Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # Copyright (C) 1992,93,94,95,96,97,98,1999,2000,01,02,03,04,2005
   6 #   Free Software Foundation, Inc.
   7
   8 # This file is part of GNU Emacs.
   9
  10 # GNU Emacs is free software; you can redistribute it and/or modify
  11 # it under the terms of the GNU General Public License as published by
  12 # the Free Software Foundation; either version 2, or (at your option)
  13 # any later version.
  14
  15 # GNU Emacs is distributed in the hope that it will be useful,
  16 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18 # GNU General Public License for more details.
  19
  20 # You should have received a copy of the GNU General Public License
  21 # along with GNU Emacs; see the file COPYING.  If not, write to
  22 # the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  23 # Boston, MA 02110-1301, USA.
  24
  25 # make all      to compile and build Emacs.
  26 # make install  to install it.
  27 # make TAGS     to update tags tables.
  28 #
  29 # make clean  or  make mostlyclean
  30 #      Delete all files from the current directory that are normally
  31 #      created by building the program.  Don't delete the files that
  32 #      record the configuration.  Also preserve files that could be made
  33 #      by building, but normally aren't because the distribution comes
  34 #      with them.
  35 #
  36 #      Delete `.dvi' files here if they are not part of the distribution.
  37 #
  38 # make distclean
  39 #      Delete all files from the current directory that are created by
  40 #      configuring or building the program.  If you have unpacked the
  41 #      source and built the program without creating any other files,
  42 #      `make distclean' should leave only the files that were in the
  43 #      distribution.
  44 #
  45 # make maintainer-clean
  46 #      Delete everything from the current directory that can be
  47 #      reconstructed with this Makefile.  This typically includes
  48 #      everything deleted by distclean, plus more: .elc files,
  49 #      C source files produced by Bison, tags tables, info files,
  50 #      and so on.
  51 #
  52 # make extraclean
  53 #      Still more severe - delete backup and autosave files, too.
  54 #
  55 # make bootstrap
  56 #      Recompiles all the Emacs Lisp files using the latest source,
  57 #      then rebuilds Emacs.
  58 #
  59 # make bootfast
  60 #      Recompiles changed Emacs Lisp files using the latest C source,
  61 #      then rebuilds Emacs.  This is faster than `make bootstrap'
  62 #      but once in a while an old .elc file can cause trouble.
  63
  64 SHELL = /bin/sh
  65
  66 # This may not work with certain non-GNU make's.  It only matters when
  67 # inheriting a CDPATH not starting with the current directory.
  68 CDPATH=
  69
  70 # If Make doesn't predefine MAKE, set it here.
  71 @SET_MAKE@
  72
  73 # ==================== Things `configure' Might Edit ====================
  74
  75 CC=@CC@
  76 CPP=@CPP@
  77 C_SWITCH_SYSTEM=@c_switch_system@
  78 ALLOCA=@ALLOCA@
  79 LN_S=@LN_S@
  80 CFLAGS=@CFLAGS@
  81 LDFLAGS=@LDFLAGS@
  82 CPPFLAGS=@CPPFLAGS@
  83 C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
  84 LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
  85 EXEEXT=@EXEEXT@
  86
  87 ### These help us choose version- and architecture-specific directories
  88 ### to install files in.
  89
  90 ### This should be the number of the Emacs version we're building,
  91 ### like `18.59' or `19.0'.
  92 version=@version@
  93
  94 ### This should be the name of the configuration we're building Emacs
  95 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  96 configuration=@configuration@
  97
  98 # ==================== Where To Install Things ====================
  99
 100 # The default location for installation.  Everything is placed in
 101 # subdirectories of this directory.  The default values for many of
 102 # the variables below are expressed in terms of this one, so you may
 103 # not need to change them.  This defaults to /usr/local.
 104 prefix=@prefix@
 105
 106 # Like `prefix', but used for architecture-specific files.
 107 exec_prefix=@exec_prefix@
 108
 109 # Where to install Emacs and other binaries that people will want to
 110 # run directly (like etags).
 111 bindir=@bindir@
 112
 113 # Where to install architecture-independent data files.  ${lispdir}
 114 # and ${etcdir} are subdirectories of this.
 115 datadir=@datadir@
 116
 117 # Where to install and expect the files that Emacs modifies as it
 118 # runs.  These files are all architecture-independent.
 119 # Right now, this is not used.
 120 sharedstatedir=@sharedstatedir@
 121
 122 # Where to install and expect executable files to be run by Emacs
 123 # rather than directly by users, and other architecture-dependent
 124 # data.  ${archlibdir} is a subdirectory of this.
 125 libexecdir=@libexecdir@
 126
 127 # Where to install Emacs's man pages, and what extension they should have.
 128 mandir=@mandir@
 129 manext=.1
 130 man1dir=$(mandir)/man1
 131
 132 # Where to install and expect the info files describing Emacs.  In the
 133 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
 134 # since there are now many packages documented with the texinfo
 135 # system, it is inappropriate to imply that it is part of Emacs.
 136 infodir=@infodir@
 137 INFO_FILES=ada-mode autotype calc ccmode cl dired-x ebrowse ediff efaq \
 138            elisp eintr emacs emacs-mime emacs-xtra eshell eudc flymake \
 139            forms gnus idlwave info message mh-e newsticker org pcl-cvs \
 140            pgg reftex sc ses sieve speedbar tramp vip viper widget     \
 141            woman smtpmail url rcirc erc
 142
 143 # Directory for local state files for all programs.
 144 localstatedir=@localstatedir@
 145
 146 # Where to look for bitmap files.
 147 bitmapdir=@bitmapdir@
 148
 149 # Where to find the source code.  The source code for Emacs's C kernel is
 150 # expected to be in ${srcdir}/src, and the source code for Emacs's
 151 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 152 # set by the configure script's `--srcdir' option.
 153
 154 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 155 srcdir=@srcdir@
 156
 157 # Tell make where to find source files; this is needed for the makefiles.
 158 VPATH=@srcdir@
 159
 160 # Where to find the application default.
 161 x_default_search_path=@x_default_search_path@
 162
 163 # Location to install Emacs.app on Mac OS X
 164 carbon_appdir=@carbon_appdir@
 165
 166 # ==================== Emacs-specific directories ====================
 167
 168 # These variables hold the values Emacs will actually use.  They are
 169 # based on the values of the standard Make variables above.
 170
 171 # Where to install the lisp files distributed with
 172 # Emacs.  This includes the Emacs version, so that the
 173 # lisp files for different versions of Emacs will install
 174 # themselves in separate directories.
 175 lispdir=@lispdir@
 176
 177 # Directories Emacs should search for lisp files specific
 178 # to this site (i.e. customizations), before consulting
 179 # ${lispdir}.  This should be a colon-separated list of
 180 # directories.
 181 locallisppath=@locallisppath@
 182
 183 # Where Emacs will search to find its lisp files.  Before
 184 # changing this, check to see if your purpose wouldn't
 185 # better be served by changing locallisppath.  This
 186 # should be a colon-separated list of directories.
 187 lisppath=@lisppath@
 188
 189 # Where Emacs will search for its lisp files while
 190 # building.  This is only used during the process of
 191 # compiling Emacs, to help Emacs find its lisp files
 192 # before they've been installed in their final location.
 193 # It's usually identical to lisppath, except that
 194 # it does not include locallisppath, and the
 195 # entry for the directory containing the installed lisp
 196 # files has been replaced with ../lisp.  This should be a
 197 # colon-separated list of directories.
 198 buildlisppath=${srcdir}/lisp
 199
 200 # Where to install the other architecture-independent
 201 # data files distributed with Emacs (like the tutorial,
 202 # the cookie recipes and the Zippy database). This path
 203 # usually contains the Emacs version number, so the data
 204 # files for multiple versions of Emacs may be installed
 205 # at once.
 206 etcdir=@etcdir@
 207
 208 # Where to put executables to be run by Emacs rather than
 209 # the user.  This path usually includes the Emacs version
 210 # and configuration name, so that multiple configurations
 211 # for multiple versions of Emacs may be installed at
 212 # once.
 213 archlibdir=@archlibdir@
 214
 215 # Where to put the docstring file.
 216 docdir=@docdir@
 217
 218 # Where to install Emacs game score files.
 219 gamedir=@gamedir@
 220
 221 # ==================== Utility Programs for the Build ====================
 222
 223 # Allow the user to specify the install program.
 224 INSTALL = @INSTALL@
 225 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 226 INSTALL_DATA = @INSTALL_DATA@
 227 INSTALL_INFO = @INSTALL_INFO@
 228 # By default, we uphold the dignity of our programs.
 229 INSTALL_STRIP =
 230
 231 # We use gzip to compress installed .el files.
 232 GZIP_PROG = @GZIP_PROG@
 233
 234 # ============================= Targets ==============================
 235
 236 # Program name transformation.
 237 TRANSFORM = @program_transform_name@
 238
 239 # What emacs should be called when installed.
 240 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
 241 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
 242
 243 # Subdirectories to make recursively.  `lisp' is not included
 244 # because the compiled lisp files are part of the distribution.
 245 # leim is not included because it needs special handling.
 246 SUBDIR = lib-src src
 247
 248 # The makefiles of the directories in $SUBDIR.
 249 SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile lispref/Makefile lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile
 250
 251 # Subdirectories to install, and where they'll go.
 252 # lib-src's makefile knows how to install it, so we don't do that here.
 253 # leim's makefile also knows how to install it, so we don't do that here.
 254 # When installing the info files, we need to do special things to
 255 # avoid nuking an existing dir file, so we don't do that here;
 256 # instead, we have written out explicit code in the `install' targets.
 257 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 258 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
 259
 260 all: ${SUBDIR} leim
 261
 262 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
 263
 264 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 265 epaths-force: FRC
 266         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 267           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 268           x_default_search_path=`echo ${x_default_search_path}`; \
 269           gamedir=`echo ${gamedir}`; \
 270           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 271           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";'      \
 272           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 273           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 274           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 275           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 276           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 277           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 278           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 279           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
 280           -e 's;/[*] *arch-tag:.*;/*;') &&              \
 281         ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
 282
 283 # For parallel make, src should be build before leim.
 284 # "export PARALLEL=0" is for SGI's Make, to prevent it from
 285 # running more than 1 process in the leim directory, especially for
 286 # the $TIT files there.
 287 leim:   src ${SUBDIR_MAKEFILES} FRC
 288         (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
 289           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 290           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
 291
 292 src:    lib-src FRC
 293
 294 lib-src: FRC src/config.stamp
 295
 296 .RECURSIVE: ${SUBDIR} leim
 297
 298 ${SUBDIR}: maybe_bootstrap ${SUBDIR_MAKEFILES} FRC
 299         cd $@; $(MAKE) all $(MFLAGS) \
 300           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 301           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 302
 303 blessmail: ${SUBDIR_MAKEFILES} src FRC
 304         cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
 305           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 306
 307 Makefile: $(srcdir)/Makefile.in config.status
 308         ./config.status
 309
 310 config.status: ${srcdir}/configure
 311         ./config.status --recheck
 312
 313 AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/m4/getopt.m4
 314
 315 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 316         cd ${srcdir} && autoconf
 317
 318 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 319         @true
 320 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 321         cd ${srcdir} && autoheader
 322         rm -f $(srcdir)/src/stamp-h.in
 323         echo timestamp > $(srcdir)/src/stamp-h.in
 324
 325 src/Makefile: $(srcdir)/src/Makefile.in config.status
 326         ./config.status
 327
 328 src/config.stamp: $(srcdir)/src/config.in config.status
 329         ./config.status
 330         touch src/config.stamp
 331
 332 lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status
 333         ./config.status
 334
 335 man/Makefile: $(srcdir)/man/Makefile.in config.status
 336         ./config.status
 337
 338 lispref/Makefile: $(srcdir)/lispref/Makefile.in config.status
 339         ./config.status
 340
 341 lispintro/Makefile: $(srcdir)/lispintro/Makefile.in config.status
 342         ./config.status
 343
 344 oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status
 345         ./config.status
 346
 347 lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status
 348         ./config.status
 349
 350 leim/Makefile: $(srcdir)/leim/Makefile.in config.status
 351         ./config.status
 352
 353 # ==================== Installation ====================
 354
 355 ## If we let lib-src do its own installation, that means we
 356 ## don't have to duplicate the list of utilities to install in
 357 ## this Makefile as well.
 358
 359 ## On AIX, use tar xBf.
 360 ## On Xenix, use tar xpf.
 361
 362 .PHONY: install mkdir
 363
 364 ## We delete each directory in ${COPYDESTS} before we copy into it;
 365 ## that way, we can reinstall over directories that have been put in
 366 ## place with their files read-only (perhaps because they are checked
 367 ## into RCS).  In order to make this safe, we make sure that the
 368 ## source exists and is distinct from the destination.
 369 ### We do install-arch-indep first because
 370 ### the executable needs the Lisp files and DOC file to work properly.
 371 install: all install-arch-indep install-arch-dep install-leim blessmail
 372         @true
 373
 374 ### Install the executables that were compiled specifically for this machine.
 375 ### It would be nice to do something for a parallel make
 376 ### to ensure that install-arch-indep finishes before this starts.
 377 install-arch-dep: mkdir
 378         (cd lib-src; \
 379           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 380             exec_prefix=${exec_prefix} bindir=${bindir} \
 381             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 382             INSTALL_STRIP=${INSTALL_STRIP})
 383         ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
 384         -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
 385         rm -f $(DESTDIR)${bindir}/$(EMACS)
 386         -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
 387         -unset CDPATH; \
 388         for f in `cd lib-src && echo fns-*.el`; do \
 389           if test -r lib-src/$$f ; then \
 390             ${INSTALL_DATA} lib-src/$$f $(DESTDIR)${archlibdir}/$$f; \
 391           else true; fi ; \
 392         done
 393         if test "${carbon_appdir}" != ""; then \
 394           umask 022; mkdir -p $(DESTDIR)${carbon_appdir}/Emacs.app; \
 395           (cd mac/Emacs.app; (tar -chf - . | \
 396                 (cd $(DESTDIR)${carbon_appdir}/Emacs.app; umask 022; tar -xvf - \
 397                         && cat > /dev/null))) || exit 1; \
 398         fi
 399
 400 ### Install the files that are machine-independent.
 401 ### Most of them come straight from the distribution;
 402 ### the exception is the DOC-* files, which are copied
 403 ## from the build directory.
 404
 405 ## Note that we copy DOC* and then delete DOC
 406 ## as a workaround for a bug in tar on Ultrix 4.2.
 407
 408 ## If people complain about the h flag in tar command, take that out.
 409 ## That flag is also used in leim/Makefile.in
 410 install-arch-indep: mkdir info
 411         -set ${COPYDESTS} ; \
 412         unset CDPATH; \
 413         for dir in ${COPYDIR} ; do \
 414           if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
 415             rm -rf $$1 ; \
 416           fi ; \
 417           shift ; \
 418         done
 419         -set ${COPYDESTS} ; \
 420         mkdir ${COPYDESTS} ; \
 421         chmod ugo+rx ${COPYDESTS} ; \
 422         unset CDPATH; \
 423         for dir in ${COPYDIR} ; do \
 424           dest=$$1 ; shift ; \
 425           [ -d $${dir} ] \
 426           && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
 427           && (echo "Copying $${dir} to $${dest}..." ; \
 428               (cd $${dir}; tar -chf - . ) \
 429                 | (cd $${dest}; umask 022; \
 430                    tar -xvf - && cat > /dev/null) || exit 1; \
 431               find $${dest} -exec chown $${LOGNAME:-$$USERNAME} {} ';' ;\
 432               for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \
 433                 chmod a+rx $${subdir} ; \
 434                 rm -rf $${subdir}/RCS ; \
 435                 rm -rf $${subdir}/CVS ; \
 436                 rm -f  $${subdir}/.cvsignore ; \
 437                 rm -f  $${subdir}/.arch-inventory ; \
 438                 rm -f  $${subdir}/\#* ; \
 439                 rm -f  $${subdir}/.\#* ; \
 440                 rm -f  $${subdir}/*~ ; \
 441                 rm -f  $${subdir}/*.orig ; \
 442                 rm -f  $${subdir}/[mM]akefile* ; \
 443                 rm -f  $${subdir}/ChangeLog* ; \
 444                 rm -f  $${subdir}/dired.todo ; \
 445               done) ; \
 446         done
 447         -rm -f $(DESTDIR)${lispdir}/subdirs.el
 448         $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
 449         if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
 450         then true; \
 451         else \
 452           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 453            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 454             > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
 455         fi
 456         chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
 457         -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
 458         then true; \
 459         else \
 460           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 461            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 462             > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
 463         fi
 464         -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
 465         -unset CDPATH; \
 466         if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
 467         then \
 468            echo "Copying etc/DOC-* to $(DESTDIR)${docdir} ..." ; \
 469            (cd ./etc; tar -chf - DOC*) \
 470              |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 471            (cd $(DESTDIR)$(docdir); chown $${LOGNAME:-$$USERNAME} DOC*; chmod a+r DOC*; \
 472             if test "`echo DOC-*`" != "DOC-*"; then rm DOC; fi); \
 473         else true; fi
 474         -unset CDPATH; \
 475         if [ -r ./lisp ] \
 476            && [ -r ./lisp/simple.el ] \
 477            && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \
 478            && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
 479         then \
 480            echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \
 481            (cd lisp; tar -chf - *.el *.elc) \
 482              |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 483            (cd $(DESTDIR)${lispdir}; find . -exec chown $${LOGNAME:-$$USERNAME} {} ';') ; \
 484         else true; fi
 485         -unset CDPATH; \
 486         if [ -n "${GZIP_PROG}" ]; \
 487         then \
 488            echo "Compressing *.el ..." ; \
 489            (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
 490                 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
 491             done) \
 492         else true; fi
 493         -unset CDPATH; \
 494         thisdir=`/bin/pwd`; \
 495         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 496         then \
 497           (cd $(DESTDIR)${infodir};  \
 498            if [ -f dir ]; then true; \
 499            else \
 500              (cd $${thisdir}; \
 501               ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
 502               chmod a+r $(DESTDIR)${infodir}/dir); \
 503            fi; \
 504            cd ${srcdir}/info ; \
 505            for elt in $(INFO_FILES); do \
 506               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 507                 ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \
 508                 chmod a+r $(DESTDIR)${infodir}/$$f; \
 509               done; \
 510            done); \
 511         else true; fi
 512         -unset CDPATH; \
 513         thisdir=`/bin/pwd`; \
 514         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 515         then \
 516           for elt in $(INFO_FILES); do \
 517             (cd $${thisdir}; \
 518              ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 519           done; \
 520         else true; fi
 521         -chmod -R a+r $(DESTDIR)${datadir}/emacs ${COPYDESTS} $(DESTDIR)${infodir}
 522         thisdir=`/bin/pwd`; \
 523         cd ${srcdir}/etc; \
 524         for page in emacs emacsclient etags ctags ; do \
 525           (cd $${thisdir}; \
 526            ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 $(DESTDIR)${man1dir}/$${page}${manext}; \
 527            chmod a+r $(DESTDIR)${man1dir}/$${page}${manext}); \
 528         done
 529
 530 ### Install LEIM files.  Although they are machine-independent, we
 531 ### have separate target here instead of including it in
 532 ### `install-arch-indep'.  People who extracted LEIM files after they
 533 ### insalled Emacs itself can install only LEIM files by this target.
 534 install-leim: leim/Makefile mkdir
 535         cd leim; $(MAKE) install
 536
 537 ### Build Emacs and install it, stripping binaries while installing them.
 538 install-strip:
 539         $(MAKE) INSTALL_STRIP=-s install
 540
 541 ### Build all the directories we're going to install Emacs in.  Since
 542 ### we may be creating several layers of directories (for example,
 543 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
 544 ### instead of mkdir.  Not all systems' mkdir programs have the `-p' flag.
 545 mkdir: FRC
 546         if [ -d $(DESTDIR)${datadir} ]; then true; else \
 547           $(srcdir)/mkinstalldirs $(DESTDIR)${datadir}; \
 548           chmod a+r $(DESTDIR)${datadir};\
 549         fi
 550         $(srcdir)/mkinstalldirs ${COPYDESTS} $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
 551           $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
 552           $(DESTDIR)${datadir}/emacs/site-lisp \
 553           $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
 554           $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'`
 555
 556 ### Delete all the installed files that the `install' target would
 557 ### create (but not the noninstalled files such as `make all' would
 558 ### create).
 559 ###
 560 ### Don't delete the lisp and etc directories if they're in the source tree.
 561 uninstall:
 562         (cd lib-src;                                    \
 563          $(MAKE) $(MFLAGS) uninstall                    \
 564             prefix=${prefix} exec_prefix=${exec_prefix} \
 565             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
 566         -unset CDPATH; \
 567         for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do        \
 568           if [ -d $${dir} ]; then                       \
 569             case `(cd $${dir} ; /bin/pwd)` in           \
 570               `(cd ${srcdir} ; /bin/pwd)`* ) ;;         \
 571               * ) rm -rf $${dir} ;;                     \
 572             esac ;                                      \
 573             case $${dir} in                             \
 574               $(DESTDIR)${datadir}/emacs/${version}/* )         \
 575                 rm -rf $(DESTDIR)${datadir}/emacs/${version}    \
 576               ;;                                        \
 577             esac ;                                      \
 578           fi ;                                          \
 579         done
 580         (cd $(DESTDIR)${archlibdir} && rm -f fns-*)
 581         -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
 582         (cd $(DESTDIR)${infodir} && \
 583           for elt in $(INFO_FILES); do \
 584             $(INSTALL_INFO) --remove --info-dir=. $$elt; \
 585             for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 586               rm -f $$f; \
 587             done; \
 588           done;)
 589         (cd $(DESTDIR)${man1dir}  && rm -f emacs${manext} emacsclient${manext} etags${manext} ctags${manext})
 590         (cd $(DESTDIR)${bindir}  && rm -f $(EMACSFULL) $(EMACS))
 591
 592
 593 FRC:
 594
 595 # ==================== Cleaning up and miscellanea ====================
 596
 597 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
 598
 599 ### `mostlyclean'
 600 ###      Like `clean', but may refrain from deleting a few files that people
 601 ###      normally don't want to recompile.  For example, the `mostlyclean'
 602 ###      target for GCC does not delete `libgcc.a', because recompiling it
 603 ###      is rarely necessary and takes a lot of time.
 604 mostlyclean: FRC
 605         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 606         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 607         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 608         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 609         -(cd man &&   $(MAKE) $(MFLAGS) mostlyclean)
 610         -(cd lispref &&   $(MAKE) $(MFLAGS) mostlyclean)
 611         -(cd lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)
 612         (cd leim;     $(MAKE) $(MFLAGS) mostlyclean)
 613
 614 ### `clean'
 615 ###      Delete all files from the current directory that are normally
 616 ###      created by building the program.  Don't delete the files that
 617 ###      record the configuration.  Also preserve files that could be made
 618 ###      by building, but normally aren't because the distribution comes
 619 ###      with them.
 620 ###
 621 ###      Delete `.dvi' files here if they are not part of the distribution.
 622 clean: FRC
 623         (cd src;      $(MAKE) $(MFLAGS) clean)
 624         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 625         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 626         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 627         -(cd man &&   $(MAKE) $(MFLAGS) clean)
 628         -(cd lispref &&   $(MAKE) $(MFLAGS) clean)
 629         -(cd lispintro &&   $(MAKE) $(MFLAGS) clean)
 630         (cd leim;     $(MAKE) $(MFLAGS) clean)
 631
 632 ### `distclean'
 633 ###      Delete all files from the current directory that are created by
 634 ###      configuring or building the program.  If you have unpacked the
 635 ###      source and built the program without creating any other files,
 636 ###      `make distclean' should leave only the files that were in the
 637 ###      distribution.
 638 top_distclean=\
 639         rm -f config.status config.cache config.log ; \
 640         rm -f Makefile ${SUBDIR_MAKEFILES} ; \
 641         if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi
 642 distclean: FRC
 643         (cd src;      $(MAKE) $(MFLAGS) distclean)
 644         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 645         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 646         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 647         (cd man &&    $(MAKE) $(MFLAGS) distclean)
 648         (cd lispref &&    $(MAKE) $(MFLAGS) distclean)
 649         (cd lispintro &&    $(MAKE) $(MFLAGS) distclean)
 650         (cd leim;     $(MAKE) $(MFLAGS) distclean)
 651         (cd lisp;     $(MAKE) $(MFLAGS) distclean)
 652         ${top_distclean}
 653
 654 ### `maintainer-clean'
 655 ###      Delete everything from the current directory that can be
 656 ###      reconstructed with this Makefile.  This typically includes
 657 ###      everything deleted by distclean, plus more: C source files
 658 ###      produced by Bison, tags tables, info files, and so on.
 659 ###
 660 ###      One exception, however: `make maintainer-clean' should not delete
 661 ###      `configure' even if `configure' can be remade using a rule in the
 662 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 663 ###      anything that needs to exist in order to run `configure' and then
 664 ###      begin to build the program.
 665 maintainer-clean: FRC
 666         (cd src;      $(MAKE) $(MFLAGS) maintainer-clean)
 667         (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
 668         (cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)
 669         (cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)
 670         -(cd man &&   $(MAKE) $(MFLAGS) maintainer-clean)
 671         -(cd lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)
 672         -(cd lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)
 673         (cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)
 674         (cd lisp;     $(MAKE) $(MFLAGS) maintainer-clean)
 675         ${top_distclean}
 676
 677 ### This doesn't actually appear in the coding standards, but Karl
 678 ### says GCC supports it, and that's where the configuration part of
 679 ### the coding standards seem to come from.  It's like distclean, but
 680 ### it deletes backup and autosave files too.
 681 extraclean:
 682         for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 683         ${top_distclean}
 684         -rm -f config-tmp-*
 685         -rm -f *~ \#*
 686
 687 ### Unlocking and relocking.  The idea of these productions is to reduce
 688 ### hassles when installing an incremental tar of Emacs.  Do `make unlock'
 689 ### before unlocking the file to take the write locks off all sources so
 690 ### that tar xvof will overwrite them without fuss.  Then do `make relock'
 691 ### afterward so that VC mode will know which files should be checked in
 692 ### if you want to mung them.
 693 ###
 694 ### Note: it's no disaster if these productions miss a file or two; tar
 695 ### and VC will swiftly let you know if this happens, and it is easily
 696 ### corrected.
 697 SOURCES = ChangeLog FTP INSTALL Makefile.in \
 698         README configure make-dist move-if-change
 699
 700 .PHONY: unlock relock
 701
 702 unlock:
 703         chmod u+w $(SOURCES)
 704         -(cd elisp; chmod u+w Makefile README *.texi)
 705         (cd etc; $(MAKE) $(MFLAGS) unlock)
 706         (cd lib-src; $(MAKE) $(MFLAGS) unlock)
 707         (cd lisp; $(MAKE) $(MFLAGS) unlock)
 708         (cd lisp/term; chmod u+w README *.el)
 709         (cd man; chmod u+w *texi* ChangeLog split-man)
 710         (cd lispref; chmod u+w *texi* ChangeLog)
 711         (cd lispintro; chmod u+w *texi* ChangeLog)
 712         (cd oldXMenu; chmod u+w *.[ch] Makefile README)
 713         (cd lwlib; chmod u+w *.[ch] Makefile README)
 714         (cd src; $(MAKE) $(MFLAGS) unlock)
 715
 716 relock:
 717         chmod u-w $(SOURCES)
 718         -(cd elisp; chmod u-w Makefile README *.texi)
 719         (cd etc; $(MAKE) $(MFLAGS) relock)
 720         (cd lib-src; $(MAKE) $(MFLAGS) relock)
 721         (cd lisp; $(MAKE) $(MFLAGS) relock)
 722         (cd lisp/term; chmod u+w README *.el)
 723         (cd man; chmod u+w *texi* ChangeLog split-man)
 724         (cd lispref; chmod u+w *texi* ChangeLog)
 725         (cd lispintro; chmod u+w *texi* ChangeLog)
 726         (cd oldXMenu; chmod u+w *.[ch] Makefile README)
 727         (cd lwlib; chmod u+w *.[ch] Makefile README)
 728         (cd src; $(MAKE) $(MFLAGS) relock)
 729
 730 # The src subdir knows how to do the right thing
 731 # even when the build directory and source dir are different.
 732 TAGS tags: lib-src src
 733         cd src; $(MAKE) tags
 734
 735 check:
 736         @echo "We don't have any tests for GNU Emacs yet."
 737
 738 dist:
 739         cd ${srcdir}; ./make-dist
 740
 741 .PHONY: info dvi dist check html
 742 force-info:
 743 # Note that man/Makefile knows how to
 744 # put the info files in $(srcdir),
 745 # so we can do ok running make in the build dir.
 746 info: force-info
 747         -(cd man; $(MAKE) $(MFLAGS) info)
 748         -(cd lispref; $(MAKE) $(MFLAGS) info)
 749         -(cd lispintro; $(MAKE) $(MFLAGS) info)
 750 dvi:
 751         (cd man; $(MAKE) $(MFLAGS) dvi)
 752         (cd lispref; $(MAKE) $(MFLAGS) elisp.dvi)
 753         (cd lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
 754
 755 #### Bootstrapping.
 756
 757 ### This is meant for Emacs maintainers only.  It first cleans the
 758 ### lisp subdirectory, removing all compiled Lisp files.  Then a
 759 ### special emacs executable is built from Lisp sources, which is then
 760 ### used to compile Lisp files.  The last step is a "normal" make.
 761
 762 .PHONY: bootstrap
 763 .PHONY: bootstrap-build
 764 .PHONY: bootfast
 765 .PHONY: maybe_bootstrap
 766
 767 maybe_bootstrap:
 768         @bar="`echo $(srcdir)/lisp/*.elc`"; \
 769         if [ \( "$$bar" = '$(srcdir)/lisp/*.elc' \) -o \( "$$bar" = '' \) ]; then \
 770           echo "Your tree does not include the compiled Lisp files."; \
 771           echo "You need to do \`make bootstrap' to build Emacs."; \
 772           echo "Emacs now requires Texinfo version 4.2."; \
 773           exit 1;\
 774         fi
 775
 776 bootstrap: bootstrap-clean-before FRC
 777         $(MAKE) $(MFLAGS) info bootstrap-build
 778
 779 bootfast: bootstrap-clean-before-fast FRC
 780         $(MAKE) $(MFLAGS) info bootstrap-build
 781
 782 bootstrap-build: FRC
 783         (cd lisp; $(MAKE) $(MFLAGS) bootstrap-prepare)
 784         (cd src; $(MAKE) $(MFLAGS) bootstrap)
 785         (cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs${EXEEXT})
 786         (cd src; $(MAKE) $(MFLAGS) mostlyclean)
 787         $(MAKE) $(MFLAGS) all
 788         (cd lisp; $(MAKE) $(MFLAGS) bootstrap-after)
 789
 790 ### Used for `bootstrap' to avoid deleting existing dumped Emacs executables.
 791 bootstrap-clean-before: bootstrap-clean-before-fast FRC
 792         (cd lisp;     $(MAKE) $(MFLAGS) bootstrap-clean)
 793
 794 ### Used for `bootfast' to avoid deleting existing dumped Emacs executables
 795 ### and compiled .elc files.
 796 bootstrap-clean-before-fast: FRC
 797         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 798         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 799         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 800         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 801         -(cd man &&   $(MAKE) $(MFLAGS) clean)
 802         -(cd lispref &&   $(MAKE) $(MFLAGS) clean)
 803         -(cd lispintro &&   $(MAKE) $(MFLAGS) clean)
 804         (cd leim;     $(MAKE) $(MFLAGS) clean)