_ext.h.
645 (HAVE_TM_GMTOFF): New symbol.
646 (AC_CHECK_FUNCS): Add __fpending, ftello, getloadavg, mblen,
648 (LOCALTIME_CACHE): Don't include stdlib.h, as config.h does this now.
650 1999-10-09 Stefan Monnier <monnier@cs.yale.edu>
652 * make-dist (dontcompile): look for the DONTCOMPILE variable rather
653 than the obsolete dontcompilefiles pseudo-rule in lisp/Makefile.
655 1999-10-09 Richard M. Stallman <rms@gnu.org>
657 * Makefile.in (uninstall, install-arch-indep, install-arch-dep):
658 Unset CDPATH to prevent cd from generating output.
660 1999-10-08 Stefan Monnier <monnier@cs.yale.edu>
662 * update-subdirs: also ignore CVS subdirs.
664 1999-10-07 Gerd Moellmann <gerd@gnu.org>
666 * Makefile.in (install-arch-indep): Add ada-mode.
668 1999-10-06 Dave Love <fx@gnu.org>
670 * Makefile.in: Add rules for config.status, configure.
672 1999-09-07 Gerd Moellmann <gerd@gnu.org>
674 * configure.in (--with-sound): Removed.
676 1999-08-30 Gerd Moellmann <gerd@gnu.org>
678 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after
680 (HAVE_TIFF): Add -lm to library check.
682 1999-08-28 Richard Stallman <rms@gnu.org>
684 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for
685 -lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down
686 after the other X-related libraries.
688 1999-08-21 Dave Love <fx@gnu.org>
690 * configure.in: Don't check for jpeglib.h.
692 1999-08-20 Gerd Moellmann <gerd@gnu.org>
694 * configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h.
695 (HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none.
697 1999-08-18 Dave Love <fx@gnu.org>
699 * configure.in: : Check for termcap.h.
701 1999-08-15 Gerd Moellmann <gerd@gnu.org>
703 * configure.in: Add --with-toolkit-scroll-bars. If "no",
704 use Emacs' scroll bars, even if configured for Motif or when
707 1999-08-12 Wolfgang Rupprecht <wolfgang@wsrcc.com>
709 * configure.in: Check for getaddrinfo.
711 1999-08-04 Eli Zaretskii <eliz@gnu.org>
713 * config.bat: Make --no-debug work again by removing -gcoff.
715 1999-07-30 Dave Love <fx@gnu.org>
717 * configure.in: Check for stdlib.h.
719 1999-07-19 Dave Love <fx@gnu.org>
721 * configure.in: Grok sparc64-*-linux-gnu*.
723 After the release of 20.4, development was split into two separate
724 code lines. One line contained the code for Emacs 21, and the other
725 one the code for the 20.x releases after 20.4. The following change
726 log entries up to the entry ``20.4 released'' are for the 20.x code
727 line. Change logs above this notice are those for the 21.x code line.
729 2000-06-13 Gerd Moellmann <gerd@gnu.org>
731 * Version 20.7 released.
733 2000-06-05 Gerd Moellmann <gerd@gnu.org>
735 * configure.in: Add powerpc*-*-linux-gnu*.
737 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
739 * configure.in: Check for grandpt and getpt.
741 2000-02-26 Gerd Moellmann <gerd@gnu.org>
743 * Version 20.6 released.
745 2000-02-18 Dave Love <fx@gnu.org>
747 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
749 2000-02-15 Gerd Moellmann <gerd@gnu.org>
751 * configure.in: Add support for arm*-g*-linux-gnu* systems.
753 1999-12-04 Gerd Moellmann <gerd@gnu.org>
755 * Version 20.5 released.
757 1999-11-28 Dave Love <fx@gnu.org>
759 * configure.in: Recognize sparc64-*-linux-gnu*.
761 1999-11-11 Erik Naggum <erik@naggum.no>
763 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
765 1999-08-04 Eli Zaretskii <eliz@gnu.org>
767 * config.bat: Make --no-debug work again by removing -gcoff.
769 1999-07-12 Richard Stallman <rms@gnu.org>
771 * Version 20.4 released.
773 1999-06-23 Karl Heuer <kwzh@gnu.org>
775 * make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state.
776 Quote $EMACS, in case it's a program with args.
778 1999-05-29 Richard M. Stallman <rms@gnu.org>
780 * configure.in: Delete the Kerberos stuff.
782 1999-05-27 Greg Hudson <ghudson@mit.edu>
784 * configure.in: Prefer kerberos 5 names.
786 1999-04-26 Richard M. Stallman <rms@gnu.org>
788 * configure.in: Check for libXp.
790 1999-04-08 Richard Stallman <rms@gnu.org>
792 * make-dist: Include change logs in subdirs of `lisp'.
794 1999-04-05 Richard Stallman <rms@gnu.org>
796 * Makefile.in (mkdir): If we create ${datadir}, make it world-readable.
797 (install-arch-indep): Make ${datadir}/emacs world-readable.
799 1999-03-30 Eli Zaretskii <eliz@gnu.org>
801 * config.bat: Use epaths.* instead of paths.*.
803 1999-03-07 Eli Zaretskii <eliz@gnu.org>
805 * INSTALL: Add detailed instructions to unpack and install
808 1999-02-26 Richard Stallman <rms@gnu.org>
810 * configure.in: Use epaths.h and epaths-force instead of paths....
812 * Makefile.in (epaths-force): Renamed from paths-force;
813 operate on epaths.in and produce epaths.h.
815 1999-02-24 Richard Stallman <rms@gnu.org>
817 * make-dist: Fix nt/icons directory handling.
819 1999-02-22 Simon Josefsson <jas@pdc.kth.se>
821 * configure.in (f301-fujitsu-uxpv4.1): New target.
823 1999-02-20 Richard Stallman <rms@gnu.org>
825 * make-dist (tempparent): Fix command to update info files.
827 1999-02-09 Richard Stallman <rms@gnu.org>
829 * configure.in (powerpc-apple-netbsd*): New alternative.
831 1999-01-25 Geoff Voelker <voelker@cs.washington.edu>
833 * make-dist: Include the new directory nt/icons in distributions.
835 1999-01-19 Richard Stallman <rms@psilocin.ai.mit.edu>
837 * configure.in: Change message about HAVE_XFREE386.
839 1999-01-07 Eli Zaretskii <eliz@gnu.org>
841 * config.bat: Support configuring with leim.
843 1998-12-16 Petri Kaurinkoski <Petri.Kaurinkoski@hut.fi>
845 * configure.in (mips-sgi-irix6.5): New target.
847 1998-12-16 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
849 * configure.in: Remove GSS-API support, since it has been removed
852 1998-12-04 Markus Rost <rost@delysid.gnu.org>
854 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
856 1998-12-04 Andreas Schwab <schwab@delysid.gnu.org>
858 * Makefile.in: Don't install customize info file. Run
859 install-info on viper info file.
861 1998-11-29 Richard Stallman <rms@psilocin.ai.mit.edu>
863 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
865 1998-11-16 Kenichi Handa <handa@etl.go.jp>
867 * configure.in (*-*-bsdi4*): New target.
869 1998-11-13 Ehud Karni <ehud@unix.simonwiesel.co.il>
871 * configure.in: Fix previous change.
873 1998-11-11 Richard Stallman <rms@gnu.org>
875 * configure.in (aviion-intel): New machine.
877 1998-11-04 Kenichi Handa <handa@etl.go.jp>
879 * configure.in (mips-nec-sysv4*): New target.
881 1998-11-03 Andreas Schwab <schwab@delysid.gnu.org>
883 * Makefile.in (install-arch-dep): Fix last change and use fns-*.el
886 1998-10-31 Richard Stallman <rms@psilocin.ai.mit.edu>
888 * make-dist: Don't include fns*.el in dist.
890 1998-10-30 Dave Love <fx@gnu.org>
892 * configure.in: Don't mkdir cpp.
894 1998-10-30 Andreas Schwab <schwab@delysid.gnu.org>
896 * Makefile.in (install-arch-dep): Install src/fns-*.el in
899 1998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu>
901 * Version 20.3 released.
903 1998-07-30 Paul Eggert <eggert@twinsun.com>
905 * Makefile.in (Makefile, src/Makefile, src/config.stamp)
906 (lib-src/Makefile, man/Makefile, oldXMenu/Makefile)
907 (lwlib/Makefile, leim/Makefile):
908 Prepend $(srcdir)/ to rule dependencies outside this dir.
910 1998-06-30 Richard Stallman <rms@psilocin.ai.mit.edu>
912 * configure.in: Use unset CDPATH instead of making it empty.
914 1998-06-20 Karl Heuer <kwzh@gnu.org>
916 * configure.in: Assume unspecified Solaris is 2.5, not 2.4.
918 1998-06-07 Richard Stallman <rms@psilocin.ai.mit.edu>
920 * make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el
921 and default.el. Sort the results.
923 1998-05-31 Karl Heuer <kwzh@gnu.org>
925 * Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't
928 1998-05-14 Richard Stallman <rms@psilocin.ai.mit.edu>
930 * Makefile.in (install-arch-indep):
931 Don't alter site-lisp/subdirs.el if it exists.
933 1998-05-12 Richard Stallman <rms@psilocin.ai.mit.edu>
935 * Makefile.in (install-arch-indep): Put `-' on commands to create
936 subdirs.el in site-lisp dirs.
938 1998-05-07 Richard Stallman <rms@psilocin.gnu.org>
940 * Makefile.in (install-arch-indep): Fix typo in previous change.
942 1998-05-06 Richard Stallman <rms@psilocin.gnu.org>
944 * Makefile.in (install-arch-indep): Pass --dir-file to install-info.
946 1998-04-28 Richard Stallman <rms@psilocin.gnu.org>
948 * Makefile.in (mkdir): Create the site-lisp dirs.
949 (install-arch-indep): Make site-lisp/subdirs files world-readable.
951 1998-04-26 Richard Stallman <rms@psilocin.gnu.org>
953 * Makefile.in (INSTALL_INFO): New variable.
954 (install-arch-indep): Don't replace the dir file if it already exists.
955 Use the install-info program, via INSTALL_INFO, to add entries.
956 Make the `info' subdir and the Info files world-readable.
958 1998-04-16 Eli Zaretskii <eliz@delysid.gnu.org>
960 * config.bat: Make sure the environment is large enough to support
961 all the "set foo=bar" commands. Update pointers to DJGPP FTP
964 1998-04-10 Karl Heuer <kwzh@gnu.org>
966 * make-dist: Don't accept EMACS=t when testing for $EMACS set.
968 1998-04-06 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
970 * configure.in: Add --with-gssapi to specify GSS-API
971 authentication support for movemail.
973 1998-04-02 Richard Stallman <rms@psilocin.ai.mit.edu>
975 * Makefile.in (install-arch-indep): Fix previous change.
977 1998-03-30 Richard Stallman <rms@psilocin.ai.mit.edu>
979 * Makefile.in (info): Run man in build dir, not srcdir.
981 1998-03-28 Richard Stallman <rms@psilocin.ai.mit.edu>
983 * Makefile.in (install-arch-indep): Fix previous change.
985 1998-03-23 Kenichi Handa <handa@etl.go.jp>
987 * Makefile.in (top_distclean): Check the existence of `lock'
990 1998-03-22 Richard Stallman <rms@gnu.org>
992 * Makefile.in (install-arch-indep): Put special subdirs.el files
993 in site-lisp dirs. Use normal-top-level-add-subdirs-to-load-path.
995 1998-03-21 Richard Stallman <rms@psilocin.gnu.org>
997 * make-dist: Fix shell syntax in check for missing .el or .elc files.
999 1998-03-09 Richard Stallman <rms@psilocin.gnu.org>
1001 * configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10.
1002 (m68*-hp-hpux*): Handle versions 1X like 10.
1004 1998-03-07 Richard Stallman <rms@psilocin.gnu.org>
1006 * make-dist: PROBLEMS is now in etc, not top level dir.
1008 * Makefile.in (SOURCES): Delete PROBLEMS.
1010 1998-02-25 Richard Stallman <rms@gnu.org>
1012 * configure.in (hppa*-hp-hpux*): Use hpux10 by default.
1014 * Makefile.in (install-arch-indep): Do chmod a+x on subdirs.
1016 1998-01-17 Richard Stallman <rms@gnu.org>
1018 * Makefile.in (install-arch-indep): Add semicolon before `else'.
1020 1998-01-02 Richard Stallman <rms@psilocin.gnu.org>
1022 * make-dist (tempparent): New option --no-check.
1024 * make-dist: Don't do anything with cpp directory.
1026 1997-12-20 Richard Stallman <rms@psilocin.gnu.org>
1028 * configure.in (sparc-fujitsu-sysv4*): New target.
1030 1997-12-17 Andreas Schwab <schwab@gnu.org>
1032 * configure.in: Cache more tests. Add missing quotes around
1033 message with embedded comma.
1035 1997-12-04 Karl Heuer <kwzh@gnu.org>
1037 * Makefile.in (unlock, relock): Don't reference cpp/ directory.
1039 1997-11-26 Joel N. Weber II <devnull@gnu.org>
1041 * make-dist: Changed the comment about `umask 0' to say `Don't
1042 restrict access to any files.'; previously it said `Don't protect
1043 any files', which may have implied that we think fascism is good.
1045 1997-11-24 Paul Eggert <eggert@twinsun.com>
1047 * configure.in (AC_CHECK_FUNCS): Add strftime. The new GNU C library
1048 strftime needs the underlying host's strftime for locale dependent
1051 1997-11-20 Abraham Nahum <miko@uxsrvc.tti.co.il>
1053 * configure.in (i586-dg-dguxR4.*): New name in case branch.
1055 1997-11-20 Eli Zaretskii <eliz@is.elta.co.il>
1057 * config.bat: Configure the man subdirectory.
1059 1997-11-07 Paul Eggert <eggert@twinsun.com>
1061 * configure.in (AC_CHECK_LIB): Add -lintl.
1063 1997-11-07 Karl Heuer <kwzh@gnu.org>
1065 * make-dist (check for .elc files): Avoid bash-specific syntax.
1066 (check for overflow 14-char limit): Simplify.
1068 1997-11-07 Richard Stallman <rms@gnu.org>
1070 * Makefile.in (install): Move blessmail last.
1072 1997-10-02 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1074 * configure.in (gettimeofday, one arg or two):
1075 Clarify messages by avoiding double negative.
1077 1997-09-30 Karl Eichwalder <ke@suse.de>
1079 * Makefile.in (install-arch-indep): install the widget info file.
1081 1997-09-24 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1083 * configure.in (with-pop, with-kerberos): Need to check Kerberos
1084 libraries in reverse order, so that libraries will appear in the
1085 correct dependency order on the link line (and so that the
1086 configure checks themselves will work properly when early
1087 libraries depend on later ones).
1089 1997-09-21 Erik Naggum <erik@naggum.no>
1091 * make-dist (making links to `src'): Keep timestamp on copied
1094 * make-delta: New script to produce delta distributions.
1096 1997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1098 * Version 20.2 released.
1100 1997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1102 * Version 20.1 released.
1104 * Makefile.in (install-leim): Depend on mkdir.
1105 (leim): Depend on src.
1107 1997-09-13 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1109 * configure.in: Recognize alpha* instead of just alpha.
1111 1997-09-12 Paul Eggert <eggert@twinsun.com>
1113 * leim-Makefile.in (mostlyclean, maintainer-clean): New targets.
1115 1997-09-12 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1117 * update-subdirs: Use rm -f.
1119 1997-09-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1121 * update-subdirs: Delete subdirs.el if this dir has no subdirs.
1122 Ignore subdirs named Old.
1124 1997-08-04 Kenneth Stailey <kstailey@elbereth.disclosure.com>
1126 * configure.in: Add OpenBSD clause to set $machine.
1128 1997-09-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1130 * make-dist: Recompile everything after updating various Lisp files.
1131 Recompile in leim as well as lisp.
1132 Check in leim as well as lisp for mismatched files and too-long names.
1134 1997-09-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1136 * Makefile.in (TAGS tags): Simply refer this to the src subdir.
1138 1997-08-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1140 * Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it
1141 before trying to copy anything from it.
1143 1997-08-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1145 * Makefile.in (man/Makefile): New target.
1146 (tags): Define env var EMACS and run Makefile from build dir.
1148 1997-08-27 Eli Zaretskii <eliz@psilocin.gnu.ai.mit.edu>
1150 * config.bat: If src/_gdbinit doesn't exist, try using
1151 src/.gdbinit to create it (for building on Windows 95).
1153 1997-08-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1155 * Makefile.in (install-arch-indep):
1156 Discard extra data in tar | tar pipes.
1158 1997-08-24 NIIBE Yutaka <gniibe@mri.co.jp>
1160 * configure.in (x_default_search_path): Corrected
1161 '${x_library}' to '${x_library}/X11'.
1163 1997-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1165 * configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1,
1167 1997-08-22 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1169 * configure.in: Support auto-configuration of both Kerberos V4 and
1170 Kerberos V5 for movemail, including detection of V4 and V5 header
1171 files and libraries.
1173 1997-08-16 NIIBE Yutaka <gniibe@etl.go.jp>
1175 * configure.in: Compute x_default_search_path
1176 and substitute into makefiles.
1178 * Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h.
1180 1997-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1182 * Makefile.in (install-arch-indep): Run list-load-path-shadows.
1184 1997-08-07 Erik Naggum <erik@naggum.no>
1186 * configure.in: Remove lockdir, it is no longer needed.
1187 * Makefile.in (mkdir): Don't create lockdir.
1188 (lockdir): Variable deleted.
1189 (paths-force): Don't operate on PATH_LOCK.
1191 1997-08-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1193 * leim-Makefile.in (clean, distclean): New targets.
1195 * make-dist: Include leim/ChangeLog in leim distribution.
1197 1997-08-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1199 * configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP.
1201 1997-07-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1203 * Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS.
1205 1997-07-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1207 * Makefile.in (LDFLAGS): Get this from configure, like CFLAGS.
1209 1997-07-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1211 * make-dist: Update leim/leim-list.el.
1212 Pass along value of $EMACS when updating lisp dir.
1214 1997-07-25 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1216 * configure.in (doug_lea_malloc): Make __after_morecore_hook a
1217 prerequisite to the use of Doug Lea's malloc.
1219 1997-07-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1221 * Makefile.in (top_distclean): Use -f to delete contents of lock dir.
1223 * make-dist: Use name leim/SKK-DIC, not leim/SKK.
1225 1997-07-16 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1227 * make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim.
1229 1997-07-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1231 * configure.in (mips-sony-newsos6*): File news-risc.h renamed
1234 1997-07-10 Eli Zaretskii <eliz@is.elta.co.il>
1236 * config.bat: Use `sed' instead of `cp', which might not be
1239 1997-07-09 Kenichi Handa <handa@etl.go.jp>
1241 * Makefile.in (mostlyclean): Add cleaning leim directory.
1242 (clean, distclean, maintainer-clean): Likewise.
1244 1997-07-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1246 * make-dist (bogosities): Check subdirs of `lisp' also.
1248 1997-07-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1250 * make-dist (etc): Really avoid symlinks now.
1251 (lisp): Don't delete from subdirs the things we never copy.
1253 1997-07-07 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1255 * Makefile.in (install-arch-indep): Correct the target name.
1256 The first letter `i' was dropped by the previous change of mine.
1258 1997-07-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1260 * configure.in (leim/Makefile): Generate this.
1261 (*-sysv4.2uw*): Recognize new alternative.
1263 * leim-Makefile.in: Renamed from leim-Makefile.
1265 * make-dist: Set up real-leim subdirectory,
1266 with the real contents of leim; then move it to
1267 a separate top-level directory.
1269 * make-dist: Don't mention site-lisp, site-init, site-start
1270 or default, when listing files hat are not compiled and should be.
1272 * configure.in: Create src/config.stamp at the end.
1274 1997-07-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1276 * Makefile.in (install-leim): Correct previous change.
1278 1997-07-02 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1280 * Makefile.in (install-leim): New target.
1281 (install): Depend on install-leim.
1283 1997-07-01 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1285 * Makefile.in (SUBDIR): Add leim.
1286 (SUBDIR_MAKEFILES): Add leim/Makefile.
1287 (leim/Makefile): New target.
1289 1997-07-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1291 * leim-Makefile: New file.
1292 * make-dist: Initialize a `leim' subdirectory with that makefile.
1294 1997-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1296 * configure.in (GNU_MALLOC_reason): Fix message text.
1298 1997-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1300 * make-dist (lisp): Don't process subdirs that start with =.
1301 (etc): Copy symlinks, as in src.
1303 1997-06-26 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1305 * configure.in (i*86-*-unixware*): New alternative.
1307 1997-06-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1309 * Makefile.in (src/config.stamp): Target renamed from src/config.h
1310 and touch it explicitly.
1312 * configure.in (mips-sony-newsos6*): New alternative.
1313 (mips-*-linux-gnu*): New alternative.
1314 (*-*-bsdi*): New alternative.
1315 (i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives.
1317 1997-06-22 Dave Love <d.love@dl.ac.uk>
1319 * Makefile.in (lib-src): Depend on src/config.h (e.g. for
1321 (src/config.h): New target to re-configure if src/config.in
1324 1997-06-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1326 * configure.in (shutdown): Check for `shutdown' function.
1328 1997-06-18 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1330 * update-subdirs: Include the directory "language" in subdirs.
1332 1997-06-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1334 * configure.in (m88k-dg-dgux4*): New alternative.
1335 (alpha-*-netbsd*): New alternative.
1336 (powerpcle-*-solaris2*): New alternative.
1338 1997-05-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1340 * make-dist: Warn about .el files that are not compiled.
1342 1997-05-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1344 * Makefile.in (dist): Don't run update-subdirs here,
1345 since make-dist now gets that done.
1347 * make-dist: Use the new `updates' target in lisp/Makefile.
1349 * make-dist: Use new non-file targets in lisp/Makefile.
1351 1997-04-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1353 * make-dist: Handle all subdirs of `lisp' uniformly.
1354 Don't handle `term' and `language' specially.
1355 Clear out umask at the beginning.
1357 1997-04-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1359 * make-dist: Use Make to update finder-inf.el and autoloads.
1360 Also update cus-load.el.
1362 1997-04-09 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1364 * configure.in (doug_lea_malloc): First check for SYSTEM_MALLOC,
1365 in case it is desirable to disable the GNU malloc features with
1368 1997-04-08 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1370 * configure.in (DOUG_LEA_MALLOC):
1371 Define if malloc_{get,set}_state exist.
1373 1997-03-05 Ken'ichi Handa <handa@etl.go.jp>
1375 * make-dist: Make links for files under lisp/language.
1377 1997-02-20 Kenichi Handa <handa@etl.go.jp>
1379 * update-subdirs: Exclude the directory "language" from subdirs.
1381 1997-01-26 Karl Heuer <kwzh@gnu.ai.mit.edu>
1383 * configure.in: Check for rint and cbrt.
1385 1997-01-01 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1387 * make-dist: Use $EMACS to say where to run Emacs.
1388 Add --no-update option.
1390 1996-12-30 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1392 * configure.in (hppa1.1-hitachi-hiuxmpp): New configuration.
1394 1996-12-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1396 * make-dist (copying src): Check thoroughly for symlinks
1397 and copy them in all cases. Regularize the linking of *.in
1398 and *.opt and ChangeLog files.
1399 (copying lib-src): Likewise.
1400 Don't rm getdate.c or y.tab.*--they don't exist any more.
1402 1996-12-18 Jonathan I. Kamens <jik@annex-1-slip-jik.cam.ov.com>
1404 * configure.in: Check for libmail, maillock.h and
1405 touchlock (for movemail).
1407 1996-12-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1409 * configure.in (limits.h): Check for this file.
1411 1996-12-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1413 * configure.in (rs6000-ibm-aix4.2): New alternative.
1414 (rs6000-ibm-aix4.0): New alternative.
1415 (rs6000-ibm-aix4*): Assume aix 4.1 by default.
1417 1996-11-22 Ben Harris <bjh21@cam.ac.uk>
1419 * configure.in: Recognize vax-*-netbsd*.
1421 1996-11-06 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1423 * configure.in (locallisppath): Add leim directory.
1425 1996-10-31 Eli Zaretskii <eliz@is.elta.co.il>
1427 * config.bat: Make sure `mv' supports forward slashes and -f.
1429 1996-10-28 Christian Limpach <chris@nice.ch>
1431 * configure.in (hppa*-next-nextstep*): * added after hppa
1432 to accept hppa1.0 and hppa1.1.
1434 1996-10-05 Marcus G. Daniels <marcus@coulee.tdb.com>
1436 * configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX.
1437 * configure.in (ld_switch_machine): Fix typo.
1439 1996-09-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1441 * configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE
1442 from config.h and use them in $ac_link.
1444 1996-09-28 Erik Naggum <erik@psilocin.gnu.ai.mit.edu>
1446 * configure.in: Create a subdir named `lisp'.
1448 1996-09-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1450 * configure.in: Check for getcwd.
1452 1996-09-04 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1454 * configure.in: Check for termios.h. Check for setpgid.
1456 1996-08-31 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1458 * configure.in: Check for setrlimit.
1460 1996-08-31 Paul Eggert <eggert@twinsun.com>
1462 * configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo.
1464 1996-08-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1466 * configure.in: Check for utimes.
1468 * configure.in: Check for com_err library, but only
1469 if --with-kerberos was used. Check for krb and des
1470 only if --with-kerberos.
1472 1996-08-26 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1474 * Makefile.in (INSTALL_STRIP): New variable.
1475 (install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM.
1476 (install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src.
1478 1996-08-25 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1480 * configure.in: Check for krb and des libraries.
1482 1996-08-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1484 * configure.in (*-sunos4.1.[3-9]*noshare):
1485 Use sunos413, not sunos4-1-3.
1486 (m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3.
1487 (arm-acorn-riscix1.2*): Use riscix12, not riscix1-2.
1489 1996-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1491 * Makefile.in (src/paths.h): Target deleted.
1492 (paths-force): Delete all dependencies on this target
1493 but don't delete the target.
1494 (install): Depend on `all'.
1495 (paths-force): Don't print a message.
1497 * configure.in: Generate src/paths.h here.
1499 1996-08-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1501 * configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS):
1502 New variables that affect linking only.
1503 (alpha-dec-osf*): Use those instead of previous change.
1505 1996-08-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1507 * Makefile.in (install-arch-indep): Install info/messages.
1509 1996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1511 * Version 19.33 released.
1513 1996-08-10 Marcus Daniels <marcus@sayre.sysc.pdx.edu>
1515 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1516 Fix previous change.
1518 1996-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1520 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1523 1996-08-07 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1525 * configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS
1526 and NON_GCC_TEST_OPTIONS.
1528 1996-08-06 Paul Eggert <eggert@twinsun.com>
1530 * configure.in (LOCALTIME_CACHE): Don't put a string literal
1531 "TZ=..." in environ.
1533 1996-08-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1535 * make-dist (msdos): Add is_exec.c, sigaction.c to distribution.
1537 1996-08-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1539 * configure.in (*-sunos4.1.[3-9]*noshare): Move this before
1540 the more general *-sunos4.1.[3-9]* clause.
1542 1996-07-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1544 * Version 19.32 released.
1546 * configure.in (*-sco3.2v5*):
1547 Set OVERRIDE_CPPFLAG to a string of one space.
1548 Fix the code that uses OVERRIDE_CPPFLAG.
1550 1996-07-16 Karl Heuer <kwzh@gnu.ai.mit.edu>
1552 * configure.in: Undo previous change.
1554 1996-07-16 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1556 * config.sub: Use `pc', not `unknown', when canonicalizing
1557 the vendor for ...86.
1559 1996-07-15 David Mosberger-Tang <davidm@AZStarNet.com>
1561 * configure.in: Check for termios.h header.
1563 1996-07-11 Bill Mann <dvmann@dvncr.praxisint.com>
1565 * configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3
1567 1996-07-07 Karl Heuer <kwzh@gnu.ai.mit.edu>
1569 * configure.in: Split bsdos2 and bsdos2-1.
1571 1996-07-06 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1573 * config.sub: If last two words are not a recognized
1574 KERNEL-OS pair, use just the last word as OS, as in 19.31.
1575 Make conversion of gnu/linux to linux-gnu really work.
1577 * config.sub: If vendor unspecified with i386, use `pc' not `unknown'.
1579 1996-06-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1581 * configure.in (check for using Lucid widgets by default):
1582 Eliminate indentation that confuses some compilers.
1584 1996-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1586 * config.sub: Convert linux and gnu/linux to linux-gnu.
1588 * make-dist: Don't update getdate.c.
1589 Ignore =... files when checking for too-long Lisp file names.
1591 1996-06-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1593 * configure.in (euidaccess): Check for that, not for eaccess.
1595 1996-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1597 * configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from
1599 (mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS.
1601 1996-06-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1603 * configure.in: Rename lignux to linux-gnu in configuration names.
1604 Use gnu-linux as the opsys value (s/ file name).
1605 Allow i686 just like i386, i486, i586.
1607 1996-06-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1609 * configure.in (i*86-*-sco3.2v5): New alternative.
1610 (OVERRIDE_CPPFLAG): New variable.
1611 (CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that.
1613 * configure.in: Specify vpath for .texi files.
1615 1996-06-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1617 * configure.in: Always check for HAVE_X11R5.
1618 Separately decide whether to use a toolkit by default.
1620 1996-06-04 Bill Mann <dvmann@dvhpux1.praxisint.com>
1622 * configure.in: If X11R5 is missing the Xaw headers,
1623 default to --with-x-toolkit=no.
1625 1996-05-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1627 * configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000.
1629 1996-05-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1631 * Makefile.in (install-arch-indep): If cd etc makes output,
1632 don't treat that as part of the tar data.
1633 Check that ./lisp actually exists.
1635 1996-05-29 Karl Heuer <kwzh@gnu.ai.mit.edu>
1637 * make-dist: Check for long file names.
1639 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1641 * Version 19.31 released.
1643 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1645 * configure.in: Recognize sparc-*-lignux.
1647 1996-05-03 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1649 * make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist.
1650 Don't include config.w95.
1652 1996-04-21 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1654 * make-dist: Replace --no-clean-up and --no-tar options
1655 with --clean-up and --tar, so that the default is useful.
1657 1996-04-15 Eli Zaretskii <eliz@is.elta.co.il>
1659 * config.bat: Make sure the GDB init file is called src/_gdbinit;
1660 if not, tell the user to rename it and abort.
1662 1996-04-14 Eli Zaretskii <eliz@is.elta.co.il>
1664 * config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE
1667 1996-04-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1669 * config.bat (djgpp_ver): Variable renamed from djgpp-ver.
1671 * make-dist (MANIFEST): Fix previous change.
1672 (msdos): Put mainmake.v2 into the dist.
1674 1996-04-10 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1676 * make-dist: Exit if autoconf fails.
1678 1996-04-10 Eli Zaretskii <eliz@is.elta.co.il>
1680 * config.bat: Set djgpp-ver, and unset it at the end.
1681 Add a number of conditionals for DJGPP version 2.
1682 Rename label libsrc2 to libsrc3.
1683 Substitute for LDFLAGS in src/Makefile.
1684 Substitute for ALL_CFLAGS in lib-src/Makefile.
1686 1996-04-08 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1688 * configure.in (ncurses): Check this after checking fns like strerror.
1690 1996-04-08 Erik Naggum <erik@naggum.no>
1692 * make-dist (MANIFEST): Don't include lines from =files.
1694 1996-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1696 * make-dist: Don't put lisp/dired.todo in the dist.
1698 1996-04-05 Richard Stallman <rms@lucy.gnu.ai.mit.edu>
1700 * configure.in (HAVE_NCURSES): Look for library named ncurses.
1702 * configure.in (setlocale): Check for it.
1704 * configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp.
1706 1996-03-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1708 * configure.in: Use lignux instead of linux as value of opsys.
1710 1996-03-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1712 * Makefile.in (install-strip): Fix whitespace.
1713 Get rid of continuation.
1715 * config.sub: Convert linux or gnu/linux to lignux.
1717 1996-03-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1719 * configure.in: Accept lignux in configuration name.
1721 1996-03-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1723 * Makefile.in (install-strip): New target.
1725 1996-03-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1727 * Makefile.in (top_distclean): Use `|| true' to ignore error in rm.
1728 -f failed to do the job on Suns.
1730 1996-03-13 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1732 * Makefile.in (install-arch-dep): Don't depend on install-arch-indep.
1734 * configure.in (linux/version.h): Check for this header.
1736 1996-03-12 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1738 * configure.in: Remove -fno-builtin hackery from -lm check.
1740 1996-03-08 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1742 * configure.in (-lm check): If $GCC, append -fno-builtin to $CC for
1745 * configure.in (AC_PREREQ): Require version 2.8 of Autoconf.
1747 1996-03-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1749 * configure.in: Check for ncurses.
1751 1996-02-28 Paul Eggert <eggert@twinsun.com>
1753 * configure.in (LOCALTIME_CACHE):
1754 Also define if localtime mishandles unsetting TZ.
1755 This works around a localtime bug in mips-dec-ultrix.
1757 1996-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1759 * make-dist (finder-inf.el): Use finder-compile-keywords-make-dist.
1761 * configure.in: Improve messages about X versions.
1763 1996-02-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1765 * configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null.
1767 1996-02-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1769 * configure.in (HAVE_X11XTR6): Set it as a shell variable.
1770 (HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE.
1772 * Makefile.in (install-arch-dep): Depend on install-arch-indep.
1773 (install): Put install-arch-indep before install-arch-dep.
1775 1996-02-20 Dave Love <d.love@dl.ac.uk>
1777 * INSTALL: Clarify info about MS-DOS path handling.
1779 1996-02-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1781 * Makefile.in (install-arch-indep): Install info/ccmode*.
1782 In previous change, protect against /bin/pwd returning null string.
1784 1996-02-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1786 * Makefile.in (install-arch-indep): Copy build-dir's lisp subdir
1789 1996-02-01 Paul Eggert <eggert@twinsun.com>
1791 * configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar.
1793 1996-01-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1795 * configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails.
1797 1996-01-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1799 * Makefile.in (extraclean): Use ${top_distclean} to ensure
1800 we delete everything distclean deletes.
1802 1996-01-23 Karl Heuer <kwzh@gnu.ai.mit.edu>
1804 * make-dist (lwlib): Don't distribute lwlib-Xol* files.
1806 1996-01-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1808 * configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE
1809 into LDFLAGS instead of into LIBS.
1811 1996-01-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1813 * configure.in (HAVE_XMU): Fix typo in previous change.
1815 1996-01-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1817 * configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc.
1819 1996-01-10 Erik Naggum <erik@naggum.no>
1821 * configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'.
1823 1996-01-10 Karl Heuer <kwzh@gnu.ai.mit.edu>
1825 * Makefile.in (install-arch-indep): Ignore error if no chmod -R.
1827 1996-01-10 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1829 * configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit
1830 and use -lXt to link it.
1832 1996-01-08 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1834 * configure.in (locallisppath): Put version-specific dir first.
1836 1996-01-07 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1838 * configure.in (hppa-*-nextstep*): New alternative.
1839 (USE_X_TOOLKIT): By default, set this to "maybe";
1840 and change that later to LUCID or "no" according to X11 version.
1842 * make-dist: Recompile outdated .elc files and update all autoloads.
1844 1996-01-05 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
1846 * configure.in (locallisppath): Fix typo in last change: " -> '.
1848 1996-01-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1850 * configure.in (locallisppath): Add ../emacs/VERSION/site-lisp.
1852 1995-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1854 * Makefile.in (install-arch-indep): Give all files read permission.
1856 1995-12-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1858 * configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*):
1859 If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5.
1861 1995-12-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1863 * configure.in: Determine HAVE_X11R6.
1864 (HAVE_MENUS): Renamed from HAVE_X_MENU.
1866 1995-12-21 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1868 * configure.in: Just "solaris" now defaults to version 2.4.
1869 Add sunos4.1.n-noshare as alternative.
1871 1995-12-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1873 * configure.in (mips-sgi-irix6*): Set NON_GNU_CPP.
1875 1995-11-29 Erik Naggum <erik@naggum.no>
1877 * Makefile.in (install-arch-indep): Add missing backslash.
1879 1995-11-29 Karl Eichwalder <ke@ke.Central.DE>
1881 * Makefile.in (install-arch-indep): Don't install
1882 lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo.
1884 1995-11-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1886 * Makefile.in (install-arch-indep): Fix previous change.
1888 * configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*.
1890 1995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1892 * Version 19.30 released.
1894 * make-dist (lisp): Exclude subdirs.el.
1896 1995-11-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1898 * make-dist (etc): Delete *.orig and *.rej.
1900 1995-11-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1902 * Makefile.in (install-arch-indep): Rename old info/dir only if exists.
1904 1995-11-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1906 * configure.in (hppa*-hp-hpux10*): Use s/hpux10.h.
1908 1995-11-14 Geoff Voelker <voelker@cs.washington.edu>
1910 * make-dist (nt): Rename install, readme, and todo to
1911 INSTALL, README, and TODO.
1913 1995-11-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1915 * make-dist (lisp): Don't distribute site-start.
1917 1995-11-06 Karl Heuer <kwzh@gnu.ai.mit.edu>
1919 * make-dist: Break the hard link on alloca.c.
1921 1995-11-04 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1923 * configure.in (LIBS): Add libsrc_libs and keep the old LIBS.
1925 1995-11-02 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1927 * make-dist (src, lib-src): Don't distribute Makefile.c.
1928 (etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc.
1930 1995-10-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1932 * Makefile.in (mkdir): Create man1dir, not mandir.
1933 (uninstall): Use man1dir, not mandir.
1935 1995-10-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1937 * Makefile.in (man1dir): New variable.
1938 (install-arch-indep): Use man1dir.
1940 * configure.in (sparc-*-nextstep*): Remove incorrect .h's.
1942 * make-dist: Create lisp/MANIFEST.
1944 1995-10-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1946 * configure.in (m68k-*-linux*): New alternative.
1948 1995-10-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1950 * make-dist: Use new names config.in, paths.in, and
1951 {src,lib-src}/Makefile.in.
1953 1995-10-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1955 * configure.in: Don't bother checking for drem.
1957 1995-10-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1959 * Makefile.in (distclean): Delete line with just a tab in it.
1960 (install-arch-indep): Delete spaces that precede tabs.
1961 Delete spurious `fi' left from previous change.
1962 (install): Supply `true' as command, to avoid null command.
1964 1995-10-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1966 * configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'.
1968 1995-09-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1970 * configure.in (powerpc-*-solaris2): New alternative.x
1972 1995-09-12 Karl Heuer <kwzh@gnu.ai.mit.edu>
1974 * Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead
1975 of paths.h.tmp$$, to avoid going beyond 14 characters.
1977 1995-09-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1979 * configure.in: Improve error msg for invalid --with-x-toolkit value.
1981 1995-09-06 Paul Eggert <eggert@twinsun.com>
1983 * configure.in (LOCALTIME_CACHE): Define if tzset exists and
1984 if localtime caches TZ. Check for tzset.
1986 1995-09-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1988 * config.bat: Simplify using new names file names src/makefile.in,
1989 config.in, paths.in. Change Echo commands not to use `.
1991 1995-08-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1993 * Makefile.in (install-arch-indep): Always install the new dir file;
1994 rename the previous dir file to dir.bak or dir.old.
1996 1995-08-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1998 * configure.in (RANLIB): Substitute this into makefiles.
1999 Set it specially on solaris; set it by default on other systems.
2001 * configure.in: Fix previous Alpha change.
2003 1995-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2005 * configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and
2006 NON_GCC_TEST_OPTIONS.
2008 1995-08-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2010 * configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS
2011 from config.h, use SPECIFIED_CFLAGS to get what the user specified.
2013 * configure.in (alpha-*-linux*): New configuration.
2015 1995-08-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2017 * configure.in (m68*-next-*): Use m68k.h and nextstep.h.
2018 (m68k-next-nextstep*): New alias for that.
2019 (i*86-*-nextstep*): Use nextstep.h.
2020 (sparc-*-nextstep*): New configuration.
2022 1995-08-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2024 * configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS.
2025 And get CFLAGS from config.h if SPECIFIED_CFLAGS is null.
2027 1995-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2029 * configure.in: Handle sunos4shr by sharing; not like sunos4*.
2030 Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment.
2032 1995-07-18 Mike Long <mike.long@analog.com>
2034 * make-dist: Fix update of finder-inf.el, and byte-compile it.
2036 1995-07-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2038 * Makefile.in (src/paths.h, paths-force):
2039 Rename src/paths.h.in to src/paths.in.
2040 (Makefile): Depend on src/Makefile.in, not src/Makefile.in.in.
2042 * configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in.
2043 Use Makefile.c for intermediate file.
2044 Rename src/config.h.in to src/config.in.
2046 1995-07-17 Richard Stallman <rms@gnu.ai.mit.edu>
2048 * configure.in (mips-dec-ultrix*): Assume version 4.3.
2049 (mips-dec-ultrix4.[12]): New alternative for old versions.
2051 1995-07-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2053 * make-dist: Don't break intra-tree links.
2055 1995-07-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2057 * configure.in: Put back archlibdir initialization. Require
2058 autoconf 2.4.1 or later.
2060 1995-07-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2062 * configure.in: Use sunos4shr normally for Sunos 4.1.[3-9].
2063 (mips-mips-riscos5*): New alternative.
2065 1995-06-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2067 * Makefile.in (uninstall, install-arch-indep): Install info/ediff*.
2069 1995-06-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2071 * configure.in (bindir, datadir, sharedstatedir, libexecdir)
2072 (mandir, infodir, archlibdir): Initializations deleted.
2074 * configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4.
2075 On hpux9shr, use hpux9shxr4.h.
2077 1995-06-24 Morten Welinder <terra+@cs.cmu.edu>
2079 * configure.in: Added target mips-dec-mach_bsd4.3.
2080 * config.guess: Guess mips-dec-mach_bsd4.3.
2082 1995-06-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2084 * Makefile.in (mkdir): Use symbolic chmod.
2086 1995-06-22 Paul Eggert <eggert@twinsun.com>
2088 * configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3.
2089 (Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.)
2091 1995-06-22 Paul Eggert <eggert@twinsun.com>
2093 * Makefile.in (SUBDIR_MAKEFILES):
2094 Add man/Makefile, so `make distclean' removes it.
2095 (top_distclean): Add config.log to the list of files to be removed.
2097 1995-06-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2099 * Version 19.29 released.
2101 1995-06-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2103 * configure.in: Fix the previous change to verify that the -b
2104 option really solves the problem.
2106 * make-dist (nt): Explicitly include makefile.nt and makefile.def only.
2108 1995-06-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2110 * configure.in: Test whether XFree86 needs -b i486-linuxaout to link.
2112 1995-06-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2114 * configure.in: Report more clearly when there is no special
2115 dir to search for X includes or libraries.
2117 1995-06-13 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2119 * configure.in: Check for -lpthreads, not -lpthread.
2121 1995-06-09 Geoff Voelker <voelker@cs.washington.edu>
2123 * make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in.
2125 1995-06-08 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2127 * configure.in: Check for -lpthread.
2129 1995-06-05 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2131 * Makefile.in (install-arch-indep): Install info files for mh-e.
2132 (uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc.
2134 1995-06-01 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2136 * configure.in (*-solaris2.5): New configuration.
2138 * make-dist: Copy new files config.nt and config.w95.
2140 1995-05-30 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2142 * configure.in: Use x_includes, not x_libraries, for -I.
2143 Make bitmapdir a colon-separated list.
2145 1995-05-27 Richard Stallman <rms@gnu.ai.mit.edu>
2147 * configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations.
2149 * configure.in: Allow x_libraries and x_includes to be paths.
2151 1995-05-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2153 * configure.in: Fix typo.
2155 1995-05-24 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2157 * INSTALL: Clarify use of site-init.el.
2159 1995-05-22 enami tsugutomo <enami@sys.ptg.sony.co.jp>
2161 * configure.in: pass arg to sqrt.
2163 1995-05-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2165 * make-dist: Fix May 6 change.
2167 1995-05-17 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2169 * vpath.sed: Delete reference to ymakefile.
2171 1995-05-09 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2173 * configure.in: Use sqrt (more portable) instead of fmod in -lm
2176 1995-05-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2178 * make-dist: Put nt/emacs.ico and nt/emacs.rc in dist.
2180 * update-subdirs: Specify /bin/sh to run the script.
2182 1995-05-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2184 * make-dist: Put src/makefile.nt in dist.
2186 * configure.in (i[345]86-*-bsdi2*): New configuration.
2187 (vax-dec-bsd386*): Deleted.
2189 1995-05-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2191 * configure.in: Make sure CDPATH doesn't mess up PWD check. Check
2192 whether X bitmaps are in X11/bitmaps instead of bitmaps. Use fmod
2193 instead of logb in -lm check.
2195 1995-05-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2197 * configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
2198 Use bsd4-3. Don't set NON_GNU_CPP.
2200 * make-dist: Don't copy in src/s/*.inp. Don't copy nt/src.
2201 In nt. copy various different things, but not *.cmd.
2202 Fix the ln commands for the subdirs of nt.
2204 1995-04-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2206 * configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h.
2208 1995-04-27 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2210 * configure.in (*-sun-sunos4.1.3*): Use shared libraries,
2211 since that's what the header file expects.
2213 1995-04-24 Francesco Potorti` (pot@cnuce.cnr.it)
2215 * configure.in (m68k-motorola-sysv*): Distinguish between 68030
2216 and 68040 based machines when choosing options for gnucc.
2218 1995-04-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2220 * Makefile.in (top_distclean): Delete config.cache.
2222 1995-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2224 * Makefile.in (install-arch-indep): Delete .#* when copying subdirs.
2226 * configure.in: Use m/ncr386.h.
2228 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2230 * Makefile.in (install-arch-indep): Undo Sep 23 change.
2232 1995-04-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2234 * make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore.
2235 (man): Don't copy texindex.c and getopt.c; they're deleted.
2236 (etc): Omit `e'; it's a subdirectory.
2237 (etc/e): Use `../..', not `..', to reference top level.
2239 1995-04-06 Simon Leinen <simon@lia.di.epfl.ch>
2241 * Makefile.in (install-arch-indep, dist):
2242 look for `update-subdir' in $(srcdir).
2244 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2246 * make-dist: Include mkinstalldirs in distribution.
2248 1995-04-05 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2250 * make-dist: Add missing close backquote.
2252 1995-04-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2254 * make-dist: Don't distribute shortnames directory.
2256 1995-03-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2258 * Makefile.in (blessmail): Pass archlibdir to the sub-make.
2260 1995-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2262 * configure.in (m88k-motorola-sysv4*): Use usg5-4-2.
2264 1995-02-23 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2266 * configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args.
2268 1995-02-13 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2270 * configure.in (mips-sgi-irix6): New configuration.
2272 1995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2274 * Makefile.in (maintainer-clean): Renamed from realclean.
2276 1995-02-02 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2278 * configure.in: Create a .gdbinit that sources the real one, if
2279 using a different build directory.
2281 1995-01-23 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2283 * configure.in: Check for sys/select.h.
2285 1995-01-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2287 * configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP.
2289 1994-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2291 * configure.in: Handle isc 4.1 operating system.
2293 1994-12-10 Richard Stallman <rms@kepa>
2295 * configure.in (rs6000-ibm-aix4.1*): New alternative.
2296 (rs6000-ibm-aix4*): New alternative.
2298 1994-12-06 Richard Stallman <rms@kepa>
2300 * configure.in: For SVR4.2, set NON_GNU_CPP if not already set.
2302 1994-11-30 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2304 * configure.in: Don't try to make directories that are guaranteed
2307 1994-11-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2309 * configure.in: Generate man/Makefile from man/Makefile.in.
2310 Create the man subdir.
2312 * Makefile.in (dvi): Run Make in our man subdir.
2314 * make-dist: Create subdir etc/e.
2316 Put man/Makefile.in in dist, instead of man/Makefile.
2318 1994-11-21 David J. MacKenzie (djm@mole.gnu.ai.mit.edu)
2320 * configure.in: Add --with-pop, --with-kerberos, and
2321 --with-hesiod for movemail.
2323 1994-11-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2325 * configure.in (m68*-apollo*): Use s/domain.h.
2327 1994-11-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2329 * configure.in (m68*-apollo*): Set NON_GNU_CPP.
2331 1994-11-14 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2333 * configure.in: Don't add -I, -L, -R options for cc if their
2334 arguments would be empty.
2336 1994-11-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2338 * configure.in (i860-intel-osf1*): New alternative.
2339 (mips-sgi-irix5.[01]*): Distinguish from irix5*.
2340 (mips-sgi-irix*): Now an alias for mips-sgi-irix5*.
2342 1994-11-09 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2344 * configure.in: Make h_errno check not use nested functions.
2346 1994-11-09 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2348 * Makefile.in (install-arch-indep): Delete *.orig in copied dirs.
2350 1994-11-08 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
2352 * Makefile.in (install-arch-indep): Avoid continued comment
2353 swallowing target line.
2355 1994-11-08 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu)
2357 * configure.in: Protect a character class with `changequote'.
2359 1994-11-07 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2361 * configure.in: Accept `news' as a synonym for `newsos'.
2363 1994-11-03 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2365 * Makefile.in: Don't rm files if cd fails.
2367 1994-11-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2369 * make-dist: Put nt subdir and its subdirs in the dist.
2370 (lib-src): Put makefile.nt in the dist.
2371 (lisp): Put makefile.nt in the dist.
2373 1994-10-29 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2375 * configure.in: Change a stray `[' to `test'.
2377 1994-10-28 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2379 * configure.in: Adapt for Autoconf v2. Use the standard argument
2380 parser, host type canonicalizer, X11 finder, and message
2381 printing macros. Use the new macro names. Use `test' instead of `['.
2383 1994-10-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2385 * configure.in: Check for getpagesize.
2387 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2389 * make-dist (msdos): Put sed* in the distribution.
2391 1994-10-17 Morten Welinder <terra@mole.gnu.ai.mit.edu>
2393 * config.bat: New option, `--with-x', for configuring Emacs
2394 for use with the X11 system DesqView/X.
2395 New option, `--no-debug', for compiling Emacs without debug
2396 information thus saving disk space.
2397 (src/config.h, src/paths.h): Use `update' (which is like
2398 `move-if-changed') to change the file.
2399 (src/config.h): When configuring for X11 perform extra changes.
2400 (src/makefile): When configuring for X11 perform extra changes.
2401 (lib-src): Remove temporary files.
2402 (): Check that `sed', `rm', `mv', and `gcc' are available.
2404 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2406 * Makefile.in (sharedstatedir): Substitute sharedstatedir properly.
2408 * configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps.
2410 1994-10-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2412 * configure.in (EMACS_CONFIGURATION): Use $canonical as value.
2414 * configure.in (canonical): Substitute var into makefiles.
2415 (bitmapdir): Likewise.
2417 * Makefile.in (bitmapdir): New variable.
2418 (src/paths.h, paths-force): Edit PATH_BITMAPS.
2420 1994-10-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2422 * make-dist: Put update-subdirs and lisp/subdirs.el in the dist.
2424 * Makefile.in (dist, install-arch-indep): Run update-subdirs.
2425 * update-subdirs: New shell script.
2427 1994-10-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2429 * Makefile.in (top_distclean): Don't rm build-install.
2430 (SOURCES): Delete build-install.in.
2432 * make-dist: Don't distribute build-ins.in.
2433 * build-ins.in: File deleted.
2435 1994-10-12 David J. MacKenzie (djm@duality.gnu.ai.mit.edu)
2437 * Makefile.in (mkdir): Use mkinstalldirs instead of make-path.
2439 1994-10-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2441 * Makefile.in: Use libexecdir and sharedstatedir as appropriate.
2443 * configure.in (libexecdir): Renamed from libdir. New default.
2444 (sharedstatedir): Renamed from statedir. New default.
2445 (datadir): New default.
2447 * make-dist: Don't distribute subdirs.el.
2449 1994-10-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2451 * configure.in (eaccess): Check for it.
2453 1994-10-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2455 * configure.in (mktime): Check for it.
2457 1994-10-02 Paul Reilly <pmr@geech.gnu.ai.mit.edu>
2459 * configure.in (motif): Add support for usage and option checking.
2461 1994-09-24 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2463 * configure.in (utimes): Check for it.
2465 1994-09-23 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2467 * Makefile.in (install-arch-indep): Don't do mkdir here.
2469 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2471 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2472 riscix.h renamed to acorn.h.
2474 1994-09-21 Michael Ben-Gershon (mybg@cs.huji.ac.il)
2476 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2479 1994-09-21 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2481 * configure.in: Remove trailing slashes from srcdir.
2483 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2485 * configure.in (i[345]86-sequent-ptx*): Handle
2487 1994-09-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2489 * Makefile.in (paths-force): Depend on src/paths.h
2491 1994-09-19 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2493 * configure.in (config_options): Save all arguments, not just some.
2495 1994-09-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2497 * Makefile.in (install-arch-indep): Copy DOC-*, not DOC*
2499 * configure.in: Add AC_AIX.
2500 Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT.
2502 1994-09-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2504 * configure.in (parsing options): Simplify sed command to delete -'s.
2506 1994-09-16 Karl Heuer <kwzh@churchy.gnu.ai.mit.edu>
2508 * configure.in (config_options): New shell variable.
2509 Pass its value to C code in EMACS_CONFIG_OPTIONS.
2511 1994-09-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2513 * configure.in (alpha-dec-osf*): New target.
2515 * Makefile.in: Use just one FRC target.
2517 1994-09-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2519 * Makefile.in (removenullpaths, paths-force):
2520 Use name paths.h.tmp$$, which depends on the pid.
2522 1994-09-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2524 * Makefile.in (removenullpaths, paths-force):
2525 Put paths.h.tmp in top-level dir, not in src.
2527 1994-09-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2529 * Version 19.27 released.
2531 1994-09-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2533 * Version 19.26 released.
2535 1994-09-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2537 * configure.in: Check for lrand48, not rand48.
2539 1994-09-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2541 * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5)
2542 (powerpc-ibm-aix*): New aliases.
2544 1994-08-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2546 * make-dist (src/m, src/s): Put *.inp in distribution.
2548 1994-08-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2550 * configure.in: Accept i586 and i486 along with i386.
2552 1994-08-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2554 * configure.in: Do compute unexec, LIBX, system_malloc, etc
2555 even if CPP env var was set by the user.
2557 * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value.
2559 1994-08-14 Jonathan I. Kamens (jik@gza-client1.aktis.com)
2561 * Makefile.in: Uninstall "$(EMACS)", not "emacs".
2563 1994-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2565 * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP.
2567 1994-08-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2569 * configure.in: Check more specifically for i*86-sun-sunos.
2571 1994-08-03 Caveh Jalali (caveh@eng.sun.com)
2573 * configure.in: Handle solaris 2.4.
2575 1994-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2577 * configure.in (rand48): Check for it.
2579 1994-07-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2581 * make-dist: Update the info files.
2583 1994-07-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2585 * configure.in: Make "checking..." messages' style consistent.
2586 (HAVE_H_ERRNO): New test.
2588 1994-07-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2590 * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP.
2592 1994-07-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2594 * configure.in (CFLAGS): If the envvar was specified, use that.
2595 And set REAL_CFLAGS from it too.
2597 1994-07-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2599 * make-dist: Update finder-inf.el.
2601 1994-07-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2603 * make-dist (msdos): Include sed4.inp in dist.
2605 * Makefile.in (libsrc_libs): Var deleted.
2607 1994-07-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2609 * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands.
2611 1994-06-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2613 * configure.in (mips-sony-newsos4*): New alias.
2615 1994-06-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2617 * configure.in (*-convex-bsd*): Set NON_GNU_CPP.
2618 (*-convex-convexos*): Accept this as alias.
2620 1994-06-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2622 * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE,
2623 for two different uses.
2625 1994-06-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2627 * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc.
2629 1994-06-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2631 * make-dist: Put ./BUGS into the distrib.
2633 1994-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2635 * configure.in: Handle 386 running Solaris 2.
2637 1994-06-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2639 * configure.in (mips-siemens-sysv*): Use cpp, not cc -E.
2641 1994-06-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2643 * configure.in (mips-sony-newsos*): Use news-risc.h.
2645 * configure.in: Accept bsdi as opsys, like bsd386.
2647 1994-06-01 Morten Welinder (terra@diku.dk)
2649 * config.bat (src/paths.h): Use sed script msdos/sed4.inp.
2651 1994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2653 * Version 19.25 released.
2655 * make-dist (shortversion): Don't assume another period follows.
2657 1994-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2659 * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd.
2660 (uninstall): Use /bin/pwd.
2662 * Makefile.in (blessmail): Depend on src.
2663 (all): Don't depend on blessmail.
2665 * Makefile.in (src/paths.h): Don't force recomputation.
2666 (paths-force): New target; force recomputation of paths.h.
2667 (all): Depend on paths-force.
2668 (src, lib-src): Depend on src/paths.h.
2670 * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS,
2671 NON_GCC_TEST_OPTIONS.
2673 1994-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2675 * configure.in: Don't insist on subversions for irix.
2677 1994-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2679 * configure.in (hppa*-hp-hpux9shr): Move alternative up.
2681 * configure.in (i[34]86-next-*): New alternative.
2683 1994-05-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2685 * Version 19.24 released.
2687 * configure.in: New config hppa*-hp-hpux9shr*.
2689 1994-05-22 Morten Welinder (terra@tyr.diku.dk)
2691 * config.bat: Doc fix.
2693 1994-05-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2695 * Makefile.in (mostlyclean, clean, distclean, realclean)
2696 (extraclean): Don't act on man subdir if it doesn't exist.
2698 1994-05-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2700 * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars.
2701 Use them to set up CC.
2702 (*-sun-sunos4.1.3): Set them.
2704 1994-05-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2706 * Makefile.in (lib-src): Don't depend on src/paths.h.
2708 1994-05-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2710 * build-ins.in (copydests): Get rid of spurious `-'s.
2712 * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION.
2714 1994-05-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2716 * Version 19.23 released.
2718 * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS
2719 for the Xlib and Xt checks; then restore old CFLAGS.
2721 1994-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2723 * configure.in (HAVE_X11XTR6): Add newline before #if.
2724 Add newline after #endif.
2726 1994-05-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2728 * configure.in (HAVE_X11XTR6): Arrange to define it.
2730 1994-05-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2732 * Makefile.in (install): Depend on blessmail.
2734 1994-05-12 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2736 * configure.in (mips-siemens-sysv*): Put quotes around value
2739 1994-05-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2741 * Makefile.in (TAGS): Use the makefile in src subdir.
2743 1994-05-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2745 * configure.in (opsys): Recognize `gnu'.
2747 1994-05-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2749 * configure.in (using NON_GNU_CPP): Fix test for CPP already set.
2751 1994-05-09 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2753 * configure.in: Remove AC_LANG_C call. Not needed with Autoconf
2756 1994-05-08 Morten Welinder (terra@diku.dk)
2758 * config.bat: Forcibly remove "# " style comments from makefiles.
2760 1994-05-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2762 * Makefile.in (uninstall): When processing lispdir and etcdir,
2763 do nothing unless it exists and is a directory.
2765 1994-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2767 * Makefile.in (install-arch-indep): Do install info/dired-x*.
2768 Merge code in from install-doc.
2769 (install-doc): Merge code back into install-arch-indep.
2770 (install-arch-dep): Don't depend on install-doc.
2772 * configure.in (run_in_place): Don't use pwd for archlibdir and docdir.
2774 1994-05-04 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2776 * configure.in (making src/Makefile and lib-src/Makefile):
2777 Split off the autoconf substitutions and don't pass them thru cpp.
2778 (undefs): Use $canonical as well as $configuration.
2780 * make-dist: Distribute lisp/Makefile.
2782 * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*.
2783 Use lower case names for the s files.
2785 1994-05-03 Morten Welinder (terra@diku.dk)
2787 * config.bat: Added possibility for different file name
2788 transscriptions in lib-src.
2790 1994-05-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2792 * Makefile.in (lib-src): Undo previous change.
2793 (blessmail): New target to run maybe-blessmail in lib-src.
2794 (all): Depend on blessmail.
2796 * Makefile.in (lib-src): Depend on src.
2798 1994-04-30 Paul Reilly (pmr@churchy.gnu.ai.mit.edu)
2800 * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3.
2801 (m88k-dg-dgux5.4R2): dgux5.4R2.
2803 1994-04-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2805 * configure.in (window_system): Restore accidentally deleted code
2806 that uses AC_FIND_X.
2808 * make-dist: Distribute config.bat.
2810 1994-04-29 Morten Welinder (terra@diku.dk)
2812 * config.bat: Corrected the configuration of lib-src
2813 to keep up with configure. Add note about dos version 3
2814 or better needed (djgpp needs that). Add note explaining
2815 that either install in c:/emacs or edit the script.
2816 Don't change to c:/emacs, but assume we're there (to minimize
2817 the number of places to change).
2819 * config.bat: Build-in the first step towards X11 support with
2820 the X11 emulator that exists. At this time it won't work,
2821 and several files are missing.
2823 1994-04-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2825 * configure.in: Use m/hp800.h in place of m/hp9000s800.h.
2826 Don't look for -lresolv.
2828 * Makefile.in (lib-src): Depend on src/paths.h.
2830 1994-04-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2832 * configure.in: Restore deleted AC_SUBST of `configuration'.
2833 Improve error message for bad --with-x-toolkit value.
2835 * configure.in: Define CONFIGURATION in src/config.h
2836 rather than substituting in src/Makefile.in.
2838 1994-04-26 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2840 * Makefile.in (install-doc): New target.
2841 (install-arch-dep): Depend on install-doc.
2842 (mkdir): Create docdir.
2844 1994-04-22 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2846 * configure.in: Test for libresolv.a.
2847 Substitute machfile and opsysfile.
2849 1994-04-22 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2851 * Makefile.in (.PHONY, install): Kill reference to obsolete do-install.
2852 (install-arch-dep): Install under the name $(EMACS).
2854 1994-04-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2856 * configure.in (version): Use entire value of emacs-version.
2857 (mips-siemens-sysv*): New alternative.
2859 1994-04-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2861 * Makefile.in (install-arch-indep): Don't install dired-x*.
2863 1994-04-18 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2865 * configure.in (src/Makefile, lib-src/Makefile): Delete ^L.
2866 Fix definition of $undefs.
2868 1994-04-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2870 * configure.in (window_system): Obey --with-x11=no and --with-x10=no.
2872 * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I.
2874 1994-04-16 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2876 * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE.
2878 1994-04-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2880 * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in
2881 and run it thru cpp, as with src/Makefile.in.
2883 * configure.in: Use AC_SET_MAKE.
2885 1994-04-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2887 * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2.
2889 1994-04-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2891 * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@.
2893 * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes.
2894 (printing the choices): Make the toolkit message unconditional.
2895 (USE_X_TOOLKIT): Use `none', not `no', if none.
2896 (include libsrc_libs): Include config.h, and specify -I for srcdir.
2897 Get rid of temp file foofoo1.
2899 1994-04-13 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2901 * configure.in (CFLAGS): Use shell syntax, not Makefile.
2903 1994-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2905 * configure.in (window_system): If no X, set USE_X_TOOLKIT=no.
2906 (printing the choices): State choice of toolkit.
2907 (libsrc_libs): Recalculate after writing config.h;
2908 then update lib-src/Makefile.
2910 1994-04-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2912 * configure.in: Add sunos4shr as alternative for suns.
2913 Conditionals testing for null $CC were backwards.
2915 1994-04-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2917 * make-dist (msdos): Don't link patch1. Link sed*.inp, not sed.in*.
2919 1994-04-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2921 * configure.in: Handle -isc4.0*.
2923 1994-03-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2925 * configure.in (esix5): Set NON_GNU_CPP.
2927 1994-03-24 Roland McGrath (roland@mole.gnu.ai.mit.edu)
2929 * Makefile.in (thisdir): Nonsensical variable removed.
2930 (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd
2931 back to $thisdir, rather than the directory `this_dir'.
2933 1994-03-17 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2935 * Makefile.in (install-arch-indep): Add missing backslash after a
2938 1994-03-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2940 * Makefile.in (thisdir): New variable.
2941 (install-arch-indep): Go back to thisdir to run INSTALL_DATA.
2943 1994-03-08 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2945 * configure.in: Add freebsd.
2947 1994-03-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2949 * configure.in: Check for fpathconf.
2951 1994-03-02 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2953 * configure.in (with_x_toolkit): Fix typo in previous change.
2955 1994-03-01 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2957 * configure.in: New s-file for rs60000-ibm-aix3.2.5.
2959 1994-02-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2961 * configure.in (with_x_toolkit): Don't allow motif or open-look.
2963 1994-02-24 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2965 * configure.in: Fix value of docdir.
2966 * Makefile.in (install-arch-indep): Install DOC* in docdir.
2968 1994-02-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2970 * configure.in (*-sysv4.1): Set NON_GNU_CPP.
2972 1994-02-22 Karl Heuer (kwzh@geech.gnu.ai.mit.edu)
2974 * configure.in: New variable docdir to control where the docstring
2976 Makefile.in: Use it to initialize PATH_DOC in paths.h.
2978 1994-02-22 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2980 * configure.in: When --run-in-place, don't inherit archlibdir.
2982 1994-02-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2984 * Makefile.in (install-arch-dep, install-arch-indep):
2985 New targets split up former do-install rule.
2986 (do-install): Target deleted.
2988 1994-02-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2990 * configure.in (mips-sony-newsos*): New configuration.
2992 1994-02-14 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu)
2994 * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
2996 1994-02-11 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2998 * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX.
3000 1994-02-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3002 * configure.in: Don't initialize CC.
3004 1994-02-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3006 * configure.in (creating src/Makefile): Also generate -U switches
3007 for symbols in the $configuration value.
3009 * configure.in: Check for sys_siglist being declared in system header.
3011 1994-02-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3013 * configure.in (creating src/Makefile): Delete blank lines
3014 along with lines of whitespace.
3015 (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value.
3017 1994-02-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3019 * configure.in: Get, use, and substitute C_SWITCH_MACHINE
3020 like C_SWITCH_SYSTEM.
3021 (m68*-motorola-sysv*): Set CC. Require cpu type to be m68k or m68000.
3023 1994-02-04 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3025 * configure.in (drem): Check for this function.
3027 1994-02-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3029 * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces.
3030 If CPP was inherited from environment, don't use NON_GNU_CPP.
3031 (NON_GNU_CC): Likewise.
3032 (handling with_gcc): Use explicit if in the `no' case.
3033 (cc_specified): New variable; if set, don't use NON_GNU_CC.
3035 1994-02-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3037 * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP.
3039 1994-02-01 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3041 * configure.in: Check whether fmod exists.
3043 1994-01-31 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3045 * make-dist: Distribute {src,lisp}/ChangeLog.? instead of
3046 {src,lisp}/OChangeLog.
3048 1994-01-22 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3050 * configure.in: Restore Jan 8 and Jan 16 changes. The -U hack is
3051 necessary for proper operation. This code works with the current
3052 released version of Autoconf.
3054 1994-01-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3056 * configure.in (with_x_toolkit): Treat values athena and lucid alike.
3057 (USE_X_TOOLKIT): Define it for all values except `no'.
3059 * configure.in: Undo first Jan 8 change and Jan 16 change.
3061 1994-01-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3063 * configure.in: Handle --with-x-toolkit. Produce lwlib/Makefile.
3064 Substitute USE_X_TOOLKIT as both C macro and Make variable.
3066 * Makefile.in (lwlib/Makefile): New target.
3067 (SUBDIR_MAKEFILES): Depend on lwlib/Makefile.
3068 (clean, mostlyclean, distclean, realclean): Handle lwlib subdir.
3069 (unlock, relock): Handle lwlib subdir.
3071 * Makefile.in: Add some .PHONY targets.
3073 * make-dist: Handle lwlib subdir like oldXMenu subdir.
3075 * lwlib: New subdirectory.
3077 1994-01-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3079 * configure.in: If CPP has a value that is a directory,
3082 1994-01-16 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3084 * configure.in (srcdir_undefs): Add g flag to sed substitution to
3087 1994-01-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3089 * Makefile.in (do-install): Install the dired-x info files.
3091 * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX.
3094 1994-01-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3096 * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs.
3098 1994-01-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3100 * configure.in (creating src/Makefile): Put code inside 2nd arg to
3101 AC_OUTPUT as it should be; hopefully noone will again see fit to
3102 gratuitously break this and not make a change log entry.
3103 Optimized sed processing of Makefile.in and cpp output; now
3104 preserves comments previously removed from the cpp input.
3105 Eliminated temp file for cpp output. Generate -U switches to
3106 undefine all identifiers that appear in the directory name
3107 ${srcdir}; pass these to cpp.
3109 * configure.in (version): Fix sed regexp to match two-elt version
3112 * configure.in: Check for strerror.
3114 1994-01-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3116 * configure.in: Test for bcmp.
3118 1994-01-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3120 * make-dist (tempdir): Put subdir msdos into the distribution.
3122 1993-01-07 Morten Welinder (terra@diku.dk)
3124 * config.bat: New file.
3126 1994-01-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3128 * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS.
3130 1994-01-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3132 * configure.in (m68*-next-*): Don't care about which os is specified.
3133 (i[34]86-*-*): Check for *-nextstop*.
3135 1993-12-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3137 * configure.in: Check for setsid.
3139 1993-12-17 Richard Stallman (rms@srarc2)
3141 * configure.in (*-sun-solaris*): Add special case for Solaris 2.3.
3143 1993-12-15 Richard Stallman (rms@srarc2)
3145 * Makefile.in (mkdir): Make only the lockdir writable.
3147 * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
3149 1993-12-11 Richard Stallman (rms@srarc2)
3151 * Makefile.in (libdir): Use @libdir@.
3153 1993-12-08 Richard Stallman (rms@srarc2)
3155 * Makefile.in (install): Add empty command.
3157 1993-12-04 Richard Stallman (rms@srarc2)
3159 * make-dist: Put man/getopt.c in the dist.
3161 * configure.in (LIBS): Add test for existence of XSetWMProtocols.
3163 * Makefile.in (install): Depend on ${SUBDIR}, not `all'.
3165 1993-12-03 Richard Stallman (rms@srarc2)
3167 * configure.in (solaris): Set NON_GNU_CPP instead of CPP.
3168 Set it for all solaris versions.
3169 (mips-mips-riscos4*): Set NON_GNU_CC, not CC.
3170 (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP.
3171 Likewise for NON_GNU_CC and CC.
3173 1993-12-01 Richard Stallman (rms@srarc2)
3175 * configure.in (mips-mips-riscos4*): Assign variable CC.
3176 (checking ${with_gcc}): If "no", don't override CC if already set.
3177 (CC): Initialize it as empty.
3179 1993-11-30 Richard Stallman (rms at srarc2)
3181 * configure.in (Suns): Set CPP if *-solaris2.3*.
3183 1993-11-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3185 * Version 19.22 released.
3187 * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs.
3189 1993-11-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3191 * make-dist: When breaking links, use cp -p.
3192 Copy install.sh into distribution.
3193 Move the temp dir up into the parent dir;
3194 don't leave the staging dir make-dist.tmp... in existence.
3195 * install.sh: New file.
3197 1993-11-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3199 * configure.in (i[34]86-ncr-sysv*): New specific alternative.
3201 1993-11-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3203 * configure.in (version): When --run-in-place, exclude
3204 ${datadir}/emacs/site-lisp from locallisppath.
3206 1993-11-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3208 * configure.in: Delete jumk.c before writing it.
3210 1993-11-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3212 * Version 19.21 released.
3214 * Makefile.in (mkdir): Ignore error from chmod.
3216 1993-11-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3218 * make-dist: Don't put lisp/forms.README in the distribution.
3220 1993-11-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3222 * configure.in (creating src/Makefile): Before running cpp,
3223 discard all lines that start with `# Generated' or /**/#.
3225 1993-11-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3227 * Version 19.20 released.
3229 * make-dist: Use build-ins.in, not build-install.in.
3230 Don't bother updating TAGS since it's not included.
3232 * build-ins.in: Renamed from build-install.in.
3234 1993-11-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3236 * make-dist: Don't try to link *.texinfo--there are none now.
3237 When running make in lib-src, specify YACC var value.
3239 1993-10-03 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3241 * configure.in (extrasub): Add vpath patterns for %.[yls].
3243 * configure.in: Don't do seddery on config.status after AC_OUTPUT.
3244 Instead just include the commands to make src/Makefile as the
3245 second arg to AC_OUTPUT.
3247 * configure.in: Use : instead of dnl for comment inside
3250 * configure.in: No longer use vpath_sed. Instead, when we notice
3251 srcdir already configured, set extrasub to hack vpath in the
3254 * configure.in: In cmds to make src/Makefile, chmod Makefile.new
3256 * Makefile.in (VPATH): Define to @srcdir@.
3258 1993-09-28 Brian Fox (bfox@cubit)
3260 * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
3261 doesn't exist. Just copy src/Makefile.in instead. Touch
3262 all of the Makefiles after editing config.status.
3264 * INSTALL: Update documentation to match new configuration
3267 1993-09-27 Brian Fox (bfox@ai.mit.edu)
3269 * configure.in: Allow any of the path or directory Makefile
3270 variables to be set with flags to configure. Create all Makefiles
3271 at configure time. Edit special commands into config.status after
3272 src/Makefile.in is built from src/Makefile.
3274 * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile):
3275 If these files are out of date, simply have config.status
3276 rebuild them; don't rebuild them explicitly.
3278 1993-09-25 Brian Fox (bfox@ai.mit.edu)
3280 * build-install.in: Change src/xemacs to src/emacs. We no longer
3281 create src/xemacs, so the file wouldn't be found.
3283 * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'.
3285 1993-09-24 Brian Fox (bfox@albert.gnu.ai.mit.edu)
3287 * configure.in: Avoid forcing the search of /usr/include before
3288 fixed include files by resetting C_SWITCH_X_SITE if it is
3291 1993-09-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3293 * Makefile.in (@rip_paths@locallisppath):
3294 Delete ${datadir}/emacs/site-lisp.
3296 1993-09-15 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3299 Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value.
3300 Remove ${extra_output} from AC_OUTPUT call.
3302 1993-09-17 Brian Fox (bfox@inferno)
3304 * make-dist: Quote backquotes found in strings to be echoed.
3306 * configure.in: Use "sh -c pwd" when we want to avoid having the
3307 shell fix up the value of $PWD.
3309 1993-09-13 Brian Fox (bfox@inferno)
3311 * Makefile.in (do-install): Don't abort if ln or chmod at the end
3312 of the installation fail. Suggested by Karl Berry.
3314 1993-08-30 Brian Fox (bfox@inferno)
3316 * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make"
3317 was used. Set MAKEFLAGS from MFLAGS.
3319 1993-09-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3321 * configure.in: Test for res_init in libc.
3323 1993-09-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3325 * configure.in: In the file ${tempcname}, use configure___
3326 instead of @configure@.
3328 1993-09-12 Roland McGrath (roland@sugar-bombs.gnu.ai.mit.edu)
3330 * make-dist: Dist vpath.sed
3332 * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile):
3333 Depend on vpath.sed.
3334 Replace sed comand for VPATH with @vpath_sed@.
3336 * configure.in: Substitute variable `vpath_sed'.
3337 If not in $srcdir and $srcdir is configured,
3338 issue warning that GNU make is required,
3339 and set vpath_sed to use vpath.sed script.
3341 1993-09-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3343 * configure.in: Remove check for $srcdir being configured. This
3344 pretty much works now.
3345 Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
3346 Check for XFree86 (/usr/X386/include) independent of whether
3349 * Makefile.in (info, dvi, clean, mostlyclean, distclean,
3350 realclean, unlock, relock): Use `$(MAKE)' in place of plain
3353 1993-08-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3355 * Version 19.19 released.
3357 * configure.in (i386-*-sunos4): Assume Sunos 4.0.
3359 1993-08-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3361 * configure.in: Check for XScreenNumberOfScreen.
3363 1993-08-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3365 * configure.in: Add * to end of all configuration alternatives.
3366 (m68*-sony-newsos3*): New alternative.
3368 1993-08-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3370 * make-dist: Include getdate.c in distribution.
3372 * configure.in: For --help, use $PAGER if it is set.
3373 (LIB_X11_LIB): Default to -lX11.
3374 (mips-sgi-irix5.*): New alternative.
3376 * Makefile.in (do-install): Install info/gnus* and info/sc*.
3378 * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*):
3379 Recognize *.B8.* as hpux version 8.
3380 (m68*-tektronix-bsd*): Fix typo in tek4300.
3381 (AC_HAVE_FUNCS): Add ftime.
3383 1993-08-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3385 * configure.in (m88k-tektronix-sysv3*): Added the missing *.
3386 Use tekxd88, not tekXD88.
3388 1993-08-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3390 * configure.in: Check for -lm. Then can check for frexp and logb.
3392 1993-08-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3394 * Version 19.18 released.
3396 * make-dist (src): Don't put gnu-hp300 in dist.
3397 (src, lisp): Include OChangeLog in dist.
3399 1993-08-08 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3401 * configure.in: Test for presence of logb and frexp functions.
3403 1993-08-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3405 * configure.in (machine): Add i370-ibm-aix*.
3407 1993-08-03 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3409 * configure.in (function checks): Test for mkdir and rmdir.
3411 * configure.in (function checks): Don't test for random and bcopy
3412 only when we're building with X; look for them all the time.
3414 1993-07-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3416 * configure.in: Test for availability of bcopy functions, searching
3417 the X libraries if we're using X.
3419 * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp,
3420 and #define HAVE_AIX_SMT_EXP if we do. This is present in some
3421 versions of AIX, and needs to be passed to the loader.
3423 * configure.in: Test for the availablility of the
3424 XScreenResourceString function.
3426 1993-07-30 David J. MacKenzie (djm@frob.eng.umd.edu)
3428 * configure.in: If we found X on our own, set C_SWITCH_X_SITE and
3429 LD_SWITCH_X_SITE and assume --with-x11.
3430 Only look for X11 files if we weren't told about a window system
3431 or if we were told to use X11 but not told where.
3432 Search the libraries from the s and/or m files when checking for
3435 * configure.in: Remove any trailing slashes in prefix and exec_prefix.
3437 1993-07-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3439 * make-dist: Include lisp/dired.todo in the distribution.
3441 1993-07-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3443 * configure.in: Add code to set HAVE_INET_SOCKETS.
3445 1993-07-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3447 * configure.in: If we do find x_includes and x_libraries
3448 via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE.
3450 1993-07-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3452 * make-dist: Include src/gnu-hp300 in the dist.
3454 * configure.in (canonical): New variable holds the canonicalized
3455 configuration. Don't alter `configuration'. Use `configuration'
3456 for Makefile.in for file naming.
3457 (testing x_includes and x_libraries): Use =, not ==.
3459 1993-07-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3461 * Version 19.17 released.
3463 * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src
3464 directory's makefile. This allows the invocation of CPP which
3465 builds xmakefile to receive these switches. The SunSoft C
3466 preprocessor inserts spaces between tokens if it doesn't get the
3467 -Xs flag requested in src/s/sol2.h.
3469 1993-07-12 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
3471 * configure.in (m68k-bull-sysv3): new config.
3473 1993-07-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3475 * configure.in: Use the autoconf AC_FIND_X macro to try to find
3476 the X Windows libraries.
3478 1993-07-07 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3480 * make-dist (tempdir): Don't create lisp/forms-mode directory in
3481 the distribution. Those files aren't kept in their own
3482 subdirectory any more.
3484 1993-07-06 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3486 * Version 19.16 released.
3488 1993-06-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3490 * configure.in: Add --verbose flag.
3492 1993-06-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3494 * version 19.15 released.
3496 1993-06-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3498 * Makefile.in (top_distclean): Use -f switch when cleaning out
3499 lock dir; it might be empty.
3501 * configure.in: Only check for -lXbsd once.
3503 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3505 * Version 19.14 released.
3507 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3509 * make-dist: If using gzip, create distribution with '.gz' extension.
3511 * make-dist (lisp/term): This doesn't have a ChangeLog anymore.
3512 (lisp/forms-mode): This doesn't exist anymore.
3514 * configure.in: Look for the closedir function.
3516 1993-06-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3518 * configure.in (CPP): Autoconf sets this to a shell variable
3519 reference, which doesn't work when it's edited into a makefile.
3520 Expand that variable reference.
3522 * Makefile.in (CPP): New variable.
3523 (src/Makefile): Edit CPP into src/Makefile.
3525 * Makefile.in (src/Makefile): Don't bother exiting single quotes
3526 and entering double quotes to get the values of LD_SWITCH_X_SITE
3527 and the other make variables; make substitutes them in anyway.
3529 * Makefile.in (uninstall): Don't remove the lisp and etc
3530 directories if they're in the source tree.
3532 Bring mumbleclean targets into conformance with GNU coding standards.
3533 * Makefile.in (mostlyclean, clean): Separate these two; just have
3534 them pass the request to the subdirectory makefiles.
3535 (distclean): Pass the request down, and then get rid of the
3536 files configure built, and get rid of the Makefiles.
3537 (realclean): Pass the request down, and then do the same things
3539 (uninstall, info, dvi): New targets.
3541 * configure.in: Move clause for PC-compatible i386 box to the end
3542 of the case statement, to avoid masking configurations below.
3544 * configure.in: Add case for m88k-motorola-sysv4.
3546 * configure.in: Add support for HP/UX versions 7, 8, and 9 on
3547 the HP 68000 machines.
3549 * configure.in: Put the arguments to LD_SWITCH_X_SITE's and
3550 C_SWITCH_X_SITE's -L and -I switches in quotes, so the
3551 preprocessor won't fiddle with them.
3553 1993-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3555 * Makefile.in (TAGS): cd to src to run etags.
3557 1993-06-12 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3559 * configure.in (version): Check the X libraries for XrmSetDatabase
3560 and random, and see if we have -lXbsd.
3562 1993-06-11 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3564 * configure.in: Pass "-Isrc" to the CPP we run to examine the
3565 s/*.h and m/*.h files. Martin Tomes
3566 <mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it.
3568 1993-06-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3570 * configure.in: Move i386-prime-sysv* and i386-sequent-bsd*
3571 above the general i386 alternative.
3573 1993-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3575 * configure.in: Recognize configuration name for Data General
3578 * configure.in: Use AC_LONG_FILE_NAMES.
3580 1993-06-09 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3582 * configure.in: Test for bison.
3583 * Makefile.in (YACC): New variable.
3584 (lib-src/Makefile.in): Edit YACC into the makefile.
3586 1993-06-08 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3588 * Version 19.13 released.
3590 * configure.in (CFLAGS): Don't set this according to the value of
3591 the GCC shell variable. Instead, consult the machine and system
3592 files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and
3593 test __GNUC__ while we're at it.
3595 * configure.in: Remove extra ;; from hpux cases.
3597 1993-06-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3599 * configure.in: Check to see if the system has -ldnet.
3601 1993-06-08 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3603 * make-dist: Add clauses to distribute lisp/forms-mode.
3605 1993-06-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3607 * configure.in (machine): Fix the versions in hpux version number test.
3608 Do not guess based on cpu type. Do check for explicit system version.
3610 1993-06-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3612 * configure.in: Do NOT look for `unknown' as company name.
3614 1993-06-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3616 * configure.in: Fix typo in message.
3618 1993-06-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3620 * Version 19.12 released.
3622 * Makefile.in (do-install): Correct previous etc-copying change.
3623 Partially rewrite using `if'.
3624 (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE.
3626 * Version 19.11 released.
3628 * configure.in: Handle 386bsd.
3630 1993-05-31 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3632 * make-dist: Update getdate.c.
3634 * configure.in: Handle bsd386.
3636 * Makefile.in (do-install): Use `-' in tar options.
3638 * configure.in: Change ! "${...}" to x"${...}" = x.
3640 * Makefile.in (do-install): Copy the DOC-* files from the build
3641 etc directory, as well as lots of things from ${srcdir}/etc.
3643 * make-dist: Copy config.guess.
3645 * configure.in: Handle AIX versions 1.2, 1.3.
3647 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3649 * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add
3650 the configuration name mips-mips-usg* to represent USG systems.
3652 * configure.in: Fix logic to detect if srcdir is already configured.
3654 * Makefile.in: Pass in LD_SWITCH_X_SITE.
3656 * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd
3657 foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name
3658 of a directory; cd might fail, and have pwd print out the current
3661 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3663 * configure.in: When looking for sources, use '.', not `.`. Also '..'.
3665 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3667 * configure.in: Complain if srcdir points at an already-configured
3670 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3672 * Version 19.10 released.
3674 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3676 * Makefile.in: Use Makefile comments, not C comments.
3678 * configure.in: Add case for the Tektronix XD88.
3680 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3682 * configure.in: Handle sysv4.2 and sysvr4.2.
3684 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3686 * configure.in: Traverse the argument list without destroying it;
3687 don't use shift. It turns out that "set - ${saved_arguments}"
3688 doesn't work portably.
3690 * configure.in: Add missing "fi".
3692 * make-dist: Rebuild configure if configure.in is newer.
3694 * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src
3695 targets to be executed even if make remembers that it has already
3698 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3700 * Makefile.in (do-install): Delete redundant code to copy etc twice.
3702 * configure.in (romp): Handle various version numbers with aos and bsd.
3704 1993-05-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3706 * configure.in: Fix message text.
3708 1993-05-28 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3710 * make-dist: Make a `site-lisp' directory in the distribution,
3711 instead of a `local-lisp' directory, which hasn't been the
3712 appropriate name for a long time.
3713 * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory
3714 from the distribution first, then /usr/local/lib/emacs/site-lisp.
3716 * Makefile.in (do-install): Correctly detect if ./etc and
3717 ${srcdir}/etc are the same.
3719 * configure.in: Extract UNEXEC from the system configuration
3720 files, compute the name of the source file corresponding to the
3721 object file, and #define it as UNEXEC_SRC in config.h.
3723 * configure.in: If srcdir is '.', then try using PWD to make it
3726 * configure.in: Include ${srcdir} in the printed report, to help
3727 people notice if it's an automounter path.
3729 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3731 * configure.in (prefix): Don't run pwd on srcdir unnecessarily.
3733 1993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3735 * Makefile.in (do-install): Delete the dest dir, not the source dir,
3736 when they are different. Add `shift' command.
3737 (COPYDESTS, COPYDIR): Delete external-lisp dir.
3738 (externallispdir): Var deleted.
3740 * configure.in: Delete spurious paren outputting short_usage.
3742 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3744 * Version 19.9 released.
3746 1993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3748 * Makefile.in (${SUBDIR}): Pass the value of the make variable to
3751 * make-dist: Check for .elc files with no corresponding .el file.
3753 * Makefile.in (mkdir): Make all the directories in locallisppath.
3755 * config.guess: New file.
3756 * configure.in: Use it, tentatively.
3757 * INSTNALL: Mention its usage.
3759 * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
3760 the former gives you the operating system rev directly. Use
3761 s/hpux.h if we don't recognize what we got.
3763 * Makefile.in (do-install): Don't remove a destination directory
3764 if it's the same as the source. If ${srcdir}/info == ${infodir},
3765 don't try to copy the info files.
3767 * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this
3768 doesn't work if you're not using a separate source directory.
3769 (do-install): Copy the build tree's etc directory only after
3770 making sure it's not also the source tree's etc directory.
3772 1993-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3774 * configure.in: Handle sunos4.1.3 specially.
3776 1993-05-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3778 * Makefile.in (INSTALL): Add definition.
3780 * configure.in: Fix some messages. Support -with-gnu-cc.
3781 At the end, use `set --', not `set -'.
3782 Delete spurious `.h' in hpux alternatives.
3784 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3786 * Version 19.8 released.
3788 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3790 * configure.in: When looking for source in the same directory as
3791 the configure script, make the path thus discovered absolute.
3792 If the user specifies the `--srcdir' switch, make that directory
3795 * Makefile.in (srcdir): Remove comment saying this doesn't work.
3797 * Makefile.in (src/paths.h): Edit the `infodir' variable into this
3798 too, as the value of the PATH_INFO macro.
3800 * configure.in: Check to see if the source lives in the same
3801 directory as the configure script.
3803 1993-05-24 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3805 * Makefile.in (install): Split this into `install' and
3806 `do-install', to give people more control over exactly what gets
3808 (do-install): New target, containing the guts of `install'. Don't
3809 remove and recreate the directories inside the copying loop - do
3810 it all before the copying loop. Pass more flags to the lib-src
3812 (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
3813 avoid errors and warnings.
3815 * configure.in: For generic IBM PC boxes, insist on "unknown" for
3816 the manufacturer - the more general case was blocking other i386
3817 configuration names below, and that's how the names are written in
3820 * make-dist: When breaking links, remove the link before moving
3821 the copy onto it, to avoid interactive behavior.
3823 * Makefile.in: Doc fix.
3825 * configure.in: Doc fix.
3827 * INSTALL: Mention --exec-prefix option.
3829 * configure.in: Add support for the `--exec-prefix' option.
3830 * Makefile.in: Accept that support.
3832 * configure.in: Use the AC_PROG_INSTALL macro.
3833 * Makefile.in (INSTALL): Variable removed.
3834 (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure.
3836 * configure.in: Distinguish between hp800's and hp700's by calling
3839 1993-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3841 * configure.in: Recognize configuration names for i860 boxes
3844 1993-05-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3846 * configure.in: Distinguish between hp800's and hp700's by the
3847 version of HP/UX they run, since that's something people are more
3848 likely to know - hp700's run 8.0.
3849 Add HP 700 configuration.
3851 * configure.in: Test for the presence of the `rename' function.
3853 * Makefile.in (C_SWITCH_X_SITE): New variable - get this from
3855 (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this.
3857 * make-dist: Break intra-tree links.
3859 * configure.in: Explain that this is an autoconf script, and give
3860 instructions for rebuilding configure from it. Arrange to put
3861 comments in configure explaining this too.
3863 * configure.in: Make the first line of the configure script be
3864 "#!/bin/sh". Leaving the first line blank didn't work.
3866 * configure.in (long_usage): Removed; made short_usage describe
3867 the options briefly.
3869 * configure.in: Implement the --prefix option.
3870 * Makefile.in (prefix): Add support for it here.
3871 * INSTALL: Document it here.
3873 * Makefile.in (install): Don't assume that the files in the `info'
3874 subdirectory match *.info. They don't have that prefix.
3876 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3878 * configure.in: Add case for version 5 of Esix.
3880 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3882 * Version 19.7 released.
3884 * make-dist: There aren't any *.com files in lib-src anymore.
3886 * make-dist: Copy texinfo.tex and texindex.c, rather than linking
3887 them; they're symlinks to other filesystems on the GNU machines.
3889 * make-dist: Check that the manual reflects the same version of
3890 Emacs as stated in lisp/version.el. Edit that version number into
3893 1993-05-21 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3895 * configure.in: Remove the hack of AC_DEFINE; use
3898 1993-05-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3900 * make-dist: Don't distribute precomp.com, compile.com, or
3901 link.com from ./src; they're in ./vms now.
3903 Some time-handling patches from Paul Eggert:
3904 * configure.in: Add AC_TIMEZONE.
3906 1993-05-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3908 * configure.in: Recognize Linux as a valid operating system for
3911 1993-05-18 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3913 * make-dist: Distribute some VMS files we got from Richard Levitte.
3915 * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as
3916 the source for the sed command, not oldXMenu/Makefile.
3918 1993-05-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3920 * INSTALL: Don't claim the srcdir option doesn't work.
3922 1993-05-16 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3924 * configure.in: Include remarks saying what order the autoconf
3925 tests should go in, and remind people to change config.h.in
3926 whenever they add autoconf tests which make #definitions.
3928 * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile.
3930 1993-05-15 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3932 * Makefile.in (oldXMenu/Makefile): Make this depend on
3933 ${srcdir}/oldXMenu/Makefile.in, not itself.
3935 * PROBLEMS: Some updates from David J. Mackenzie.
3937 More changes from David J. Mackenzie.
3938 * Makefile.in (install.sysv, install.xenix, install.aix): Targets
3939 removed; autoconf and config.h should specify all these
3941 (buildlisppath): Make this path depend on ${srcdir}.
3942 (INSTALLFLAGS): Removed.
3943 (INSTALL): Include the -c flag.
3944 (install): Change the way we invoke install accordingly.
3946 Install ${srcdir} changes from DJM.
3947 * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this
3949 (COPYDIR, COPYDESTS): Install files from both the etc directory in
3950 the source tree and the etc directory in the object tree.
3951 (${SUBDIR}): Pass the prefix variable down to submakes.
3952 (everywhere): Use `sed', not `/bin/sed'. Not all systems have sed
3954 (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in
3955 values for srcdir and VPATH.
3956 (install): Add `v' flag to tar command. Make sure that `dir'
3957 exists in ${srcdir}/info before copying it. Remember that the man
3958 pages come from the source tree, not the object tree.
3959 * configure.in: Remove remarks saying that the --srcdir option
3961 Create the etc directory in the object tree.
3962 Recognize configuration names of the form *-sun-solaris*.
3963 Recognize sunos5 and solaris as operating system names.
3965 * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for
3966 lib-src/getdate.y and src/systime.h.
3968 1993-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3970 * make-dist: Make links in info subdir.
3972 1993-05-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3974 * configure.in: Call AC_STDC_HEADERS.
3976 1993-05-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3978 * configure.in: Sidestep autoconf's quoting of the second argument
3979 of AC_DEFINE, so we can specify the value to put there. It would
3980 be nice if autoconf provided some way to specify computed values
3983 1993-05-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3985 * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
3986 this is always just -DHAVE_CONFIG_H.
3988 The GNU coding standards specify that CFLAGS should be left for
3990 * Makefile.in (CFLAGS): Let configure determine the default value
3992 have it default to DEFS.
3993 (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
3994 (lib-src/Makefile, src/Makefile): Edit the default value for
3995 CFLAGS into these files, not DEFS.
3996 * configure.in (CFLAGS): Choose a default value for this - "-g"
3997 normally, or "-g -O" if we're using GCC. Edit it into the
4000 * configure.in: When scanning the machine and system description
4001 #include files, write their names to conftest.c properly.
4003 1993-05-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4005 * configure.in: In configuration name case for Apallos running
4006 Domainios, set opsys, not opsysfile.
4008 * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce
4009 src/config.h, instead of AC_OUTPUT; the latter overwrites
4010 src/config.h even when it hasn't changed, puts a makefile-style
4011 comment at the top even though it's C code, and produces a
4012 config.status script which doesn't do the job right.
4014 * configure.in: Add AC_LN_S test, so we can tell whether or not we
4015 can use a symbolic link to get the X Menu library into src.
4016 * Makefile.in (LN_S): New variable.
4017 (src/Makefile): Edit the value of LN_S into this makefile.
4019 1993-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4021 * configure.in: Support *-sco3.2v4* as opsystem.
4023 * make-dist: Don't include calc directory.
4024 Exclude many files in the man directory; copy a few.
4026 1993-05-04 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4028 * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and
4029 call AC_STRUCT_TM to see what's in time.h.
4031 * configure.in: Employ quoting stupidity to get the value of CPP
4034 1993-04-27 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4036 * configure.in: Use the AC_PROG_CPP macro, and then use the CPP
4037 variable to scan the machine and system description files.
4039 * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h,
4040 so that getdate.y builds correctly.
4042 1993-04-26 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4044 * configure.in (tempcname): Change this to "conftest.c", so it will
4045 work properly on systems with short filenames; this is the name
4048 * configure.in: Also detect the availability of dup2 and
4051 * configure.in: Use the AC_ALLOCA test.
4052 * Makefile.in (ALLOCA): New variable, to be set by ./configure.
4053 (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
4055 1993-04-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4057 * make-dist: Distribute configure, as well as configure.in.
4060 1993-04-23 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4062 * Makefile.in (install): Print out the name of the directory we're
4063 copying, so people can have some idea of whether we're making
4066 * Makefile.in (install.aix, install.xenix, install.sysv, install):
4067 Don't forget to re-create the COPYDESTS directories after we clear
4070 1993-04-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4072 * Makefile.in: Add autoconf cookies so that the configure
4073 script can comment out sections of path variable definitions to
4074 choose between the installable configuration and the run-in-place
4076 * configure.in: Add new option `--run-in-place', to select the
4077 run-in-place path definitions.
4079 * configure.in: Add a clause to the big configuration name case
4080 for the NeXT machine.
4082 1993-04-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4084 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4085 Make sure that each source directory exists, and is different from
4086 the destination directory; then, delete the destination before
4087 copying over the source.
4089 * make-dist: Distribute configure.in, instead of configure.
4091 1993-04-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4093 * configure.in: Don't set CC to "gcc -O" if the user specifies
4094 `--with-gcc'. Add -O to DEFS if GCC is set.
4096 1993-04-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4098 * Makefile.in (clean mostlyclean): Missing right paren.
4100 * configure.in: When checking for X windows, search for an X11
4101 subdirectory of ${x_includes}.
4103 * configure.in: Check for gettimeofday function, for getdate.y.
4105 Change `configure' to a mixture of custom code and autoconf stuff.
4106 autoconf can't derive all the information we need, but we'd really
4107 like to be able to take advantage of some of its tests, and its
4108 file-editing facilities.
4109 * configure.in: Renamed from configure.
4110 Quote the sections of shell script we want copied literally to
4111 the configure script.
4112 (compile): Initialize this to make the autoconf macros' code happy.
4113 Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
4114 code to do their jobs.
4115 Use autoconf to produce Makefile and src/config.h.
4116 Remove the Makefile-style comment that autoconf places at the top
4118 (config_h_opts): Removed - no longer necessary.
4119 * Makefile.in (configname): Renamed to configuration.
4120 (CONFIG_CFLAGS): Renamed to DEFS.
4121 (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
4122 get values via autoload @cookies@.
4123 (libsrc_libs): Get this from autoconf. We used to do nothing
4125 (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
4127 * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
4128 echo the move-if-change command.
4130 1993-04-08 Jim Blandy (jimb@churchy.gnu.ai.mit.edu)
4132 * make-dist: Distribute lib-src/rcs-checkin.
4134 * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms.
4135 Don't try to make links to the RCS or Old subdirectories.
4136 Use the appropriate extension for the compression type in use.
4137 Create the tar file in the shell's initial default directory, not
4139 Erase the whole ${tempparent} tree, not just ${tempdir}.
4141 1993-03-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4143 * Makefile.in (src/paths.h): Don't echo the huge sed command we
4144 use to build paths.h.
4145 (lib-src/Makefile, src/Makefile): Similarly.
4147 * configure: Extend test for working `const' keyword to handle AIX
4150 1993-03-24 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4152 * make-dist: Distribute lisp/term/ChangeLog.
4154 Arrange for C compilation throughout the tree to get
4155 C_SWITCH_SYSTEM from the configuration files.
4156 * configure: Extract C_SWITCH_SYSTEM from the machine and
4157 system-dependent files, and save it in the top-level Makefile.
4158 * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit.
4159 (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile.
4161 * make-dist: Include the VMS support files in oldXMenu in the
4164 * configure: Doc fix.
4166 * configure: Fix corrupted config_h_opts.
4168 * configure: Properly report option names in error messages.
4170 * configure: Properly recognize --x-includes and --x-libraries
4173 * configure: Fix syntax errors in code handling XFree386.
4175 1993-03-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4177 * configure: Add special code to detect XFree386, and tell
4180 * configure: Properly handle extracting values of LIBS_MACHINE and
4181 LIBS_SYSTEM that contain spaces.
4183 * configure: Add `--x-includes' and `--x-libraries' options. I
4184 think these are dopey, but no less than three alpha testers, at
4185 large sites, have said they have their X files installed in odd
4186 places. Implement them by setting C_SWITCH_X_SITE and
4187 LD_SWITCH_X_SITE in src/config.h.
4189 1993-03-22 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4191 * make-dist: Don't distribute etc/Old files.
4193 * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their
4196 1993-03-20 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4198 * make-dist: Fix typo.
4200 1993-03-19 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4202 * make-dist: Corrected typo, fixed it to discard = and TAGS files
4203 in some cases where it should but didn't seen to.
4205 * Makefile.in: Added unlock and relock productions.
4207 1993-03-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4209 * make-dist: Add a --compress option to force make-dist to use
4212 * make-dist: Use gzip, if we can find it.
4214 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4215 make rs6000-ibm-aix default to -aix32.
4217 1993-03-17 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4219 * Makefile.in: Added `Developer's configuration' section.
4221 1993-03-17 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4223 * Makefile.in: Add commented-out variable settings for developer's
4226 1993-03-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4228 * make-dist: Distribute `src/bitmaps' too.
4230 1993-03-14 Charles Hannum (mycroft@hal.gnu.ai.mit.edu)
4232 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4233 make rs6000-ibm-aix default to -aix32.
4235 1993-03-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4237 * configure: Recognize strings like "sysvr0" or "sysvr1" as System V.
4239 * Makefile.in (install.sysv): Add a second `$' in front of
4240 `${dest}', so that the shell will expand it, instead of Make.
4242 * configure: When processing the name of the configure script,
4243 collapse `././' to `./', but leave a single `./' prefix alone.
4245 * configure: Doc fix.
4247 1993-03-04 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4249 * configure: Handle isc3.0 correctly.
4251 1993-02-25 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4253 * make-dist: Don't try to copy the COPYING notice into
4254 external-lisp; we're not distributing that directory any more.
4256 1993-02-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4258 * Makefile.in (install, install.aix, install.xenix, install.sysv):
4259 Remove CVS subdirectories from the installed directory trees, as
4260 well as RCS directories.
4262 1993-02-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4264 * make-dist: Only copy gmalloc.c if we couldn't link it.
4265 Don't try to copy man/{README,Makefile} unless they actually exist.
4267 * Makefile.in (lisppath): Don't include externallispdir in this.
4268 We're not sure whether we're even going to distribute the
4271 1993-02-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4273 * make-dist: Don't distribute the external-lisp directory anymore.
4274 * INSTALL: Remove all references to external-lisp.
4276 * configure: Detect whether the compiler supports `const'
4277 properly, and edit src/config.h accordingly.
4279 * configure: Tweak layout of final report.
4281 * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not
4284 * Makefile.in (locallisppath): Make this default to
4285 ${datadir}/emacs/site-lisp, instead of
4286 ${datadir}/emacs/local-lisp. ${datadir} and ${statedir} are often
4287 the same thing, and local-lisp causes completion conflicts with
4289 (lisppath): Add ${externallispdir} to this.
4290 * INSTALL: Adjust installation directions.
4292 * Makefile.in (externallispdir): New variable, to say where to
4293 install the externally-maintained lisp files.
4294 (COPYDIR, COPYDESTS): Copy the external lisp directory just like
4296 * INSTALL: Describe external-lisp and the new externallispdir
4299 1993-02-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4301 * configure (progname): New option `--with-gcc'. Make it clearer
4302 how we are trying to guess whether or not we have GCC.
4303 * INSTALL: Document the `--with-gcc' option, and improve
4304 description of `--with-x' options.
4306 1993-02-06 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4308 * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and
4309 ${infodir} from these variables; we have written out explicit code
4310 to install the info files.
4312 1993-01-25 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4314 * make-dist: Don't distributed the RCS files in the etc directory.
4316 1993-01-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4318 * Makefile.in: Some makes can't handle comments in the middle of
4319 commands; move them to before the whole rule.
4321 1993-01-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4323 * README: Mention what Emacs is.
4325 1993-01-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4327 * make-dist: Include `./lisp/calc-2.02' in the distribution.
4328 Add `./cpp' and `./man' back into the distribution.
4330 1993-01-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4332 * Makefile.in: Define MAKE, and use where appropriate.
4334 1993-01-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4336 * make-dist: Remember that the authoritative COPYING notice is
4337 `etc/COPYING', not `../etc/COPYING'.
4339 1992-12-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4341 * make-dist: Make sure that the COPYING notices in each directory
4342 are copies, not symlinks.
4344 1992-12-19 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4346 * INSTALL: The build process produces an executable called `emacs'
4347 now. Change references.
4348 * Makefile.in: Adjust `install.mumble' targets to install
4349 `src/emacs', not `src/xemacs'.
4351 * configure: Start with a blank line; this keeps some old CSH's
4352 from thinking it's a CSH script. Most systems will just use
4353 /bin/sh to run it, which is what we're expecting; the only other
4354 shells which might try to interpret it themselves are probably
4357 1992-12-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4359 * INSTALL: Improvements suggested by David Mackenzie.
4361 1992-12-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4363 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4364 Don't try to copy the info files if there aren't any; the
4365 unexpanded globbing pattern disappoints `install'. Ignore the
4366 return status of that command.
4368 * INSTALL: Updated for new configuration arrangement.
4370 * configure: Don't make the top-level Makefile read-only - people
4371 may want to edit the values of the path variables.
4373 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4374 Install the info files in ${infodir}. Install the executable
4375 under both `emacs' and `emacs-VERSION'.
4377 * Makefile.in: Doc fix.
4379 * Makefile.in (exec_prefix): New variable, as per latest version
4380 of coding standards.
4381 (bindir, libdir): Use it, instead of `prefix'.
4382 (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
4384 * Makefile.in (mandir): Make the default value for this depend on
4387 * Makefile.in (datadir, statedir, libdir): Make these all default
4389 (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
4392 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4393 Install the etags and ctags man pages too.
4395 * Makefile.in (distclean): Don't delete backup files; that's the
4397 (extraclean): Like distclean, but deletes backup and autosave files.
4399 1992-12-10 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4401 Make path specification conform to GNU coding standards.
4402 * configure (long_usage): Remove all traces of old arguments from
4403 usage messages, and document the options we do accept in more
4404 detail: -with-x... and --srcdir.
4405 (options, boolean_opts): Deleted; we don't have enough options to
4406 make this worthwhile.
4407 (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
4408 along with the code which supported them; these should be set as
4409 arguments to the top-level make.
4410 (config_h_opts): Since this no longer doubles as a list of option
4411 names, make them upper case; this simplifies the code which uses
4412 them to build the sed command to edit src/config.h. Change the
4413 code which sets them.
4414 (cc, g, O): Don't allow the user to set these using options; they
4415 should be specified using `CC=' and `CFLAGS=' arguments to the
4416 top-level make. Just choose reasonable default values for them,
4417 and edit them into Makefile.in's default CC and CONFIG_CFLAGS
4419 (gnu_malloc, rel_alloc): Don't allow the user to set these using
4420 options; use them whenever the configuration files say they're
4422 Simplify the argument processing loop. Don't accept abbreviations
4423 for option names; these might conflict with other configuration
4424 options in the future.
4425 Add some support for the `--srcdir' option. Check for the sources
4426 in . and .. if `--srcdir' is omitted. If the directories we will
4427 compile in don't exist yet, create them under the current directory.
4428 Note that the rest of the build process doesn't really support
4430 Edit only the top Makefile. That should edit the others. Edit
4431 into the makefile: `version', from lisp/version.el, `configname'
4432 and `srcdir' from the configuration arguments, `CC' and
4433 `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
4434 the user's path, and LOADLIBES as gleaned from the system
4436 Simplify the report generated; it doesn't need to include any
4437 description of paths now.
4438 Make `config.status' exec configure instead of just calling it, so
4439 there's no harm in overwriting `config.status'.
4440 * Makefile.in (version, configname): New variables, used to choose
4441 the default values for datadir and libdir.
4442 Path variables rearranged into two clearer groups:
4443 - In the first group are the variables specified by the GNU coding
4444 standards (prefix, bindir, datadir, statedir, libdir, mandir,
4445 manext, infodir, and srcdir).
4446 - In the second are the variables actually used for Emacs's paths
4447 (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
4448 archlibdir), which depend on the first category.
4449 datadir and libdir default to directories under
4450 ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
4452 etcdir and lispdir default to subdirectories of datadir.
4453 archlibdir defaults to libdir.
4454 The new installation tree is a bit deeper than it used to be, so
4455 use the new make-path program in lib-src to build them all.
4456 Always build a new src/paths.h.tmp and then move-if-change it to
4457 src/paths.h, to avoid unnecessary rebuilds while responding to the
4459 Remove all mention of arch-lib. Run utility commands from
4460 lib-src, and let the executables be copied into archlibdir when
4462 Add targets for src/Makefile, lib-src/Makefile, and
4463 oldXMenu/Makefile, editing the values of the path variables into
4465 Let lib-src do its own installation.
4466 (datadir): Default to putting data files under
4467 ${prefix}/lib/emacs/${version}, not /usr/local/emacs.
4468 (emacsdir): Variable deleted; it would only be confusing to use.
4469 (lispdir, etcdir): Default to ${datadir}/lisp.
4470 (mkdir): Use make-path for this.
4471 (lockdir): Do this in mkdir.
4472 (Makefile): New target.
4474 * configure (usage_message): Rename to long_usage.
4476 * make-dist: Don't bother creating an arch-lib directory; that's
4477 only for installation now.
4479 1992-11-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4481 * configure: Use GCC-style configuration names, using config.sub.
4482 Change the usage and help messages.
4484 * configure: Initialize window_system, not indow_system.
4486 * configure: Report which window system, compiler, and signal
4487 handler return type we decide to use.
4489 * make-dist: Explain what's going on if config.sub and gmalloc.c
4490 can't be linked. Place the code which copies them near the code
4491 which links the rest of the files around them.
4493 1992-11-15 Jim Blandy (jimb@apple-gunkies.gnu.ai.mit.edu)
4495 * make-dist: Don't bother to distribute src/*.com, or
4496 src/vmsbuild; those have all been moved to `../vms'.
4498 1992-11-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4500 * make-dist: Don't forget that the way to avoid filenames starting
4501 with `=' is to use the pattern `[a-zA-Z0-9]*.h', not
4502 `[a-zA-Z0-9].h'. Add a new section for dealing with files that we
4503 couldn't make hard links to, since we have two already, and
4504 perhaps more to come.
4506 1992-11-04 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4508 * configure: When editing parameters into lib-src/Makefile, change
4509 the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS
4510 needs some other flags too.
4512 1992-11-03 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4514 * configure: Remove spurious echo of the configuration name.
4516 * make-dist: Don't distribute files in src/m and src/s whose names
4519 1992-10-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4521 * configure: Update GNU_MALLOC and REL_ALLOC in config.h.
4522 Also LISP_FLOAT_TYPE.
4524 1992-10-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4526 * make-dist: Copy config.sub, since it's a symbolic link to a file
4527 on another file system.
4529 1992-10-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4531 * make-dist: Include lib-src/makedoc.com and emacs.csh in the
4534 * config.sub: New file, to help us recognize configuration names.
4535 * make-dist: Include it in the distribution.
4537 1992-09-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4539 * configure: Convert `-' to `_' in specified option names.
4540 Accept options with --. Delete --highpri and --have-x-menu options.
4541 New options --with-x and --with-x10 replace -window-system.
4542 Don't mention options --gnu-malloc, --rel-alloc
4543 or --lisp-float-type in help message.
4545 1992-09-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4547 * make-dist: Include the `vms' subdirectory in the distribution.
4549 1992-09-10 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4551 * configure: Remove lines starting with "# DIST: " when building
4552 lib-src/Makefile and src/Makefile. This allows us to mark the
4553 "Makefile.in" files with explanatory comments which won't also get
4554 stuck in the Makefiles.
4556 1992-09-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4558 * make-dist: Don't use the '+' operator in the sed regular
4559 expression that extracts the version number from lisp/version.el;
4560 Ultrix sed doesn't seem support the operator. Just double the
4563 1992-09-01 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4565 * Makefile.in: Doc fix.
4567 1992-08-31 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4569 * configure: Rewrite sed command to remove at most one ./ prefix;
4570 Ultrix's sed doesn't allow us to apply the * operator to a \( \)
4573 1992-08-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4575 * Makefile.in (src/paths.h): Use sed, not /bin/sed.
4577 1992-08-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4579 * make-dist: Go ahead and build a new TAGS file, unless the
4580 --newer option was specified. Don't try to delete a TAGS file
4581 from etc; it's not kept there, and shouldn't be deleted anyway.
4583 1992-08-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4585 * make-dist: If the lisp directory contains a default.el, don't
4588 * configure: When searching signal.h for the type of a signal
4589 return handler, make a copy of it, not a symbolic link to it; that
4590 way, it will work on systems that don't have symbolic links.
4592 1992-08-14 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4594 * make-dist: taught it about vcdiff and rcs2log, added --newer
4595 option for generating incremental distributions. Stopped it from
4596 generating a TAGS file into the distribution; that sucker is
4597 *big*, and easily enough generated with the toplevel makefile.
4599 1992-08-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4601 * configure: When writing config.status, don't prefix progname
4602 with a '.'; it might be absolute.
4604 1992-08-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4606 * configure: Choose to use X11 if either /usr/lib/libX11.a or
4607 /usr/include/X11 exist, not only if both exist.
4609 1992-07-27 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4611 * make-dist: Make the new external-lisp directory a duplicate of
4612 the external-lisp directory, not the lisp directory.
4614 1992-07-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4616 * Makefile.in (clean, mostlyclean): Don't bother trying to `make
4617 clean' in arch-lib; it doesn't even have a Makefile.
4619 * Makefile.in (clean, mostlyclean): In the test which tries to
4620 distinguish between the build directory, which should be cleaned,
4621 and the installed directory, which shouldn't, cd to `${emacsdir}',
4622 not `${DESTDIR}${LIBDIR}'.
4624 1992-06-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4626 * make-dist: Be sure to delete the .c and .h files that YACC and
4627 BISON create from getdate.y.
4629 * external-lisp: New directory; see `external-lisp/README'.
4630 * make-dist: Added support for the external-lisp subdirectory.
4632 * make-dist: Changed message which complains that make-dist wasn't
4633 invoked in the right directory to indicate which files it was
4636 1992-06-29 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4638 * configure: Add comments explaining why we can't translate
4639 character ranges or control characters in `tr'.
4641 1992-06-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4643 * configure: When generating the configuration message, we used to
4644 build the message from the start so that each line began with "# "
4645 so that it would be a comment in `config.status'. However, this
4646 causes trouble if any of the variables we use in the message
4647 expand to more than one line of text - as gnu_malloc_reason
4648 sometimes does. So instead, we build the message as it should be
4649 printed to the user (i.e. without the "# " prefixes), and stick on
4650 the "# "s when we write it to `config.status'.
4652 * Makefile.in (clean, mostlyclean): Don't neglect to clean out
4653 `lib-src' and `arch-lib'.
4655 * configure: When generating report and `config.status' file, note
4656 that bindir only determines where `make install' and
4657 `build-install' will place the executables; this should make it
4658 clear that the ordinary build process will not try to install
4661 1992-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4663 * make-dist: Change messages to say that we are 'making links to
4664 X', rather than 'copying X'. And put `' quotes around file names.
4666 * make-dist: Include '.tmp' in the name of the staging directory.
4668 * make-dist: Pass the `-f' option to rm when you're not sure that
4669 the files you're removing actually exist.
4671 * make-dist: When setting up etc/COPYING, always nuke whatever is
4672 there, and then copy it in, to make sure we get a real file.
4674 * make-dist: Don't try to distribute *.defns files any more. The
4675 only such file was for simula.el, which has been superceded by a
4676 version which doesn't have a separate .defns file.
4678 1992-05-28 Ken Raeburn (Raeburn@Cygnus.COM)
4680 * make-dist: Don't distribute configured versions of config.h.in,
4681 paths.h.in, Makefile.in in src.
4683 * configure: Delete .tmp files before creating them; don't bother
4684 trying to make final targets writeable first, since it won't
4685 matter to move-if-change.
4687 1992-05-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4689 * Makefile.in (mkdir, lockdir): Don't put dashes in front of the
4690 mkdir and chmod in the center of all the conditionals. GNU Make
4691 will strip these out, but other makes won't.
4693 1992-05-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4695 * make-dist: Include move-if-change in list of files to distribute.
4697 1992-05-04 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4699 * configure: Remove any "." elements from the program name.
4701 * configure: Don't record the values of all the possible arguments
4702 in config.status; only record the options that the user specified.
4704 * configure: Use move-if-change to move in the new src/config.h.
4706 1992-04-29 Ken Raeburn (Raeburn@Cygnus.COM)
4708 * move-if-change: New file, copied from gcc release.
4709 * Makefile.in (src/paths.h): Use it, and put the "sed" output into
4710 a temp file, so we don't update paths.h if an error occurs or if
4711 it doesn't need changing.
4713 1992-04-28 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4715 * Makefile.in (src/paths.h): Do not install a value for the
4716 PATH_SUPERLOCK value; that macro doesn't exist anymore.
4717 * build-install.in: Same thing.
4719 1992-04-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4721 * make-dist: Check the flag called "make_tar", not "make_dir"; the
4722 latter, being a typo, is always false, resulting in a program
4723 whose default behaviour is to painstakingly build a copy of the
4724 source tree, and then delete it. Rah.
4726 * Makefile.in: Add dist target, and comment for it.
4728 * configure: When scanning <signal.h> for a declaration for
4729 signal, create a symbolic link with a name ending in .c, so the
4730 compiler won't complain that it's only been given .h files.
4732 * configure: Check whether there are any arguments available
4733 before shifting to get the value of a non-boolean parameter.
4735 * make-dist: Doc fix.
4737 1992-04-20 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4739 * configure: Instead of grepping /usr/include/signal.h for a
4740 signal declaration, run /usr/include/signal.h or
4741 /usr/include/sys/signal.h through cpp and grep for the
4744 * configure: Redirect the output of grep to /dev/null instead of
4745 using grep -s - that flag means different things on other systems.
4747 * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath',
4748 since the former is recognizable even if you don't know what
4750 * configure: Accomodate that change.
4752 * configure: Accept options for all of the directories you can
4753 change in the Makefile.
4755 * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE".
4757 * INSTALL: Mention that you have to copy all the 'FOO.in' files to
4758 FOO before you can use them.
4760 * build-install.in: Made the "Where To Install Things" section
4761 conform with the similar section from Makefile.in. Copied section
4762 which builds src/paths.h from src/paths.h.in from the Makefile.
4764 1992-04-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4766 * configure: Write config.status to pass its command-line
4767 arguments on to configure, so that people can use it to recreate
4768 an old configuration, with minor changes.
4770 1992-04-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4772 * configure: Don't rely on option variables being unset if their
4773 values are the empty string. In particular, when producing the
4774 English report, don't assume that highpri will be unset when no
4775 increased priority has been requested; -highpri='' should be the
4776 same as omitting -highpri altogether.
4778 * configure: Fix dumb bug: when running the system and machine
4779 description files through cpp, mark those lines that we want to
4780 evaluate with the string '@configure@', and then only evaluate
4781 them. This way if the files include anything that actually
4782 generates text (type definitions or external declarations, say),
4783 we won't try to eval it.
4785 1992-04-11 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4787 * make-dist: New shell script.
4789 * configure: When creating foo from foo.in, make foo read-only to
4790 remind people to edit the .in file instead.
4792 * INSTALL: Changed references to config.h-dist to config.h.in.
4793 The "BUILDING GNU EMACS BY HAND" section neglected to mention how
4794 to build src/paths.h from src/paths.h.in; added a paragraph to do
4796 * configure, Makefile, build-install: Changed filenames like
4799 1992-04-08 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4801 * Makefile, build-install: Renamed to Makefile.in and
4802 build-install.in; the configure script will edit these to produce
4803 the usable Makefile and build-install.
4804 * configure: Changed to produce ./Makefile, ./build-install,
4805 lib-src/Makefile, and src/Makefile from their *.in counterparts,
4806 instead of editing them in place.
4808 1992-04-07 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4810 * Makefile: Re-arranged so that the undumped Emacs will search
4811 ../lisp *after* the site's local elisp files.
4812 (locallisppath, dumplisppath): New variables.
4813 (lisppath): This variable's default value is now chosen based on
4814 $(locallisppath) and $(lispdir); while it used to be the
4815 customization point for adding site-local elisp directories to
4816 load-path, that job is now handled mostly by locallisppath.
4817 (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH.
4818 Check the values being assigned to the *LOADSEARCH macros for null
4819 path elements (like '::' in 'foo::bar').
4821 * configure: When checking if the machine- and system-dependent
4822 files define a particular macro or not, actually run them through
4823 CPP and test the macros with #ifs, instead of just grepping for
4824 the macros' names. In particular, check for SYSTEM_MALLOC in this
4827 1992-04-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4829 * Makefile (install): Don't use -s in install. (Keep the symbols.)
4831 1992-04-02 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4833 * configure: Make the config.status file an executable shell
4834 script which will recreate the same configuration. Include the
4835 verbal description of the current configuration as a comment in
4839 * Makefile: brought the Makefile up to the GNU coding
4840 standards, as described in standards.text:
4841 (TAGS): New name for the target which rebuilds the tags table.
4842 (check): New target; doesn't do anything yet.
4843 (mostlyclean): New target, synonymous with clean.
4844 (realclean): New target. Currently, this just calls the
4845 subdirectories's makefiles and then deletes config.status.
4846 (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
4848 Installation directory variables changed to conform.
4849 (install, install.sysv, install.xenix, install.aix): Changed the
4850 code which copies the directories into their installed location to
4851 allow the installed locations to be in several different
4852 directories; the old version assumed that they would all be in
4854 (mkdir, lockdir): Allow the installed locations to be in several
4855 different directories.
4858 * build-install: Use the same variable names as the Makefile.
4859 Allow the installed locations to be in several different
4862 1992-03-31 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4864 * Makefile (src/paths.h): Instead of using a single sed command to
4865 edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two
4866 separately, and don't forget to append "/!!!SuperLock!!!" to the
4867 value of the PATH_SUPERLOCK macro.
4869 * config.emacs: Renamed to configure, for consistency with other
4870 GNU products. Internal references changed.
4871 INSTALL, Makefile: References changed.
4873 * lock: New directory, which should always be empty. If this
4874 directory doesn't exist, Emacs won't complain; it just won't lock.
4875 Having this here means that people can just unpack Emacs, build
4876 it, and have locking work.
4878 * share-lib: Re-renamed to etc, for the sake of tradition.
4879 * config.emacs: Changed default value for datadir to ../etc.
4880 * INSTALL, README: Adjusted.
4882 1992-03-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4884 * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile
4885 by running CPP on the appropriate s/*.h and m/*.h files.
4887 1992-03-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4889 * config.emacs: Make sure to set the "exit on error" flag once
4890 we've removed config.status; errors should abort the configuration.
4892 1992-02-15 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4894 * config.emacs: Added -distribute option, so that the Makefile
4895 paths are in their proper form. I don't know why this matters.
4897 1992-02-14 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4899 * local-lisp: New directory, empty in the distribution, for people
4900 to put local elisp code in.
4901 * config.emacs: Include it in the default load path.
4902 * README: Document it.
4904 1992-01-30 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4906 * config.emacs: Guess the type of signal handling functions based
4907 on the contents of /usr/include/signal.h.
4909 * config.emacs: Print out progress report messages.
4911 * Makefile (src/paths.h): Don't generically replace
4912 /usr/local/lib/emacs with LIBROOT. This can hide bugs in the
4913 editing of the other entries, and each entry should be dealt with
4916 * build-install: Converted from C-shell to Bourne shell.
4917 * config.emacs: Edit build-install properly.
4919 * config.emacs: Doc fix.
4921 1992-01-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4923 * Makefile (install): Remove `B' from tar xf command.
4925 1992-01-13 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4927 * config.emacs: Removed support for the `maintain-environment'
4928 option; the only important difference between this and its absence
4930 * INSTALL: Removed mention of `maintain-environment'.
4932 * config.emacs: Fix arguments to sed when processing boolean
4935 1991-12-05 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
4937 * config.emacs: New file, to help automate the installation
4940 * Makefile: Lots of changes to support the separation of etc into
4941 architecture-dependent and -independent files:
4942 (EMACSROOT): New variable, giving the directory under which all of
4943 Emacs's libraries should be installed. Changed rest of file to
4945 (LIBDIR): Now denotes only architecture-dependent dir - relevant cha
4946 (DATADIR): New variable, denoting architecture-independent dir.
4947 (LOCKDIR): New variable, for completeness.
4948 (SUBDIR): No more etc, new lib-src.
4949 (COPYDIR): No more etc, new arch-lib and share-lib.
4950 (src/paths.h): Set PATH_DATA and the LOCK macros too.
4951 (src): Now depends on lib-src, not etc.
4952 * build-install: Changes parallel to the above.
4953 * README: Describe the new arrangement.
4955 * vms: New subdirectory for all the VMS stuff.
4957 1991-12-03 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
4959 * Makefile (LISPPATH): New variable.
4960 (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH.
4962 1990-09-28 Richard Stallman (rms at mole.ai.mit.edu)
4964 * Makefile (install, install.sysv, install.xenix):
4965 Install wakeup instead of loadst. No need for setuid or setgid.
4967 1990-08-07 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4969 * Makefile (clean): Clean etc if that's not the installation dir.
4971 1990-04-26 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4973 * Makefile (paths.h): Make sed alter each name in the path.
4975 1988-08-30 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4977 * Makefile (install.sysv): Use cpio, not tar.
4979 1988-08-03 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4981 * Makefile (lockdir): Rename `lock' target.
4982 Depend on it from install*, not from `all'.
4984 1988-05-16 Richard Stallman (rms at frosted-flakes.ai.mit.edu)
4986 * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin}
4987 to match build-install and paths.h.
4990 ;; coding: iso-2022-7bit-unix