| blob | 27f763ff24bb4fe0fcf116dad24264e2c3d44f51 |
1 @echo off\r
2 rem ----------------------------------------------------------------------\r
3 rem Configuration script for MSDOS\r
4 rem Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2001\r
5 rem Free Software Foundation, Inc.\r
6 \r
7 rem This file is part of GNU Emacs.\r
8 \r
9 rem GNU Emacs is free software; you can redistribute it and/or modify\r
10 rem it under the terms of the GNU General Public License as published by\r
11 rem the Free Software Foundation; either version 2, or (at your option)\r
12 rem any later version.\r
13 \r
14 rem GNU Emacs is distributed in the hope that it will be useful,\r
15 rem but WITHOUT ANY WARRANTY; without even the implied warranty of\r
16 rem MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
17 rem GNU General Public License for more details.\r
18 \r
19 rem You should have received a copy of the GNU General Public License\r
20 rem along with GNU Emacs; see the file COPYING. If not, write to the\r
21 rem Free Software Foundation, Inc., 59 Temple Place - Suite 330,\r
22 rem Boston, MA 02111-1307, USA.\r
23 rem ----------------------------------------------------------------------\r
24 rem YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:\r
25 rem\r
26 rem + msdos version 3 or better.\r
27 rem + djgpp version 1.12maint1 or later (version 2.0 or later recommended).\r
28 rem + make utility that allows breaking of the 128 chars limit on\r
29 rem command lines. ndmake (as of version 4.5) won't work due to a\r
30 rem line length limit. The make that comes with djgpp does work.\r
31 rem + rm and mv (from GNU file utilities).\r
32 rem + sed (you can use the port that comes with DJGPP).\r
33 rem\r
34 rem You should be able to get all the above utilities from any SimTel\r
35 rem repository, e.g. ftp.simtel.net, in the directory\r
36 rem "pub/simtelnet/gnu/djgpp/v2gnu". As usual, please use your local\r
37 rem mirroring site to reduce trans-Atlantic traffic.\r
38 rem ----------------------------------------------------------------------\r
39 set X11=\r
40 set nodebug=\r
41 set djgpp_ver=\r
42 if "%1" == "" goto usage\r
43 rem ----------------------------------------------------------------------\r
44 rem See if their environment is large enough. We need 28 bytes.\r
45 set $foo$=789012345678901234567\r
46 if not "%$foo$%" == "789012345678901234567" goto SmallEnv\r
47 set $foo$=\r
48 :again\r
49 if "%1" == "" goto usage\r
50 if "%1" == "--with-x" goto withx\r
51 if "%1" == "--no-debug" goto nodebug\r
52 if "%1" == "msdos" goto msdos\r
53 :usage\r
54 echo Usage: config [--with-x] [--no-debug] msdos\r
55 echo [Read the script before you run it.]\r
56 goto end\r
57 rem ----------------------------------------------------------------------\r
58 :withx\r
59 set X11=Y\r
60 shift\r
61 goto again\r
62 rem ----------------------------------------------------------------------\r
63 :nodebug\r
64 set nodebug=Y\r
65 shift\r
66 goto again\r
67 rem ----------------------------------------------------------------------\r
68 :msdos\r
69 Echo Checking whether 'sed' is available...\r
70 sed -e "w junk.$$$" <Nul\r
71 If Exist junk.$$$ Goto sedOk\r
72 Echo To configure 'Emacs' you need to have 'sed'!\r
73 Goto End\r
74 :sedOk\r
75 Echo Checking whether 'rm' is available...\r
76 rm -f junk.$$$\r
77 If Not Exist junk.$$$ Goto rmOk\r
78 Echo To configure 'Emacs' you need to have 'rm'!\r
79 Goto End\r
80 :rmOk\r
81 Echo Checking whether 'mv' is available...\r
82 rm -f junk.1 junk.2\r
83 echo foo >junk.1\r
84 mv junk.1 ./junk.2\r
85 If Exist junk.2 Goto mvOk\r
86 Echo To configure 'Emacs' you need to have 'mv'!\r
87 rm -f junk.1\r
88 Goto End\r
89 :mvOk\r
90 rm -f junk.2\r
91 Echo Checking whether 'gcc' is available...\r
92 echo main(){} >junk.c\r
93 gcc -c junk.c\r
94 if exist junk.o goto gccOk\r
95 Echo To configure 'Emacs' you need to have 'gcc'!\r
96 rm -f junk.c\r
97 Goto End\r
98 :gccOk\r
99 rm -f junk.c junk.o junk junk.exe\r
100 Echo Checking what version of DJGPP is installed...\r
101 If Not "%DJGPP%" == "" goto djgppOk\r
102 Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r
103 Goto End\r
104 :djgppOk\r
105 echo int main() >junk.c\r
106 echo #ifdef __DJGPP__ >>junk.c\r
107 echo {return (__DJGPP__)*10;} >>junk.c\r
108 echo #else >>junk.c\r
109 echo #ifdef __GO32__ >>junk.c\r
110 echo {return 10;} >>junk.c\r
111 echo #else >>junk.c\r
112 echo {return 0;} >>junk.c\r
113 echo #endif >>junk.c\r
114 echo #endif >>junk.c\r
115 gcc -o junk junk.c\r
116 if not exist junk.exe coff2exe junk\r
117 junk\r
118 If ErrorLevel 10 Goto go32Ok\r
119 rm -f junk.c junk junk.exe\r
120 Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r
121 Goto End\r
122 :go32Ok\r
123 set djgpp_ver=1\r
124 If ErrorLevel 20 set djgpp_ver=2\r
125 rm -f junk.c junk junk.exe\r
126 rem DJECHO is used by the top-level Makefile\r
127 Echo Checking whether 'djecho' is available...\r
128 redir -o Nul -eo djecho -o junk.$$$ foo\r
129 If Exist junk.$$$ Goto djechoOk\r
130 Echo To build 'Emacs' you need the 'djecho.exe' program!\r
131 Echo 'djecho.exe' is part of 'djdevNNN.zip' basic DJGPP development kit.\r
132 Echo Versions of DJGPP before 2.02 called this program 'echo.exe'.\r
133 Echo Either unpack 'djecho.exe' from the 'djdevNNN.zip' archive,\r
134 Echo or, if you have 'echo.exe', copy it to 'djecho.exe'.\r
135 Echo Then run CONFIG.BAT again with the same arguments you did now.\r
136 Goto End\r
137 :djechoOk\r
138 rm -f junk.$$$\r
139 Echo Configuring for DJGPP Version %DJGPP_VER% ...\r
140 Rem ----------------------------------------------------------------------\r
141 Echo Configuring the source directory...\r
142 cd src\r
143 \r
144 rem Create "epaths.h"\r
145 sed -f ../msdos/sed4.inp <epaths.in >epaths.tmp\r
146 update epaths.tmp epaths.h >nul\r
147 rm -f epaths.tmp\r
148 \r
149 rem Create "config.h"\r
150 rm -f config.h2 config.tmp\r
151 sed -e '' config.in > config.tmp\r
152 if "%X11%" == "" goto src4\r
153 sed -f ../msdos/sed2x.inp <config.in >config.tmp\r
154 :src4\r
155 sed -f ../msdos/sed2.inp <config.tmp >config.h2\r
156 update config.h2 config.h >nul\r
157 rm -f config.tmp config.h2\r
158 \r
159 rem On my system dir.h gets in the way. It's a VMS file so who cares.\r
160 if exist dir.h ren dir.h vmsdir.h\r
161 \r
162 rem Create "makefile" from "makefile.in".\r
163 rm -f Makefile junk.c\r
164 sed -e "1,/== start of cpp stuff ==/s@^# .*$@@" <Makefile.in >junk.c\r
165 If "%DJGPP_VER%" == "1" Goto mfV1\r
166 gcc -E -traditional junk.c | sed -f ../msdos/sed1v2.inp >Makefile\r
167 goto mfDone\r
168 :mfV1\r
169 gcc -E -traditional junk.c | sed -f ../msdos/sed1.inp >Makefile\r
170 :mfDone\r
171 rm -f junk.c\r
172 \r
173 if "%X11%" == "" goto src5\r
174 mv Makefile makefile.tmp\r
175 sed -f ../msdos/sed1x.inp <makefile.tmp >Makefile\r
176 rm -f makefile.tmp\r
177 :src5\r
178 \r
179 if "%nodebug%" == "" goto src6\r
180 sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
181 sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile\r
182 rm -f makefile.tmp\r
183 :src6\r
184 cd ..\r
185 rem ----------------------------------------------------------------------\r
186 Echo Configuring the library source directory...\r
187 cd lib-src\r
188 rem Create "makefile" from "makefile.in".\r
189 sed -e "1,/== start of cpp stuff ==/s@^# .*$@@" <Makefile.in >junk.c\r
190 gcc -E -traditional -I. -I../src junk.c | sed -e "s/^ / /" -e "/^#/d" -e "/^[ \f]*$/d" >makefile.new\r
191 If "%DJGPP_VER%" == "2" goto libsrc-v2\r
192 sed -f ../msdos/sed3.inp <makefile.new >Makefile\r
193 Goto libsrc2\r
194 :libsrc-v2\r
195 sed -f ../msdos/sed3v2.inp <makefile.new >Makefile\r
196 :libsrc2\r
197 rm -f makefile.new junk.c\r
198 if "%nodebug%" == "" goto libsrc3\r
199 sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
200 sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile\r
201 rm -f makefile.tmp\r
202 :libsrc3\r
203 cd ..\r
204 rem ----------------------------------------------------------------------\r
205 if "%X11%" == "" goto oldx1\r
206 Echo Configuring the oldxmenu directory...\r
207 cd oldxmenu\r
208 sed -f ../msdos/sed5x.inp <Makefile.in >Makefile\r
209 if "%nodebug%" == "" goto oldx2\r
210 sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
211 mv -f makefile.tmp Makefile\r
212 :oldx2\r
213 cd ..\r
214 :oldx1\r
215 rem ----------------------------------------------------------------------\r
216 Echo Configuring the manual directory...\r
217 cd man\r
218 sed -f ../msdos/sed6.inp < Makefile.in > Makefile\r
219 cd ..\r
220 rem ----------------------------------------------------------------------\r
221 Echo Configuring the ELisp manual directory...\r
222 cd lispref\r
223 sed -f ../msdos/sed6.inp < Makefile.in > Makefile\r
224 cd ..\r
225 rem ----------------------------------------------------------------------\r
226 Echo Configuring the ELisp Introduction manual directory...\r
227 cd lispintro\r
228 sed -f ../msdos/sed6.inp < Makefile.in > Makefile\r
229 cd ..\r
230 rem ----------------------------------------------------------------------\r
231 Echo Configuring the lisp directory...\r
232 cd lisp\r
233 sed -f ../msdos/sedlisp.inp < Makefile.in > Makefile\r
234 cd ..\r
235 rem ----------------------------------------------------------------------\r
236 If not Exist leim\quail\latin-pre.el goto maindir\r
237 Echo Configuring the leim directory...\r
238 cd leim\r
239 sed -f ../msdos/sedleim.inp < Makefile.in > Makefile\r
240 cd ..\r
241 rem ----------------------------------------------------------------------\r
242 :maindir\r
243 Echo Configuring the main directory...\r
244 If "%DJGPP_VER%" == "1" goto mainv1\r
245 Echo Looking for the GDB init file...\r
246 If Exist src\.gdbinit update src/.gdbinit src/_gdbinit\r
247 If Exist src\_gdbinit goto gdbinitOk\r
248 Echo ERROR:\r
249 Echo I cannot find the GDB init file. It was called ".gdbinit" in\r
250 Echo the Emacs distribution, but was probably renamed to some other\r
251 Echo name without the leading dot when you untarred the archive.\r
252 Echo It should be in the "src/" subdirectory. Please make sure this\r
253 Echo file exists and is called "_gdbinit" with a leading underscore.\r
254 Echo Then run CONFIG.BAT again with the same arguments you did now.\r
255 goto End\r
256 :gdbinitOk\r
257 Echo Looking for the GDB init file...found\r
258 copy msdos\mainmake.v2 Makefile >nul\r
259 :mainv1\r
260 If "%DJGPP_VER%" == "1" copy msdos\mainmake Makefile >nul\r
261 rem ----------------------------------------------------------------------\r
262 goto End\r
263 :SmallEnv\r
264 echo Your environment size is too small. Please enlarge it and run me again.\r
265 echo For example, type "command.com /e:2048" to have 2048 bytes available.\r
266 set $foo$=\r
267 :end\r
268 set X11=\r
269 set nodebug=\r
270 set djgpp_ver=\r