| blob | d1f2702d3568a27fbc8c45d13344aa57fa76b2b5 |
1 @echo off\r
2 rem ----------------------------------------------------------------------\r
3 rem Configuration script for MSDOS\r
4 rem Copyright (C) 1994-1999, 2001-2017 Free Software Foundation, Inc.\r
5 \r
6 rem This file is part of GNU Emacs.\r
7 \r
8 rem GNU Emacs is free software: you can redistribute it and/or modify\r
9 rem it under the terms of the GNU General Public License as published by\r
10 rem the Free Software Foundation, either version 3 of the License, or\r
11 rem (at your option) any later version.\r
12 \r
13 rem GNU Emacs is distributed in the hope that it will be useful,\r
14 rem but WITHOUT ANY WARRANTY; without even the implied warranty of\r
15 rem MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
16 rem GNU General Public License for more details.\r
17 \r
18 rem You should have received a copy of the GNU General Public License\r
19 rem along with GNU Emacs. If not, see http://www.gnu.org/licenses/.\r
20 \r
21 rem ----------------------------------------------------------------------\r
22 rem YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:\r
23 rem\r
24 rem + msdos version 3 or better.\r
25 rem + DJGPP version 2.02 or later (version 2.03 or later recommended).\r
26 rem + make utility that allows breaking of the 128 chars limit on\r
27 rem command lines. ndmake (as of version 4.5) won't work due to a\r
28 rem line length limit. The DJGPP port of make works (and is\r
29 rem recommended).\r
30 rem + rm, mv, and cp (from GNU file utilities).\r
31 rem + sed (you can use the port that comes with DJGPP).\r
32 rem\r
33 rem You should be able to get all the above utilities from the DJGPP FTP\r
34 rem site, ftp.delorie.com, in the directory "pub/djgpp/current/v2gnu".\r
35 rem ----------------------------------------------------------------------\r
36 set X11=\r
37 set nodebug=\r
38 set djgpp_ver=\r
39 set sys_malloc=\r
40 set libxml=\r
41 if "%1" == "" goto usage\r
42 rem ----------------------------------------------------------------------\r
43 rem See if their environment is large enough. We need 28 bytes.\r
44 set $foo$=789012345678901234567\r
45 if not "%$foo$%" == "789012345678901234567" goto SmallEnv\r
46 set $foo$=\r
47 :again\r
48 if "%1" == "" goto usage\r
49 if "%1" == "--with-x" goto withx\r
50 if "%1" == "--no-debug" goto nodebug\r
51 if "%1" == "msdos" goto msdos\r
52 if "%1" == "--with-system-malloc" goto sysmalloc\r
53 :usage\r
54 echo Usage: config [--no-debug] [--with-system-malloc] [--with-x] msdos\r
55 echo [Read the script before you run it.]\r
56 goto end\r
57 rem ----------------------------------------------------------------------\r
58 :withx\r
59 set X11=Y\r
60 shift\r
61 goto again\r
62 rem ----------------------------------------------------------------------\r
63 :nodebug\r
64 set nodebug=Y\r
65 shift\r
66 goto again\r
67 rem ----------------------------------------------------------------------\r
68 :sysmalloc\r
69 set sys_malloc=Y\r
70 shift\r
71 goto again\r
72 rem ----------------------------------------------------------------------\r
73 :msdos\r
74 Echo Checking whether 'sed' is available...\r
75 sed -e "w junk.$$$" <Nul\r
76 If Exist junk.$$$ Goto sedOk\r
77 Echo To configure 'Emacs' you need to have 'sed'!\r
78 Goto End\r
79 :sedOk\r
80 Echo Checking whether 'rm' is available...\r
81 rm -f junk.$$$\r
82 If Not Exist junk.$$$ Goto rmOk\r
83 Echo To configure 'Emacs' you need to have 'rm'!\r
84 Goto End\r
85 :rmOk\r
86 Echo Checking whether 'mv' is available...\r
87 rm -f junk.1 junk.2\r
88 echo foo >junk.1\r
89 mv junk.1 ./junk.2\r
90 If Exist junk.2 Goto mvOk\r
91 Echo To configure 'Emacs' you need to have 'mv'!\r
92 rm -f junk.1\r
93 Goto End\r
94 :mvOk\r
95 rm -f junk.2\r
96 Echo Checking whether 'gcc' is available...\r
97 echo main(){} >junk.c\r
98 gcc -c junk.c\r
99 if exist junk.o goto gccOk\r
100 Echo To configure 'Emacs' you need to have 'gcc'!\r
101 rm -f junk.c\r
102 Goto End\r
103 :gccOk\r
104 rm -f junk.c junk.o junk junk.exe\r
105 Echo Checking what version of DJGPP is installed...\r
106 If Not "%DJGPP%" == "" goto djgppOk\r
107 Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r
108 Goto End\r
109 :djgppOk\r
110 echo int main() >junk.c\r
111 echo #ifdef __DJGPP__ >>junk.c\r
112 echo {return (__DJGPP__)*10 + (__DJGPP_MINOR__);} >>junk.c\r
113 echo #else >>junk.c\r
114 echo #ifdef __GO32__ >>junk.c\r
115 echo {return 10;} >>junk.c\r
116 echo #else >>junk.c\r
117 echo {return 0;} >>junk.c\r
118 echo #endif >>junk.c\r
119 echo #endif >>junk.c\r
120 gcc -o junk junk.c\r
121 if not exist junk.exe coff2exe junk\r
122 junk\r
123 If ErrorLevel 10 Goto go32Ok\r
124 rm -f junk.c junk junk.exe\r
125 Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r
126 Goto End\r
127 :go32Ok\r
128 set djgpp_ver=2\r
129 If Not ErrorLevel 22 Echo To build 'Emacs' you need DJGPP v2.02 or later!\r
130 If Not ErrorLevel 22 Goto End\r
131 rm -f junk.c junk junk.exe\r
132 rem DJECHO is used by the top-level Makefile in the v2.x build\r
133 Echo Checking whether 'djecho' is available...\r
134 redir -o Nul -eo djecho -o junk.$$$ foo\r
135 If Exist junk.$$$ Goto djechoOk\r
136 Echo To build 'Emacs' you need the 'djecho.exe' program!\r
137 Echo 'djecho.exe' is part of 'djdevNNN.zip' basic DJGPP development kit.\r
138 Echo Either unpack 'djecho.exe' from the 'djdevNNN.zip' archive,\r
139 Echo or, if you have 'echo.exe', copy it to 'djecho.exe'.\r
140 Echo Then run CONFIG.BAT again with the same arguments you did now.\r
141 Goto End\r
142 :djechoOk\r
143 rm -f junk.$$$\r
144 Echo Configuring for DJGPP Version %DJGPP_VER% ...\r
145 Rem ----------------------------------------------------------------------\r
146 Echo Configuring the source directory...\r
147 cd src\r
148 \r
149 rem Create "epaths.h"\r
150 sed -f ../msdos/sed4.inp <epaths.in >epaths.tmp\r
151 update epaths.tmp epaths.h >nul\r
152 rm -f epaths.tmp\r
153 \r
154 rem Create "config.h"\r
155 rm -f config.h2 config.tmp\r
156 if exist config.in sed -e '' config.in > config.tmp\r
157 if exist ..\msdos\autogen\config.in sed -e '' ../msdos/autogen/config.in > config.tmp\r
158 if "%X11%" == "" goto src4\r
159 if exist config.in sed -f ../msdos/sed2x.inp < config.in > config.tmp\r
160 if exist ..\msdos\autogen\config.in sed -f ../msdos/sed2x.inp < ..\msdos\autogen\config.in > config.tmp\r
161 :src4\r
162 sed -f ../msdos/sed2v2.inp <config.tmp >config.h2\r
163 Rem See if they have libxml2 later than v2.2.0 installed\r
164 Echo Checking whether libxml2 v2.2.1 or later is installed ...\r
165 rm -f junk.c junk.o junk junk.exe\r
166 rem Use djecho here because we need to quote brackets\r
167 djecho "#include <libxml/xmlversion.h>" >junk.c\r
168 djecho "int main()" >>junk.c\r
169 djecho "{return (LIBXML_VERSION > 20200 ? 0 : 1);}" >>junk.c\r
170 redir -o Nul -eo gcc -I/dev/env/DJDIR/include/libxml2 -o junk junk.c\r
171 if not exist junk Goto xmlDone\r
172 if not exist junk.exe coff2exe junk\r
173 junk\r
174 If ErrorLevel 1 Goto xmlDone\r
175 Echo Configuring with libxml2 ...\r
176 sed -e "/#undef HAVE_LIBXML2/s/^.*$/#define HAVE_LIBXML2 1/" <config.h2 >config.h3\r
177 sed -e "/#define EMACS_CONFIG_FEATURES/s/^.*$/#define EMACS_CONFIG_FEATURES \"LIBXML2\"/" <config.h3 >config.h2\r
178 set libxml=1\r
179 :xmlDone\r
180 rm -f junk.c junk junk.exe\r
181 Rem See if they requested a SYSTEM_MALLOC build\r
182 if "%sys_malloc%" == "" Goto cfgDone\r
183 rm -f config.tmp\r
184 ren config.h2 config.tmp\r
185 sed -f ../msdos/sedalloc.inp <config.tmp >config.h2\r
186 \r
187 :cfgDone\r
188 rm -f junk.c junk junk.exe\r
189 update config.h2 config.h >nul\r
190 rm -f config.tmp config.h2\r
191 \r
192 rem On my system dir.h gets in the way. It's a VMS file so who cares.\r
193 if exist dir.h ren dir.h vmsdir.h\r
194 \r
195 rem Create "makefile" from "makefile.in".\r
196 rm -f Makefile makefile.tmp\r
197 copy Makefile.in+deps.mk makefile.tmp\r
198 sed -f ../msdos/sed1v2.inp <makefile.tmp >Makefile\r
199 rm -f makefile.tmp\r
200 \r
201 if "%X11%" == "" goto src5\r
202 mv Makefile makefile.tmp\r
203 sed -f ../msdos/sed1x.inp <makefile.tmp >Makefile\r
204 rm -f makefile.tmp\r
205 :src5\r
206 \r
207 if "%sys_malloc%" == "" goto src5a\r
208 sed -e "/^GMALLOC_OBJ *=/s/gmalloc.o//" <Makefile >makefile.tmp\r
209 sed -e "/^VMLIMIT_OBJ *=/s/vm-limit.o//" <makefile.tmp >makefile.tmp2\r
210 sed -e "/^RALLOC_OBJ *=/s/ralloc.o//" <makefile.tmp2 >Makefile\r
211 rm -f makefile.tmp makefile.tmp2\r
212 :src5a\r
213 \r
214 if "%nodebug%" == "" goto src6\r
215 sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
216 sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile\r
217 rm -f makefile.tmp\r
218 :src6\r
219 \r
220 if "%libxml%" == "" goto src7\r
221 sed -e "/^LIBXML2_LIBS *=/s/=/= -lxml2 -lz -liconv/" <Makefile >makefile.tmp\r
222 sed -e "/^LIBXML2_CFLAGS *=/s|=|= -I/dev/env/DJDIR/include/libxml2|" <makefile.tmp >Makefile\r
223 rm -f makefile.tmp\r
224 :src7\r
225 cd ..\r
226 rem ----------------------------------------------------------------------\r
227 Echo Configuring the library source directory...\r
228 cd lib-src\r
229 sed -f ../msdos/sed3v2.inp <Makefile.in >Makefile\r
230 mv Makefile makefile.tmp\r
231 sed -n -e "/^AC_INIT/s/[^,]*, \([^,]*\).*/@set emver=\1/p" ../configure.ac > emver.bat\r
232 call emver.bat\r
233 sed -e "s/@version@/%emver%/g" <makefile.tmp >Makefile\r
234 if "%X11%" == "" goto libsrc2a\r
235 mv Makefile makefile.tmp\r
236 sed -f ../msdos/sed3x.inp <makefile.tmp >Makefile\r
237 rm -f makefile.tmp\r
238 :libsrc2a\r
239 if "%nodebug%" == "" goto libsrc3\r
240 sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
241 sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile\r
242 rm -f makefile.tmp\r
243 :libsrc3\r
244 cd ..\r
245 rem ----------------------------------------------------------------------\r
246 if "%X11%" == "" goto oldx1\r
247 Echo Configuring the oldxmenu directory...\r
248 cd oldxmenu\r
249 sed -f ../msdos/sed5x.inp <Makefile.in >Makefile\r
250 if "%nodebug%" == "" goto oldx2\r
251 sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
252 mv -f makefile.tmp Makefile\r
253 :oldx2\r
254 cd ..\r
255 :oldx1\r
256 rem ----------------------------------------------------------------------\r
257 Echo Configuring the doc directory, expect one "File not found" message...\r
258 cd doc\r
259 Rem Rename files like djtar on plain DOS filesystem would.\r
260 If Exist emacs\emacsver.texi.in update emacs/emacsver.texi.in emacs/emacsver.in\r
261 If Exist man\emacs.1.in update man/emacs.1.in man/emacs.in\r
262 If Exist ..\etc\refcards\emacsver.tex.in update ../etc/refcards/emacsver.tex.in ../etc/refcards/emacsver.in\r
263 Rem The two variants for lispintro below is for when the shell\r
264 Rem supports long file names but DJGPP does not\r
265 for %%d in (emacs lispref lispintro lispintr misc) do sed -e "s/@version@/%emver%/g" -f ../msdos/sed6.inp < %%d\Makefile.in > %%d\Makefile\r
266 Rem produce emacs.1 from emacs.in\r
267 If Exist man\emacs.1 goto manOk\r
268 sed -e "s/@version@/%emver%/g" -e "s/@PACKAGE_BUGREPORT@/bug-gnu-emacs@gnu.org/g" < man\emacs.in > man\emacs.1\r
269 :manOk\r
270 cd ..\r
271 rem ----------------------------------------------------------------------\r
272 Echo Configuring the lib directory...\r
273 If Exist build-aux\snippet\c++defs.h update build-aux/snippet/c++defs.h build-aux/snippet/cxxdefs.h\r
274 cd lib\r
275 Rem Rename files like djtar on plain DOS filesystem would.\r
276 If Exist alloca.in.h update alloca.in.h alloca.in-h\r
277 If Exist byteswap.in.h update byteswap.in.h byteswap.in-h\r
278 If Exist dirent.in.h update dirent.in.h dirent.in-h\r
279 If Exist errno.in.h update errno.in.h errno.in-h\r
280 If Exist execinfo.in.h update execinfo.in.h execinfo.in-h\r
281 If Exist fcntl.in.h update fcntl.in.h fcntl.in-h\r
282 If Exist getopt.in.h update getopt.in.h getopt.in-h\r
283 If Exist inttypes.in.h update inttypes.in.h inttypes.in-h\r
284 If Exist stdarg.in.h update stdarg.in.h stdarg.in-h\r
285 If Exist stdalign.in.h update stdalign.in.h stdalign.in-h\r
286 If Exist stdbool.in.h update stdbool.in.h stdbool.in-h\r
287 If Exist signal.in.h update signal.in.h signal.in-h\r
288 If Exist stdalign.in.h update stdalign.in.h stdalign.in-h\r
289 If Exist stddef.in.h update stddef.in.h stddef.in-h\r
290 If Exist stdint.in.h update stdint.in.h stdint.in-h\r
291 If Exist stdio.in.h update stdio.in.h stdio.in-h\r
292 If Exist stdlib.in.h update stdlib.in.h stdlib.in-h\r
293 If Exist string.in.h update string.in.h string.in-h\r
294 If Exist sys_select.in.h update sys_select.in.h sys_select.in-h\r
295 If Exist sys_stat.in.h update sys_stat.in.h sys_stat.in-h\r
296 If Exist sys_types.in.h update sys_types.in.h sys_types.in-h\r
297 If Exist sys_time.in.h update sys_time.in.h sys_time.in-h\r
298 If Exist time.in.h update time.in.h time.in-h\r
299 If Exist unistd.in.h update unistd.in.h unistd.in-h\r
300 Rem Only repository has the msdos/autogen directory\r
301 If Exist Makefile.in sed -f ../msdos/sedlibcf.inp < Makefile.in > makefile.tmp\r
302 If Exist ..\msdos\autogen\Makefile.in sed -f ../msdos/sedlibcf.inp < ..\msdos\autogen\Makefile.in > makefile.tmp\r
303 sed -f ../msdos/sedlibmk.inp < makefile.tmp > Makefile\r
304 rm -f makefile.tmp\r
305 Rem Create .Po files for new files in lib/\r
306 If Not Exist deps\stamp mkdir deps\r
307 for %%f in (*.c) do @call ..\msdos\depfiles.bat %%f\r
308 echo deps-stamp > deps\stamp\r
309 cd ..\r
310 rem ----------------------------------------------------------------------\r
311 Echo Configuring the lisp directory...\r
312 cd lisp\r
313 If Exist gnus\.dir-locals.el update gnus/.dir-locals.el gnus/_dir-locals.el\r
314 sed -f ../msdos/sedlisp.inp < Makefile.in > Makefile\r
315 cd ..\r
316 rem ----------------------------------------------------------------------\r
317 Echo Configuring the leim directory...\r
318 cd leim\r
319 sed -f ../msdos/sedleim.inp < Makefile.in > Makefile\r
320 cd ..\r
321 rem ----------------------------------------------------------------------\r
322 If Not Exist admin\unidata goto noadmin\r
323 Echo Configuring the admin/unidata directory...\r
324 cd admin\unidata\r
325 sed -f ../../msdos/sedadmin.inp < Makefile.in > Makefile\r
326 Echo Configuring the admin/charsets directory...\r
327 cd ..\charsets\r
328 sed -f ../../msdos/sedadmin.inp < Makefile.in > Makefile\r
329 Echo Configuring the admin/grammars directory...\r
330 cd ..\grammars\r
331 sed -f ../../msdos/sedadmin.inp < Makefile.in > Makefile\r
332 cd ..\..\r
333 :noadmin\r
334 rem ----------------------------------------------------------------------\r
335 Echo Configuring the main directory...\r
336 If Exist .dir-locals.el update .dir-locals.el _dir-locals.el\r
337 If Exist src\.dbxinit update src/.dbxinit src/_dbxinit\r
338 Echo Looking for the GDB init file...\r
339 If Exist src\.gdbinit update src/.gdbinit src/_gdbinit\r
340 If Exist src\_gdbinit goto gdbinitOk\r
341 Echo ERROR:\r
342 Echo I cannot find the GDB init file. It was called ".gdbinit" in\r
343 Echo the Emacs distribution, but was probably renamed to some other\r
344 Echo name without the leading dot when you untarred the archive.\r
345 Echo It should be in the "src/" subdirectory. Please make sure this\r
346 Echo file exists and is called "_gdbinit" with a leading underscore.\r
347 Echo Then run CONFIG.BAT again with the same arguments you did now.\r
348 goto End\r
349 :gdbinitOk\r
350 Echo Looking for the GDB init file...found\r
351 rem GNUMakefile is not appropriate for MS-DOS so move it out of the way\r
352 If Exist GNUmakefile mv -f GNUmakefile GNUmakefile.unix\r
353 copy msdos\mainmake.v2 Makefile >nul\r
354 rem ----------------------------------------------------------------------\r
355 goto End\r
356 :SmallEnv\r
357 echo Your environment size is too small. Please enlarge it and run me again.\r
358 echo For example, type "command.com /e:2048" to have 2048 bytes available.\r
359 set $foo$=\r
360 :end\r
361 set X11=\r
362 set nodebug=\r
363 set djgpp_ver=\r
364 set sys_malloc=\r
365 set libxml=\r
366 set emver=\r