1 2000-07-18 Dave Love <fx@gnu.org>
3 * configure.in: Reorder so that most tests are done after CPPFLAGS
4 is set from the C_SWITCH_... definitions.
6 2000-07-10 Gerd Moellmann <gerd@gnu.org>
8 * configure.in (HAVE_XPM): Undo previous change. Check for
9 preprocessor define XpmReturnAllocPixels.
11 2000-07-06 Gerd Moellmann <gerd@gnu.org>
13 * configure.in (HAVE_XPM): Check for XpmReturnAllocPixels
14 instead of XpmReadFileToPixmap.
16 2000-07-05 Ken Raeburn <raeburn@gnu.org>
18 * configure.in: Check for <soundcard.h>. Look for ossaudio
19 library, and set LIBSOUND accordingly.
21 2000-07-05 Dave Love <fx@gnu.org>
23 * configure.in: Use AC_HEADER_SYS_WAIT.
25 2000-07-05 Gerd Moellmann <gerd@gnu.org>
27 * make-dist: Check DONTCOMPILE in lisp/Makefile.in instead of
28 lisp/Makefile. Distribute lisp/Makefile.in instead of
31 2000-06-30 Ken Raeburn <raeburn@gnu.org>
33 * configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS,
34 while searching for image-handling libraries.
36 2000-06-26 Gerd Moellmann <gerd@gnu.org>
38 * configure.in (--with-xim): New option.
40 2000-06-23 Dave Love <fx@gnu.org>
42 * configure.in [HAVE_TIMEVAL]: Move gettimeofday test here, test
43 for struct timezone and test how we can call gettimeofday.
44 Check for OSF 5+. Check for term.h.
46 * aclocal.m4: Define the post-2.13 stuff conditionally on autoconf
49 2000-06-23 Gerd Moellmann <gerd@gnu.org>
51 * configure.in (HAVE_LIBXP): Change test for libXp.
53 2000-06-21 Dave Love <fx@gnu.org>
55 * configure.in: Check for fcntl.h. Use AC_FUNC_GETLOADAVG, not
56 simple test for getloadavg and substitute GETLOADAVG_LIBS.
57 Simplify test for GETTIMEOFDAY_ONE_ARGUMENT.
59 2000-06-19 Dave Love <fx@gnu.org>
61 * configure.in (GETTIMEOFDAY_ONE_ARGUMENT): Fix in case
62 _XOPEN_SOURCE is defined.
64 2000-06-16 Gerd Moellmann <gerd@gnu.org>
66 * Makefile.in (distclean): Also make distclean in lisp/.
68 2000-06-15 Eli Zaretskii <eliz@is.elta.co.il>
70 * config.bat: Generate lisp/Makefile from lisp/Makefile.in.
72 2000-06-15 Gerd Moellmann <gerd@gnu.org>
74 * make-dist: Add --help and --snapshot options.
76 2000-06-14 Gerd Moellmann <gerd@gnu.org>
78 * configure.in: Generate lisp/Makefile.
80 * configure.in: Add support for `*-lynxos*'.
81 Use `cpp' as NON_GNU_CPP for `alpha*-dec-osf[5-9]*', as
82 recommended by <Karen.Dorhamer@compaq.com> to fix problems
85 2000-06-13 Ken Raeburn <raeburn@gnu.org>
87 * Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when
88 it's on a continuation line.
90 2000-06-02 Dave Love <fx@gnu.org>
92 * Makefile.in: (install-arch-indep): Add pcl-cvs to list of info
95 * configure.in: Don't specify -n32 flag for mips-sgi-irix6.5.
96 Check for struct exception. Use AC_SYS_LARGEFILE and move ftello
99 * aclocal.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES)
100 (AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New.
102 2000-05-26 Gerd Moellmann <gerd@gnu.org>
104 * configure.in: Add check for speed_t typedef.
106 2000-05-25 Ken Raeburn <raeburn@gnu.org>
108 * Makefile.in (install-arch-dep): Install fns-*.el only if it
109 exists; it won't in the CANNOT_DUMP case.
111 2000-05-25 Gerd Moellmann <gerd@gnu.org>
113 * Makefile.in: Ignore exit status of `unset CDPATH' everywhere.
114 On FreeBSD, the exit status is 1 if CDPATH is not set.
115 (install-arch-indep): Install ebrowse.info.
117 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
119 * configure.in: Check for grandpt and getpt.
121 2000-05-09 Dave Love <fx@gnu.org>
123 * Makefile.in (install-arch-indep): Filter CVS as well as RCS.
125 2000-05-05 Gerd Moellmann <gerd@gnu.org>
127 * make-dist: Make a link for lib-src/grep-changelog. Copy
130 2000-05-01 Eli Zaretskii <eliz@is.elta.co.il>
132 * config.bat: Identify the beginning of the cpp stuff in
133 src/Makefile.in and lib-src/Makefile.in more accurately.
135 2000-04-27 Gerd Moellmann <gerd@gnu.org>
137 * configure.in: Add support for `powerpc*-*-linux-gnu*'.
139 2000-04-19 Gerd Moellmann <gerd@gnu.org>
141 * configure.in: Add support for `powerpc-*-netbsd*'.
143 2000-04-19 Dave Love <fx@gnu.org>
145 * configure.in: Don't use AC_FUNC_GETLOADAVG.
147 * aclocal.m4 (AC_FUNC_MKTIME): Use AC_SUBST.
149 2000-04-16 Dave Love <fx@gnu.org>
151 * Makefile.in (${srcdir}/configure): Depend on aclocal.m4.
153 2000-04-14 Dave Love <fx@gnu.org>
155 * configure.in: Use AC_FUNC_GETLOADAVG, AC_FUNC_MKTIME.
157 * aclocal.m4 (AC_FUNC_MKTIME): New.
159 2000-03-28 Ken Raeburn <raeburn@gnu.org>
161 * configure.in: Line up "--help" output a little better.
163 2000-03-26 Gerd Moellmann <gerd@gnu.org>
165 * Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src):
167 (bootstrap): Rewritten in terms of the new targets above. Make
170 2000-03-12 Gerd Moellmann <gerd@gnu.org>
172 * config.guess, config.sub: Use the versions of the files from
175 2000-03-08 Dave Love <fx@gnu.org>
177 * configure.in: Use AC_PROG_RANLIB, AC_C_PROTOTYPES,
178 AC_C_VOLATILE. Define POINTER_TYPE.
180 * aclocal.m4: New file.
182 2000-03-02 Gerd Moellmann <gerd@gnu.org>
184 * configure.in (machine): Add `mipsel-*-netbsd*' and
187 2000-03-01 Gerd Moellmann <gerd@gnu.org>
189 * configure.in (machine): Add support for `*-auspex-sunos*'.
191 2000-02-29 Gerd Moellmann <gerd@gnu.org>
193 * configure.in (C_OPTIMIZE_SWITCH) [__GNUC__]: Use -O2.
195 2000-02-18 Dave Love <fx@gnu.org>
197 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
199 2000-02-18 Andreas Schwab <schwab@suse.de>
201 * Makefile.in (install-arch-indep): Add eudc to list of installed
204 2000-02-17 Ken Raeburn <raeburn@gnu.org>
206 * configure.in: Include -lz and -ljpeg (if it's available) when
207 testing for the tiff library.
209 2000-02-17 Gerd Moellmann <gerd@gnu.org>
211 * configure.in: Remove LISP_FLOAT_TYPE.
213 2000-02-12 Dave Love <fx@gnu.org>
215 * configure.in: Use AC_FUNC_VFORK.
217 2000-02-01 Gerd Moellmann <gerd@gnu.org>
219 * make-dist: Various fixes for new development tree.
221 * leim-Makefile.in: New file.
223 2000-01-31 Gerd Moellmann <gerd@gnu.org>
225 * Makefile.in (dist): Call ./make-dist.
227 2000-01-24 Dave Love <fx@gnu.org>
229 * configure.in: Remove -G0 from Irix NON_GCC_TEST_OPTIONS.
231 2000-01-18 Gerd Moellmann <gerd@gnu.org>
233 * configure.in (HAVE_GIF): Check for DGifOpen instead of
236 2000-01-11 Andreas Schwab <schwab@suse.de>
238 * Makefile.in (install-arch-indep): Update list of info files to
241 2000-01-05 Dave Love <fx@gnu.org>
243 * configure.in: Check for jerror.h as well as libjpeg.
245 2000-01-03 Andreas Schwab <schwab@suse.de>
247 * Makefile.in (install-arch-indep): Install autotype*. Run
248 install-info on autotype and emacs-faq.info.
250 1999-12-04 Dave Love <fx@gnu.org>
252 * Makefile.in: (install-arch-indep): Depend on `info'.
253 (install-strip): Use `install' as sub-make target.
255 1999-11-23 Ken Raeburn <raeburn@gnu.org>
257 * configure.in: Restore Kerberos code deleted on 1999-05-29 that
258 didn't need to be deleted. Check for the k5crypto library as well
259 as the crypto library; MIT Kerberos 1.1 changed the name.
261 1999-11-18 Dave Love <fx@gnu.org>
263 * configure.in: Fix NON_GNU_CPP for Irix 6 to avoid failing tests.
265 1999-11-11 Erik Naggum <erik@naggum.no>
267 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
269 1999-11-08 Dave Love <fx@gnu.org>
271 * configure.in: Fix change for --with-pop default.
273 1999-11-04 Dave Love <fx@gnu.org>
275 * configure.in: Default to --with-pop. Change sense of with-gcc
276 and with-toolkit-scroll-bars messages to reflect the defaults.
278 1999-11-01 Gerd Moellmann <gerd@gnu.org>
280 * INSTALL: Mention the Emacs Lisp Reference.
282 1999-10-27 Noah Friedman <friedman@splode.com>
284 * configure.in: Check for dynamic ptys (/dev/ptmx, /dev/pts/).
286 1999-10-23 Gerd Moellmann <gerd@gnu.org>
288 * Makefile.in (bootstrap): New target.
290 1999-10-19 Paul Eggert <eggert@twinsun.com>
292 Add support for large files. Merge glibc 2.1.2.
294 * configure.in (AC_CHECK_HEADERS): Add stdio_ext.h.
295 (HAVE_TM_GMTOFF): New symbol.
296 (AC_CHECK_FUNCS): Add __fpending, ftello, getloadavg, mblen,
298 (LOCALTIME_CACHE): Don't include stdlib.h, as config.h does this now.
300 1999-10-09 Stefan Monnier <monnier@cs.yale.edu>
302 * make-dist (dontcompile): look for the DONTCOMPILE variable rather
303 than the obsolete dontcompilefiles pseudo-rule in lisp/Makefile.
305 1999-10-09 Richard M. Stallman <rms@gnu.org>
307 * Makefile.in (uninstall, install-arch-indep, install-arch-dep):
308 Unset CDPATH to prevent cd from generating output.
310 1999-10-08 Stefan Monnier <monnier@cs.yale.edu>
312 * update-subdirs: also ignore CVS subdirs.
314 1999-10-07 Gerd Moellmann <gerd@gnu.org>
316 * Makefile.in (install-arch-indep): Add ada-mode.
318 1999-10-06 Dave Love <fx@gnu.org>
320 * Makefile.in: Add rules for config.status, configure.
322 1999-09-07 Gerd Moellmann <gerd@gnu.org>
324 * configure.in (--with-sound): Removed.
326 1999-08-30 Gerd Moellmann <gerd@gnu.org>
328 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after
330 (HAVE_TIFF): Add -lm to library check.
332 1999-08-28 Richard Stallman <rms@gnu.org>
334 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for
335 -lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down
336 after the other X-related libraries.
338 1999-08-21 Dave Love <fx@gnu.org>
340 * configure.in: Don't check for jpeglib.h.
342 1999-08-20 Gerd Moellmann <gerd@gnu.org>
344 * configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h.
345 (HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none.
347 1999-08-18 Dave Love <fx@gnu.org>
349 * configure.in: : Check for termcap.h.
351 1999-08-15 Gerd Moellmann <gerd@gnu.org>
353 * configure.in: Add --with-toolkit-scroll-bars. If "no",
354 use Emacs' scroll bars, even if configured for Motif or when
357 1999-08-12 Wolfgang Rupprecht <wolfgang@wsrcc.com>
359 * configure.in: Check for getaddrinfo.
361 1999-08-04 Eli Zaretskii <eliz@gnu.org>
363 * config.bat: Make --no-debug work again by removing -gcoff.
365 1999-07-30 Dave Love <fx@gnu.org>
367 * configure.in: Check for stdlib.h.
369 1999-07-19 Dave Love <fx@gnu.org>
371 * configure.in: Grok sparc64-*-linux-gnu*.
373 1999-07-12 Richard Stallman <rms@gnu.org>
375 * Version 20.4 released.
377 1999-06-23 Karl Heuer <kwzh@gnu.org>
379 * make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state.
380 Quote $EMACS, in case it's a program with args.
382 1999-05-29 Richard M. Stallman <rms@gnu.org>
384 * configure.in: Delete the Kerberos stuff.
386 1999-05-27 Greg Hudson <ghudson@mit.edu>
388 * configure.in: Prefer kerberos 5 names.
390 1999-04-26 Richard M. Stallman <rms@gnu.org>
392 * configure.in: Check for libXp.
394 1999-04-08 Richard Stallman <rms@gnu.org>
396 * make-dist: Include change logs in subdirs of `lisp'.
398 1999-04-05 Richard Stallman <rms@gnu.org>
400 * Makefile.in (mkdir): If we create ${datadir}, make it world-readable.
401 (install-arch-indep): Make ${datadir}/emacs world-readable.
403 1999-03-30 Eli Zaretskii <eliz@gnu.org>
405 * config.bat: Use epaths.* instead of paths.*.
407 1999-03-07 Eli Zaretskii <eliz@gnu.org>
409 * INSTALL: Add detailed instructions to unpack and install
412 1999-02-26 Richard Stallman <rms@gnu.org>
414 * configure.in: Use epaths.h and epaths-force instead of paths....
416 * Makefile.in (epaths-force): Renamed from paths-force;
417 operate on epaths.in and produce epaths.h.
419 1999-02-24 Richard Stallman <rms@gnu.org>
421 * make-dist: Fix nt/icons directory handling.
423 1999-02-22 Simon Josefsson <jas@pdc.kth.se>
425 * configure.in (f301-fujitsu-uxpv4.1): New target.
427 1999-02-20 Richard Stallman <rms@gnu.org>
429 * make-dist (tempparent): Fix command to update info files.
431 1999-02-09 Richard Stallman <rms@gnu.org>
433 * configure.in (powerpc-apple-netbsd*): New alternative.
435 1999-01-25 Geoff Voelker <voelker@cs.washington.edu>
437 * make-dist: Include the new directory nt/icons in distributions.
439 1999-01-19 Richard Stallman <rms@psilocin.ai.mit.edu>
441 * configure.in: Change message about HAVE_XFREE386.
443 1999-01-07 Eli Zaretskii <eliz@gnu.org>
445 * config.bat: Support configuring with leim.
447 1998-12-16 Petri Kaurinkoski <Petri.Kaurinkoski@hut.fi>
449 * configure.in (mips-sgi-irix6.5): New target.
451 1998-12-16 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
453 * configure.in: Remove GSS-API support, since it has been removed
456 1998-12-04 Markus Rost <rost@delysid.gnu.org>
458 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
460 1998-12-04 Andreas Schwab <schwab@delysid.gnu.org>
462 * Makefile.in: Don't install customize info file. Run
463 install-info on viper info file.
465 1998-11-29 Richard Stallman <rms@psilocin.ai.mit.edu>
467 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
469 1998-11-16 Kenichi Handa <handa@etl.go.jp>
471 * configure.in (*-*-bsdi4*): New target.
473 1998-11-13 Ehud Karni <ehud@unix.simonwiesel.co.il>
475 * configure.in: Fix previous change.
477 1998-11-11 Richard Stallman <rms@gnu.org>
479 * configure.in (aviion-intel): New machine.
481 1998-11-04 Kenichi Handa <handa@etl.go.jp>
483 * configure.in (mips-nec-sysv4*): New target.
485 1998-11-03 Andreas Schwab <schwab@delysid.gnu.org>
487 * Makefile.in (install-arch-dep): Fix last change and use fns-*.el
490 1998-10-31 Richard Stallman <rms@psilocin.ai.mit.edu>
492 * make-dist: Don't include fns*.el in dist.
494 1998-10-30 Dave Love <fx@gnu.org>
496 * configure.in: Don't mkdir cpp.
498 1998-10-30 Andreas Schwab <schwab@delysid.gnu.org>
500 * Makefile.in (install-arch-dep): Install src/fns-*.el in
503 1998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu>
505 * Version 20.3 released.
507 1998-07-30 Paul Eggert <eggert@twinsun.com>
509 * Makefile.in (Makefile, src/Makefile, src/config.stamp)
510 (lib-src/Makefile, man/Makefile, oldXMenu/Makefile)
511 (lwlib/Makefile, leim/Makefile):
512 Prepend $(srcdir)/ to rule dependencies outside this dir.
514 1998-06-30 Richard Stallman <rms@psilocin.ai.mit.edu>
516 * configure.in: Use unset CDPATH instead of making it empty.
518 1998-06-20 Karl Heuer <kwzh@gnu.org>
520 * configure.in: Assume unspecified Solaris is 2.5, not 2.4.
522 1998-06-07 Richard Stallman <rms@psilocin.ai.mit.edu>
524 * make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el
525 and default.el. Sort the results.
527 1998-05-31 Karl Heuer <kwzh@gnu.org>
529 * Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't
532 1998-05-14 Richard Stallman <rms@psilocin.ai.mit.edu>
534 * Makefile.in (install-arch-indep):
535 Don't alter site-lisp/subdirs.el if it exists.
537 1998-05-12 Richard Stallman <rms@psilocin.ai.mit.edu>
539 * Makefile.in (install-arch-indep): Put `-' on commands to create
540 subdirs.el in site-lisp dirs.
542 1998-05-07 Richard Stallman <rms@psilocin.gnu.org>
544 * Makefile.in (install-arch-indep): Fix typo in previous change.
546 1998-05-06 Richard Stallman <rms@psilocin.gnu.org>
548 * Makefile.in (install-arch-indep): Pass --dir-file to install-info.
550 1998-04-28 Richard Stallman <rms@psilocin.gnu.org>
552 * Makefile.in (mkdir): Create the site-lisp dirs.
553 (install-arch-indep): Make site-lisp/subdirs files world-readable.
555 1998-04-26 Richard Stallman <rms@psilocin.gnu.org>
557 * Makefile.in (INSTALL_INFO): New variable.
558 (install-arch-indep): Don't replace the dir file if it already exists.
559 Use the install-info program, via INSTALL_INFO, to add entries.
560 Make the `info' subdir and the Info files world-readable.
562 1998-04-16 Eli Zaretskii <eliz@delysid.gnu.org>
564 * config.bat: Make sure the environment is large enough to support
565 all the "set foo=bar" commands. Update pointers to DJGPP FTP
568 1998-04-10 Karl Heuer <kwzh@gnu.org>
570 * make-dist: Don't accept EMACS=t when testing for $EMACS set.
572 1998-04-06 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
574 * configure.in: Add --with-gssapi to specify GSS-API
575 authentication support for movemail.
577 1998-04-02 Richard Stallman <rms@psilocin.ai.mit.edu>
579 * Makefile.in (install-arch-indep): Fix previous change.
581 1998-03-30 Richard Stallman <rms@psilocin.ai.mit.edu>
583 * Makefile.in (info): Run man in build dir, not srcdir.
585 1998-03-28 Richard Stallman <rms@psilocin.ai.mit.edu>
587 * Makefile.in (install-arch-indep): Fix previous change.
589 1998-03-23 Kenichi Handa <handa@etl.go.jp>
591 * Makefile.in (top_distclean): Check the existence of `lock'
594 1998-03-22 Richard Stallman <rms@gnu.org>
596 * Makefile.in (install-arch-indep): Put special subdirs.el files
597 in site-lisp dirs. Use normal-top-level-add-subdirs-to-load-path.
599 1998-03-21 Richard Stallman <rms@psilocin.gnu.org>
601 * make-dist: Fix shell syntax in check for missing .el or .elc files.
603 1998-03-09 Richard Stallman <rms@psilocin.gnu.org>
605 * configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10.
606 (m68*-hp-hpux*): Handle versions 1X like 10.
608 1998-03-07 Richard Stallman <rms@psilocin.gnu.org>
610 * make-dist: PROBLEMS is now in etc, not top level dir.
612 * Makefile.in (SOURCES): Delete PROBLEMS.
614 1998-02-25 Richard Stallman <rms@gnu.org>
616 * configure.in (hppa*-hp-hpux*): Use hpux10 by default.
618 * Makefile.in (install-arch-indep): Do chmod a+x on subdirs.
620 1998-01-17 Richard Stallman <rms@gnu.org>
622 * Makefile.in (install-arch-indep): Add semicolon before `else'.
624 1998-01-02 Richard Stallman <rms@psilocin.gnu.org>
626 * make-dist (tempparent): New option --no-check.
628 * make-dist: Don't do anything with cpp directory.
630 1997-12-20 Richard Stallman <rms@psilocin.gnu.org>
632 * configure.in (sparc-fujitsu-sysv4*): New target.
634 1997-12-17 Andreas Schwab <schwab@gnu.org>
636 * configure.in: Cache more tests. Add missing quotes around
637 message with embedded comma.
639 1997-12-04 Karl Heuer <kwzh@gnu.org>
641 * Makefile.in (unlock, relock): Don't reference cpp/ directory.
643 1997-11-26 Joel N. Weber II <devnull@gnu.org>
645 * make-dist: Changed the comment about `umask 0' to say `Don't
646 restrict access to any files.'; previously it said `Don't protect
647 any files', which may have implied that we think fascism is good.
649 1997-11-24 Paul Eggert <eggert@twinsun.com>
651 * configure.in (AC_CHECK_FUNCS): Add strftime. The new GNU C library
652 strftime needs the underlying host's strftime for locale dependent
655 1997-11-20 Abraham Nahum <miko@uxsrvc.tti.co.il>
657 * configure.in (i586-dg-dguxR4.*): New name in case branch.
659 1997-11-20 Eli Zaretskii <eliz@is.elta.co.il>
661 * config.bat: Configure the man subdirectory.
663 1997-11-07 Paul Eggert <eggert@twinsun.com>
665 * configure.in (AC_CHECK_LIB): Add -lintl.
667 1997-11-07 Karl Heuer <kwzh@gnu.org>
669 * make-dist (check for .elc files): Avoid bash-specific syntax.
670 (check for overflow 14-char limit): Simplify.
672 1997-11-07 Richard Stallman <rms@gnu.org>
674 * Makefile.in (install): Move blessmail last.
676 1997-10-02 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
678 * configure.in (gettimeofday, one arg or two):
679 Clarify messages by avoiding double negative.
681 1997-09-30 Karl Eichwalder <ke@suse.de>
683 * Makefile.in (install-arch-indep): install the widget info file.
685 1997-09-24 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
687 * configure.in (with-pop, with-kerberos): Need to check Kerberos
688 libraries in reverse order, so that libraries will appear in the
689 correct dependency order on the link line (and so that the
690 configure checks themselves will work properly when early
691 libraries depend on later ones).
693 1997-09-21 Erik Naggum <erik@naggum.no>
695 * make-dist (making links to `src'): Keep timestamp on copied
698 * make-delta: New script to produce delta distributions.
700 1997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
702 * Version 20.2 released.
704 1997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
706 * Version 20.1 released.
708 * Makefile.in (install-leim): Depend on mkdir.
709 (leim): Depend on src.
711 1997-09-13 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
713 * configure.in: Recognize alpha* instead of just alpha.
715 1997-09-12 Paul Eggert <eggert@twinsun.com>
717 * leim-Makefile.in (mostlyclean, maintainer-clean): New targets.
719 1997-09-12 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
721 * update-subdirs: Use rm -f.
723 1997-09-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
725 * update-subdirs: Delete subdirs.el if this dir has no subdirs.
726 Ignore subdirs named Old.
728 1997-08-04 Kenneth Stailey <kstailey@elbereth.disclosure.com>
730 * configure.in: Add OpenBSD clause to set $machine.
732 1997-09-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
734 * make-dist: Recompile everything after updating various Lisp files.
735 Recompile in leim as well as lisp.
736 Check in leim as well as lisp for mismatched files and too-long names.
738 1997-09-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
740 * Makefile.in (TAGS tags): Simply refer this to the src subdir.
742 1997-08-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
744 * Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it
745 before trying to copy anything from it.
747 1997-08-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
749 * Makefile.in (man/Makefile): New target.
750 (tags): Define env var EMACS and run Makefile from build dir.
752 1997-08-27 Eli Zaretskii <eliz@psilocin.gnu.ai.mit.edu>
754 * config.bat: If src/_gdbinit doesn't exist, try using
755 src/.gdbinit to create it (for building on Windows 95).
757 1997-08-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
759 * Makefile.in (install-arch-indep):
760 Discard extra data in tar | tar pipes.
762 1997-08-24 NIIBE Yutaka <gniibe@mri.co.jp>
764 * configure.in (x_default_search_path): Corrected
765 '${x_library}' to '${x_library}/X11'.
767 1997-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
769 * configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1,
771 1997-08-22 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
773 * configure.in: Support auto-configuration of both Kerberos V4 and
774 Kerberos V5 for movemail, including detection of V4 and V5 header
777 1997-08-16 NIIBE Yutaka <gniibe@etl.go.jp>
779 * configure.in: Compute x_default_search_path
780 and substitute into makefiles.
782 * Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h.
784 1997-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
786 * Makefile.in (install-arch-indep): Run list-load-path-shadows.
788 1997-08-07 Erik Naggum <erik@naggum.no>
790 * configure.in: Remove lockdir, it is no longer needed.
791 * Makefile.in (mkdir): Don't create lockdir.
792 (lockdir): Variable deleted.
793 (paths-force): Don't operate on PATH_LOCK.
795 1997-08-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
797 * leim-Makefile.in (clean, distclean): New targets.
799 * make-dist: Include leim/ChangeLog in leim distribution.
801 1997-08-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
803 * configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP.
805 1997-07-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
807 * Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS.
809 1997-07-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
811 * Makefile.in (LDFLAGS): Get this from configure, like CFLAGS.
813 1997-07-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
815 * make-dist: Update leim/leim-list.el.
816 Pass along value of $EMACS when updating lisp dir.
818 1997-07-25 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
820 * configure.in (doug_lea_malloc): Make __after_morecore_hook a
821 prerequisite to the use of Doug Lea's malloc.
823 1997-07-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
825 * Makefile.in (top_distclean): Use -f to delete contents of lock dir.
827 * make-dist: Use name leim/SKK-DIC, not leim/SKK.
829 1997-07-16 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
831 * make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim.
833 1997-07-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
835 * configure.in (mips-sony-newsos6*): File news-risc.h renamed
838 1997-07-10 Eli Zaretskii <eliz@is.elta.co.il>
840 * config.bat: Use `sed' instead of `cp', which might not be
843 1997-07-09 Kenichi Handa <handa@etl.go.jp>
845 * Makefile.in (mostlyclean): Add cleaning leim directory.
846 (clean, distclean, maintainer-clean): Likewise.
848 1997-07-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
850 * make-dist (bogosities): Check subdirs of `lisp' also.
852 1997-07-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
854 * make-dist (etc): Really avoid symlinks now.
855 (lisp): Don't delete from subdirs the things we never copy.
857 1997-07-07 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
859 * Makefile.in (install-arch-indep): Correct the target name.
860 The first letter `i' was dropped by the previous change of mine.
862 1997-07-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
864 * configure.in (leim/Makefile): Generate this.
865 (*-sysv4.2uw*): Recognize new alternative.
867 * leim-Makefile.in: Renamed from leim-Makefile.
869 * make-dist: Set up real-leim subdirectory,
870 with the real contents of leim; then move it to
871 a separate top-level directory.
873 * make-dist: Don't mention site-lisp, site-init, site-start
874 or default, when listing files hat are not compiled and should be.
876 * configure.in: Create src/config.stamp at the end.
878 1997-07-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
880 * Makefile.in (install-leim): Correct previous change.
882 1997-07-02 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
884 * Makefile.in (install-leim): New target.
885 (install): Depend on install-leim.
887 1997-07-01 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
889 * Makefile.in (SUBDIR): Add leim.
890 (SUBDIR_MAKEFILES): Add leim/Makefile.
891 (leim/Makefile): New target.
893 1997-07-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
895 * leim-Makefile: New file.
896 * make-dist: Initialize a `leim' subdirectory with that makefile.
898 1997-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
900 * configure.in (GNU_MALLOC_reason): Fix message text.
902 1997-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
904 * make-dist (lisp): Don't process subdirs that start with =.
905 (etc): Copy symlinks, as in src.
907 1997-06-26 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
909 * configure.in (i*86-*-unixware*): New alternative.
911 1997-06-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
913 * Makefile.in (src/config.stamp): Target renamed from src/config.h
914 and touch it explicitly.
916 * configure.in (mips-sony-newsos6*): New alternative.
917 (mips-*-linux-gnu*): New alternative.
918 (*-*-bsdi*): New alternative.
919 (i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives.
921 1997-06-22 Dave Love <d.love@dl.ac.uk>
923 * Makefile.in (lib-src): Depend on src/config.h (e.g. for
925 (src/config.h): New target to re-configure if src/config.in
928 1997-06-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
930 * configure.in (shutdown): Check for `shutdown' function.
932 1997-06-18 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
934 * update-subdirs: Include the directory "language" in subdirs.
936 1997-06-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
938 * configure.in (m88k-dg-dgux4*): New alternative.
939 (alpha-*-netbsd*): New alternative.
940 (powerpcle-*-solaris2*): New alternative.
942 1997-05-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
944 * make-dist: Warn about .el files that are not compiled.
946 1997-05-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
948 * Makefile.in (dist): Don't run update-subdirs here,
949 since make-dist now gets that done.
951 * make-dist: Use the new `updates' target in lisp/Makefile.
953 * make-dist: Use new non-file targets in lisp/Makefile.
955 1997-04-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
957 * make-dist: Handle all subdirs of `lisp' uniformly.
958 Don't handle `term' and `language' specially.
959 Clear out umask at the beginning.
961 1997-04-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
963 * make-dist: Use Make to update finder-inf.el and autoloads.
964 Also update cus-load.el.
966 1997-04-09 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
968 * configure.in (doug_lea_malloc): First check for SYSTEM_MALLOC,
969 in case it is desirable to disable the GNU malloc features with
972 1997-04-08 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
974 * configure.in (DOUG_LEA_MALLOC):
975 Define if malloc_{get,set}_state exist.
977 1997-03-05 Ken'ichi Handa <handa@etl.go.jp>
979 * make-dist: Make links for files under lisp/language.
981 1997-02-20 Kenichi Handa <handa@etl.go.jp>
983 * update-subdirs: Exclude the directory "language" from subdirs.
985 1997-01-26 Karl Heuer <kwzh@gnu.ai.mit.edu>
987 * configure.in: Check for rint and cbrt.
989 1997-01-01 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
991 * make-dist: Use $EMACS to say where to run Emacs.
992 Add --no-update option.
994 1996-12-30 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
996 * configure.in (hppa1.1-hitachi-hiuxmpp): New configuration.
998 1996-12-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1000 * make-dist (copying src): Check thoroughly for symlinks
1001 and copy them in all cases. Regularize the linking of *.in
1002 and *.opt and ChangeLog files.
1003 (copying lib-src): Likewise.
1004 Don't rm getdate.c or y.tab.*--they don't exist any more.
1006 1996-12-18 Jonathan I. Kamens <jik@annex-1-slip-jik.cam.ov.com>
1008 * configure.in: Check for libmail, maillock.h and
1009 touchlock (for movemail).
1011 1996-12-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1013 * configure.in (limits.h): Check for this file.
1015 1996-12-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1017 * configure.in (rs6000-ibm-aix4.2): New alternative.
1018 (rs6000-ibm-aix4.0): New alternative.
1019 (rs6000-ibm-aix4*): Assume aix 4.1 by default.
1021 1996-11-22 Ben Harris <bjh21@cam.ac.uk>
1023 * configure.in: Recognize vax-*-netbsd*.
1025 1996-11-06 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1027 * configure.in (locallisppath): Add leim directory.
1029 1996-10-31 Eli Zaretskii <eliz@is.elta.co.il>
1031 * config.bat: Make sure `mv' supports forward slashes and -f.
1033 1996-10-28 Christian Limpach <chris@nice.ch>
1035 * configure.in (hppa*-next-nextstep*): * added after hppa
1036 to accept hppa1.0 and hppa1.1.
1038 1996-10-05 Marcus G. Daniels <marcus@coulee.tdb.com>
1040 * configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX.
1041 * configure.in (ld_switch_machine): Fix typo.
1043 1996-09-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1045 * configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE
1046 from config.h and use them in $ac_link.
1048 1996-09-28 Erik Naggum <erik@psilocin.gnu.ai.mit.edu>
1050 * configure.in: Create a subdir named `lisp'.
1052 1996-09-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1054 * configure.in: Check for getcwd.
1056 1996-09-04 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1058 * configure.in: Check for termios.h. Check for setpgid.
1060 1996-08-31 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1062 * configure.in: Check for setrlimit.
1064 1996-08-31 Paul Eggert <eggert@twinsun.com>
1066 * configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo.
1068 1996-08-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1070 * configure.in: Check for utimes.
1072 * configure.in: Check for com_err library, but only
1073 if --with-kerberos was used. Check for krb and des
1074 only if --with-kerberos.
1076 1996-08-26 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1078 * Makefile.in (INSTALL_STRIP): New variable.
1079 (install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM.
1080 (install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src.
1082 1996-08-25 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1084 * configure.in: Check for krb and des libraries.
1086 1996-08-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1088 * configure.in (*-sunos4.1.[3-9]*noshare):
1089 Use sunos413, not sunos4-1-3.
1090 (m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3.
1091 (arm-acorn-riscix1.2*): Use riscix12, not riscix1-2.
1093 1996-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1095 * Makefile.in (src/paths.h): Target deleted.
1096 (paths-force): Delete all dependencies on this target
1097 but don't delete the target.
1098 (install): Depend on `all'.
1099 (paths-force): Don't print a message.
1101 * configure.in: Generate src/paths.h here.
1103 1996-08-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1105 * configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS):
1106 New variables that affect linking only.
1107 (alpha-dec-osf*): Use those instead of previous change.
1109 1996-08-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1111 * Makefile.in (install-arch-indep): Install info/messages.
1113 1996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1115 * Version 19.33 released.
1117 1996-08-10 Marcus Daniels <marcus@sayre.sysc.pdx.edu>
1119 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1120 Fix previous change.
1122 1996-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1124 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1127 1996-08-07 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1129 * configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS
1130 and NON_GCC_TEST_OPTIONS.
1132 1996-08-06 Paul Eggert <eggert@twinsun.com>
1134 * configure.in (LOCALTIME_CACHE): Don't put a string literal
1135 "TZ=..." in environ.
1137 1996-08-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1139 * make-dist (msdos): Add is_exec.c, sigaction.c to distribution.
1141 1996-08-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1143 * configure.in (*-sunos4.1.[3-9]*noshare): Move this before
1144 the more general *-sunos4.1.[3-9]* clause.
1146 1996-07-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1148 * Version 19.32 released.
1150 * configure.in (*-sco3.2v5*):
1151 Set OVERRIDE_CPPFLAG to a string of one space.
1152 Fix the code that uses OVERRIDE_CPPFLAG.
1154 1996-07-16 Karl Heuer <kwzh@gnu.ai.mit.edu>
1156 * configure.in: Undo previous change.
1158 1996-07-16 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1160 * config.sub: Use `pc', not `unknown', when canonicalizing
1161 the vendor for ...86.
1163 1996-07-15 David Mosberger-Tang <davidm@AZStarNet.com>
1165 * configure.in: Check for termios.h header.
1167 1996-07-11 Bill Mann <dvmann@dvncr.praxisint.com>
1169 * configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3
1171 1996-07-07 Karl Heuer <kwzh@gnu.ai.mit.edu>
1173 * configure.in: Split bsdos2 and bsdos2-1.
1175 1996-07-06 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1177 * config.sub: If last two words are not a recognized
1178 KERNEL-OS pair, use just the last word as OS, as in 19.31.
1179 Make conversion of gnu/linux to linux-gnu really work.
1181 * config.sub: If vendor unspecified with i386, use `pc' not `unknown'.
1183 1996-06-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1185 * configure.in (check for using Lucid widgets by default):
1186 Eliminate indentation that confuses some compilers.
1188 1996-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1190 * config.sub: Convert linux and gnu/linux to linux-gnu.
1192 * make-dist: Don't update getdate.c.
1193 Ignore =... files when checking for too-long Lisp file names.
1195 1996-06-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1197 * configure.in (euidaccess): Check for that, not for eaccess.
1199 1996-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1201 * configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from
1203 (mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS.
1205 1996-06-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1207 * configure.in: Rename lignux to linux-gnu in configuration names.
1208 Use gnu-linux as the opsys value (s/ file name).
1209 Allow i686 just like i386, i486, i586.
1211 1996-06-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1213 * configure.in (i*86-*-sco3.2v5): New alternative.
1214 (OVERRIDE_CPPFLAG): New variable.
1215 (CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that.
1217 * configure.in: Specify vpath for .texi files.
1219 1996-06-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1221 * configure.in: Always check for HAVE_X11R5.
1222 Separately decide whether to use a toolkit by default.
1224 1996-06-04 Bill Mann <dvmann@dvhpux1.praxisint.com>
1226 * configure.in: If X11R5 is missing the Xaw headers,
1227 default to --with-x-toolkit=no.
1229 1996-05-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1231 * configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000.
1233 1996-05-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1235 * Makefile.in (install-arch-indep): If cd etc makes output,
1236 don't treat that as part of the tar data.
1237 Check that ./lisp actually exists.
1239 1996-05-29 Karl Heuer <kwzh@gnu.ai.mit.edu>
1241 * make-dist: Check for long file names.
1243 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1245 * Version 19.31 released.
1247 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1249 * configure.in: Recognize sparc-*-lignux.
1251 1996-05-03 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1253 * make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist.
1254 Don't include config.w95.
1256 1996-04-21 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1258 * make-dist: Replace --no-clean-up and --no-tar options
1259 with --clean-up and --tar, so that the default is useful.
1261 1996-04-15 Eli Zaretskii <eliz@is.elta.co.il>
1263 * config.bat: Make sure the GDB init file is called src/_gdbinit;
1264 if not, tell the user to rename it and abort.
1266 1996-04-14 Eli Zaretskii <eliz@is.elta.co.il>
1268 * config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE
1271 1996-04-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1273 * config.bat (djgpp_ver): Variable renamed from djgpp-ver.
1275 * make-dist (MANIFEST): Fix previous change.
1276 (msdos): Put mainmake.v2 into the dist.
1278 1996-04-10 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1280 * make-dist: Exit if autoconf fails.
1282 1996-04-10 Eli Zaretskii <eliz@is.elta.co.il>
1284 * config.bat: Set djgpp-ver, and unset it at the end.
1285 Add a number ofconditionals for DJGPP version 2.
1286 Rename label libsrc2 to libsrc3.
1287 Substitute for LDFLAGS in src/Makefile.
1288 Substitute for ALL_CFLAGS in lib-src/Makefile.
1290 1996-04-08 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1292 * configure.in (ncurses): Check this after checking fns like strerror.
1294 1996-04-08 Erik Naggum <erik@naggum.no>
1296 * make-dist (MANIFEST): Don't include lines from =files.
1298 1996-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1300 * make-dist: Don't put lisp/dired.todo in the dist.
1302 1996-04-05 Richard Stallman <rms@lucy.gnu.ai.mit.edu>
1304 * configure.in (HAVE_NCURSES): Look for library named ncurses.
1306 * configure.in (setlocale): Check for it.
1308 * configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp.
1310 1996-03-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1312 * configure.in: Use lignux instead of linux as value of opsys.
1314 1996-03-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1316 * Makefile.in (install-strip): Fix whitespace.
1317 Get rid of continuation.
1319 * config.sub: Convert linux or gnu/linux to lignux.
1321 1996-03-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1323 * configure.in: Accept lignux in configuration name.
1325 1996-03-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1327 * Makefile.in (install-strip): New target.
1329 1996-03-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1331 * Makefile.in (top_distclean): Use `|| true' to ignore error in rm.
1332 -f failed to do the job on Suns.
1334 1996-03-13 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1336 * Makefile.in (install-arch-dep): Don't depend on install-arch-indep.
1338 * configure.in (linux/version.h): Check for this header.
1340 1996-03-12 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1342 * configure.in: Remove -fno-builtin hackery from -lm check.
1344 1996-03-08 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1346 * configure.in (-lm check): If $GCC, append -fno-builtin to $CC for
1349 * configure.in (AC_PREREQ): Require version 2.8 of Autoconf.
1351 1996-03-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1353 * configure.in: Check for ncurses.
1355 1996-02-28 Paul Eggert <eggert@twinsun.com>
1357 * configure.in (LOCALTIME_CACHE):
1358 Also define if localtime mishandles unsetting TZ.
1359 This works around a localtime bug in mips-dec-ultrix.
1361 1996-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1363 * make-dist (finder-inf.el): Use finder-compile-keywords-make-dist.
1365 * configure.in: Improve messages about X versions.
1367 1996-02-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1369 * configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null.
1371 1996-02-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1373 * configure.in (HAVE_X11XTR6): Set it as a shell variable.
1374 (HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE.
1376 * Makefile.in (install-arch-dep): Depend on install-arch-indep.
1377 (install): Put install-arch-indep before install-arch-dep.
1379 1996-02-20 Dave Love <d.love@dl.ac.uk>
1381 * INSTALL: Clarify info about MS-DOS path handling.
1383 1996-02-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1385 * Makefile.in (install-arch-indep): Install info/ccmode*.
1386 In previous change, protect against /bin/pwd returning null string.
1388 1996-02-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1390 * Makefile.in (install-arch-indep): Copy build-dir's lisp subdir
1393 1996-02-01 Paul Eggert <eggert@twinsun.com>
1395 * configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar.
1397 1996-01-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1399 * configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails.
1401 1996-01-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1403 * Makefile.in (extraclean): Use ${top_distclean} to ensure
1404 we delete everything distclean deletes.
1406 1996-01-23 Karl Heuer <kwzh@gnu.ai.mit.edu>
1408 * make-dist (lwlib): Don't distribute lwlib-Xol* files.
1410 1996-01-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1412 * configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE
1413 into LDFLAGS instead of into LIBS.
1415 1996-01-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1417 * configure.in (HAVE_XMU): Fix typo in previous change.
1419 1996-01-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1421 * configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc.
1423 1996-01-10 Erik Naggum <erik@naggum.no>
1425 * configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'.
1427 1996-01-10 Karl Heuer <kwzh@gnu.ai.mit.edu>
1429 * Makefile.in (install-arch-indep): Ignore error if no chmod -R.
1431 1996-01-10 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1433 * configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit
1434 and use -lXt to link it.
1436 1996-01-08 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1438 * configure.in (locallisppath): Put version-specific dir first.
1440 1996-01-07 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1442 * configure.in (hppa-*-nextstep*): New alternative.
1443 (USE_X_TOOLKIT): By default, set this to "maybe";
1444 and change that later to LUCID or "no" according to X11 version.
1446 * make-dist: Recompile outdated .elc files and update all autoloads.
1448 1996-01-05 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
1450 * configure.in (locallisppath): Fix typo in last change: " -> '.
1452 1996-01-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1454 * configure.in (locallisppath): Add ../emacs/VERSION/site-lisp.
1456 1995-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1458 * Makefile.in (install-arch-indep): Give all files read permission.
1460 1995-12-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1462 * configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*):
1463 If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5.
1465 1995-12-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1467 * configure.in: Determine HAVE_X11R6.
1468 (HAVE_MENUS): Renamed from HAVE_X_MENU.
1470 1995-12-21 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1472 * configure.in: Just "solaris" now defaults to version 2.4.
1473 Add sunos4.1.n-noshare as alternative.
1475 1995-12-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1477 * configure.in (mips-sgi-irix6*): Set NON_GNU_CPP.
1479 1995-11-29 Erik Naggum <erik@naggum.no>
1481 * Makefile.in (install-arch-indep): Add missing backslash.
1483 1995-11-29 Karl Eichwalder <ke@ke.Central.DE>
1485 * Makefile.in (install-arch-indep): Don't install
1486 lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo.
1488 1995-11-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1490 * Makefile.in (install-arch-indep): Fix previous change.
1492 * configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*.
1494 1995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1496 * Version 19.30 released.
1498 * make-dist (lisp): Exclude subdirs.el.
1500 1995-11-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1502 * make-dist (etc): Delete *.orig and *.rej.
1504 1995-11-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1506 * Makefile.in (install-arch-indep): Rename old info/dir only if exists.
1508 1995-11-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1510 * configure.in (hppa*-hp-hpux10*): Use s/hpux10.h.
1512 1995-11-14 Geoff Voelker <voelker@cs.washington.edu>
1514 * make-dist (nt): Rename install, readme, and todo to
1515 INSTALL, README, and TODO.
1517 1995-11-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1519 * make-dist (lisp): Don't distribute site-start.
1521 1995-11-06 Karl Heuer <kwzh@gnu.ai.mit.edu>
1523 * make-dist: Break the hard link on alloca.c.
1525 1995-11-04 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1527 * configure.in (LIBS): Add libsrc_libs and keep the old LIBS.
1529 1995-11-02 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1531 * make-dist (src, lib-src): Don't distribute Makefile.c.
1532 (etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc.
1534 1995-10-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1536 * Makefile.in (mkdir): Create man1dir, not mandir.
1537 (uninstall): Use man1dir, not mandir.
1539 1995-10-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1541 * Makefile.in (man1dir): New variable.
1542 (install-arch-indep): Use man1dir.
1544 * configure.in (sparc-*-nextstep*): Remove incorrect .h's.
1546 * make-dist: Create lisp/MANIFEST.
1548 1995-10-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1550 * configure.in (m68k-*-linux*): New alternative.
1552 1995-10-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1554 * make-dist: Use new names config.in, paths.in, and
1555 {src,lib-src}/Makefile.in.
1557 1995-10-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1559 * configure.in: Don't bother checking for drem.
1561 1995-10-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1563 * Makefile.in (distclean): Delete line with just a tab in it.
1564 (install-arch-indep): Delete spaces that precede tabs.
1565 Delete spurious `fi' left from previous change.
1566 (install): Supply `true' as command, to avoid null command.
1568 1995-10-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1570 * configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'.
1572 1995-09-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1574 * configure.in (powerpc-*-solaris2): New alternative.x
1576 1995-09-12 Karl Heuer <kwzh@gnu.ai.mit.edu>
1578 * Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead
1579 of paths.h.tmp$$, to avoid going beyond 14 characters.
1581 1995-09-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1583 * configure.in: Improve error msg for invalid --with-x-toolkit value.
1585 1995-09-06 Paul Eggert <eggert@twinsun.com>
1587 * configure.in (LOCALTIME_CACHE): Define if tzset exists and
1588 if localtime caches TZ. Check for tzset.
1590 1995-09-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1592 * config.bat: Simplify using new names file names src/makefile.in,
1593 config.in, paths.in. Change Echo commands not to use `.
1595 1995-08-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1597 * Makefile.in (install-arch-indep): Always install the new dir file;
1598 rename the previous dir file to dir.bak or dir.old.
1600 1995-08-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1602 * configure.in (RANLIB): Substitute this into makefiles.
1603 Set it specially on solaris; set it by default on other systems.
1605 * configure.in: Fix previous Alpha change.
1607 1995-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1609 * configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and
1610 NON_GCC_TEST_OPTIONS.
1612 1995-08-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1614 * configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS
1615 from config.h, use SPECIFIED_CFLAGS to get what the user specified.
1617 * configure.in (alpha-*-linux*): New configuration.
1619 1995-08-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1621 * configure.in (m68*-next-*): Use m68k.h and nextstep.h.
1622 (m68k-next-nextstep*): New alias for that.
1623 (i*86-*-nextstep*): Use nextstep.h.
1624 (sparc-*-nextstep*): New configuration.
1626 1995-08-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1628 * configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS.
1629 And get CFLAGS from config.h if SPECIFIED_CFLAGS is null.
1631 1995-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1633 * configure.in: Handle sunos4shr by sharing; not like sunos4*.
1634 Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment.
1636 1995-07-18 Mike Long <mike.long@analog.com>
1638 * make-dist: Fix update of finder-inf.el, and byte-compile it.
1640 1995-07-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1642 * Makefile.in (src/paths.h, paths-force):
1643 Rename src/paths.h.in to src/paths.in.
1644 (Makefile): Depend on src/Makefile.in, not src/Makefile.in.in.
1646 * configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in.
1647 Use Makefile.c for intermediate file.
1648 Rename src/config.h.in to src/config.in.
1650 1995-07-17 Richard Stallman <rms@gnu.ai.mit.edu>
1652 * configure.in (mips-dec-ultrix*): Assume version 4.3.
1653 (mips-dec-ultrix4.[12]): New alternative for old versions.
1655 1995-07-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1657 * make-dist: Don't break intra-tree links.
1659 1995-07-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
1661 * configure.in: Put back archlibdir initialization. Require
1662 autoconf 2.4.1 or later.
1664 1995-07-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1666 * configure.in: Use sunos4shr normally for Sunos 4.1.[3-9].
1667 (mips-mips-riscos5*): New alternative.
1669 1995-06-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1671 * Makefile.in (uninstall, install-arch-indep): Install info/ediff*.
1673 1995-06-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1675 * configure.in (bindir, datadir, sharedstatedir, libexecdir)
1676 (mandir, infodir, archlibdir): Initializations deleted.
1678 * configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4.
1679 On hpux9shr, use hpux9shxr4.h.
1681 1995-06-24 Morten Welinder <terra+@cs.cmu.edu>
1683 * configure.in: Added target mips-dec-mach_bsd4.3.
1684 * config.guess: Guess mips-dec-mach_bsd4.3.
1686 1995-06-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1688 * Makefile.in (mkdir): Use symbolic chmod.
1690 1995-06-22 Paul Eggert <eggert@twinsun.com>
1692 * configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3.
1693 (Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.)
1695 1995-06-22 Paul Eggert <eggert@twinsun.com>
1697 * Makefile.in (SUBDIR_MAKEFILES):
1698 Add man/Makefile, so `make distclean' removes it.
1699 (top_distclean): Add config.log to the list of files to be removed.
1701 1995-06-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1703 * Version 19.29 released.
1705 1995-06-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1707 * configure.in: Fix the previous change to verify that the -b
1708 option really solves the problem.
1710 * make-dist (nt): Explicitly include makefile.nt and makefile.def only.
1712 1995-06-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1714 * configure.in: Test whether XFree86 needs -b i486-linuxaout to link.
1716 1995-06-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1718 * configure.in: Report more clearly when there is no special
1719 dir to search for X includes or libraries.
1721 1995-06-13 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1723 * configure.in: Check for -lpthreads, not -lpthread.
1725 1995-06-09 Geoff Voelker <voelker@cs.washington.edu>
1727 * make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in.
1729 1995-06-08 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1731 * configure.in: Check for -lpthread.
1733 1995-06-05 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1735 * Makefile.in (install-arch-indep): Install info files for mh-e.
1736 (uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc.
1738 1995-06-01 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1740 * configure.in (*-solaris2.5): New configuration.
1742 * make-dist: Copy new files config.nt and config.w95.
1744 1995-05-30 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1746 * configure.in: Use x_includes, not x_libraries, for -I.
1747 Make bitmapdir a colon-separated list.
1749 1995-05-27 Richard Stallman <rms@gnu.ai.mit.edu>
1751 * configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations.
1753 * configure.in: Allow x_libraries and x_includes to be paths.
1755 1995-05-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1757 * configure.in: Fix typo.
1759 1995-05-24 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
1761 * INSTALL: Clarify use of site-init.el.
1763 1995-05-22 enami tsugutomo <enami@sys.ptg.sony.co.jp>
1765 * configure.in: pass arg to sqrt.
1767 1995-05-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
1769 * make-dist: Fix May 6 change.
1771 1995-05-17 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1773 * vpath.sed: Delete reference to ymakefile.
1775 1995-05-09 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
1777 * configure.in: Use sqrt (more portable) instead of fmod in -lm
1780 1995-05-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1782 * make-dist: Put nt/emacs.ico and nt/emacs.rc in dist.
1784 * update-subdirs: Specify /bin/sh to run the script.
1786 1995-05-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1788 * make-dist: Put src/makefile.nt in dist.
1790 * configure.in (i[345]86-*-bsdi2*): New configuration.
1791 (vax-dec-bsd386*): Deleted.
1793 1995-05-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
1795 * configure.in: Make sure CDPATH doesn't mess up PWD check. Check
1796 whether X bitmaps are in X11/bitmaps instead of bitmaps. Use fmod
1797 instead of logb in -lm check.
1799 1995-05-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1801 * configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
1802 Use bsd4-3. Don't set NON_GNU_CPP.
1804 * make-dist: Don't copy in src/s/*.inp. Don't copy nt/src.
1805 In nt. copy various different things, but not *.cmd.
1806 Fix the ln commands for the subdirs of nt.
1808 1995-04-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1810 * configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h.
1812 1995-04-27 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1814 * configure.in (*-sun-sunos4.1.3*): Use shared libraries,
1815 since that's what the header file expects.
1817 1995-04-24 Francesco Potorti` (pot@cnuce.cnr.it)
1819 * configure.in (m68k-motorola-sysv*): Distinguish between 68030
1820 and 68040 based machines when choosing options for gnucc.
1822 1995-04-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1824 * Makefile.in (top_distclean): Delete config.cache.
1826 1995-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1828 * Makefile.in (install-arch-indep): Delete .#* when copying subdirs.
1830 * configure.in: Use m/ncr386.h.
1832 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1834 * Makefile.in (install-arch-indep): Undo Sep 23 change.
1836 1995-04-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1838 * make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore.
1839 (man): Don't copy texindex.c and getopt.c; they're deleted.
1840 (etc): Omit `e'; it's a subdirectory.
1841 (etc/e): Use `../..', not `..', to reference top level.
1843 1995-04-06 Simon Leinen <simon@lia.di.epfl.ch>
1845 * Makefile.in (install-arch-indep, dist):
1846 look for `update-subdir' in $(srcdir).
1848 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1850 * make-dist: Include mkinstalldirs in distribution.
1852 1995-04-05 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
1854 * make-dist: Add missing close backquote.
1856 1995-04-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1858 * make-dist: Don't distribute shortnames directory.
1860 1995-03-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1862 * Makefile.in (blessmail): Pass archlibdir to the sub-make.
1864 1995-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1866 * configure.in (m88k-motorola-sysv4*): Use usg5-4-2.
1868 1995-02-23 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1870 * configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args.
1872 1995-02-13 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
1874 * configure.in (mips-sgi-irix6): New configuration.
1876 1995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
1878 * Makefile.in (maintainer-clean): Renamed from realclean.
1880 1995-02-02 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
1882 * configure.in: Create a .gdbinit that sources the real one, if
1883 using a different build directory.
1885 1995-01-23 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
1887 * configure.in: Check for sys/select.h.
1889 1995-01-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1891 * configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP.
1893 1994-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1895 * configure.in: Handle isc 4.1 operating system.
1897 1994-12-10 Richard Stallman <rms@kepa>
1899 * configure.in (rs6000-ibm-aix4.1*): New alternative.
1900 (rs6000-ibm-aix4*): New alternative.
1902 1994-12-06 Richard Stallman <rms@kepa>
1904 * configure.in: For SVR4.2, set NON_GNU_CPP if not already set.
1906 1994-11-30 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
1908 * configure.in: Don't try to make directories that are guaranteed
1911 1994-11-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1913 * configure.in: Generate man/Makefile from man/Makefile.in.
1914 Create the man subdir.
1916 * Makefile.in (dvi): Run Make in our man subdir.
1918 * make-dist: Create subdir etc/e.
1920 Put man/Makefile.in in dist, instead of man/Makefile.
1922 1994-11-21 David J. MacKenzie (djm@mole.gnu.ai.mit.edu)
1924 * configure.in: Add --with-pop, --with-kerberos, and
1925 --with-hesiod for movemail.
1927 1994-11-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1929 * configure.in (m68*-apollo*): Use s/domain.h.
1931 1994-11-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1933 * configure.in (m68*-apollo*): Set NON_GNU_CPP.
1935 1994-11-14 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
1937 * configure.in: Don't add -I, -L, -R options for cc if their
1938 arguments would be empty.
1940 1994-11-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1942 * configure.in (i860-intel-osf1*): New alternative.
1943 (mips-sgi-irix5.[01]*): Distinguish from irix5*.
1944 (mips-sgi-irix*): Now an alias for mips-sgi-irix5*.
1946 1994-11-09 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
1948 * configure.in: Make h_errno check not use nested functions.
1950 1994-11-09 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
1952 * Makefile.in (install-arch-indep): Delete *.orig in copied dirs.
1954 1994-11-08 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
1956 * Makefile.in (install-arch-indep): Avoid continued comment
1957 swallowing target line.
1959 1994-11-08 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu)
1961 * configure.in: Protect a character class with `changequote'.
1963 1994-11-07 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1965 * configure.in: Accept `news' as a synonym for `newsos'.
1967 1994-11-03 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
1969 * Makefile.in: Don't rm files if cd fails.
1971 1994-11-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1973 * make-dist: Put nt subdir and its subdirs in the dist.
1974 (lib-src): Put makefile.nt in the dist.
1975 (lisp): Put makefile.nt in the dist.
1977 1994-10-29 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
1979 * configure.in: Change a stray `[' to `test'.
1981 1994-10-28 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
1983 * configure.in: Adapt for Autoconf v2. Use the standard argument
1984 parser, host type canonicalizer, X11 finder, and message
1985 printing macros. Use the new macro names. Use `test' instead of `['.
1987 1994-10-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1989 * configure.in: Check for getpagesize.
1991 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1993 * make-dist (msdos): Put sed* in the distribution.
1995 1994-10-17 Morten Welinder <terra@mole.gnu.ai.mit.edu>
1997 * config.bat: New option, `--with-x', for configuring Emacs
1998 for use with the X11 system DesqView/X.
1999 New option, `--no-debug', for compiling Emacs without debug
2000 information thus saving disk space.
2001 (src/config.h, src/paths.h): Use `update' (which is like
2002 `move-if-changed') to change the file.
2003 (src/config.h): When configuring for X11 perform extra changes.
2004 (src/makefile): When configuring for X11 perform extra changes.
2005 (lib-src): Remove temporary files.
2006 (): Check that `sed', `rm', `mv', and `gcc' are available.
2008 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2010 * Makefile.in (sharedstatedir): Substitute sharedstatedir properly.
2012 * configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps.
2014 1994-10-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2016 * configure.in (EMACS_CONFIGURATION): Use $canonical as value.
2018 * configure.in (canonical): Substitute var into makefiles.
2019 (bitmapdir): Likewise.
2021 * Makefile.in (bitmapdir): New variable.
2022 (src/paths.h, paths-force): Edit PATH_BITMAPS.
2024 1994-10-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2026 * make-dist: Put update-subdirs and lisp/subdirs.el in the dist.
2028 * Makefile.in (dist, install-arch-indep): Run update-subdirs.
2029 * update-subdirs: New shell script.
2031 1994-10-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2033 * Makefile.in (top_distclean): Don't rm build-install.
2034 (SOURCES): Delete build-install.in.
2036 * make-dist: Don't distribute build-ins.in.
2037 * build-ins.in: File deleted.
2039 1994-10-12 David J. MacKenzie (djm@duality.gnu.ai.mit.edu)
2041 * Makefile.in (mkdir): Use mkinstalldirs instead of make-path.
2043 1994-10-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2045 * Makefile.in: Use libexecdir and sharedstatedir as appropriate.
2047 * configure.in (libexecdir): Renamed from libdir. New default.
2048 (sharedstatedir): Renamed from statedir. New default.
2049 (datadir): New default.
2051 * make-dist: Don't distribute subdirs.el.
2053 1994-10-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2055 * configure.in (eaccess): Check for it.
2057 1994-10-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2059 * configure.in (mktime): Check for it.
2061 1994-10-02 Paul Reilly <pmr@geech.gnu.ai.mit.edu>
2063 * configure.in (motif): Add support for usage and option checking.
2065 1994-09-24 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2067 * configure.in (utimes): Check for it.
2069 1994-09-23 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2071 * Makefile.in (install-arch-indep): Don't do mkdir here.
2073 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2075 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2076 riscix.h renamed to acorn.h.
2078 1994-09-21 Michael Ben-Gershon (mybg@cs.huji.ac.il)
2080 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2083 1994-09-21 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2085 * configure.in: Remove trailing slashes from srcdir.
2087 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2089 * configure.in (i[345]86-sequent-ptx*): Handle
2091 1994-09-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2093 * Makefile.in (paths-force): Depend on src/paths.h
2095 1994-09-19 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2097 * configure.in (config_options): Save all arguments, not just some.
2099 1994-09-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2101 * Makefile.in (install-arch-indep): Copy DOC-*, not DOC*
2103 * configure.in: Add AC_AIX.
2104 Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT.
2106 1994-09-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2108 * configure.in (parsing options): Simplify sed command to delete -'s.
2110 1994-09-16 Karl Heuer <kwzh@churchy.gnu.ai.mit.edu>
2112 * configure.in (config_options): New shell variable.
2113 Pass its value to C code in EMACS_CONFIG_OPTIONS.
2115 1994-09-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2117 * configure.in (alpha-dec-osf*): New target.
2119 * Makefile.in: Use just one FRC target.
2121 1994-09-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2123 * Makefile.in (removenullpaths, paths-force):
2124 Use name paths.h.tmp$$, which depends on the pid.
2126 1994-09-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2128 * Makefile.in (removenullpaths, paths-force):
2129 Put paths.h.tmp in top-level dir, not in src.
2131 1994-09-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2133 * Version 19.27 released.
2135 1994-09-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2137 * Version 19.26 released.
2139 1994-09-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2141 * configure.in: Check for lrand48, not rand48.
2143 1994-09-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2145 * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5)
2146 (powerpc-ibm-aix*): New aliases.
2148 1994-08-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2150 * make-dist (src/m, src/s): Put *.inp in distribution.
2152 1994-08-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2154 * configure.in: Accept i586 and i486 along with i386.
2156 1994-08-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2158 * configure.in: Do compute unexec, LIBX, system_malloc, etc
2159 even if CPP env var was set by the user.
2161 * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value.
2163 1994-08-14 Jonathan I. Kamens (jik@gza-client1.aktis.com)
2165 * Makefile.in: Uninstall "$(EMACS)", not "emacs".
2167 1994-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2169 * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP.
2171 1994-08-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2173 * configure.in: Check more specifically for i*86-sun-sunos.
2175 1994-08-03 Caveh Jalali (caveh@eng.sun.com)
2177 * configure.in: Handle solaris 2.4.
2179 1994-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2181 * configure.in (rand48): Check for it.
2183 1994-07-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2185 * make-dist: Update the info files.
2187 1994-07-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2189 * configure.in: Make "checking..." messages' style consistent.
2190 (HAVE_H_ERRNO): New test.
2192 1994-07-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2194 * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP.
2196 1994-07-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2198 * configure.in (CFLAGS): If the envvar was specified, use that.
2199 And set REAL_CFLAGS from it too.
2201 1994-07-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2203 * make-dist: Update finder-inf.el.
2205 1994-07-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2207 * make-dist (msdos): Include sed4.inp in dist.
2209 * Makefile.in (libsrc_libs): Var deleted.
2211 1994-07-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2213 * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands.
2215 1994-06-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2217 * configure.in (mips-sony-newsos4*): New alias.
2219 1994-06-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2221 * configure.in (*-convex-bsd*): Set NON_GNU_CPP.
2222 (*-convex-convexos*): Accept this as alias.
2224 1994-06-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2226 * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE,
2227 for two different uses.
2229 1994-06-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2231 * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc.
2233 1994-06-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2235 * make-dist: Put ./BUGS into the distrib.
2237 1994-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2239 * configure.in: Handle 386 running Solaris 2.
2241 1994-06-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2243 * configure.in (mips-siemens-sysv*): Use cpp, not cc -E.
2245 1994-06-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2247 * configure.in (mips-sony-newsos*): Use news-risc.h.
2249 * configure.in: Accept bsdi as opsys, like bsd386.
2251 1994-06-01 Morten Welinder (terra@diku.dk)
2253 * config.bat (src/paths.h): Use sed script msdos/sed4.inp.
2255 1994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2257 * Version 19.25 released.
2259 * make-dist (shortversion): Don't assume another period follows.
2261 1994-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2263 * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd.
2264 (uninstall): Use /bin/pwd.
2266 * Makefile.in (blessmail): Depend on src.
2267 (all): Don't depend on blessmail.
2269 * Makefile.in (src/paths.h): Don't force recomputation.
2270 (paths-force): New target; force recomputation of paths.h.
2271 (all): Depend on paths-force.
2272 (src, lib-src): Depend on src/paths.h.
2274 * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS,
2275 NON_GCC_TEST_OPTIONS.
2277 1994-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2279 * configure.in: Don't insist on subversions for irix.
2281 1994-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2283 * configure.in (hppa*-hp-hpux9shr): Move alternative up.
2285 * configure.in (i[34]86-next-*): New alternative.
2287 1994-05-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2289 * Version 19.24 released.
2291 * configure.in: New config hppa*-hp-hpux9shr*.
2293 1994-05-22 Morten Welinder (terra@tyr.diku.dk)
2295 * config.bat: Doc fix.
2297 1994-05-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2299 * Makefile.in (mostlyclean, clean, distclean, realclean)
2300 (extraclean): Don't act on man subdir if it doesn't exist.
2302 1994-05-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2304 * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars.
2305 Use them to set up CC.
2306 (*-sun-sunos4.1.3): Set them.
2308 1994-05-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2310 * Makefile.in (lib-src): Don't depend on src/paths.h.
2312 1994-05-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2314 * build-ins.in (copydests): Get rid of spurious `-'s.
2316 * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION.
2318 1994-05-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2320 * Version 19.23 released.
2322 * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS
2323 for the Xlib and Xt checks; then restore old CFLAGS.
2325 1994-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2327 * configure.in (HAVE_X11XTR6): Add newline before #if.
2328 Add newline after #endif.
2330 1994-05-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2332 * configure.in (HAVE_X11XTR6): Arrange to define it.
2334 1994-05-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2336 * Makefile.in (install): Depend on blessmail.
2338 1994-05-12 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2340 * configure.in (mips-siemens-sysv*): Put quotes around value
2343 1994-05-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2345 * Makefile.in (TAGS): Use the makefile in src subdir.
2347 1994-05-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2349 * configure.in (opsys): Recognize `gnu'.
2351 1994-05-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2353 * configure.in (using NON_GNU_CPP): Fix test for CPP already set.
2355 1994-05-09 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2357 * configure.in: Remove AC_LANG_C call. Not needed with Autoconf
2360 1994-05-08 Morten Welinder (terra@diku.dk)
2362 * config.bat: Forcibly remove "# " style comments from makefiles.
2364 1994-05-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2366 * Makefile.in (uninstall): When processing lispdir and etcdir,
2367 do nothing unless it exists and is a directory.
2369 1994-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2371 * Makefile.in (install-arch-indep): Do install info/dired-x*.
2372 Merge code in from install-doc.
2373 (install-doc): Merge code back into install-arch-indep.
2374 (install-arch-dep): Don't depend on install-doc.
2376 * configure.in (run_in_place): Don't use pwd for archlibdir and docdir.
2378 1994-05-04 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2380 * configure.in (making src/Makefile and lib-src/Makefile):
2381 Split off the autoconf substitutions and don't pass them thru cpp.
2382 (undefs): Use $canonical as well as $configuration.
2384 * make-dist: Distribute lisp/Makefile.
2386 * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*.
2387 Use lower case names for the s files.
2389 1994-05-03 Morten Welinder (terra@diku.dk)
2391 * config.bat: Added possibility for different file name
2392 transscriptions in lib-src.
2394 1994-05-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2396 * Makefile.in (lib-src): Undo previous change.
2397 (blessmail): New target to run maybe-blessmail in lib-src.
2398 (all): Depend on blessmail.
2400 * Makefile.in (lib-src): Depend on src.
2402 1994-04-30 Paul Reilly (pmr@churchy.gnu.ai.mit.edu)
2404 * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3.
2405 (m88k-dg-dgux5.4R2): dgux5.4R2.
2407 1994-04-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2409 * configure.in (window_system): Restore accidentally deleted code
2410 that uses AC_FIND_X.
2412 * make-dist: Distribute config.bat.
2414 1994-04-29 Morten Welinder (terra@diku.dk)
2416 * config.bat: Corrected the configuration of lib-src
2417 to keep up with configure. Add note about dos version 3
2418 or better needed (djgpp needs that). Add note explaining
2419 that either install in c:/emacs or edit the script.
2420 Don't change to c:/emacs, but assume we're there (to minimize
2421 the number of places to change).
2423 * config.bat: Build-in the first step towards X11 support with
2424 the X11 emulator that exists. At this time it won't work,
2425 and several files are missing.
2427 1994-04-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2429 * configure.in: Use m/hp800.h in place of m/hp9000s800.h.
2430 Don't look for -lresolv.
2432 * Makefile.in (lib-src): Depend on src/paths.h.
2434 1994-04-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2436 * configure.in: Restore deleted AC_SUBST of `configuration'.
2437 Improve error message for bad --with-x-toolkit value.
2439 * configure.in: Define CONFIGURATION in src/config.h
2440 rather than substituting in src/Makefile.in.
2442 1994-04-26 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2444 * Makefile.in (install-doc): New target.
2445 (install-arch-dep): Depend on install-doc.
2446 (mkdir): Create docdir.
2448 1994-04-22 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2450 * configure.in: Test for libresolv.a.
2451 Substitute machfile and opsysfile.
2453 1994-04-22 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2455 * Makefile.in (.PHONY, install): Kill reference to obsolete do-install.
2456 (install-arch-dep): Install under the name $(EMACS).
2458 1994-04-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2460 * configure.in (version): Use entire value of emacs-version.
2461 (mips-siemens-sysv*): New alternative.
2463 1994-04-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2465 * Makefile.in (install-arch-indep): Don't install dired-x*.
2467 1994-04-18 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2469 * configure.in (src/Makefile, lib-src/Makefile): Delete ^L.
2470 Fix definition of $undefs.
2472 1994-04-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2474 * configure.in (window_system): Obey --with-x11=no and --with-x10=no.
2476 * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I.
2478 1994-04-16 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2480 * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE.
2482 1994-04-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2484 * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in
2485 and run it thru cpp, as with src/Makefile.in.
2487 * configure.in: Use AC_SET_MAKE.
2489 1994-04-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2491 * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2.
2493 1994-04-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2495 * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@.
2497 * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes.
2498 (printing the choices): Make the toolkit message unconditional.
2499 (USE_X_TOOLKIT): Use `none', not `no', if none.
2500 (include libsrc_libs): Include config.h, and specify -I for srcdir.
2501 Get rid of temp file foofoo1.
2503 1994-04-13 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2505 * configure.in (CFLAGS): Use shell syntax, not Makefile.
2507 1994-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2509 * configure.in (window_system): If no X, set USE_X_TOOLKIT=no.
2510 (printing the choices): State choice of toolkit.
2511 (libsrc_libs): Recalculate after writing config.h;
2512 then update lib-src/Makefile.
2514 1994-04-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2516 * configure.in: Add sunos4shr as alternative for suns.
2517 Conditionals testing for null $CC were backwards.
2519 1994-04-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2521 * make-dist (msdos): Don't link patch1. Link sed*.inp, not sed.in*.
2523 1994-04-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2525 * configure.in: Handle -isc4.0*.
2527 1994-03-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2529 * configure.in (esix5): Set NON_GNU_CPP.
2531 1994-03-24 Roland McGrath (roland@mole.gnu.ai.mit.edu)
2533 * Makefile.in (thisdir): Nonsensical variable removed.
2534 (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd
2535 back to $thisdir, rather than the directory `this_dir'.
2537 1994-03-17 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2539 * Makefile.in (install-arch-indep): Add missing backslash after a
2542 1994-03-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2544 * Makefile.in (thisdir): New variable.
2545 (install-arch-indep): Go back to thisdir to run INSTALL_DATA.
2547 1994-03-08 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2549 * configure.in: Add freebsd.
2551 1994-03-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2553 * configure.in: Check for fpathconf.
2555 1994-03-02 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2557 * configure.in (with_x_toolkit): Fix typo in previous change.
2559 1994-03-01 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2561 * configure.in: New s-file for rs60000-ibm-aix3.2.5.
2563 1994-02-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2565 * configure.in (with_x_toolkit): Don't allow motif or open-look.
2567 1994-02-24 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2569 * configure.in: Fix value of docdir.
2570 * Makefile.in (install-arch-indep): Install DOC* in docdir.
2572 1994-02-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2574 * configure.in (*-sysv4.1): Set NON_GNU_CPP.
2576 1994-02-22 Karl Heuer (kwzh@geech.gnu.ai.mit.edu)
2578 * configure.in: New variable docdir to control where the docstring
2580 Makefile.in: Use it to initialize PATH_DOC in paths.h.
2582 1994-02-22 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2584 * configure.in: When --run-in-place, don't inherit archlibdir.
2586 1994-02-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2588 * Makefile.in (install-arch-dep, install-arch-indep):
2589 New targets split up former do-install rule.
2590 (do-install): Target deleted.
2592 1994-02-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2594 * configure.in (mips-sony-newsos*): New configuration.
2596 1994-02-14 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu)
2598 * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
2600 1994-02-11 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2602 * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX.
2604 1994-02-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2606 * configure.in: Don't initialize CC.
2608 1994-02-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2610 * configure.in (creating src/Makefile): Also generate -U switches
2611 for symbols in the $configuration value.
2613 * configure.in: Check for sys_siglist being declared in system header.
2615 1994-02-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2617 * configure.in (creating src/Makefile): Delete blank lines
2618 along with lines of whitespace.
2619 (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value.
2621 1994-02-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2623 * configure.in: Get, use, and substitute C_SWITCH_MACHINE
2624 like C_SWITCH_SYSTEM.
2625 (m68*-motorola-sysv*): Set CC. Require cpu type to be m68k or m68000.
2627 1994-02-04 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2629 * configure.in (drem): Check for this function.
2631 1994-02-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2633 * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces.
2634 If CPP was inherited from environment, don't use NON_GNU_CPP.
2635 (NON_GNU_CC): Likewise.
2636 (handling with_gcc): Use explicit if in the `no' case.
2637 (cc_specified): New variable; if set, don't use NON_GNU_CC.
2639 1994-02-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2641 * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP.
2643 1994-02-01 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
2645 * configure.in: Check whether fmod exists.
2647 1994-01-31 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2649 * make-dist: Distribute {src,lisp}/ChangeLog.? instead of
2650 {src,lisp}/OChangeLog.
2652 1994-01-22 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2654 * configure.in: Restore Jan 8 and Jan 16 changes. The -U hack is
2655 necessary for proper operation. This code works with the current
2656 released version of Autoconf.
2658 1994-01-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2660 * configure.in (with_x_toolkit): Treat values athena and lucid alike.
2661 (USE_X_TOOLKIT): Define it for all values except `no'.
2663 * configure.in: Undo first Jan 8 change and Jan 16 change.
2665 1994-01-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2667 * configure.in: Handle --with-x-toolkit. Produce lwlib/Makefile.
2668 Substitute USE_X_TOOLKIT as both C macro and Make variable.
2670 * Makefile.in (lwlib/Makefile): New target.
2671 (SUBDIR_MAKEFILES): Depend on lwlib/Makefile.
2672 (clean, mostlyclean, distclean, realclean): Handle lwlib subdir.
2673 (unlock, relock): Handle lwlib subdir.
2675 * Makefile.in: Add some .PHONY targets.
2677 * make-dist: Handle lwlib subdir like oldXMenu subdir.
2679 * lwlib: New subdirectory.
2681 1994-01-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2683 * configure.in: If CPP has a value that is a directory,
2686 1994-01-16 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2688 * configure.in (srcdir_undefs): Add g flag to sed substitution to
2691 1994-01-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2693 * Makefile.in (do-install): Install the dired-x info files.
2695 * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX.
2698 1994-01-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2700 * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs.
2702 1994-01-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2704 * configure.in (creating src/Makefile): Put code inside 2nd arg to
2705 AC_OUTPUT as it should be; hopefully noone will again see fit to
2706 gratuitously break this and not make a change log entry.
2707 Optimized sed processing of Makefile.in and cpp output; now
2708 preserves comments previously removed from the cpp input.
2709 Eliminated temp file for cpp output. Generate -U switches to
2710 undefine all identifiers that appear in the directory name
2711 ${srcdir}; pass these to cpp.
2713 * configure.in (version): Fix sed regexp to match two-elt version
2716 * configure.in: Check for strerror.
2718 1994-01-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2720 * configure.in: Test for bcmp.
2722 1994-01-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2724 * make-dist (tempdir): Put subdir msdos into the distribution.
2726 1993-01-07 Morten Welinder (terra@diku.dk)
2728 * config.bat: New file.
2730 1994-01-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2732 * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS.
2734 1994-01-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2736 * configure.in (m68*-next-*): Don't care about which os is specified.
2737 (i[34]86-*-*): Check for *-nextstop*.
2739 1993-12-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2741 * configure.in: Check for setsid.
2743 1993-12-17 Richard Stallman (rms@srarc2)
2745 * configure.in (*-sun-solaris*): Add special case for Solaris 2.3.
2747 1993-12-15 Richard Stallman (rms@srarc2)
2749 * Makefile.in (mkdir): Make only the lockdir writable.
2751 * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
2753 1993-12-11 Richard Stallman (rms@srarc2)
2755 * Makefile.in (libdir): Use @libdir@.
2757 1993-12-08 Richard Stallman (rms@srarc2)
2759 * Makefile.in (install): Add empty command.
2761 1993-12-04 Richard Stallman (rms@srarc2)
2763 * make-dist: Put man/getopt.c in the dist.
2765 * configure.in (LIBS): Add test for existence of XSetWMProtocols.
2767 * Makefile.in (install): Depend on ${SUBDIR}, not `all'.
2769 1993-12-03 Richard Stallman (rms@srarc2)
2771 * configure.in (solaris): Set NON_GNU_CPP instead of CPP.
2772 Set it for all solaris versions.
2773 (mips-mips-riscos4*): Set NON_GNU_CC, not CC.
2774 (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP.
2775 Likewise for NON_GNU_CC and CC.
2777 1993-12-01 Richard Stallman (rms@srarc2)
2779 * configure.in (mips-mips-riscos4*): Assign variable CC.
2780 (checking ${with_gcc}): If "no", don't override CC if already set.
2781 (CC): Initialize it as empty.
2783 1993-11-30 Richard Stallman (rms at srarc2)
2785 * configure.in (Suns): Set CPP if *-solaris2.3*.
2787 1993-11-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2789 * Version 19.22 released.
2791 * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs.
2793 1993-11-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2795 * make-dist: When breaking links, use cp -p.
2796 Copy install.sh into distribution.
2797 Move the temp dir up into the parent dir;
2798 don't leave the staging dir make-dist.tmp... in existence.
2799 * install.sh: New file.
2801 1993-11-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2803 * configure.in (i[34]86-ncr-sysv*): New specific alternative.
2805 1993-11-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2807 * configure.in (version): When --run-in-place, exclude
2808 ${datadir}/emacs/site-lisp from locallisppath.
2810 1993-11-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2812 * configure.in: Delete jumk.c before writing it.
2814 1993-11-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2816 * Version 19.21 released.
2818 * Makefile.in (mkdir): Ignore error from chmod.
2820 1993-11-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2822 * make-dist: Don't put lisp/forms.README in the distribution.
2824 1993-11-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2826 * configure.in (creating src/Makefile): Before running cpp,
2827 discard all lines that start with `# Generated' or /**/#.
2829 1993-11-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2831 * Version 19.20 released.
2833 * make-dist: Use build-ins.in, not build-install.in.
2834 Don't bother updating TAGS since it's not included.
2836 * build-ins.in: Renamed from build-install.in.
2838 1993-11-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2840 * make-dist: Don't try to link *.texinfo--there are none now.
2841 When running make in lib-src, specify YACC var value.
2843 1993-10-03 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2845 * configure.in (extrasub): Add vpath patterns for %.[yls].
2847 * configure.in: Don't do seddery on config.status after AC_OUTPUT.
2848 Instead just include the commands to make src/Makefile as the
2849 second arg to AC_OUTPUT.
2851 * configure.in: Use : instead of dnl for comment inside
2854 * configure.in: No longer use vpath_sed. Instead, when we notice
2855 srcdir already configured, set extrasub to hack vpath in the
2858 * configure.in: In cmds to make src/Makefile, chmod Makefile.new
2860 * Makefile.in (VPATH): Define to @srcdir@.
2862 1993-09-28 Brian Fox (bfox@cubit)
2864 * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
2865 doesn't exist. Just copy src/Makefile.in instead. Touch
2866 all of the Makefiles after editing config.status.
2868 * INSTALL: Update documentation to match new configuration
2871 1993-09-27 Brian Fox (bfox@ai.mit.edu)
2873 * configure.in: Allow any of the path or directory Makefile
2874 variables to be set with flags to configure. Create all Makefiles
2875 at configure time. Edit special commands into config.status after
2876 src/Makefile.in is built from src/Makefile.
2878 * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile):
2879 If these files are out of date, simply have config.status
2880 rebuild them; don't rebuild them explicitly.
2882 1993-09-25 Brian Fox (bfox@ai.mit.edu)
2884 * build-install.in: Change src/xemacs to src/emacs. We no longer
2885 create src/xemacs, so the file wouldn't be found.
2887 * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'.
2889 1993-09-24 Brian Fox (bfox@albert.gnu.ai.mit.edu)
2891 * configure.in: Avoid forcing the search of /usr/include before
2892 fixed include files by resetting C_SWITCH_X_SITE if it is
2895 1993-09-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2897 * Makefile.in (@rip_paths@locallisppath):
2898 Delete ${datadir}/emacs/site-lisp.
2900 1993-09-15 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2903 Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value.
2904 Remove ${extra_output} from AC_OUTPUT call.
2906 1993-09-17 Brian Fox (bfox@inferno)
2908 * make-dist: Quote backquotes found in strings to be echoed.
2910 * configure.in: Use "sh -c pwd" when we want to avoid having the
2911 shell fix up the value of $PWD.
2913 1993-09-13 Brian Fox (bfox@inferno)
2915 * Makefile.in (do-install): Don't abort if ln or chmod at the end
2916 of the installation fail. Suggested by Karl Berry.
2918 1993-08-30 Brian Fox (bfox@inferno)
2920 * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make"
2921 was used. Set MAKEFLAGS from MFLAGS.
2923 1993-09-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2925 * configure.in: Test for res_init in libc.
2927 1993-09-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2929 * configure.in: In the file ${tempcname}, use configure___
2930 instead of @configure@.
2932 1993-09-12 Roland McGrath (roland@sugar-bombs.gnu.ai.mit.edu)
2934 * make-dist: Dist vpath.sed
2936 * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile):
2937 Depend on vpath.sed.
2938 Replace sed comand for VPATH with @vpath_sed@.
2940 * configure.in: Substitute variable `vpath_sed'.
2941 If not in $srcdir and $srcdir is configured,
2942 issue warning that GNU make is required,
2943 and set vpath_sed to use vpath.sed script.
2945 1993-09-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2947 * configure.in: Remove check for $srcdir being configured. This
2948 pretty much works now.
2949 Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
2950 Check for XFree86 (/usr/X386/include) independent of whether
2953 * Makefile.in (info, dvi, clean, mostlyclean, distclean,
2954 realclean, unlock, relock): Use `$(MAKE)' in place of plain
2957 1993-08-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2959 * Version 19.19 released.
2961 * configure.in (i386-*-sunos4): Assume Sunos 4.0.
2963 1993-08-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2965 * configure.in: Check for XScreenNumberOfScreen.
2967 1993-08-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2969 * configure.in: Add * to end of all configuration alternatives.
2970 (m68*-sony-newsos3*): New alternative.
2972 1993-08-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2974 * make-dist: Include getdate.c in distribution.
2976 * configure.in: For --help, use $PAGER if it is set.
2977 (LIB_X11_LIB): Default to -lX11.
2978 (mips-sgi-irix5.*): New alternative.
2980 * Makefile.in (do-install): Install info/gnus* and info/sc*.
2982 * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*):
2983 Recognize *.B8.* as hpux version 8.
2984 (m68*-tektronix-bsd*): Fix typo in tek4300.
2985 (AC_HAVE_FUNCS): Add ftime.
2987 1993-08-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2989 * configure.in (m88k-tektronix-sysv3*): Added the missing *.
2990 Use tekxd88, not tekXD88.
2992 1993-08-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2994 * configure.in: Check for -lm. Then can check for frexp and logb.
2996 1993-08-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2998 * Version 19.18 released.
3000 * make-dist (src): Don't put gnu-hp300 in dist.
3001 (src, lisp): Include OChangeLog in dist.
3003 1993-08-08 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3005 * configure.in: Test for presence of logb and frexp functions.
3007 1993-08-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3009 * configure.in (machine): Add i370-ibm-aix*.
3011 1993-08-03 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3013 * configure.in (function checks): Test for mkdir and rmdir.
3015 * configure.in (function checks): Don't test for random and bcopy
3016 only when we're building with X; look for them all the time.
3018 1993-07-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3020 * configure.in: Test for availability of bcopy functions, searching
3021 the X libraries if we're using X.
3023 * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp,
3024 and #define HAVE_AIX_SMT_EXP if we do. This is present in some
3025 versions of AIX, and needs to be passed to the loader.
3027 * configure.in: Test for the availablility of the
3028 XScreenResourceString function.
3030 1993-07-30 David J. MacKenzie (djm@frob.eng.umd.edu)
3032 * configure.in: If we found X on our own, set C_SWITCH_X_SITE and
3033 LD_SWITCH_X_SITE and assume --with-x11.
3034 Only look for X11 files if we weren't told about a window system
3035 or if we were told to use X11 but not told where.
3036 Search the libraries from the s and/or m files when checking for
3039 * configure.in: Remove any trailing slashes in prefix and exec_prefix.
3041 1993-07-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3043 * make-dist: Include lisp/dired.todo in the distribution.
3045 1993-07-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3047 * configure.in: Add code to set HAVE_INET_SOCKETS.
3049 1993-07-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3051 * configure.in: If we do find x_includes and x_libraries
3052 via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE.
3054 1993-07-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3056 * make-dist: Include src/gnu-hp300 in the dist.
3058 * configure.in (canonical): New variable holds the canonicalized
3059 configuration. Don't alter `configuration'. Use `configuration'
3060 for Makefile.in for file naming.
3061 (testing x_includes and x_libraries): Use =, not ==.
3063 1993-07-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3065 * Version 19.17 released.
3067 * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src
3068 directory's makefile. This allows the invocation of CPP which
3069 builds xmakefile to receive these switches. The SunSoft C
3070 preprocessor inserts spaces between tokens if it doesn't get the
3071 -Xs flag requested in src/s/sol2.h.
3073 1993-07-12 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
3075 * configure.in (m68k-bull-sysv3): new config.
3077 1993-07-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3079 * configure.in: Use the autoconf AC_FIND_X macro to try to find
3080 the X Windows libraries.
3082 1993-07-07 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3084 * make-dist (tempdir): Don't create lisp/forms-mode directory in
3085 the distribution. Those files aren't kept in their own
3086 subdirectory any more.
3088 1993-07-06 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3090 * Version 19.16 released.
3092 1993-06-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3094 * configure.in: Add --verbose flag.
3096 1993-06-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3098 * version 19.15 released.
3100 1993-06-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3102 * Makefile.in (top_distclean): Use -f switch when cleaning out
3103 lock dir; it might be empty.
3105 * configure.in: Only check for -lXbsd once.
3107 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3109 * Version 19.14 released.
3111 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3113 * make-dist: If using gzip, create distribution with '.gz' extension.
3115 * make-dist (lisp/term): This doesn't have a ChangeLog anymore.
3116 (lisp/forms-mode): This doesn't exist anymore.
3118 * configure.in: Look for the closedir function.
3120 1993-06-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3122 * configure.in (CPP): Autoconf sets this to a shell variable
3123 reference, which doesn't work when it's edited into a makefile.
3124 Expand that variable reference.
3126 * Makefile.in (CPP): New variable.
3127 (src/Makefile): Edit CPP into src/Makefile.
3129 * Makefile.in (src/Makefile): Don't bother exiting single quotes
3130 and entering double quotes to get the values of LD_SWITCH_X_SITE
3131 and the other make variables; make substitutes them in anyway.
3133 * Makefile.in (uninstall): Don't remove the lisp and etc
3134 directories if they're in the source tree.
3136 Bring mumbleclean targets into conformance with GNU coding standards.
3137 * Makefile.in (mostlyclean, clean): Separate these two; just have
3138 them pass the request to the subdirectory makefiles.
3139 (distclean): Pass the request down, and then get rid of the
3140 files configure built, and get rid of the Makefiles.
3141 (realclean): Pass the request down, and then do the same things
3143 (uninstall, info, dvi): New targets.
3145 * configure.in: Move clause for PC-compatible i386 box to the end
3146 of the case statement, to avoid masking configurations below.
3148 * configure.in: Add case for m88k-motorola-sysv4.
3150 * configure.in: Add support for HP/UX versions 7, 8, and 9 on
3151 the HP 68000 machines.
3153 * configure.in: Put the arguments to LD_SWITCH_X_SITE's and
3154 C_SWITCH_X_SITE's -L and -I switches in quotes, so the
3155 preprocessor won't fiddle with them.
3157 1993-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3159 * Makefile.in (TAGS): cd to src to run etags.
3161 1993-06-12 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3163 * configure.in (version): Check the X libraries for XrmSetDatabase
3164 and random, and see if we have -lXbsd.
3166 1993-06-11 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3168 * configure.in: Pass "-Isrc" to the CPP we run to examine the
3169 s/*.h and m/*.h files. Martin Tomes
3170 <mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it.
3172 1993-06-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3174 * configure.in: Move i386-prime-sysv* and i386-sequent-bsd*
3175 above the general i386 alternative.
3177 1993-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3179 * configure.in: Recognize configuration name for Data General
3182 * configure.in: Use AC_LONG_FILE_NAMES.
3184 1993-06-09 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3186 * configure.in: Test for bison.
3187 * Makefile.in (YACC): New variable.
3188 (lib-src/Makefile.in): Edit YACC into the makefile.
3190 1993-06-08 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3192 * Version 19.13 released.
3194 * configure.in (CFLAGS): Don't set this according to the value of
3195 the GCC shell variable. Instead, consult the machine and system
3196 files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and
3197 test __GNUC__ while we're at it.
3199 * configure.in: Remove extra ;; from hpux cases.
3201 1993-06-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3203 * configure.in: Check to see if the system has -ldnet.
3205 1993-06-08 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3207 * make-dist: Add clauses to distribute lisp/forms-mode.
3209 1993-06-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3211 * configure.in (machine): Fix the versions in hpux version number test.
3212 Do not guess based on cpu type. Do check for explicit system version.
3214 1993-06-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3216 * configure.in: Do NOT look for `unknown' as company name.
3218 1993-06-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3220 * configure.in: Fix typo in message.
3222 1993-06-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3224 * Version 19.12 released.
3226 * Makefile.in (do-install): Correct previous etc-copying change.
3227 Partially rewrite using `if'.
3228 (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE.
3230 * Version 19.11 released.
3232 * configure.in: Handle 386bsd.
3234 1993-05-31 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3236 * make-dist: Update getdate.c.
3238 * configure.in: Handle bsd386.
3240 * Makefile.in (do-install): Use `-' in tar options.
3242 * configure.in: Change ! "${...}" to x"${...}" = x.
3244 * Makefile.in (do-install): Copy the DOC-* files from the build
3245 etc directory, as well as lots of things from ${srcdir}/etc.
3247 * make-dist: Copy config.guess.
3249 * configure.in: Handle AIX versions 1.2, 1.3.
3251 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3253 * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add
3254 the configuration name mips-mips-usg* to represent USG systems.
3256 * configure.in: Fix logic to detect if srcdir is already configured.
3258 * Makefile.in: Pass in LD_SWITCH_X_SITE.
3260 * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd
3261 foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name
3262 of a directory; cd might fail, and have pwd print out the current
3265 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3267 * configure.in: When looking for sources, use '.', not `.`. Also '..'.
3269 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3271 * configure.in: Complain if srcdir points at an already-configured
3274 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3276 * Version 19.10 released.
3278 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3280 * Makefile.in: Use Makefile comments, not C comments.
3282 * configure.in: Add case for the Tektronix XD88.
3284 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3286 * configure.in: Handle sysv4.2 and sysvr4.2.
3288 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3290 * configure.in: Traverse the argument list without destroying it;
3291 don't use shift. It turns out that "set - ${saved_arguments}"
3292 doesn't work portably.
3294 * configure.in: Add missing "fi".
3296 * make-dist: Rebuild configure if configure.in is newer.
3298 * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src
3299 targets to be executed even if make remembers that it has already
3302 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3304 * Makefile.in (do-install): Delete redundant code to copy etc twice.
3306 * configure.in (romp): Handle various version numbers with aos and bsd.
3308 1993-05-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3310 * configure.in: Fix message text.
3312 1993-05-28 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3314 * make-dist: Make a `site-lisp' directory in the distribution,
3315 instead of a `local-lisp' directory, which hasn't been the
3316 appropriate name for a long time.
3317 * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory
3318 from the distribution first, then /usr/local/lib/emacs/site-lisp.
3320 * Makefile.in (do-install): Correctly detect if ./etc and
3321 ${srcdir}/etc are the same.
3323 * configure.in: Extract UNEXEC from the system configuration
3324 files, compute the name of the source file corresponding to the
3325 object file, and #define it as UNEXEC_SRC in config.h.
3327 * configure.in: If srcdir is '.', then try using PWD to make it
3330 * configure.in: Include ${srcdir} in the printed report, to help
3331 people notice if it's an automounter path.
3333 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3335 * configure.in (prefix): Don't run pwd on srcdir unnecessarily.
3337 1993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3339 * Makefile.in (do-install): Delete the dest dir, not the source dir,
3340 when they are different. Add `shift' command.
3341 (COPYDESTS, COPYDIR): Delete external-lisp dir.
3342 (externallispdir): Var deleted.
3344 * configure.in: Delete spurious paren outputting short_usage.
3346 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3348 * Version 19.9 released.
3350 1993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3352 * Makefile.in (${SUBDIR}): Pass the value of the make variable to
3355 * make-dist: Check for .elc files with no corresponding .el file.
3357 * Makefile.in (mkdir): Make all the directories in locallisppath.
3359 * config.guess: New file.
3360 * configure.in: Use it, tentatively.
3361 * INSTNALL: Mention its usage.
3363 * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
3364 the former gives you the operating system rev directly. Use
3365 s/hpux.h if we don't recognize what we got.
3367 * Makefile.in (do-install): Don't remove a destination directory
3368 if it's the same as the source. If ${srcdir}/info == ${infodir},
3369 don't try to copy the info files.
3371 * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this
3372 doesn't work if you're not using a separate source directory.
3373 (do-install): Copy the build tree's etc directory only after
3374 making sure it's not also the source tree's etc directory.
3376 1993-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3378 * configure.in: Handle sunos4.1.3 specially.
3380 1993-05-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3382 * Makefile.in (INSTALL): Add definition.
3384 * configure.in: Fix some messages. Support -with-gnu-cc.
3385 At the end, use `set --', not `set -'.
3386 Delete spurious `.h' in hpux alternatives.
3388 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3390 * Version 19.8 released.
3392 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3394 * configure.in: When looking for source in the same directory as
3395 the configure script, make the path thus discovered absolute.
3396 If the user specifies the `--srcdir' switch, make that directory
3399 * Makefile.in (srcdir): Remove comment saying this doesn't work.
3401 * Makefile.in (src/paths.h): Edit the `infodir' variable into this
3402 too, as the value of the PATH_INFO macro.
3404 * configure.in: Check to see if the source lives in the same
3405 directory as the configure script.
3407 1993-05-24 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3409 * Makefile.in (install): Split this into `install' and
3410 `do-install', to give people more control over exactly what gets
3412 (do-install): New target, containing the guts of `install'. Don't
3413 remove and recreate the directories inside the copying loop - do
3414 it all before the copying loop. Pass more flags to the lib-src
3416 (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
3417 avoid errors and warnings.
3419 * configure.in: For generic IBM PC boxes, insist on "unknown" for
3420 the manufacturer - the more general case was blocking other i386
3421 configuration names below, and that's how the names are written in
3424 * make-dist: When breaking links, remove the link before moving
3425 the copy onto it, to avoid interactive behavior.
3427 * Makefile.in: Doc fix.
3429 * configure.in: Doc fix.
3431 * INSTALL: Mention --exec-prefix option.
3433 * configure.in: Add support for the `--exec-prefix' option.
3434 * Makefile.in: Accept that support.
3436 * configure.in: Use the AC_PROG_INSTALL macro.
3437 * Makefile.in (INSTALL): Variable removed.
3438 (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure.
3440 * configure.in: Distinguish between hp800's and hp700's by calling
3443 1993-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3445 * configure.in: Recognize configuration names for i860 boxes
3448 1993-05-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3450 * configure.in: Distinguish between hp800's and hp700's by the
3451 version of HP/UX they run, since that's something people are more
3452 likely to know - hp700's run 8.0.
3453 Add HP 700 configuration.
3455 * configure.in: Test for the presence of the `rename' function.
3457 * Makefile.in (C_SWITCH_X_SITE): New variable - get this from
3459 (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this.
3461 * make-dist: Break intra-tree links.
3463 * configure.in: Explain that this is an autoconf script, and give
3464 instructions for rebuilding configure from it. Arrange to put
3465 comments in configure explaining this too.
3467 * configure.in: Make the first line of the configure script be
3468 "#!/bin/sh". Leaving the first line blank didn't work.
3470 * configure.in (long_usage): Removed; made short_usage describe
3471 the options briefly.
3473 * configure.in: Implement the --prefix option.
3474 * Makefile.in (prefix): Add support for it here.
3475 * INSTALL: Document it here.
3477 * Makefile.in (install): Don't assume that the files in the `info'
3478 subdirectory match *.info. They don't have that prefix.
3480 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3482 * configure.in: Add case for version 5 of Esix.
3484 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3486 * Version 19.7 released.
3488 * make-dist: There aren't any *.com files in lib-src anymore.
3490 * make-dist: Copy texinfo.tex and texindex.c, rather than linking
3491 them; they're symlinks to other filesystems on the GNU machines.
3493 * make-dist: Check that the manual reflects the same version of
3494 Emacs as stated in lisp/version.el. Edit that version number into
3497 1993-05-21 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3499 * configure.in: Remove the hack of AC_DEFINE; use
3502 1993-05-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3504 * make-dist: Don't distribute precomp.com, compile.com, or
3505 link.com from ./src; they're in ./vms now.
3507 Some time-handling patches from Paul Eggert:
3508 * configure.in: Add AC_TIMEZONE.
3510 1993-05-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3512 * configure.in: Recognize Linux as a valid operating system for
3515 1993-05-18 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3517 * make-dist: Distribute some VMS files we got from Richard Levitte.
3519 * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as
3520 the source for the sed command, not oldXMenu/Makefile.
3522 1993-05-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3524 * INSTALL: Don't claim the srcdir option doesn't work.
3526 1993-05-16 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3528 * configure.in: Include remarks saying what order the autoconf
3529 tests should go in, and remind people to change config.h.in
3530 whenever they add autoconf tests which make #definitions.
3532 * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile.
3534 1993-05-15 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3536 * Makefile.in (oldXMenu/Makefile): Make this depend on
3537 ${srcdir}/oldXMenu/Makefile.in, not itself.
3539 * PROBLEMS: Some updates from David J. Mackenzie.
3541 More changes from David J. Mackenzie.
3542 * Makefile.in (install.sysv, install.xenix, install.aix): Targets
3543 removed; autoconf and config.h should specify all these
3545 (buildlisppath): Make this path depend on ${srcdir}.
3546 (INSTALLFLAGS): Removed.
3547 (INSTALL): Include the -c flag.
3548 (install): Change the way we invoke install accordingly.
3550 Install ${srcdir} changes from DJM.
3551 * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this
3553 (COPYDIR, COPYDESTS): Install files from both the etc directory in
3554 the source tree and the etc directory in the object tree.
3555 (${SUBDIR}): Pass the prefix variable down to submakes.
3556 (everywhere): Use `sed', not `/bin/sed'. Not all systems have sed
3558 (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in
3559 values for srcdir and VPATH.
3560 (install): Add `v' flag to tar command. Make sure that `dir'
3561 exists in ${srcdir}/info before copying it. Remember that the man
3562 pages come from the source tree, not the object tree.
3563 * configure.in: Remove remarks saying that the --srcdir option
3565 Create the etc directory in the object tree.
3566 Recognize configuration names of the form *-sun-solaris*.
3567 Recognize sunos5 and solaris as operating system names.
3569 * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for
3570 lib-src/getdate.y and src/systime.h.
3572 1993-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3574 * make-dist: Make links in info subdir.
3576 1993-05-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3578 * configure.in: Call AC_STDC_HEADERS.
3580 1993-05-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3582 * configure.in: Sidestep autoconf's quoting of the second argument
3583 of AC_DEFINE, so we can specify the value to put there. It would
3584 be nice if autoconf provided some way to specify computed values
3587 1993-05-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3589 * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
3590 this is always just -DHAVE_CONFIG_H.
3592 The GNU coding standards specify that CFLAGS should be left for
3594 * Makefile.in (CFLAGS): Let configure determine the default value
3596 have it default to DEFS.
3597 (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
3598 (lib-src/Makefile, src/Makefile): Edit the default value for
3599 CFLAGS into these files, not DEFS.
3600 * configure.in (CFLAGS): Choose a default value for this - "-g"
3601 normally, or "-g -O" if we're using GCC. Edit it into the
3604 * configure.in: When scanning the machine and system description
3605 #include files, write their names to conftest.c properly.
3607 1993-05-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3609 * configure.in: In configuration name case for Apallos running
3610 Domainios, set opsys, not opsysfile.
3612 * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce
3613 src/config.h, instead of AC_OUTPUT; the latter overwrites
3614 src/config.h even when it hasn't changed, puts a makefile-style
3615 comment at the top even though it's C code, and produces a
3616 config.status script which doesn't do the job right.
3618 * configure.in: Add AC_LN_S test, so we can tell whether or not we
3619 can use a symbolic link to get the X Menu library into src.
3620 * Makefile.in (LN_S): New variable.
3621 (src/Makefile): Edit the value of LN_S into this makefile.
3623 1993-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3625 * configure.in: Support *-sco3.2v4* as opsystem.
3627 * make-dist: Don't include calc directory.
3628 Exclude many files in the man directory; copy a few.
3630 1993-05-04 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3632 * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and
3633 call AC_STRUCT_TM to see what's in time.h.
3635 * configure.in: Employ quoting stupidity to get the value of CPP
3638 1993-04-27 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3640 * configure.in: Use the AC_PROG_CPP macro, and then use the CPP
3641 variable to scan the machine and system description files.
3643 * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h,
3644 so that getdate.y builds correctly.
3646 1993-04-26 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3648 * configure.in (tempcname): Change this to "conftest.c", so it will
3649 work properly on systems with short filenames; this is the name
3652 * configure.in: Also detect the availability of dup2 and
3655 * configure.in: Use the AC_ALLOCA test.
3656 * Makefile.in (ALLOCA): New variable, to be set by ./configure.
3657 (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
3659 1993-04-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3661 * make-dist: Distribute configure, as well as configure.in.
3664 1993-04-23 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3666 * Makefile.in (install): Print out the name of the directory we're
3667 copying, so people can have some idea of whether we're making
3670 * Makefile.in (install.aix, install.xenix, install.sysv, install):
3671 Don't forget to re-create the COPYDESTS directories after we clear
3674 1993-04-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3676 * Makefile.in: Add autoconf cookies so that the configure
3677 script can comment out sections of path variable definitions to
3678 choose between the installable configuration and the run-in-place
3680 * configure.in: Add new option `--run-in-place', to select the
3681 run-in-place path definitions.
3683 * configure.in: Add a clause to the big configuration name case
3684 for the NeXT machine.
3686 1993-04-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3688 * Makefile.in (install, install.sysv, install.xenix, install.aix):
3689 Make sure that each source directory exists, and is different from
3690 the destination directory; then, delete the destination before
3691 copying over the source.
3693 * make-dist: Distribute configure.in, instead of configure.
3695 1993-04-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3697 * configure.in: Don't set CC to "gcc -O" if the user specifies
3698 `--with-gcc'. Add -O to DEFS if GCC is set.
3700 1993-04-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3702 * Makefile.in (clean mostlyclean): Missing right paren.
3704 * configure.in: When checking for X windows, search for an X11
3705 subdirectory of ${x_includes}.
3707 * configure.in: Check for gettimeofday function, for getdate.y.
3709 Change `configure' to a mixture of custom code and autoconf stuff.
3710 autoconf can't derive all the information we need, but we'd really
3711 like to be able to take advantage of some of its tests, and its
3712 file-editing facilities.
3713 * configure.in: Renamed from configure.
3714 Quote the sections of shell script we want copied literally to
3715 the configure script.
3716 (compile): Initialize this to make the autoconf macros' code happy.
3717 Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
3718 code to do their jobs.
3719 Use autoconf to produce Makefile and src/config.h.
3720 Remove the Makefile-style comment that autoconf places at the top
3722 (config_h_opts): Removed - no longer necessary.
3723 * Makefile.in (configname): Renamed to configuration.
3724 (CONFIG_CFLAGS): Renamed to DEFS.
3725 (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
3726 get values via autoload @cookies@.
3727 (libsrc_libs): Get this from autoconf. We used to do nothing
3729 (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
3731 * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
3732 echo the move-if-change command.
3734 1993-04-08 Jim Blandy (jimb@churchy.gnu.ai.mit.edu)
3736 * make-dist: Distribute lib-src/rcs-checkin.
3738 * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms.
3739 Don't try to make links to the RCS or Old subdirectories.
3740 Use the appropriate extension for the compression type in use.
3741 Create the tar file in the shell's initial default directory, not
3743 Erase the whole ${tempparent} tree, not just ${tempdir}.
3745 1993-03-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3747 * Makefile.in (src/paths.h): Don't echo the huge sed command we
3748 use to build paths.h.
3749 (lib-src/Makefile, src/Makefile): Similarly.
3751 * configure: Extend test for working `const' keyword to handle AIX
3754 1993-03-24 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3756 * make-dist: Distribute lisp/term/ChangeLog.
3758 Arrange for C compilation throughout the tree to get
3759 C_SWITCH_SYSTEM from the configuration files.
3760 * configure: Extract C_SWITCH_SYSTEM from the machine and
3761 system-dependent files, and save it in the top-level Makefile.
3762 * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit.
3763 (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile.
3765 * make-dist: Include the VMS support files in oldXMenu in the
3768 * configure: Doc fix.
3770 * configure: Fix corrupted config_h_opts.
3772 * configure: Properly report option names in error messages.
3774 * configure: Properly recognize --x-includes and --x-libraries
3777 * configure: Fix syntax errors in code handling XFree386.
3779 1993-03-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3781 * configure: Add special code to detect XFree386, and tell
3784 * configure: Properly handle extracting values of LIBS_MACHINE and
3785 LIBS_SYSTEM that contain spaces.
3787 * configure: Add `--x-includes' and `--x-libraries' options. I
3788 think these are dopey, but no less than three alpha testers, at
3789 large sites, have said they have their X files installed in odd
3790 places. Implement them by setting C_SWITCH_X_SITE and
3791 LD_SWITCH_X_SITE in src/config.h.
3793 1993-03-22 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
3795 * make-dist: Don't distribute etc/Old files.
3797 * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their
3800 1993-03-20 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3802 * make-dist: Fix typo.
3804 1993-03-19 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
3806 * make-dist: Corrected typo, fixed it to discard = and TAGS files
3807 in some cases where it should but didn't seen to.
3809 * Makefile.in: Added unlock and relock productions.
3811 1993-03-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3813 * make-dist: Add a --compress option to force make-dist to use
3816 * make-dist: Use gzip, if we can find it.
3818 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
3819 make rs6000-ibm-aix default to -aix32.
3821 1993-03-17 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
3823 * Makefile.in: Added `Developer's configuration' section.
3825 1993-03-17 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
3827 * Makefile.in: Add commented-out variable settings for developer's
3830 1993-03-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3832 * make-dist: Distribute `src/bitmaps' too.
3834 1993-03-14 Charles Hannum (mycroft@hal.gnu.ai.mit.edu)
3836 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
3837 make rs6000-ibm-aix default to -aix32.
3839 1993-03-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3841 * configure: Recognize strings like "sysvr0" or "sysvr1" as System V.
3843 * Makefile.in (install.sysv): Add a second `$' in front of
3844 `${dest}', so that the shell will expand it, instead of Make.
3846 * configure: When processing the name of the configure script,
3847 collapse `././' to `./', but leave a single `./' prefix alone.
3849 * configure: Doc fix.
3851 1993-03-04 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3853 * configure: Handle isc3.0 correctly.
3855 1993-02-25 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3857 * make-dist: Don't try to copy the COPYING notice into
3858 external-lisp; we're not distributing that directory any more.
3860 1993-02-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3862 * Makefile.in (install, install.aix, install.xenix, install.sysv):
3863 Remove CVS subdirectories from the installed directory trees, as
3864 well as RCS directories.
3866 1993-02-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3868 * make-dist: Only copy gmalloc.c if we couldn't link it.
3869 Don't try to copy man/{README,Makefile} unless they actually exist.
3871 * Makefile.in (lisppath): Don't include externallispdir in this.
3872 We're not sure whether we're even going to distribute the
3875 1993-02-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3877 * make-dist: Don't distribute the external-lisp directory anymore.
3878 * INSTALL: Remove all references to external-lisp.
3880 * configure: Detect whether the compiler supports `const'
3881 properly, and edit src/config.h accordingly.
3883 * configure: Tweak layout of final report.
3885 * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not
3888 * Makefile.in (locallisppath): Make this default to
3889 ${datadir}/emacs/site-lisp, instead of
3890 ${datadir}/emacs/local-lisp. ${datadir} and ${statedir} are often
3891 the same thing, and local-lisp causes completion conflicts with
3893 (lisppath): Add ${externallispdir} to this.
3894 * INSTALL: Adjust installation directions.
3896 * Makefile.in (externallispdir): New variable, to say where to
3897 install the externally-maintained lisp files.
3898 (COPYDIR, COPYDESTS): Copy the external lisp directory just like
3900 * INSTALL: Describe external-lisp and the new externallispdir
3903 1993-02-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3905 * configure (progname): New option `--with-gcc'. Make it clearer
3906 how we are trying to guess whether or not we have GCC.
3907 * INSTALL: Document the `--with-gcc' option, and improve
3908 description of `--with-x' options.
3910 1993-02-06 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3912 * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and
3913 ${infodir} from these variables; we have written out explicit code
3914 to install the info files.
3916 1993-01-25 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3918 * make-dist: Don't distributed the RCS files in the etc directory.
3920 1993-01-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3922 * Makefile.in: Some makes can't handle comments in the middle of
3923 commands; move them to before the whole rule.
3925 1993-01-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3927 * README: Mention what Emacs is.
3929 1993-01-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3931 * make-dist: Include `./lisp/calc-2.02' in the distribution.
3932 Add `./cpp' and `./man' back into the distribution.
3934 1993-01-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3936 * Makefile.in: Define MAKE, and use where appropriate.
3938 1993-01-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3940 * make-dist: Remember that the authoritative COPYING notice is
3941 `etc/COPYING', not `../etc/COPYING'.
3943 1992-12-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3945 * make-dist: Make sure that the COPYING notices in each directory
3946 are copies, not symlinks.
3948 1992-12-19 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3950 * INSTALL: The build process produces an executable called `emacs'
3951 now. Change references.
3952 * Makefile.in: Adjust `install.mumble' targets to install
3953 `src/emacs', not `src/xemacs'.
3955 * configure: Start with a blank line; this keeps some old CSH's
3956 from thinking it's a CSH script. Most systems will just use
3957 /bin/sh to run it, which is what we're expecting; the only other
3958 shells which might try to interpret it themselves are probably
3961 1992-12-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3963 * INSTALL: Improvements suggested by David Mackenzie.
3965 1992-12-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3967 * Makefile.in (install, install.sysv, install.xenix, install.aix):
3968 Don't try to copy the info files if there aren't any; the
3969 unexpanded globbing pattern disappoints `install'. Ignore the
3970 return status of that command.
3972 * INSTALL: Updated for new configuration arrangement.
3974 * configure: Don't make the top-level Makefile read-only - people
3975 may want to edit the values of the path variables.
3977 * Makefile.in (install, install.sysv, install.xenix, install.aix):
3978 Install the info files in ${infodir}. Install the executable
3979 under both `emacs' and `emacs-VERSION'.
3981 * Makefile.in: Doc fix.
3983 * Makefile.in (exec_prefix): New variable, as per latest version
3984 of coding standards.
3985 (bindir, libdir): Use it, instead of `prefix'.
3986 (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
3988 * Makefile.in (mandir): Make the default value for this depend on
3991 * Makefile.in (datadir, statedir, libdir): Make these all default
3993 (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
3996 * Makefile.in (install, install.sysv, install.xenix, install.aix):
3997 Install the etags and ctags man pages too.
3999 * Makefile.in (distclean): Don't delete backup files; that's the
4001 (extraclean): Like distclean, but deletes backup and autosave files.
4003 1992-12-10 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4005 Make path specification conform to GNU coding standards.
4006 * configure (long_usage): Remove all traces of old arguments from
4007 usage messages, and document the options we do accept in more
4008 detail: -with-x... and --srcdir.
4009 (options, boolean_opts): Deleted; we don't have enough options to
4010 make this worthwhile.
4011 (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
4012 along with the code which supported them; these should be set as
4013 arguments to the top-level make.
4014 (config_h_opts): Since this no longer doubles as a list of option
4015 names, make them upper case; this simplifies the code which uses
4016 them to build the sed command to edit src/config.h. Change the
4017 code which sets them.
4018 (cc, g, O): Don't allow the user to set these using options; they
4019 should be specified using `CC=' and `CFLAGS=' arguments to the
4020 top-level make. Just choose reasonable default values for them,
4021 and edit them into Makefile.in's default CC and CONFIG_CFLAGS
4023 (gnu_malloc, rel_alloc): Don't allow the user to set these using
4024 options; use them whenever the configuration files say they're
4026 Simplify the argument processing loop. Don't accept abbreviations
4027 for option names; these might conflict with other configuration
4028 options in the future.
4029 Add some support for the `--srcdir' option. Check for the sources
4030 in . and .. if `--srcdir' is omitted. If the directories we will
4031 compile in don't exist yet, create them under the current directory.
4032 Note that the rest of the build process doesn't really support
4034 Edit only the top Makefile. That should edit the others. Edit
4035 into the makefile: `version', from lisp/version.el, `configname'
4036 and `srcdir' from the configuration arguments, `CC' and
4037 `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
4038 the user's path, and LOADLIBES as gleaned from the system
4040 Simplify the report generated; it doesn't need to include any
4041 description of paths now.
4042 Make `config.status' exec configure instead of just calling it, so
4043 there's no harm in overwriting `config.status'.
4044 * Makefile.in (version, configname): New variables, used to choose
4045 the default values for datadir and libdir.
4046 Path variables rearranged into two clearer groups:
4047 - In the first group are the variables specified by the GNU coding
4048 standards (prefix, bindir, datadir, statedir, libdir, mandir,
4049 manext, infodir, and srcdir).
4050 - In the second are the variables actually used for Emacs's paths
4051 (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
4052 archlibdir), which depend on the first category.
4053 datadir and libdir default to directories under
4054 ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
4056 etcdir and lispdir default to subdirectories of datadir.
4057 archlibdir defaults to libdir.
4058 The new installation tree is a bit deeper than it used to be, so
4059 use the new make-path program in lib-src to build them all.
4060 Always build a new src/paths.h.tmp and then move-if-change it to
4061 src/paths.h, to avoid unnecessary rebuilds while responding to the
4063 Remove all mention of arch-lib. Run utility commands from
4064 lib-src, and let the executables be copied into archlibdir when
4066 Add targets for src/Makefile, lib-src/Makefile, and
4067 oldXMenu/Makefile, editing the values of the path variables into
4069 Let lib-src do its own installation.
4070 (datadir): Default to putting data files under
4071 ${prefix}/lib/emacs/${version}, not /usr/local/emacs.
4072 (emacsdir): Variable deleted; it would only be confusing to use.
4073 (lispdir, etcdir): Default to ${datadir}/lisp.
4074 (mkdir): Use make-path for this.
4075 (lockdir): Do this in mkdir.
4076 (Makefile): New target.
4078 * configure (usage_message): Rename to long_usage.
4080 * make-dist: Don't bother creating an arch-lib directory; that's
4081 only for installation now.
4083 1992-11-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4085 * configure: Use GCC-style configuration names, using config.sub.
4086 Change the usage and help messages.
4088 * configure: Initialize window_system, not indow_system.
4090 * configure: Report which window system, compiler, and signal
4091 handler return type we decide to use.
4093 * make-dist: Explain what's going on if config.sub and gmalloc.c
4094 can't be linked. Place the code which copies them near the code
4095 which links the rest of the files around them.
4097 1992-11-15 Jim Blandy (jimb@apple-gunkies.gnu.ai.mit.edu)
4099 * make-dist: Don't bother to distribute src/*.com, or
4100 src/vmsbuild; those have all been moved to `../vms'.
4102 1992-11-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4104 * make-dist: Don't forget that the way to avoid filenames starting
4105 with `=' is to use the pattern `[a-zA-Z0-9]*.h', not
4106 `[a-zA-Z0-9].h'. Add a new section for dealing with files that we
4107 couldn't make hard links to, since we have two already, and
4108 perhaps more to come.
4110 1992-11-04 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4112 * configure: When editing parameters into lib-src/Makefile, change
4113 the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS
4114 needs some other flags too.
4116 1992-11-03 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4118 * configure: Remove spurious echo of the configuration name.
4120 * make-dist: Don't distribute files in src/m and src/s whose names
4123 1992-10-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4125 * configure: Update GNU_MALLOC and REL_ALLOC in config.h.
4126 Also LISP_FLOAT_TYPE.
4128 1992-10-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4130 * make-dist: Copy config.sub, since it's a symbolic link to a file
4131 on another file system.
4133 1992-10-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4135 * make-dist: Include lib-src/makedoc.com and emacs.csh in the
4138 * config.sub: New file, to help us recognize configuration names.
4139 * make-dist: Include it in the distribution.
4141 1992-09-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4143 * configure: Convert `-' to `_' in specified option names.
4144 Accept options with --. Delete --highpri and --have-x-menu options.
4145 New options --with-x and --with-x10 replace -window-system.
4146 Don't mention options --gnu-malloc, --rel-alloc
4147 or --lisp-float-type in help message.
4149 1992-09-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4151 * make-dist: Include the `vms' subdirectory in the distribution.
4153 1992-09-10 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4155 * configure: Remove lines starting with "# DIST: " when building
4156 lib-src/Makefile and src/Makefile. This allows us to mark the
4157 "Makefile.in" files with explanatory comments which won't also get
4158 stuck in the Makefiles.
4160 1992-09-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4162 * make-dist: Don't use the '+' operator in the sed regular
4163 expression that extracts the version number from lisp/version.el;
4164 Ultrix sed doesn't seem support the operator. Just double the
4167 1992-09-01 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4169 * Makefile.in: Doc fix.
4171 1992-08-31 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4173 * configure: Rewrite sed command to remove at most one ./ prefix;
4174 Ultrix's sed doesn't allow us to apply the * operator to a \( \)
4177 1992-08-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4179 * Makefile.in (src/paths.h): Use sed, not /bin/sed.
4181 1992-08-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4183 * make-dist: Go ahead and build a new TAGS file, unless the
4184 --newer option was specified. Don't try to delete a TAGS file
4185 from etc; it's not kept there, and shouldn't be deleted anyway.
4187 1992-08-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4189 * make-dist: If the lisp directory contains a default.el, don't
4192 * configure: When searching signal.h for the type of a signal
4193 return handler, make a copy of it, not a symbolic link to it; that
4194 way, it will work on systems that don't have symbolic links.
4196 1992-08-14 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4198 * make-dist: taught it about vcdiff and rcs2log, added --newer
4199 option for generating incremental distributions. Stopped it from
4200 generating a TAGS file into the distribution; that sucker is
4201 *big*, and easily enough generated with the toplevel makefile.
4203 1992-08-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4205 * configure: When writing config.status, don't prefix progname
4206 with a '.'; it might be absolute.
4208 1992-08-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4210 * configure: Choose to use X11 if either /usr/lib/libX11.a or
4211 /usr/include/X11 exist, not only if both exist.
4213 1992-07-27 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4215 * make-dist: Make the new external-lisp directory a duplicate of
4216 the external-lisp directory, not the lisp directory.
4218 1992-07-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4220 * Makefile.in (clean, mostlyclean): Don't bother trying to `make
4221 clean' in arch-lib; it doesn't even have a Makefile.
4223 * Makefile.in (clean, mostlyclean): In the test which tries to
4224 distinguish between the build directory, which should be cleaned,
4225 and the installed directory, which shouldn't, cd to `${emacsdir}',
4226 not `${DESTDIR}${LIBDIR}'.
4228 1992-06-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4230 * make-dist: Be sure to delete the .c and .h files that YACC and
4231 BISON create from getdate.y.
4233 * external-lisp: New directory; see `external-lisp/README'.
4234 * make-dist: Added support for the external-lisp subdirectory.
4236 * make-dist: Changed message which complains that make-dist wasn't
4237 invoked in the right directory to indicate which files it was
4240 1992-06-29 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4242 * configure: Add comments explaining why we can't translate
4243 character ranges or control characters in `tr'.
4245 1992-06-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4247 * configure: When generating the configuration message, we used to
4248 build the message from the start so that each line began with "# "
4249 so that it would be a comment in `config.status'. However, this
4250 causes trouble if any of the variables we use in the message
4251 expand to more than one line of text - as gnu_malloc_reason
4252 sometimes does. So instead, we build the message as it should be
4253 printed to the user (i.e. without the "# " prefixes), and stick on
4254 the "# "s when we write it to `config.status'.
4256 * Makefile.in (clean, mostlyclean): Don't neglect to clean out
4257 `lib-src' and `arch-lib'.
4259 * configure: When generating report and `config.status' file, note
4260 that bindir only determines where `make install' and
4261 `build-install' will place the executables; this should make it
4262 clear that the ordinary build process will not try to install
4265 1992-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4267 * make-dist: Change messages to say that we are 'making links to
4268 X', rather than 'copying X'. And put `' quotes around file names.
4270 * make-dist: Include '.tmp' in the name of the staging directory.
4272 * make-dist: Pass the `-f' option to rm when you're not sure that
4273 the files you're removing actually exist.
4275 * make-dist: When setting up etc/COPYING, always nuke whatever is
4276 there, and then copy it in, to make sure we get a real file.
4278 * make-dist: Don't try to distribute *.defns files any more. The
4279 only such file was for simula.el, which has been superceded by a
4280 version which doesn't have a separate .defns file.
4282 1992-05-28 Ken Raeburn (Raeburn@Cygnus.COM)
4284 * make-dist: Don't distribute configured versions of config.h.in,
4285 paths.h.in, Makefile.in in src.
4287 * configure: Delete .tmp files before creating them; don't bother
4288 trying to make final targets writeable first, since it won't
4289 matter to move-if-change.
4291 1992-05-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4293 * Makefile.in (mkdir, lockdir): Don't put dashes in front of the
4294 mkdir and chmod in the center of all the conditionals. GNU Make
4295 will strip these out, but other makes won't.
4297 1992-05-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4299 * make-dist: Include move-if-change in list of files to distribute.
4301 1992-05-04 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4303 * configure: Remove any "." elements from the program name.
4305 * configure: Don't record the values of all the possible arguments
4306 in config.status; only record the options that the user specified.
4308 * configure: Use move-if-change to move in the new src/config.h.
4310 1992-04-29 Ken Raeburn (Raeburn@Cygnus.COM)
4312 * move-if-change: New file, copied from gcc release.
4313 * Makefile.in (src/paths.h): Use it, and put the "sed" output into
4314 a temp file, so we don't update paths.h if an error occurs or if
4315 it doesn't need changing.
4317 1992-04-28 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4319 * Makefile.in (src/paths.h): Do not install a value for the
4320 PATH_SUPERLOCK value; that macro doesn't exist anymore.
4321 * build-install.in: Same thing.
4323 1992-04-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4325 * make-dist: Check the flag called "make_tar", not "make_dir"; the
4326 latter, being a typo, is always false, resulting in a program
4327 whose default behaviour is to painstakingly build a copy of the
4328 source tree, and then delete it. Rah.
4330 * Makefile.in: Add dist target, and comment for it.
4332 * configure: When scanning <signal.h> for a declaration for
4333 signal, create a symbolic link with a name ending in .c, so the
4334 compiler won't complain that it's only been given .h files.
4336 * configure: Check whether there are any arguments available
4337 before shifting to get the value of a non-boolean parameter.
4339 * make-dist: Doc fix.
4341 1992-04-20 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4343 * configure: Instead of grepping /usr/include/signal.h for a
4344 signal declaration, run /usr/include/signal.h or
4345 /usr/include/sys/signal.h through cpp and grep for the
4348 * configure: Redirect the output of grep to /dev/null instead of
4349 using grep -s - that flag means different things on other systems.
4351 * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath',
4352 since the former is recognizable even if you don't know what
4354 * configure: Accomodate that change.
4356 * configure: Accept options for all of the directories you can
4357 change in the Makefile.
4359 * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE".
4361 * INSTALL: Mention that you have to copy all the 'FOO.in' files to
4362 FOO before you can use them.
4364 * build-install.in: Made the "Where To Install Things" section
4365 conform with the similar section from Makefile.in. Copied section
4366 which builds src/paths.h from src/paths.h.in from the Makefile.
4368 1992-04-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4370 * configure: Write config.status to pass its command-line
4371 arguments on to configure, so that people can use it to recreate
4372 an old configuration, with minor changes.
4374 1992-04-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4376 * configure: Don't rely on option variables being unset if their
4377 values are the empty string. In particular, when producing the
4378 English report, don't assume that highpri will be unset when no
4379 increased priority has been requested; -highpri='' should be the
4380 same as omitting -highpri altogether.
4382 * configure: Fix dumb bug: when running the system and machine
4383 description files through cpp, mark those lines that we want to
4384 evaluate with the string '@configure@', and then only evaluate
4385 them. This way if the files include anything that actually
4386 generates text (type definitions or external declarations, say),
4387 we won't try to eval it.
4389 1992-04-11 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4391 * make-dist: New shell script.
4393 * configure: When creating foo from foo.in, make foo read-only to
4394 remind people to edit the .in file instead.
4396 * INSTALL: Changed references to config.h-dist to config.h.in.
4397 The "BUILDING GNU EMACS BY HAND" section neglected to mention how
4398 to build src/paths.h from src/paths.h.in; added a paragraph to do
4400 * configure, Makefile, build-install: Changed filenames like
4403 1992-04-08 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4405 * Makefile, build-install: Renamed to Makefile.in and
4406 build-install.in; the configure script will edit these to produce
4407 the usable Makefile and build-install.
4408 * configure: Changed to produce ./Makefile, ./build-install,
4409 lib-src/Makefile, and src/Makefile from their *.in counterparts,
4410 instead of editing them in place.
4412 1992-04-07 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4414 * Makefile: Re-arranged so that the undumped Emacs will search
4415 ../lisp *after* the site's local elisp files.
4416 (locallisppath, dumplisppath): New variables.
4417 (lisppath): This variable's default value is now chosen based on
4418 $(locallisppath) and $(lispdir); while it used to be the
4419 customization point for adding site-local elisp directories to
4420 load-path, that job is now handled mostly by locallisppath.
4421 (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH.
4422 Check the values being assigned to the *LOADSEARCH macros for null
4423 path elements (like '::' in 'foo::bar').
4425 * configure: When checking if the machine- and system-dependent
4426 files define a particular macro or not, actually run them through
4427 CPP and test the macros with #ifs, instead of just grepping for
4428 the macros' names. In particular, check for SYSTEM_MALLOC in this
4431 1992-04-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4433 * Makefile (install): Don't use -s in install. (Keep the symbols.)
4435 1992-04-02 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4437 * configure: Make the config.status file an executable shell
4438 script which will recreate the same configuration. Include the
4439 verbal description of the current configuration as a comment in
4443 * Makefile: brought the Makefile up to the GNU coding
4444 standards, as described in standards.text:
4445 (TAGS): New name for the target which rebuilds the tags table.
4446 (check): New target; doesn't do anything yet.
4447 (mostlyclean): New target, synonymous with clean.
4448 (realclean): New target. Currently, this just calls the
4449 subdirectories's makefiles and then deletes config.status.
4450 (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
4452 Installation directory variables changed to conform.
4453 (install, install.sysv, install.xenix, install.aix): Changed the
4454 code which copies the directories into their installed location to
4455 allow the installed locations to be in several different
4456 directories; the old version assumed that they would all be in
4458 (mkdir, lockdir): Allow the installed locations to be in several
4459 different directories.
4462 * build-install: Use the same variable names as the Makefile.
4463 Allow the installed locations to be in several different
4466 1992-03-31 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4468 * Makefile (src/paths.h): Instead of using a single sed command to
4469 edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two
4470 separately, and don't forget to append "/!!!SuperLock!!!" to the
4471 value of the PATH_SUPERLOCK macro.
4473 * config.emacs: Renamed to configure, for consistency with other
4474 GNU products. Internal references changed.
4475 INSTALL, Makefile: References changed.
4477 * lock: New directory, which should always be empty. If this
4478 directory doesn't exist, Emacs won't complain; it just won't lock.
4479 Having this here means that people can just unpack Emacs, build
4480 it, and have locking work.
4482 * share-lib: Re-renamed to etc, for the sake of tradition.
4483 * config.emacs: Changed default value for datadir to ../etc.
4484 * INSTALL, README: Adjusted.
4486 1992-03-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4488 * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile
4489 by running CPP on the appropriate s/*.h and m/*.h files.
4491 1992-03-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4493 * config.emacs: Make sure to set the "exit on error" flag once
4494 we've removed config.status; errors should abort the configuration.
4496 1992-02-15 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4498 * config.emacs: Added -distribute option, so that the Makefile
4499 paths are in their proper form. I don't know why this matters.
4501 1992-02-14 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4503 * local-lisp: New directory, empty in the distribution, for people
4504 to put local elisp code in.
4505 * config.emacs: Include it in the default load path.
4506 * README: Document it.
4508 1992-01-30 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4510 * config.emacs: Guess the type of signal handling functions based
4511 on the contents of /usr/include/signal.h.
4513 * config.emacs: Print out progress report messages.
4515 * Makefile (src/paths.h): Don't generically replace
4516 /usr/local/lib/emacs with LIBROOT. This can hide bugs in the
4517 editing of the other entries, and each entry should be dealt with
4520 * build-install: Converted from C-shell to Bourne shell.
4521 * config.emacs: Edit build-install properly.
4523 * config.emacs: Doc fix.
4525 1992-01-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4527 * Makefile (install): Remove `B' from tar xf command.
4529 1992-01-13 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4531 * config.emacs: Removed support for the `maintain-environment'
4532 option; the only important difference between this and its absence
4534 * INSTALL: Removed mention of `maintain-environment'.
4536 * config.emacs: Fix arguments to sed when processing boolean
4539 1991-12-05 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
4541 * config.emacs: New file, to help automate the installation
4544 * Makefile: Lots of changes to support the separation of etc into
4545 architecture-dependent and -independent files:
4546 (EMACSROOT): New variable, giving the directory under which all of
4547 Emacs's libraries should be installed. Changed rest of file to
4549 (LIBDIR): Now denotes only architecture-dependent dir - relevant cha
4550 (DATADIR): New variable, denoting architecture-independent dir.
4551 (LOCKDIR): New variable, for completeness.
4552 (SUBDIR): No more etc, new lib-src.
4553 (COPYDIR): No more etc, new arch-lib and share-lib.
4554 (src/paths.h): Set PATH_DATA and the LOCK macros too.
4555 (src): Now depends on lib-src, not etc.
4556 * build-install: Changes parallel to the above.
4557 * README: Describe the new arrangement.
4559 * vms: New subdirectory for all the VMS stuff.
4561 1991-12-03 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
4563 * Makefile (LISPPATH): New variable.
4564 (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH.
4566 1990-09-28 Richard Stallman (rms at mole.ai.mit.edu)
4568 * Makefile (install, install.sysv, install.xenix):
4569 Install wakeup instead of loadst. No need for setuid or setgid.
4571 1990-08-07 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4573 * Makefile (clean): Clean etc if that's not the installation dir.
4575 1990-04-26 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4577 * Makefile (paths.h): Make sed alter each name in the path.
4579 1988-08-30 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4581 * Makefile (install.sysv): Use cpio, not tar.
4583 1988-08-03 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
4585 * Makefile (lockdir): Rename `lock' target.
4586 Depend on it from install*, not from `all'.
4588 1988-05-16 Richard Stallman (rms at frosted-flakes.ai.mit.edu)
4590 * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin}
4591 to match build-install and paths.h.