doc/lispref/two-volume.make

   1 # Copyright (C) 2007-2018 Free Software Foundation, Inc.
   2 # See end for copying conditions.
   3
   4 # although it would be nice to use tex rather than pdftex to avoid
   5 # colors, spurious warnings about names being referenced but not
   6 # existing, etc., dvips | ps2pdf doesn't preserve the page size.
   7 # Instead of creating a special dvips config file, put up with the warnings.
   8 # (Note added 2012/05: for me, using texlive-2007-57, pdftex
   9 # doesn't work for reason, but tex does.)
  10 texinfodir=../misc
  11 emacsdir=../emacs
  12
  13 tex = TEXINPUTS=".:$(texinfodir):${emacsdir}:${TEXINPUTS}" pdftex -interaction=nonstopmode
  14
  15 all: vol1.pdf vol2.pdf
  16
  17 # There's probably a better way to do this, without using a temp file.
  18 # Something like:
  19 # tex -jobname=vol1 '\def\SETVOL1 \input{elisp.texi}'
  20 # but I don't know what to use for "\def\SETVOL1".
  21 tex1 = sed '/^@setfilename/a\
  22 @set VOL1' elisp.texi > elisp1tmp.tex && $(tex) -jobname=vol1 elisp1tmp.tex
  23
  24 tex2 = sed '/^@setfilename/a\
  25 @set VOL2' elisp.texi > elisp2tmp.tex && $(tex) -jobname=vol2 elisp2tmp.tex
  26
  27 # elisp.texi specially defines \tocreadfilename when VOL1 or VOL2 is
  28 # set, so we can use our premade .toc's.
  29 #
  30 vol1.pdf: elisp1med-fns-ready elisp1med-aux-ready elisp1med-toc-ready
  31         @printf '\f Final TeX run for volume 1...\n'
  32         cp elisp1med-toc-ready elisp1-toc-ready.toc
  33         cp elisp1med-fns-ready vol1.fns
  34         cp elisp1med-aux-ready vol1.aux
  35         $(tex1)
  36 #
  37 vol2.pdf: elisp2med-fns-ready elisp2med-aux-ready elisp2med-toc-ready
  38         @echo "Final TeX run for volume 2..."
  39         cp elisp2med-toc-ready elisp2-toc-ready.toc
  40         cp elisp2med-fns-ready vol2.fns
  41         cp elisp2med-aux-ready vol2.aux
  42         $(tex2)
  43
  44 # \f intermediate toc files.
  45 #
  46 # vol1 toc: volume 1, page break, volume 2 (with II: prepended).
  47 elisp1med-toc-ready: elisp1med-init elisp2med-init
  48         echo '@unnchapentry{@b{Volume 1}}{10001}{vol1}{}' >$@
  49         cat elisp1med-toc >>$@
  50         echo '@page' >>$@
  51         echo '@unnchapentry{@b{Volume 2}}{10001}{vol2}{}' >>$@
  52         sed 's/{\([^}]*\)}$$/{II:\1}/' elisp2med-toc >>$@
  53 #
  54 # vol2 toc: volume 1 (with I: prepended), page break, volume 2.
  55 elisp2med-toc-ready: elisp1med-init elisp2med-init
  56         echo '@unnchapentry{@b{Volume 1}}{10001}{vol1}{}' >$@
  57         sed 's/{\([^}]*\)}$$/{I:\1}/' elisp1med-toc >>$@
  58         echo '@page' >>$@
  59         echo '@unnchapentry{@b{Volume 2}}{10001}{vol2}{}' >>$@
  60         cat elisp2med-toc >>$@
  61
  62
  63 # \f intermediate aux files.
  64 #
  65 # append vol2's fixed aux to normal vol1.
  66 elisp1med-aux-ready: elisp2med-aux-vol-added
  67         cat elisp1med-aux $< >$@
  68 #
  69 # prepend vol1's fixed aux to vol2.
  70 elisp2med-aux-ready: elisp1med-aux-vol-added
  71         cat $< elisp2med-aux >$@
  72
  73 # on -pg entries, append volume number after page number.
  74 elisp1med-aux-vol-added: elisp1med-init
  75         sed 's/-pg}{\(.*\)}$$/-pg}{\1, vol.@tie1}/' elisp1med-aux >$@
  76 #
  77 elisp2med-aux-vol-added: elisp2med-init
  78         sed 's/-pg}{\(.*\)}$$/-pg}{\1, vol.@tie2}/' elisp2med-aux >$@
  79
  80 # \f intermediate index (fns) file.
  81 #
  82 elisp1med-fns-ready: elisp1med-fn-vol-added elisp2med-fn-vol-added
  83         cat elisp2med-fn-vol-added >>vol1.fn
  84         texindex vol1.fn
  85         cp vol1.fns $@
  86 #
  87 elisp2med-fns-ready: elisp1med-fn-vol-added elisp2med-fn-vol-added
  88         cat elisp1med-fn-vol-added >>vol2.fn
  89         texindex vol2.fn
  90         cp vol2.fns $@
  91
  92 # Insert volume number (I: or II:) into index file.
  93 elisp1med-fn-vol-added: elisp1med-init
  94         cp vol1.fn elisp1med-fn
  95         sed 's/}{/}{I:/' elisp1med-fn >$@
  96 #
  97 elisp2med-fn-vol-added: elisp2med-init
  98         cp vol2.fn elisp2med-fn
  99         sed 's/}{/}{II:/' elisp2med-fn >$@
 100
 101 # -----------------------------------------------------------------------------
 102 # everything above is essentially a duplicate of everything below. sorry.
 103 # -----------------------------------------------------------------------------
 104
 105 # \f intermediate TeX runs.
 106 #
 107 # this generates what would be the final versions -- except the page
 108 # numbers aren't right.  The process of adding the I: and II: changes
 109 # the page breaks, so a few index entries, at least are wrong.  (In
 110 # 2007, x-meta-keysym in vol.II ended up on page 374 when the index had
 111 # it on page 375 from the initial run.)
 112 #
 113 # So, we start all over again, from these fns/aux/toc files.
 114 #
 115 elisp1med-init: elisp1-fns-ready elisp1-aux-ready elisp1init-toc-ready $(texinfodir)/texinfo.tex
 116         @printf '\f Intermediate TeX run for volume 1...\n'
 117         cp elisp1init-toc-ready elisp1-toc-ready.toc
 118         cp elisp1-fns-ready vol1.fns
 119         cp elisp1-aux-ready vol1.aux
 120         $(tex1)
 121         texindex vol1.??
 122         mv vol1.aux elisp1med-aux
 123         mv vol1.toc elisp1med-toc
 124 #
 125 elisp2med-init: elisp2-fns-ready elisp2-aux-ready elisp2init-toc-ready $(texinfodir)/texinfo.tex
 126         @echo "Final TeX run for volume 2..."
 127         cp elisp2init-toc-ready elisp2-toc-ready.toc
 128         cp elisp2-fns-ready vol2.fns
 129         cp elisp2-aux-ready vol2.aux
 130         $(tex2)
 131         texindex vol2.??
 132         mv vol2.aux elisp2med-aux
 133         mv vol2.toc elisp2med-toc
 134
 135
 136 # \f initial toc files.
 137 #
 138 # vol1 toc: volume 1, page break, volume 2 (with II: prepended).
 139 elisp1init-toc-ready: elisp1-init elisp2-init
 140         echo '@unnchapentry{@b{Volume 1}}{10001}{vol1}{}' >$@
 141         cat elisp1-toc >>$@
 142         echo '@page' >>$@
 143         echo '@unnchapentry{@b{Volume 2}}{10001}{vol2}{}' >>$@
 144         sed 's/{\([^}]*\)}$$/{II:\1}/' elisp2-toc >>$@
 145 #
 146 # vol2 toc: volume 1 (with I: prepended), page break, volume 2.
 147 elisp2init-toc-ready: elisp1-init elisp2-init
 148         echo '@unnchapentry{@b{Volume 1}}{10001}{vol1}{}' >$@
 149         sed 's/{\([^}]*\)}$$/{I:\1}/' elisp1-toc >>$@
 150         echo '@page' >>$@
 151         echo '@unnchapentry{@b{Volume 2}}{10001}{vol2}{}' >>$@
 152         cat elisp2-toc >>$@
 153
 154
 155 # \f initial aux files.
 156 #
 157 # append vol2's fixed aux to normal vol1.  The initial runs saved
 158 # elisp1-aux and elisp2-aux.
 159 elisp1-aux-ready: elisp2-aux-vol-added
 160         cat elisp1-aux $< >$@
 161 #
 162 # prepend vol1's fixed aux to vol2.
 163 elisp2-aux-ready: elisp1-aux-vol-added
 164         cat $< elisp2-aux >$@
 165
 166 # on -pg entries, append volume number after page number.
 167 elisp1-aux-vol-added: elisp1-init
 168         sed 's/-pg}{\(.*\)}$$/-pg}{\1, vol.@tie1}/' elisp1-aux >$@
 169 #
 170 elisp2-aux-vol-added: elisp2-init
 171         sed 's/-pg}{\(.*\)}$$/-pg}{\1, vol.@tie2}/' elisp2-aux >$@
 172
 173 # \f initial index (fns) file.
 174 #
 175 # Append other volume's index entries to this one's.
 176 # Index entries in this volume will then take precedence.
 177 elisp1-fns-ready: elisp1-fn-vol-added elisp2-fn-vol-added
 178         cat elisp2-fn-vol-added >>vol1.fn
 179         texindex vol1.fn
 180         cp vol1.fns $@
 181 #
 182 elisp2-fns-ready: elisp1-fn-vol-added elisp2-fn-vol-added
 183         cat elisp1-fn-vol-added >>vol2.fn
 184         texindex vol2.fn
 185         cp vol2.fns $@
 186
 187 # Insert volume number (I: or II:) into index file.
 188 elisp1-fn-vol-added: elisp1-init
 189         cp vol1.fn elisp1-fn
 190         sed 's/}{/}{I:/' elisp1-fn >$@
 191 #
 192 elisp2-fn-vol-added: elisp2-init
 193         cp vol2.fn elisp2-fn
 194         sed 's/}{/}{II:/' elisp2-fn >$@
 195
 196
 197 # \f initial TeX runs.
 198 #
 199 # We use the .fn, .aux, and .toc files created here in subsequent
 200 # processing.  The page numbers generated here will not be correct yet,
 201 # but we run texindex and TeX a second time just to get them closer.
 202 # Otherwise it might take even longer for them to converge.
 203 #
 204 elisp1-init: elisp.texi
 205         @printf '\f Initial TeX run for volume 1...\n'
 206         rm -f vol1.aux vol1.toc
 207         $(tex1)
 208         texindex vol1.??
 209         mv vol1.aux elisp1-aux
 210         mv vol1.toc elisp1-toc
 211         touch $@
 212 #
 213 elisp2-init: elisp.texi
 214         @echo "Initial TeX run for volume 2..."
 215         rm -f vol2.aux vol2.toc
 216         $(tex2)
 217         texindex vol2.??
 218         mv vol2.aux elisp2-aux
 219         mv vol2.toc elisp2-toc
 220         touch $@
 221
 222 # COPYING CONDITIONS
 223 #
 224 # This file is free software: you can redistribute it and/or modify
 225 # it under the terms of the GNU General Public License as published by
 226 # the Free Software Foundation, either version 3 of the License, or
 227 # (at your option) any later version.
 228 #
 229 # This file is distributed in the hope that it will be useful,
 230 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 231 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 232 # GNU General Public License for more details.
 233 #
 234 # You should have received a copy of the GNU General Public License
 235 # along with this file.  If not, see <https://www.gnu.org/licenses/>.