Grammar fixes
[emacs.git] / Makefile.in
blobab9f16c0353a85a4e5040da3269685345a21ac29
1 # DIST: This is the distribution Makefile for Emacs. configure can
2 # DIST: make most of the changes to this file you might want, so try
3 # DIST: that first.
5 # Copyright (C) 1992-2012 Free Software Foundation, Inc.
7 # This file is part of GNU Emacs.
9 # GNU Emacs is free software: you can redistribute it and/or modify
10 # it under the terms of the GNU General Public License as published by
11 # the Free Software Foundation, either version 3 of the License, or
12 # (at your option) any later version.
14 # GNU Emacs is distributed in the hope that it will be useful,
15 # but WITHOUT ANY WARRANTY; without even the implied warranty of
16 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 # GNU General Public License for more details.
19 # You should have received a copy of the GNU General Public License
20 # along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
22 ### Commentary:
24 # make all to compile and build Emacs.
25 # make install to install it.
26 # make TAGS to update tags tables.
28 # make clean or make mostlyclean
29 # Delete all files from the current directory that are normally
30 # created by building the program. Don't delete the files that
31 # record the configuration. Also preserve files that could be made
32 # by building, but normally aren't because the distribution comes
33 # with them.
35 # Delete `.dvi' files here if they are not part of the distribution.
37 # make distclean
38 # Delete all files from the current directory that are created by
39 # configuring or building the program. If you have unpacked the
40 # source and built the program without creating any other files,
41 # `make distclean' should leave only the files that were in the
42 # distribution.
44 # make maintainer-clean
45 # Delete everything from the current directory that can be
46 # reconstructed with this Makefile. This typically includes
47 # everything deleted by distclean, plus more: .elc files,
48 # C source files produced by Bison, tags tables, info files,
49 # and so on.
51 # make extraclean
52 # Still more severe - delete backup and autosave files, too.
54 # make bootstrap
55 # Removes all the compiled files to force a new bootstrap from a
56 # clean slate, and then build in the normal way.
58 SHELL = /bin/sh
60 # This may not work with certain non-GNU make's. It only matters when
61 # inheriting a CDPATH not starting with the current directory.
62 CDPATH=
64 # If Make doesn't predefine MAKE, set it here.
65 @SET_MAKE@
67 # ==================== Things `configure' Might Edit ====================
69 cache_file = @cache_file@
70 CONFIGURE_FLAGS = --cache-file=$(cache_file)
72 CC=@CC@
73 CFLAGS=@CFLAGS@
74 LDFLAGS=@LDFLAGS@
75 CPPFLAGS=@CPPFLAGS@
76 EXEEXT=@EXEEXT@
78 ### These help us choose version- and architecture-specific directories
79 ### to install files in.
81 ### This should be the number of the Emacs version we're building,
82 ### like `18.59' or `19.0'.
83 version=@version@
85 ### This should be the name of the configuration we're building Emacs
86 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
87 configuration=@configuration@
89 # ==================== Where To Install Things ====================
91 # Location to install Emacs.app under GNUstep / Mac OS X.
92 # Later values may use these.
93 ns_appbindir=@ns_appbindir@
94 ns_appresdir=@ns_appresdir@
95 # Either yes or no depending on whether this is a relocatable Emacs.app.
96 ns_self_contained=@ns_self_contained@
98 # The default location for installation. Everything is placed in
99 # subdirectories of this directory. The default values for many of
100 # the variables below are expressed in terms of this one, so you may
101 # not need to change them. This defaults to /usr/local.
102 prefix=@prefix@
104 # Like `prefix', but used for architecture-specific files.
105 exec_prefix=@exec_prefix@
107 # Where to install Emacs and other binaries that people will want to
108 # run directly (like etags).
109 bindir=@bindir@
111 # The root of the directory tree for read-only architecture-independent
112 # data files. ${datadir}, ${infodir} and ${mandir} are based on this.
113 datarootdir=@datarootdir@
115 # Where to install architecture-independent data files. ${lispdir}
116 # and ${etcdir} are subdirectories of this.
117 datadir=@datadir@
119 # Where to install and expect the files that Emacs modifies as it
120 # runs. These files are all architecture-independent.
121 # Right now, this is not used.
122 sharedstatedir=@sharedstatedir@
124 # Where to install and expect executable files to be run by Emacs
125 # rather than directly by users (and other architecture-dependent
126 # data, although Emacs does not have any). The executables
127 # are actually installed in ${archlibdir}, which is (normally)
128 # a subdirectory of this.
129 libexecdir=@libexecdir@
131 # Where to install Emacs's man pages.
132 # Note they contain cross-references that expect them to be in section 1.
133 mandir=@mandir@
134 man1dir=$(mandir)/man1
136 # Where to install and expect the info files describing Emacs.
137 infodir=@infodir@
138 # Info files not in the doc/misc directory (we get those via make echo-info).
139 INFO_EXT=@INFO_EXT@
140 INFO_NONMISC=emacs$(INFO_EXT) eintr$(INFO_EXT) elisp$(INFO_EXT)
142 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
143 HAVE_MAKEINFO=@HAVE_MAKEINFO@
145 # Directory for local state files for all programs.
146 localstatedir=@localstatedir@
148 # Where to look for bitmap files.
149 bitmapdir=@bitmapdir@
151 # Where to find the source code. The source code for Emacs's C kernel is
152 # expected to be in ${srcdir}/src, and the source code for Emacs's
153 # utility programs is expected to be in ${srcdir}/lib-src. This is
154 # set by the configure script's `--srcdir' option.
156 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
157 srcdir=@srcdir@
159 # Where the manpage source files are kept.
160 mansrcdir=$(srcdir)/doc/man
162 # Tell make where to find source files; this is needed for the makefiles.
163 VPATH=@srcdir@
165 # Where to find the application default.
166 x_default_search_path=@x_default_search_path@
168 # Where the etc/emacs.desktop file is to be installed.
169 desktopdir=$(datarootdir)/applications
171 # Where the etc/images/icons/hicolor directory is to be installed.
172 icondir=$(datarootdir)/icons
174 # The source directory for the icon files.
175 iconsrcdir=$(srcdir)/etc/images/icons
177 # ==================== Emacs-specific directories ====================
179 # These variables hold the values Emacs will actually use. They are
180 # based on the values of the standard Make variables above.
182 # Where to install the lisp, leim files distributed with
183 # Emacs. This includes the Emacs version, so that the
184 # lisp files for different versions of Emacs will install
185 # themselves in separate directories.
186 lispdir=@lispdir@
187 leimdir=@leimdir@
189 # Directories Emacs should search for standard lisp files.
190 # The default is ${lispdir}:${leimdir}.
191 standardlisppath=@standardlisppath@
193 # Directories Emacs should search for lisp files specific to this
194 # site (i.e. customizations), before consulting ${standardlisppath}.
195 # This should be a colon-separated list of directories.
196 locallisppath=@locallisppath@
198 # Where Emacs will search to find its lisp files. Before
199 # changing this, check to see if your purpose wouldn't
200 # better be served by changing locallisppath. This
201 # should be a colon-separated list of directories.
202 # The default is ${locallisppath}:${standardlisppath}.
203 lisppath=@lisppath@
205 # Where Emacs will search for its lisp files while
206 # building. This is only used during the process of
207 # compiling Emacs, to help Emacs find its lisp files
208 # before they've been installed in their final location.
209 # This should be a colon-separated list of directories.
210 # Normally it points to the lisp/ directory in the sources.
211 buildlisppath=${srcdir}/lisp
213 # Where to install the other architecture-independent
214 # data files distributed with Emacs (like the tutorial,
215 # the cookie recipes and the Zippy database). This path
216 # usually contains the Emacs version number, so the data
217 # files for multiple versions of Emacs may be installed
218 # at once.
219 etcdir=@etcdir@
221 # Where to put executables to be run by Emacs rather than
222 # the user. This path usually includes the Emacs version
223 # and configuration name, so that multiple configurations
224 # for multiple versions of Emacs may be installed at
225 # once.
226 archlibdir=@archlibdir@
228 # Where to put the docstring file.
229 docdir=@docdir@
231 # Where to install Emacs game score files.
232 gamedir=@gamedir@
234 # ==================== Utility Programs for the Build ====================
236 # Allow the user to specify the install program.
237 # Note that if the system does not provide a suitable install,
238 # configure will use build-aux/install-sh. Annoyingly, it does
239 # not use an absolute path. So we must take care to always run
240 # INSTALL-type commands from the directory containing the Makefile.
241 # This explains (I think) the cd thisdir seen in several install rules.
242 INSTALL = @INSTALL@
243 INSTALL_PROGRAM = @INSTALL_PROGRAM@
244 INSTALL_DATA = @INSTALL_DATA@
245 INSTALL_INFO = @INSTALL_INFO@
246 # By default, we uphold the dignity of our programs.
247 INSTALL_STRIP =
248 MKDIR_P = @MKDIR_P@
250 # We use gzip to compress installed .el files.
251 GZIP_PROG = @GZIP_PROG@
252 # If non-nil, gzip the installed Info and man pages.
253 GZIP_INFO = @GZIP_INFO@
255 # ============================= Targets ==============================
257 # Program name transformation.
258 TRANSFORM = @program_transform_name@
260 # What emacs should be called when installed.
261 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
262 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
264 # Subdirectories to make recursively.
265 SUBDIR = lib lib-src src lisp leim
267 # The subdir makefiles created by config.status.
268 SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
269 SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
271 # Subdirectories to install, and where they'll go.
272 # lib-src's makefile knows how to install it, so we don't do that here.
273 # Directories that cannot simply be copied, eg info,
274 # are treated separately.
275 # quail appears twice because in out-of-tree builds, it exists twice.
276 COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
277 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail
279 all: ${SUBDIR}
281 .PHONY: all ${SUBDIR} blessmail epaths-force FRC
283 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
285 # Generate epaths.h from epaths.in. This target is invoked by `configure'.
286 # See comments in configure.ac for why it is done this way, as opposed
287 # to just letting configure generate epaths.h from epaths.in in a
288 # similar way to how Makefile is made from Makefile.in.
289 epaths-force: FRC
290 @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
291 locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
292 buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
293 x_default_search_path=`echo ${x_default_search_path}`; \
294 gamedir=`echo ${gamedir}`; \
295 sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
296 -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
297 -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
298 -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
299 -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
300 -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
301 -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
302 -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
303 -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
304 -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
305 -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \
306 ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
308 lib-src src: lib
310 src: lib-src FRC
312 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'
313 # and `leim'.
314 lisp leim: src
316 # These targets should be "${SUBDIR} without `src'".
317 lib lib-src lisp leim: Makefile FRC
318 cd $@ && $(MAKE) all $(MFLAGS) \
319 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
320 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
322 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
323 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
324 # constructed yet) or the empty string (otherwise).
325 # src/Makefile.in uses it to implement conditional dependencies, so that
326 # files that need bootstrap-emacs to be built do not additionally need
327 # to be kept fresher than bootstrap-emacs. Otherwise changing a single
328 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
329 # all preloaded elisp files, and only then dump the actual src/emacs, which
330 # is not wrong, but is overkill in 99.99% of the cases.
331 src: Makefile FRC
332 boot=bootstrap-emacs$(EXEEXT); \
333 if [ ! -x "src/$$boot" ]; then \
334 cd $@; $(MAKE) all $(MFLAGS) \
335 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
336 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \
338 if [ -r .bzr/checkout/dirstate ]; then \
339 vcswitness="`pwd`/.bzr/checkout/dirstate"; \
340 fi; \
341 cd $@; $(MAKE) all $(MFLAGS) \
342 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
343 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="" \
344 VCSWITNESS="$$vcswitness"
346 blessmail: Makefile src FRC
347 cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \
348 MAKE='${MAKE}' archlibdir='$(archlibdir)'
350 # We used to have one rule per */Makefile.in, but that leads to race
351 # conditions with parallel makes, so let's assume that the time stamp on
352 # ./Makefile is representative of the time stamp on all the other Makefiles.
354 # config.status overrides MAKEFILE_NAME with a bogus name when creating
355 # src/epaths.h, so that 'make epaths-force' does not recursively invoke
356 # config.status and overwrite config.status while executing it (Bug#11214).
357 MAKEFILE_NAME = Makefile
358 $(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
359 $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN)
360 ./config.status
362 # Don't erase config.status if make is interrupted while refreshing it.
363 .PRECIOUS: config.status
365 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
366 if [ -x ./config.status ]; then \
367 ./config.status --recheck; \
368 else \
369 ./configure $(CONFIGURE_FLAGS); \
372 AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
374 $(srcdir)/configure: $(AUTOCONF_INPUTS)
375 cd ${srcdir} && autoconf
377 ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4
378 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
379 cd $(srcdir) && aclocal -I m4
381 AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \
382 $(srcdir)/lib/gnulib.mk
383 $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
384 cd $(srcdir) && automake --gnu -a -c lib/Makefile
385 am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
386 .PHONY: am--refresh
388 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
389 @ # Usually, there's no need to rebuild src/config.in just
390 @ # because stamp-h.in has changed (since building stamp-h.in
391 @ # refreshes config.in as well), but if config.in is missing
392 @ # then we really need to do something more.
393 [ -r "$@" ] || ( cd ${srcdir} && autoheader )
394 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
395 cd ${srcdir} && autoheader
396 rm -f $(srcdir)/src/stamp-h.in
397 echo timestamp > $(srcdir)/src/stamp-h.in
399 # ==================== Installation ====================
401 .PHONY: install install-arch-dep install-arch-indep install-doc install-info
402 .PHONY: install-man install-etc install-strip uninstall
404 ## If we let lib-src do its own installation, that means we
405 ## don't have to duplicate the list of utilities to install in
406 ## this Makefile as well.
408 install: all install-arch-indep install-doc install-arch-dep blessmail
409 @true
411 ## Ensure that $subdir contains a subdirs.el file.
412 ## Here and elsewhere, we set the umask so that any created files are
413 ## world-readable.
414 ## TODO it might be good to warn about non-standard permissions of
415 ## pre-existing directories, but that does not seem easy.
416 write_subdir=if [ -f $${subdir}/subdirs.el ]; \
417 then true; \
418 else \
419 umask 022; \
420 ${MKDIR_P} $${subdir}; \
421 (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
422 echo " (normal-top-level-add-subdirs-to-load-path))") \
423 > $${subdir}/subdirs.el; \
426 ### Install the executables that were compiled specifically for this machine.
427 ### We do install-arch-indep first because the executable needs the
428 ### Lisp files and DOC file to work properly.
429 install-arch-dep: install-arch-indep install-doc
430 umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
431 cd lib-src && \
432 $(MAKE) install $(MFLAGS) prefix=${prefix} \
433 exec_prefix=${exec_prefix} bindir=${bindir} \
434 libexecdir=${libexecdir} archlibdir=${archlibdir} \
435 INSTALL_STRIP=${INSTALL_STRIP}
436 if test "${ns_self_contained}" = "no"; then \
437 ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
438 chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) ; \
439 rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
440 ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS) || true ; \
441 else \
442 subdir=${ns_appresdir}/site-lisp; \
443 ${write_subdir} || exit 1; \
444 rm -rf ${ns_appresdir}/share; \
447 ## In the share directory, we are deleting:
448 ## applications (with emacs.desktop, also found in etc/)
449 ## emacs (basically empty except for unneeded site-lisp directories)
450 ## icons (duplicates etc/images/icons/hicolor)
452 ## This is install-etc for everything except self-contained-ns builds.
453 ## For them, it is empty.
454 INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
456 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
457 ## Needs to be the user running install, so configure can't set it.
458 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
459 `id -un 2> /dev/null`; do \
460 [ -n "$${installuser}" ] && break ; \
461 done
463 ### Install the files that are machine-independent.
464 ### Most of them come straight from the distribution; the exception is
465 ### the DOC file, which is copied from the build directory.
467 ## We delete each directory in ${COPYDESTS} before we copy into it;
468 ## that way, we can reinstall over directories that have been put in
469 ## place with their files read-only (perhaps because they are checked
470 ## into RCS). In order to make this safe, we make sure that the
471 ## source exists and is distinct from the destination.
473 ## We delete etc/DOC* because there may be irrelevant DOC files from
474 ## other builds in the source directory. This is ok because we just
475 ## deleted the entire installed etc/ directory and recreated it.
476 ## install-doc installs the relevant DOC.
478 ## Note that the Makefiles in the etc directory are potentially useful
479 ## in an installed Emacs, so should not be excluded.
481 ## I'm not sure creating locallisppath here serves any useful purpose.
482 ## If it has the default value, then the later write_subdir commands
483 ## will ensure all these components exist.
484 ## This will only do something if locallisppath has a non-standard value.
485 ## Is it really Emacs's job to create those directories?
486 ## Should we also be ensuring they contain subdirs.el files?
487 ## It would be easy to do, just use write_subdir.
489 ## Note that we use tar instead of plain old cp -R/-r because the latter
490 ## is apparently not portable (even in 2012!).
491 ## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
492 ## I have no idea which platforms Emacs supports where cp -R does not
493 ## work correctly, and therefore no idea when tar can be replaced.
494 ## See also these comments from 2004 about cp -r working fine:
495 ## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
496 install-arch-indep: install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
497 umask 022 ; \
498 locallisppath='${locallisppath}'; \
499 IFS=:; \
500 for d in $$locallisppath; do \
501 ${MKDIR_P} "$(DESTDIR)$$d"; \
502 done
503 -set ${COPYDESTS} ; \
504 unset CDPATH; \
505 $(set_installuser); \
506 for dir in ${COPYDIR} ; do \
507 [ -d $${dir} ] || exit 1 ; \
508 dest=$$1 ; shift ; \
509 [ -d $${dest} ] && \
510 [ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \
511 continue ; \
512 if [ "$${dir}" = "leim/quail" ]; then \
513 [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \
514 continue ; \
515 else \
516 rm -rf $${dest} ; \
517 umask 022; ${MKDIR_P} $${dest} ; \
518 fi ; \
519 echo "Copying $${dir} to $${dest}..." ; \
520 (cd $${dir}; tar -chf - . ) \
521 | (cd $${dest}; umask 022; \
522 tar -xvf - && cat > /dev/null) || exit 1; \
523 [ "$${dir}" != "${srcdir}/etc" ] || rm -f $${dest}/DOC* ; \
524 for subdir in `find $${dest} -type d -print` ; do \
525 rm -f $${subdir}/.gitignore ; \
526 rm -f $${subdir}/.arch-inventory ; \
527 rm -f $${subdir}/.DS_Store ; \
528 rm -f $${subdir}/\#* ; \
529 rm -f $${subdir}/.\#* ; \
530 rm -f $${subdir}/*~ ; \
531 rm -f $${subdir}/*.orig ; \
532 rm -f $${subdir}/ChangeLog* ; \
533 [ "$${dir}" != "${srcdir}/etc" ] && \
534 rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
535 done ; \
536 find $${dest} -exec chown $${installuser} {} ';' ;\
537 done
538 -rm -f $(DESTDIR)${leimdir}/leim-list.el
539 ${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el
540 -rm -f $(DESTDIR)${lispdir}/subdirs.el
541 umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir}
542 subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
543 ${write_subdir}
544 subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
545 ${write_subdir} || true
546 [ -z "${GZIP_PROG}" ] || \
547 ( echo "Compressing *.el ..." ; \
548 unset CDPATH; \
549 thisdir=`/bin/pwd`; \
550 for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \
551 cd $${thisdir} ; \
552 cd $${dir} || exit 1 ; \
553 for f in `find . -name "*.elc" -print`; do \
554 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
555 done ; \
556 done )
557 -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
559 # The last chmod isn't needed at present.
561 ## We install only the relevant DOC file if possible
562 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
563 ## (Note "otherwise" is inaccurate since 2009-08-23.)
565 ## Note that install-arch-indep deletes and recreates the entire
566 ## installed etc/ directory, so we need it to run before this does.
567 install-doc: install-arch-indep
568 -unset CDPATH; \
569 umask 022; ${MKDIR_P} $(DESTDIR)${docdir} ; \
570 if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${docdir}; /bin/pwd` ]; \
571 then \
572 fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
573 if [ -f "./etc/DOC-$${fullversion}" ]; \
574 then \
575 docfile="DOC-$${fullversion}"; \
576 else \
577 docfile="DOC"; \
578 fi; \
579 echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
580 ${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${docdir}/$${docfile}; \
581 $(set_installuser); \
582 chown $${installuser} $(DESTDIR)${docdir}/$${docfile} || true ; \
583 else true; fi
585 install-info: info
586 umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
587 -unset CDPATH; \
588 thisdir=`/bin/pwd`; \
589 [ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \
590 (cd $(DESTDIR)${infodir}; \
591 [ -f dir ] || \
592 (cd $${thisdir}; \
593 ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
594 info_misc=`cd $${thisdir}/doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
595 cd ${srcdir}/info ; \
596 for elt in ${INFO_NONMISC} $${info_misc}; do \
597 test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
598 for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
599 (cd $${thisdir}; \
600 ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
601 ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
602 rm -f $(DESTDIR)${infodir}/$$f.gz; \
603 ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
604 done; \
605 (cd $${thisdir}; \
606 ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
607 done)
609 install-man:
610 umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
611 thisdir=`/bin/pwd`; \
612 cd ${mansrcdir}; \
613 for page in *.1; do \
614 (cd $${thisdir}; \
615 ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}); \
616 ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
617 rm -f $(DESTDIR)${man1dir}/$${page}.gz; \
618 ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \
619 done
621 ## Install those items from etc/ that need to end up elsewhere.
622 install-etc:
623 umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
624 ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
625 $(DESTDIR)${desktopdir}/emacs.desktop
626 thisdir=`/bin/pwd`; \
627 cd ${iconsrcdir} || exit 1; umask 022 ; \
628 for dir in */*/apps */*/mimetypes; do \
629 [ -d $${dir} ] || continue ; \
630 ( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \
631 for icon in $${dir}/*.*; do \
632 [ -r $${icon} ] || continue ; \
633 ( cd $${thisdir}; \
634 ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${icon} ) \
635 || exit 1; \
636 done ; \
637 done
639 ### Build Emacs and install it, stripping binaries while installing them.
640 install-strip:
641 $(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
643 ### Delete all the installed files that the `install' target would
644 ### create (but not the noninstalled files such as `make all' would create).
646 ### Don't delete the lisp and etc directories if they're in the source tree.
647 uninstall:
648 cd lib-src && \
649 $(MAKE) $(MFLAGS) uninstall \
650 prefix=${prefix} exec_prefix=${exec_prefix} \
651 bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
652 -unset CDPATH; \
653 for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \
654 if [ -d $${dir} ]; then \
655 case `cd $${dir} ; /bin/pwd` in \
656 `cd ${srcdir} ; /bin/pwd`* ) ;; \
657 * ) rm -rf $${dir} ;; \
658 esac ; \
659 case $${dir} in \
660 $(DESTDIR)${datadir}/emacs/${version}/* ) \
661 rm -rf $(DESTDIR)${datadir}/emacs/${version} \
662 ;; \
663 esac ; \
664 fi ; \
665 done
666 -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
667 thisdir=`/bin/pwd`; \
668 (info_misc=`cd doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
669 cd $(DESTDIR)${infodir} && \
670 for elt in ${INFO_NONMISC} $${info_misc}; do \
671 (cd $${thisdir}; \
672 $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
673 if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
674 ext=.gz; else ext=; fi; \
675 rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
676 done;)
677 (if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
678 ext=.gz; else ext=; fi; \
679 cd ${mansrcdir} && for page in *.1; do \
680 rm -f $(DESTDIR)${man1dir}/$$page$$ext; done )
681 (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS))
682 (cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg )
683 -rm -f $(DESTDIR)${desktopdir}/emacs.desktop
684 for file in snake-scores tetris-scores; do \
685 file=$(DESTDIR)${gamedir}/$${file}; \
686 [ -s $${file} ] || rm -f $$file; \
687 done
689 FRC:
691 # ==================== Cleaning up and miscellanea ====================
693 .PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
695 ### `mostlyclean'
696 ### Like `clean', but may refrain from deleting a few files that people
697 ### normally don't want to recompile. For example, the `mostlyclean'
698 ### target for GCC does not delete `libgcc.a', because recompiling it
699 ### is rarely necessary and takes a lot of time.
700 mostlyclean: FRC
701 (cd src; $(MAKE) $(MFLAGS) mostlyclean)
702 (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
703 (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
704 (cd lib; $(MAKE) $(MFLAGS) mostlyclean)
705 (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
706 -(cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean)
707 -(cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean)
708 -(cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean)
709 -(cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean)
710 (cd leim; $(MAKE) $(MFLAGS) mostlyclean)
712 ### `clean'
713 ### Delete all files from the current directory that are normally
714 ### created by building the program. Don't delete the files that
715 ### record the configuration. Also preserve files that could be made
716 ### by building, but normally aren't because the distribution comes
717 ### with them.
719 ### Delete `.dvi' files here if they are not part of the distribution.
720 clean: FRC
721 (cd src; $(MAKE) $(MFLAGS) clean)
722 (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
723 (cd lwlib; $(MAKE) $(MFLAGS) clean)
724 (cd lib; $(MAKE) $(MFLAGS) clean)
725 (cd lib-src; $(MAKE) $(MFLAGS) clean)
726 -(cd doc/emacs && $(MAKE) $(MFLAGS) clean)
727 -(cd doc/misc && $(MAKE) $(MFLAGS) clean)
728 -(cd doc/lispref && $(MAKE) $(MFLAGS) clean)
729 -(cd doc/lispintro && $(MAKE) $(MFLAGS) clean)
730 (cd leim; $(MAKE) $(MFLAGS) clean)
732 ### `bootclean'
733 ### Delete all files that need to be remade for a clean bootstrap.
734 top_bootclean=\
735 rm -f config.cache config.log
736 ### `distclean'
737 ### Delete all files from the current directory that are created by
738 ### configuring or building the program. If you have unpacked the
739 ### source and built the program without creating any other files,
740 ### `make distclean' should leave only the files that were in the
741 ### distribution.
742 top_distclean=\
743 ${top_bootclean}; \
744 rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
745 distclean: FRC
746 (cd src; $(MAKE) $(MFLAGS) distclean)
747 (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
748 (cd lwlib; $(MAKE) $(MFLAGS) distclean)
749 (cd lib; $(MAKE) $(MFLAGS) distclean)
750 (cd lib-src; $(MAKE) $(MFLAGS) distclean)
751 (cd doc/emacs && $(MAKE) $(MFLAGS) distclean)
752 (cd doc/misc && $(MAKE) $(MFLAGS) distclean)
753 (cd doc/lispref && $(MAKE) $(MFLAGS) distclean)
754 (cd doc/lispintro && $(MAKE) $(MFLAGS) distclean)
755 (cd leim; $(MAKE) $(MFLAGS) distclean)
756 (cd lisp; $(MAKE) $(MFLAGS) distclean)
757 ${top_distclean}
759 ### `bootstrap-clean'
760 ### Delete everything that can be reconstructed by `make' and that
761 ### needs to be deleted in order to force a bootstrap from a clean state.
762 bootstrap-clean: FRC
763 (cd src; $(MAKE) $(MFLAGS) bootstrap-clean)
764 (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
765 (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
766 (cd lib; $(MAKE) $(MFLAGS) maintainer-clean)
767 (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
768 -(cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean)
769 -(cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean)
770 -(cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean)
771 -(cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean)
772 (cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
773 (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean)
774 [ ! -f config.log ] || mv -f config.log config.log~
775 ${top_bootclean}
776 ## configure; make bootstrap replaces the real config.log from configure
777 ## with the truncated one from config.status. The former is more useful.
779 ### `maintainer-clean'
780 ### Delete everything from the current directory that can be
781 ### reconstructed with this Makefile. This typically includes
782 ### everything deleted by distclean, plus more: C source files
783 ### produced by Bison, tags tables, info files, and so on.
785 ### One exception, however: `make maintainer-clean' should not delete
786 ### `configure' even if `configure' can be remade using a rule in the
787 ### Makefile. More generally, `make maintainer-clean' should not delete
788 ### anything that needs to exist in order to run `configure' and then
789 ### begin to build the program.
790 top_maintainer_clean=\
791 ${top_distclean}; \
792 rm -fr autom4te.cache
793 maintainer-clean: bootstrap-clean FRC
794 (cd src; $(MAKE) $(MFLAGS) maintainer-clean)
795 (cd lisp; $(MAKE) $(MFLAGS) maintainer-clean)
796 ${top_maintainer_clean}
798 ### This doesn't actually appear in the coding standards, but Karl
799 ### says GCC supports it, and that's where the configuration part of
800 ### the coding standards seem to come from. It's like distclean, but
801 ### it deletes backup and autosave files too.
802 extraclean:
803 for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
804 ${top_maintainer_clean}
805 -rm -f config-tmp-*
806 -rm -f *~ \#*
808 # The src subdir knows how to do the right thing
809 # even when the build directory and source dir are different.
810 .PHONY: TAGS tags
811 TAGS tags: lib lib-src src
812 cd src; $(MAKE) $(MFLAGS) tags
814 check:
815 @if test ! -d test/automated; then \
816 echo "You do not seem to have the test/ directory."; \
817 echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
818 else \
819 cd test/automated && $(MAKE) $(MFLAGS) check; \
822 dist:
823 cd ${srcdir}; ./make-dist
825 .PHONY: info dvi dist check html info-real force-info check-info-dir
827 info-real:
828 (cd doc/emacs; $(MAKE) $(MFLAGS) info)
829 (cd doc/misc; $(MAKE) $(MFLAGS) info)
830 (cd doc/lispref; $(MAKE) $(MFLAGS) info)
831 (cd doc/lispintro; $(MAKE) $(MFLAGS) info)
833 force-info:
834 # Note that man/Makefile knows how to put the info files in $(srcdir),
835 # so we can do ok running make in the build dir.
836 # This used to have a clause that exited with an error if MAKEINFO = no.
837 # But it is inappropriate to do so without checking if makeinfo is
838 # actually needed - it is not if the info files are up-to-date. (Bug#3982)
839 # Only the doc/*/Makefiles can decide that, so we let those rules run
840 # and give a standard error if makeinfo is needed but missing.
841 # While it would be nice to give a more detailed error message, that
842 # would require changing every rule in doc/ that builds an info file,
843 # and it's not worth it. This case is only relevant if you download a
844 # release, then change the .texi files.
845 info: force-info
846 @if test "$(HAVE_MAKEINFO)" = "no"; then \
847 echo "Configured --without-makeinfo, not building manuals" ; \
848 else \
849 $(MAKE) $(MFLAGS) info-real ; \
852 # The info/dir file must be updated by hand when new manuals are added.
853 check-info-dir: info
854 cd info ; \
855 missing= ; \
856 for file in *; do \
857 test -f "$${file}" || continue ; \
858 case $${file} in \
859 *-[0-9]*|COPYING|dir) continue ;; \
860 esac ; \
861 file=`echo $${file} | sed 's/\.info//'` ; \
862 grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
863 done ; \
864 if test -n "$${missing}"; then \
865 echo "Missing info/dir entries: $${missing}" ; \
866 exit 1 ; \
867 fi ; \
868 echo "info/dir is OK"
870 dvi:
871 (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
872 (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
873 (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
874 (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
876 #### Bootstrapping.
878 ### This first cleans the lisp subdirectory, removing all compiled
879 ### Lisp files. Then re-run make to build all the files anew.
881 .PHONY: bootstrap
883 ## configure; make bootstrap replaces the real config.log from configure
884 ## with the truncated one from config.status. The former is more useful.
885 bootstrap: bootstrap-clean FRC
886 if [ -x ./config.status ]; then \
887 ./config.status; \
888 else \
889 ./configure $(CONFIGURE_FLAGS); \
891 $(MAKE) $(MFLAGS) info all
893 .PHONY: check-declare
895 check-declare:
896 @if [ ! -f $(srcdir)/src/emacs ]; then \
897 echo "You must build Emacs to use this command"; \
898 exit 1; \
900 (cd leim; $(MAKE) $(MFLAGS) $@)
901 (cd lisp; $(MAKE) $(MFLAGS) $@)