Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
   6 #   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
   7 #   Free Software Foundation, Inc.
   8
   9 # This file is part of GNU Emacs.
  10
  11 # GNU Emacs is free software; you can redistribute it and/or modify
  12 # it under the terms of the GNU General Public License as published by
  13 # the Free Software Foundation; either version 3, or (at your option)
  14 # any later version.
  15
  16 # GNU Emacs is distributed in the hope that it will be useful,
  17 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  18 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19 # GNU General Public License for more details.
  20
  21 # You should have received a copy of the GNU General Public License
  22 # along with GNU Emacs; see the file COPYING.  If not, write to
  23 # the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  24 # Boston, MA 02110-1301, USA.
  25
  26 # make all      to compile and build Emacs.
  27 # make install  to install it.
  28 # make TAGS     to update tags tables.
  29 #
  30 # make clean  or  make mostlyclean
  31 #      Delete all files from the current directory that are normally
  32 #      created by building the program.  Don't delete the files that
  33 #      record the configuration.  Also preserve files that could be made
  34 #      by building, but normally aren't because the distribution comes
  35 #      with them.
  36 #
  37 #      Delete `.dvi' files here if they are not part of the distribution.
  38 #
  39 # make distclean
  40 #      Delete all files from the current directory that are created by
  41 #      configuring or building the program.  If you have unpacked the
  42 #      source and built the program without creating any other files,
  43 #      `make distclean' should leave only the files that were in the
  44 #      distribution.
  45 #
  46 # make maintainer-clean
  47 #      Delete everything from the current directory that can be
  48 #      reconstructed with this Makefile.  This typically includes
  49 #      everything deleted by distclean, plus more: .elc files,
  50 #      C source files produced by Bison, tags tables, info files,
  51 #      and so on.
  52 #
  53 # make extraclean
  54 #      Still more severe - delete backup and autosave files, too.
  55 #
  56 # make bootstrap
  57 #      Recompiles all the Emacs Lisp files using the latest source,
  58 #      then rebuilds Emacs.
  59 #
  60 # make bootfast
  61 #      Recompiles changed Emacs Lisp files using the latest C source,
  62 #      then rebuilds Emacs.  This is faster than `make bootstrap'
  63 #      but once in a while an old .elc file can cause trouble.
  64
  65 SHELL = /bin/sh
  66
  67 # This may not work with certain non-GNU make's.  It only matters when
  68 # inheriting a CDPATH not starting with the current directory.
  69 CDPATH=
  70
  71 # If Make doesn't predefine MAKE, set it here.
  72 @SET_MAKE@
  73
  74 # ==================== Things `configure' Might Edit ====================
  75
  76 CC=@CC@
  77 CPP=@CPP@
  78 C_SWITCH_SYSTEM=@c_switch_system@
  79 ALLOCA=@ALLOCA@
  80 LN_S=@LN_S@
  81 CFLAGS=@CFLAGS@
  82 LDFLAGS=@LDFLAGS@
  83 CPPFLAGS=@CPPFLAGS@
  84 C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
  85 LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
  86 EXEEXT=@EXEEXT@
  87
  88 ### These help us choose version- and architecture-specific directories
  89 ### to install files in.
  90
  91 ### This should be the number of the Emacs version we're building,
  92 ### like `18.59' or `19.0'.
  93 version=@version@
  94
  95 ### This should be the name of the configuration we're building Emacs
  96 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  97 configuration=@configuration@
  98
  99 # ==================== Where To Install Things ====================
 100
 101 # The default location for installation.  Everything is placed in
 102 # subdirectories of this directory.  The default values for many of
 103 # the variables below are expressed in terms of this one, so you may
 104 # not need to change them.  This defaults to /usr/local.
 105 prefix=@prefix@
 106
 107 # Like `prefix', but used for architecture-specific files.
 108 exec_prefix=@exec_prefix@
 109
 110 # Where to install Emacs and other binaries that people will want to
 111 # run directly (like etags).
 112 bindir=@bindir@
 113
 114 # The root of the directory tree for read-only architecture-independent
 115 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 116 datarootdir=@datarootdir@
 117
 118 # Where to install architecture-independent data files.  ${lispdir}
 119 # and ${etcdir} are subdirectories of this.
 120 datadir=@datadir@
 121
 122 # Where to install and expect the files that Emacs modifies as it
 123 # runs.  These files are all architecture-independent.
 124 # Right now, this is not used.
 125 sharedstatedir=@sharedstatedir@
 126
 127 # Where to install and expect executable files to be run by Emacs
 128 # rather than directly by users, and other architecture-dependent
 129 # data.  ${archlibdir} is a subdirectory of this.
 130 libexecdir=@libexecdir@
 131
 132 # Where to install Emacs's man pages, and what extension they should have.
 133 mandir=@mandir@
 134 manext=.1
 135 man1dir=$(mandir)/man1
 136
 137 # Where to install and expect the info files describing Emacs.  In the
 138 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
 139 # since there are now many packages documented with the texinfo
 140 # system, it is inappropriate to imply that it is part of Emacs.
 141 infodir=@infodir@
 142 INFO_FILES=ada-mode autotype calc ccmode cl dbus dired-x ebrowse ediff  \
 143            efaq eintr elisp emacs emacs-mime epa erc eshell eudc        \
 144            flymake forms gnus idlwave info message mh-e newsticker      \
 145            nxml-mode org pcl-cvs pgg rcirc reftex remember sc ses sieve \
 146            speedbar tramp vip viper widget woman smtpmail url
 147
 148 # Directory for local state files for all programs.
 149 localstatedir=@localstatedir@
 150
 151 # Where to look for bitmap files.
 152 bitmapdir=@bitmapdir@
 153
 154 # Where to find the source code.  The source code for Emacs's C kernel is
 155 # expected to be in ${srcdir}/src, and the source code for Emacs's
 156 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 157 # set by the configure script's `--srcdir' option.
 158
 159 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 160 srcdir=@srcdir@
 161
 162 # Where the manpage source files are kept.
 163 mansrcdir=$(srcdir)/doc/man
 164
 165 # Tell make where to find source files; this is needed for the makefiles.
 166 VPATH=@srcdir@
 167
 168 # Where to find the application default.
 169 x_default_search_path=@x_default_search_path@
 170
 171 # Location to install Emacs.app on Mac OS X
 172 carbon_appdir=@carbon_appdir@
 173
 174 # Where the etc/emacs.desktop file is to be installed.
 175 desktopdir=$(datarootdir)/applications
 176
 177 # Where the etc/images/icons/hicolor directory is to be installed.
 178 icondir=$(datarootdir)/icons
 179
 180 # ==================== Emacs-specific directories ====================
 181
 182 # These variables hold the values Emacs will actually use.  They are
 183 # based on the values of the standard Make variables above.
 184
 185 # Where to install the lisp files distributed with
 186 # Emacs.  This includes the Emacs version, so that the
 187 # lisp files for different versions of Emacs will install
 188 # themselves in separate directories.
 189 lispdir=@lispdir@
 190
 191 # Directories Emacs should search for lisp files specific
 192 # to this site (i.e. customizations), before consulting
 193 # ${lispdir}.  This should be a colon-separated list of
 194 # directories.
 195 locallisppath=@locallisppath@
 196
 197 # Where Emacs will search to find its lisp files.  Before
 198 # changing this, check to see if your purpose wouldn't
 199 # better be served by changing locallisppath.  This
 200 # should be a colon-separated list of directories.
 201 lisppath=@lisppath@
 202
 203 # Where Emacs will search for its lisp files while
 204 # building.  This is only used during the process of
 205 # compiling Emacs, to help Emacs find its lisp files
 206 # before they've been installed in their final location.
 207 # It's usually identical to lisppath, except that
 208 # it does not include locallisppath, and the
 209 # entry for the directory containing the installed lisp
 210 # files has been replaced with ../lisp.  This should be a
 211 # colon-separated list of directories.
 212 buildlisppath=${srcdir}/lisp
 213
 214 # Where to install the other architecture-independent
 215 # data files distributed with Emacs (like the tutorial,
 216 # the cookie recipes and the Zippy database). This path
 217 # usually contains the Emacs version number, so the data
 218 # files for multiple versions of Emacs may be installed
 219 # at once.
 220 etcdir=@etcdir@
 221
 222 # Where to put executables to be run by Emacs rather than
 223 # the user.  This path usually includes the Emacs version
 224 # and configuration name, so that multiple configurations
 225 # for multiple versions of Emacs may be installed at
 226 # once.
 227 archlibdir=@archlibdir@
 228
 229 # Where to put the docstring file.
 230 docdir=@docdir@
 231
 232 # Where to install Emacs game score files.
 233 gamedir=@gamedir@
 234
 235 # ==================== Utility Programs for the Build ====================
 236
 237 # Allow the user to specify the install program.
 238 INSTALL = @INSTALL@
 239 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 240 INSTALL_DATA = @INSTALL_DATA@
 241 INSTALL_INFO = @INSTALL_INFO@
 242 # By default, we uphold the dignity of our programs.
 243 INSTALL_STRIP =
 244
 245 # We use gzip to compress installed .el files.
 246 GZIP_PROG = @GZIP_PROG@
 247
 248 # ============================= Targets ==============================
 249
 250 # Program name transformation.
 251 TRANSFORM = @program_transform_name@
 252
 253 # What emacs should be called when installed.
 254 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
 255 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
 256
 257 # Subdirectories to make recursively.  `lisp' is not included
 258 # because the compiled lisp files are part of the distribution.
 259 # leim is not included because it needs special handling.
 260 SUBDIR = lib-src src
 261
 262 # The makefiles of the directories in $SUBDIR.
 263 SUBDIR_MAKEFILES = lib-src/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispref/Makefile doc/lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile
 264
 265 # Subdirectories to install, and where they'll go.
 266 # lib-src's makefile knows how to install it, so we don't do that here.
 267 # leim's makefile also knows how to install it, so we don't do that here.
 268 # When installing the info files, we need to do special things to
 269 # avoid nuking an existing dir file, so we don't do that here;
 270 # instead, we have written out explicit code in the `install' targets.
 271 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 272 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
 273
 274 all: ${SUBDIR} leim
 275
 276 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
 277
 278 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 279 epaths-force: FRC
 280         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 281           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 282           x_default_search_path=`echo ${x_default_search_path}`; \
 283           gamedir=`echo ${gamedir}`; \
 284           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 285           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";'      \
 286           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 287           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 288           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 289           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 290           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 291           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 292           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 293           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
 294           -e 's;/[*] *arch-tag:.*;/*;') &&              \
 295         ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
 296
 297 # For parallel make, src should be built before leim.
 298 # "export PARALLEL=0" is for SGI's Make, to prevent it from
 299 # running more than 1 process in the leim directory, especially for
 300 # the $TIT files there.
 301 leim:   src ${SUBDIR_MAKEFILES} FRC
 302         (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
 303           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 304           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
 305
 306 src:    lib-src FRC
 307
 308 lib-src: FRC src/config.stamp
 309
 310 .RECURSIVE: ${SUBDIR} leim
 311
 312 ${SUBDIR}: maybe_bootstrap ${SUBDIR_MAKEFILES} FRC
 313         cd $@; $(MAKE) all $(MFLAGS) \
 314           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 315           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 316
 317 blessmail: ${SUBDIR_MAKEFILES} src FRC
 318         cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
 319           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 320
 321 Makefile: $(srcdir)/Makefile.in config.status
 322         ./config.status
 323
 324 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 325         ./config.status --recheck
 326
 327 AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/m4/getopt.m4
 328
 329 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 330         cd ${srcdir} && autoconf
 331
 332 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 333         @true
 334 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 335         cd ${srcdir} && autoheader
 336         rm -f $(srcdir)/src/stamp-h.in
 337         echo timestamp > $(srcdir)/src/stamp-h.in
 338
 339 src/Makefile: $(srcdir)/src/Makefile.in config.status
 340         ./config.status
 341
 342 src/config.stamp: $(srcdir)/src/config.in config.status
 343         ./config.status
 344         touch src/config.stamp
 345
 346 lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status
 347         ./config.status
 348
 349 doc/emacs/Makefile: $(srcdir)/doc/emacs/Makefile.in config.status
 350         ./config.status
 351
 352 doc/misc/Makefile: $(srcdir)/doc/misc/Makefile.in config.status
 353         ./config.status
 354
 355 doc/lispref/Makefile: $(srcdir)/doc/lispref/Makefile.in config.status
 356         ./config.status
 357
 358 doc/lispintro/Makefile: $(srcdir)/doc/lispintro/Makefile.in config.status
 359         ./config.status
 360
 361 oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status
 362         ./config.status
 363
 364 lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status
 365         ./config.status
 366
 367 leim/Makefile: $(srcdir)/leim/Makefile.in config.status
 368         ./config.status
 369
 370 # ==================== Installation ====================
 371
 372 ## If we let lib-src do its own installation, that means we
 373 ## don't have to duplicate the list of utilities to install in
 374 ## this Makefile as well.
 375
 376 ## On AIX, use tar xBf.
 377 ## On Xenix, use tar xpf.
 378
 379 .PHONY: install mkdir
 380
 381 ## We delete each directory in ${COPYDESTS} before we copy into it;
 382 ## that way, we can reinstall over directories that have been put in
 383 ## place with their files read-only (perhaps because they are checked
 384 ## into RCS).  In order to make this safe, we make sure that the
 385 ## source exists and is distinct from the destination.
 386 ### We do install-arch-indep first because
 387 ### the executable needs the Lisp files and DOC file to work properly.
 388 install: all install-arch-indep install-arch-dep install-leim blessmail
 389         @true
 390
 391 ### Install the executables that were compiled specifically for this machine.
 392 ### It would be nice to do something for a parallel make
 393 ### to ensure that install-arch-indep finishes before this starts.
 394 install-arch-dep: mkdir
 395         (cd lib-src; \
 396           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 397             exec_prefix=${exec_prefix} bindir=${bindir} \
 398             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 399             INSTALL_STRIP=${INSTALL_STRIP})
 400         ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
 401         -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
 402         rm -f $(DESTDIR)${bindir}/$(EMACS)
 403         -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
 404         -unset CDPATH; \
 405         for f in `cd lib-src && echo fns-*.el`; do \
 406           if test -r lib-src/$$f ; then \
 407             ${INSTALL_DATA} lib-src/$$f $(DESTDIR)${archlibdir}/$$f; \
 408           else true; fi ; \
 409         done
 410         if test "${carbon_appdir}" != ""; then \
 411           umask 022; mkdir -p $(DESTDIR)${carbon_appdir}/Emacs.app; \
 412           (cd mac/Emacs.app; (tar -chf - . | \
 413                 (cd $(DESTDIR)${carbon_appdir}/Emacs.app; umask 022; tar -xvf - \
 414                         && cat > /dev/null))) || exit 1; \
 415         fi
 416
 417 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 418 ## Needs to be the user running install, so configure can't set it.
 419 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 420           `id -un 2> /dev/null`; do \
 421           [ -n "$${installuser}" ] && break ; \
 422         done
 423
 424 ### Install the files that are machine-independent.
 425 ### Most of them come straight from the distribution;
 426 ### the exception is the DOC-* files, which are copied
 427 ### from the build directory.
 428
 429 ## Note that we copy DOC* and then delete DOC
 430 ## as a workaround for a bug in tar on Ultrix 4.2.
 431
 432 ## We install only the relevant DOC file if possible
 433 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
 434
 435 ## If people complain about the h flag in tar command, take that out.
 436 ## That flag is also used in leim/Makefile.in
 437
 438 ## Note that the Makefiles in the etc directory are potentially useful
 439 ## in an installed Emacs, so should not be excluded.
 440
 441 install-arch-indep: mkdir info install-etc
 442         -set ${COPYDESTS} ; \
 443         unset CDPATH; \
 444         for dir in ${COPYDIR} ; do \
 445           if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
 446             rm -rf $$1 ; \
 447           fi ; \
 448           shift ; \
 449         done
 450         -set ${COPYDESTS} ; \
 451         mkdir ${COPYDESTS} ; \
 452         chmod ugo+rx ${COPYDESTS} ; \
 453         unset CDPATH; \
 454         $(set_installuser); \
 455         for dir in ${COPYDIR} ; do \
 456           dest=$$1 ; shift ; \
 457           [ -d $${dir} ] \
 458           && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
 459           && (echo "Copying $${dir} to $${dest}..." ; \
 460               (cd $${dir}; tar -chf - . ) \
 461                 | (cd $${dest}; umask 022; \
 462                    tar -xvf - && cat > /dev/null) || exit 1; \
 463               find $${dest} -exec chown $${installuser} {} ';' ;\
 464               for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \
 465                 chmod a+rx $${subdir} ; \
 466                 rm -rf $${subdir}/RCS ; \
 467                 rm -rf $${subdir}/CVS ; \
 468                 rm -f  $${subdir}/.cvsignore ; \
 469                 rm -f  $${subdir}/.arch-inventory ; \
 470                 rm -f  $${subdir}/\#* ; \
 471                 rm -f  $${subdir}/.\#* ; \
 472                 rm -f  $${subdir}/*~ ; \
 473                 rm -f  $${subdir}/*.orig ; \
 474                 [ "$${dir}" != "${srcdir}/etc" ] && \
 475                         rm -f  $${subdir}/[mM]akefile* ; \
 476                 rm -f  $${subdir}/ChangeLog* ; \
 477                 rm -f  $${subdir}/dired.todo ; \
 478               done) ; \
 479         done
 480         -rm -f $(DESTDIR)${lispdir}/subdirs.el
 481         $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
 482         if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
 483         then true; \
 484         else \
 485           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 486            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 487             > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
 488         fi
 489         chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
 490         -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
 491         then true; \
 492         else \
 493           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 494            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 495             > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
 496         fi
 497         -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
 498         -unset CDPATH; \
 499         if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
 500         then \
 501            fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
 502            if [ -f "./etc/DOC-$${fullversion}" ]; \
 503            then \
 504              docfile="DOC-$${fullversion}"; \
 505            else \
 506              docfile="DOC-${version}*"; \
 507            fi; \
 508            echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
 509            (cd ./etc; tar -chf - $${docfile}) \
 510              |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 511            (cd $(DESTDIR)$(docdir); \
 512             $(set_installuser); \
 513             chown $${installuser} DOC*; chmod a+r DOC*; \
 514             if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
 515         else true; fi
 516         -unset CDPATH; \
 517         if [ -r ./lisp ] \
 518            && [ -r ./lisp/simple.el ] \
 519            && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \
 520            && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
 521         then \
 522            echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \
 523            (cd lisp; tar -chf - *.el *.elc) \
 524              |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 525            (cd $(DESTDIR)${lispdir}; \
 526             $(set_installuser); \
 527             find . -exec chown $${installuser} {} ';') ; \
 528         else true; fi
 529         -unset CDPATH; \
 530         if [ -n "${GZIP_PROG}" ]; \
 531         then \
 532            echo "Compressing *.el ..." ; \
 533            (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
 534                 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
 535             done) \
 536         else true; fi
 537         -unset CDPATH; \
 538         thisdir=`/bin/pwd`; \
 539         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 540         then \
 541           (cd $(DESTDIR)${infodir};  \
 542            if [ -f dir ]; then true; \
 543            else \
 544              (cd $${thisdir}; \
 545               ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
 546               chmod a+r $(DESTDIR)${infodir}/dir); \
 547            fi; \
 548            cd ${srcdir}/info ; \
 549            for elt in $(INFO_FILES); do \
 550               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 551                 ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \
 552                 chmod a+r $(DESTDIR)${infodir}/$$f; \
 553               done; \
 554            done); \
 555         else true; fi
 556         -unset CDPATH; \
 557         thisdir=`/bin/pwd`; \
 558         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 559         then \
 560           for elt in $(INFO_FILES); do \
 561             (cd $${thisdir}; \
 562              ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 563           done; \
 564         else true; fi
 565         -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} $(DESTDIR)${datadir}/emacs/site-lisp ${COPYDESTS} $(DESTDIR)${infodir}
 566         thisdir=`/bin/pwd`; \
 567         cd ${mansrcdir}; \
 568         for page in emacs emacsclient etags ctags ; do \
 569           (cd $${thisdir}; \
 570            ${INSTALL_DATA} ${mansrcdir}/$${page}.1 $(DESTDIR)${man1dir}/$${page}${manext}; \
 571            chmod a+r $(DESTDIR)${man1dir}/$${page}${manext}); \
 572         done
 573
 574 ## Install those items from etc/ that need to end up elsewhere.
 575 install-etc: mkdir
 576         ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
 577           $(DESTDIR)${desktopdir}/emacs.desktop
 578         for icon in $(srcdir)/etc/images/icons/*/*x*/apps/*.*; do \
 579           if [ -r $${icon} ]; then \
 580             iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
 581             ${INSTALL_DATA} $${icon} $${iicon} ; \
 582           fi ; \
 583         done
 584
 585 ### Install LEIM files.  Although they are machine-independent, we
 586 ### have separate target here instead of including it in
 587 ### `install-arch-indep'.  People who extracted LEIM files after they
 588 ### insalled Emacs itself can install only LEIM files by this target.
 589 install-leim: leim/Makefile mkdir
 590         cd leim; $(MAKE) install
 591
 592 ### Build Emacs and install it, stripping binaries while installing them.
 593 install-strip:
 594         $(MAKE) INSTALL_STRIP=-s install
 595
 596 ### Build all the directories we're going to install Emacs in.  Since
 597 ### we may be creating several layers of directories (for example,
 598 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
 599 ### instead of mkdir.  Not all systems' mkdir programs have the `-p' flag.
 600 mkdir: FRC
 601         if [ -d $(DESTDIR)${datadir} ]; then true; else \
 602           $(srcdir)/mkinstalldirs $(DESTDIR)${datadir}; \
 603           chmod a+r $(DESTDIR)${datadir};\
 604         fi
 605         icondirs= ; \
 606         for dir in $(srcdir)/etc/images/icons/*/*x*/apps; do \
 607           if [ -d $${dir} ]; then \
 608             icondirs="$${icondirs} $${dir}" ; \
 609           fi ; \
 610         done ; \
 611         icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
 612         $(srcdir)/mkinstalldirs ${COPYDESTS} $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
 613           $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
 614           $(DESTDIR)${datadir}/emacs/site-lisp \
 615           $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
 616           $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
 617           $(DESTDIR)${desktopdir} $${icondirs}
 618
 619 ### Delete all the installed files that the `install' target would
 620 ### create (but not the noninstalled files such as `make all' would
 621 ### create).
 622 ###
 623 ### Don't delete the lisp and etc directories if they're in the source tree.
 624 uninstall:
 625         (cd lib-src;                                    \
 626          $(MAKE) $(MFLAGS) uninstall                    \
 627             prefix=${prefix} exec_prefix=${exec_prefix} \
 628             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
 629         -unset CDPATH; \
 630         for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do        \
 631           if [ -d $${dir} ]; then                       \
 632             case `(cd $${dir} ; /bin/pwd)` in           \
 633               `(cd ${srcdir} ; /bin/pwd)`* ) ;;         \
 634               * ) rm -rf $${dir} ;;                     \
 635             esac ;                                      \
 636             case $${dir} in                             \
 637               $(DESTDIR)${datadir}/emacs/${version}/* )         \
 638                 rm -rf $(DESTDIR)${datadir}/emacs/${version}    \
 639               ;;                                        \
 640             esac ;                                      \
 641           fi ;                                          \
 642         done
 643         (cd $(DESTDIR)${archlibdir} && rm -f fns-*)
 644         -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
 645         (cd $(DESTDIR)${infodir} && \
 646           for elt in $(INFO_FILES); do \
 647             $(INSTALL_INFO) --remove --info-dir=. $$elt; \
 648             for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 649               rm -f $$f; \
 650             done; \
 651           done;)
 652         (cd $(DESTDIR)${man1dir}  && rm -f emacs${manext} emacsclient${manext} etags${manext} ctags${manext})
 653         (cd $(DESTDIR)${bindir}  && rm -f $(EMACSFULL) $(EMACS))
 654
 655
 656 FRC:
 657
 658 # ==================== Cleaning up and miscellanea ====================
 659
 660 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
 661
 662 ### `mostlyclean'
 663 ###      Like `clean', but may refrain from deleting a few files that people
 664 ###      normally don't want to recompile.  For example, the `mostlyclean'
 665 ###      target for GCC does not delete `libgcc.a', because recompiling it
 666 ###      is rarely necessary and takes a lot of time.
 667 mostlyclean: FRC
 668         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 669         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 670         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 671         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 672         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) mostlyclean)
 673         -(cd doc/misc &&   $(MAKE) $(MFLAGS) mostlyclean)
 674         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) mostlyclean)
 675         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)
 676         (cd leim;     $(MAKE) $(MFLAGS) mostlyclean)
 677
 678 ### `clean'
 679 ###      Delete all files from the current directory that are normally
 680 ###      created by building the program.  Don't delete the files that
 681 ###      record the configuration.  Also preserve files that could be made
 682 ###      by building, but normally aren't because the distribution comes
 683 ###      with them.
 684 ###
 685 ###      Delete `.dvi' files here if they are not part of the distribution.
 686 clean: FRC
 687         (cd src;      $(MAKE) $(MFLAGS) clean)
 688         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 689         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 690         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 691         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 692         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 693         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 694         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 695         (cd leim;     $(MAKE) $(MFLAGS) clean)
 696
 697 ### `distclean'
 698 ###      Delete all files from the current directory that are created by
 699 ###      configuring or building the program.  If you have unpacked the
 700 ###      source and built the program without creating any other files,
 701 ###      `make distclean' should leave only the files that were in the
 702 ###      distribution.
 703 top_distclean=\
 704         rm -f config.status config.cache config.log ; \
 705         rm -f Makefile ${SUBDIR_MAKEFILES} ; \
 706         if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi
 707 distclean: FRC
 708         (cd src;      $(MAKE) $(MFLAGS) distclean)
 709         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 710         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 711         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 712         (cd doc/emacs &&    $(MAKE) $(MFLAGS) distclean)
 713         (cd doc/misc &&    $(MAKE) $(MFLAGS) distclean)
 714         (cd doc/lispref &&    $(MAKE) $(MFLAGS) distclean)
 715         (cd doc/lispintro &&    $(MAKE) $(MFLAGS) distclean)
 716         (cd leim;     $(MAKE) $(MFLAGS) distclean)
 717         (cd lisp;     $(MAKE) $(MFLAGS) distclean)
 718         ${top_distclean}
 719
 720 ### `maintainer-clean'
 721 ###      Delete everything from the current directory that can be
 722 ###      reconstructed with this Makefile.  This typically includes
 723 ###      everything deleted by distclean, plus more: C source files
 724 ###      produced by Bison, tags tables, info files, and so on.
 725 ###
 726 ###      One exception, however: `make maintainer-clean' should not delete
 727 ###      `configure' even if `configure' can be remade using a rule in the
 728 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 729 ###      anything that needs to exist in order to run `configure' and then
 730 ###      begin to build the program.
 731 maintainer-clean: FRC
 732         (cd src;      $(MAKE) $(MFLAGS) maintainer-clean)
 733         (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
 734         (cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)
 735         (cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)
 736         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) maintainer-clean)
 737         -(cd doc/misc &&   $(MAKE) $(MFLAGS) maintainer-clean)
 738         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)
 739         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)
 740         (cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)
 741         (cd lisp;     $(MAKE) $(MFLAGS) maintainer-clean)
 742         ${top_distclean}
 743
 744 ### This doesn't actually appear in the coding standards, but Karl
 745 ### says GCC supports it, and that's where the configuration part of
 746 ### the coding standards seem to come from.  It's like distclean, but
 747 ### it deletes backup and autosave files too.
 748 extraclean:
 749         for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 750         ${top_distclean}
 751         -rm -f config-tmp-*
 752         -rm -f *~ \#*
 753
 754 # The src subdir knows how to do the right thing
 755 # even when the build directory and source dir are different.
 756 TAGS tags: lib-src src
 757         cd src; $(MAKE) tags
 758
 759 check:
 760         @echo "We don't have any tests for GNU Emacs yet."
 761
 762 dist:
 763         cd ${srcdir}; ./make-dist
 764
 765 .PHONY: info dvi dist check html
 766 force-info:
 767 # Note that man/Makefile knows how to
 768 # put the info files in $(srcdir),
 769 # so we can do ok running make in the build dir.
 770 info: force-info
 771         -(cd doc/emacs; $(MAKE) $(MFLAGS) info)
 772         -(cd doc/misc; $(MAKE) $(MFLAGS) info)
 773         -(cd doc/lispref; $(MAKE) $(MFLAGS) info)
 774         -(cd doc/lispintro; $(MAKE) $(MFLAGS) info)
 775
 776 # The info/dir file must be updated by hand when new manuals are added.
 777 check-info-dir: info
 778         cd info ; \
 779         missing= ; \
 780         for file in *; do \
 781           test -f "$${file}" || continue ; \
 782           case $${file} in \
 783             *-[0-9]*|COPYING|dir) continue ;; \
 784           esac ; \
 785           grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
 786         done ; \
 787         if test -n "$${missing}"; then \
 788           echo "Missing info/dir entries: $${missing}" ; \
 789           exit 1 ; \
 790         fi ; \
 791         echo "info/dir is OK"
 792
 793 dvi:
 794         (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
 795         (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
 796         (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
 797         (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
 798
 799 #### Bootstrapping.
 800
 801 ### This is meant for Emacs maintainers only.  It first cleans the
 802 ### lisp subdirectory, removing all compiled Lisp files.  Then a
 803 ### special emacs executable is built from Lisp sources, which is then
 804 ### used to compile Lisp files.  The last step is a "normal" make.
 805
 806 .PHONY: bootstrap
 807 .PHONY: bootstrap-build
 808 .PHONY: bootfast
 809 .PHONY: maybe_bootstrap
 810
 811 maybe_bootstrap:
 812         @bar="`echo $(srcdir)/lisp/*.elc`"; \
 813         if [ \( "$$bar" = '$(srcdir)/lisp/*.elc' \) -o \( "$$bar" = '' \) ]; then \
 814           echo "Your tree does not include the compiled Lisp files."; \
 815           echo "You need to do \`make bootstrap' to build Emacs."; \
 816           exit 1;\
 817         fi
 818
 819 bootstrap: bootstrap-clean-before FRC
 820         $(MAKE) $(MFLAGS) info bootstrap-build
 821
 822 bootfast: bootstrap-clean-before-fast FRC
 823         $(MAKE) $(MFLAGS) info bootstrap-build
 824
 825 bootstrap-build: FRC
 826         (cd lisp; $(MAKE) $(MFLAGS) bootstrap-prepare)
 827         (cd src; $(MAKE) $(MFLAGS) bootstrap)
 828         (cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs${EXEEXT})
 829         (cd src; $(MAKE) $(MFLAGS) mostlyclean)
 830         $(MAKE) $(MFLAGS) all
 831         (cd lisp; $(MAKE) $(MFLAGS) bootstrap-after)
 832
 833 ### Used for `bootstrap' to avoid deleting existing dumped Emacs executables.
 834 bootstrap-clean-before: bootstrap-clean-before-fast FRC
 835         (cd lisp;     $(MAKE) $(MFLAGS) bootstrap-clean)
 836         (cd leim;     $(MAKE) $(MFLAGS) bootstrap-clean)
 837
 838 ### Used for `bootfast' to avoid deleting existing dumped Emacs executables
 839 ### and compiled .elc files.
 840 bootstrap-clean-before-fast: FRC
 841         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 842         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 843         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 844         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 845         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 846         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 847         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 848         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 849         (cd leim;     $(MAKE) $(MFLAGS) clean)
 850
 851 .PHONY: check-declare
 852
 853 check-declare:
 854         @if [ ! -e $(srcdir)/src/emacs ]; then \
 855           echo "You must build Emacs to use this command"; \
 856           exit 1; \
 857         fi
 858         (cd leim; $(MAKE) $(MFLAGS) $@)
 859         (cd lisp; $(MAKE) $(MFLAGS) $@)