Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # Copyright (C) 1992-2013 Free Software Foundation, Inc.
   6
   7 # This file is part of GNU Emacs.
   8
   9 # GNU Emacs is free software: you can redistribute it and/or modify
  10 # it under the terms of the GNU General Public License as published by
  11 # the Free Software Foundation, either version 3 of the License, or
  12 # (at your option) any later version.
  13
  14 # GNU Emacs is distributed in the hope that it will be useful,
  15 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  16 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17 # GNU General Public License for more details.
  18
  19 # You should have received a copy of the GNU General Public License
  20 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
  21
  22 ### Commentary:
  23
  24 # make all      to compile and build Emacs.
  25 # make install  to install it.
  26 # make TAGS     to update tags tables.
  27 #
  28 # make clean  or  make mostlyclean
  29 #      Delete all files from the current directory that are normally
  30 #      created by building the program.  Don't delete the files that
  31 #      record the configuration.  Also preserve files that could be made
  32 #      by building, but normally aren't because the distribution comes
  33 #      with them.
  34 #
  35 #      Delete `.dvi' files here if they are not part of the distribution.
  36 #
  37 # make distclean
  38 #      Delete all files from the current directory that are created by
  39 #      configuring or building the program.  If you have unpacked the
  40 #      source and built the program without creating any other files,
  41 #      `make distclean' should leave only the files that were in the
  42 #      distribution.
  43 #
  44 # make maintainer-clean
  45 #      Delete everything from the current directory that can be
  46 #      reconstructed with this Makefile.  This typically includes
  47 #      everything deleted by distclean, plus more: .elc files,
  48 #      C source files produced by Bison, tags tables, info files,
  49 #      and so on.
  50 #
  51 # make extraclean
  52 #      Still more severe - delete backup and autosave files, too.
  53 #
  54 # make bootstrap
  55 #      Removes all the compiled files to force a new bootstrap from a
  56 #      clean slate, and then build in the normal way.
  57 #
  58 # make docs
  59 #      Make Emacs documentation files from their sources; requires makeinfo.
  60
  61 SHELL = /bin/sh
  62
  63 # This may not work with certain non-GNU make's.  It only matters when
  64 # inheriting a CDPATH not starting with the current directory.
  65 CDPATH=
  66
  67 # If Make doesn't predefine MAKE, set it here.
  68 @SET_MAKE@
  69
  70 # Prevent submakes from outputting "Entering directory ..." and
  71 # "Leaving directory..." diagnostics that would mess up 'make echo-info'.
  72 QUIET_SUBMAKE = MAKELEVEL=0
  73
  74 # ==================== Things `configure' Might Edit ====================
  75
  76 cache_file = @cache_file@
  77 CONFIGURE_FLAGS = --cache-file=$(cache_file)
  78
  79 CC=@CC@
  80 CFLAGS=@CFLAGS@
  81 LDFLAGS=@LDFLAGS@
  82 CPPFLAGS=@CPPFLAGS@
  83 EXEEXT=@EXEEXT@
  84
  85 ### These help us choose version- and architecture-specific directories
  86 ### to install files in.
  87
  88 ### This should be the number of the Emacs version we're building,
  89 ### like `18.59' or `19.0'.
  90 version=@version@
  91
  92 ### This should be the name of the configuration we're building Emacs
  93 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  94 configuration=@configuration@
  95
  96 ### The nt/ subdirectory gets built only for MinGW
  97 NTDIR=@NTDIR@
  98
  99 # ==================== Where To Install Things ====================
 100
 101 # Location to install Emacs.app under GNUstep / Mac OS X.
 102 # Later values may use these.
 103 ns_appbindir=@ns_appbindir@
 104 ns_appresdir=@ns_appresdir@
 105 # Either yes or no depending on whether this is a relocatable Emacs.app.
 106 ns_self_contained=@ns_self_contained@
 107
 108 # The default location for installation.  Everything is placed in
 109 # subdirectories of this directory.  The default values for many of
 110 # the variables below are expressed in terms of this one, so you may
 111 # not need to change them.  This defaults to /usr/local.
 112 prefix=@prefix@
 113
 114 # Like `prefix', but used for architecture-specific files.
 115 exec_prefix=@exec_prefix@
 116
 117 # Where to install Emacs and other binaries that people will want to
 118 # run directly (like etags).
 119 bindir=@bindir@
 120
 121 # The root of the directory tree for read-only architecture-independent
 122 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 123 datarootdir=@datarootdir@
 124
 125 # Where to install architecture-independent data files.  ${lispdir}
 126 # and ${etcdir} are subdirectories of this.
 127 datadir=@datadir@
 128
 129 # Where to install and expect the files that Emacs modifies as it
 130 # runs.  These files are all architecture-independent.
 131 # Right now, this is not used.
 132 sharedstatedir=@sharedstatedir@
 133
 134 # Where to install and expect executable files to be run by Emacs
 135 # rather than directly by users (and other architecture-dependent
 136 # data, although Emacs does not have any).  The executables
 137 # are actually installed in ${archlibdir}, which is (normally)
 138 # a subdirectory of this.
 139 libexecdir=@libexecdir@
 140
 141 # Where to install Emacs's man pages.
 142 # Note they contain cross-references that expect them to be in section 1.
 143 mandir=@mandir@
 144 man1dir=$(mandir)/man1
 145
 146 # Where to install and expect the info files describing Emacs.
 147 infodir=@infodir@
 148 # Info files not in the doc/misc directory (we get those via make echo-info).
 149 INFO_EXT=@INFO_EXT@
 150 INFO_NONMISC=emacs$(INFO_EXT) eintr$(INFO_EXT) elisp$(INFO_EXT)
 151
 152 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
 153 HAVE_MAKEINFO=@HAVE_MAKEINFO@
 154
 155 # Directory for local state files for all programs.
 156 localstatedir=@localstatedir@
 157
 158 # Where to look for bitmap files.
 159 bitmapdir=@bitmapdir@
 160
 161 # Where to find the source code.  The source code for Emacs's C kernel is
 162 # expected to be in ${srcdir}/src, and the source code for Emacs's
 163 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 164 # set by the configure script's `--srcdir' option.
 165
 166 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 167 srcdir=@srcdir@
 168
 169 # Where the manpage source files are kept.
 170 mansrcdir=$(srcdir)/doc/man
 171
 172 # Tell make where to find source files; this is needed for the makefiles.
 173 VPATH=@srcdir@
 174
 175 # Where to find the application default.
 176 x_default_search_path=@x_default_search_path@
 177
 178 # Where the etc/emacs.desktop file is to be installed.
 179 desktopdir=$(datarootdir)/applications
 180
 181 # Where the etc/images/icons/hicolor directory is to be installed.
 182 icondir=$(datarootdir)/icons
 183
 184 # The source directory for the icon files.
 185 iconsrcdir=$(srcdir)/etc/images/icons
 186
 187 # ==================== Emacs-specific directories ====================
 188
 189 # These variables hold the values Emacs will actually use.  They are
 190 # based on the values of the standard Make variables above.
 191
 192 # Where to install the lisp, leim files distributed with
 193 # Emacs.  This includes the Emacs version, so that the
 194 # lisp files for different versions of Emacs will install
 195 # themselves in separate directories.
 196 lispdir=@lispdir@
 197 leimdir=@leimdir@
 198
 199 # Directories Emacs should search for standard lisp files.
 200 # The default is ${lispdir}:${leimdir}.
 201 standardlisppath=@standardlisppath@
 202
 203 # Directories Emacs should search for lisp files specific to this
 204 # site (i.e. customizations), before consulting ${standardlisppath}.
 205 # This should be a colon-separated list of directories.
 206 locallisppath=@locallisppath@
 207
 208 # Where Emacs will search to find its lisp files.  Before
 209 # changing this, check to see if your purpose wouldn't
 210 # better be served by changing locallisppath.  This
 211 # should be a colon-separated list of directories.
 212 # The default is ${locallisppath}:${standardlisppath}.
 213 lisppath=@lisppath@
 214
 215 # Where Emacs will search for its lisp files while
 216 # building.  This is only used during the process of
 217 # compiling Emacs, to help Emacs find its lisp files
 218 # before they've been installed in their final location.
 219 # This should be a colon-separated list of directories.
 220 # Normally it points to the lisp/ directory in the sources.
 221 buildlisppath=${srcdir}/lisp
 222
 223 # Where to install the other architecture-independent
 224 # data files distributed with Emacs (like the tutorial,
 225 # the cookie recipes and the Zippy database). This path
 226 # usually contains the Emacs version number, so the data
 227 # files for multiple versions of Emacs may be installed
 228 # at once.
 229 etcdir=@etcdir@
 230
 231 # Where to put executables to be run by Emacs rather than
 232 # the user.  This path usually includes the Emacs version
 233 # and configuration name, so that multiple configurations
 234 # for multiple versions of Emacs may be installed at
 235 # once.
 236 archlibdir=@archlibdir@
 237
 238 # Where to put the docstring file.
 239 docdir=@docdir@
 240
 241 # Where to install Emacs game score files.
 242 gamedir=@gamedir@
 243
 244 # ==================== Utility Programs for the Build ====================
 245
 246 # Allow the user to specify the install program.
 247 # Note that if the system does not provide a suitable install,
 248 # configure will use build-aux/install-sh.  Annoyingly, it does
 249 # not use an absolute path.  So we must take care to always run
 250 # INSTALL-type commands from the directory containing the Makefile.
 251 # This explains (I think) the cd thisdir seen in several install rules.
 252 INSTALL = @INSTALL@
 253 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 254 INSTALL_DATA = @INSTALL_DATA@
 255 INSTALL_INFO = @INSTALL_INFO@
 256 # By default, we uphold the dignity of our programs.
 257 INSTALL_STRIP =
 258 MKDIR_P = @MKDIR_P@
 259 # Create a link to a file in the same directory as the target.
 260 LN_S_FILEONLY = @LN_S_FILEONLY@
 261
 262 # We use gzip to compress installed .el files.
 263 GZIP_PROG = @GZIP_PROG@
 264 # If non-nil, gzip the installed Info and man pages.
 265 GZIP_INFO = @GZIP_INFO@
 266
 267 # ============================= Targets ==============================
 268
 269 # Program name transformation.
 270 TRANSFORM = @program_transform_name@
 271
 272 # What emacs should be called when installed.
 273 EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'`
 274 EMACS = ${EMACS_NAME}${EXEEXT}
 275 EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
 276
 277 # Subdirectories to make recursively.
 278 SUBDIR = $(NTDIR) lib lib-src src lisp leim
 279
 280 # The subdir makefiles created by config.status.
 281 SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
 282 SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
 283
 284 # Subdirectories to install, and where they'll go.  lib-src's and nt's
 285 # makefiles know how to install them, so we don't do that here.
 286 # Directories that cannot simply be copied, eg info, are treated
 287 # separately.  quail appears twice because in out-of-tree builds, it
 288 # exists twice.
 289 COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
 290 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail
 291
 292 all: ${SUBDIR}
 293
 294 .PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 FRC
 295
 296 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
 297
 298 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 299 # See comments in configure.ac for why it is done this way, as opposed
 300 # to just letting configure generate epaths.h from epaths.in in a
 301 # similar way to how Makefile is made from Makefile.in.
 302 epaths-force: FRC
 303         @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
 304           locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
 305           buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
 306           x_default_search_path=`echo ${x_default_search_path}`; \
 307           gamedir=`echo ${gamedir}`; \
 308           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 309           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
 310           -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
 311           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 312           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 313           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 314           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 315           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 316           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 317           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 318           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') &&                \
 319         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 320
 321 # Convert MSYS-style /x/foo or Windows-style x:\foo file names
 322 # into x:/foo that Windows can grok.
 323 msys_to_w32=sed -e 's,\\\\,/,g' -e 's,^/\([A-Za-z]\)/,\1:/,'
 324
 325 # Transform directory search path and its components.  Original can
 326 # be MSYS or Windows style.  Set path separator to ";", directory
 327 # separator to "/" and transform MSYS-style "/c/" to "c:/".
 328 # Remove empty path components and escape semicolons.
 329 msys_lisppath_to_w32=sed -e 's,\\\\,/,g'                        \
 330         -e 's,\(^\|[:;]\)\([A-Za-z]\):/,\1/\2/,g'               \
 331         -e 's/:/;/g' -e 's,\(^\|;\)/\([A-Za-z]\)/,\1\2:/,g'     \
 332         -e 's/;\+/;/g' -e 's/^;//' -e 's/;$$//' -e 's/;/\\\\;/g'
 333
 334 # Replace "${prefix}" with '%emacs_dir%' (which expands to install
 335 # directory at runtime).
 336 msys_prefix_subst=sed -e 's!\(^\|;\)'"$${prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
 337
 338 # Quote Sed special characters (except backslash and newline) with
 339 # a double backslash.
 340 msys_sed_sh_escape=sed -e 's/[];$$*.^[]/\\\\&/g'
 341
 342 # The w32 build needs a slightly different editing, and it uses
 343 # nt/epaths.nt as the template.
 344 # Use the value of ${locallisppath} supplied by `configure',
 345 # to support the --enable-locallisppath argument.
 346 epaths-force-w32: FRC
 347         @(w32srcdir=`echo "${srcdir}" | ${msys_to_w32}` ;       \
 348           prefixpattern=`echo '${prefix}' | ${msys_to_w32} | ${msys_sed_sh_escape}` ; \
 349           locallisppath=`echo '${locallisppath}' | ${msys_lisppath_to_w32} | ${msys_prefix_subst}` ; \
 350           sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$          \
 351           -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
 352           -e '/^.*#/s/@VER@/${version}/g'                       \
 353           -e '/^.*#/s/@CFG@/${configuration}/g'                 \
 354           -e "/^.*#/s|@SRC@|$${w32srcdir}|g") &&                \
 355         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 356
 357 lib-src src: $(NTDIR) lib
 358
 359 src:    lib-src FRC
 360
 361 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'
 362 # and `leim'.
 363 lisp leim: src
 364
 365 # These targets should be "${SUBDIR} without `src'".
 366 lib lib-src lisp leim nt: Makefile FRC
 367         cd $@ && $(MAKE) all $(MFLAGS)                         \
 368           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 369           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 370
 371 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
 372 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
 373 # constructed yet) or the empty string (otherwise).
 374 # src/Makefile.in uses it to implement conditional dependencies, so that
 375 # files that need bootstrap-emacs to be built do not additionally need
 376 # to be kept fresher than bootstrap-emacs.  Otherwise changing a single
 377 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
 378 # all preloaded elisp files, and only then dump the actual src/emacs, which
 379 # is not wrong, but is overkill in 99.99% of the cases.
 380 src: Makefile FRC
 381         boot=bootstrap-emacs$(EXEEXT);                         \
 382         if [ ! -x "src/$$boot" ]; then                                     \
 383             cd $@; $(MAKE) all $(MFLAGS)                                   \
 384               CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}'         \
 385               LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \
 386         fi;
 387         if [ -r .bzr/checkout/dirstate ]; then                  \
 388             vcswitness="`pwd`/.bzr/checkout/dirstate";  \
 389         fi;                                                     \
 390         cd $@; $(MAKE) all $(MFLAGS)                           \
 391           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 392           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="" \
 393           VCSWITNESS="$$vcswitness"
 394
 395 blessmail: Makefile src FRC
 396         cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \
 397           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 398
 399 # We used to have one rule per */Makefile.in, but that leads to race
 400 # conditions with parallel makes, so let's assume that the time stamp on
 401 # ./Makefile is representative of the time stamp on all the other Makefiles.
 402 #
 403 # config.status overrides MAKEFILE_NAME with a bogus name when creating
 404 # src/epaths.h, so that 'make epaths-force' does not recursively invoke
 405 # config.status and overwrite config.status while executing it (Bug#11214).
 406 #
 407 # 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
 408 # then attempts to build that file.  This forces 'Makefile', 'lib/Makefile',
 409 # etc. to be built without running into similar recursion problems.
 410 MAKEFILE_NAME = Makefile
 411 $(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
 412           $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk
 413         MAKE='$(MAKE)' ./config.status
 414
 415 # Don't erase these files if make is interrupted while refreshing them.
 416 .PRECIOUS: Makefile config.status
 417
 418 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 419         if [ -x ./config.status ]; then \
 420             $(CFG) ./config.status --recheck;   \
 421         else                            \
 422             $(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \
 423         fi
 424
 425 AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
 426
 427 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 428         cd ${srcdir} && autoconf
 429
 430 ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4
 431 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
 432         cd $(srcdir) && aclocal -I m4
 433
 434 AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \
 435   $(srcdir)/lib/gnulib.mk
 436 $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
 437         cd $(srcdir) && automake --gnu -a -c lib/Makefile
 438
 439 # Regenerate files that this makefile would have made, if this makefile
 440 # had been built by Automake.  The name 'am--refresh' is for
 441 # compatibility with subsidiary Automake-generated makefiles.
 442 am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
 443 .PHONY: am--refresh
 444
 445 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 446         @ # Usually, there's no need to rebuild src/config.in just
 447         @ # because stamp-h.in has changed (since building stamp-h.in
 448         @ # refreshes config.in as well), but if config.in is missing
 449         @ # then we really need to do something more.
 450         [ -r "$@" ] || ( cd ${srcdir} && autoheader )
 451 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 452         cd ${srcdir} && autoheader
 453         rm -f $(srcdir)/src/stamp-h.in
 454         echo timestamp > $(srcdir)/src/stamp-h.in
 455
 456 # ==================== Installation ====================
 457
 458 .PHONY: install install-arch-dep install-arch-indep install-doc install-info
 459 .PHONY: install-man install-etc install-strip install-$(NTDIR)
 460 .PHONY: uninstall uninstall-$(NTDIR)
 461
 462 ## If we let lib-src do its own installation, that means we
 463 ## don't have to duplicate the list of utilities to install in
 464 ## this Makefile as well.
 465
 466 install: all install-arch-indep install-doc install-arch-dep install-$(NTDIR) blessmail
 467         @true
 468
 469 ## Ensure that $subdir contains a subdirs.el file.
 470 ## Here and elsewhere, we set the umask so that any created files are
 471 ## world-readable.
 472 ## TODO it might be good to warn about non-standard permissions of
 473 ## pre-existing directories, but that does not seem easy.
 474 write_subdir=if [ -f $${subdir}/subdirs.el ]; \
 475         then true; \
 476         else \
 477           umask 022; \
 478           ${MKDIR_P} $${subdir}; \
 479           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 480            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 481             > $${subdir}/subdirs.el; \
 482         fi
 483
 484 ### Install the executables that were compiled specifically for this machine.
 485 ### We do install-arch-indep first because the executable needs the
 486 ### Lisp files and DOC file to work properly.
 487 install-arch-dep: src install-arch-indep install-doc install-$(NTDIR)
 488         umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
 489         cd lib-src && \
 490           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 491             exec_prefix=${exec_prefix} bindir=${bindir} \
 492             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 493             INSTALL_STRIP=${INSTALL_STRIP}
 494         if test "${ns_self_contained}" = "no"; then \
 495           ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
 496           chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) || true; \
 497           if test "x${NO_BIN_LINK}" = x; then \
 498             rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
 499             cd $(DESTDIR)${bindir} && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
 500           fi; \
 501         else \
 502           subdir=${ns_appresdir}/site-lisp; \
 503           ${write_subdir} || exit 1; \
 504           rm -rf ${ns_appresdir}/share; \
 505         fi
 506
 507 ### Windows-specific install target for installing programs produced
 508 ### in nt/, and its Posix do-nothing shadow.
 509 install-:
 510 install-nt:
 511         cd $(NTDIR) && \
 512           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 513             exec_prefix=${exec_prefix} bindir=${bindir} \
 514             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 515             INSTALL_STRIP=${INSTALL_STRIP}
 516
 517 ## In the share directory, we are deleting:
 518 ## applications (with emacs.desktop, also found in etc/)
 519 ## emacs (basically empty except for unneeded site-lisp directories)
 520 ## icons (duplicates etc/images/icons/hicolor)
 521
 522 ## This is install-etc for everything except self-contained-ns builds.
 523 ## For them, it is empty.
 524 INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
 525
 526 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 527 ## Needs to be the user running install, so configure can't set it.
 528 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 529           `id -un 2> /dev/null`; do \
 530           [ -n "$${installuser}" ] && break ; \
 531         done
 532
 533 ### Install the files that are machine-independent.
 534 ### Most of them come straight from the distribution; the exception is
 535 ### the DOC file, which is copied from the build directory.
 536
 537 ## We delete each directory in ${COPYDESTS} before we copy into it;
 538 ## that way, we can reinstall over directories that have been put in
 539 ## place with their files read-only (perhaps because they are checked
 540 ## into RCS).  In order to make this safe, we make sure that the
 541 ## source exists and is distinct from the destination.
 542
 543 ## We delete etc/DOC* because there may be irrelevant DOC files from
 544 ## other builds in the source directory.  This is ok because we just
 545 ## deleted the entire installed etc/ directory and recreated it.
 546 ## install-doc installs the relevant DOC.
 547
 548 ## Note that the Makefiles in the etc directory are potentially useful
 549 ## in an installed Emacs, so should not be excluded.
 550
 551 ## We used to create locallisppath, but if it points to non-standard
 552 ## locations, is not really Emacs's job to create these directories,
 553 ## so it is no longer done.
 554
 555 ## Note that we use tar instead of plain old cp -R/-r because the latter
 556 ## is apparently not portable (even in 2012!).
 557 ## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
 558 ## I have no idea which platforms Emacs supports where cp -R does not
 559 ## work correctly, and therefore no idea when tar can be replaced.
 560 ## See also these comments from 2004 about cp -r working fine:
 561 ## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
 562 install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
 563         -set ${COPYDESTS} ; \
 564         unset CDPATH; \
 565         $(set_installuser); \
 566         for dir in ${COPYDIR} ; do \
 567           [ -d $${dir} ] || exit 1 ; \
 568           dest=$$1 ; shift ; \
 569           [ -d $${dest} ] && \
 570             [ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \
 571             continue ; \
 572           if [ "$${dir}" = "leim/quail" ]; then \
 573             [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \
 574               continue ; \
 575           else \
 576             rm -rf $${dest} ; \
 577             umask 022; ${MKDIR_P} $${dest} ; \
 578           fi ; \
 579           echo "Copying $${dir} to $${dest}..." ; \
 580           (cd $${dir}; tar -chf - . ) \
 581             | (cd $${dest}; umask 022; \
 582                tar -xvf - && cat > /dev/null) || exit 1; \
 583           [ "$${dir}" != "${srcdir}/etc" ] || rm -f $${dest}/DOC* ; \
 584           for subdir in `find $${dest} -type d -print` ; do \
 585             chmod a+rx $${subdir} ; \
 586             rm -f $${subdir}/.gitignore ; \
 587             rm -f $${subdir}/.arch-inventory ; \
 588             rm -f $${subdir}/.DS_Store ; \
 589             rm -f $${subdir}/\#* ; \
 590             rm -f $${subdir}/.\#* ; \
 591             rm -f $${subdir}/*~ ; \
 592             rm -f $${subdir}/*.orig ; \
 593             rm -f $${subdir}/ChangeLog* ; \
 594             [ "$${dir}" != "${srcdir}/etc" ] && \
 595               rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
 596           done ; \
 597           find $${dest} -exec chown $${installuser} {} ';' ;\
 598         done
 599         -rm -f $(DESTDIR)${leimdir}/leim-list.el
 600         ${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el
 601         -rm -f $(DESTDIR)${lispdir}/subdirs.el
 602         umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir}
 603         subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
 604           ${write_subdir}
 605         subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
 606           ${write_subdir} || true
 607         [ -z "${GZIP_PROG}" ] || \
 608           ( echo "Compressing *.el ..." ; \
 609             unset CDPATH; \
 610             thisdir=`/bin/pwd`; \
 611             for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \
 612               cd $${thisdir} ; \
 613               cd $${dir} || exit 1 ; \
 614               for f in `find . -name "*.elc" -print`; do \
 615                 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
 616               done ; \
 617             done )
 618         -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
 619
 620 ## The above chmods are needed because "umask 022; tar ..." is not
 621 ## guaranteed to do the right thing; eg if we are root and tar is
 622 ## preserving source permissions.
 623
 624 ## Note that install-arch-indep deletes and recreates the entire
 625 ## installed etc/ directory, so we need it to run before this does.
 626 install-doc: src install-arch-indep
 627         -unset CDPATH; \
 628         umask 022; ${MKDIR_P} $(DESTDIR)${docdir} ; \
 629         if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${docdir}; /bin/pwd` ]; \
 630         then \
 631            docfile="DOC"; \
 632            echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
 633            ${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${docdir}/$${docfile}; \
 634            $(set_installuser); \
 635              chown $${installuser} $(DESTDIR)${docdir}/$${docfile} || true ; \
 636         else true; fi
 637
 638 install-info: info
 639         umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
 640         -unset CDPATH; \
 641         thisdir=`/bin/pwd`; \
 642         [ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \
 643           (cd $(DESTDIR)${infodir};  \
 644            [ -f dir ] || \
 645              (cd $${thisdir}; \
 646               ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
 647            info_misc=`cd $${thisdir}/doc/misc && \
 648                 $(QUIET_SUBMAKE) $(MAKE) -s echo-info \
 649            `; \
 650            cd ${srcdir}/info ; \
 651            for elt in ${INFO_NONMISC} $${info_misc}; do \
 652               test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
 653               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 654                (cd $${thisdir}; \
 655                 ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
 656                 ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
 657                 rm -f $(DESTDIR)${infodir}/$$f.gz; \
 658                 ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
 659               done; \
 660              (cd $${thisdir}; \
 661               ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 662            done)
 663
 664 ## "gzip || true" is because some gzips exit with non-zero status
 665 ## if compression would not reduce the file size.  Eg, the gzip in
 666 ## OpenBSD 4.9 seems to do this (2013/03).  In Emacs, this can
 667 ## only happen with the tiny ctags.1 manpage.  We don't really care if
 668 ## ctags.1 is compressed or not.  "gzip -f" is another option here,
 669 ## but not sure if portable.
 670 install-man:
 671         umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
 672         thisdir=`/bin/pwd`; \
 673         cd ${mansrcdir}; \
 674         for page in *.1; do \
 675           dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
 676           (cd $${thisdir}; \
 677            ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${dest}); \
 678           ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
 679           rm -f $(DESTDIR)${man1dir}/$${dest}.gz; \
 680           ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${dest} || true; \
 681         done
 682
 683 ## Install those items from etc/ that need to end up elsewhere.
 684
 685 ## If you prefer, choose "emacs22" at installation time.
 686 ## Note: emacs22 does not have all the resolutions.
 687 EMACS_ICON=emacs
 688
 689 install-etc:
 690         umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
 691         tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \
 692         emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \
 693         sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \
 694           -e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \
 695           ${srcdir}/etc/emacs.desktop > $${tmp}; \
 696         ${INSTALL_DATA} $${tmp} $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop; \
 697         rm -f $${tmp}
 698         thisdir=`/bin/pwd`; \
 699         cd ${iconsrcdir} || exit 1; umask 022 ; \
 700         for dir in */*/apps */*/mimetypes; do \
 701           [ -d $${dir} ] || continue ; \
 702           ( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \
 703           for icon in $${dir}/${EMACS_ICON}[.-]*; do \
 704             [ -r $${icon} ] || continue ; \
 705             ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
 706             dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
 707             ( cd $${thisdir}; \
 708               ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${dir}/$${dest} ) \
 709             || exit 1; \
 710           done ; \
 711         done
 712
 713 ### Build Emacs and install it, stripping binaries while installing them.
 714 install-strip:
 715         $(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
 716
 717 ### Delete all the installed files that the `install' target would
 718 ### create (but not the noninstalled files such as `make all' would create).
 719 ###
 720 ### Don't delete the lisp and etc directories if they're in the source tree.
 721 uninstall: uninstall-$(NTDIR)
 722         cd lib-src &&                                   \
 723          $(MAKE) $(MFLAGS) uninstall                    \
 724             prefix=${prefix} exec_prefix=${exec_prefix} \
 725             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
 726
 727         -unset CDPATH; \
 728         for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do        \
 729           if [ -d $${dir} ]; then                       \
 730             case `cd $${dir} ; /bin/pwd` in             \
 731               `cd ${srcdir} ; /bin/pwd`* ) ;;           \
 732               * ) rm -rf $${dir} ;;                     \
 733             esac ;                                      \
 734             case $${dir} in                             \
 735               $(DESTDIR)${datadir}/emacs/${version}/* )         \
 736                 rm -rf $(DESTDIR)${datadir}/emacs/${version}    \
 737               ;;                                        \
 738             esac ;                                      \
 739           fi ;                                          \
 740         done
 741         -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
 742         thisdir=`/bin/pwd`; \
 743         (info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
 744          if cd $(DESTDIR)${infodir}; then \
 745            for elt in ${INFO_NONMISC} $${info_misc}; do \
 746              (cd $${thisdir}; \
 747               $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 748              if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 749                 ext=.gz; else ext=; fi; \
 750              rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
 751            done; \
 752          fi)
 753         (if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 754             ext=.gz; else ext=; fi; \
 755          if cd ${mansrcdir}; then \
 756            for page in *.1; do \
 757              rm -f $(DESTDIR)${man1dir}/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
 758          fi)
 759         (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS) || true)
 760         (if cd $(DESTDIR)${icondir}; then \
 761            rm -f hicolor/*x*/apps/${EMACS_NAME}.png \
 762              hicolor/scalable/apps/${EMACS_NAME}.svg \
 763              hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \
 764         fi)
 765         -rm -f $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop
 766         for file in snake-scores tetris-scores; do \
 767           file=$(DESTDIR)${gamedir}/$${file}; \
 768           [ -s $${file} ] || rm -f $$file; \
 769         done
 770
 771 ### Windows-specific uninstall target for removing programs produced
 772 ### in nt/, and its Posix do-nothing shadow.
 773 uninstall-:
 774 uninstall-nt:
 775         cd $(NTDIR) &&                                  \
 776          $(MAKE) $(MFLAGS) uninstall                    \
 777             prefix=${prefix} exec_prefix=${exec_prefix} \
 778             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
 779
 780 FRC:
 781
 782 # ==================== Cleaning up and miscellanea ====================
 783
 784 .PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
 785
 786 ### `mostlyclean'
 787 ###      Like `clean', but may refrain from deleting a few files that people
 788 ###      normally don't want to recompile.  For example, the `mostlyclean'
 789 ###      target for GCC does not delete `libgcc.a', because recompiling it
 790 ###      is rarely necessary and takes a lot of time.
 791 mostlyclean: FRC
 792         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 793         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 794         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 795         (cd lib;      $(MAKE) $(MFLAGS) mostlyclean)
 796         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 797         (cd nt;       $(MAKE) $(MFLAGS) mostlyclean)
 798         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) mostlyclean)
 799         -(cd doc/misc &&   $(MAKE) $(MFLAGS) mostlyclean)
 800         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) mostlyclean)
 801         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)
 802         (cd leim;     $(MAKE) $(MFLAGS) mostlyclean)
 803
 804 ### `clean'
 805 ###      Delete all files from the current directory that are normally
 806 ###      created by building the program.  Don't delete the files that
 807 ###      record the configuration.  Also preserve files that could be made
 808 ###      by building, but normally aren't because the distribution comes
 809 ###      with them.
 810 ###
 811 ###      Delete `.dvi' files here if they are not part of the distribution.
 812 clean: FRC
 813         -rm -f etc/emacs.tmpdesktop
 814         (cd src;      $(MAKE) $(MFLAGS) clean)
 815         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 816         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 817         (cd lib;      $(MAKE) $(MFLAGS) clean)
 818         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 819         (cd nt;       $(MAKE) $(MFLAGS) clean)
 820         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 821         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 822         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 823         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 824         (cd leim;     $(MAKE) $(MFLAGS) clean)
 825         (cd nextstep && $(MAKE) $(MFLAGS) clean)
 826
 827 ### `bootclean'
 828 ###      Delete all files that need to be remade for a clean bootstrap.
 829 top_bootclean=\
 830         rm -f config.cache config.log
 831 ### `distclean'
 832 ###      Delete all files from the current directory that are created by
 833 ###      configuring or building the program.  If you have unpacked the
 834 ###      source and built the program without creating any other files,
 835 ###      `make distclean' should leave only the files that were in the
 836 ###      distribution.
 837 top_distclean=\
 838         ${top_bootclean}; \
 839         rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
 840 distclean: FRC
 841         (cd src;      $(MAKE) $(MFLAGS) distclean)
 842         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 843         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 844         (cd lib;      $(MAKE) $(MFLAGS) distclean)
 845         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 846         (cd nt;       $(MAKE) $(MFLAGS) distclean)
 847         (cd doc/emacs &&    $(MAKE) $(MFLAGS) distclean)
 848         (cd doc/misc &&    $(MAKE) $(MFLAGS) distclean)
 849         (cd doc/lispref &&    $(MAKE) $(MFLAGS) distclean)
 850         (cd doc/lispintro &&    $(MAKE) $(MFLAGS) distclean)
 851         (cd leim;     $(MAKE) $(MFLAGS) distclean)
 852         (cd lisp;     $(MAKE) $(MFLAGS) distclean)
 853         (cd nextstep && $(MAKE) $(MFLAGS) distclean)
 854         ${top_distclean}
 855
 856 ### `bootstrap-clean'
 857 ###      Delete everything that can be reconstructed by `make' and that
 858 ###      needs to be deleted in order to force a bootstrap from a clean state.
 859 bootstrap-clean: FRC
 860         (cd src;      $(MAKE) $(MFLAGS) bootstrap-clean)
 861         (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
 862         (cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)
 863         (cd lib;      $(MAKE) $(MFLAGS) maintainer-clean)
 864         (cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)
 865         (cd nt;       $(MAKE) $(MFLAGS) maintainer-clean)
 866         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) maintainer-clean)
 867         -(cd doc/misc &&   $(MAKE) $(MFLAGS) maintainer-clean)
 868         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)
 869         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)
 870         (cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)
 871         (cd lisp;     $(MAKE) $(MFLAGS) bootstrap-clean)
 872         (cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean)
 873         [ ! -f config.log ] || mv -f config.log config.log~
 874         ${top_bootclean}
 875
 876 ### `maintainer-clean'
 877 ###      Delete everything from the current directory that can be
 878 ###      reconstructed with this Makefile.  This typically includes
 879 ###      everything deleted by distclean, plus more: C source files
 880 ###      produced by Bison, tags tables, info files, and so on.
 881 ###
 882 ###      One exception, however: `make maintainer-clean' should not delete
 883 ###      `configure' even if `configure' can be remade using a rule in the
 884 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 885 ###      anything that needs to exist in order to run `configure' and then
 886 ###      begin to build the program.
 887 top_maintainer_clean=\
 888         ${top_distclean}; \
 889         rm -fr autom4te.cache
 890 maintainer-clean: bootstrap-clean FRC
 891         (cd src;      $(MAKE) $(MFLAGS) maintainer-clean)
 892         (cd lisp;     $(MAKE) $(MFLAGS) maintainer-clean)
 893         ${top_maintainer_clean}
 894
 895 ### This doesn't actually appear in the coding standards, but Karl
 896 ### says GCC supports it, and that's where the configuration part of
 897 ### the coding standards seem to come from.  It's like distclean, but
 898 ### it deletes backup and autosave files too.
 899 extraclean:
 900         for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 901         ${top_maintainer_clean}
 902         -rm -f config-tmp-*
 903         -rm -f *~ \#*
 904
 905 # The src subdir knows how to do the right thing
 906 # even when the build directory and source dir are different.
 907 .PHONY: TAGS tags
 908 TAGS tags: lib lib-src src
 909         cd src; $(MAKE) $(MFLAGS) tags
 910
 911 check:
 912         @if test ! -d test/automated; then \
 913           echo "You do not seem to have the test/ directory."; \
 914           echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
 915         else \
 916           cd test/automated && $(MAKE) $(MFLAGS) check; \
 917         fi
 918
 919 dist:
 920         cd ${srcdir}; ./make-dist
 921
 922 DVIS  = lispref-dvi  lispintro-dvi  emacs-dvi  misc-dvi
 923 HTMLS = lispref-html lispintro-html emacs-html misc-html
 924 INFOS = lispref-info lispintro-info emacs-info misc-info
 925 PDFS  = lispref-pdf  lispintro-pdf  emacs-pdf  misc-pdf
 926 PSS   = lispref-ps   lispintro-ps   emacs-ps # no misc-ps
 927
 928 DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
 929 $(DOCS):
 930         t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2
 931
 932 .PHONY: $(DOCS) docs pdf ps
 933 .PHONY: info dvi dist check html info-real force-info check-info-dir
 934
 935 docs: $(DOCS)
 936 dvi: $(DVIS)
 937 html: $(HTMLS)
 938 info-real: $(INFOS)
 939 pdf: $(PDFS)
 940 ps: $(PSS)
 941
 942 force-info:
 943 # Note that man/Makefile knows how to put the info files in $(srcdir),
 944 # so we can do ok running make in the build dir.
 945 # This used to have a clause that exited with an error if MAKEINFO = no.
 946 # But it is inappropriate to do so without checking if makeinfo is
 947 # actually needed - it is not if the info files are up-to-date.  (Bug#3982)
 948 # Only the doc/*/Makefiles can decide that, so we let those rules run
 949 # and give a standard error if makeinfo is needed but missing.
 950 # While it would be nice to give a more detailed error message, that
 951 # would require changing every rule in doc/ that builds an info file,
 952 # and it's not worth it.  This case is only relevant if you download a
 953 # release, then change the .texi files.
 954 info: force-info
 955         @if test "$(HAVE_MAKEINFO)" = "no"; then \
 956           echo "Configured --without-makeinfo, not building manuals" ; \
 957         else \
 958           $(MAKE) $(MFLAGS) info-real ; \
 959         fi
 960
 961 # The info/dir file must be updated by hand when new manuals are added.
 962 check-info-dir: info
 963         cd info ; \
 964         missing= ; \
 965         for file in *; do \
 966           test -f "$${file}" || continue ; \
 967           case $${file} in \
 968             *-[0-9]*|COPYING|dir) continue ;; \
 969           esac ; \
 970           file=`echo $${file} | sed 's/\.info//'` ; \
 971           grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
 972         done ; \
 973         if test -n "$${missing}"; then \
 974           echo "Missing info/dir entries: $${missing}" ; \
 975           exit 1 ; \
 976         fi ; \
 977         echo "info/dir is OK"
 978
 979 #### Bootstrapping.
 980
 981 ### This first cleans the lisp subdirectory, removing all compiled
 982 ### Lisp files.  Then re-run make to build all the files anew.
 983
 984 .PHONY: bootstrap
 985
 986 # Bootstrapping does the following:
 987 #  * Remove files to start from a bootstrap-clean slate.
 988 #  * Run autogen.sh, falling back on copy_autogen if autogen.sh fails.
 989 #  * Rebuild Makefile, to update the build procedure itself.
 990 #  * Do the actual build.
 991 bootstrap: bootstrap-clean FRC
 992         cd $(srcdir) && { ./autogen.sh || autogen/copy_autogen; }
 993         $(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
 994         $(MAKE) $(MFLAGS) info all
 995
 996 .PHONY: check-declare
 997
 998 check-declare:
 999         @if [ ! -f $(srcdir)/src/emacs ]; then \
1000           echo "You must build Emacs to use this command"; \
1001           exit 1; \
1002         fi
1003         (cd leim; $(MAKE) $(MFLAGS) $@)
1004         (cd lisp; $(MAKE) $(MFLAGS) $@)