Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   6 #  2000, 2001, 2002 Free Software Foundation, Inc.
   7
   8 # This file is part of GNU Emacs.
   9
  10 # GNU Emacs is free software; you can redistribute it and/or modify
  11 # it under the terms of the GNU General Public License as published by
  12 # the Free Software Foundation; either version 2, or (at your option)
  13 # any later version.
  14
  15 # GNU Emacs is distributed in the hope that it will be useful,
  16 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18 # GNU General Public License for more details.
  19
  20 # You should have received a copy of the GNU General Public License
  21 # along with GNU Emacs; see the file COPYING.  If not, write to
  22 # the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
  23 # Boston, MA 02111-1307, USA.
  24
  25 # make all      to compile and build Emacs.
  26 # make install  to install it.
  27 # make TAGS     to update tags tables.
  28 #
  29 # make clean  or  make mostlyclean
  30 #      Delete all files from the current directory that are normally
  31 #      created by building the program.  Don't delete the files that
  32 #      record the configuration.  Also preserve files that could be made
  33 #      by building, but normally aren't because the distribution comes
  34 #      with them.
  35 #
  36 #      Delete `.dvi' files here if they are not part of the distribution.
  37 #
  38 # make distclean
  39 #      Delete all files from the current directory that are created by
  40 #      configuring or building the program.  If you have unpacked the
  41 #      source and built the program without creating any other files,
  42 #      `make distclean' should leave only the files that were in the
  43 #      distribution.
  44 #
  45 # make maintainer-clean
  46 #      Delete everything from the current directory that can be
  47 #      reconstructed with this Makefile.  This typically includes
  48 #      everything deleted by distclean, plus more: C source files
  49 #      produced by Bison, tags tables, info files, and so on.
  50 #
  51 # make extraclean
  52 #      Still more severe - delete backup and autosave files, too.
  53
  54 SHELL = /bin/sh
  55
  56 # If Make doesn't predefine MAKE, set it here.
  57 @SET_MAKE@
  58
  59 # ==================== Things `configure' Might Edit ====================
  60
  61 CC=@CC@
  62 CPP=@CPP@
  63 C_SWITCH_SYSTEM=@c_switch_system@
  64 ALLOCA=@ALLOCA@
  65 LN_S=@LN_S@
  66 CFLAGS=@CFLAGS@
  67 LDFLAGS=@LDFLAGS@
  68 CPPFLAGS=@CPPFLAGS@
  69 C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
  70 LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
  71 YACC=@YACC@
  72
  73 ### These help us choose version- and architecture-specific directories
  74 ### to install files in.
  75
  76 ### This should be the number of the Emacs version we're building,
  77 ### like `18.59' or `19.0'.
  78 version=@version@
  79
  80 ### This should be the name of the configuration we're building Emacs
  81 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  82 configuration=@configuration@
  83
  84 # ==================== Where To Install Things ====================
  85
  86 # The default location for installation.  Everything is placed in
  87 # subdirectories of this directory.  The default values for many of
  88 # the variables below are expressed in terms of this one, so you may
  89 # not need to change them.  This defaults to /usr/local.
  90 prefix=@prefix@
  91
  92 # Like `prefix', but used for architecture-specific files.
  93 exec_prefix=@exec_prefix@
  94
  95 # Where to install Emacs and other binaries that people will want to
  96 # run directly (like etags).
  97 bindir=@bindir@
  98
  99 # Where to install architecture-independent data files.  ${lispdir}
 100 # and ${etcdir} are subdirectories of this.
 101 datadir=@datadir@
 102
 103 # Where to install and expect the files that Emacs modifies as it
 104 # runs.  These files are all architecture-independent.
 105 # Right now, this is not used.
 106 sharedstatedir=@sharedstatedir@
 107
 108 # Where to install and expect executable files to be run by Emacs
 109 # rather than directly by users, and other architecture-dependent
 110 # data.  ${archlibdir} is a subdirectory of this.
 111 libexecdir=@libexecdir@
 112
 113 # Where to install Emacs's man pages, and what extension they should have.
 114 mandir=@mandir@
 115 manext=.1
 116 man1dir=$(mandir)/man1
 117
 118 # Where to install and expect the info files describing Emacs.  In the
 119 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
 120 # since there are now many packages documented with the texinfo
 121 # system, it is inappropriate to imply that it is part of Emacs.
 122 infodir=@infodir@
 123
 124 # Directory for local state files for all programs.
 125 localstatedir=@localstatedir@
 126
 127 # Where to look for bitmap files.
 128 bitmapdir=@bitmapdir@
 129
 130 # Where to find the source code.  The source code for Emacs's C kernel is
 131 # expected to be in ${srcdir}/src, and the source code for Emacs's
 132 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 133 # set by the configure script's `--srcdir' option.
 134
 135 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 136 srcdir=@srcdir@
 137
 138 # Tell make where to find source files; this is needed for the makefiles.
 139 VPATH=@srcdir@
 140
 141 # Where to find the application default.
 142 x_default_search_path=@x_default_search_path@
 143
 144 # ==================== Emacs-specific directories ====================
 145
 146 # These variables hold the values Emacs will actually use.  They are
 147 # based on the values of the standard Make variables above.
 148
 149 # Where to install the lisp files distributed with
 150 # Emacs.  This includes the Emacs version, so that the
 151 # lisp files for different versions of Emacs will install
 152 # themselves in separate directories.
 153 lispdir=@lispdir@
 154
 155 # Directories Emacs should search for lisp files specific
 156 # to this site (i.e. customizations), before consulting
 157 # ${lispdir}.  This should be a colon-separated list of
 158 # directories.
 159 locallisppath=@locallisppath@
 160
 161 # Where Emacs will search to find its lisp files.  Before
 162 # changing this, check to see if your purpose wouldn't
 163 # better be served by changing locallisppath.  This
 164 # should be a colon-separated list of directories.
 165 lisppath=@lisppath@
 166
 167 # Where Emacs will search for its lisp files while
 168 # building.  This is only used during the process of
 169 # compiling Emacs, to help Emacs find its lisp files
 170 # before they've been installed in their final location.
 171 # It's usually identical to lisppath, except that
 172 # it does not include locallisppath, and the
 173 # entry for the directory containing the installed lisp
 174 # files has been replaced with ../lisp.  This should be a
 175 # colon-separated list of directories.
 176 buildlisppath=${srcdir}/lisp
 177
 178 # Where to install the other architecture-independent
 179 # data files distributed with Emacs (like the tutorial,
 180 # the cookie recipes and the Zippy database). This path
 181 # usually contains the Emacs version number, so the data
 182 # files for multiple versions of Emacs may be installed
 183 # at once.
 184 etcdir=@etcdir@
 185
 186 # Where to put executables to be run by Emacs rather than
 187 # the user.  This path usually includes the Emacs version
 188 # and configuration name, so that multiple configurations
 189 # for multiple versions of Emacs may be installed at
 190 # once.
 191 archlibdir=@archlibdir@
 192
 193 # Where to put the docstring file.
 194 docdir=@docdir@
 195
 196 # Where to install Emacs game score files.
 197 gamedir=@gamedir@
 198
 199 # ==================== Utility Programs for the Build ====================
 200
 201 # Allow the user to specify the install program.
 202 INSTALL = @INSTALL@
 203 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 204 INSTALL_DATA = @INSTALL_DATA@
 205 INSTALL_INFO = install-info
 206 # By default, we uphold the dignity of our programs.
 207 INSTALL_STRIP =
 208
 209 # ============================= Targets ==============================
 210
 211 # Program name transformation.
 212 TRANSFORM = @program_transform_name@
 213
 214 # What emacs should be called when installed.
 215 EMACS = `echo emacs | sed '$(TRANSFORM)'`
 216 EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`
 217
 218 # Subdirectories to make recursively.  `lisp' is not included
 219 # because the compiled lisp files are part of the distribution.
 220 # leim is not included because it needs special handling.
 221 SUBDIR = lib-src src
 222
 223 # The makefiles of the directories in $SUBDIR.
 224 SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile lispref/Makefile lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile
 225
 226 # Subdirectories to install, and where they'll go.
 227 # lib-src's makefile knows how to install it, so we don't do that here.
 228 # leim's makefile also knows how to install it, so we don't do that here.
 229 # When installing the info files, we need to do special things to
 230 # avoid nuking an existing dir file, so we don't do that here;
 231 # instead, we have written out explicit code in the `install' targets.
 232 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 233 COPYDESTS = ${etcdir} ${lispdir}
 234
 235 # Set to FRC to force running autoconf and autoheader
 236 MAINT =
 237
 238 all: ${SUBDIR} leim
 239
 240 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
 241
 242 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 243 epaths-force: FRC
 244         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 245           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 246           x_default_search_path=`echo ${x_default_search_path}`; \
 247           gamedir=`echo ${gamedir}`; \
 248           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 249           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";'        \
 250           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
 251           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 252           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 253           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 254           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 255           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 256           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 257           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') &&                \
 258         ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
 259
 260 # For parallel make, src should be build before leim.
 261 # "export PARALLEL=0" is for SGI's Make, to prevent it from
 262 # running more than 1 process in the leim directory, especially for
 263 # the $TIT files there.
 264 leim:   src ${SUBDIR_MAKEFILES} FRC
 265         (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
 266           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 267           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
 268
 269 src:    lib-src FRC
 270
 271 lib-src: FRC src/config.stamp
 272
 273 .RECURSIVE: ${SUBDIR} leim
 274
 275 ${SUBDIR}: maybe_bootstrap ${SUBDIR_MAKEFILES} FRC
 276         cd $@; $(MAKE) all $(MFLAGS) \
 277           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 278           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 279
 280 blessmail: ${SUBDIR_MAKEFILES} src FRC
 281         cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
 282           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 283
 284 Makefile: $(srcdir)/Makefile.in config.status
 285         ./config.status
 286
 287 config.status: ${srcdir}/configure
 288         ./config.status --recheck
 289
 290 ${srcdir}/configure: $(MAINT)
 291         cd ${srcdir} && autoconf
 292
 293 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 294         @true
 295 $(srcdir)/src/stamp-h.in: $(MAINT)
 296         cd ${srcdir} && autoheader
 297         rm -f $(srcdir)/src/stamp-h.in
 298         echo timestamp > $(srcdir)/src/stamp-h.in
 299
 300 src/Makefile: $(srcdir)/src/Makefile.in config.status
 301         ./config.status
 302
 303 src/config.stamp: $(srcdir)/src/config.in config.status
 304         ./config.status
 305         touch src/config.stamp
 306
 307 lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status
 308         ./config.status
 309
 310 man/Makefile: $(srcdir)/man/Makefile.in config.status
 311         ./config.status
 312
 313 lispref/Makefile: $(srcdir)/lispref/Makefile.in config.status
 314         ./config.status
 315
 316 lispintro/Makefile: $(srcdir)/lispintro/Makefile.in config.status
 317         ./config.status
 318
 319 oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status
 320         ./config.status
 321
 322 lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status
 323         ./config.status
 324
 325 leim/Makefile: $(srcdir)/leim/Makefile.in config.status
 326         ./config.status
 327
 328 # ==================== Installation ====================
 329
 330 ## If we let lib-src do its own installation, that means we
 331 ## don't have to duplicate the list of utilities to install in
 332 ## this Makefile as well.
 333
 334 ## On AIX, use tar xBf.
 335 ## On Xenix, use tar xpf.
 336
 337 .PHONY: install mkdir
 338
 339 ## We delete each directory in ${COPYDESTS} before we copy into it;
 340 ## that way, we can reinstall over directories that have been put in
 341 ## place with their files read-only (perhaps because they are checked
 342 ## into RCS).  In order to make this safe, we make sure that the
 343 ## source exists and is distinct from the destination.
 344 ### We do install-arch-indep first because
 345 ### the executable needs the Lisp files and DOC file to work properly.
 346 install: all install-arch-indep install-arch-dep install-leim blessmail
 347         @true
 348
 349 ### Install the executables that were compiled specifically for this machine.
 350 ### It would be nice to do something for a parallel make
 351 ### to ensure that install-arch-indep finishes before this starts.
 352 install-arch-dep: mkdir
 353         (cd lib-src; \
 354           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 355             exec_prefix=${exec_prefix} bindir=${bindir} \
 356             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 357             INSTALL_STRIP=${INSTALL_STRIP})
 358         ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs ${bindir}/$(EMACSFULL)
 359         -chmod 1755  ${bindir}/$(EMACSFULL)
 360         rm -f ${bindir}/$(EMACS)
 361         -ln ${bindir}/$(EMACSFULL) ${bindir}/$(EMACS)
 362         -unset CDPATH; \
 363         for f in `cd lib-src && echo fns-*.el`; do \
 364           if test -r lib-src/$$f ; then \
 365             ${INSTALL_DATA} lib-src/$$f ${archlibdir}/$$f; \
 366           else true; fi ; \
 367         done
 368
 369 ### Install the files that are machine-independent.
 370 ### Most of them come straight from the distribution;
 371 ### the exception is the DOC-* files, which are copied
 372 ## from the build directory.
 373
 374 ## Note that we copy DOC* and then delete DOC
 375 ## as a workaround for a bug in tar on Ultrix 4.2.
 376
 377 ## If people complain about the h flag in tar command, take that out.
 378 ## That flag is also used in leim/Makefile.in
 379 install-arch-indep: mkdir info
 380         -set ${COPYDESTS} ; \
 381         unset CDPATH; \
 382         for dir in ${COPYDIR} ; do \
 383           if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
 384             rm -rf $$1 ; \
 385           fi ; \
 386           shift ; \
 387         done
 388         -set ${COPYDESTS} ; \
 389         mkdir ${COPYDESTS} ; \
 390         chmod ugo+rx ${COPYDESTS} ; \
 391         unset CDPATH; \
 392         for dir in ${COPYDIR} ; do \
 393           dest=$$1 ; shift ; \
 394           [ -d $${dir} ] \
 395           && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
 396           && (echo "Copying $${dir} to $${dest}..." ; \
 397               (cd $${dir}; tar -chf - . ) \
 398                 | (cd $${dest}; umask 022; \
 399                    tar -xvf - && cat > /dev/null) || exit 1; \
 400               find $${dest} -exec chown $$LOGNAME {} ';' ;\
 401               for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \
 402                 chmod a+rx $${subdir} ; \
 403                 rm -rf $${subdir}/RCS ; \
 404                 rm -rf $${subdir}/CVS ; \
 405                 rm -f  $${subdir}/.cvsignore ; \
 406                 rm -f  $${subdir}/\#* ; \
 407                 rm -f  $${subdir}/.\#* ; \
 408                 rm -f  $${subdir}/*~ ; \
 409                 rm -f  $${subdir}/*.orig ; \
 410                 rm -f  $${subdir}/[mM]akefile* ; \
 411                 rm -f  $${subdir}/ChangeLog* ; \
 412                 rm -f  $${subdir}/dired.todo ; \
 413               done) ; \
 414         done
 415         -rm -f ${lispdir}/subdirs.el
 416         $(srcdir)/update-subdirs ${lispdir}
 417         if [ -f ${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
 418         then true; \
 419         else \
 420           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 421            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 422             > ${datadir}/emacs/${version}/site-lisp/subdirs.el; \
 423         fi
 424         chmod a+r ${datadir}/emacs/${version}/site-lisp/subdirs.el
 425         -if [ -f ${datadir}/emacs/site-lisp/subdirs.el ]; \
 426         then true; \
 427         else \
 428           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 429            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 430             > ${datadir}/emacs/site-lisp/subdirs.el; \
 431         fi
 432         -chmod a+r ${datadir}/emacs/site-lisp/subdirs.el
 433         -unset CDPATH; \
 434         if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
 435         then \
 436            echo "Copying etc/DOC-* to ${docdir} ..." ; \
 437            (cd ./etc; tar -chf - DOC*) \
 438              |(cd ${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 439            (cd $(docdir); chown $${LOGNAME} DOC*; chmod a+r DOC*; \
 440             if test "`echo DOC-*`" != "DOC-*"; then rm DOC; fi); \
 441         else true; fi
 442         -unset CDPATH; \
 443         if [ -r ${srcdir}/lisp ] \
 444            && [ -r ${srcdir}/lisp/simple.el ] \
 445            && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ${lispdir}; /bin/pwd)` ]; \
 446         then \
 447            echo "Copying lisp/*.el and lisp/*.elc to ${lispdir} ..." ; \
 448            (cd ${srcdir}/lisp; tar -chf - *.el *.elc) \
 449              |(cd ${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 450            (cd ${lispdir}; find . -exec chown $${LOGNAME} {} ';') ; \
 451         else true; fi
 452         -unset CDPATH; \
 453         thisdir=`/bin/pwd`; \
 454         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
 455         then \
 456           (cd ${infodir};  \
 457            if [ -f dir ]; then true; \
 458            else \
 459              (cd $${thisdir}; \
 460               ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir; \
 461               chmod a+r ${infodir}/dir); \
 462            fi; \
 463            cd ${srcdir}/info ; \
 464            for f in ada-mode* autotype* calc* ccmode* cl* dired-x* ebrowse* ediff* efaq* eintr* elisp* emacs* eshell* eudc* forms* gnus* idlwave* info* message* mh-e* pcl-cvs* reftex* sc* speedbar* tramp* vip* widget* woman*; do \
 465              (cd $${thisdir}; \
 466               ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f; \
 467               chmod a+r ${infodir}/$$f); \
 468            done); \
 469         else true; fi
 470         -unset CDPATH; \
 471         thisdir=`/bin/pwd`; \
 472         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
 473         then \
 474           for f in ada-mode autotype calc ccmode cl dired-x ebrowse ediff efaq elisp eintr emacs emacs-mime eshell eudc forms gnus idlwave info message mh-e pcl-cvs reftex sc speedbar tramp vip viper widget woman; do \
 475             (cd $${thisdir}; \
 476              ${INSTALL_INFO} --info-dir=${infodir} ${infodir}/$$f); \
 477           done; \
 478         else true; fi
 479         -chmod -R a+r ${datadir}/emacs ${COPYDESTS} ${infodir}
 480         thisdir=`/bin/pwd`; \
 481         cd ${srcdir}/etc; \
 482         for page in emacs emacsclient etags ctags ; do \
 483           (cd $${thisdir}; \
 484            ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${man1dir}/$${page}${manext}; \
 485            chmod a+r ${man1dir}/$${page}${manext}); \
 486         done
 487
 488 ### Install LEIM files.  Although they are machine-independent, we
 489 ### have separate target here instead of including it in
 490 ### `install-arch-indep'.  People who extracted LEIM files after they
 491 ### insalled Emacs itself can install only LEIM files by this target.
 492 install-leim: leim/Makefile mkdir
 493         cd leim; $(MAKE) install
 494
 495 ### Build Emacs and install it, stripping binaries while installing them.
 496 install-strip:
 497         $(MAKE) INSTALL_STRIP=-s install
 498
 499 ### Build all the directories we're going to install Emacs in.  Since
 500 ### we may be creating several layers of directories (for example,
 501 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
 502 ### instead of mkdir.  Not all systems' mkdir programs have the `-p' flag.
 503 mkdir: FRC
 504         if [ -d ${datadir} ]; then true; else \
 505           $(srcdir)/mkinstalldirs ${datadir}; \
 506           chmod a+r ${datadir};\
 507         fi
 508         $(srcdir)/mkinstalldirs ${COPYDESTS} ${infodir} ${man1dir} \
 509           ${bindir} ${docdir} ${libexecdir} \
 510           ${datadir}/emacs/site-lisp \
 511           ${datadir}/emacs/${version}/site-lisp \
 512           `echo ${locallisppath} | sed 's/:/ /g'`
 513
 514 ### Delete all the installed files that the `install' target would
 515 ### create (but not the noninstalled files such as `make all' would
 516 ### create).
 517 ###
 518 ### Don't delete the lisp and etc directories if they're in the source tree.
 519 uninstall:
 520         (cd lib-src;                                    \
 521          $(MAKE) $(MFLAGS) uninstall                    \
 522             prefix=${prefix} exec_prefix=${exec_prefix} \
 523             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
 524         -unset CDPATH; \
 525         for dir in ${lispdir} ${etcdir} ; do            \
 526           if [ -d $${dir} ]; then                       \
 527             case `(cd $${dir} ; /bin/pwd)` in           \
 528               `(cd ${srcdir} ; /bin/pwd)`* ) ;;         \
 529               * ) rm -rf $${dir} ;;                     \
 530             esac ;                                      \
 531             case $${dir} in                             \
 532               ${datadir}/emacs/${version}/* )           \
 533                 rm -rf ${datadir}/emacs/${version}      \
 534               ;;                                        \
 535             esac ;                                      \
 536           fi ;                                          \
 537         done
 538         (cd ${archlibdir} && rm -f fns-*)
 539         -rm -rf ${libexecdir}/emacs/${version}
 540         (cd ${infodir} && rm -f cl* ada-mode* autotype* calc* ccmode* ebrowse* efaq* eintr elisp* eshell* eudc* idlwave* message* pcl-cvs* reftex* speedbar* tramp* widget* woman* dired-x* ediff* emacs* forms* gnus* info* mh-e* sc* vip*)
 541         (cd ${man1dir}  && rm -f emacs${manext} emacsclient${manext} etags${manext} ctags${manext})
 542         (cd ${bindir}  && rm -f $(EMACSFULL) $(EMACS))
 543
 544
 545 FRC:
 546
 547 # ==================== Cleaning up and miscellanea ====================
 548
 549 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
 550
 551 ### `mostlyclean'
 552 ###      Like `clean', but may refrain from deleting a few files that people
 553 ###      normally don't want to recompile.  For example, the `mostlyclean'
 554 ###      target for GCC does not delete `libgcc.a', because recompiling it
 555 ###      is rarely necessary and takes a lot of time.
 556 mostlyclean: FRC
 557         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 558         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 559         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 560         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 561         -(cd man &&   $(MAKE) $(MFLAGS) mostlyclean)
 562         -(cd lispref &&   $(MAKE) $(MFLAGS) mostlyclean)
 563         -(cd lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)
 564         (cd leim;     $(MAKE) $(MFLAGS) mostlyclean)
 565
 566 ### `clean'
 567 ###      Delete all files from the current directory that are normally
 568 ###      created by building the program.  Don't delete the files that
 569 ###      record the configuration.  Also preserve files that could be made
 570 ###      by building, but normally aren't because the distribution comes
 571 ###      with them.
 572 ###
 573 ###      Delete `.dvi' files here if they are not part of the distribution.
 574 clean: FRC
 575         (cd src;      $(MAKE) $(MFLAGS) clean)
 576         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 577         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 578         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 579         -(cd man &&   $(MAKE) $(MFLAGS) clean)
 580         -(cd lispref &&   $(MAKE) $(MFLAGS) clean)
 581         -(cd lispintro &&   $(MAKE) $(MFLAGS) clean)
 582         (cd leim;     $(MAKE) $(MFLAGS) clean)
 583
 584 ### `distclean'
 585 ###      Delete all files from the current directory that are created by
 586 ###      configuring or building the program.  If you have unpacked the
 587 ###      source and built the program without creating any other files,
 588 ###      `make distclean' should leave only the files that were in the
 589 ###      distribution.
 590 top_distclean=\
 591         rm -f config.status config.cache config.log ; \
 592         rm -f Makefile ${SUBDIR_MAKEFILES} ; \
 593         if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi
 594 distclean: FRC
 595         (cd src;      $(MAKE) $(MFLAGS) distclean)
 596         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 597         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 598         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 599         (cd man &&    $(MAKE) $(MFLAGS) distclean)
 600         (cd lispref &&    $(MAKE) $(MFLAGS) distclean)
 601         (cd lispintro &&    $(MAKE) $(MFLAGS) distclean)
 602         (cd leim;     $(MAKE) $(MFLAGS) distclean)
 603         (cd lisp;     $(MAKE) $(MFLAGS) distclean)
 604         ${top_distclean}
 605
 606 ### `maintainer-clean'
 607 ###      Delete everything from the current directory that can be
 608 ###      reconstructed with this Makefile.  This typically includes
 609 ###      everything deleted by distclean, plus more: C source files
 610 ###      produced by Bison, tags tables, info files, and so on.
 611 ###
 612 ###      One exception, however: `make maintainer-clean' should not delete
 613 ###      `configure' even if `configure' can be remade using a rule in the
 614 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 615 ###      anything that needs to exist in order to run `configure' and then
 616 ###      begin to build the program.
 617 maintainer-clean: FRC
 618         (cd src;      $(MAKE) $(MFLAGS) maintainer-clean)
 619         (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
 620         (cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)
 621         (cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)
 622         -(cd man &&   $(MAKE) $(MFLAGS) maintainer-clean)
 623         -(cd lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)
 624         -(cd lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)
 625         (cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)
 626         ${top_distclean}
 627
 628 ### This doesn't actually appear in the coding standards, but Karl
 629 ### says GCC supports it, and that's where the configuration part of
 630 ### the coding standards seem to come from.  It's like distclean, but
 631 ### it deletes backup and autosave files too.
 632 extraclean:
 633         for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 634         ${top_distclean}
 635         -rm -f config-tmp-*
 636         -rm -f *~ \#*
 637
 638 ### Unlocking and relocking.  The idea of these productions is to reduce
 639 ### hassles when installing an incremental tar of Emacs.  Do `make unlock'
 640 ### before unlocking the file to take the write locks off all sources so
 641 ### that tar xvof will overwrite them without fuss.  Then do `make relock'
 642 ### afterward so that VC mode will know which files should be checked in
 643 ### if you want to mung them.
 644 ###
 645 ### Note: it's no disaster if these productions miss a file or two; tar
 646 ### and VC will swiftly let you know if this happens, and it is easily
 647 ### corrected.
 648 SOURCES = ChangeLog FTP INSTALL Makefile.in \
 649         README configure make-dist move-if-change
 650
 651 .PHONY: unlock relock
 652
 653 unlock:
 654         chmod u+w $(SOURCES)
 655         -(cd elisp; chmod u+w Makefile README *.texi)
 656         (cd etc; $(MAKE) $(MFLAGS) unlock)
 657         (cd lib-src; $(MAKE) $(MFLAGS) unlock)
 658         (cd lisp; $(MAKE) $(MFLAGS) unlock)
 659         (cd lisp/term; chmod u+w README *.el)
 660         (cd man; chmod u+w *texi* ChangeLog split-man)
 661         (cd lispref; chmod u+w *texi* ChangeLog)
 662         (cd lispintro; chmod u+w *texi* ChangeLog)
 663         (cd oldXMenu; chmod u+w *.[ch] Makefile README)
 664         (cd lwlib; chmod u+w *.[ch] Makefile README)
 665         (cd src; $(MAKE) $(MFLAGS) unlock)
 666
 667 relock:
 668         chmod u-w $(SOURCES)
 669         -(cd elisp; chmod u-w Makefile README *.texi)
 670         (cd etc; $(MAKE) $(MFLAGS) relock)
 671         (cd lib-src; $(MAKE) $(MFLAGS) relock)
 672         (cd lisp; $(MAKE) $(MFLAGS) relock)
 673         (cd lisp/term; chmod u+w README *.el)
 674         (cd man; chmod u+w *texi* ChangeLog split-man)
 675         (cd lispref; chmod u+w *texi* ChangeLog)
 676         (cd lispintro; chmod u+w *texi* ChangeLog)
 677         (cd oldXMenu; chmod u+w *.[ch] Makefile README)
 678         (cd lwlib; chmod u+w *.[ch] Makefile README)
 679         (cd src; $(MAKE) $(MFLAGS) relock)
 680
 681 # The src subdir knows how to do the right thing
 682 # even when the build directory and source dir are different.
 683 TAGS tags: lib-src src
 684         cd src; $(MAKE) tags
 685
 686 check:
 687         @echo "We don't have any tests for GNU Emacs yet."
 688
 689 dist:
 690         cd ${srcdir}; ./make-dist
 691
 692 .PHONY: info dvi dist check html
 693 force-info:
 694 # Note that man/Makefile knows how to
 695 # put the info files in $(srcdir),
 696 # so we can do ok running make in the build dir.
 697 info: force-info
 698         (cd man; $(MAKE) $(MFLAGS) info)
 699         (cd lispref; $(MAKE) $(MFLAGS) info)
 700         (cd lispintro; $(MAKE) $(MFLAGS) info)
 701 dvi:
 702         (cd man; $(MAKE) $(MFLAGS) dvi)
 703         (cd lispref; $(MAKE) $(MFLAGS) elisp.dvi)
 704         (cd lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
 705
 706 #### Bootstrapping.
 707
 708 ### This is meant for Emacs maintainers only.  It first cleans the
 709 ### lisp subdirectory, removing all compiled Lisp files.  Then a
 710 ### special emacs executable is built from Lisp sources, which is then
 711 ### used to compile Lisp files.  The last step is a "normal" make.
 712
 713 .PHONY: bootstrap
 714 .PHONY: maybe_bootstrap
 715
 716 maybe_bootstrap:
 717         @bar="`echo $(srcdir)/lisp/*.elc`"; \
 718         if [ \( "$$bar" = '$(srcdir)/lisp/*.elc' \) -o \( "$$bar" = '' \) ]; then \
 719           echo "Your tree does not include the compiled Lisp files."; \
 720           echo "You need to do \`make bootstrap' to build Emacs."; \
 721           echo "Emacs now requires Texinfo version 4.2."; \
 722           exit 1;\
 723         fi
 724
 725 bootstrap: bootstrap-clean-before info FRC
 726         (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean)
 727         (cd src; $(MAKE) $(MFLAGS) bootstrap)
 728         (cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs)
 729         (cd src; $(MAKE) $(MFLAGS) mostlyclean)
 730         $(MAKE) $(MFLAGS) all
 731
 732 ### Used for `bootstrap' to avoid deleting existing dumped Emacs executables.
 733 bootstrap-clean-before: FRC
 734         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 735         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 736         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 737         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 738         -(cd man &&   $(MAKE) $(MFLAGS) clean)
 739         -(cd lispref &&   $(MAKE) $(MFLAGS) clean)
 740         -(cd lispintro &&   $(MAKE) $(MFLAGS) clean)
 741         (cd leim;     $(MAKE) $(MFLAGS) clean)
 742