1 # DIST: This is the distribution Makefile for Emacs. configure can
2 # DIST: make most of the changes to this file you might want, so try
5 # make all to compile and build Emacs.
6 # make install to install it.
7 # make TAGS to update tags tables.
9 # make clean or make mostlyclean
10 # Delete all files from the current directory that are normally
11 # created by building the program. Don't delete the files that
12 # record the configuration. Also preserve files that could be made
13 # by building, but normally aren't because the distribution comes
16 # Delete `.dvi' files here if they are not part of the distribution.
19 # Delete all files from the current directory that are created by
20 # configuring or building the program. If you have unpacked the
21 # source and built the program without creating any other files,
22 # `make distclean' should leave only the files that were in the
25 # make maintainer-clean
26 # Delete everything from the current directory that can be
27 # reconstructed with this Makefile. This typically includes
28 # everything deleted by distclean, plus more: C source files
29 # produced by Bison, tags tables, info files, and so on.
32 # Still more severe - delete backup and autosave files, too.
36 # If Make doesn't predefine MAKE, set it here.
39 # ==================== Things `configure' Might Edit ====================
43 C_SWITCH_SYSTEM
=@c_switch_system@
47 C_SWITCH_X_SITE
=@C_SWITCH_X_SITE@
48 LD_SWITCH_X_SITE
=@LD_SWITCH_X_SITE@
51 ### These help us choose version- and architecture-specific directories
52 ### to install files in.
54 ### This should be the number of the Emacs version we're building,
55 ### like `18.59' or `19.0'.
58 ### This should be the name of the configuration we're building Emacs
59 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
60 configuration
=@configuration@
62 # ==================== Where To Install Things ====================
64 # The default location for installation. Everything is placed in
65 # subdirectories of this directory. The default values for many of
66 # the variables below are expressed in terms of this one, so you may
67 # not need to change them. This defaults to /usr/local.
70 # Like `prefix', but used for architecture-specific files.
71 exec_prefix=@
exec_prefix@
73 # Where to install Emacs and other binaries that people will want to
74 # run directly (like etags).
77 # Where to install architecture-independent data files. ${lispdir}
78 # and ${etcdir} are subdirectories of this.
81 # Where to install and expect the files that Emacs modifies as it
82 # runs. These files are all architecture-independent. Right now, the
83 # only such data is the locking directory; ${lockdir} is a
84 # subdirectory of this.
85 sharedstatedir
=@sharedstatedir@
87 # Where to install and expect executable files to be run by Emacs
88 # rather than directly by users, and other architecture-dependent
89 # data. ${archlibdir} is a subdirectory of this.
90 libexecdir
=@libexecdir@
92 # Where to install Emacs's man pages, and what extension they should have.
96 # Where to install and expect the info files describing Emacs. In the
97 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
98 # since there are now many packages documented with the texinfo
99 # system, it is inappropriate to imply that it is part of Emacs.
102 # Where to look for bitmap files.
103 bitmapdir
=@bitmapdir@
105 # Where to find the source code. The source code for Emacs's C kernel is
106 # expected to be in ${srcdir}/src, and the source code for Emacs's
107 # utility programs is expected to be in ${srcdir}/lib-src. This is
108 # set by the configure script's `--srcdir' option.
111 # Tell make where to find source files; this is needed for the makefiles.
114 # ==================== Emacs-specific directories ====================
116 # These variables hold the values Emacs will actually use. They are
117 # based on the values of the standard Make variables above.
119 # Where to install the lisp files distributed with
120 # Emacs. This includes the Emacs version, so that the
121 # lisp files for different versions of Emacs will install
122 # themselves in separate directories.
125 # Directories Emacs should search for lisp files specific
126 # to this site (i.e. customizations), before consulting
127 # ${lispdir}. This should be a colon-separated list of
129 locallisppath
=@locallisppath@
131 # Where Emacs will search to find its lisp files. Before
132 # changing this, check to see if your purpose wouldn't
133 # better be served by changing locallisppath. This
134 # should be a colon-separated list of directories.
137 # Where Emacs will search for its lisp files while
138 # building. This is only used during the process of
139 # compiling Emacs, to help Emacs find its lisp files
140 # before they've been installed in their final location.
141 # It's usually identical to lisppath, except that
142 # it does not include locallisppath, and the
143 # entry for the directory containing the installed lisp
144 # files has been replaced with ../lisp. This should be a
145 # colon-separated list of directories.
146 buildlisppath
=${srcdir}/lisp
148 # Where to install the other architecture-independent
149 # data files distributed with Emacs (like the tutorial,
150 # the cookie recipes and the Zippy database). This path
151 # usually contains the Emacs version number, so the data
152 # files for multiple versions of Emacs may be installed
156 # Where to create and expect the locking directory, where
157 # the Emacs locking code keeps track of which files are
158 # currently being edited.
161 # Where to put executables to be run by Emacs rather than
162 # the user. This path usually includes the Emacs version
163 # and configuration name, so that multiple configurations
164 # for multiple versions of Emacs may be installed at
166 archlibdir
=@archlibdir@
168 # Where to put the docstring file.
171 # ==================== Utility Programs for the Build ====================
173 # Allow the user to specify the install program.
175 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
176 INSTALL_DATA
= @INSTALL_DATA@
178 # ============================= Targets ==============================
180 # What emacs should be called when installed.
183 # Subdirectories to make recursively. `lisp' is not included
184 # because the compiled lisp files are part of the distribution
185 # and you cannot remake them without installing Emacs first.
188 # The makefiles of the directories in $SUBDIR.
189 SUBDIR_MAKEFILES
= lib-src
/Makefile src
/Makefile oldXMenu
/Makefile lwlib
/Makefile
191 # Subdirectories to install, and where they'll go.
192 # lib-src's makefile knows how to install it, so we don't do that here.
193 # When installing the info files, we need to do special things to
194 # avoid nuking an existing dir file, so we don't do that here;
195 # instead, we have written out explicit code in the `install' targets.
196 COPYDIR
= ${srcdir}/etc
${srcdir}/lisp
197 COPYDESTS
= ${etcdir} ${lispdir}
199 all: paths-force
${SUBDIR}
201 removenullpaths
=sed
-e
's/^://g' -e
's/:$$//g' -e
's/::/:/g'
203 # Note that sed is not in /bin on 386bsd.
204 src
/paths.h
: Makefile
${srcdir}/src
/paths.h.in
205 @echo
"Producing \`src/paths.h' from \`src/paths.h.in'."
206 @
(lisppath
=`echo ${lisppath} | ${removenullpaths}` ; \
207 buildlisppath
=`echo ${buildlisppath} | ${removenullpaths}` ; \
208 sed
< ${srcdir}/src
/paths.h.in
> paths.h.tmp
$$$$ \
209 -e
's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
210 -e
's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
211 -e
's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
212 -e
's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
213 -e
's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
214 -e
's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
215 -e
's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
216 -e
's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') && \
217 ${srcdir}/move-if-change paths.h.tmp
$$$$ src
/paths.h
220 # we force the rebuilding of src/paths.h because the user might give
221 # make different values for the various directories. Since we use
222 # move-if-change, src/paths.h only actually changes if the user did
223 # something notable, so the only unnecessary work we do is in building
224 # paths.h.tmp$$$$, which isn't much.
225 # Note that sed is not in /bin on 386bsd.
226 # We depend on src/paths.h here to prevent simultaneous execution of
227 # that rule and this one, in a parallel make.
228 # It is possible for paths.h to be updated twice--but that would happen anyway.
229 paths-force
: FRC src
/paths.h
230 @echo
"Producing \`src/paths.h' from \`src/paths.h.in'."
231 @
(lisppath
=`echo ${lisppath} | ${removenullpaths}` ; \
232 buildlisppath
=`echo ${buildlisppath} | ${removenullpaths}` ; \
233 sed
< ${srcdir}/src
/paths.h.in
> paths.h.tmp
$$$$ \
234 -e
's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
235 -e
's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
236 -e
's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
237 -e
's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
238 -e
's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
239 -e
's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
240 -e
's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
241 -e
's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') && \
242 ${srcdir}/move-if-change paths.h.tmp
$$$$ src
/paths.h
244 src
: lib-src FRC src
/paths.h
246 # This ought to depend on src/paths.h, so that in parallel make
247 # src/paths.h will be available for the compilations in lib-src.
248 # But that causes trouble in `make install' if a different prefix
249 # is specified at that time.
250 lib-src
: FRC src
/paths.h
252 .RECURSIVE
: ${SUBDIR}
254 ${SUBDIR}: ${SUBDIR_MAKEFILES} FRC
255 cd
$@
; $(MAKE
) all $(MFLAGS
) \
256 CC
='${CC}' CFLAGS
='${CFLAGS}' CPPFLAGS
='${CPPFLAGS}' \
257 LDFLAGS
='${LDFLAGS}' MAKE
='${MAKE}'
259 blessmail
: ${SUBDIR_MAKEFILES} src FRC
260 cd lib-src
; $(MAKE
) maybe-blessmail
$(MFLAGS
) \
261 MAKE
='${MAKE}' archlibdir
='$(archlibdir)'
263 Makefile
: Makefile.in config.status
266 src
/Makefile
: src
/Makefile.in.in config.status
269 lib-src
/Makefile
: lib-src
/Makefile.in config.status
272 oldXMenu
/Makefile
: oldXMenu
/Makefile.in config.status
275 lwlib
/Makefile
: lwlib
/Makefile.in config.status
278 # ==================== Installation ====================
280 ## If we let lib-src do its own installation, that means we
281 ## don't have to duplicate the list of utilities to install in
282 ## this Makefile as well.
284 ## On AIX, use tar xBf.
285 ## On Xenix, use tar xpf.
287 .PHONY
: install mkdir
289 ## We delete each directory in ${COPYDESTS} before we copy into it;
290 ## that way, we can reinstall over directories that have been put in
291 ## place with their files read-only (perhaps because they are checked
292 ## into RCS). In order to make this safe, we make sure that the
293 ## source exists and is distinct from the destination.
294 ## We don't depend on `all', but rather on ${SUBDIR}, so that we won't
295 ## ever modify src/paths.h.
296 install: ${SUBDIR} install-arch-dep install-arch-indep blessmail
;
298 ### Note that we copy the DOC-* files from the build etc directory
299 ### as well as lots of things from ${srcdir}/etc.
300 install-arch-dep
: mkdir
302 $(MAKE
) install $(MFLAGS
) prefix=${prefix} \
303 exec_prefix=${exec_prefix} bindir=${bindir} \
304 libexecdir
=${libexecdir} archlibdir
=${archlibdir})
305 ${INSTALL_PROGRAM} src
/emacs
${bindir}/emacs-
${version}
306 -chmod
1755 ${bindir}/emacs-
${version}
307 rm -f
${bindir}/$(EMACS
)
308 -ln
${bindir}/emacs-
${version} ${bindir}/$(EMACS
)
310 ### Note that we copy the DOC-* files from the build etc directory
311 ### as well as lots of things from ${srcdir}/etc.
313 install-arch-indep
: mkdir
314 -set
${COPYDESTS} ; \
315 for
dir in
${COPYDIR} ; do \
316 if
[ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
321 -set
${COPYDESTS} ; \
322 mkdir
${COPYDESTS} ; \
323 chmod ugo
+rx
${COPYDESTS} ; \
324 for
dir in
${COPYDIR} ; do \
327 && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
328 && (echo
"Copying $${dir}..." ; \
329 (cd
$${dir}; tar -cf
- .
)|
(cd
$${dest};umask
022; tar -xvf
- ); \
330 for subdir in
`find $${dest} -type d ! -name RCS -print` ; do \
331 rm -rf
$${subdir}/RCS
; \
332 rm -rf
$${subdir}/CVS
; \
333 rm -f
$${subdir}/\
#* ; \
334 rm -f
$${subdir}/.\
#* ; \
335 rm -f
$${subdir}/*~
; \
336 rm -f
$${subdir}/*.orig
; \
339 -rm -f
${lispdir}/subdirs.el
340 $(srcdir)/update-subdirs
${lispdir}
341 if
[ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
343 echo
"Copying etc/DOC-* ..." ; \
344 (cd etc
; tar -cf
- DOC-
*)|
(cd
${docdir}; umask
0; tar -xvf
- ); \
346 thisdir
=`/bin/pwd`; \
347 if
[ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
349 (cd
${srcdir}/info ; \
350 if
[ ! -f
${infodir}/dir ] && [ -f
dir ]; then \
351 (cd
$${thisdir}; ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir); \
353 for f in cl
* dired-x
* emacs
* forms
* gnus
* info* sc
* vip
* ; do \
354 (cd
$${thisdir}; ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f); \
357 thisdir
=`/bin/pwd`; cd
${srcdir}/etc
; for page in emacs etags ctags
; do \
358 (cd
$${thisdir}; ${INSTALL_DATA} ${srcdir}/etc
/$${page}.1 ${mandir}/$${page}${manext}); \
361 ### Build all the directories we're going to install Emacs in. Since
362 ### we may be creating several layers of directories (for example,
363 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
364 ### instead of mkdir. Not all systems' mkdir programs have the `-p' flag.
366 $(srcdir)/mkinstalldirs
${COPYDESTS} ${lockdir} ${infodir} ${mandir} \
367 ${bindir} ${datadir} ${docdir} ${libexecdir} \
368 `echo ${locallisppath} | sed 's/:/ /g'`
369 -chmod
777 ${lockdir}
371 ### Delete all the installed files that the `install' target would
372 ### create (but not the noninstalled files such as `make all' would
375 ### Don't delete the lisp and etc directories if they're in the source tree.
378 $(MAKE
) $(MFLAGS
) uninstall \
379 prefix=${prefix} exec_prefix=${exec_prefix} \
380 bindir=${bindir} libexecdir
=${libexecdir} archlibdir
=${archlibdir})
381 for
dir in
${lispdir} ${etcdir} ; do \
382 if
[ -d
$${dir} ]; then \
383 case
`(cd $${dir} ; /bin/pwd)` in \
384 `(cd ${srcdir} ; /bin/pwd)`* ) ;; \
385 * ) rm -rf
$${dir} ;; \
388 ${datadir}/emacs
/${version}/* ) \
389 rm -rf
${datadir}/emacs
/${version} \
394 (cd
${infodir} && rm -f cl
* emacs
* forms
* info* vip
*)
395 (cd
${mandir} && rm -f emacs
.1 etags
.1 ctags
.1)
396 (cd
${bindir} && rm -f emacs-
${version} $(EMACS
))
401 # ==================== Cleaning up and miscellanea ====================
403 .PHONY
: mostlyclean clean distclean maintainer-clean extraclean
406 ### Like `clean', but may refrain from deleting a few files that people
407 ### normally don't want to recompile. For example, the `mostlyclean'
408 ### target for GCC does not delete `libgcc.a', because recompiling it
409 ### is rarely necessary and takes a lot of time.
411 (cd src
; $(MAKE
) $(MFLAGS
) mostlyclean)
412 (cd oldXMenu
; $(MAKE
) $(MFLAGS
) mostlyclean)
413 (cd lwlib
; $(MAKE
) $(MFLAGS
) mostlyclean)
414 (cd lib-src
; $(MAKE
) $(MFLAGS
) mostlyclean)
415 -(cd man
&& $(MAKE
) $(MFLAGS
) mostlyclean)
418 ### Delete all files from the current directory that are normally
419 ### created by building the program. Don't delete the files that
420 ### record the configuration. Also preserve files that could be made
421 ### by building, but normally aren't because the distribution comes
424 ### Delete `.dvi' files here if they are not part of the distribution.
426 (cd src
; $(MAKE
) $(MFLAGS
) clean)
427 (cd oldXMenu
; $(MAKE
) $(MFLAGS
) clean)
428 (cd lwlib
; $(MAKE
) $(MFLAGS
) clean)
429 (cd lib-src
; $(MAKE
) $(MFLAGS
) clean)
430 -(cd man
&& $(MAKE
) $(MFLAGS
) clean)
433 ### Delete all files from the current directory that are created by
434 ### configuring or building the program. If you have unpacked the
435 ### source and built the program without creating any other files,
436 ### `make distclean' should leave only the files that were in the
439 rm -f config.status
; \
440 rm -f Makefile
${SUBDIR_MAKEFILES} ; \
443 (cd src
; $(MAKE
) $(MFLAGS
) distclean)
444 (cd oldXMenu
; $(MAKE
) $(MFLAGS
) distclean)
445 (cd lwlib
; $(MAKE
) $(MFLAGS
) distclean)
446 (cd lib-src
; $(MAKE
) $(MFLAGS
) distclean)
447 (cd man
&& $(MAKE
) $(MFLAGS
) distclean)
451 ### `maintainer-clean'
452 ### Delete everything from the current directory that can be
453 ### reconstructed with this Makefile. This typically includes
454 ### everything deleted by distclean, plus more: C source files
455 ### produced by Bison, tags tables, info files, and so on.
457 ### One exception, however: `make maintainer-clean' should not delete
458 ### `configure' even if `configure' can be remade using a rule in the
459 ### Makefile. More generally, `make maintainer-clean' should not delete
460 ### anything that needs to exist in order to run `configure' and then
461 ### begin to build the program.
462 maintainer-clean
: FRC
463 (cd src
; $(MAKE
) $(MFLAGS
) maintainer-clean
)
464 (cd oldXMenu
; $(MAKE
) $(MFLAGS
) maintainer-clean
)
465 (cd lwlib
; $(MAKE
) $(MFLAGS
) maintainer-clean
)
466 (cd lib-src
; $(MAKE
) $(MFLAGS
) maintainer-clean
)
467 -(cd man
&& $(MAKE
) $(MFLAGS
) maintainer-clean
)
470 ### This doesn't actually appear in the coding standards, but Karl
471 ### says GCC supports it, and that's where the configuration part of
472 ### the coding standards seem to come from. It's like distclean, but
473 ### it deletes backup and autosave files too.
475 for i in
${SUBDIR}; do
(cd
$$i; $(MAKE
) $(MFLAGS
) extraclean
); done
477 -rm config.status config-tmp-
*
480 ### Unlocking and relocking. The idea of these productions is to reduce
481 ### hassles when installing an incremental tar of Emacs. Do `make unlock'
482 ### before unlocking the file to take the write locks off all sources so
483 ### that tar xvof will overwrite them without fuss. Then do `make relock'
484 ### afterward so that VC mode will know which files should be checked in
485 ### if you want to mung them.
487 ### Note: it's no disaster if these productions miss a file or two; tar
488 ### and VC will swiftly let you know if this happens, and it is easily
490 SOURCES
= ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
491 README configure make-dist move-if-change
493 .PHONY
: unlock relock
496 chmod u
+w
$(SOURCES
) cpp/*
497 -(cd elisp
; chmod u
+w Makefile README
*.texi
)
498 (cd etc
; $(MAKE
) $(MFLAGS
) unlock
)
499 (cd lib-src
; $(MAKE
) $(MFLAGS
) unlock
)
500 (cd lisp
; $(MAKE
) $(MFLAGS
) unlock
)
501 (cd lisp
/term
; chmod u
+w README
*.el
)
502 (cd man
; chmod u
+w
*texi
* ChangeLog split-man
)
503 (cd oldXMenu
; chmod u
+w
*.
[ch
] Makefile README
)
504 (cd lwlib
; chmod u
+w
*.
[ch
] Makefile README
)
505 (cd src
; $(MAKE
) $(MFLAGS
) unlock
)
508 chmod u-w
$(SOURCES
) cpp/*
509 -(cd elisp
; chmod u-w Makefile README
*.texi
)
510 (cd etc
; $(MAKE
) $(MFLAGS
) relock
)
511 (cd lib-src
; $(MAKE
) $(MFLAGS
) relock
)
512 (cd lisp
; $(MAKE
) $(MFLAGS
) relock
)
513 (cd lisp
/term
; chmod u
+w README
*.el
)
514 (cd man
; chmod u
+w
*texi
* ChangeLog split-man
)
515 (cd oldXMenu
; chmod u
+w
*.
[ch
] Makefile README
)
516 (cd lwlib
; chmod u
+w
*.
[ch
] Makefile README
)
517 (cd src
; $(MAKE
) $(MFLAGS
) relock
)
520 cd
${srcdir}/src
; $(MAKE
) tags
523 @echo
"We don't have any tests for GNU Emacs yet."
526 $(srcdir)/update-subdirs
${srcdir}/lisp
527 cd
${srcdir}; make-dist
529 .PHONY
: info dvi dist check
532 (cd
${srcdir}/man
; $(MAKE
) $(MFLAGS
) info)
534 (cd man
; $(MAKE
) $(MFLAGS
) dvi)