*** empty log message ***
[emacs.git] / lisp / isearch.el
blob9a4fb86b2b0207d315301bfa05002f17c32f8d3e
1 ;;; isearch.el --- incremental search minor mode.
3 ;; Copyright (C) 1992, 93, 94, 95, 96, 97, 1999, 2000
4 ;; Free Software Foundation, Inc.
6 ;; Author: Daniel LaLiberte <liberte@cs.uiuc.edu>
7 ;; Maintainer: FSF
8 ;; Keywords: matching
10 ;; This file is part of GNU Emacs.
12 ;; GNU Emacs is free software; you can redistribute it and/or modify
13 ;; it under the terms of the GNU General Public License as published by
14 ;; the Free Software Foundation; either version 2, or (at your option)
15 ;; any later version.
17 ;; GNU Emacs is distributed in the hope that it will be useful,
18 ;; but WITHOUT ANY WARRANTY; without even the implied warranty of
19 ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 ;; GNU General Public License for more details.
22 ;; You should have received a copy of the GNU General Public License
23 ;; along with GNU Emacs; see the file COPYING. If not, write to the
24 ;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
25 ;; Boston, MA 02111-1307, USA.
27 ;;; Commentary:
29 ;; Instructions
31 ;; For programmed use of isearch-mode, e.g. calling (isearch-forward),
32 ;; isearch-mode behaves modally and does not return until the search
33 ;; is completed. It uses a recursive-edit to behave this way.
35 ;; The key bindings active within isearch-mode are defined below in
36 ;; `isearch-mode-map' which is given bindings close to the default
37 ;; characters of the original isearch.el. With `isearch-mode',
38 ;; however, you can bind multi-character keys and it should be easier
39 ;; to add new commands. One bug though: keys with meta-prefix cannot
40 ;; be longer than two chars. Also see minibuffer-local-isearch-map
41 ;; for bindings active during `isearch-edit-string'.
43 ;; isearch-mode should work even if you switch windows with the mouse,
44 ;; in which case isearch-mode is terminated automatically before the
45 ;; switch.
47 ;; The search ring and completion commands automatically put you in
48 ;; the minibuffer to edit the string. This gives you a chance to
49 ;; modify the search string before executing the search. There are
50 ;; three commands to terminate the editing: C-s and C-r exit the
51 ;; minibuffer and search forward and reverse respectively, while C-m
52 ;; exits and does a nonincremental search.
54 ;; Exiting immediately from isearch uses isearch-edit-string instead
55 ;; of nonincremental-search, if search-nonincremental-instead is non-nil.
56 ;; The name of this option should probably be changed if we decide to
57 ;; keep the behavior. No point in forcing nonincremental search until
58 ;; the last possible moment.
60 ;; TODO
61 ;; - Integrate the emacs 19 generalized command history.
62 ;; - Think about incorporating query-replace.
63 ;; - Hooks and options for failed search.
65 ;;; Change Log:
67 ;; Changes before those recorded in ChangeLog:
69 ;; Revision 1.4 92/09/14 16:26:02 liberte
70 ;; Added prefix args to isearch-forward, etc. to switch between
71 ;; string and regular expression searching.
72 ;; Added some support for lemacs.
73 ;; Added general isearch-highlight option - but only for lemacs so far.
74 ;; Added support for frame switching in emacs 19.
75 ;; Added word search option to isearch-edit-string.
76 ;; Renamed isearch-quit to isearch-abort.
77 ;; Numerous changes to comments and doc strings.
78 ;;
79 ;; Revision 1.3 92/06/29 13:10:08 liberte
80 ;; Moved modal isearch-mode handling into isearch-mode.
81 ;; Got rid of buffer-local isearch variables.
82 ;; isearch-edit-string used by ring adjustments, completion, and
83 ;; nonincremental searching. C-s and C-r are additional exit commands.
84 ;; Renamed all regex to regexp.
85 ;; Got rid of found-start and found-point globals.
86 ;; Generalized handling of upper-case chars.
88 ;; Revision 1.2 92/05/27 11:33:57 liberte
89 ;; Emacs version 19 has a search ring, which is supported here.
90 ;; Other fixes found in the version 19 isearch are included here.
92 ;; Also see variables search-caps-disable-folding,
93 ;; search-nonincremental-instead, search-whitespace-regexp, and
94 ;; commands isearch-toggle-regexp, isearch-edit-string.
96 ;; semi-modal isearching is supported.
98 ;; Changes for 1.1
99 ;; 3/18/92 Fixed invalid-regexp.
100 ;; 3/18/92 Fixed yanking in regexps.
102 ;;; Code:
105 ;;; Some additional options and constants.
107 (defgroup isearch nil
108 "Incremental search minor mode."
109 :link '(emacs-commentary-link "isearch")
110 :link '(custom-manual "(emacs)Incremental Search")
111 :prefix "isearch-"
112 :prefix "search-"
113 :group 'matching)
116 (defcustom search-exit-option t
117 "*Non-nil means random control characters terminate incremental search."
118 :type 'boolean
119 :group 'isearch)
121 (defcustom search-slow-window-lines 1
122 "*Number of lines in slow search display windows.
123 These are the short windows used during incremental search on slow terminals.
124 Negative means put the slow search window at the top (normally it's at bottom)
125 and the value is minus the number of lines."
126 :type 'integer
127 :group 'isearch)
129 (defcustom search-slow-speed 1200
130 "*Highest terminal speed at which to use \"slow\" style incremental search.
131 This is the style where a one-line window is created to show the line
132 that the search has reached."
133 :type 'integer
134 :group 'isearch)
136 (defcustom search-upper-case 'not-yanks
137 "*If non-nil, upper case chars disable case fold searching.
138 That is, upper and lower case chars must match exactly.
139 This applies no matter where the chars come from, but does not
140 apply to chars in regexps that are prefixed with `\\'.
141 If this value is `not-yanks', yanked text is always downcased."
142 :type '(choice (const :tag "off" nil)
143 (const not-yanks)
144 (other :tag "on" t))
145 :group 'isearch)
147 (defcustom search-nonincremental-instead t
148 "*If non-nil, do a nonincremental search instead if exiting immediately.
149 Actually, `isearch-edit-string' is called to let you enter the search
150 string, and RET terminates editing and does a nonincremental search."
151 :type 'boolean
152 :group 'isearch)
154 (defcustom search-whitespace-regexp "\\s-+"
155 "*If non-nil, regular expression to match a sequence of whitespace chars.
156 This applies to regular expression incremental search.
157 You might want to use something like \"[ \\t\\r\\n]+\" instead.
158 In the Customization buffer, that is `[' followed by a space,
159 a tab, a carriage return (control-M), a newline, and `]+'."
160 :type 'regexp
161 :group 'isearch)
163 (defcustom search-highlight t
164 "*Non-nil means incremental search highlights the current match."
165 :type 'boolean
166 :group 'isearch)
168 (defcustom search-invisible 'open
169 "If t incremental search can match hidden text.
170 nil means don't match invisible text.
171 If the value is `open', if the text matched is made invisible by
172 an overlay having an `invisible' property and that overlay has a property
173 `isearch-open-invisible', then incremental search will show the contents.
174 \(This applies when using `outline.el' and `hideshow.el'.)"
175 :type '(choice (const :tag "Match hidden text" t)
176 (const :tag "Open overlays" open)
177 (const :tag "Don't match hidden text" nil))
178 :group 'isearch)
180 (defcustom isearch-hide-immediately t
181 "If non-nil, re-hide an invisible match right away.
182 This variable makes a difference when `search-invisible' is set to `open'.
183 It means that after search makes some invisible text visible
184 to show the match, it makes the text invisible again when the match moves.
185 Ordinarily the text becomes invisible again at the end of the search."
186 :type 'boolean
187 :group 'isearch)
189 (defvar isearch-mode-hook nil
190 "Function(s) to call after starting up an incremental search.")
192 (defvar isearch-mode-end-hook nil
193 "Function(s) to call after terminating an incremental search.")
195 ;;; Search ring.
197 (defvar search-ring nil
198 "List of search string sequences.")
199 (defvar regexp-search-ring nil
200 "List of regular expression search string sequences.")
202 (defcustom search-ring-max 16
203 "*Maximum length of search ring before oldest elements are thrown away."
204 :type 'integer
205 :group 'isearch)
206 (defcustom regexp-search-ring-max 16
207 "*Maximum length of regexp search ring before oldest elements are thrown away."
208 :type 'integer
209 :group 'isearch)
211 (defvar search-ring-yank-pointer nil
212 "Index in `search-ring' of last string reused.
213 nil if none yet.")
214 (defvar regexp-search-ring-yank-pointer nil
215 "Index in `regexp-search-ring' of last string reused.
216 nil if none yet.")
218 (defcustom search-ring-update nil
219 "*Non-nil if advancing or retreating in the search ring should cause search.
220 Default value, nil, means edit the string instead."
221 :type 'boolean
222 :group 'isearch)
224 ;;; Define isearch-mode keymap.
226 (defvar isearch-mode-map nil
227 "Keymap for isearch-mode.")
229 (or isearch-mode-map
230 (let* ((i 0)
231 (map (make-keymap)))
232 (or (vectorp (nth 1 map))
233 (char-table-p (nth 1 map))
234 (error "The initialization of isearch-mode-map must be updated"))
235 ;; Make all multibyte characters search for themselves.
236 (let ((l (generic-character-list))
237 (table (nth 1 map)))
238 (while l
239 (set-char-table-default table (car l) 'isearch-printing-char)
240 (setq l (cdr l))))
241 ;; Make function keys, etc, exit the search.
242 (define-key map [t] 'isearch-other-control-char)
243 ;; Control chars, by default, end isearch mode transparently.
244 ;; We need these explicit definitions because, in a dense keymap,
245 ;; the binding for t does not affect characters.
246 ;; We use a dense keymap to save space.
247 (while (< i ?\ )
248 (define-key map (make-string 1 i) 'isearch-other-control-char)
249 (setq i (1+ i)))
251 ;; Single-byte printing chars extend the search string by default.
252 (setq i ?\ )
253 (while (< i 256)
254 (define-key map (vector i) 'isearch-printing-char)
255 (setq i (1+ i)))
257 ;; To handle local bindings with meta char prefix keys, define
258 ;; another full keymap. This must be done for any other prefix
259 ;; keys as well, one full keymap per char of the prefix key. It
260 ;; would be simpler to disable the global keymap, and/or have a
261 ;; default local key binding for any key not otherwise bound.
262 (let ((meta-map (make-sparse-keymap)))
263 (define-key map (char-to-string meta-prefix-char) meta-map)
264 (define-key map [escape] meta-map))
265 (define-key map (vector meta-prefix-char t) 'isearch-other-meta-char)
267 ;; Several non-printing chars change the searching behavior.
268 (define-key map "\C-s" 'isearch-repeat-forward)
269 (define-key map "\C-r" 'isearch-repeat-backward)
270 ;; Define M-C-s and M-C-r like C-s and C-r so that the same key
271 ;; combinations can be used to repeat regexp isearches that can
272 ;; be used to start these searches.
273 (define-key map "\M-\C-s" 'isearch-repeat-forward)
274 (define-key map "\M-\C-r" 'isearch-repeat-backward)
275 (define-key map "\177" 'isearch-delete-char)
276 (define-key map "\C-g" 'isearch-abort)
277 ;; This assumes \e is the meta-prefix-char.
278 (or (= ?\e meta-prefix-char)
279 (error "Inconsistency in isearch.el"))
280 (define-key map "\e\e\e" 'isearch-cancel)
281 (define-key map [escape escape escape] 'isearch-cancel)
283 (define-key map "\C-q" 'isearch-quote-char)
285 (define-key map "\r" 'isearch-exit)
286 (define-key map "\C-j" 'isearch-printing-char)
287 (define-key map "\t" 'isearch-printing-char)
288 (define-key map " " 'isearch-whitespace-chars)
289 (define-key map [?\S-\ ] 'isearch-whitespace-chars)
291 (define-key map "\C-w" 'isearch-yank-word)
292 (define-key map "\C-y" 'isearch-yank-line)
294 ;; Define keys for regexp chars * ? |.
295 ;; Nothing special for + because it matches at least once.
296 (define-key map "*" 'isearch-*-char)
297 (define-key map "?" 'isearch-*-char)
298 (define-key map "|" 'isearch-|-char)
300 ;;; Turned off because I find I expect to get the global definition--rms.
301 ;;; ;; Instead bind C-h to special help command for isearch-mode.
302 ;;; (define-key map "\C-h" 'isearch-mode-help)
304 (define-key map "\M-n" 'isearch-ring-advance)
305 (define-key map "\M-p" 'isearch-ring-retreat)
306 (define-key map "\M-y" 'isearch-yank-kill)
308 (define-key map "\M-\t" 'isearch-complete)
310 ;; Pass frame events transparently so they won't exit the search.
311 ;; In particular, if we have more than one display open, then a
312 ;; switch-frame might be generated by someone typing at another keyboard.
313 (define-key map [switch-frame] nil)
314 (define-key map [delete-frame] nil)
315 (define-key map [iconify-frame] nil)
316 (define-key map [make-frame-visible] nil)
317 ;; For searching multilingual text.
318 (define-key map "\C-\\" 'isearch-toggle-input-method)
319 (define-key map "\C-^" 'isearch-toggle-specified-input-method)
321 ;; People expect to be able to paste with the mouse.
322 (define-key map [mouse-2] #'isearch-mouse-yank)
323 (define-key map [down-mouse-2] nil)
325 (setq isearch-mode-map map)
328 ;; Some bindings you may want to put in your isearch-mode-hook.
329 ;; Suggest some alternates...
330 ;; (define-key isearch-mode-map "\C-t" 'isearch-toggle-case-fold)
331 ;; (define-key isearch-mode-map "\C-t" 'isearch-toggle-regexp)
332 ;; (define-key isearch-mode-map "\C-^" 'isearch-edit-string)
335 (defvar minibuffer-local-isearch-map nil
336 "Keymap for editing isearch strings in the minibuffer.")
338 (or minibuffer-local-isearch-map
339 (let ((map (copy-keymap minibuffer-local-map)))
340 (define-key map "\r" 'isearch-nonincremental-exit-minibuffer)
341 (define-key map "\M-n" 'isearch-ring-advance-edit)
342 (define-key map "\M-p" 'isearch-ring-retreat-edit)
343 (define-key map "\M-\t" 'isearch-complete-edit)
344 (define-key map "\C-s" 'isearch-forward-exit-minibuffer)
345 (define-key map "\C-r" 'isearch-reverse-exit-minibuffer)
346 (setq minibuffer-local-isearch-map map)
349 ;; Internal variables declared globally for byte-compiler.
350 ;; These are all set with setq while isearching
351 ;; and bound locally while editing the search string.
353 (defvar isearch-forward nil) ; Searching in the forward direction.
354 (defvar isearch-regexp nil) ; Searching for a regexp.
355 (defvar isearch-word nil) ; Searching for words.
357 (defvar isearch-cmds nil) ; Stack of search status sets.
358 (defvar isearch-string "") ; The current search string.
359 (defvar isearch-message "") ; text-char-description version of isearch-string
361 (defvar isearch-success t) ; Searching is currently successful.
362 (defvar isearch-invalid-regexp nil) ; Regexp not well formed.
363 (defvar isearch-within-brackets nil) ; Regexp has unclosed [.
364 (defvar isearch-other-end nil) ; Start (end) of match if forward (backward).
365 (defvar isearch-wrapped nil) ; Searching restarted from the top (bottom).
366 (defvar isearch-barrier 0)
367 (defvar isearch-just-started nil)
369 ; case-fold-search while searching.
370 ; either nil, t, or 'yes. 'yes means the same as t except that mixed
371 ; case in the search string is ignored.
372 (defvar isearch-case-fold-search nil)
374 (defvar isearch-adjusted nil)
375 (defvar isearch-slow-terminal-mode nil)
376 ;;; If t, using a small window.
377 (defvar isearch-small-window nil)
378 (defvar isearch-opoint 0)
379 ;;; The window configuration active at the beginning of the search.
380 (defvar isearch-window-configuration nil)
382 ;; Flag to indicate a yank occurred, so don't move the cursor.
383 (defvar isearch-yank-flag nil)
385 ;;; A function to be called after each input character is processed.
386 ;;; (It is not called after characters that exit the search.)
387 ;;; It is only set from an optional argument to `isearch-mode'.
388 (defvar isearch-op-fun nil)
390 ;;; Is isearch-mode in a recursive edit for modal searching.
391 (defvar isearch-recursive-edit nil)
393 ;;; Should isearch be terminated after doing one search?
394 (defvar isearch-nonincremental nil)
396 ;; New value of isearch-forward after isearch-edit-string.
397 (defvar isearch-new-forward nil)
399 ;; Accumulate here the overlays opened during searching.
400 (defvar isearch-opened-overlays nil)
402 ;; The value of input-method-function when isearch is invoked.
403 (defvar isearch-input-method-function nil)
405 ;; A flag to tell if input-method-function is locally bound when
406 ;; isearch is invoked.
407 (defvar isearch-input-method-local-p nil)
409 ;; Minor-mode-alist changes - kind of redundant with the
410 ;; echo area, but if isearching in multiple windows, it can be useful.
412 (or (assq 'isearch-mode minor-mode-alist)
413 (nconc minor-mode-alist
414 (list '(isearch-mode isearch-mode))))
416 (defvar isearch-mode nil) ;; Name of the minor mode, if non-nil.
417 (make-variable-buffer-local 'isearch-mode)
419 (define-key global-map "\C-s" 'isearch-forward)
420 (define-key esc-map "\C-s" 'isearch-forward-regexp)
421 (define-key global-map "\C-r" 'isearch-backward)
422 (define-key esc-map "\C-r" 'isearch-backward-regexp)
424 ;;; Entry points to isearch-mode.
426 (defun isearch-forward (&optional regexp-p no-recursive-edit)
428 Do incremental search forward.
429 With a prefix argument, do an incremental regular expression search instead.
430 \\<isearch-mode-map>
431 As you type characters, they add to the search string and are found.
432 The following non-printing keys are bound in `isearch-mode-map'.
434 Type \\[isearch-delete-char] to cancel characters from end of search string.
435 Type \\[isearch-exit] to exit, leaving point at location found.
436 Type LFD (C-j) to match end of line.
437 Type \\[isearch-repeat-forward] to search again forward,\
438 \\[isearch-repeat-backward] to search again backward.
439 Type \\[isearch-yank-word] to yank word from buffer onto end of search\
440 string and search for it.
441 Type \\[isearch-yank-line] to yank rest of line onto end of search string\
442 and search for it.
443 Type \\[isearch-yank-kill] to yank last killed text onto end of search string\
444 and search for it.
445 Type \\[isearch-quote-char] to quote control character to search for it.
446 \\[isearch-abort] while searching or when search has failed cancels input\
447 back to what has
448 been found successfully.
449 \\[isearch-abort] when search is successful aborts and moves point to\
450 starting point.
452 Also supported is a search ring of the previous 16 search strings.
453 Type \\[isearch-ring-advance] to search for the next item in the search ring.
454 Type \\[isearch-ring-retreat] to search for the previous item in the search\
455 ring.
456 Type \\[isearch-complete] to complete the search string using the search ring.
458 The above keys, bound in `isearch-mode-map', are often controlled by
459 options; do M-x apropos on search-.* to find them.
460 Other control and meta characters terminate the search
461 and are then executed normally (depending on `search-exit-option').
462 Likewise for function keys and mouse button events.
464 If this function is called non-interactively, it does not return to
465 the calling function until the search is done."
467 (interactive "P\np")
468 (isearch-mode t (not (null regexp-p)) nil (not no-recursive-edit)))
470 (defun isearch-forward-regexp (&optional not-regexp no-recursive-edit)
472 Do incremental search forward for regular expression.
473 With a prefix argument, do a regular string search instead.
474 Like ordinary incremental search except that your input
475 is treated as a regexp. See \\[isearch-forward] for more info."
476 (interactive "P\np")
477 (isearch-mode t (null not-regexp) nil (not no-recursive-edit)))
479 (defun isearch-backward (&optional regexp-p no-recursive-edit)
481 Do incremental search backward.
482 With a prefix argument, do a regular expression search instead.
483 See \\[isearch-forward] for more information."
484 (interactive "P\np")
485 (isearch-mode nil (not (null regexp-p)) nil (not no-recursive-edit)))
487 (defun isearch-backward-regexp (&optional not-regexp no-recursive-edit)
489 Do incremental search backward for regular expression.
490 With a prefix argument, do a regular string search instead.
491 Like ordinary incremental search except that your input
492 is treated as a regexp. See \\[isearch-forward] for more info."
493 (interactive "P\np")
494 (isearch-mode nil (null not-regexp) nil (not no-recursive-edit)))
497 (defun isearch-mode-help ()
498 (interactive)
499 (describe-function 'isearch-forward)
500 (isearch-update))
503 ;; isearch-mode only sets up incremental search for the minor mode.
504 ;; All the work is done by the isearch-mode commands.
506 ;; Not used yet:
507 ;;(defvar isearch-commands '(isearch-forward isearch-backward
508 ;; isearch-forward-regexp isearch-backward-regexp)
509 ;; "List of commands for which isearch-mode does not recursive-edit.")
512 (defun isearch-mode (forward &optional regexp op-fun recursive-edit word-p)
513 "Start isearch minor mode. Called by `isearch-forward', etc.
515 \\{isearch-mode-map}"
517 ;; Initialize global vars.
518 (setq isearch-forward forward
519 isearch-regexp regexp
520 isearch-word word-p
521 isearch-op-fun op-fun
522 isearch-case-fold-search case-fold-search
523 isearch-string ""
524 isearch-message ""
525 isearch-cmds nil
526 isearch-success t
527 isearch-wrapped nil
528 isearch-barrier (point)
529 isearch-adjusted nil
530 isearch-yank-flag nil
531 isearch-invalid-regexp nil
532 isearch-within-brackets nil
533 isearch-slow-terminal-mode (and (<= baud-rate search-slow-speed)
534 (> (window-height)
535 (* 4 search-slow-window-lines)))
536 isearch-other-end nil
537 isearch-small-window nil
538 isearch-just-started t
540 isearch-opoint (point)
541 search-ring-yank-pointer nil
542 isearch-opened-overlays nil
543 isearch-input-method-function input-method-function
544 isearch-input-method-local-p (local-variable-p 'input-method-function)
545 regexp-search-ring-yank-pointer nil)
547 ;; We must bypass input method while reading key. When a user type
548 ;; printable character, appropriate input method is turned on in
549 ;; minibuffer to read multibyte charactes.
550 (or isearch-input-method-local-p
551 (make-local-variable 'input-method-function))
552 (setq input-method-function nil)
554 (looking-at "")
555 (setq isearch-window-configuration
556 (if isearch-slow-terminal-mode (current-window-configuration) nil))
558 ;; Maybe make minibuffer frame visible and/or raise it.
559 (let ((frame (window-frame (minibuffer-window))))
560 (if (not (memq (frame-live-p frame) '(nil t)))
561 (progn
562 (make-frame-visible frame)
563 (if minibuffer-auto-raise
564 (raise-frame frame)))))
566 (setq isearch-mode " Isearch") ;; forward? regexp?
567 (force-mode-line-update)
569 (isearch-push-state)
571 (setq overriding-terminal-local-map isearch-mode-map)
572 (isearch-update)
573 (run-hooks 'isearch-mode-hook)
575 (add-hook 'mouse-leave-buffer-hook 'isearch-done)
577 ;; isearch-mode can be made modal (in the sense of not returning to
578 ;; the calling function until searching is completed) by entering
579 ;; a recursive-edit and exiting it when done isearching.
580 (if recursive-edit
581 (let ((isearch-recursive-edit t))
582 (recursive-edit)))
583 isearch-success)
586 ;; Some high level utilities. Others below.
588 (defun isearch-update ()
589 ;; Called after each command to update the display.
590 (if (null unread-command-events)
591 (progn
592 (if (not (input-pending-p))
593 (isearch-message))
594 (if (and isearch-slow-terminal-mode
595 (not (or isearch-small-window
596 (pos-visible-in-window-p))))
597 (let ((found-point (point)))
598 (setq isearch-small-window t)
599 (move-to-window-line 0)
600 (let ((window-min-height 1))
601 (split-window nil (if (< search-slow-window-lines 0)
602 (1+ (- search-slow-window-lines))
603 (- (window-height)
604 (1+ search-slow-window-lines)))))
605 (if (< search-slow-window-lines 0)
606 (progn (vertical-motion (- 1 search-slow-window-lines))
607 (set-window-start (next-window) (point))
608 (set-window-hscroll (next-window)
609 (window-hscroll))
610 (set-window-hscroll (selected-window) 0))
611 (other-window 1))
612 (goto-char found-point)))
613 (if isearch-other-end
614 (if (< isearch-other-end (point)) ; isearch-forward?
615 (isearch-highlight isearch-other-end (point))
616 (isearch-highlight (point) isearch-other-end))
617 (isearch-dehighlight nil))
619 (setq ;; quit-flag nil not for isearch-mode
620 isearch-adjusted nil
621 isearch-yank-flag nil)
622 (isearch-lazy-highlight-new-loop)
623 ;; We must prevent the point moving to the end of composition when a
624 ;; part of the composition has just been searched.
625 (setq disable-point-adjustment t))
627 (defun isearch-done (&optional nopush edit)
628 (let ((command `(isearch-resume ,isearch-string ,isearch-regexp
629 ,isearch-word ,isearch-forward
630 ,isearch-message
631 ,isearch-case-fold-search)))
632 (unless (equal (car command-history) command)
633 (setq command-history (cons command command-history))))
635 (remove-hook 'mouse-leave-buffer-hook 'isearch-done)
636 ;; Called by all commands that terminate isearch-mode.
637 ;; If NOPUSH is non-nil, we don't push the string on the search ring.
638 (setq overriding-terminal-local-map nil)
639 ;; (setq pre-command-hook isearch-old-pre-command-hook) ; for lemacs
640 (isearch-dehighlight t)
641 (isearch-lazy-highlight-cleanup)
642 (let ((found-start (window-start (selected-window)))
643 (found-point (point)))
644 (if isearch-window-configuration
645 (set-window-configuration isearch-window-configuration))
647 (if isearch-small-window
648 (goto-char found-point)
649 ;; Exiting the save-window-excursion clobbers window-start; restore it.
650 (set-window-start (selected-window) found-start t))
652 ;; If there was movement, mark the starting position.
653 ;; Maybe should test difference between and set mark iff > threshold.
654 (if (/= (point) isearch-opoint)
655 (or (and transient-mark-mode mark-active)
656 (progn
657 (push-mark isearch-opoint t)
658 (or executing-kbd-macro (> (minibuffer-depth) 0)
659 (message "Mark saved where search started"))))))
661 (setq isearch-mode nil)
662 (if isearch-input-method-local-p
663 (setq input-method-function isearch-input-method-function)
664 (kill-local-variable 'input-method-function))
666 (force-mode-line-update)
668 ;; If we ended in the middle of some intangible text,
669 ;; move to the further end of that intangible text.
670 (let ((after (if (eobp) nil
671 (get-text-property (point) 'intangible)))
672 (before (if (bobp) nil
673 (get-text-property (1- (point)) 'intangible))))
674 (when (and before after (eq before after))
675 (if isearch-forward
676 (goto-char (next-single-property-change (point) 'intangible))
677 (goto-char (previous-single-property-change (point) 'intangible)))))
679 (if (and (> (length isearch-string) 0) (not nopush))
680 ;; Update the ring data.
681 (isearch-update-ring isearch-string isearch-regexp))
683 (run-hooks 'isearch-mode-end-hook)
684 (and (not edit) isearch-recursive-edit (exit-recursive-edit)))
686 (defun isearch-update-ring (string &optional regexp)
687 "Add STRING to the beginning of the search ring.
688 REGEXP says which ring to use."
689 (if regexp
690 (if (or (null regexp-search-ring)
691 (not (string= string (car regexp-search-ring))))
692 (progn
693 (setq regexp-search-ring
694 (cons string regexp-search-ring))
695 (if (> (length regexp-search-ring) regexp-search-ring-max)
696 (setcdr (nthcdr (1- search-ring-max) regexp-search-ring)
697 nil))))
698 (if (or (null search-ring)
699 (not (string= string (car search-ring))))
700 (progn
701 (setq search-ring (cons string search-ring))
702 (if (> (length search-ring) search-ring-max)
703 (setcdr (nthcdr (1- search-ring-max) search-ring) nil))))))
705 ;;; Switching buffers should first terminate isearch-mode.
706 ;;; ;; For Emacs 19, the frame switch event is handled.
707 ;;; (defun isearch-switch-frame-handler ()
708 ;;; (interactive) ;; Is this necessary?
709 ;;; ;; First terminate isearch-mode.
710 ;;; (isearch-done)
711 ;;; (isearch-clean-overlays)
712 ;;; (handle-switch-frame (car (cdr last-command-char))))
715 ;; Commands active while inside of the isearch minor mode.
717 (defun isearch-exit ()
718 "Exit search normally.
719 However, if this is the first command after starting incremental
720 search and `search-nonincremental-instead' is non-nil, do a
721 nonincremental search instead via `isearch-edit-string'."
722 (interactive)
723 (if (and search-nonincremental-instead
724 (= 0 (length isearch-string)))
725 (let ((isearch-nonincremental t))
726 (isearch-edit-string)))
727 (isearch-done)
728 (isearch-clean-overlays))
731 (defun isearch-edit-string ()
732 "Edit the search string in the minibuffer.
733 The following additional command keys are active while editing.
734 \\<minibuffer-local-isearch-map>
735 \\[exit-minibuffer] to resume incremental searching with the edited string.
736 \\[isearch-nonincremental-exit-minibuffer] to do one nonincremental search.
737 \\[isearch-forward-exit-minibuffer] to resume isearching forward.
738 \\[isearch-reverse-exit-minibuffer] to resume isearching backward.
739 \\[isearch-ring-advance-edit] to replace the search string with the next item in the search ring.
740 \\[isearch-ring-retreat-edit] to replace the search string with the previous item in the search ring.
741 \\[isearch-complete-edit] to complete the search string using the search ring.
742 \\<isearch-mode-map>
743 If first char entered is \\[isearch-yank-word], then do word search instead."
745 ;; This code is very hairy for several reasons, explained in the code.
746 ;; Mainly, isearch-mode must be terminated while editing and then restarted.
747 ;; If there were a way to catch any change of buffer from the minibuffer,
748 ;; this could be simplified greatly.
749 ;; Editing doesn't back up the search point. Should it?
750 (interactive)
751 (condition-case err
752 (progn
753 (let ((isearch-nonincremental isearch-nonincremental)
755 ;; Locally bind all isearch global variables to protect them
756 ;; from recursive isearching.
757 ;; isearch-string -message and -forward are not bound
758 ;; so they may be changed. Instead, save the values.
759 (isearch-new-string isearch-string)
760 (isearch-new-message isearch-message)
761 (isearch-new-forward isearch-forward)
762 (isearch-new-word isearch-word)
764 (isearch-regexp isearch-regexp)
765 (isearch-op-fun isearch-op-fun)
766 (isearch-cmds isearch-cmds)
767 (isearch-success isearch-success)
768 (isearch-wrapped isearch-wrapped)
769 (isearch-barrier isearch-barrier)
770 (isearch-adjusted isearch-adjusted)
771 (isearch-yank-flag isearch-yank-flag)
772 (isearch-invalid-regexp isearch-invalid-regexp)
773 (isearch-within-brackets isearch-within-brackets)
774 ;;; Don't bind this. We want isearch-search, below, to set it.
775 ;;; And the old value won't matter after that.
776 ;;; (isearch-other-end isearch-other-end)
777 ;;; Perhaps some of these other variables should be bound for a
778 ;;; shorter period, ending before the next isearch-search.
779 ;;; But there doesn't seem to be a real bug, so let's not risk it now.
780 (isearch-opoint isearch-opoint)
781 (isearch-slow-terminal-mode isearch-slow-terminal-mode)
782 (isearch-small-window isearch-small-window)
783 (isearch-recursive-edit isearch-recursive-edit)
784 ;; Save current configuration so we can restore it here.
785 (isearch-window-configuration (current-window-configuration))
788 ;; Actually terminate isearching until editing is done.
789 ;; This is so that the user can do anything without failure,
790 ;; like switch buffers and start another isearch, and return.
791 (condition-case err
792 (isearch-done t t)
793 (exit nil)) ; was recursive editing
795 (isearch-message) ;; for read-char
796 (unwind-protect
797 (let* (;; Why does following read-char echo?
798 ;;(echo-keystrokes 0) ;; not needed with above message
799 (e (let ((cursor-in-echo-area t))
800 (read-event)))
801 ;; Binding minibuffer-history-symbol to nil is a work-around
802 ;; for some incompatibility with gmhist.
803 (minibuffer-history-symbol)
804 (message-log-max nil))
805 ;; If the first character the user types when we prompt them
806 ;; for a string is the yank-word character, then go into
807 ;; word-search mode. Otherwise unread that character and
808 ;; read a key the normal way.
809 ;; Word search does not apply (yet) to regexp searches,
810 ;; no check is made here.
811 (message (isearch-message-prefix nil nil t))
812 (if (eq 'isearch-yank-word
813 (lookup-key isearch-mode-map (vector e)))
814 (setq isearch-word t;; so message-prefix is right
815 isearch-new-word t)
816 (cancel-kbd-macro-events)
817 (isearch-unread e))
818 (setq cursor-in-echo-area nil)
819 (setq isearch-new-string
820 (let (junk-ring)
821 (read-from-minibuffer
822 (isearch-message-prefix nil nil isearch-nonincremental)
823 isearch-string
824 minibuffer-local-isearch-map nil
825 'junk-ring))
826 isearch-new-message
827 (mapconcat 'isearch-text-char-description
828 isearch-new-string "")))
829 ;; Always resume isearching by restarting it.
830 (isearch-mode isearch-forward
831 isearch-regexp
832 isearch-op-fun
834 isearch-word)
836 ;; Copy new local values to isearch globals
837 (setq isearch-string isearch-new-string
838 isearch-message isearch-new-message
839 isearch-forward isearch-new-forward
840 isearch-word isearch-new-word))
842 ;; Empty isearch-string means use default.
843 (if (= 0 (length isearch-string))
844 (setq isearch-string (or (car (if isearch-regexp
845 regexp-search-ring
846 search-ring))
847 ""))
848 ;; This used to set the last search string,
849 ;; but I think it is not right to do that here.
850 ;; Only the string actually used should be saved.
853 ;; Push the state as of before this C-s.
854 (isearch-push-state)
856 ;; Reinvoke the pending search.
857 (isearch-search)
858 (isearch-update)
859 (if isearch-nonincremental
860 (progn
861 ;; (sit-for 1) ;; needed if isearch-done does: (message "")
862 (isearch-done))))
864 (quit ; handle abort-recursive-edit
865 (isearch-abort) ;; outside of let to restore outside global values
868 (defun isearch-nonincremental-exit-minibuffer ()
869 (interactive)
870 (setq isearch-nonincremental t)
871 (exit-minibuffer))
873 (defun isearch-forward-exit-minibuffer ()
874 (interactive)
875 (setq isearch-new-forward t)
876 (exit-minibuffer))
878 (defun isearch-reverse-exit-minibuffer ()
879 (interactive)
880 (setq isearch-new-forward nil)
881 (exit-minibuffer))
883 (defun isearch-cancel ()
884 "Terminate the search and go back to the starting point."
885 (interactive)
886 (goto-char isearch-opoint)
887 (isearch-done t)
888 (isearch-clean-overlays)
889 (signal 'quit nil)) ; and pass on quit signal
891 (defun isearch-abort ()
892 "Abort incremental search mode if searching is successful, signaling quit.
893 Otherwise, revert to previous successful search and continue searching.
894 Use `isearch-exit' to quit without signaling."
895 (interactive)
896 ;; (ding) signal instead below, if quitting
897 (discard-input)
898 (if isearch-success
899 ;; If search is successful, move back to starting point
900 ;; and really do quit.
901 (progn (goto-char isearch-opoint)
902 (setq isearch-success nil)
903 (isearch-done t) ; exit isearch
904 (isearch-clean-overlays)
905 (signal 'quit nil)) ; and pass on quit signal
906 ;; If search is failing, or has an incomplete regexp,
907 ;; rub out until it is once more successful.
908 (while (or (not isearch-success) isearch-invalid-regexp)
909 (isearch-pop-state))
910 (isearch-update)))
912 (defun isearch-repeat (direction)
913 ;; Utility for isearch-repeat-forward and -backward.
914 (if (eq isearch-forward (eq direction 'forward))
915 ;; C-s in forward or C-r in reverse.
916 (if (equal isearch-string "")
917 ;; If search string is empty, use last one.
918 (setq isearch-string
919 (or (if isearch-regexp
920 (car regexp-search-ring)
921 (car search-ring))
923 isearch-message
924 (mapconcat 'isearch-text-char-description
925 isearch-string ""))
926 ;; If already have what to search for, repeat it.
927 (or isearch-success
928 (progn
929 (goto-char (if isearch-forward (point-min) (point-max)))
930 (setq isearch-wrapped t))))
931 ;; C-s in reverse or C-r in forward, change direction.
932 (setq isearch-forward (not isearch-forward)))
934 (setq isearch-barrier (point)) ; For subsequent \| if regexp.
936 (if (equal isearch-string "")
937 (setq isearch-success t)
938 (if (and isearch-success (equal (match-end 0) (match-beginning 0))
939 (not isearch-just-started))
940 ;; If repeating a search that found
941 ;; an empty string, ensure we advance.
942 (if (if isearch-forward (eobp) (bobp))
943 ;; If there's nowhere to advance to, fail (and wrap next time).
944 (progn
945 (setq isearch-success nil)
946 (ding))
947 (forward-char (if isearch-forward 1 -1))
948 (isearch-search))
949 (isearch-search)))
951 (isearch-push-state)
952 (isearch-update))
954 (defun isearch-repeat-forward ()
955 "Repeat incremental search forwards."
956 (interactive)
957 (isearch-repeat 'forward))
959 (defun isearch-repeat-backward ()
960 "Repeat incremental search backwards."
961 (interactive)
962 (isearch-repeat 'backward))
964 (defun isearch-toggle-regexp ()
965 "Toggle regexp searching on or off."
966 ;; The status stack is left unchanged.
967 (interactive)
968 (setq isearch-regexp (not isearch-regexp))
969 (if isearch-regexp (setq isearch-word nil))
970 (isearch-update))
972 (defun isearch-toggle-case-fold ()
973 "Toggle case folding in searching on or off."
974 (interactive)
975 (setq isearch-case-fold-search
976 (if isearch-case-fold-search nil 'yes))
977 (let ((message-log-max nil))
978 (message "%s%s [case %ssensitive]"
979 (isearch-message-prefix nil nil isearch-nonincremental)
980 isearch-message
981 (if isearch-case-fold-search "in" "")))
982 (setq isearch-adjusted t)
983 (sit-for 1)
984 (isearch-update))
986 (defun isearch-delete-char ()
987 "Discard last input item and move point back.
988 If no previous match was done, just beep."
989 (interactive)
990 (if (null (cdr isearch-cmds))
991 (ding)
992 (isearch-pop-state))
993 (isearch-update))
996 (defun isearch-yank-string (string)
997 "Pull STRING into search string."
998 ;; Downcase the string if not supposed to case-fold yanked strings.
999 (if (and isearch-case-fold-search
1000 (eq 'not-yanks search-upper-case))
1001 (setq string (downcase string)))
1002 (if isearch-regexp (setq string (regexp-quote string)))
1003 (setq isearch-string (concat isearch-string string)
1004 isearch-message
1005 (concat isearch-message
1006 (mapconcat 'isearch-text-char-description
1007 string ""))
1008 ;; Don't move cursor in reverse search.
1009 isearch-yank-flag t)
1010 (isearch-search-and-update))
1012 (defun isearch-yank-kill ()
1013 "Pull string from kill ring into search string."
1014 (interactive)
1015 (isearch-yank-string (current-kill 0)))
1017 (defun isearch-yank-x-selection ()
1018 "Pull current X selection into search string."
1019 (interactive)
1020 (isearch-yank-string (x-get-selection)))
1022 (defun isearch-mouse-yank (click arg)
1023 "Yank with the mouse in Isearch mode.
1024 For a click in the echo area, invoke `isearch-yank-x-selection'.
1025 Otherwise invoke `mouse-yank-at-click'."
1026 (interactive "e\nP")
1027 (let ((w (posn-window (event-start click))))
1028 (if (and (window-minibuffer-p w)
1029 (not (minibuffer-window-active-p w))) ; in echo area
1030 (isearch-yank-x-selection)
1031 (mouse-yank-at-click click arg))))
1033 (defun isearch-yank-word ()
1034 "Pull next word from buffer into search string."
1035 (interactive)
1036 (isearch-yank-string
1037 (save-excursion
1038 (and (not isearch-forward) isearch-other-end
1039 (goto-char isearch-other-end))
1040 (buffer-substring-no-properties
1041 (point) (progn (forward-word 1) (point))))))
1043 (defun isearch-yank-line ()
1044 "Pull rest of line from buffer into search string."
1045 (interactive)
1046 (isearch-yank-string
1047 (save-excursion
1048 (and (not isearch-forward) isearch-other-end
1049 (goto-char isearch-other-end))
1050 (buffer-substring-no-properties (point) (line-end-position)))))
1053 (defun isearch-search-and-update ()
1054 ;; Do the search and update the display.
1055 (if (and (not isearch-success)
1056 ;; unsuccessful regexp search may become
1057 ;; successful by addition of characters which
1058 ;; make isearch-string valid
1059 (not isearch-regexp))
1061 ;; In reverse search, adding stuff at
1062 ;; the end may cause zero or many more chars to be
1063 ;; matched, in the string following point.
1064 ;; Allow all those possibilities without moving point as
1065 ;; long as the match does not extend past search origin.
1066 (if (and (not isearch-forward) (not isearch-adjusted)
1067 (condition-case ()
1068 (let ((case-fold-search isearch-case-fold-search))
1069 (if (and (eq case-fold-search t) search-upper-case)
1070 (setq case-fold-search
1071 (isearch-no-upper-case-p isearch-string isearch-regexp)))
1072 (looking-at (if isearch-regexp isearch-string
1073 (regexp-quote isearch-string))))
1074 (error nil))
1075 (or isearch-yank-flag
1076 (<= (match-end 0)
1077 (min isearch-opoint isearch-barrier))))
1078 (progn
1079 (setq isearch-success t
1080 isearch-invalid-regexp nil
1081 isearch-within-brackets nil
1082 isearch-other-end (match-end 0))
1083 (if (and (eq isearch-case-fold-search t) search-upper-case)
1084 (setq isearch-case-fold-search
1085 (isearch-no-upper-case-p isearch-string isearch-regexp))))
1086 ;; Not regexp, not reverse, or no match at point.
1087 (if (and isearch-other-end (not isearch-adjusted))
1088 (goto-char (if isearch-forward isearch-other-end
1089 (min isearch-opoint
1090 isearch-barrier
1091 (1+ isearch-other-end)))))
1092 (isearch-search)
1094 (isearch-push-state)
1095 (if isearch-op-fun (funcall isearch-op-fun))
1096 (isearch-update))
1099 ;; *, ?, and | chars can make a regexp more liberal.
1100 ;; They can make a regexp match sooner or make it succeed instead of failing.
1101 ;; So go back to place last successful search started
1102 ;; or to the last ^S/^R (barrier), whichever is nearer.
1103 ;; + needs no special handling because the string must match at least once.
1105 (defun isearch-*-char ()
1106 "Handle * and ? specially in regexps."
1107 (interactive)
1108 (if isearch-regexp
1109 (let ((idx (length isearch-string)))
1110 (while (and (> idx 0)
1111 (eq (aref isearch-string (1- idx)) ?\\))
1112 (setq idx (1- idx)))
1113 (when (= (mod (- (length isearch-string) idx) 2) 0)
1114 (setq isearch-adjusted t)
1115 ;; Get the isearch-other-end from before the last search.
1116 ;; We want to start from there,
1117 ;; so that we don't retreat farther than that.
1118 ;; (car isearch-cmds) is after last search;
1119 ;; (car (cdr isearch-cmds)) is from before it.
1120 (let ((cs (nth 5 (car (cdr isearch-cmds)))))
1121 (setq cs (or cs isearch-barrier))
1122 (goto-char
1123 (if isearch-forward
1124 (max cs isearch-barrier)
1125 (min cs isearch-barrier)))))))
1126 (isearch-process-search-char last-command-char))
1129 (defun isearch-|-char ()
1130 "If in regexp search, jump to the barrier."
1131 (interactive)
1132 (if isearch-regexp
1133 (progn
1134 (setq isearch-adjusted t)
1135 (goto-char isearch-barrier)))
1136 (isearch-process-search-char last-command-char))
1139 (defalias 'isearch-other-control-char 'isearch-other-meta-char)
1141 (defun isearch-other-meta-char ()
1142 "Exit the search normally and reread this key sequence.
1143 But only if `search-exit-option' is non-nil, the default.
1144 If it is the symbol `edit', the search string is edited in the minibuffer
1145 and the meta character is unread so that it applies to editing the string."
1146 (interactive)
1147 (let* ((key (this-command-keys))
1148 (main-event (aref key 0))
1149 (keylist (listify-key-sequence key)))
1150 (cond ((and (= (length key) 1)
1151 (let ((lookup (lookup-key function-key-map key)))
1152 (not (or (null lookup) (integerp lookup)
1153 (keymapp lookup)))))
1154 ;; Handle a function key that translates into something else.
1155 ;; If the key has a global definition too,
1156 ;; exit and unread the key itself, so its global definition runs.
1157 ;; Otherwise, unread the translation,
1158 ;; so that the translated key takes effect within isearch.
1159 (cancel-kbd-macro-events)
1160 (if (lookup-key global-map key)
1161 (progn
1162 (isearch-done)
1163 (apply 'isearch-unread keylist))
1164 (setq keylist
1165 (listify-key-sequence (lookup-key function-key-map key)))
1166 (while keylist
1167 (setq key (car keylist))
1168 ;; If KEY is a printing char, we handle it here
1169 ;; directly to avoid the input method and keyboard
1170 ;; coding system translating it.
1171 (if (and (integerp key)
1172 (>= key ?\ ) (/= key 127) (< key 256))
1173 (progn
1174 (isearch-process-search-char key)
1175 (setq keylist (cdr keylist)))
1176 ;; As the remaining keys in KEYLIST can't be handled
1177 ;; here, we must reread them.
1178 (apply 'isearch-unread keylist)
1179 (setq keylist nil)))))
1181 ;; Handle an undefined shifted control character
1182 ;; by downshifting it if that makes it defined.
1183 ;; (As read-key-sequence would normally do,
1184 ;; if we didn't have a default definition.)
1185 (let ((mods (event-modifiers main-event)))
1186 (and (integerp main-event)
1187 (memq 'shift mods)
1188 (memq 'control mods)
1189 (lookup-key isearch-mode-map
1190 (let ((copy (copy-sequence key)))
1191 (aset copy 0
1192 (- main-event (- ?\C-\S-a ?\C-a)))
1193 copy)
1194 nil)))
1195 (setcar keylist (- main-event (- ?\C-\S-a ?\C-a)))
1196 (cancel-kbd-macro-events)
1197 (apply 'isearch-unread keylist))
1198 ((eq search-exit-option 'edit)
1199 (apply 'isearch-unread keylist)
1200 (isearch-edit-string))
1201 (search-exit-option
1202 (let (window)
1203 (cancel-kbd-macro-events)
1204 (apply 'isearch-unread keylist)
1205 ;; Properly handle scroll-bar and mode-line clicks
1206 ;; for which a dummy prefix event was generated as (aref key 0).
1207 (and (> (length key) 1)
1208 (symbolp (aref key 0))
1209 (listp (aref key 1))
1210 (not (numberp (posn-point (event-start (aref key 1)))))
1211 ;; Convert the event back into its raw form,
1212 ;; with the dummy prefix implicit in the mouse event,
1213 ;; so it will get split up once again.
1214 (progn (setq unread-command-events
1215 (cdr unread-command-events))
1216 (setq main-event (car unread-command-events))
1217 (setcar (cdr (event-start main-event))
1218 (car (nth 1 (event-start main-event))))))
1219 ;; If we got a mouse click, maybe it was read with the buffer
1220 ;; it was clicked on. If so, that buffer, not the current one,
1221 ;; is in isearch mode. So end the search in that buffer.
1222 (if (and (listp main-event)
1223 (setq window (posn-window (event-start main-event)))
1224 (windowp window)
1225 (or (> (minibuffer-depth) 0)
1226 (not (window-minibuffer-p window))))
1227 (save-excursion
1228 (set-buffer (window-buffer window))
1229 (isearch-done)
1230 (isearch-clean-overlays))
1231 (isearch-done)
1232 (isearch-clean-overlays))))
1233 (t;; otherwise nil
1234 (isearch-process-search-string key key)))))
1236 (defun isearch-quote-char ()
1237 "Quote special characters for incremental search."
1238 (interactive)
1239 (let ((char (read-quoted-char (isearch-message t))))
1240 ;; Assume character codes 0200 - 0377 stand for characters in some
1241 ;; single-byte character set, and convert them to Emacs
1242 ;; characters.
1243 (and enable-multibyte-characters
1244 (>= char ?\200)
1245 (<= char ?\377)
1246 (setq char (unibyte-char-to-multibyte char)))
1247 (isearch-process-search-char char)))
1249 (defun isearch-return-char ()
1250 "Convert return into newline for incremental search.
1251 Obsolete."
1252 (interactive)
1253 (isearch-process-search-char ?\n))
1255 (defun isearch-printing-char ()
1256 "Add this ordinary printing character to the search string and search."
1257 (interactive)
1258 (let ((char last-command-char))
1259 (if (= char ?\S-\ )
1260 (setq char ?\ ))
1261 (if (and enable-multibyte-characters
1262 (>= char ?\200)
1263 (<= char ?\377))
1264 (if (keyboard-coding-system)
1265 (isearch-process-search-multibyte-characters char)
1266 (isearch-process-search-char (unibyte-char-to-multibyte char)))
1267 (if current-input-method
1268 (isearch-process-search-multibyte-characters char)
1269 (isearch-process-search-char char)))))
1271 (defun isearch-whitespace-chars ()
1272 "Match all whitespace chars, if in regexp mode.
1273 If you want to search for just a space, type \\[quoted-insert] SPC."
1274 (interactive)
1275 (if isearch-regexp
1276 (if (and search-whitespace-regexp (not isearch-within-brackets)
1277 (not isearch-invalid-regexp))
1278 (isearch-process-search-string search-whitespace-regexp " ")
1279 (isearch-printing-char))
1280 (progn
1281 ;; This way of doing word search doesn't correctly extend current search.
1282 ;; (setq isearch-word t)
1283 ;; (setq isearch-adjusted t)
1284 ;; (goto-char isearch-barrier)
1285 (isearch-printing-char))))
1287 (defun isearch-process-search-char (char)
1288 ;; Append the char to the search string, update the message and re-search.
1289 (isearch-process-search-string
1290 (char-to-string char)
1291 (if (>= char ?\200)
1292 (char-to-string char)
1293 (isearch-text-char-description char))))
1295 (defun isearch-process-search-string (string message)
1296 (setq isearch-string (concat isearch-string string)
1297 isearch-message (concat isearch-message message))
1298 (isearch-search-and-update))
1301 ;; Search Ring
1303 (defun isearch-ring-adjust1 (advance)
1304 ;; Helper for isearch-ring-adjust
1305 (let* ((ring (if isearch-regexp regexp-search-ring search-ring))
1306 (length (length ring))
1307 (yank-pointer-name (if isearch-regexp
1308 'regexp-search-ring-yank-pointer
1309 'search-ring-yank-pointer))
1310 (yank-pointer (eval yank-pointer-name)))
1311 (if (zerop length)
1313 (set yank-pointer-name
1314 (setq yank-pointer
1315 (mod (+ (or yank-pointer 0)
1316 (if advance -1 1))
1317 length)))
1318 (setq isearch-string (nth yank-pointer ring)
1319 isearch-message (mapconcat 'isearch-text-char-description
1320 isearch-string "")))))
1322 (defun isearch-ring-adjust (advance)
1323 ;; Helper for isearch-ring-advance and isearch-ring-retreat
1324 (isearch-ring-adjust1 advance)
1325 (if search-ring-update
1326 (progn
1327 (isearch-search)
1328 (isearch-update))
1329 (isearch-edit-string)
1331 (isearch-push-state))
1333 (defun isearch-ring-advance ()
1334 "Advance to the next search string in the ring."
1335 ;; This could be more general to handle a prefix arg, but who would use it.
1336 (interactive)
1337 (isearch-ring-adjust 'advance))
1339 (defun isearch-ring-retreat ()
1340 "Retreat to the previous search string in the ring."
1341 (interactive)
1342 (isearch-ring-adjust nil))
1344 (defun isearch-ring-advance-edit (n)
1345 "Insert the next element of the search history into the minibuffer.
1346 With prefix arg N, insert the Nth element."
1347 (interactive "p")
1348 (let* ((yank-pointer-name (if isearch-regexp
1349 'regexp-search-ring-yank-pointer
1350 'search-ring-yank-pointer))
1351 (yank-pointer (eval yank-pointer-name))
1352 (ring (if isearch-regexp regexp-search-ring search-ring))
1353 (length (length ring)))
1354 (if (zerop length)
1356 (set yank-pointer-name
1357 (setq yank-pointer
1358 (mod (- (or yank-pointer 0) n)
1359 length)))
1361 (delete-field)
1362 (insert (nth yank-pointer ring))
1363 (goto-char (point-max)))))
1365 (defun isearch-ring-retreat-edit (n)
1366 "Insert the previous element of the search history into the minibuffer.
1367 With prefix arg N, insert the Nth element."
1368 (interactive "p")
1369 (isearch-ring-advance-edit (- n)))
1371 ;;(defun isearch-ring-adjust-edit (advance)
1372 ;; "Use the next or previous search string in the ring while in minibuffer."
1373 ;; (isearch-ring-adjust1 advance)
1374 ;; (erase-buffer)
1375 ;; (insert isearch-string))
1377 ;;(defun isearch-ring-advance-edit ()
1378 ;; (interactive)
1379 ;; (isearch-ring-adjust-edit 'advance))
1381 ;;(defun isearch-ring-retreat-edit ()
1382 ;; "Retreat to the previous search string in the ring while in the minibuffer."
1383 ;; (interactive)
1384 ;; (isearch-ring-adjust-edit nil))
1387 (defun isearch-complete1 ()
1388 ;; Helper for isearch-complete and isearch-complete-edit
1389 ;; Return t if completion OK, nil if no completion exists.
1390 (let* ((ring (if isearch-regexp regexp-search-ring search-ring))
1391 (alist (mapcar (function (lambda (string) (list string))) ring))
1392 (completion-ignore-case case-fold-search)
1393 (completion (try-completion isearch-string alist)))
1394 (cond
1395 ((eq completion t)
1396 ;; isearch-string stays the same
1398 ((or completion ; not nil, must be a string
1399 (= 0 (length isearch-string))) ; shouldn't have to say this
1400 (if (equal completion isearch-string) ;; no extension?
1401 (progn
1402 (if completion-auto-help
1403 (with-output-to-temp-buffer "*Isearch completions*"
1404 (display-completion-list
1405 (all-completions isearch-string alist))))
1407 (and completion
1408 (setq isearch-string completion))))
1410 (message "No completion") ; waits a second if in minibuffer
1411 nil))))
1413 (defun isearch-complete ()
1414 "Complete the search string from the strings on the search ring.
1415 The completed string is then editable in the minibuffer.
1416 If there is no completion possible, say so and continue searching."
1417 (interactive)
1418 (if (isearch-complete1)
1419 (isearch-edit-string)
1420 ;; else
1421 (sit-for 1)
1422 (isearch-update)))
1424 (defun isearch-complete-edit ()
1425 "Same as `isearch-complete' except in the minibuffer."
1426 (interactive)
1427 (setq isearch-string (buffer-string))
1428 (if (isearch-complete1)
1429 (progn
1430 (delete-field)
1431 (insert isearch-string))))
1434 ;; The search status stack (and isearch window-local variables, not used).
1435 ;; Need a structure for this.
1437 (defun isearch-top-state ()
1438 (let ((cmd (car isearch-cmds)))
1439 (setq isearch-string (car cmd)
1440 isearch-message (car (cdr cmd))
1441 isearch-success (nth 3 cmd)
1442 isearch-forward (nth 4 cmd)
1443 isearch-other-end (nth 5 cmd)
1444 isearch-word (nth 6 cmd)
1445 isearch-invalid-regexp (nth 7 cmd)
1446 isearch-wrapped (nth 8 cmd)
1447 isearch-barrier (nth 9 cmd)
1448 isearch-within-brackets (nth 10 cmd)
1449 isearch-case-fold-search (nth 11 cmd))
1450 (goto-char (car (cdr (cdr cmd))))))
1452 (defun isearch-pop-state ()
1453 (setq isearch-cmds (cdr isearch-cmds))
1454 (isearch-top-state)
1457 (defun isearch-push-state ()
1458 (setq isearch-cmds
1459 (cons (list isearch-string isearch-message (point)
1460 isearch-success isearch-forward isearch-other-end
1461 isearch-word
1462 isearch-invalid-regexp isearch-wrapped isearch-barrier
1463 isearch-within-brackets isearch-case-fold-search)
1464 isearch-cmds)))
1467 ;; Message string
1469 (defun isearch-message (&optional c-q-hack ellipsis)
1470 ;; Generate and print the message string.
1471 (let ((cursor-in-echo-area ellipsis)
1472 (m (concat
1473 (isearch-message-prefix c-q-hack ellipsis isearch-nonincremental)
1474 isearch-message
1475 (isearch-message-suffix c-q-hack ellipsis)
1477 (if c-q-hack
1479 (let ((message-log-max nil))
1480 (message "%s" m)))))
1482 (defun isearch-message-prefix (&optional c-q-hack ellipsis nonincremental)
1483 ;; If about to search, and previous search regexp was invalid,
1484 ;; check that it still is. If it is valid now,
1485 ;; let the message we display while searching say that it is valid.
1486 (and isearch-invalid-regexp ellipsis
1487 (condition-case ()
1488 (progn (re-search-forward isearch-string (point) t)
1489 (setq isearch-invalid-regexp nil
1490 isearch-within-brackets nil))
1491 (error nil)))
1492 ;; If currently failing, display no ellipsis.
1493 (or isearch-success (setq ellipsis nil))
1494 (let ((m (concat (if isearch-success "" "failing ")
1495 (if (and isearch-wrapped
1496 (if isearch-forward
1497 (> (point) isearch-opoint)
1498 (< (point) isearch-opoint)))
1499 "over")
1500 (if isearch-wrapped "wrapped ")
1501 (if isearch-word "word " "")
1502 (if isearch-regexp "regexp " "")
1503 (if nonincremental "search" "I-search")
1504 (if isearch-forward "" " backward")
1505 (if current-input-method
1506 (concat " [" current-input-method-title "]: ")
1507 ": ")
1509 (concat (upcase (substring m 0 1)) (substring m 1))))
1512 (defun isearch-message-suffix (&optional c-q-hack ellipsis)
1513 (concat (if c-q-hack "^Q" "")
1514 (if isearch-invalid-regexp
1515 (concat " [" isearch-invalid-regexp "]")
1516 "")))
1519 ;;; Searching
1521 (defun isearch-search ()
1522 ;; Do the search with the current search string.
1523 (isearch-message nil t)
1524 (if (and (eq isearch-case-fold-search t) search-upper-case)
1525 (setq isearch-case-fold-search
1526 (isearch-no-upper-case-p isearch-string isearch-regexp)))
1527 (condition-case lossage
1528 (let ((inhibit-point-motion-hooks search-invisible)
1529 (inhibit-quit nil)
1530 (case-fold-search isearch-case-fold-search)
1531 (retry t))
1532 (if isearch-regexp (setq isearch-invalid-regexp nil))
1533 (setq isearch-within-brackets nil)
1534 (while retry
1535 (setq isearch-success
1536 (funcall
1537 (cond (isearch-word
1538 (if isearch-forward
1539 'word-search-forward 'word-search-backward))
1540 (isearch-regexp
1541 (if isearch-forward
1542 're-search-forward 're-search-backward))
1544 (if isearch-forward 'search-forward 'search-backward)))
1545 isearch-string nil t))
1546 ;; Clear RETRY unless we matched some invisible text
1547 ;; and we aren't supposed to do that.
1548 (if (or (eq search-invisible t)
1549 (not isearch-success)
1550 (bobp) (eobp)
1551 (= (match-beginning 0) (match-end 0))
1552 (not (isearch-range-invisible
1553 (match-beginning 0) (match-end 0))))
1554 (setq retry nil)))
1555 (setq isearch-just-started nil)
1556 (if isearch-success
1557 (setq isearch-other-end
1558 (if isearch-forward (match-beginning 0) (match-end 0)))))
1560 (quit (isearch-unread ?\C-g)
1561 (setq isearch-success nil))
1563 (invalid-regexp
1564 (setq isearch-invalid-regexp (car (cdr lossage)))
1565 (setq isearch-within-brackets (string-match "\\`Unmatched \\["
1566 isearch-invalid-regexp))
1567 (if (string-match
1568 "\\`Premature \\|\\`Unmatched \\|\\`Invalid "
1569 isearch-invalid-regexp)
1570 (setq isearch-invalid-regexp "incomplete input")))
1571 (error
1572 ;; stack overflow in regexp search.
1573 (setq isearch-invalid-regexp (car (cdr lossage)))))
1575 (if isearch-success
1577 ;; Ding if failed this time after succeeding last time.
1578 (and (nth 3 (car isearch-cmds))
1579 (ding))
1580 (goto-char (nth 2 (car isearch-cmds)))))
1583 ;;; Called when opening an overlay, and we are still in isearch.
1584 (defun isearch-open-overlay-temporary (ov)
1585 (if (not (null (overlay-get ov 'isearch-open-invisible-temporary)))
1586 ;; Some modes would want to open the overlays temporary during
1587 ;; isearch in their own way, they should set the
1588 ;; `isearch-open-invisible-temporary' to a function doing this.
1589 (funcall (overlay-get ov 'isearch-open-invisible-temporary) ov nil)
1590 ;; Store the values for the `invisible' and `intangible'
1591 ;; properties, and then set them to nil. This way the text hidden
1592 ;; by this overlay becomes visible.
1594 ;; Do we realy need to set the `intangible' property to t? Can we
1595 ;; have the point inside an overlay with an `intangible' property?
1596 ;; In 19.34 this does not exist so I cannot test it.
1597 (overlay-put ov 'isearch-invisible (overlay-get ov 'invisible))
1598 (overlay-put ov 'isearch-intangible (overlay-get ov 'intangible))
1599 (overlay-put ov 'invisible nil)
1600 (overlay-put ov 'intangible nil)))
1603 ;;; This is called at the end of isearch. It will open the overlays
1604 ;;; that contain the latest match. Obviously in case of a C-g the
1605 ;;; point returns to the original location which surely is not contain
1606 ;;; in any of these overlays, se we are safe in this case too.
1607 (defun isearch-open-necessary-overlays (ov)
1608 (let ((inside-overlay (and (> (point) (overlay-start ov))
1609 (< (point) (overlay-end ov))))
1610 ;; If this exists it means that the overlay was opened using
1611 ;; this function, not by us tweaking the overlay properties.
1612 (fct-temp (overlay-get ov 'isearch-open-invisible-temporary)))
1613 (when (or inside-overlay (not fct-temp))
1614 ;; restore the values for the `invisible' and `intangible'
1615 ;; properties
1616 (overlay-put ov 'invisible (overlay-get ov 'isearch-invisible))
1617 (overlay-put ov 'intangible (overlay-get ov 'isearch-intangible))
1618 (overlay-put ov 'isearch-invisible nil)
1619 (overlay-put ov 'isearch-intangible nil))
1620 (if inside-overlay
1621 (funcall (overlay-get ov 'isearch-open-invisible) ov)
1622 (if fct-temp
1623 (funcall fct-temp ov t)))))
1625 ;;; This is called when exiting isearch. It closes the temporary
1626 ;;; opened overlays, except the ones that contain the latest match.
1627 (defun isearch-clean-overlays ()
1628 (when isearch-opened-overlays
1629 ;; Use a cycle instead of a mapcar here?
1630 (mapcar
1631 (function isearch-open-necessary-overlays) isearch-opened-overlays)
1632 (setq isearch-opened-overlays nil)))
1634 ;;; Verify if the current match is outside of each element of
1635 ;;; `isearch-opened-overlays', if so close that overlay.
1636 (defun isearch-close-unecessary-overlays (begin end)
1637 (let ((ov-list isearch-opened-overlays)
1639 inside-overlay
1640 fct-temp)
1641 (setq isearch-opened-overlays nil)
1642 (while ov-list
1643 (setq ov (car ov-list))
1644 (setq ov-list (cdr ov-list))
1645 (setq inside-overlay (or (and (> begin (overlay-start ov))
1646 (< begin (overlay-end ov)))
1647 (and (> end (overlay-start ov))
1648 (< end (overlay-end ov)))))
1649 ;; If this exists it means that the overlay was opened using
1650 ;; this function, not by us tweaking the overlay properties.
1651 (setq fct-temp (overlay-get ov 'isearch-open-invisible-temporary))
1652 (if inside-overlay
1653 (setq isearch-opened-overlays (cons ov isearch-opened-overlays))
1654 (if fct-temp
1655 (funcall fct-temp ov t)
1656 (overlay-put ov 'invisible (overlay-get ov 'isearch-invisible))
1657 (overlay-put ov 'intangible (overlay-get ov 'isearch-intangible))
1658 (overlay-put ov 'isearch-invisible nil)
1659 (overlay-put ov 'isearch-intangible nil))))))
1661 (defun isearch-range-invisible (beg end)
1662 "Return t if all the text from BEG to END is invisible."
1663 (and (/= beg end)
1664 ;; Check that invisibility runs up to END.
1665 (save-excursion
1666 (goto-char beg)
1667 (let (
1668 ;; can-be-opened keeps track if we can open some overlays.
1669 (can-be-opened (eq search-invisible 'open))
1670 ;; the list of overlays that could be opened
1671 (crt-overlays nil))
1672 (when (and can-be-opened isearch-hide-immediately)
1673 (isearch-close-unecessary-overlays beg end))
1674 ;; If the following character is currently invisible,
1675 ;; skip all characters with that same `invisible' property value.
1676 ;; Do that over and over.
1677 (while (and (< (point) end)
1678 (let ((prop
1679 (get-char-property (point) 'invisible)))
1680 (if (eq buffer-invisibility-spec t)
1681 prop
1682 (or (memq prop buffer-invisibility-spec)
1683 (assq prop buffer-invisibility-spec)))))
1684 (if (get-text-property (point) 'invisible)
1685 (progn
1686 (goto-char (next-single-property-change (point) 'invisible
1687 nil end))
1688 ;; if text is hidden by an `invisible' text property
1689 ;; we cannot open it at all.
1690 (setq can-be-opened nil))
1691 (unless (null can-be-opened)
1692 (let ((overlays (overlays-at (point)))
1693 ov-list
1695 invis-prop)
1696 (while overlays
1697 (setq o (car overlays)
1698 invis-prop (overlay-get o 'invisible))
1699 (if (if (eq buffer-invisibility-spec t)
1700 invis-prop
1701 (or (memq invis-prop buffer-invisibility-spec)
1702 (assq invis-prop buffer-invisibility-spec)))
1703 (if (overlay-get o 'isearch-open-invisible)
1704 (setq ov-list (cons o ov-list))
1705 ;; We found one overlay that cannot be
1706 ;; opened, that means the whole chunk
1707 ;; cannot be opened.
1708 (setq can-be-opened nil)))
1709 (setq overlays (cdr overlays)))
1710 (if can-be-opened
1711 ;; It makes sense to append to the open
1712 ;; overlays list only if we know that this is
1713 ;; t.
1714 (setq crt-overlays (append ov-list crt-overlays)))))
1715 (goto-char (next-overlay-change (point)))))
1716 ;; See if invisibility reaches up thru END.
1717 (if (>= (point) end)
1718 (if (and (not (null can-be-opened)) (consp crt-overlays))
1719 (progn
1720 (setq isearch-opened-overlays
1721 (append isearch-opened-overlays crt-overlays))
1722 ;; maybe use a cycle instead of mapcar?
1723 (mapcar (function isearch-open-overlay-temporary)
1724 crt-overlays)
1725 nil)
1726 t))))))
1729 ;;; Highlighting
1731 (defvar isearch-overlay nil)
1733 (defun isearch-highlight (beg end)
1734 (if (or (null search-highlight) (null (display-color-p)))
1736 (or isearch-overlay (setq isearch-overlay (make-overlay beg end)))
1737 (move-overlay isearch-overlay beg end (current-buffer))
1738 (overlay-put isearch-overlay 'face
1739 (if (facep 'isearch)
1740 'isearch 'region))))
1742 (defun isearch-dehighlight (totally)
1743 (if isearch-overlay
1744 (delete-overlay isearch-overlay)))
1746 ;;; General utilities
1749 (defun isearch-no-upper-case-p (string regexp-flag)
1750 "Return t if there are no upper case chars in STRING.
1751 If REGEXP-FLAG is non-nil, disregard letters preceded by `\\' (but not `\\\\')
1752 since they have special meaning in a regexp."
1753 (let (quote-flag (i 0) (len (length string)) found)
1754 (while (and (not found) (< i len))
1755 (let ((char (aref string i)))
1756 (if (and regexp-flag (eq char ?\\))
1757 (setq quote-flag (not quote-flag))
1758 (if (and (not quote-flag) (not (eq char (downcase char))))
1759 (setq found t))))
1760 (setq i (1+ i)))
1761 (not found)))
1763 ;; Portability functions to support various Emacs versions.
1765 (defun isearch-text-char-description (c)
1766 (if (and (integerp c) (or (< c ?\ ) (= c ?\^?)))
1767 (text-char-description c)
1768 (char-to-string c)))
1770 ;; General function to unread characters or events.
1771 ;; Also insert them in a keyboard macro being defined.
1772 (defun isearch-unread (&rest char-or-events)
1773 (mapcar 'store-kbd-macro-event char-or-events)
1774 (setq unread-command-events
1775 (append char-or-events unread-command-events)))
1778 ;;; isearch-lazy-highlight feature
1779 ;;; by Bob Glickstein <http://www.zanshin.com/~bobg/>
1781 ;;; When active, *every* match for the current search string is
1782 ;;; highlighted: the current one using the normal isearch match color
1783 ;;; and all the others using the unobtrusive `secondary-selection'
1784 ;;; color. The extra highlighting makes it easier to anticipate where
1785 ;;; the cursor will land each time you press C-s or C-r to repeat a
1786 ;;; pending search. Highlighting of these additional matches happens
1787 ;;; in a deferred fashion using "idle timers," so the cycles needed do
1788 ;;; not rob isearch of its usual snappy response.
1790 ;;; IMPLEMENTATION NOTE: This depends on some isearch internals.
1791 ;;; Specifically:
1792 ;;; - `isearch-update' is expected to be called (at least) every time
1793 ;;; the search string changes;
1794 ;;; - `isearch-string' is expected to contain the current search
1795 ;;; string as entered by the user;
1796 ;;; - `isearch-overlay' is expected to contain the overlay used for
1797 ;;; primary isearch match-highlighting;
1798 ;;; - `isearch-opoint' is expected to contain the location where the
1799 ;;; current search began;
1800 ;;; - the type of the current search is expected to be given by
1801 ;;; `isearch-word' and `isearch-regexp';
1802 ;;; - the direction of the current search is expected to be given by
1803 ;;; `isearch-forward';
1804 ;;; - the variable `isearch-invalid-regexp' is expected to be true
1805 ;;; iff `isearch-string' is an invalid regexp.
1807 (require 'timer)
1809 (defgroup isearch-lazy-highlight nil
1810 "Lazy highlighting feature for incremental search."
1811 :prefix "isearch-lazy-highlight-"
1812 :group 'isearch)
1814 (defcustom isearch-lazy-highlight t
1815 "*Controls the lazy-highlighting during incremental searches.
1816 When non-nil, all text in the buffer matching the current search
1817 string is highlighted lazily (see `isearch-lazy-highlight-initial-delay'
1818 and `isearch-lazy-highlight-interval')."
1819 :type 'boolean
1820 :group 'isearch-lazy-highlight)
1822 (defcustom isearch-lazy-highlight-cleanup t
1823 "*Controls whether to remove extra highlighting after a search.
1824 If this is nil, extra highlighting can be \"manually\" removed with
1825 \\[isearch-lazy-highlight-cleanup]."
1826 :type 'boolean
1827 :group 'isearch-lazy-highlight)
1829 (defcustom isearch-lazy-highlight-initial-delay 0.25
1830 "*Seconds to wait before beginning to lazily highlight all matches."
1831 :type 'number
1832 :group 'isearch-lazy-highlight)
1834 (defcustom isearch-lazy-highlight-interval 0.0625
1835 "*Seconds between lazily highlighting successive matches."
1836 :type 'number
1837 :group 'isearch-lazy-highlight)
1839 (defcustom isearch-lazy-highlight-face 'secondary-selection
1840 "*Face to use for lazily highlighting all matches."
1841 :type 'face
1842 :group 'isearch-lazy-highlight)
1844 (defvar isearch-lazy-highlight-overlays nil)
1845 (defvar isearch-lazy-highlight-wrapped nil)
1846 (defvar isearch-lazy-highlight-start nil)
1847 (defvar isearch-lazy-highlight-end nil)
1848 (defvar isearch-lazy-highlight-timer nil)
1849 (defvar isearch-lazy-highlight-last-string nil)
1851 (defun isearch-lazy-highlight-cleanup (&optional force)
1852 "Stop lazy highlighting and remove extra highlighting from current buffer.
1853 FORCE non-nil means do it whether or not `isearch-lazy-highlight-cleanup'
1854 is nil. This function is called when exiting an incremental search if
1855 `isearch-lazy-highlight-cleanup' is non-nil."
1856 (interactive '(t))
1857 (if (or force isearch-lazy-highlight-cleanup)
1858 (isearch-lazy-highlight-remove-overlays))
1859 (if isearch-lazy-highlight-timer
1860 (progn
1861 (cancel-timer isearch-lazy-highlight-timer)
1862 (setq isearch-lazy-highlight-timer nil))))
1864 (defun isearch-lazy-highlight-remove-overlays ()
1865 "Remove lazy highlight overlays from the current buffer."
1866 (while isearch-lazy-highlight-overlays
1867 (delete-overlay (car isearch-lazy-highlight-overlays))
1868 (setq isearch-lazy-highlight-overlays
1869 (cdr isearch-lazy-highlight-overlays))))
1871 (defun isearch-lazy-highlight-new-loop ()
1872 "Cleanup any previous isearch-lazy-highlight loop and begin a new one.
1873 This happens when `isearch-update' is invoked (which can cause the
1874 search string to change)."
1875 (if (and isearch-lazy-highlight
1876 (not (equal isearch-string isearch-lazy-highlight-last-string)))
1877 ;; the search string did indeed change
1878 (progn
1879 (isearch-lazy-highlight-cleanup t) ;kill old loop & remove overlays
1880 (if (and isearch-overlay
1881 (not (overlay-get isearch-overlay 'priority)))
1882 ;; make sure the isearch-overlay takes priority
1883 (overlay-put isearch-overlay 'priority 1))
1884 (setq isearch-lazy-highlight-start isearch-opoint
1885 isearch-lazy-highlight-end isearch-opoint
1886 isearch-lazy-highlight-last-string isearch-string
1887 isearch-lazy-highlight-wrapped nil)
1888 (setq isearch-lazy-highlight-timer
1889 (run-with-idle-timer isearch-lazy-highlight-initial-delay nil
1890 'isearch-lazy-highlight-update)))))
1892 (defun isearch-lazy-highlight-search ()
1893 "Search ahead for the next or previous match, for lazy highlighting.
1894 Attempt to do the search exactly the way the pending isearch would."
1895 (let ((case-fold-search isearch-case-fold-search))
1896 (funcall (cond (isearch-word (if isearch-forward
1897 'word-search-forward
1898 'word-search-backward))
1899 (isearch-regexp (if isearch-forward
1900 're-search-forward
1901 're-search-backward))
1902 (t (if isearch-forward
1903 'search-forward
1904 'search-backward)))
1905 isearch-string
1906 (if isearch-forward
1907 (if isearch-lazy-highlight-wrapped
1908 isearch-lazy-highlight-start
1909 nil)
1910 (if isearch-lazy-highlight-wrapped
1911 isearch-lazy-highlight-end
1912 nil))
1913 t)))
1915 (defun isearch-lazy-highlight-update ()
1916 "Find and highlight the next match in the lazy highlighting loop."
1917 (when (not isearch-invalid-regexp)
1918 (save-excursion
1919 (save-match-data
1920 (goto-char (if isearch-forward
1921 isearch-lazy-highlight-end
1922 isearch-lazy-highlight-start))
1923 (let ((found (isearch-lazy-highlight-search))) ;do search
1924 (if found
1925 ;; found the next match
1926 (let ((ov (make-overlay (match-beginning 0)
1927 (match-end 0))))
1928 (overlay-put ov 'face isearch-lazy-highlight-face)
1929 (overlay-put ov 'priority 0)
1930 (setq isearch-lazy-highlight-overlays
1931 (cons ov isearch-lazy-highlight-overlays))
1932 (setq isearch-lazy-highlight-timer
1933 (run-at-time isearch-lazy-highlight-interval nil
1934 'isearch-lazy-highlight-update))
1935 (if isearch-forward
1936 (setq isearch-lazy-highlight-end (point))
1937 (setq isearch-lazy-highlight-start (point))))
1938 ;; found no next match
1939 (when (not isearch-lazy-highlight-wrapped)
1940 ;; let's try wrapping around the end of the buffer
1941 (setq isearch-lazy-highlight-wrapped t)
1942 (setq isearch-lazy-highlight-timer
1943 (run-at-time isearch-lazy-highlight-interval nil
1944 'isearch-lazy-highlight-update))
1945 (if isearch-forward
1946 (setq isearch-lazy-highlight-end (point-min))
1947 (setq isearch-lazy-highlight-start (point-max))))))))))
1949 (defun isearch-resume (search regexp word forward message case-fold)
1950 "Resume an incremental search.
1951 SEARCH is the string or regexp searched for.
1952 REGEXP non-nil means the resumed search was a regexp search.
1953 WORD non-nil means resume a word search.
1954 FORWARD non-nil means resume a forward search.
1955 MESSAGE is the echo-area message recorded for the search resumed.
1956 CASE-FOLD non-nil means the search was case-insensitive."
1957 (isearch-mode forward regexp nil nil word)
1958 (setq isearch-string search
1959 isearch-message message
1960 isearch-case-fold-search case-fold)
1961 (isearch-search))
1963 ;;; isearch.el ends here