1 2000-12-27 Eli Zaretskii <eliz@is.elta.co.il>
3 * INSTALL: Add basic installation procedure which assumes
4 `configure' does its job. Elaborate on image support libraries.
5 Add a pointer to Xaw3d library. Add advice about solving
6 configure-time problems by looking in config.log and setting
7 variables in the envoronment.
9 2000-12-27 Gerd Moellmann <gerd@gnu.org>
11 * Makefile.in (install-arch-indep): If tar fails, exit with
14 2000-12-19 Gerd Moellmann <gerd@gnu.org>
16 * configure.in: Test for XkbGetKeyboard with an AC_TRY_LINK whose
17 source file includes XKBlib.h. On some broken Solaris systems,
18 there is an XKBlib.h, reportedly, but header files included by
21 2000-12-14 Gerd Moellmann <gerd@gnu.org>
23 * configure.in: AC_CHECK_FUNC XkbGetKeyboard.
25 2000-12-11 Dave Love <fx@gnu.org>
27 * configure.in <alpha*-dec-osf*>: Use full path for NON_GNU_CPP.
29 2000-12-11 Paul Eggert <eggert@twinsun.com>
31 * aclocal.m4 (AC_SYS_LARGEFILE, AC_SYS_LARGEFILE_MACRO_VALUE):
32 Merge fixes from latest GNU tar version. These macros no longer
33 futz with _XOPEN_SOURCE, as that was not portable in practice.
34 (AC_FUNC_FSEEKO): New macro.
36 * configure.in: Use it instead of invoking AC_CHECK_FUNCS on
39 2000-12-05 Dave Love <fx@gnu.org>
41 * Makefile.in (TAGS, info): Avoid tab-prefixed comments in rules.
43 2000-12-02 Eli Zaretskii <eliz@is.elta.co.il>
45 * info/dir: Change the category to "Emacs".
47 2000-12-01 Gerd Moellmann <gerd@gnu.org>
49 * make-dist (tempdir): Remove epaths.h from the distribution
52 2000-11-23 Eli Zaretskii <eliz@is.elta.co.il>
54 * config.bat: Check for existence of djecho.exe, and print an
55 error message if it is not available.
57 * INSTALL: Describe possible problem with djecho.exe in old
58 versions of DJGPP v2.x.
60 2000-11-23 Gerd Moellmann <gerd@gnu.org>
62 * configure.in: Initialize HAVE_LIBXP to no.
64 2000-11-22 Gerd Moellmann <gerd@gnu.org>
66 * configure.in: Use m/macppc.h instead of the non-existent
69 2000-11-21 Gerd Moellmann <gerd@gnu.org>
71 * Makefile.in (install-arch-indep): Also install info/eshell*
74 * configure.in (HAVE_PNG): Check for the presence of
75 png_get_channels to rule out older PNG libs.
77 * configure.in (AC_OUTPUT): Arrange to emit definitions of
78 GCC and NON_GNU_CPP into config.status.
80 2000-11-20 Dave Love <fx@gnu.org>
82 * configure.in: Fix last change.
84 * GETTING.GNU.SOFTWARE: Deleted.
85 * FTP: New file to replace it.
86 * make-dist: Add FTP, remove GETTING.GNU.SOFTWARE.
88 2000-11-20 Gerd Moellmann <gerd@gnu.org>
90 * configure.in: Use -traditional with GNU cpp.
92 2000-11-17 Gerd Moellmann <gerd@gnu.org>
94 * make-dist: Handle the Mac port. Distribute all makefile.w32-in.
95 Distribute more files from the nt/ subdir. Distribute PBM
96 image files from subdirs of lisp/. Distribute old change logs
97 from subdirs of lisp/. Distribute play/5x5.el.
99 2000-11-11 Dave Love <fx@gnu.org>
101 * config.sub, config.guess: Updated from master source.
103 2000-11-07 Dave Love <fx@gnu.org>
105 * configure.in: Test for mkstemp.
107 2000-11-01 Eli Zaretskii <eliz@is.elta.co.il>
109 * info/dir (Top): Rearrange menu items more logically, and put
110 them into a single category. Add menu items for RefTeX and
113 2000-10-29 Kai Gro
\e,A_
\e(Bjohann <Kai.Grossjohann@CS.Uni-Dortmund.DE>
115 * Makefile.in (install-arch-indep): Use --info-dir instead of
116 --dir-file, and a simple argument instead of --info-file, so that
117 the Debian version of install-info also works.
119 2000-10-19 Eric M. Ludlam <zappo@ultranet.com>
121 * info/dir (Speedbar): Add entry.
123 2000-10-16 Eli Zaretskii <eliz@is.elta.co.il>
125 * INSTALL: Describe the new image-support options to the configure
126 script. List URLs where image support libraries can be found.
128 2000-10-14 Eli Zaretskii <eliz@is.elta.co.il>
130 * info/dir (Top): Add an entry for Eshell.
132 2000-10-02 Dave Love <fx@gnu.org>
134 * configure.in: Check for gai_strerror.
136 2000-10-01 Andreas Schwab <schwab@suse.de>
138 * Makefile.in (install-arch-indep): Update list of installed info
141 2000-09-30 Gerd Moellmann <gerd@gnu.org>
143 * configure.in: Support `sparc*-*-netbsd*'.
145 2000-09-29 Eli Zaretskii <eliz@is.elta.co.il>
147 * info/dir (MIME): Add entry for emacs-mime.
149 2000-09-29 Dave Love <fx@gnu.org>
151 * configure.in: Fix alpha*-dec-osf4 using the osf5 config.
153 2000-09-26 Gerd Moellmann <gerd@gnu.org>
155 * make-dist: Adapt to the change of leim/Makefile which was
156 necessary to ensure a reasonably working `make dist'.
158 * leim-Makefile.in: Moved to leim/Makefile.in..
160 * noleim-Makefile.in: New file, formerly leim/Makefile.in.
162 2000-09-21 Kenichi Handa <handa@etl.go.jp>
164 * leim-Makefile.in (TIT-GB, TIT-BIG5, NON-TIT-GB, NON-TIT-BIG5)
165 (NON-TIT-CNS, JAPANESE, KOREAN, THAI, VIETNAMESE, LAO, INDIAN)
166 (TIBETAN, LATIN, SLAVIC, GREEK, RUSSIAN, MISC): Rename all .el
168 (${TIT}): Adjusted for the above change.
169 (clean mostlyclean): Likewise.
170 (.el.elc): New target.
172 2000-09-19 Gerd Moellmann <gerd@gnu.org>
174 * make-dist: Include XPM and XBM files in lisp/ and subdirs
177 2000-09-18 Gerd Moellmann <gerd@gnu.org>
179 * make-dist (skk): Rename to `ja-dic' because the leim directory
182 2000-09-14 Dave Love <fx@gnu.org>
184 * configure.in: Fix spurion in last change.
186 2000-09-14 Gerd Moellmann <gerd@gnu.org>
188 * configure.in (USE_MMAP_FOR_BUFFERS): Recognize in system
189 configuration files instead of REL_ALLOC_MMAP. Set REL_ALLOC
190 to `no' if defined. Change result report.
192 2000-09-08 Dave Love <fx@gnu.org>
194 * configure.in: Remove spurious `@'s.
196 * aclocal.m4 (AC_FUNC_MMAP): Use fixed version from development
199 2000-09-06 Gerd Moellmann <gerd@gnu.org>
201 * configure.in (REL_ALLOC_MMAP): Recognize in system configuration
202 file and print informational message.
204 * configure.in (AC_FUNC_MMAP): Add.
206 2000-09-01 Gerd Moellmann <gerd@gnu.org>
208 * configure.in: Add ``checking'' messages for
209 XpmReturnAllocPixels.
211 2000-08-28 Gerd Moellmann <gerd@gnu.org>
213 * configure.in: Check <strings.h>; check `index' and `rindex'
216 2000-08-26 Kenichi Handa <handa@etl.go.jp>
218 * configure.in <alpha*-dec-osf*>: Move "NON_GNU_CPP='cpp'" before
219 "case "${canonical}" in".
221 2000-08-25 Dave Love <fx@gnu.org>
223 * configure.in <osf>: Use NON_GNU_CPP='cpp' always.
225 2000-08-25 Kenichi Handa <handa@etl.go.jp>
227 * leim-Makefile.in: Rename skk to ja-dic throughout the file.
229 2000-08-24 Gerd Moellmann <gerd@gnu.org>
231 * configure.in <making srcdir absolute>: Unset CDPATH in case $PWD
232 contains a relative path. Protect against unusable values of
235 2000-08-08 Eli Zaretskii <eliz@is.elta.co.il>
237 * info/dir (WoMan): Add entry.
239 * config.bat (maindir): Update src/_gdbinit even if it does
242 2000-08-07 Gerd Moellmann <gerd@gnu.org>
244 * Makefile.in (config.status): Prepend `$(srcdir)/' to
247 2000-08-03 Gerd Moellmann <gerd@gnu.org>
249 * configure.in: Add support for ia64*-*-linux*.
251 2000-07-27 Gerd Moellmann <gerd@gnu.org>
253 * make-dist (aclocal.m4): Include in distribution.
255 2000-07-26 Dave Love <fx@gnu.org>
257 * configure.in (AC_SYS_LARGEFILE): Moved earlier.
259 2000-07-24 Dave Love <fx@gnu.org>
261 * configure.in: Add AC_SIZE_T.
263 2000-07-18 Dave Love <fx@gnu.org>
265 * configure.in: Reorder so that most tests are done after CPPFLAGS
266 is set from the C_SWITCH_... definitions.
268 2000-07-10 Gerd Moellmann <gerd@gnu.org>
270 * configure.in (HAVE_XPM): Undo previous change. Check for
271 preprocessor define XpmReturnAllocPixels.
273 2000-07-06 Gerd Moellmann <gerd@gnu.org>
275 * configure.in (HAVE_XPM): Check for XpmReturnAllocPixels
276 instead of XpmReadFileToPixmap.
278 2000-07-05 Ken Raeburn <raeburn@gnu.org>
280 * configure.in: Check for <soundcard.h>. Look for ossaudio
281 library, and set LIBSOUND accordingly.
283 2000-07-05 Dave Love <fx@gnu.org>
285 * configure.in: Use AC_HEADER_SYS_WAIT.
287 2000-07-05 Gerd Moellmann <gerd@gnu.org>
289 * make-dist: Check DONTCOMPILE in lisp/Makefile.in instead of
290 lisp/Makefile. Distribute lisp/Makefile.in instead of
293 2000-06-30 Ken Raeburn <raeburn@gnu.org>
295 * configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS,
296 while searching for image-handling libraries.
298 2000-06-26 Gerd Moellmann <gerd@gnu.org>
300 * configure.in (--with-xim): New option.
302 2000-06-23 Dave Love <fx@gnu.org>
304 * configure.in [HAVE_TIMEVAL]: Move gettimeofday test here, test
305 for struct timezone and test how we can call gettimeofday.
306 Check for OSF 5+. Check for term.h.
308 * aclocal.m4: Define the post-2.13 stuff conditionally on autoconf
311 2000-06-23 Gerd Moellmann <gerd@gnu.org>
313 * configure.in (HAVE_LIBXP): Change test for libXp.
315 2000-06-21 Dave Love <fx@gnu.org>
317 * configure.in: Check for fcntl.h. Use AC_FUNC_GETLOADAVG, not
318 simple test for getloadavg and substitute GETLOADAVG_LIBS.
319 Simplify test for GETTIMEOFDAY_ONE_ARGUMENT.
321 2000-06-19 Dave Love <fx@gnu.org>
323 * configure.in (GETTIMEOFDAY_ONE_ARGUMENT): Fix in case
324 _XOPEN_SOURCE is defined.
326 2000-06-16 Gerd Moellmann <gerd@gnu.org>
328 * Makefile.in (distclean): Also make distclean in lisp/.
330 2000-06-15 Eli Zaretskii <eliz@is.elta.co.il>
332 * config.bat: Generate lisp/Makefile from lisp/Makefile.in.
334 2000-06-15 Gerd Moellmann <gerd@gnu.org>
336 * make-dist: Add --help and --snapshot options.
338 2000-06-14 Gerd Moellmann <gerd@gnu.org>
340 * configure.in: Generate lisp/Makefile.
342 * configure.in: Add support for `*-lynxos*'.
343 Use `cpp' as NON_GNU_CPP for `alpha*-dec-osf[5-9]*', as
344 recommended by <Karen.Dorhamer@compaq.com> to fix problems
347 2000-06-13 Ken Raeburn <raeburn@gnu.org>
349 * Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when
350 it's on a continuation line.
352 2000-06-02 Dave Love <fx@gnu.org>
354 * Makefile.in: (install-arch-indep): Add pcl-cvs to list of info
357 * configure.in: Don't specify -n32 flag for mips-sgi-irix6.5.
358 Check for struct exception. Use AC_SYS_LARGEFILE and move ftello
361 * aclocal.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES)
362 (AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New.
364 2000-05-26 Gerd Moellmann <gerd@gnu.org>
366 * configure.in: Add check for speed_t typedef.
368 2000-05-25 Ken Raeburn <raeburn@gnu.org>
370 * Makefile.in (install-arch-dep): Install fns-*.el only if it
371 exists; it won't in the CANNOT_DUMP case.
373 2000-05-25 Gerd Moellmann <gerd@gnu.org>
375 * Makefile.in: Ignore exit status of `unset CDPATH' everywhere.
376 On FreeBSD, the exit status is 1 if CDPATH is not set.
377 (install-arch-indep): Install ebrowse.info.
379 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
381 * configure.in: Check for grandpt and getpt.
383 2000-05-09 Dave Love <fx@gnu.org>
385 * Makefile.in (install-arch-indep): Filter CVS as well as RCS.
387 2000-05-05 Gerd Moellmann <gerd@gnu.org>
389 * make-dist: Make a link for lib-src/grep-changelog. Copy
392 2000-05-01 Eli Zaretskii <eliz@is.elta.co.il>
394 * config.bat: Identify the beginning of the cpp stuff in
395 src/Makefile.in and lib-src/Makefile.in more accurately.
397 2000-04-27 Gerd Moellmann <gerd@gnu.org>
399 * configure.in: Add support for `powerpc*-*-linux-gnu*'.
401 2000-04-19 Gerd Moellmann <gerd@gnu.org>
403 * configure.in: Add support for `powerpc-*-netbsd*'.
405 2000-04-19 Dave Love <fx@gnu.org>
407 * configure.in: Don't use AC_FUNC_GETLOADAVG.
409 * aclocal.m4 (AC_FUNC_MKTIME): Use AC_SUBST.
411 2000-04-16 Dave Love <fx@gnu.org>
413 * Makefile.in (${srcdir}/configure): Depend on aclocal.m4.
415 2000-04-14 Dave Love <fx@gnu.org>
417 * configure.in: Use AC_FUNC_GETLOADAVG, AC_FUNC_MKTIME.
419 * aclocal.m4 (AC_FUNC_MKTIME): New.
421 2000-03-28 Ken Raeburn <raeburn@gnu.org>
423 * configure.in: Line up "--help" output a little better.
425 2000-03-26 Gerd Moellmann <gerd@gnu.org>
427 * Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src):
429 (bootstrap): Rewritten in terms of the new targets above. Make
432 2000-03-12 Gerd Moellmann <gerd@gnu.org>
434 * config.guess, config.sub: Use the versions of the files from
437 2000-03-08 Dave Love <fx@gnu.org>
439 * configure.in: Use AC_PROG_RANLIB, AC_C_PROTOTYPES,
440 AC_C_VOLATILE. Define POINTER_TYPE.
442 * aclocal.m4: New file.
444 2000-03-02 Gerd Moellmann <gerd@gnu.org>
446 * configure.in (machine): Add `mipsel-*-netbsd*' and
449 2000-03-01 Gerd Moellmann <gerd@gnu.org>
451 * configure.in (machine): Add support for `*-auspex-sunos*'.
453 2000-02-29 Gerd Moellmann <gerd@gnu.org>
455 * configure.in (C_OPTIMIZE_SWITCH) [__GNUC__]: Use -O2.
457 2000-02-18 Dave Love <fx@gnu.org>
459 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
461 2000-02-18 Andreas Schwab <schwab@suse.de>
463 * Makefile.in (install-arch-indep): Add eudc to list of installed
466 2000-02-17 Ken Raeburn <raeburn@gnu.org>
468 * configure.in: Include -lz and -ljpeg (if it's available) when
469 testing for the tiff library.
471 2000-02-17 Gerd Moellmann <gerd@gnu.org>
473 * configure.in: Remove LISP_FLOAT_TYPE.
475 2000-02-12 Dave Love <fx@gnu.org>
477 * configure.in: Use AC_FUNC_VFORK.
479 2000-02-01 Gerd Moellmann <gerd@gnu.org>
481 * make-dist: Various fixes for new development tree.
483 * leim-Makefile.in: New file.
485 2000-01-31 Gerd Moellmann <gerd@gnu.org>
487 * Makefile.in (dist): Call ./make-dist.
489 2000-01-24 Dave Love <fx@gnu.org>
491 * configure.in: Remove -G0 from Irix NON_GCC_TEST_OPTIONS.
493 2000-01-18 Gerd Moellmann <gerd@gnu.org>
495 * configure.in (HAVE_GIF): Check for DGifOpen instead of
498 2000-01-11 Andreas Schwab <schwab@suse.de>
500 * Makefile.in (install-arch-indep): Update list of info files to
503 2000-01-05 Dave Love <fx@gnu.org>
505 * configure.in: Check for jerror.h as well as libjpeg.
507 2000-01-03 Andreas Schwab <schwab@suse.de>
509 * Makefile.in (install-arch-indep): Install autotype*. Run
510 install-info on autotype and emacs-faq.info.
512 1999-12-04 Dave Love <fx@gnu.org>
514 * Makefile.in: (install-arch-indep): Depend on `info'.
515 (install-strip): Use `install' as sub-make target.
517 1999-11-23 Ken Raeburn <raeburn@gnu.org>
519 * configure.in: Restore Kerberos code deleted on 1999-05-29 that
520 didn't need to be deleted. Check for the k5crypto library as well
521 as the crypto library; MIT Kerberos 1.1 changed the name.
523 1999-11-18 Dave Love <fx@gnu.org>
525 * configure.in: Fix NON_GNU_CPP for Irix 6 to avoid failing tests.
527 1999-11-11 Erik Naggum <erik@naggum.no>
529 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
531 1999-11-08 Dave Love <fx@gnu.org>
533 * configure.in: Fix change for --with-pop default.
535 1999-11-04 Dave Love <fx@gnu.org>
537 * configure.in: Default to --with-pop. Change sense of with-gcc
538 and with-toolkit-scroll-bars messages to reflect the defaults.
540 1999-11-01 Gerd Moellmann <gerd@gnu.org>
542 * INSTALL: Mention the Emacs Lisp Reference.
544 1999-10-27 Noah Friedman <friedman@splode.com>
546 * configure.in: Check for dynamic ptys (/dev/ptmx, /dev/pts/).
548 1999-10-23 Gerd Moellmann <gerd@gnu.org>
550 * Makefile.in (bootstrap): New target.
552 1999-10-19 Paul Eggert <eggert@twinsun.com>
554 Add support for large files. Merge glibc 2.1.2.
556 * configure.in (AC_CHECK_HEADERS): Add stdio_ext.h.
557 (HAVE_TM_GMTOFF): New symbol.
558 (AC_CHECK_FUNCS): Add __fpending, ftello, getloadavg, mblen,
560 (LOCALTIME_CACHE): Don't include stdlib.h, as config.h does this now.
562 1999-10-09 Stefan Monnier <monnier@cs.yale.edu>
564 * make-dist (dontcompile): look for the DONTCOMPILE variable rather
565 than the obsolete dontcompilefiles pseudo-rule in lisp/Makefile.
567 1999-10-09 Richard M. Stallman <rms@gnu.org>
569 * Makefile.in (uninstall, install-arch-indep, install-arch-dep):
570 Unset CDPATH to prevent cd from generating output.
572 1999-10-08 Stefan Monnier <monnier@cs.yale.edu>
574 * update-subdirs: also ignore CVS subdirs.
576 1999-10-07 Gerd Moellmann <gerd@gnu.org>
578 * Makefile.in (install-arch-indep): Add ada-mode.
580 1999-10-06 Dave Love <fx@gnu.org>
582 * Makefile.in: Add rules for config.status, configure.
584 1999-09-07 Gerd Moellmann <gerd@gnu.org>
586 * configure.in (--with-sound): Removed.
588 1999-08-30 Gerd Moellmann <gerd@gnu.org>
590 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after
592 (HAVE_TIFF): Add -lm to library check.
594 1999-08-28 Richard Stallman <rms@gnu.org>
596 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for
597 -lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down
598 after the other X-related libraries.
600 1999-08-21 Dave Love <fx@gnu.org>
602 * configure.in: Don't check for jpeglib.h.
604 1999-08-20 Gerd Moellmann <gerd@gnu.org>
606 * configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h.
607 (HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none.
609 1999-08-18 Dave Love <fx@gnu.org>
611 * configure.in: : Check for termcap.h.
613 1999-08-15 Gerd Moellmann <gerd@gnu.org>
615 * configure.in: Add --with-toolkit-scroll-bars. If "no",
616 use Emacs' scroll bars, even if configured for Motif or when
619 1999-08-12 Wolfgang Rupprecht <wolfgang@wsrcc.com>
621 * configure.in: Check for getaddrinfo.
623 1999-08-04 Eli Zaretskii <eliz@gnu.org>
625 * config.bat: Make --no-debug work again by removing -gcoff.
627 1999-07-30 Dave Love <fx@gnu.org>
629 * configure.in: Check for stdlib.h.
631 1999-07-19 Dave Love <fx@gnu.org>
633 * configure.in: Grok sparc64-*-linux-gnu*.
635 After the release of 20.4, development was split into two separate
636 code lines. One line contained the code for Emacs 21, and the other
637 one the code for the 20.x releases after 20.4. The following change
638 log entries up to the entry ``20.4 released'' are for the 20.x code
639 line. Change logs above this notice are those for the 21.x code line.
641 2000-06-13 Gerd Moellmann <gerd@gnu.org>
643 * Version 20.7 released.
645 2000-06-05 Gerd Moellmann <gerd@gnu.org>
647 * configure.in: Add powerpc*-*-linux-gnu*.
649 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
651 * configure.in: Check for grandpt and getpt.
653 2000-02-26 Gerd Moellmann <gerd@gnu.org>
655 * Version 20.6 released.
657 2000-02-18 Dave Love <fx@gnu.org>
659 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
661 2000-02-15 Gerd Moellmann <gerd@gnu.org>
663 * configure.in: Add support for arm*-g*-linux-gnu* systems.
665 1999-12-04 Gerd Moellmann <gerd@gnu.org>
667 * Version 20.5 released.
669 1999-11-28 Dave Love <fx@gnu.org>
671 * configure.in: Recognize sparc64-*-linux-gnu*.
673 1999-11-11 Erik Naggum <erik@naggum.no>
675 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
677 1999-08-04 Eli Zaretskii <eliz@gnu.org>
679 * config.bat: Make --no-debug work again by removing -gcoff.
681 1999-07-12 Richard Stallman <rms@gnu.org>
683 * Version 20.4 released.
685 1999-06-23 Karl Heuer <kwzh@gnu.org>
687 * make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state.
688 Quote $EMACS, in case it's a program with args.
690 1999-05-29 Richard M. Stallman <rms@gnu.org>
692 * configure.in: Delete the Kerberos stuff.
694 1999-05-27 Greg Hudson <ghudson@mit.edu>
696 * configure.in: Prefer kerberos 5 names.
698 1999-04-26 Richard M. Stallman <rms@gnu.org>
700 * configure.in: Check for libXp.
702 1999-04-08 Richard Stallman <rms@gnu.org>
704 * make-dist: Include change logs in subdirs of `lisp'.
706 1999-04-05 Richard Stallman <rms@gnu.org>
708 * Makefile.in (mkdir): If we create ${datadir}, make it world-readable.
709 (install-arch-indep): Make ${datadir}/emacs world-readable.
711 1999-03-30 Eli Zaretskii <eliz@gnu.org>
713 * config.bat: Use epaths.* instead of paths.*.
715 1999-03-07 Eli Zaretskii <eliz@gnu.org>
717 * INSTALL: Add detailed instructions to unpack and install
720 1999-02-26 Richard Stallman <rms@gnu.org>
722 * configure.in: Use epaths.h and epaths-force instead of paths....
724 * Makefile.in (epaths-force): Renamed from paths-force;
725 operate on epaths.in and produce epaths.h.
727 1999-02-24 Richard Stallman <rms@gnu.org>
729 * make-dist: Fix nt/icons directory handling.
731 1999-02-22 Simon Josefsson <jas@pdc.kth.se>
733 * configure.in (f301-fujitsu-uxpv4.1): New target.
735 1999-02-20 Richard Stallman <rms@gnu.org>
737 * make-dist (tempparent): Fix command to update info files.
739 1999-02-09 Richard Stallman <rms@gnu.org>
741 * configure.in (powerpc-apple-netbsd*): New alternative.
743 1999-01-25 Geoff Voelker <voelker@cs.washington.edu>
745 * make-dist: Include the new directory nt/icons in distributions.
747 1999-01-19 Richard Stallman <rms@psilocin.ai.mit.edu>
749 * configure.in: Change message about HAVE_XFREE386.
751 1999-01-07 Eli Zaretskii <eliz@gnu.org>
753 * config.bat: Support configuring with leim.
755 1998-12-16 Petri Kaurinkoski <Petri.Kaurinkoski@hut.fi>
757 * configure.in (mips-sgi-irix6.5): New target.
759 1998-12-16 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
761 * configure.in: Remove GSS-API support, since it has been removed
764 1998-12-04 Markus Rost <rost@delysid.gnu.org>
766 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
768 1998-12-04 Andreas Schwab <schwab@delysid.gnu.org>
770 * Makefile.in: Don't install customize info file. Run
771 install-info on viper info file.
773 1998-11-29 Richard Stallman <rms@psilocin.ai.mit.edu>
775 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
777 1998-11-16 Kenichi Handa <handa@etl.go.jp>
779 * configure.in (*-*-bsdi4*): New target.
781 1998-11-13 Ehud Karni <ehud@unix.simonwiesel.co.il>
783 * configure.in: Fix previous change.
785 1998-11-11 Richard Stallman <rms@gnu.org>
787 * configure.in (aviion-intel): New machine.
789 1998-11-04 Kenichi Handa <handa@etl.go.jp>
791 * configure.in (mips-nec-sysv4*): New target.
793 1998-11-03 Andreas Schwab <schwab@delysid.gnu.org>
795 * Makefile.in (install-arch-dep): Fix last change and use fns-*.el
798 1998-10-31 Richard Stallman <rms@psilocin.ai.mit.edu>
800 * make-dist: Don't include fns*.el in dist.
802 1998-10-30 Dave Love <fx@gnu.org>
804 * configure.in: Don't mkdir cpp.
806 1998-10-30 Andreas Schwab <schwab@delysid.gnu.org>
808 * Makefile.in (install-arch-dep): Install src/fns-*.el in
811 1998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu>
813 * Version 20.3 released.
815 1998-07-30 Paul Eggert <eggert@twinsun.com>
817 * Makefile.in (Makefile, src/Makefile, src/config.stamp)
818 (lib-src/Makefile, man/Makefile, oldXMenu/Makefile)
819 (lwlib/Makefile, leim/Makefile):
820 Prepend $(srcdir)/ to rule dependencies outside this dir.
822 1998-06-30 Richard Stallman <rms@psilocin.ai.mit.edu>
824 * configure.in: Use unset CDPATH instead of making it empty.
826 1998-06-20 Karl Heuer <kwzh@gnu.org>
828 * configure.in: Assume unspecified Solaris is 2.5, not 2.4.
830 1998-06-07 Richard Stallman <rms@psilocin.ai.mit.edu>
832 * make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el
833 and default.el. Sort the results.
835 1998-05-31 Karl Heuer <kwzh@gnu.org>
837 * Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't
840 1998-05-14 Richard Stallman <rms@psilocin.ai.mit.edu>
842 * Makefile.in (install-arch-indep):
843 Don't alter site-lisp/subdirs.el if it exists.
845 1998-05-12 Richard Stallman <rms@psilocin.ai.mit.edu>
847 * Makefile.in (install-arch-indep): Put `-' on commands to create
848 subdirs.el in site-lisp dirs.
850 1998-05-07 Richard Stallman <rms@psilocin.gnu.org>
852 * Makefile.in (install-arch-indep): Fix typo in previous change.
854 1998-05-06 Richard Stallman <rms@psilocin.gnu.org>
856 * Makefile.in (install-arch-indep): Pass --dir-file to install-info.
858 1998-04-28 Richard Stallman <rms@psilocin.gnu.org>
860 * Makefile.in (mkdir): Create the site-lisp dirs.
861 (install-arch-indep): Make site-lisp/subdirs files world-readable.
863 1998-04-26 Richard Stallman <rms@psilocin.gnu.org>
865 * Makefile.in (INSTALL_INFO): New variable.
866 (install-arch-indep): Don't replace the dir file if it already exists.
867 Use the install-info program, via INSTALL_INFO, to add entries.
868 Make the `info' subdir and the Info files world-readable.
870 1998-04-16 Eli Zaretskii <eliz@delysid.gnu.org>
872 * config.bat: Make sure the environment is large enough to support
873 all the "set foo=bar" commands. Update pointers to DJGPP FTP
876 1998-04-10 Karl Heuer <kwzh@gnu.org>
878 * make-dist: Don't accept EMACS=t when testing for $EMACS set.
880 1998-04-06 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
882 * configure.in: Add --with-gssapi to specify GSS-API
883 authentication support for movemail.
885 1998-04-02 Richard Stallman <rms@psilocin.ai.mit.edu>
887 * Makefile.in (install-arch-indep): Fix previous change.
889 1998-03-30 Richard Stallman <rms@psilocin.ai.mit.edu>
891 * Makefile.in (info): Run man in build dir, not srcdir.
893 1998-03-28 Richard Stallman <rms@psilocin.ai.mit.edu>
895 * Makefile.in (install-arch-indep): Fix previous change.
897 1998-03-23 Kenichi Handa <handa@etl.go.jp>
899 * Makefile.in (top_distclean): Check the existence of `lock'
902 1998-03-22 Richard Stallman <rms@gnu.org>
904 * Makefile.in (install-arch-indep): Put special subdirs.el files
905 in site-lisp dirs. Use normal-top-level-add-subdirs-to-load-path.
907 1998-03-21 Richard Stallman <rms@psilocin.gnu.org>
909 * make-dist: Fix shell syntax in check for missing .el or .elc files.
911 1998-03-09 Richard Stallman <rms@psilocin.gnu.org>
913 * configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10.
914 (m68*-hp-hpux*): Handle versions 1X like 10.
916 1998-03-07 Richard Stallman <rms@psilocin.gnu.org>
918 * make-dist: PROBLEMS is now in etc, not top level dir.
920 * Makefile.in (SOURCES): Delete PROBLEMS.
922 1998-02-25 Richard Stallman <rms@gnu.org>
924 * configure.in (hppa*-hp-hpux*): Use hpux10 by default.
926 * Makefile.in (install-arch-indep): Do chmod a+x on subdirs.
928 1998-01-17 Richard Stallman <rms@gnu.org>
930 * Makefile.in (install-arch-indep): Add semicolon before `else'.
932 1998-01-02 Richard Stallman <rms@psilocin.gnu.org>
934 * make-dist (tempparent): New option --no-check.
936 * make-dist: Don't do anything with cpp directory.
938 1997-12-20 Richard Stallman <rms@psilocin.gnu.org>
940 * configure.in (sparc-fujitsu-sysv4*): New target.
942 1997-12-17 Andreas Schwab <schwab@gnu.org>
944 * configure.in: Cache more tests. Add missing quotes around
945 message with embedded comma.
947 1997-12-04 Karl Heuer <kwzh@gnu.org>
949 * Makefile.in (unlock, relock): Don't reference cpp/ directory.
951 1997-11-26 Joel N. Weber II <devnull@gnu.org>
953 * make-dist: Changed the comment about `umask 0' to say `Don't
954 restrict access to any files.'; previously it said `Don't protect
955 any files', which may have implied that we think fascism is good.
957 1997-11-24 Paul Eggert <eggert@twinsun.com>
959 * configure.in (AC_CHECK_FUNCS): Add strftime. The new GNU C library
960 strftime needs the underlying host's strftime for locale dependent
963 1997-11-20 Abraham Nahum <miko@uxsrvc.tti.co.il>
965 * configure.in (i586-dg-dguxR4.*): New name in case branch.
967 1997-11-20 Eli Zaretskii <eliz@is.elta.co.il>
969 * config.bat: Configure the man subdirectory.
971 1997-11-07 Paul Eggert <eggert@twinsun.com>
973 * configure.in (AC_CHECK_LIB): Add -lintl.
975 1997-11-07 Karl Heuer <kwzh@gnu.org>
977 * make-dist (check for .elc files): Avoid bash-specific syntax.
978 (check for overflow 14-char limit): Simplify.
980 1997-11-07 Richard Stallman <rms@gnu.org>
982 * Makefile.in (install): Move blessmail last.
984 1997-10-02 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
986 * configure.in (gettimeofday, one arg or two):
987 Clarify messages by avoiding double negative.
989 1997-09-30 Karl Eichwalder <ke@suse.de>
991 * Makefile.in (install-arch-indep): install the widget info file.
993 1997-09-24 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
995 * configure.in (with-pop, with-kerberos): Need to check Kerberos
996 libraries in reverse order, so that libraries will appear in the
997 correct dependency order on the link line (and so that the
998 configure checks themselves will work properly when early
999 libraries depend on later ones).
1001 1997-09-21 Erik Naggum <erik@naggum.no>
1003 * make-dist (making links to `src'): Keep timestamp on copied
1006 * make-delta: New script to produce delta distributions.
1008 1997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1010 * Version 20.2 released.
1012 1997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1014 * Version 20.1 released.
1016 * Makefile.in (install-leim): Depend on mkdir.
1017 (leim): Depend on src.
1019 1997-09-13 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1021 * configure.in: Recognize alpha* instead of just alpha.
1023 1997-09-12 Paul Eggert <eggert@twinsun.com>
1025 * leim-Makefile.in (mostlyclean, maintainer-clean): New targets.
1027 1997-09-12 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1029 * update-subdirs: Use rm -f.
1031 1997-09-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1033 * update-subdirs: Delete subdirs.el if this dir has no subdirs.
1034 Ignore subdirs named Old.
1036 1997-08-04 Kenneth Stailey <kstailey@elbereth.disclosure.com>
1038 * configure.in: Add OpenBSD clause to set $machine.
1040 1997-09-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1042 * make-dist: Recompile everything after updating various Lisp files.
1043 Recompile in leim as well as lisp.
1044 Check in leim as well as lisp for mismatched files and too-long names.
1046 1997-09-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1048 * Makefile.in (TAGS tags): Simply refer this to the src subdir.
1050 1997-08-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1052 * Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it
1053 before trying to copy anything from it.
1055 1997-08-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1057 * Makefile.in (man/Makefile): New target.
1058 (tags): Define env var EMACS and run Makefile from build dir.
1060 1997-08-27 Eli Zaretskii <eliz@psilocin.gnu.ai.mit.edu>
1062 * config.bat: If src/_gdbinit doesn't exist, try using
1063 src/.gdbinit to create it (for building on Windows 95).
1065 1997-08-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1067 * Makefile.in (install-arch-indep):
1068 Discard extra data in tar | tar pipes.
1070 1997-08-24 NIIBE Yutaka <gniibe@mri.co.jp>
1072 * configure.in (x_default_search_path): Corrected
1073 '${x_library}' to '${x_library}/X11'.
1075 1997-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1077 * configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1,
1079 1997-08-22 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1081 * configure.in: Support auto-configuration of both Kerberos V4 and
1082 Kerberos V5 for movemail, including detection of V4 and V5 header
1083 files and libraries.
1085 1997-08-16 NIIBE Yutaka <gniibe@etl.go.jp>
1087 * configure.in: Compute x_default_search_path
1088 and substitute into makefiles.
1090 * Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h.
1092 1997-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1094 * Makefile.in (install-arch-indep): Run list-load-path-shadows.
1096 1997-08-07 Erik Naggum <erik@naggum.no>
1098 * configure.in: Remove lockdir, it is no longer needed.
1099 * Makefile.in (mkdir): Don't create lockdir.
1100 (lockdir): Variable deleted.
1101 (paths-force): Don't operate on PATH_LOCK.
1103 1997-08-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1105 * leim-Makefile.in (clean, distclean): New targets.
1107 * make-dist: Include leim/ChangeLog in leim distribution.
1109 1997-08-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1111 * configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP.
1113 1997-07-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1115 * Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS.
1117 1997-07-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1119 * Makefile.in (LDFLAGS): Get this from configure, like CFLAGS.
1121 1997-07-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1123 * make-dist: Update leim/leim-list.el.
1124 Pass along value of $EMACS when updating lisp dir.
1126 1997-07-25 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1128 * configure.in (doug_lea_malloc): Make __after_morecore_hook a
1129 prerequisite to the use of Doug Lea's malloc.
1131 1997-07-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1133 * Makefile.in (top_distclean): Use -f to delete contents of lock dir.
1135 * make-dist: Use name leim/SKK-DIC, not leim/SKK.
1137 1997-07-16 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1139 * make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim.
1141 1997-07-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1143 * configure.in (mips-sony-newsos6*): File news-risc.h renamed
1146 1997-07-10 Eli Zaretskii <eliz@is.elta.co.il>
1148 * config.bat: Use `sed' instead of `cp', which might not be
1151 1997-07-09 Kenichi Handa <handa@etl.go.jp>
1153 * Makefile.in (mostlyclean): Add cleaning leim directory.
1154 (clean, distclean, maintainer-clean): Likewise.
1156 1997-07-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1158 * make-dist (bogosities): Check subdirs of `lisp' also.
1160 1997-07-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1162 * make-dist (etc): Really avoid symlinks now.
1163 (lisp): Don't delete from subdirs the things we never copy.
1165 1997-07-07 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1167 * Makefile.in (install-arch-indep): Correct the target name.
1168 The first letter `i' was dropped by the previous change of mine.
1170 1997-07-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1172 * configure.in (leim/Makefile): Generate this.
1173 (*-sysv4.2uw*): Recognize new alternative.
1175 * leim-Makefile.in: Renamed from leim-Makefile.
1177 * make-dist: Set up real-leim subdirectory,
1178 with the real contents of leim; then move it to
1179 a separate top-level directory.
1181 * make-dist: Don't mention site-lisp, site-init, site-start
1182 or default, when listing files hat are not compiled and should be.
1184 * configure.in: Create src/config.stamp at the end.
1186 1997-07-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1188 * Makefile.in (install-leim): Correct previous change.
1190 1997-07-02 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1192 * Makefile.in (install-leim): New target.
1193 (install): Depend on install-leim.
1195 1997-07-01 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1197 * Makefile.in (SUBDIR): Add leim.
1198 (SUBDIR_MAKEFILES): Add leim/Makefile.
1199 (leim/Makefile): New target.
1201 1997-07-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1203 * leim-Makefile: New file.
1204 * make-dist: Initialize a `leim' subdirectory with that makefile.
1206 1997-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1208 * configure.in (GNU_MALLOC_reason): Fix message text.
1210 1997-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1212 * make-dist (lisp): Don't process subdirs that start with =.
1213 (etc): Copy symlinks, as in src.
1215 1997-06-26 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1217 * configure.in (i*86-*-unixware*): New alternative.
1219 1997-06-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1221 * Makefile.in (src/config.stamp): Target renamed from src/config.h
1222 and touch it explicitly.
1224 * configure.in (mips-sony-newsos6*): New alternative.
1225 (mips-*-linux-gnu*): New alternative.
1226 (*-*-bsdi*): New alternative.
1227 (i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives.
1229 1997-06-22 Dave Love <d.love@dl.ac.uk>
1231 * Makefile.in (lib-src): Depend on src/config.h (e.g. for
1233 (src/config.h): New target to re-configure if src/config.in
1236 1997-06-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1238 * configure.in (shutdown): Check for `shutdown' function.
1240 1997-06-18 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1242 * update-subdirs: Include the directory "language" in subdirs.
1244 1997-06-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1246 * configure.in (m88k-dg-dgux4*): New alternative.
1247 (alpha-*-netbsd*): New alternative.
1248 (powerpcle-*-solaris2*): New alternative.
1250 1997-05-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1252 * make-dist: Warn about .el files that are not compiled.
1254 1997-05-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1256 * Makefile.in (dist): Don't run update-subdirs here,
1257 since make-dist now gets that done.
1259 * make-dist: Use the new `updates' target in lisp/Makefile.
1261 * make-dist: Use new non-file targets in lisp/Makefile.
1263 1997-04-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1265 * make-dist: Handle all subdirs of `lisp' uniformly.
1266 Don't handle `term' and `language' specially.
1267 Clear out umask at the beginning.
1269 1997-04-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1271 * make-dist: Use Make to update finder-inf.el and autoloads.
1272 Also update cus-load.el.
1274 1997-04-09 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1276 * configure.in (doug_lea_malloc): First check for SYSTEM_MALLOC,
1277 in case it is desirable to disable the GNU malloc features with
1280 1997-04-08 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1282 * configure.in (DOUG_LEA_MALLOC):
1283 Define if malloc_{get,set}_state exist.
1285 1997-03-05 Ken'ichi Handa <handa@etl.go.jp>
1287 * make-dist: Make links for files under lisp/language.
1289 1997-02-20 Kenichi Handa <handa@etl.go.jp>
1291 * update-subdirs: Exclude the directory "language" from subdirs.
1293 1997-01-26 Karl Heuer <kwzh@gnu.ai.mit.edu>
1295 * configure.in: Check for rint and cbrt.
1297 1997-01-01 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1299 * make-dist: Use $EMACS to say where to run Emacs.
1300 Add --no-update option.
1302 1996-12-30 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1304 * configure.in (hppa1.1-hitachi-hiuxmpp): New configuration.
1306 1996-12-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1308 * make-dist (copying src): Check thoroughly for symlinks
1309 and copy them in all cases. Regularize the linking of *.in
1310 and *.opt and ChangeLog files.
1311 (copying lib-src): Likewise.
1312 Don't rm getdate.c or y.tab.*--they don't exist any more.
1314 1996-12-18 Jonathan I. Kamens <jik@annex-1-slip-jik.cam.ov.com>
1316 * configure.in: Check for libmail, maillock.h and
1317 touchlock (for movemail).
1319 1996-12-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1321 * configure.in (limits.h): Check for this file.
1323 1996-12-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1325 * configure.in (rs6000-ibm-aix4.2): New alternative.
1326 (rs6000-ibm-aix4.0): New alternative.
1327 (rs6000-ibm-aix4*): Assume aix 4.1 by default.
1329 1996-11-22 Ben Harris <bjh21@cam.ac.uk>
1331 * configure.in: Recognize vax-*-netbsd*.
1333 1996-11-06 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1335 * configure.in (locallisppath): Add leim directory.
1337 1996-10-31 Eli Zaretskii <eliz@is.elta.co.il>
1339 * config.bat: Make sure `mv' supports forward slashes and -f.
1341 1996-10-28 Christian Limpach <chris@nice.ch>
1343 * configure.in (hppa*-next-nextstep*): * added after hppa
1344 to accept hppa1.0 and hppa1.1.
1346 1996-10-05 Marcus G. Daniels <marcus@coulee.tdb.com>
1348 * configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX.
1349 * configure.in (ld_switch_machine): Fix typo.
1351 1996-09-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1353 * configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE
1354 from config.h and use them in $ac_link.
1356 1996-09-28 Erik Naggum <erik@psilocin.gnu.ai.mit.edu>
1358 * configure.in: Create a subdir named `lisp'.
1360 1996-09-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1362 * configure.in: Check for getcwd.
1364 1996-09-04 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1366 * configure.in: Check for termios.h. Check for setpgid.
1368 1996-08-31 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1370 * configure.in: Check for setrlimit.
1372 1996-08-31 Paul Eggert <eggert@twinsun.com>
1374 * configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo.
1376 1996-08-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1378 * configure.in: Check for utimes.
1380 * configure.in: Check for com_err library, but only
1381 if --with-kerberos was used. Check for krb and des
1382 only if --with-kerberos.
1384 1996-08-26 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1386 * Makefile.in (INSTALL_STRIP): New variable.
1387 (install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM.
1388 (install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src.
1390 1996-08-25 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1392 * configure.in: Check for krb and des libraries.
1394 1996-08-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1396 * configure.in (*-sunos4.1.[3-9]*noshare):
1397 Use sunos413, not sunos4-1-3.
1398 (m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3.
1399 (arm-acorn-riscix1.2*): Use riscix12, not riscix1-2.
1401 1996-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1403 * Makefile.in (src/paths.h): Target deleted.
1404 (paths-force): Delete all dependencies on this target
1405 but don't delete the target.
1406 (install): Depend on `all'.
1407 (paths-force): Don't print a message.
1409 * configure.in: Generate src/paths.h here.
1411 1996-08-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1413 * configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS):
1414 New variables that affect linking only.
1415 (alpha-dec-osf*): Use those instead of previous change.
1417 1996-08-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1419 * Makefile.in (install-arch-indep): Install info/messages.
1421 1996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1423 * Version 19.33 released.
1425 1996-08-10 Marcus Daniels <marcus@sayre.sysc.pdx.edu>
1427 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1428 Fix previous change.
1430 1996-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1432 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1435 1996-08-07 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1437 * configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS
1438 and NON_GCC_TEST_OPTIONS.
1440 1996-08-06 Paul Eggert <eggert@twinsun.com>
1442 * configure.in (LOCALTIME_CACHE): Don't put a string literal
1443 "TZ=..." in environ.
1445 1996-08-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1447 * make-dist (msdos): Add is_exec.c, sigaction.c to distribution.
1449 1996-08-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1451 * configure.in (*-sunos4.1.[3-9]*noshare): Move this before
1452 the more general *-sunos4.1.[3-9]* clause.
1454 1996-07-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1456 * Version 19.32 released.
1458 * configure.in (*-sco3.2v5*):
1459 Set OVERRIDE_CPPFLAG to a string of one space.
1460 Fix the code that uses OVERRIDE_CPPFLAG.
1462 1996-07-16 Karl Heuer <kwzh@gnu.ai.mit.edu>
1464 * configure.in: Undo previous change.
1466 1996-07-16 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1468 * config.sub: Use `pc', not `unknown', when canonicalizing
1469 the vendor for ...86.
1471 1996-07-15 David Mosberger-Tang <davidm@AZStarNet.com>
1473 * configure.in: Check for termios.h header.
1475 1996-07-11 Bill Mann <dvmann@dvncr.praxisint.com>
1477 * configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3
1479 1996-07-07 Karl Heuer <kwzh@gnu.ai.mit.edu>
1481 * configure.in: Split bsdos2 and bsdos2-1.
1483 1996-07-06 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1485 * config.sub: If last two words are not a recognized
1486 KERNEL-OS pair, use just the last word as OS, as in 19.31.
1487 Make conversion of gnu/linux to linux-gnu really work.
1489 * config.sub: If vendor unspecified with i386, use `pc' not `unknown'.
1491 1996-06-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1493 * configure.in (check for using Lucid widgets by default):
1494 Eliminate indentation that confuses some compilers.
1496 1996-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1498 * config.sub: Convert linux and gnu/linux to linux-gnu.
1500 * make-dist: Don't update getdate.c.
1501 Ignore =... files when checking for too-long Lisp file names.
1503 1996-06-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1505 * configure.in (euidaccess): Check for that, not for eaccess.
1507 1996-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1509 * configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from
1511 (mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS.
1513 1996-06-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1515 * configure.in: Rename lignux to linux-gnu in configuration names.
1516 Use gnu-linux as the opsys value (s/ file name).
1517 Allow i686 just like i386, i486, i586.
1519 1996-06-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1521 * configure.in (i*86-*-sco3.2v5): New alternative.
1522 (OVERRIDE_CPPFLAG): New variable.
1523 (CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that.
1525 * configure.in: Specify vpath for .texi files.
1527 1996-06-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1529 * configure.in: Always check for HAVE_X11R5.
1530 Separately decide whether to use a toolkit by default.
1532 1996-06-04 Bill Mann <dvmann@dvhpux1.praxisint.com>
1534 * configure.in: If X11R5 is missing the Xaw headers,
1535 default to --with-x-toolkit=no.
1537 1996-05-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1539 * configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000.
1541 1996-05-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1543 * Makefile.in (install-arch-indep): If cd etc makes output,
1544 don't treat that as part of the tar data.
1545 Check that ./lisp actually exists.
1547 1996-05-29 Karl Heuer <kwzh@gnu.ai.mit.edu>
1549 * make-dist: Check for long file names.
1551 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1553 * Version 19.31 released.
1555 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1557 * configure.in: Recognize sparc-*-lignux.
1559 1996-05-03 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1561 * make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist.
1562 Don't include config.w95.
1564 1996-04-21 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1566 * make-dist: Replace --no-clean-up and --no-tar options
1567 with --clean-up and --tar, so that the default is useful.
1569 1996-04-15 Eli Zaretskii <eliz@is.elta.co.il>
1571 * config.bat: Make sure the GDB init file is called src/_gdbinit;
1572 if not, tell the user to rename it and abort.
1574 1996-04-14 Eli Zaretskii <eliz@is.elta.co.il>
1576 * config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE
1579 1996-04-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1581 * config.bat (djgpp_ver): Variable renamed from djgpp-ver.
1583 * make-dist (MANIFEST): Fix previous change.
1584 (msdos): Put mainmake.v2 into the dist.
1586 1996-04-10 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1588 * make-dist: Exit if autoconf fails.
1590 1996-04-10 Eli Zaretskii <eliz@is.elta.co.il>
1592 * config.bat: Set djgpp-ver, and unset it at the end.
1593 Add a number ofconditionals for DJGPP version 2.
1594 Rename label libsrc2 to libsrc3.
1595 Substitute for LDFLAGS in src/Makefile.
1596 Substitute for ALL_CFLAGS in lib-src/Makefile.
1598 1996-04-08 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1600 * configure.in (ncurses): Check this after checking fns like strerror.
1602 1996-04-08 Erik Naggum <erik@naggum.no>
1604 * make-dist (MANIFEST): Don't include lines from =files.
1606 1996-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1608 * make-dist: Don't put lisp/dired.todo in the dist.
1610 1996-04-05 Richard Stallman <rms@lucy.gnu.ai.mit.edu>
1612 * configure.in (HAVE_NCURSES): Look for library named ncurses.
1614 * configure.in (setlocale): Check for it.
1616 * configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp.
1618 1996-03-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1620 * configure.in: Use lignux instead of linux as value of opsys.
1622 1996-03-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1624 * Makefile.in (install-strip): Fix whitespace.
1625 Get rid of continuation.
1627 * config.sub: Convert linux or gnu/linux to lignux.
1629 1996-03-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1631 * configure.in: Accept lignux in configuration name.
1633 1996-03-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1635 * Makefile.in (install-strip): New target.
1637 1996-03-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1639 * Makefile.in (top_distclean): Use `|| true' to ignore error in rm.
1640 -f failed to do the job on Suns.
1642 1996-03-13 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1644 * Makefile.in (install-arch-dep): Don't depend on install-arch-indep.
1646 * configure.in (linux/version.h): Check for this header.
1648 1996-03-12 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1650 * configure.in: Remove -fno-builtin hackery from -lm check.
1652 1996-03-08 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1654 * configure.in (-lm check): If $GCC, append -fno-builtin to $CC for
1657 * configure.in (AC_PREREQ): Require version 2.8 of Autoconf.
1659 1996-03-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1661 * configure.in: Check for ncurses.
1663 1996-02-28 Paul Eggert <eggert@twinsun.com>
1665 * configure.in (LOCALTIME_CACHE):
1666 Also define if localtime mishandles unsetting TZ.
1667 This works around a localtime bug in mips-dec-ultrix.
1669 1996-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1671 * make-dist (finder-inf.el): Use finder-compile-keywords-make-dist.
1673 * configure.in: Improve messages about X versions.
1675 1996-02-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1677 * configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null.
1679 1996-02-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1681 * configure.in (HAVE_X11XTR6): Set it as a shell variable.
1682 (HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE.
1684 * Makefile.in (install-arch-dep): Depend on install-arch-indep.
1685 (install): Put install-arch-indep before install-arch-dep.
1687 1996-02-20 Dave Love <d.love@dl.ac.uk>
1689 * INSTALL: Clarify info about MS-DOS path handling.
1691 1996-02-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1693 * Makefile.in (install-arch-indep): Install info/ccmode*.
1694 In previous change, protect against /bin/pwd returning null string.
1696 1996-02-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1698 * Makefile.in (install-arch-indep): Copy build-dir's lisp subdir
1701 1996-02-01 Paul Eggert <eggert@twinsun.com>
1703 * configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar.
1705 1996-01-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1707 * configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails.
1709 1996-01-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1711 * Makefile.in (extraclean): Use ${top_distclean} to ensure
1712 we delete everything distclean deletes.
1714 1996-01-23 Karl Heuer <kwzh@gnu.ai.mit.edu>
1716 * make-dist (lwlib): Don't distribute lwlib-Xol* files.
1718 1996-01-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1720 * configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE
1721 into LDFLAGS instead of into LIBS.
1723 1996-01-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1725 * configure.in (HAVE_XMU): Fix typo in previous change.
1727 1996-01-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1729 * configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc.
1731 1996-01-10 Erik Naggum <erik@naggum.no>
1733 * configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'.
1735 1996-01-10 Karl Heuer <kwzh@gnu.ai.mit.edu>
1737 * Makefile.in (install-arch-indep): Ignore error if no chmod -R.
1739 1996-01-10 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1741 * configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit
1742 and use -lXt to link it.
1744 1996-01-08 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1746 * configure.in (locallisppath): Put version-specific dir first.
1748 1996-01-07 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1750 * configure.in (hppa-*-nextstep*): New alternative.
1751 (USE_X_TOOLKIT): By default, set this to "maybe";
1752 and change that later to LUCID or "no" according to X11 version.
1754 * make-dist: Recompile outdated .elc files and update all autoloads.
1756 1996-01-05 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
1758 * configure.in (locallisppath): Fix typo in last change: " -> '.
1760 1996-01-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1762 * configure.in (locallisppath): Add ../emacs/VERSION/site-lisp.
1764 1995-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1766 * Makefile.in (install-arch-indep): Give all files read permission.
1768 1995-12-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1770 * configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*):
1771 If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5.
1773 1995-12-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1775 * configure.in: Determine HAVE_X11R6.
1776 (HAVE_MENUS): Renamed from HAVE_X_MENU.
1778 1995-12-21 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1780 * configure.in: Just "solaris" now defaults to version 2.4.
1781 Add sunos4.1.n-noshare as alternative.
1783 1995-12-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1785 * configure.in (mips-sgi-irix6*): Set NON_GNU_CPP.
1787 1995-11-29 Erik Naggum <erik@naggum.no>
1789 * Makefile.in (install-arch-indep): Add missing backslash.
1791 1995-11-29 Karl Eichwalder <ke@ke.Central.DE>
1793 * Makefile.in (install-arch-indep): Don't install
1794 lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo.
1796 1995-11-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1798 * Makefile.in (install-arch-indep): Fix previous change.
1800 * configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*.
1802 1995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1804 * Version 19.30 released.
1806 * make-dist (lisp): Exclude subdirs.el.
1808 1995-11-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1810 * make-dist (etc): Delete *.orig and *.rej.
1812 1995-11-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1814 * Makefile.in (install-arch-indep): Rename old info/dir only if exists.
1816 1995-11-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1818 * configure.in (hppa*-hp-hpux10*): Use s/hpux10.h.
1820 1995-11-14 Geoff Voelker <voelker@cs.washington.edu>
1822 * make-dist (nt): Rename install, readme, and todo to
1823 INSTALL, README, and TODO.
1825 1995-11-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1827 * make-dist (lisp): Don't distribute site-start.
1829 1995-11-06 Karl Heuer <kwzh@gnu.ai.mit.edu>
1831 * make-dist: Break the hard link on alloca.c.
1833 1995-11-04 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1835 * configure.in (LIBS): Add libsrc_libs and keep the old LIBS.
1837 1995-11-02 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1839 * make-dist (src, lib-src): Don't distribute Makefile.c.
1840 (etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc.
1842 1995-10-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1844 * Makefile.in (mkdir): Create man1dir, not mandir.
1845 (uninstall): Use man1dir, not mandir.
1847 1995-10-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1849 * Makefile.in (man1dir): New variable.
1850 (install-arch-indep): Use man1dir.
1852 * configure.in (sparc-*-nextstep*): Remove incorrect .h's.
1854 * make-dist: Create lisp/MANIFEST.
1856 1995-10-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1858 * configure.in (m68k-*-linux*): New alternative.
1860 1995-10-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1862 * make-dist: Use new names config.in, paths.in, and
1863 {src,lib-src}/Makefile.in.
1865 1995-10-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1867 * configure.in: Don't bother checking for drem.
1869 1995-10-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1871 * Makefile.in (distclean): Delete line with just a tab in it.
1872 (install-arch-indep): Delete spaces that precede tabs.
1873 Delete spurious `fi' left from previous change.
1874 (install): Supply `true' as command, to avoid null command.
1876 1995-10-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1878 * configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'.
1880 1995-09-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1882 * configure.in (powerpc-*-solaris2): New alternative.x
1884 1995-09-12 Karl Heuer <kwzh@gnu.ai.mit.edu>
1886 * Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead
1887 of paths.h.tmp$$, to avoid going beyond 14 characters.
1889 1995-09-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1891 * configure.in: Improve error msg for invalid --with-x-toolkit value.
1893 1995-09-06 Paul Eggert <eggert@twinsun.com>
1895 * configure.in (LOCALTIME_CACHE): Define if tzset exists and
1896 if localtime caches TZ. Check for tzset.
1898 1995-09-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1900 * config.bat: Simplify using new names file names src/makefile.in,
1901 config.in, paths.in. Change Echo commands not to use `.
1903 1995-08-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1905 * Makefile.in (install-arch-indep): Always install the new dir file;
1906 rename the previous dir file to dir.bak or dir.old.
1908 1995-08-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1910 * configure.in (RANLIB): Substitute this into makefiles.
1911 Set it specially on solaris; set it by default on other systems.
1913 * configure.in: Fix previous Alpha change.
1915 1995-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1917 * configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and
1918 NON_GCC_TEST_OPTIONS.
1920 1995-08-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1922 * configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS
1923 from config.h, use SPECIFIED_CFLAGS to get what the user specified.
1925 * configure.in (alpha-*-linux*): New configuration.
1927 1995-08-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1929 * configure.in (m68*-next-*): Use m68k.h and nextstep.h.
1930 (m68k-next-nextstep*): New alias for that.
1931 (i*86-*-nextstep*): Use nextstep.h.
1932 (sparc-*-nextstep*): New configuration.
1934 1995-08-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1936 * configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS.
1937 And get CFLAGS from config.h if SPECIFIED_CFLAGS is null.
1939 1995-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1941 * configure.in: Handle sunos4shr by sharing; not like sunos4*.
1942 Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment.
1944 1995-07-18 Mike Long <mike.long@analog.com>
1946 * make-dist: Fix update of finder-inf.el, and byte-compile it.
1948 1995-07-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1950 * Makefile.in (src/paths.h, paths-force):
1951 Rename src/paths.h.in to src/paths.in.
1952 (Makefile): Depend on src/Makefile.in, not src/Makefile.in.in.
1954 * configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in.
1955 Use Makefile.c for intermediate file.
1956 Rename src/config.h.in to src/config.in.
1958 1995-07-17 Richard Stallman <rms@gnu.ai.mit.edu>
1960 * configure.in (mips-dec-ultrix*): Assume version 4.3.
1961 (mips-dec-ultrix4.[12]): New alternative for old versions.
1963 1995-07-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1965 * make-dist: Don't break intra-tree links.
1967 1995-07-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
1969 * configure.in: Put back archlibdir initialization. Require
1970 autoconf 2.4.1 or later.
1972 1995-07-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1974 * configure.in: Use sunos4shr normally for Sunos 4.1.[3-9].
1975 (mips-mips-riscos5*): New alternative.
1977 1995-06-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1979 * Makefile.in (uninstall, install-arch-indep): Install info/ediff*.
1981 1995-06-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1983 * configure.in (bindir, datadir, sharedstatedir, libexecdir)
1984 (mandir, infodir, archlibdir): Initializations deleted.
1986 * configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4.
1987 On hpux9shr, use hpux9shxr4.h.
1989 1995-06-24 Morten Welinder <terra+@cs.cmu.edu>
1991 * configure.in: Added target mips-dec-mach_bsd4.3.
1992 * config.guess: Guess mips-dec-mach_bsd4.3.
1994 1995-06-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1996 * Makefile.in (mkdir): Use symbolic chmod.
1998 1995-06-22 Paul Eggert <eggert@twinsun.com>
2000 * configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3.
2001 (Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.)
2003 1995-06-22 Paul Eggert <eggert@twinsun.com>
2005 * Makefile.in (SUBDIR_MAKEFILES):
2006 Add man/Makefile, so `make distclean' removes it.
2007 (top_distclean): Add config.log to the list of files to be removed.
2009 1995-06-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2011 * Version 19.29 released.
2013 1995-06-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2015 * configure.in: Fix the previous change to verify that the -b
2016 option really solves the problem.
2018 * make-dist (nt): Explicitly include makefile.nt and makefile.def only.
2020 1995-06-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2022 * configure.in: Test whether XFree86 needs -b i486-linuxaout to link.
2024 1995-06-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2026 * configure.in: Report more clearly when there is no special
2027 dir to search for X includes or libraries.
2029 1995-06-13 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2031 * configure.in: Check for -lpthreads, not -lpthread.
2033 1995-06-09 Geoff Voelker <voelker@cs.washington.edu>
2035 * make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in.
2037 1995-06-08 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2039 * configure.in: Check for -lpthread.
2041 1995-06-05 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2043 * Makefile.in (install-arch-indep): Install info files for mh-e.
2044 (uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc.
2046 1995-06-01 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2048 * configure.in (*-solaris2.5): New configuration.
2050 * make-dist: Copy new files config.nt and config.w95.
2052 1995-05-30 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2054 * configure.in: Use x_includes, not x_libraries, for -I.
2055 Make bitmapdir a colon-separated list.
2057 1995-05-27 Richard Stallman <rms@gnu.ai.mit.edu>
2059 * configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations.
2061 * configure.in: Allow x_libraries and x_includes to be paths.
2063 1995-05-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2065 * configure.in: Fix typo.
2067 1995-05-24 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2069 * INSTALL: Clarify use of site-init.el.
2071 1995-05-22 enami tsugutomo <enami@sys.ptg.sony.co.jp>
2073 * configure.in: pass arg to sqrt.
2075 1995-05-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2077 * make-dist: Fix May 6 change.
2079 1995-05-17 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2081 * vpath.sed: Delete reference to ymakefile.
2083 1995-05-09 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2085 * configure.in: Use sqrt (more portable) instead of fmod in -lm
2088 1995-05-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2090 * make-dist: Put nt/emacs.ico and nt/emacs.rc in dist.
2092 * update-subdirs: Specify /bin/sh to run the script.
2094 1995-05-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2096 * make-dist: Put src/makefile.nt in dist.
2098 * configure.in (i[345]86-*-bsdi2*): New configuration.
2099 (vax-dec-bsd386*): Deleted.
2101 1995-05-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2103 * configure.in: Make sure CDPATH doesn't mess up PWD check. Check
2104 whether X bitmaps are in X11/bitmaps instead of bitmaps. Use fmod
2105 instead of logb in -lm check.
2107 1995-05-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2109 * configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
2110 Use bsd4-3. Don't set NON_GNU_CPP.
2112 * make-dist: Don't copy in src/s/*.inp. Don't copy nt/src.
2113 In nt. copy various different things, but not *.cmd.
2114 Fix the ln commands for the subdirs of nt.
2116 1995-04-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2118 * configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h.
2120 1995-04-27 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2122 * configure.in (*-sun-sunos4.1.3*): Use shared libraries,
2123 since that's what the header file expects.
2125 1995-04-24 Francesco Potorti` (pot@cnuce.cnr.it)
2127 * configure.in (m68k-motorola-sysv*): Distinguish between 68030
2128 and 68040 based machines when choosing options for gnucc.
2130 1995-04-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2132 * Makefile.in (top_distclean): Delete config.cache.
2134 1995-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2136 * Makefile.in (install-arch-indep): Delete .#* when copying subdirs.
2138 * configure.in: Use m/ncr386.h.
2140 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2142 * Makefile.in (install-arch-indep): Undo Sep 23 change.
2144 1995-04-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2146 * make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore.
2147 (man): Don't copy texindex.c and getopt.c; they're deleted.
2148 (etc): Omit `e'; it's a subdirectory.
2149 (etc/e): Use `../..', not `..', to reference top level.
2151 1995-04-06 Simon Leinen <simon@lia.di.epfl.ch>
2153 * Makefile.in (install-arch-indep, dist):
2154 look for `update-subdir' in $(srcdir).
2156 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2158 * make-dist: Include mkinstalldirs in distribution.
2160 1995-04-05 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2162 * make-dist: Add missing close backquote.
2164 1995-04-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2166 * make-dist: Don't distribute shortnames directory.
2168 1995-03-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2170 * Makefile.in (blessmail): Pass archlibdir to the sub-make.
2172 1995-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2174 * configure.in (m88k-motorola-sysv4*): Use usg5-4-2.
2176 1995-02-23 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2178 * configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args.
2180 1995-02-13 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2182 * configure.in (mips-sgi-irix6): New configuration.
2184 1995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2186 * Makefile.in (maintainer-clean): Renamed from realclean.
2188 1995-02-02 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2190 * configure.in: Create a .gdbinit that sources the real one, if
2191 using a different build directory.
2193 1995-01-23 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2195 * configure.in: Check for sys/select.h.
2197 1995-01-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2199 * configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP.
2201 1994-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2203 * configure.in: Handle isc 4.1 operating system.
2205 1994-12-10 Richard Stallman <rms@kepa>
2207 * configure.in (rs6000-ibm-aix4.1*): New alternative.
2208 (rs6000-ibm-aix4*): New alternative.
2210 1994-12-06 Richard Stallman <rms@kepa>
2212 * configure.in: For SVR4.2, set NON_GNU_CPP if not already set.
2214 1994-11-30 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2216 * configure.in: Don't try to make directories that are guaranteed
2219 1994-11-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2221 * configure.in: Generate man/Makefile from man/Makefile.in.
2222 Create the man subdir.
2224 * Makefile.in (dvi): Run Make in our man subdir.
2226 * make-dist: Create subdir etc/e.
2228 Put man/Makefile.in in dist, instead of man/Makefile.
2230 1994-11-21 David J. MacKenzie (djm@mole.gnu.ai.mit.edu)
2232 * configure.in: Add --with-pop, --with-kerberos, and
2233 --with-hesiod for movemail.
2235 1994-11-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2237 * configure.in (m68*-apollo*): Use s/domain.h.
2239 1994-11-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2241 * configure.in (m68*-apollo*): Set NON_GNU_CPP.
2243 1994-11-14 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2245 * configure.in: Don't add -I, -L, -R options for cc if their
2246 arguments would be empty.
2248 1994-11-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2250 * configure.in (i860-intel-osf1*): New alternative.
2251 (mips-sgi-irix5.[01]*): Distinguish from irix5*.
2252 (mips-sgi-irix*): Now an alias for mips-sgi-irix5*.
2254 1994-11-09 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2256 * configure.in: Make h_errno check not use nested functions.
2258 1994-11-09 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2260 * Makefile.in (install-arch-indep): Delete *.orig in copied dirs.
2262 1994-11-08 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
2264 * Makefile.in (install-arch-indep): Avoid continued comment
2265 swallowing target line.
2267 1994-11-08 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu)
2269 * configure.in: Protect a character class with `changequote'.
2271 1994-11-07 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2273 * configure.in: Accept `news' as a synonym for `newsos'.
2275 1994-11-03 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2277 * Makefile.in: Don't rm files if cd fails.
2279 1994-11-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2281 * make-dist: Put nt subdir and its subdirs in the dist.
2282 (lib-src): Put makefile.nt in the dist.
2283 (lisp): Put makefile.nt in the dist.
2285 1994-10-29 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2287 * configure.in: Change a stray `[' to `test'.
2289 1994-10-28 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2291 * configure.in: Adapt for Autoconf v2. Use the standard argument
2292 parser, host type canonicalizer, X11 finder, and message
2293 printing macros. Use the new macro names. Use `test' instead of `['.
2295 1994-10-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2297 * configure.in: Check for getpagesize.
2299 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2301 * make-dist (msdos): Put sed* in the distribution.
2303 1994-10-17 Morten Welinder <terra@mole.gnu.ai.mit.edu>
2305 * config.bat: New option, `--with-x', for configuring Emacs
2306 for use with the X11 system DesqView/X.
2307 New option, `--no-debug', for compiling Emacs without debug
2308 information thus saving disk space.
2309 (src/config.h, src/paths.h): Use `update' (which is like
2310 `move-if-changed') to change the file.
2311 (src/config.h): When configuring for X11 perform extra changes.
2312 (src/makefile): When configuring for X11 perform extra changes.
2313 (lib-src): Remove temporary files.
2314 (): Check that `sed', `rm', `mv', and `gcc' are available.
2316 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2318 * Makefile.in (sharedstatedir): Substitute sharedstatedir properly.
2320 * configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps.
2322 1994-10-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2324 * configure.in (EMACS_CONFIGURATION): Use $canonical as value.
2326 * configure.in (canonical): Substitute var into makefiles.
2327 (bitmapdir): Likewise.
2329 * Makefile.in (bitmapdir): New variable.
2330 (src/paths.h, paths-force): Edit PATH_BITMAPS.
2332 1994-10-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2334 * make-dist: Put update-subdirs and lisp/subdirs.el in the dist.
2336 * Makefile.in (dist, install-arch-indep): Run update-subdirs.
2337 * update-subdirs: New shell script.
2339 1994-10-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2341 * Makefile.in (top_distclean): Don't rm build-install.
2342 (SOURCES): Delete build-install.in.
2344 * make-dist: Don't distribute build-ins.in.
2345 * build-ins.in: File deleted.
2347 1994-10-12 David J. MacKenzie (djm@duality.gnu.ai.mit.edu)
2349 * Makefile.in (mkdir): Use mkinstalldirs instead of make-path.
2351 1994-10-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2353 * Makefile.in: Use libexecdir and sharedstatedir as appropriate.
2355 * configure.in (libexecdir): Renamed from libdir. New default.
2356 (sharedstatedir): Renamed from statedir. New default.
2357 (datadir): New default.
2359 * make-dist: Don't distribute subdirs.el.
2361 1994-10-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2363 * configure.in (eaccess): Check for it.
2365 1994-10-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2367 * configure.in (mktime): Check for it.
2369 1994-10-02 Paul Reilly <pmr@geech.gnu.ai.mit.edu>
2371 * configure.in (motif): Add support for usage and option checking.
2373 1994-09-24 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2375 * configure.in (utimes): Check for it.
2377 1994-09-23 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2379 * Makefile.in (install-arch-indep): Don't do mkdir here.
2381 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2383 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2384 riscix.h renamed to acorn.h.
2386 1994-09-21 Michael Ben-Gershon (mybg@cs.huji.ac.il)
2388 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2391 1994-09-21 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2393 * configure.in: Remove trailing slashes from srcdir.
2395 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2397 * configure.in (i[345]86-sequent-ptx*): Handle
2399 1994-09-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2401 * Makefile.in (paths-force): Depend on src/paths.h
2403 1994-09-19 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2405 * configure.in (config_options): Save all arguments, not just some.
2407 1994-09-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2409 * Makefile.in (install-arch-indep): Copy DOC-*, not DOC*
2411 * configure.in: Add AC_AIX.
2412 Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT.
2414 1994-09-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2416 * configure.in (parsing options): Simplify sed command to delete -'s.
2418 1994-09-16 Karl Heuer <kwzh@churchy.gnu.ai.mit.edu>
2420 * configure.in (config_options): New shell variable.
2421 Pass its value to C code in EMACS_CONFIG_OPTIONS.
2423 1994-09-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2425 * configure.in (alpha-dec-osf*): New target.
2427 * Makefile.in: Use just one FRC target.
2429 1994-09-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2431 * Makefile.in (removenullpaths, paths-force):
2432 Use name paths.h.tmp$$, which depends on the pid.
2434 1994-09-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2436 * Makefile.in (removenullpaths, paths-force):
2437 Put paths.h.tmp in top-level dir, not in src.
2439 1994-09-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2441 * Version 19.27 released.
2443 1994-09-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2445 * Version 19.26 released.
2447 1994-09-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2449 * configure.in: Check for lrand48, not rand48.
2451 1994-09-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2453 * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5)
2454 (powerpc-ibm-aix*): New aliases.
2456 1994-08-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2458 * make-dist (src/m, src/s): Put *.inp in distribution.
2460 1994-08-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2462 * configure.in: Accept i586 and i486 along with i386.
2464 1994-08-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2466 * configure.in: Do compute unexec, LIBX, system_malloc, etc
2467 even if CPP env var was set by the user.
2469 * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value.
2471 1994-08-14 Jonathan I. Kamens (jik@gza-client1.aktis.com)
2473 * Makefile.in: Uninstall "$(EMACS)", not "emacs".
2475 1994-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2477 * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP.
2479 1994-08-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2481 * configure.in: Check more specifically for i*86-sun-sunos.
2483 1994-08-03 Caveh Jalali (caveh@eng.sun.com)
2485 * configure.in: Handle solaris 2.4.
2487 1994-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2489 * configure.in (rand48): Check for it.
2491 1994-07-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2493 * make-dist: Update the info files.
2495 1994-07-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2497 * configure.in: Make "checking..." messages' style consistent.
2498 (HAVE_H_ERRNO): New test.
2500 1994-07-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2502 * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP.
2504 1994-07-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2506 * configure.in (CFLAGS): If the envvar was specified, use that.
2507 And set REAL_CFLAGS from it too.
2509 1994-07-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2511 * make-dist: Update finder-inf.el.
2513 1994-07-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2515 * make-dist (msdos): Include sed4.inp in dist.
2517 * Makefile.in (libsrc_libs): Var deleted.
2519 1994-07-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2521 * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands.
2523 1994-06-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2525 * configure.in (mips-sony-newsos4*): New alias.
2527 1994-06-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2529 * configure.in (*-convex-bsd*): Set NON_GNU_CPP.
2530 (*-convex-convexos*): Accept this as alias.
2532 1994-06-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2534 * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE,
2535 for two different uses.
2537 1994-06-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2539 * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc.
2541 1994-06-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2543 * make-dist: Put ./BUGS into the distrib.
2545 1994-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2547 * configure.in: Handle 386 running Solaris 2.
2549 1994-06-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2551 * configure.in (mips-siemens-sysv*): Use cpp, not cc -E.
2553 1994-06-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2555 * configure.in (mips-sony-newsos*): Use news-risc.h.
2557 * configure.in: Accept bsdi as opsys, like bsd386.
2559 1994-06-01 Morten Welinder (terra@diku.dk)
2561 * config.bat (src/paths.h): Use sed script msdos/sed4.inp.
2563 1994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2565 * Version 19.25 released.
2567 * make-dist (shortversion): Don't assume another period follows.
2569 1994-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2571 * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd.
2572 (uninstall): Use /bin/pwd.
2574 * Makefile.in (blessmail): Depend on src.
2575 (all): Don't depend on blessmail.
2577 * Makefile.in (src/paths.h): Don't force recomputation.
2578 (paths-force): New target; force recomputation of paths.h.
2579 (all): Depend on paths-force.
2580 (src, lib-src): Depend on src/paths.h.
2582 * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS,
2583 NON_GCC_TEST_OPTIONS.
2585 1994-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2587 * configure.in: Don't insist on subversions for irix.
2589 1994-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2591 * configure.in (hppa*-hp-hpux9shr): Move alternative up.
2593 * configure.in (i[34]86-next-*): New alternative.
2595 1994-05-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2597 * Version 19.24 released.
2599 * configure.in: New config hppa*-hp-hpux9shr*.
2601 1994-05-22 Morten Welinder (terra@tyr.diku.dk)
2603 * config.bat: Doc fix.
2605 1994-05-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2607 * Makefile.in (mostlyclean, clean, distclean, realclean)
2608 (extraclean): Don't act on man subdir if it doesn't exist.
2610 1994-05-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2612 * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars.
2613 Use them to set up CC.
2614 (*-sun-sunos4.1.3): Set them.
2616 1994-05-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2618 * Makefile.in (lib-src): Don't depend on src/paths.h.
2620 1994-05-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2622 * build-ins.in (copydests): Get rid of spurious `-'s.
2624 * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION.
2626 1994-05-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2628 * Version 19.23 released.
2630 * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS
2631 for the Xlib and Xt checks; then restore old CFLAGS.
2633 1994-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2635 * configure.in (HAVE_X11XTR6): Add newline before #if.
2636 Add newline after #endif.
2638 1994-05-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2640 * configure.in (HAVE_X11XTR6): Arrange to define it.
2642 1994-05-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2644 * Makefile.in (install): Depend on blessmail.
2646 1994-05-12 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2648 * configure.in (mips-siemens-sysv*): Put quotes around value
2651 1994-05-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2653 * Makefile.in (TAGS): Use the makefile in src subdir.
2655 1994-05-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2657 * configure.in (opsys): Recognize `gnu'.
2659 1994-05-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2661 * configure.in (using NON_GNU_CPP): Fix test for CPP already set.
2663 1994-05-09 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2665 * configure.in: Remove AC_LANG_C call. Not needed with Autoconf
2668 1994-05-08 Morten Welinder (terra@diku.dk)
2670 * config.bat: Forcibly remove "# " style comments from makefiles.
2672 1994-05-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2674 * Makefile.in (uninstall): When processing lispdir and etcdir,
2675 do nothing unless it exists and is a directory.
2677 1994-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2679 * Makefile.in (install-arch-indep): Do install info/dired-x*.
2680 Merge code in from install-doc.
2681 (install-doc): Merge code back into install-arch-indep.
2682 (install-arch-dep): Don't depend on install-doc.
2684 * configure.in (run_in_place): Don't use pwd for archlibdir and docdir.
2686 1994-05-04 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2688 * configure.in (making src/Makefile and lib-src/Makefile):
2689 Split off the autoconf substitutions and don't pass them thru cpp.
2690 (undefs): Use $canonical as well as $configuration.
2692 * make-dist: Distribute lisp/Makefile.
2694 * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*.
2695 Use lower case names for the s files.
2697 1994-05-03 Morten Welinder (terra@diku.dk)
2699 * config.bat: Added possibility for different file name
2700 transscriptions in lib-src.
2702 1994-05-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2704 * Makefile.in (lib-src): Undo previous change.
2705 (blessmail): New target to run maybe-blessmail in lib-src.
2706 (all): Depend on blessmail.
2708 * Makefile.in (lib-src): Depend on src.
2710 1994-04-30 Paul Reilly (pmr@churchy.gnu.ai.mit.edu)
2712 * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3.
2713 (m88k-dg-dgux5.4R2): dgux5.4R2.
2715 1994-04-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2717 * configure.in (window_system): Restore accidentally deleted code
2718 that uses AC_FIND_X.
2720 * make-dist: Distribute config.bat.
2722 1994-04-29 Morten Welinder (terra@diku.dk)
2724 * config.bat: Corrected the configuration of lib-src
2725 to keep up with configure. Add note about dos version 3
2726 or better needed (djgpp needs that). Add note explaining
2727 that either install in c:/emacs or edit the script.
2728 Don't change to c:/emacs, but assume we're there (to minimize
2729 the number of places to change).
2731 * config.bat: Build-in the first step towards X11 support with
2732 the X11 emulator that exists. At this time it won't work,
2733 and several files are missing.
2735 1994-04-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2737 * configure.in: Use m/hp800.h in place of m/hp9000s800.h.
2738 Don't look for -lresolv.
2740 * Makefile.in (lib-src): Depend on src/paths.h.
2742 1994-04-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2744 * configure.in: Restore deleted AC_SUBST of `configuration'.
2745 Improve error message for bad --with-x-toolkit value.
2747 * configure.in: Define CONFIGURATION in src/config.h
2748 rather than substituting in src/Makefile.in.
2750 1994-04-26 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2752 * Makefile.in (install-doc): New target.
2753 (install-arch-dep): Depend on install-doc.
2754 (mkdir): Create docdir.
2756 1994-04-22 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2758 * configure.in: Test for libresolv.a.
2759 Substitute machfile and opsysfile.
2761 1994-04-22 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2763 * Makefile.in (.PHONY, install): Kill reference to obsolete do-install.
2764 (install-arch-dep): Install under the name $(EMACS).
2766 1994-04-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2768 * configure.in (version): Use entire value of emacs-version.
2769 (mips-siemens-sysv*): New alternative.
2771 1994-04-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2773 * Makefile.in (install-arch-indep): Don't install dired-x*.
2775 1994-04-18 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2777 * configure.in (src/Makefile, lib-src/Makefile): Delete ^L.
2778 Fix definition of $undefs.
2780 1994-04-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2782 * configure.in (window_system): Obey --with-x11=no and --with-x10=no.
2784 * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I.
2786 1994-04-16 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2788 * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE.
2790 1994-04-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2792 * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in
2793 and run it thru cpp, as with src/Makefile.in.
2795 * configure.in: Use AC_SET_MAKE.
2797 1994-04-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2799 * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2.
2801 1994-04-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2803 * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@.
2805 * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes.
2806 (printing the choices): Make the toolkit message unconditional.
2807 (USE_X_TOOLKIT): Use `none', not `no', if none.
2808 (include libsrc_libs): Include config.h, and specify -I for srcdir.
2809 Get rid of temp file foofoo1.
2811 1994-04-13 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2813 * configure.in (CFLAGS): Use shell syntax, not Makefile.
2815 1994-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2817 * configure.in (window_system): If no X, set USE_X_TOOLKIT=no.
2818 (printing the choices): State choice of toolkit.
2819 (libsrc_libs): Recalculate after writing config.h;
2820 then update lib-src/Makefile.
2822 1994-04-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2824 * configure.in: Add sunos4shr as alternative for suns.
2825 Conditionals testing for null $CC were backwards.
2827 1994-04-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2829 * make-dist (msdos): Don't link patch1. Link sed*.inp, not sed.in*.
2831 1994-04-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2833 * configure.in: Handle -isc4.0*.
2835 1994-03-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2837 * configure.in (esix5): Set NON_GNU_CPP.
2839 1994-03-24 Roland McGrath (roland@mole.gnu.ai.mit.edu)
2841 * Makefile.in (thisdir): Nonsensical variable removed.
2842 (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd
2843 back to $thisdir, rather than the directory `this_dir'.
2845 1994-03-17 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2847 * Makefile.in (install-arch-indep): Add missing backslash after a
2850 1994-03-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2852 * Makefile.in (thisdir): New variable.
2853 (install-arch-indep): Go back to thisdir to run INSTALL_DATA.
2855 1994-03-08 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2857 * configure.in: Add freebsd.
2859 1994-03-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2861 * configure.in: Check for fpathconf.
2863 1994-03-02 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2865 * configure.in (with_x_toolkit): Fix typo in previous change.
2867 1994-03-01 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2869 * configure.in: New s-file for rs60000-ibm-aix3.2.5.
2871 1994-02-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2873 * configure.in (with_x_toolkit): Don't allow motif or open-look.
2875 1994-02-24 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2877 * configure.in: Fix value of docdir.
2878 * Makefile.in (install-arch-indep): Install DOC* in docdir.
2880 1994-02-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2882 * configure.in (*-sysv4.1): Set NON_GNU_CPP.
2884 1994-02-22 Karl Heuer (kwzh@geech.gnu.ai.mit.edu)
2886 * configure.in: New variable docdir to control where the docstring
2888 Makefile.in: Use it to initialize PATH_DOC in paths.h.
2890 1994-02-22 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2892 * configure.in: When --run-in-place, don't inherit archlibdir.
2894 1994-02-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2896 * Makefile.in (install-arch-dep, install-arch-indep):
2897 New targets split up former do-install rule.
2898 (do-install): Target deleted.
2900 1994-02-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2902 * configure.in (mips-sony-newsos*): New configuration.
2904 1994-02-14 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu)
2906 * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
2908 1994-02-11 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2910 * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX.
2912 1994-02-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2914 * configure.in: Don't initialize CC.
2916 1994-02-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2918 * configure.in (creating src/Makefile): Also generate -U switches
2919 for symbols in the $configuration value.
2921 * configure.in: Check for sys_siglist being declared in system header.
2923 1994-02-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2925 * configure.in (creating src/Makefile): Delete blank lines
2926 along with lines of whitespace.
2927 (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value.
2929 1994-02-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2931 * configure.in: Get, use, and substitute C_SWITCH_MACHINE
2932 like C_SWITCH_SYSTEM.
2933 (m68*-motorola-sysv*): Set CC. Require cpu type to be m68k or m68000.
2935 1994-02-04 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2937 * configure.in (drem): Check for this function.
2939 1994-02-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2941 * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces.
2942 If CPP was inherited from environment, don't use NON_GNU_CPP.
2943 (NON_GNU_CC): Likewise.
2944 (handling with_gcc): Use explicit if in the `no' case.
2945 (cc_specified): New variable; if set, don't use NON_GNU_CC.
2947 1994-02-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2949 * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP.
2951 1994-02-01 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2953 * configure.in: Check whether fmod exists.
2955 1994-01-31 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2957 * make-dist: Distribute {src,lisp}/ChangeLog.? instead of
2958 {src,lisp}/OChangeLog.
2960 1994-01-22 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2962 * configure.in: Restore Jan 8 and Jan 16 changes. The -U hack is
2963 necessary for proper operation. This code works with the current
2964 released version of Autoconf.
2966 1994-01-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2968 * configure.in (with_x_toolkit): Treat values athena and lucid alike.
2969 (USE_X_TOOLKIT): Define it for all values except `no'.
2971 * configure.in: Undo first Jan 8 change and Jan 16 change.
2973 1994-01-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2975 * configure.in: Handle --with-x-toolkit. Produce lwlib/Makefile.
2976 Substitute USE_X_TOOLKIT as both C macro and Make variable.
2978 * Makefile.in (lwlib/Makefile): New target.
2979 (SUBDIR_MAKEFILES): Depend on lwlib/Makefile.
2980 (clean, mostlyclean, distclean, realclean): Handle lwlib subdir.
2981 (unlock, relock): Handle lwlib subdir.
2983 * Makefile.in: Add some .PHONY targets.
2985 * make-dist: Handle lwlib subdir like oldXMenu subdir.
2987 * lwlib: New subdirectory.
2989 1994-01-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2991 * configure.in: If CPP has a value that is a directory,
2994 1994-01-16 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2996 * configure.in (srcdir_undefs): Add g flag to sed substitution to
2999 1994-01-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3001 * Makefile.in (do-install): Install the dired-x info files.
3003 * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX.
3006 1994-01-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3008 * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs.
3010 1994-01-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3012 * configure.in (creating src/Makefile): Put code inside 2nd arg to
3013 AC_OUTPUT as it should be; hopefully noone will again see fit to
3014 gratuitously break this and not make a change log entry.
3015 Optimized sed processing of Makefile.in and cpp output; now
3016 preserves comments previously removed from the cpp input.
3017 Eliminated temp file for cpp output. Generate -U switches to
3018 undefine all identifiers that appear in the directory name
3019 ${srcdir}; pass these to cpp.
3021 * configure.in (version): Fix sed regexp to match two-elt version
3024 * configure.in: Check for strerror.
3026 1994-01-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3028 * configure.in: Test for bcmp.
3030 1994-01-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3032 * make-dist (tempdir): Put subdir msdos into the distribution.
3034 1993-01-07 Morten Welinder (terra@diku.dk)
3036 * config.bat: New file.
3038 1994-01-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3040 * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS.
3042 1994-01-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3044 * configure.in (m68*-next-*): Don't care about which os is specified.
3045 (i[34]86-*-*): Check for *-nextstop*.
3047 1993-12-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3049 * configure.in: Check for setsid.
3051 1993-12-17 Richard Stallman (rms@srarc2)
3053 * configure.in (*-sun-solaris*): Add special case for Solaris 2.3.
3055 1993-12-15 Richard Stallman (rms@srarc2)
3057 * Makefile.in (mkdir): Make only the lockdir writable.
3059 * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
3061 1993-12-11 Richard Stallman (rms@srarc2)
3063 * Makefile.in (libdir): Use @libdir@.
3065 1993-12-08 Richard Stallman (rms@srarc2)
3067 * Makefile.in (install): Add empty command.
3069 1993-12-04 Richard Stallman (rms@srarc2)
3071 * make-dist: Put man/getopt.c in the dist.
3073 * configure.in (LIBS): Add test for existence of XSetWMProtocols.
3075 * Makefile.in (install): Depend on ${SUBDIR}, not `all'.
3077 1993-12-03 Richard Stallman (rms@srarc2)
3079 * configure.in (solaris): Set NON_GNU_CPP instead of CPP.
3080 Set it for all solaris versions.
3081 (mips-mips-riscos4*): Set NON_GNU_CC, not CC.
3082 (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP.
3083 Likewise for NON_GNU_CC and CC.
3085 1993-12-01 Richard Stallman (rms@srarc2)
3087 * configure.in (mips-mips-riscos4*): Assign variable CC.
3088 (checking ${with_gcc}): If "no", don't override CC if already set.
3089 (CC): Initialize it as empty.
3091 1993-11-30 Richard Stallman (rms at srarc2)
3093 * configure.in (Suns): Set CPP if *-solaris2.3*.
3095 1993-11-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3097 * Version 19.22 released.
3099 * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs.
3101 1993-11-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3103 * make-dist: When breaking links, use cp -p.
3104 Copy install.sh into distribution.
3105 Move the temp dir up into the parent dir;
3106 don't leave the staging dir make-dist.tmp... in existence.
3107 * install.sh: New file.
3109 1993-11-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3111 * configure.in (i[34]86-ncr-sysv*): New specific alternative.
3113 1993-11-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3115 * configure.in (version): When --run-in-place, exclude
3116 ${datadir}/emacs/site-lisp from locallisppath.
3118 1993-11-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3120 * configure.in: Delete jumk.c before writing it.
3122 1993-11-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3124 * Version 19.21 released.
3126 * Makefile.in (mkdir): Ignore error from chmod.
3128 1993-11-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3130 * make-dist: Don't put lisp/forms.README in the distribution.
3132 1993-11-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3134 * configure.in (creating src/Makefile): Before running cpp,
3135 discard all lines that start with `# Generated' or /**/#.
3137 1993-11-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3139 * Version 19.20 released.
3141 * make-dist: Use build-ins.in, not build-install.in.
3142 Don't bother updating TAGS since it's not included.
3144 * build-ins.in: Renamed from build-install.in.
3146 1993-11-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3148 * make-dist: Don't try to link *.texinfo--there are none now.
3149 When running make in lib-src, specify YACC var value.
3151 1993-10-03 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3153 * configure.in (extrasub): Add vpath patterns for %.[yls].
3155 * configure.in: Don't do seddery on config.status after AC_OUTPUT.
3156 Instead just include the commands to make src/Makefile as the
3157 second arg to AC_OUTPUT.
3159 * configure.in: Use : instead of dnl for comment inside
3162 * configure.in: No longer use vpath_sed. Instead, when we notice
3163 srcdir already configured, set extrasub to hack vpath in the
3166 * configure.in: In cmds to make src/Makefile, chmod Makefile.new
3168 * Makefile.in (VPATH): Define to @srcdir@.
3170 1993-09-28 Brian Fox (bfox@cubit)
3172 * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
3173 doesn't exist. Just copy src/Makefile.in instead. Touch
3174 all of the Makefiles after editing config.status.
3176 * INSTALL: Update documentation to match new configuration
3179 1993-09-27 Brian Fox (bfox@ai.mit.edu)
3181 * configure.in: Allow any of the path or directory Makefile
3182 variables to be set with flags to configure. Create all Makefiles
3183 at configure time. Edit special commands into config.status after
3184 src/Makefile.in is built from src/Makefile.
3186 * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile):
3187 If these files are out of date, simply have config.status
3188 rebuild them; don't rebuild them explicitly.
3190 1993-09-25 Brian Fox (bfox@ai.mit.edu)
3192 * build-install.in: Change src/xemacs to src/emacs. We no longer
3193 create src/xemacs, so the file wouldn't be found.
3195 * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'.
3197 1993-09-24 Brian Fox (bfox@albert.gnu.ai.mit.edu)
3199 * configure.in: Avoid forcing the search of /usr/include before
3200 fixed include files by resetting C_SWITCH_X_SITE if it is
3203 1993-09-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3205 * Makefile.in (@rip_paths@locallisppath):
3206 Delete ${datadir}/emacs/site-lisp.
3208 1993-09-15 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3211 Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value.
3212 Remove ${extra_output} from AC_OUTPUT call.
3214 1993-09-17 Brian Fox (bfox@inferno)
3216 * make-dist: Quote backquotes found in strings to be echoed.
3218 * configure.in: Use "sh -c pwd" when we want to avoid having the
3219 shell fix up the value of $PWD.
3221 1993-09-13 Brian Fox (bfox@inferno)
3223 * Makefile.in (do-install): Don't abort if ln or chmod at the end
3224 of the installation fail. Suggested by Karl Berry.
3226 1993-08-30 Brian Fox (bfox@inferno)
3228 * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make"
3229 was used. Set MAKEFLAGS from MFLAGS.
3231 1993-09-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3233 * configure.in: Test for res_init in libc.
3235 1993-09-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3237 * configure.in: In the file ${tempcname}, use configure___
3238 instead of @configure@.
3240 1993-09-12 Roland McGrath (roland@sugar-bombs.gnu.ai.mit.edu)
3242 * make-dist: Dist vpath.sed
3244 * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile):
3245 Depend on vpath.sed.
3246 Replace sed comand for VPATH with @vpath_sed@.
3248 * configure.in: Substitute variable `vpath_sed'.
3249 If not in $srcdir and $srcdir is configured,
3250 issue warning that GNU make is required,
3251 and set vpath_sed to use vpath.sed script.
3253 1993-09-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3255 * configure.in: Remove check for $srcdir being configured. This
3256 pretty much works now.
3257 Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
3258 Check for XFree86 (/usr/X386/include) independent of whether
3261 * Makefile.in (info, dvi, clean, mostlyclean, distclean,
3262 realclean, unlock, relock): Use `$(MAKE)' in place of plain
3265 1993-08-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3267 * Version 19.19 released.
3269 * configure.in (i386-*-sunos4): Assume Sunos 4.0.
3271 1993-08-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3273 * configure.in: Check for XScreenNumberOfScreen.
3275 1993-08-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3277 * configure.in: Add * to end of all configuration alternatives.
3278 (m68*-sony-newsos3*): New alternative.
3280 1993-08-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3282 * make-dist: Include getdate.c in distribution.
3284 * configure.in: For --help, use $PAGER if it is set.
3285 (LIB_X11_LIB): Default to -lX11.
3286 (mips-sgi-irix5.*): New alternative.
3288 * Makefile.in (do-install): Install info/gnus* and info/sc*.
3290 * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*):
3291 Recognize *.B8.* as hpux version 8.
3292 (m68*-tektronix-bsd*): Fix typo in tek4300.
3293 (AC_HAVE_FUNCS): Add ftime.
3295 1993-08-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3297 * configure.in (m88k-tektronix-sysv3*): Added the missing *.
3298 Use tekxd88, not tekXD88.
3300 1993-08-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3302 * configure.in: Check for -lm. Then can check for frexp and logb.
3304 1993-08-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3306 * Version 19.18 released.
3308 * make-dist (src): Don't put gnu-hp300 in dist.
3309 (src, lisp): Include OChangeLog in dist.
3311 1993-08-08 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3313 * configure.in: Test for presence of logb and frexp functions.
3315 1993-08-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3317 * configure.in (machine): Add i370-ibm-aix*.
3319 1993-08-03 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3321 * configure.in (function checks): Test for mkdir and rmdir.
3323 * configure.in (function checks): Don't test for random and bcopy
3324 only when we're building with X; look for them all the time.
3326 1993-07-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3328 * configure.in: Test for availability of bcopy functions, searching
3329 the X libraries if we're using X.
3331 * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp,
3332 and #define HAVE_AIX_SMT_EXP if we do. This is present in some
3333 versions of AIX, and needs to be passed to the loader.
3335 * configure.in: Test for the availablility of the
3336 XScreenResourceString function.
3338 1993-07-30 David J. MacKenzie (djm@frob.eng.umd.edu)
3340 * configure.in: If we found X on our own, set C_SWITCH_X_SITE and
3341 LD_SWITCH_X_SITE and assume --with-x11.
3342 Only look for X11 files if we weren't told about a window system
3343 or if we were told to use X11 but not told where.
3344 Search the libraries from the s and/or m files when checking for
3347 * configure.in: Remove any trailing slashes in prefix and exec_prefix.
3349 1993-07-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3351 * make-dist: Include lisp/dired.todo in the distribution.
3353 1993-07-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3355 * configure.in: Add code to set HAVE_INET_SOCKETS.
3357 1993-07-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3359 * configure.in: If we do find x_includes and x_libraries
3360 via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE.
3362 1993-07-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3364 * make-dist: Include src/gnu-hp300 in the dist.
3366 * configure.in (canonical): New variable holds the canonicalized
3367 configuration. Don't alter `configuration'. Use `configuration'
3368 for Makefile.in for file naming.
3369 (testing x_includes and x_libraries): Use =, not ==.
3371 1993-07-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3373 * Version 19.17 released.
3375 * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src
3376 directory's makefile. This allows the invocation of CPP which
3377 builds xmakefile to receive these switches. The SunSoft C
3378 preprocessor inserts spaces between tokens if it doesn't get the
3379 -Xs flag requested in src/s/sol2.h.
3381 1993-07-12 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
3383 * configure.in (m68k-bull-sysv3): new config.
3385 1993-07-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3387 * configure.in: Use the autoconf AC_FIND_X macro to try to find
3388 the X Windows libraries.
3390 1993-07-07 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3392 * make-dist (tempdir): Don't create lisp/forms-mode directory in
3393 the distribution. Those files aren't kept in their own
3394 subdirectory any more.
3396 1993-07-06 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3398 * Version 19.16 released.
3400 1993-06-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3402 * configure.in: Add --verbose flag.
3404 1993-06-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3406 * version 19.15 released.
3408 1993-06-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3410 * Makefile.in (top_distclean): Use -f switch when cleaning out
3411 lock dir; it might be empty.
3413 * configure.in: Only check for -lXbsd once.
3415 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3417 * Version 19.14 released.
3419 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3421 * make-dist: If using gzip, create distribution with '.gz' extension.
3423 * make-dist (lisp/term): This doesn't have a ChangeLog anymore.
3424 (lisp/forms-mode): This doesn't exist anymore.
3426 * configure.in: Look for the closedir function.
3428 1993-06-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3430 * configure.in (CPP): Autoconf sets this to a shell variable
3431 reference, which doesn't work when it's edited into a makefile.
3432 Expand that variable reference.
3434 * Makefile.in (CPP): New variable.
3435 (src/Makefile): Edit CPP into src/Makefile.
3437 * Makefile.in (src/Makefile): Don't bother exiting single quotes
3438 and entering double quotes to get the values of LD_SWITCH_X_SITE
3439 and the other make variables; make substitutes them in anyway.
3441 * Makefile.in (uninstall): Don't remove the lisp and etc
3442 directories if they're in the source tree.
3444 Bring mumbleclean targets into conformance with GNU coding standards.
3445 * Makefile.in (mostlyclean, clean): Separate these two; just have
3446 them pass the request to the subdirectory makefiles.
3447 (distclean): Pass the request down, and then get rid of the
3448 files configure built, and get rid of the Makefiles.
3449 (realclean): Pass the request down, and then do the same things
3451 (uninstall, info, dvi): New targets.
3453 * configure.in: Move clause for PC-compatible i386 box to the end
3454 of the case statement, to avoid masking configurations below.
3456 * configure.in: Add case for m88k-motorola-sysv4.
3458 * configure.in: Add support for HP/UX versions 7, 8, and 9 on
3459 the HP 68000 machines.
3461 * configure.in: Put the arguments to LD_SWITCH_X_SITE's and
3462 C_SWITCH_X_SITE's -L and -I switches in quotes, so the
3463 preprocessor won't fiddle with them.
3465 1993-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3467 * Makefile.in (TAGS): cd to src to run etags.
3469 1993-06-12 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3471 * configure.in (version): Check the X libraries for XrmSetDatabase
3472 and random, and see if we have -lXbsd.
3474 1993-06-11 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3476 * configure.in: Pass "-Isrc" to the CPP we run to examine the
3477 s/*.h and m/*.h files. Martin Tomes
3478 <mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it.
3480 1993-06-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3482 * configure.in: Move i386-prime-sysv* and i386-sequent-bsd*
3483 above the general i386 alternative.
3485 1993-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3487 * configure.in: Recognize configuration name for Data General
3490 * configure.in: Use AC_LONG_FILE_NAMES.
3492 1993-06-09 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3494 * configure.in: Test for bison.
3495 * Makefile.in (YACC): New variable.
3496 (lib-src/Makefile.in): Edit YACC into the makefile.
3498 1993-06-08 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3500 * Version 19.13 released.
3502 * configure.in (CFLAGS): Don't set this according to the value of
3503 the GCC shell variable. Instead, consult the machine and system
3504 files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and
3505 test __GNUC__ while we're at it.
3507 * configure.in: Remove extra ;; from hpux cases.
3509 1993-06-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3511 * configure.in: Check to see if the system has -ldnet.
3513 1993-06-08 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3515 * make-dist: Add clauses to distribute lisp/forms-mode.
3517 1993-06-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3519 * configure.in (machine): Fix the versions in hpux version number test.
3520 Do not guess based on cpu type. Do check for explicit system version.
3522 1993-06-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3524 * configure.in: Do NOT look for `unknown' as company name.
3526 1993-06-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3528 * configure.in: Fix typo in message.
3530 1993-06-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3532 * Version 19.12 released.
3534 * Makefile.in (do-install): Correct previous etc-copying change.
3535 Partially rewrite using `if'.
3536 (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE.
3538 * Version 19.11 released.
3540 * configure.in: Handle 386bsd.
3542 1993-05-31 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3544 * make-dist: Update getdate.c.
3546 * configure.in: Handle bsd386.
3548 * Makefile.in (do-install): Use `-' in tar options.
3550 * configure.in: Change ! "${...}" to x"${...}" = x.
3552 * Makefile.in (do-install): Copy the DOC-* files from the build
3553 etc directory, as well as lots of things from ${srcdir}/etc.
3555 * make-dist: Copy config.guess.
3557 * configure.in: Handle AIX versions 1.2, 1.3.
3559 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3561 * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add
3562 the configuration name mips-mips-usg* to represent USG systems.
3564 * configure.in: Fix logic to detect if srcdir is already configured.
3566 * Makefile.in: Pass in LD_SWITCH_X_SITE.
3568 * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd
3569 foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name
3570 of a directory; cd might fail, and have pwd print out the current
3573 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3575 * configure.in: When looking for sources, use '.', not `.`. Also '..'.
3577 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3579 * configure.in: Complain if srcdir points at an already-configured
3582 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3584 * Version 19.10 released.
3586 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3588 * Makefile.in: Use Makefile comments, not C comments.
3590 * configure.in: Add case for the Tektronix XD88.
3592 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3594 * configure.in: Handle sysv4.2 and sysvr4.2.
3596 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3598 * configure.in: Traverse the argument list without destroying it;
3599 don't use shift. It turns out that "set - ${saved_arguments}"
3600 doesn't work portably.
3602 * configure.in: Add missing "fi".
3604 * make-dist: Rebuild configure if configure.in is newer.
3606 * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src
3607 targets to be executed even if make remembers that it has already
3610 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3612 * Makefile.in (do-install): Delete redundant code to copy etc twice.
3614 * configure.in (romp): Handle various version numbers with aos and bsd.
3616 1993-05-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3618 * configure.in: Fix message text.
3620 1993-05-28 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3622 * make-dist: Make a `site-lisp' directory in the distribution,
3623 instead of a `local-lisp' directory, which hasn't been the
3624 appropriate name for a long time.
3625 * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory
3626 from the distribution first, then /usr/local/lib/emacs/site-lisp.
3628 * Makefile.in (do-install): Correctly detect if ./etc and
3629 ${srcdir}/etc are the same.
3631 * configure.in: Extract UNEXEC from the system configuration
3632 files, compute the name of the source file corresponding to the
3633 object file, and #define it as UNEXEC_SRC in config.h.
3635 * configure.in: If srcdir is '.', then try using PWD to make it
3638 * configure.in: Include ${srcdir} in the printed report, to help
3639 people notice if it's an automounter path.
3641 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3643 * configure.in (prefix): Don't run pwd on srcdir unnecessarily.
3645 1993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3647 * Makefile.in (do-install): Delete the dest dir, not the source dir,
3648 when they are different. Add `shift' command.
3649 (COPYDESTS, COPYDIR): Delete external-lisp dir.
3650 (externallispdir): Var deleted.
3652 * configure.in: Delete spurious paren outputting short_usage.
3654 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3656 * Version 19.9 released.
3658 1993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3660 * Makefile.in (${SUBDIR}): Pass the value of the make variable to
3663 * make-dist: Check for .elc files with no corresponding .el file.
3665 * Makefile.in (mkdir): Make all the directories in locallisppath.
3667 * config.guess: New file.
3668 * configure.in: Use it, tentatively.
3669 * INSTNALL: Mention its usage.
3671 * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
3672 the former gives you the operating system rev directly. Use
3673 s/hpux.h if we don't recognize what we got.
3675 * Makefile.in (do-install): Don't remove a destination directory
3676 if it's the same as the source. If ${srcdir}/info == ${infodir},
3677 don't try to copy the info files.
3679 * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this
3680 doesn't work if you're not using a separate source directory.
3681 (do-install): Copy the build tree's etc directory only after
3682 making sure it's not also the source tree's etc directory.
3684 1993-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3686 * configure.in: Handle sunos4.1.3 specially.
3688 1993-05-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3690 * Makefile.in (INSTALL): Add definition.
3692 * configure.in: Fix some messages. Support -with-gnu-cc.
3693 At the end, use `set --', not `set -'.
3694 Delete spurious `.h' in hpux alternatives.
3696 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3698 * Version 19.8 released.
3700 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3702 * configure.in: When looking for source in the same directory as
3703 the configure script, make the path thus discovered absolute.
3704 If the user specifies the `--srcdir' switch, make that directory
3707 * Makefile.in (srcdir): Remove comment saying this doesn't work.
3709 * Makefile.in (src/paths.h): Edit the `infodir' variable into this
3710 too, as the value of the PATH_INFO macro.
3712 * configure.in: Check to see if the source lives in the same
3713 directory as the configure script.
3715 1993-05-24 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3717 * Makefile.in (install): Split this into `install' and
3718 `do-install', to give people more control over exactly what gets
3720 (do-install): New target, containing the guts of `install'. Don't
3721 remove and recreate the directories inside the copying loop - do
3722 it all before the copying loop. Pass more flags to the lib-src
3724 (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
3725 avoid errors and warnings.
3727 * configure.in: For generic IBM PC boxes, insist on "unknown" for
3728 the manufacturer - the more general case was blocking other i386
3729 configuration names below, and that's how the names are written in
3732 * make-dist: When breaking links, remove the link before moving
3733 the copy onto it, to avoid interactive behavior.
3735 * Makefile.in: Doc fix.
3737 * configure.in: Doc fix.
3739 * INSTALL: Mention --exec-prefix option.
3741 * configure.in: Add support for the `--exec-prefix' option.
3742 * Makefile.in: Accept that support.
3744 * configure.in: Use the AC_PROG_INSTALL macro.
3745 * Makefile.in (INSTALL): Variable removed.
3746 (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure.
3748 * configure.in: Distinguish between hp800's and hp700's by calling
3751 1993-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3753 * configure.in: Recognize configuration names for i860 boxes
3756 1993-05-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3758 * configure.in: Distinguish between hp800's and hp700's by the
3759 version of HP/UX they run, since that's something people are more
3760 likely to know - hp700's run 8.0.
3761 Add HP 700 configuration.
3763 * configure.in: Test for the presence of the `rename' function.
3765 * Makefile.in (C_SWITCH_X_SITE): New variable - get this from
3767 (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this.
3769 * make-dist: Break intra-tree links.
3771 * configure.in: Explain that this is an autoconf script, and give
3772 instructions for rebuilding configure from it. Arrange to put
3773 comments in configure explaining this too.
3775 * configure.in: Make the first line of the configure script be
3776 "#!/bin/sh". Leaving the first line blank didn't work.
3778 * configure.in (long_usage): Removed; made short_usage describe
3779 the options briefly.
3781 * configure.in: Implement the --prefix option.
3782 * Makefile.in (prefix): Add support for it here.
3783 * INSTALL: Document it here.
3785 * Makefile.in (install): Don't assume that the files in the `info'
3786 subdirectory match *.info. They don't have that prefix.
3788 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3790 * configure.in: Add case for version 5 of Esix.
3792 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3794 * Version 19.7 released.
3796 * make-dist: There aren't any *.com files in lib-src anymore.
3798 * make-dist: Copy texinfo.tex and texindex.c, rather than linking
3799 them; they're symlinks to other filesystems on the GNU machines.
3801 * make-dist: Check that the manual reflects the same version of
3802 Emacs as stated in lisp/version.el. Edit that version number into
3805 1993-05-21 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3807 * configure.in: Remove the hack of AC_DEFINE; use
3810 1993-05-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3812 * make-dist: Don't distribute precomp.com, compile.com, or
3813 link.com from ./src; they're in ./vms now.
3815 Some time-handling patches from Paul Eggert:
3816 * configure.in: Add AC_TIMEZONE.
3818 1993-05-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3820 * configure.in: Recognize Linux as a valid operating system for
3823 1993-05-18 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3825 * make-dist: Distribute some VMS files we got from Richard Levitte.
3827 * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as
3828 the source for the sed command, not oldXMenu/Makefile.
3830 1993-05-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3832 * INSTALL: Don't claim the srcdir option doesn't work.
3834 1993-05-16 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3836 * configure.in: Include remarks saying what order the autoconf
3837 tests should go in, and remind people to change config.h.in
3838 whenever they add autoconf tests which make #definitions.
3840 * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile.
3842 1993-05-15 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3844 * Makefile.in (oldXMenu/Makefile): Make this depend on
3845 ${srcdir}/oldXMenu/Makefile.in, not itself.
3847 * PROBLEMS: Some updates from David J. Mackenzie.
3849 More changes from David J. Mackenzie.
3850 * Makefile.in (install.sysv, install.xenix, install.aix): Targets
3851 removed; autoconf and config.h should specify all these
3853 (buildlisppath): Make this path depend on ${srcdir}.
3854 (INSTALLFLAGS): Removed.
3855 (INSTALL): Include the -c flag.
3856 (install): Change the way we invoke install accordingly.
3858 Install ${srcdir} changes from DJM.
3859 * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this
3861 (COPYDIR, COPYDESTS): Install files from both the etc directory in
3862 the source tree and the etc directory in the object tree.
3863 (${SUBDIR}): Pass the prefix variable down to submakes.
3864 (everywhere): Use `sed', not `/bin/sed'. Not all systems have sed
3866 (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in
3867 values for srcdir and VPATH.
3868 (install): Add `v' flag to tar command. Make sure that `dir'
3869 exists in ${srcdir}/info before copying it. Remember that the man
3870 pages come from the source tree, not the object tree.
3871 * configure.in: Remove remarks saying that the --srcdir option
3873 Create the etc directory in the object tree.
3874 Recognize configuration names of the form *-sun-solaris*.
3875 Recognize sunos5 and solaris as operating system names.
3877 * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for
3878 lib-src/getdate.y and src/systime.h.
3880 1993-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3882 * make-dist: Make links in info subdir.
3884 1993-05-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3886 * configure.in: Call AC_STDC_HEADERS.
3888 1993-05-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3890 * configure.in: Sidestep autoconf's quoting of the second argument
3891 of AC_DEFINE, so we can specify the value to put there. It would
3892 be nice if autoconf provided some way to specify computed values
3895 1993-05-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3897 * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
3898 this is always just -DHAVE_CONFIG_H.
3900 The GNU coding standards specify that CFLAGS should be left for
3902 * Makefile.in (CFLAGS): Let configure determine the default value
3904 have it default to DEFS.
3905 (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
3906 (lib-src/Makefile, src/Makefile): Edit the default value for
3907 CFLAGS into these files, not DEFS.
3908 * configure.in (CFLAGS): Choose a default value for this - "-g"
3909 normally, or "-g -O" if we're using GCC. Edit it into the
3912 * configure.in: When scanning the machine and system description
3913 #include files, write their names to conftest.c properly.
3915 1993-05-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3917 * configure.in: In configuration name case for Apallos running
3918 Domainios, set opsys, not opsysfile.
3920 * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce
3921 src/config.h, instead of AC_OUTPUT; the latter overwrites
3922 src/config.h even when it hasn't changed, puts a makefile-style
3923 comment at the top even though it's C code, and produces a
3924 config.status script which doesn't do the job right.
3926 * configure.in: Add AC_LN_S test, so we can tell whether or not we
3927 can use a symbolic link to get the X Menu library into src.
3928 * Makefile.in (LN_S): New variable.
3929 (src/Makefile): Edit the value of LN_S into this makefile.
3931 1993-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3933 * configure.in: Support *-sco3.2v4* as opsystem.
3935 * make-dist: Don't include calc directory.
3936 Exclude many files in the man directory; copy a few.
3938 1993-05-04 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3940 * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and
3941 call AC_STRUCT_TM to see what's in time.h.
3943 * configure.in: Employ quoting stupidity to get the value of CPP
3946 1993-04-27 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3948 * configure.in: Use the AC_PROG_CPP macro, and then use the CPP
3949 variable to scan the machine and system description files.
3951 * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h,
3952 so that getdate.y builds correctly.
3954 1993-04-26 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3956 * configure.in (tempcname): Change this to "conftest.c", so it will
3957 work properly on systems with short filenames; this is the name
3960 * configure.in: Also detect the availability of dup2 and
3963 * configure.in: Use the AC_ALLOCA test.
3964 * Makefile.in (ALLOCA): New variable, to be set by ./configure.
3965 (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
3967 1993-04-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3969 * make-dist: Distribute configure, as well as configure.in.
3972 1993-04-23 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3974 * Makefile.in (install): Print out the name of the directory we're
3975 copying, so people can have some idea of whether we're making
3978 * Makefile.in (install.aix, install.xenix, install.sysv, install):
3979 Don't forget to re-create the COPYDESTS directories after we clear
3982 1993-04-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3984 * Makefile.in: Add autoconf cookies so that the configure
3985 script can comment out sections of path variable definitions to
3986 choose between the installable configuration and the run-in-place
3988 * configure.in: Add new option `--run-in-place', to select the
3989 run-in-place path definitions.
3991 * configure.in: Add a clause to the big configuration name case
3992 for the NeXT machine.
3994 1993-04-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3996 * Makefile.in (install, install.sysv, install.xenix, install.aix):
3997 Make sure that each source directory exists, and is different from
3998 the destination directory; then, delete the destination before
3999 copying over the source.
4001 * make-dist: Distribute configure.in, instead of configure.
4003 1993-04-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4005 * configure.in: Don't set CC to "gcc -O" if the user specifies
4006 `--with-gcc'. Add -O to DEFS if GCC is set.
4008 1993-04-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4010 * Makefile.in (clean mostlyclean): Missing right paren.
4012 * configure.in: When checking for X windows, search for an X11
4013 subdirectory of ${x_includes}.
4015 * configure.in: Check for gettimeofday function, for getdate.y.
4017 Change `configure' to a mixture of custom code and autoconf stuff.
4018 autoconf can't derive all the information we need, but we'd really
4019 like to be able to take advantage of some of its tests, and its
4020 file-editing facilities.
4021 * configure.in: Renamed from configure.
4022 Quote the sections of shell script we want copied literally to
4023 the configure script.
4024 (compile): Initialize this to make the autoconf macros' code happy.
4025 Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
4026 code to do their jobs.
4027 Use autoconf to produce Makefile and src/config.h.
4028 Remove the Makefile-style comment that autoconf places at the top
4030 (config_h_opts): Removed - no longer necessary.
4031 * Makefile.in (configname): Renamed to configuration.
4032 (CONFIG_CFLAGS): Renamed to DEFS.
4033 (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
4034 get values via autoload @cookies@.
4035 (libsrc_libs): Get this from autoconf. We used to do nothing
4037 (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
4039 * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
4040 echo the move-if-change command.
4042 1993-04-08 Jim Blandy (jimb@churchy.gnu.ai.mit.edu)
4044 * make-dist: Distribute lib-src/rcs-checkin.
4046 * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms.
4047 Don't try to make links to the RCS or Old subdirectories.
4048 Use the appropriate extension for the compression type in use.
4049 Create the tar file in the shell's initial default directory, not
4051 Erase the whole ${tempparent} tree, not just ${tempdir}.
4053 1993-03-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4055 * Makefile.in (src/paths.h): Don't echo the huge sed command we
4056 use to build paths.h.
4057 (lib-src/Makefile, src/Makefile): Similarly.
4059 * configure: Extend test for working `const' keyword to handle AIX
4062 1993-03-24 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4064 * make-dist: Distribute lisp/term/ChangeLog.
4066 Arrange for C compilation throughout the tree to get
4067 C_SWITCH_SYSTEM from the configuration files.
4068 * configure: Extract C_SWITCH_SYSTEM from the machine and
4069 system-dependent files, and save it in the top-level Makefile.
4070 * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit.
4071 (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile.
4073 * make-dist: Include the VMS support files in oldXMenu in the
4076 * configure: Doc fix.
4078 * configure: Fix corrupted config_h_opts.
4080 * configure: Properly report option names in error messages.
4082 * configure: Properly recognize --x-includes and --x-libraries
4085 * configure: Fix syntax errors in code handling XFree386.
4087 1993-03-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4089 * configure: Add special code to detect XFree386, and tell
4092 * configure: Properly handle extracting values of LIBS_MACHINE and
4093 LIBS_SYSTEM that contain spaces.
4095 * configure: Add `--x-includes' and `--x-libraries' options. I
4096 think these are dopey, but no less than three alpha testers, at
4097 large sites, have said they have their X files installed in odd
4098 places. Implement them by setting C_SWITCH_X_SITE and
4099 LD_SWITCH_X_SITE in src/config.h.
4101 1993-03-22 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4103 * make-dist: Don't distribute etc/Old files.
4105 * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their
4108 1993-03-20 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4110 * make-dist: Fix typo.
4112 1993-03-19 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4114 * make-dist: Corrected typo, fixed it to discard = and TAGS files
4115 in some cases where it should but didn't seen to.
4117 * Makefile.in: Added unlock and relock productions.
4119 1993-03-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4121 * make-dist: Add a --compress option to force make-dist to use
4124 * make-dist: Use gzip, if we can find it.
4126 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4127 make rs6000-ibm-aix default to -aix32.
4129 1993-03-17 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4131 * Makefile.in: Added `Developer's configuration' section.
4133 1993-03-17 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4135 * Makefile.in: Add commented-out variable settings for developer's
4138 1993-03-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4140 * make-dist: Distribute `src/bitmaps' too.
4142 1993-03-14 Charles Hannum (mycroft@hal.gnu.ai.mit.edu)
4144 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4145 make rs6000-ibm-aix default to -aix32.
4147 1993-03-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4149 * configure: Recognize strings like "sysvr0" or "sysvr1" as System V.
4151 * Makefile.in (install.sysv): Add a second `$' in front of
4152 `${dest}', so that the shell will expand it, instead of Make.
4154 * configure: When processing the name of the configure script,
4155 collapse `././' to `./', but leave a single `./' prefix alone.
4157 * configure: Doc fix.
4159 1993-03-04 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4161 * configure: Handle isc3.0 correctly.
4163 1993-02-25 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4165 * make-dist: Don't try to copy the COPYING notice into
4166 external-lisp; we're not distributing that directory any more.
4168 1993-02-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4170 * Makefile.in (install, install.aix, install.xenix, install.sysv):
4171 Remove CVS subdirectories from the installed directory trees, as
4172 well as RCS directories.
4174 1993-02-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4176 * make-dist: Only copy gmalloc.c if we couldn't link it.
4177 Don't try to copy man/{README,Makefile} unless they actually exist.
4179 * Makefile.in (lisppath): Don't include externallispdir in this.
4180 We're not sure whether we're even going to distribute the
4183 1993-02-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4185 * make-dist: Don't distribute the external-lisp directory anymore.
4186 * INSTALL: Remove all references to external-lisp.
4188 * configure: Detect whether the compiler supports `const'
4189 properly, and edit src/config.h accordingly.
4191 * configure: Tweak layout of final report.
4193 * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not
4196 * Makefile.in (locallisppath): Make this default to
4197 ${datadir}/emacs/site-lisp, instead of
4198 ${datadir}/emacs/local-lisp. ${datadir} and ${statedir} are often
4199 the same thing, and local-lisp causes completion conflicts with
4201 (lisppath): Add ${externallispdir} to this.
4202 * INSTALL: Adjust installation directions.
4204 * Makefile.in (externallispdir): New variable, to say where to
4205 install the externally-maintained lisp files.
4206 (COPYDIR, COPYDESTS): Copy the external lisp directory just like
4208 * INSTALL: Describe external-lisp and the new externallispdir
4211 1993-02-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4213 * configure (progname): New option `--with-gcc'. Make it clearer
4214 how we are trying to guess whether or not we have GCC.
4215 * INSTALL: Document the `--with-gcc' option, and improve
4216 description of `--with-x' options.
4218 1993-02-06 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4220 * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and
4221 ${infodir} from these variables; we have written out explicit code
4222 to install the info files.
4224 1993-01-25 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4226 * make-dist: Don't distributed the RCS files in the etc directory.
4228 1993-01-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4230 * Makefile.in: Some makes can't handle comments in the middle of
4231 commands; move them to before the whole rule.
4233 1993-01-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4235 * README: Mention what Emacs is.
4237 1993-01-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4239 * make-dist: Include `./lisp/calc-2.02' in the distribution.
4240 Add `./cpp' and `./man' back into the distribution.
4242 1993-01-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4244 * Makefile.in: Define MAKE, and use where appropriate.
4246 1993-01-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4248 * make-dist: Remember that the authoritative COPYING notice is
4249 `etc/COPYING', not `../etc/COPYING'.
4251 1992-12-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4253 * make-dist: Make sure that the COPYING notices in each directory
4254 are copies, not symlinks.
4256 1992-12-19 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4258 * INSTALL: The build process produces an executable called `emacs'
4259 now. Change references.
4260 * Makefile.in: Adjust `install.mumble' targets to install
4261 `src/emacs', not `src/xemacs'.
4263 * configure: Start with a blank line; this keeps some old CSH's
4264 from thinking it's a CSH script. Most systems will just use
4265 /bin/sh to run it, which is what we're expecting; the only other
4266 shells which might try to interpret it themselves are probably
4269 1992-12-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4271 * INSTALL: Improvements suggested by David Mackenzie.
4273 1992-12-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4275 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4276 Don't try to copy the info files if there aren't any; the
4277 unexpanded globbing pattern disappoints `install'. Ignore the
4278 return status of that command.
4280 * INSTALL: Updated for new configuration arrangement.
4282 * configure: Don't make the top-level Makefile read-only - people
4283 may want to edit the values of the path variables.
4285 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4286 Install the info files in ${infodir}. Install the executable
4287 under both `emacs' and `emacs-VERSION'.
4289 * Makefile.in: Doc fix.
4291 * Makefile.in (exec_prefix): New variable, as per latest version
4292 of coding standards.
4293 (bindir, libdir): Use it, instead of `prefix'.
4294 (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
4296 * Makefile.in (mandir): Make the default value for this depend on
4299 * Makefile.in (datadir, statedir, libdir): Make these all default
4301 (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
4304 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4305 Install the etags and ctags man pages too.
4307 * Makefile.in (distclean): Don't delete backup files; that's the
4309 (extraclean): Like distclean, but deletes backup and autosave files.
4311 1992-12-10 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4313 Make path specification conform to GNU coding standards.
4314 * configure (long_usage): Remove all traces of old arguments from
4315 usage messages, and document the options we do accept in more
4316 detail: -with-x... and --srcdir.
4317 (options, boolean_opts): Deleted; we don't have enough options to
4318 make this worthwhile.
4319 (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
4320 along with the code which supported them; these should be set as
4321 arguments to the top-level make.
4322 (config_h_opts): Since this no longer doubles as a list of option
4323 names, make them upper case; this simplifies the code which uses
4324 them to build the sed command to edit src/config.h. Change the
4325 code which sets them.
4326 (cc, g, O): Don't allow the user to set these using options; they
4327 should be specified using `CC=' and `CFLAGS=' arguments to the
4328 top-level make. Just choose reasonable default values for them,
4329 and edit them into Makefile.in's default CC and CONFIG_CFLAGS
4331 (gnu_malloc, rel_alloc): Don't allow the user to set these using
4332 options; use them whenever the configuration files say they're
4334 Simplify the argument processing loop. Don't accept abbreviations
4335 for option names; these might conflict with other configuration
4336 options in the future.
4337 Add some support for the `--srcdir' option. Check for the sources
4338 in . and .. if `--srcdir' is omitted. If the directories we will
4339 compile in don't exist yet, create them under the current directory.
4340 Note that the rest of the build process doesn't really support
4342 Edit only the top Makefile. That should edit the others. Edit
4343 into the makefile: `version', from lisp/version.el, `configname'
4344 and `srcdir' from the configuration arguments, `CC' and
4345 `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
4346 the user's path, and LOADLIBES as gleaned from the system
4348 Simplify the report generated; it doesn't need to include any
4349 description of paths now.
4350 Make `config.status' exec configure instead of just calling it, so
4351 there's no harm in overwriting `config.status'.
4352 * Makefile.in (version, configname): New variables, used to choose
4353 the default values for datadir and libdir.
4354 Path variables rearranged into two clearer groups:
4355 - In the first group are the variables specified by the GNU coding
4356 standards (prefix, bindir, datadir, statedir, libdir, mandir,
4357 manext, infodir, and srcdir).
4358 - In the second are the variables actually used for Emacs's paths
4359 (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
4360 archlibdir), which depend on the first category.
4361 datadir and libdir default to directories under
4362 ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
4364 etcdir and lispdir default to subdirectories of datadir.
4365 archlibdir defaults to libdir.
4366 The new installation tree is a bit deeper than it used to be, so
4367 use the new make-path program in lib-src to build them all.
4368 Always build a new src/paths.h.tmp and then move-if-change it to
4369 src/paths.h, to avoid unnecessary rebuilds while responding to the
4371 Remove all mention of arch-lib. Run utility commands from
4372 lib-src, and let the executables be copied into archlibdir when
4374 Add targets for src/Makefile, lib-src/Makefile, and
4375 oldXMenu/Makefile, editing the values of the path variables into
4377 Let lib-src do its own installation.
4378 (datadir): Default to putting data files under
4379 ${prefix}/lib/emacs/${version}, not /usr/local/emacs.
4380 (emacsdir): Variable deleted; it would only be confusing to use.
4381 (lispdir, etcdir): Default to ${datadir}/lisp.
4382 (mkdir): Use make-path for this.
4383 (lockdir): Do this in mkdir.
4384 (Makefile): New target.
4386 * configure (usage_message): Rename to long_usage.
4388 * make-dist: Don't bother creating an arch-lib directory; that's
4389 only for installation now.
4391 1992-11-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4393 * configure: Use GCC-style configuration names, using config.sub.
4394 Change the usage and help messages.
4396 * configure: Initialize window_system, not indow_system.
4398 * configure: Report which window system, compiler, and signal
4399 handler return type we decide to use.
4401 * make-dist: Explain what's going on if config.sub and gmalloc.c
4402 can't be linked. Place the code which copies them near the code
4403 which links the rest of the files around them.
4405 1992-11-15 Jim Blandy (jimb@apple-gunkies.gnu.ai.mit.edu)
4407 * make-dist: Don't bother to distribute src/*.com, or
4408 src/vmsbuild; those have all been moved to `../vms'.
4410 1992-11-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4412 * make-dist: Don't forget that the way to avoid filenames starting
4413 with `=' is to use the pattern `[a-zA-Z0-9]*.h', not
4414 `[a-zA-Z0-9].h'. Add a new section for dealing with files that we
4415 couldn't make hard links to, since we have two already, and
4416 perhaps more to come.
4418 1992-11-04 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4420 * configure: When editing parameters into lib-src/Makefile, change
4421 the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS
4422 needs some other flags too.
4424 1992-11-03 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4426 * configure: Remove spurious echo of the configuration name.
4428 * make-dist: Don't distribute files in src/m and src/s whose names
4431 1992-10-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4433 * configure: Update GNU_MALLOC and REL_ALLOC in config.h.
4434 Also LISP_FLOAT_TYPE.
4436 1992-10-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4438 * make-dist: Copy config.sub, since it's a symbolic link to a file
4439 on another file system.
4441 1992-10-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4443 * make-dist: Include lib-src/makedoc.com and emacs.csh in the
4446 * config.sub: New file, to help us recognize configuration names.
4447 * make-dist: Include it in the distribution.
4449 1992-09-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4451 * configure: Convert `-' to `_' in specified option names.
4452 Accept options with --. Delete --highpri and --have-x-menu options.
4453 New options --with-x and --with-x10 replace -window-system.
4454 Don't mention options --gnu-malloc, --rel-alloc
4455 or --lisp-float-type in help message.
4457 1992-09-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4459 * make-dist: Include the `vms' subdirectory in the distribution.
4461 1992-09-10 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4463 * configure: Remove lines starting with "# DIST: " when building
4464 lib-src/Makefile and src/Makefile. This allows us to mark the
4465 "Makefile.in" files with explanatory comments which won't also get
4466 stuck in the Makefiles.
4468 1992-09-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4470 * make-dist: Don't use the '+' operator in the sed regular
4471 expression that extracts the version number from lisp/version.el;
4472 Ultrix sed doesn't seem support the operator. Just double the
4475 1992-09-01 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4477 * Makefile.in: Doc fix.
4479 1992-08-31 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4481 * configure: Rewrite sed command to remove at most one ./ prefix;
4482 Ultrix's sed doesn't allow us to apply the * operator to a \( \)
4485 1992-08-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4487 * Makefile.in (src/paths.h): Use sed, not /bin/sed.
4489 1992-08-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4491 * make-dist: Go ahead and build a new TAGS file, unless the
4492 --newer option was specified. Don't try to delete a TAGS file
4493 from etc; it's not kept there, and shouldn't be deleted anyway.
4495 1992-08-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4497 * make-dist: If the lisp directory contains a default.el, don't
4500 * configure: When searching signal.h for the type of a signal
4501 return handler, make a copy of it, not a symbolic link to it; that
4502 way, it will work on systems that don't have symbolic links.
4504 1992-08-14 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4506 * make-dist: taught it about vcdiff and rcs2log, added --newer
4507 option for generating incremental distributions. Stopped it from
4508 generating a TAGS file into the distribution; that sucker is
4509 *big*, and easily enough generated with the toplevel makefile.
4511 1992-08-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4513 * configure: When writing config.status, don't prefix progname
4514 with a '.'; it might be absolute.
4516 1992-08-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4518 * configure: Choose to use X11 if either /usr/lib/libX11.a or
4519 /usr/include/X11 exist, not only if both exist.
4521 1992-07-27 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4523 * make-dist: Make the new external-lisp directory a duplicate of
4524 the external-lisp directory, not the lisp directory.
4526 1992-07-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4528 * Makefile.in (clean, mostlyclean): Don't bother trying to `make
4529 clean' in arch-lib; it doesn't even have a Makefile.
4531 * Makefile.in (clean, mostlyclean): In the test which tries to
4532 distinguish between the build directory, which should be cleaned,
4533 and the installed directory, which shouldn't, cd to `${emacsdir}',
4534 not `${DESTDIR}${LIBDIR}'.
4536 1992-06-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4538 * make-dist: Be sure to delete the .c and .h files that YACC and
4539 BISON create from getdate.y.
4541 * external-lisp: New directory; see `external-lisp/README'.
4542 * make-dist: Added support for the external-lisp subdirectory.
4544 * make-dist: Changed message which complains that make-dist wasn't
4545 invoked in the right directory to indicate which files it was
4548 1992-06-29 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4550 * configure: Add comments explaining why we can't translate
4551 character ranges or control characters in `tr'.
4553 1992-06-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4555 * configure: When generating the configuration message, we used to
4556 build the message from the start so that each line began with "# "
4557 so that it would be a comment in `config.status'. However, this
4558 causes trouble if any of the variables we use in the message
4559 expand to more than one line of text - as gnu_malloc_reason
4560 sometimes does. So instead, we build the message as it should be
4561 printed to the user (i.e. without the "# " prefixes), and stick on
4562 the "# "s when we write it to `config.status'.
4564 * Makefile.in (clean, mostlyclean): Don't neglect to clean out
4565 `lib-src' and `arch-lib'.
4567 * configure: When generating report and `config.status' file, note
4568 that bindir only determines where `make install' and
4569 `build-install' will place the executables; this should make it
4570 clear that the ordinary build process will not try to install
4573 1992-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4575 * make-dist: Change messages to say that we are 'making links to
4576 X', rather than 'copying X'. And put `' quotes around file names.
4578 * make-dist: Include '.tmp' in the name of the staging directory.
4580 * make-dist: Pass the `-f' option to rm when you're not sure that
4581 the files you're removing actually exist.
4583 * make-dist: When setting up etc/COPYING, always nuke whatever is
4584 there, and then copy it in, to make sure we get a real file.
4586 * make-dist: Don't try to distribute *.defns files any more. The
4587 only such file was for simula.el, which has been superceded by a
4588 version which doesn't have a separate .defns file.
4590 1992-05-28 Ken Raeburn (Raeburn@Cygnus.COM)
4592 * make-dist: Don't distribute configured versions of config.h.in,
4593 paths.h.in, Makefile.in in src.
4595 * configure: Delete .tmp files before creating them; don't bother
4596 trying to make final targets writeable first, since it won't
4597 matter to move-if-change.
4599 1992-05-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4601 * Makefile.in (mkdir, lockdir): Don't put dashes in front of the
4602 mkdir and chmod in the center of all the conditionals. GNU Make
4603 will strip these out, but other makes won't.
4605 1992-05-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4607 * make-dist: Include move-if-change in list of files to distribute.
4609 1992-05-04 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4611 * configure: Remove any "." elements from the program name.
4613 * configure: Don't record the values of all the possible arguments
4614 in config.status; only record the options that the user specified.
4616 * configure: Use move-if-change to move in the new src/config.h.
4618 1992-04-29 Ken Raeburn (Raeburn@Cygnus.COM)
4620 * move-if-change: New file, copied from gcc release.
4621 * Makefile.in (src/paths.h): Use it, and put the "sed" output into
4622 a temp file, so we don't update paths.h if an error occurs or if
4623 it doesn't need changing.
4625 1992-04-28 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4627 * Makefile.in (src/paths.h): Do not install a value for the
4628 PATH_SUPERLOCK value; that macro doesn't exist anymore.
4629 * build-install.in: Same thing.
4631 1992-04-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4633 * make-dist: Check the flag called "make_tar", not "make_dir"; the
4634 latter, being a typo, is always false, resulting in a program
4635 whose default behaviour is to painstakingly build a copy of the
4636 source tree, and then delete it. Rah.
4638 * Makefile.in: Add dist target, and comment for it.
4640 * configure: When scanning <signal.h> for a declaration for
4641 signal, create a symbolic link with a name ending in .c, so the
4642 compiler won't complain that it's only been given .h files.
4644 * configure: Check whether there are any arguments available
4645 before shifting to get the value of a non-boolean parameter.
4647 * make-dist: Doc fix.
4649 1992-04-20 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4651 * configure: Instead of grepping /usr/include/signal.h for a
4652 signal declaration, run /usr/include/signal.h or
4653 /usr/include/sys/signal.h through cpp and grep for the
4656 * configure: Redirect the output of grep to /dev/null instead of
4657 using grep -s - that flag means different things on other systems.
4659 * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath',
4660 since the former is recognizable even if you don't know what
4662 * configure: Accomodate that change.
4664 * configure: Accept options for all of the directories you can
4665 change in the Makefile.
4667 * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE".
4669 * INSTALL: Mention that you have to copy all the 'FOO.in' files to
4670 FOO before you can use them.
4672 * build-install.in: Made the "Where To Install Things" section
4673 conform with the similar section from Makefile.in. Copied section
4674 which builds src/paths.h from src/paths.h.in from the Makefile.
4676 1992-04-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4678 * configure: Write config.status to pass its command-line
4679 arguments on to configure, so that people can use it to recreate
4680 an old configuration, with minor changes.
4682 1992-04-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4684 * configure: Don't rely on option variables being unset if their
4685 values are the empty string. In particular, when producing the
4686 English report, don't assume that highpri will be unset when no
4687 increased priority has been requested; -highpri='' should be the
4688 same as omitting -highpri altogether.
4690 * configure: Fix dumb bug: when running the system and machine
4691 description files through cpp, mark those lines that we want to
4692 evaluate with the string '@configure@', and then only evaluate
4693 them. This way if the files include anything that actually
4694 generates text (type definitions or external declarations, say),
4695 we won't try to eval it.
4697 1992-04-11 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4699 * make-dist: New shell script.
4701 * configure: When creating foo from foo.in, make foo read-only to
4702 remind people to edit the .in file instead.
4704 * INSTALL: Changed references to config.h-dist to config.h.in.
4705 The "BUILDING GNU EMACS BY HAND" section neglected to mention how
4706 to build src/paths.h from src/paths.h.in; added a paragraph to do
4708 * configure, Makefile, build-install: Changed filenames like
4711 1992-04-08 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4713 * Makefile, build-install: Renamed to Makefile.in and
4714 build-install.in; the configure script will edit these to produce
4715 the usable Makefile and build-install.
4716 * configure: Changed to produce ./Makefile, ./build-install,
4717 lib-src/Makefile, and src/Makefile from their *.in counterparts,
4718 instead of editing them in place.
4720 1992-04-07 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4722 * Makefile: Re-arranged so that the undumped Emacs will search
4723 ../lisp *after* the site's local elisp files.
4724 (locallisppath, dumplisppath): New variables.
4725 (lisppath): This variable's default value is now chosen based on
4726 $(locallisppath) and $(lispdir); while it used to be the
4727 customization point for adding site-local elisp directories to
4728 load-path, that job is now handled mostly by locallisppath.
4729 (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH.
4730 Check the values being assigned to the *LOADSEARCH macros for null
4731 path elements (like '::' in 'foo::bar').
4733 * configure: When checking if the machine- and system-dependent
4734 files define a particular macro or not, actually run them through
4735 CPP and test the macros with #ifs, instead of just grepping for
4736 the macros' names. In particular, check for SYSTEM_MALLOC in this
4739 1992-04-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4741 * Makefile (install): Don't use -s in install. (Keep the symbols.)
4743 1992-04-02 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4745 * configure: Make the config.status file an executable shell
4746 script which will recreate the same configuration. Include the
4747 verbal description of the current configuration as a comment in
4751 * Makefile: brought the Makefile up to the GNU coding
4752 standards, as described in standards.text:
4753 (TAGS): New name for the target which rebuilds the tags table.
4754 (check): New target; doesn't do anything yet.
4755 (mostlyclean): New target, synonymous with clean.
4756 (realclean): New target. Currently, this just calls the
4757 subdirectories's makefiles and then deletes config.status.
4758 (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
4760 Installation directory variables changed to conform.
4761 (install, install.sysv, install.xenix, install.aix): Changed the
4762 code which copies the directories into their installed location to
4763 allow the installed locations to be in several different
4764 directories; the old version assumed that they would all be in
4766 (mkdir, lockdir): Allow the installed locations to be in several
4767 different directories.
4770 * build-install: Use the same variable names as the Makefile.
4771 Allow the installed locations to be in several different
4774 1992-03-31 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4776 * Makefile (src/paths.h): Instead of using a single sed command to
4777 edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two
4778 separately, and don't forget to append "/!!!SuperLock!!!" to the
4779 value of the PATH_SUPERLOCK macro.
4781 * config.emacs: Renamed to configure, for consistency with other
4782 GNU products. Internal references changed.
4783 INSTALL, Makefile: References changed.
4785 * lock: New directory, which should always be empty. If this
4786 directory doesn't exist, Emacs won't complain; it just won't lock.
4787 Having this here means that people can just unpack Emacs, build
4788 it, and have locking work.
4790 * share-lib: Re-renamed to etc, for the sake of tradition.
4791 * config.emacs: Changed default value for datadir to ../etc.
4792 * INSTALL, README: Adjusted.
4794 1992-03-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4796 * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile
4797 by running CPP on the appropriate s/*.h and m/*.h files.
4799 1992-03-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4801 * config.emacs: Make sure to set the "exit on error" flag once
4802 we've removed config.status; errors should abort the configuration.
4804 1992-02-15 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4806 * config.emacs: Added -distribute option, so that the Makefile
4807 paths are in their proper form. I don't know why this matters.
4809 1992-02-14 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4811 * local-lisp: New directory, empty in the distribution, for people
4812 to put local elisp code in.
4813 * config.emacs: Include it in the default load path.
4814 * README: Document it.
4816 1992-01-30 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4818 * config.emacs: Guess the type of signal handling functions based
4819 on the contents of /usr/include/signal.h.
4821 * config.emacs: Print out progress report messages.
4823 * Makefile (src/paths.h): Don't generically replace
4824 /usr/local/lib/emacs with LIBROOT. This can hide bugs in the
4825 editing of the other entries, and each entry should be dealt with
4828 * build-install: Converted from C-shell to Bourne shell.
4829 * config.emacs: Edit build-install properly.
4831 * config.emacs: Doc fix.
4833 1992-01-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4835 * Makefile (install): Remove `B' from tar xf command.
4837 1992-01-13 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4839 * config.emacs: Removed support for the `maintain-environment'
4840 option; the only important difference between this and its absence
4842 * INSTALL: Removed mention of `maintain-environment'.
4844 * config.emacs: Fix arguments to sed when processing boolean
4847 1991-12-05 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
4849 * config.emacs: New file, to help automate the installation
4852 * Makefile: Lots of changes to support the separation of etc into
4853 architecture-dependent and -independent files:
4854 (EMACSROOT): New variable, giving the directory under which all of
4855 Emacs's libraries should be installed. Changed rest of file to
4857 (LIBDIR): Now denotes only architecture-dependent dir - relevant cha
4858 (DATADIR): New variable, denoting architecture-independent dir.
4859 (LOCKDIR): New variable, for completeness.
4860 (SUBDIR): No more etc, new lib-src.
4861 (COPYDIR): No more etc, new arch-lib and share-lib.
4862 (src/paths.h): Set PATH_DATA and the LOCK macros too.
4863 (src): Now depends on lib-src, not etc.
4864 * build-install: Changes parallel to the above.
4865 * README: Describe the new arrangement.
4867 * vms: New subdirectory for all the VMS stuff.
4869 1991-12-03 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
4871 * Makefile (LISPPATH): New variable.
4872 (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH.
4874 1990-09-28 Richard Stallman (rms at mole.ai.mit.edu)
4876 * Makefile (install, install.sysv, install.xenix):
4877 Install wakeup instead of loadst. No need for setuid or setgid.
4879 1990-08-07 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4881 * Makefile (clean): Clean etc if that's not the installation dir.
4883 1990-04-26 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4885 * Makefile (paths.h): Make sed alter each name in the path.
4887 1988-08-30 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4889 * Makefile (install.sysv): Use cpio, not tar.
4891 1988-08-03 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4893 * Makefile (lockdir): Rename `lock' target.
4894 Depend on it from install*, not from `all'.
4896 1988-05-16 Richard Stallman (rms at frosted-flakes.ai.mit.edu)
4898 * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin}
4899 to match build-install and paths.h.
4902 ;; coding: iso-2022-7bit-unix