*** empty log message ***
[emacs.git] / Makefile.in
blobd46b0a9f6cc5a9af5354d913eaa16bb22843e312
1 # DIST: This is the distribution Makefile for Emacs. configure can
2 # DIST: make most of the changes to this file you might want, so try
3 # DIST: that first.
5 # make all to compile and build Emacs.
6 # make install to install it.
7 # make TAGS to update tags tables.
9 # make clean or make mostlyclean
10 # Delete all files from the current directory that are normally
11 # created by building the program. Don't delete the files that
12 # record the configuration. Also preserve files that could be made
13 # by building, but normally aren't because the distribution comes
14 # with them.
16 # Delete `.dvi' files here if they are not part of the distribution.
18 # make distclean
19 # Delete all files from the current directory that are created by
20 # configuring or building the program. If you have unpacked the
21 # source and built the program without creating any other files,
22 # `make distclean' should leave only the files that were in the
23 # distribution.
25 # make maintainer-clean
26 # Delete everything from the current directory that can be
27 # reconstructed with this Makefile. This typically includes
28 # everything deleted by distclean, plus more: C source files
29 # produced by Bison, tags tables, info files, and so on.
31 # make extraclean
32 # Still more severe - delete backup and autosave files, too.
34 SHELL = /bin/sh
36 # If Make doesn't predefine MAKE, set it here.
37 @SET_MAKE@
39 # ==================== Things `configure' Might Edit ====================
41 CC=@CC@
42 CPP=@CPP@
43 C_SWITCH_SYSTEM=@c_switch_system@
44 ALLOCA=@ALLOCA@
45 LN_S=@LN_S@
46 CFLAGS=@CFLAGS@
47 LDFLAGS=@LDFLAGS@
48 CPPFLAGS=@CPPFLAGS@
49 C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
50 LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
51 YACC=@YACC@
53 ### These help us choose version- and architecture-specific directories
54 ### to install files in.
56 ### This should be the number of the Emacs version we're building,
57 ### like `18.59' or `19.0'.
58 version=@version@
60 ### This should be the name of the configuration we're building Emacs
61 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
62 configuration=@configuration@
64 # ==================== Where To Install Things ====================
66 # The default location for installation. Everything is placed in
67 # subdirectories of this directory. The default values for many of
68 # the variables below are expressed in terms of this one, so you may
69 # not need to change them. This defaults to /usr/local.
70 prefix=@prefix@
72 # Like `prefix', but used for architecture-specific files.
73 exec_prefix=@exec_prefix@
75 # Where to install Emacs and other binaries that people will want to
76 # run directly (like etags).
77 bindir=@bindir@
79 # Where to install architecture-independent data files. ${lispdir}
80 # and ${etcdir} are subdirectories of this.
81 datadir=@datadir@
83 # Where to install and expect the files that Emacs modifies as it
84 # runs. These files are all architecture-independent.
85 # Right now, this is not used.
86 sharedstatedir=@sharedstatedir@
88 # Where to install and expect executable files to be run by Emacs
89 # rather than directly by users, and other architecture-dependent
90 # data. ${archlibdir} is a subdirectory of this.
91 libexecdir=@libexecdir@
93 # Where to install Emacs's man pages, and what extension they should have.
94 mandir=@mandir@
95 manext=.1
96 man1dir=$(mandir)/man1
98 # Where to install and expect the info files describing Emacs. In the
99 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
100 # since there are now many packages documented with the texinfo
101 # system, it is inappropriate to imply that it is part of Emacs.
102 infodir=@infodir@
104 # Where to look for bitmap files.
105 bitmapdir=@bitmapdir@
107 # Where to find the source code. The source code for Emacs's C kernel is
108 # expected to be in ${srcdir}/src, and the source code for Emacs's
109 # utility programs is expected to be in ${srcdir}/lib-src. This is
110 # set by the configure script's `--srcdir' option.
112 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
113 srcdir=@srcdir@
115 # Tell make where to find source files; this is needed for the makefiles.
116 VPATH=@srcdir@
118 # Where to find the application default.
119 x_default_search_path=@x_default_search_path@
121 # ==================== Emacs-specific directories ====================
123 # These variables hold the values Emacs will actually use. They are
124 # based on the values of the standard Make variables above.
126 # Where to install the lisp files distributed with
127 # Emacs. This includes the Emacs version, so that the
128 # lisp files for different versions of Emacs will install
129 # themselves in separate directories.
130 lispdir=@lispdir@
132 # Directories Emacs should search for lisp files specific
133 # to this site (i.e. customizations), before consulting
134 # ${lispdir}. This should be a colon-separated list of
135 # directories.
136 locallisppath=@locallisppath@
138 # Where Emacs will search to find its lisp files. Before
139 # changing this, check to see if your purpose wouldn't
140 # better be served by changing locallisppath. This
141 # should be a colon-separated list of directories.
142 lisppath=@lisppath@
144 # Where Emacs will search for its lisp files while
145 # building. This is only used during the process of
146 # compiling Emacs, to help Emacs find its lisp files
147 # before they've been installed in their final location.
148 # It's usually identical to lisppath, except that
149 # it does not include locallisppath, and the
150 # entry for the directory containing the installed lisp
151 # files has been replaced with ../lisp. This should be a
152 # colon-separated list of directories.
153 buildlisppath=${srcdir}/lisp
155 # Where to install the other architecture-independent
156 # data files distributed with Emacs (like the tutorial,
157 # the cookie recipes and the Zippy database). This path
158 # usually contains the Emacs version number, so the data
159 # files for multiple versions of Emacs may be installed
160 # at once.
161 etcdir=@etcdir@
163 # Where to put executables to be run by Emacs rather than
164 # the user. This path usually includes the Emacs version
165 # and configuration name, so that multiple configurations
166 # for multiple versions of Emacs may be installed at
167 # once.
168 archlibdir=@archlibdir@
170 # Where to put the docstring file.
171 docdir=@docdir@
173 # ==================== Utility Programs for the Build ====================
175 # Allow the user to specify the install program.
176 INSTALL = @INSTALL@
177 INSTALL_PROGRAM = @INSTALL_PROGRAM@
178 INSTALL_DATA = @INSTALL_DATA@
179 INSTALL_INFO = install-info
180 # By default, we uphold the dignity of our programs.
181 INSTALL_STRIP =
183 # ============================= Targets ==============================
185 # What emacs should be called when installed.
186 EMACS = emacs
188 # Subdirectories to make recursively. `lisp' is not included
189 # because the compiled lisp files are part of the distribution
190 # and you cannot remake them without installing Emacs first.
191 SUBDIR = lib-src src leim
193 # The makefiles of the directories in $SUBDIR.
194 SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile
196 # Subdirectories to install, and where they'll go.
197 # lib-src's makefile knows how to install it, so we don't do that here.
198 # leim's makefile also knows how to install it, so we don't do that here.
199 # When installing the info files, we need to do special things to
200 # avoid nuking an existing dir file, so we don't do that here;
201 # instead, we have written out explicit code in the `install' targets.
202 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
203 COPYDESTS = ${etcdir} ${lispdir}
205 all: ${SUBDIR}
207 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
209 # Generate epaths.h from epaths.in. This target is invoked by `configure'.
210 epaths-force: FRC
211 @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
212 buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
213 x_default_search_path=`echo ${x_default_search_path}`; \
214 sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
215 -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
216 -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
217 -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
218 -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
219 -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
220 -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
221 -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
222 -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \
223 ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
225 # For parallel make, src should be build before leim.
226 leim: src
228 src: lib-src FRC
230 lib-src: FRC src/config.stamp
232 .RECURSIVE: ${SUBDIR}
234 ${SUBDIR}: ${SUBDIR_MAKEFILES} FRC
235 cd $@; $(MAKE) all $(MFLAGS) \
236 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
237 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
239 blessmail: ${SUBDIR_MAKEFILES} src FRC
240 cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
241 MAKE='${MAKE}' archlibdir='$(archlibdir)'
243 Makefile: $(srcdir)/Makefile.in config.status
244 ./config.status
246 config.status: ${srcdir}/configure
247 ./config.status --recheck
249 ${srcdir}/configure: configure.in aclocal.m4
250 cd ${srcdir} && autoconf
252 src/Makefile: $(srcdir)/src/Makefile.in config.status
253 ./config.status
255 src/config.stamp: $(srcdir)/src/config.in config.status
256 ./config.status
257 touch src/config.stamp
259 lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status
260 ./config.status
262 man/Makefile: $(srcdir)/man/Makefile.in config.status
263 ./config.status
265 oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status
266 ./config.status
268 lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status
269 ./config.status
271 leim/Makefile: $(srcdir)/leim/Makefile.in config.status
272 ./config.status
274 # ==================== Installation ====================
276 ## If we let lib-src do its own installation, that means we
277 ## don't have to duplicate the list of utilities to install in
278 ## this Makefile as well.
280 ## On AIX, use tar xBf.
281 ## On Xenix, use tar xpf.
283 .PHONY: install mkdir
285 ## We delete each directory in ${COPYDESTS} before we copy into it;
286 ## that way, we can reinstall over directories that have been put in
287 ## place with their files read-only (perhaps because they are checked
288 ## into RCS). In order to make this safe, we make sure that the
289 ## source exists and is distinct from the destination.
290 ### We do install-arch-indep first because
291 ### the executable needs the Lisp files and DOC file to work properly.
292 install: all install-arch-indep install-arch-dep install-leim blessmail
293 @true
295 ### Install the executables that were compiled specifically for this machine.
296 ### It would be nice to do something for a parallel make
297 ### to ensure that install-arch-indep finishes before this starts.
298 install-arch-dep: mkdir
299 (cd lib-src; \
300 $(MAKE) install $(MFLAGS) prefix=${prefix} \
301 exec_prefix=${exec_prefix} bindir=${bindir} \
302 libexecdir=${libexecdir} archlibdir=${archlibdir} \
303 INSTALL_STRIP=${INSTALL_STRIP})
304 ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs ${bindir}/emacs-${version}
305 -chmod 1755 ${bindir}/emacs-${version}
306 rm -f ${bindir}/$(EMACS)
307 -ln ${bindir}/emacs-${version} ${bindir}/$(EMACS)
308 -unset CDPATH; \
309 for f in `cd lib-src && echo fns-*.el`; do \
310 if test -r lib-src/$$f ; then \
311 ${INSTALL_DATA} lib-src/$$f ${archlibdir}/$$f; \
312 else true; fi ; \
313 done
315 ### Install the files that are machine-independent.
316 ### Most of them come straight from the distribution;
317 ### the exception is the DOC-* files, which are copied
318 ## from the build directory.
320 ## Note that we copy DOC* and then delete DOC
321 ## as a workaround for a bug in tar on Ultrix 4.2.
322 install-arch-indep: mkdir info
323 -set ${COPYDESTS} ; \
324 unset CDPATH; \
325 for dir in ${COPYDIR} ; do \
326 if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
327 rm -rf $$1 ; \
328 fi ; \
329 shift ; \
330 done
331 -set ${COPYDESTS} ; \
332 mkdir ${COPYDESTS} ; \
333 chmod ugo+rx ${COPYDESTS} ; \
334 unset CDPATH; \
335 for dir in ${COPYDIR} ; do \
336 dest=$$1 ; shift ; \
337 [ -d $${dir} ] \
338 && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
339 && (echo "Copying $${dir} to $${dest}..." ; \
340 (cd $${dir}; tar -cf - . ) \
341 |(cd $${dest};umask 022; tar -xvf - && cat > /dev/null); \
342 for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \
343 chmod a+rx $${subdir} ; \
344 rm -rf $${subdir}/RCS ; \
345 rm -rf $${subdir}/CVS ; \
346 rm -f $${subdir}/\#* ; \
347 rm -f $${subdir}/.\#* ; \
348 rm -f $${subdir}/*~ ; \
349 rm -f $${subdir}/*.orig ; \
350 rm -f $${subdir}/[mM]akefile* ; \
351 rm -f $${subdir}/ChangeLog* ; \
352 rm -f $${subdir}/dired.todo ; \
353 done) ; \
354 done
355 -rm -f ${lispdir}/subdirs.el
356 $(srcdir)/update-subdirs ${lispdir}
357 if [ -f ${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
358 then true; \
359 else \
360 (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
361 echo " (normal-top-level-add-subdirs-to-load-path))") \
362 > ${datadir}/emacs/${version}/site-lisp/subdirs.el; \
364 chmod a+r ${datadir}/emacs/${version}/site-lisp/subdirs.el
365 -if [ -f ${datadir}/emacs/site-lisp/subdirs.el ]; \
366 then true; \
367 else \
368 (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
369 echo " (normal-top-level-add-subdirs-to-load-path))") \
370 > ${datadir}/emacs/site-lisp/subdirs.el; \
372 -chmod a+r ${datadir}/emacs/site-lisp/subdirs.el
373 -unset CDPATH; \
374 if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
375 then \
376 echo "Copying etc/DOC-* to ${docdir} ..." ; \
377 (cd ./etc; tar -cf - DOC*) \
378 |(cd ${docdir}; umask 0; tar -xvf - && cat > /dev/null); \
379 (cd $(docdir); chmod a+r DOC*; rm DOC); \
380 else true; fi
381 -unset CDPATH; \
382 if [ -r ./lisp ] \
383 && [ -r ./lisp/simple.el ] \
384 && [ x`(cd ./lisp; /bin/pwd)` != x`(cd ${lispdir}; /bin/pwd)` ] \
385 && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
386 then \
387 echo "Copying lisp/*.el and lisp/*.elc to ${lispdir} ..." ; \
388 (cd lisp; tar -cf - *.el *.elc) \
389 |(cd ${lispdir}; umask 0; tar -xvf - && cat > /dev/null); \
390 else true; fi
391 -unset CDPATH; \
392 thisdir=`/bin/pwd`; \
393 if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
394 then \
395 (cd ${infodir}; \
396 if [ -f dir ]; then true; \
397 else \
398 (cd $${thisdir}; \
399 ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir; \
400 chmod a+r ${infodir}/dir); \
401 fi; \
402 cd ${srcdir}/info ; \
403 for f in ada-mode* autotype* ccmode* cl* dired-x* ebrowse* ediff* efaq* emacs* eudc* forms* gnus* idlwave* info* message* mh-e* reftex* sc* vip* widget* pcl-cvs; do \
404 (cd $${thisdir}; \
405 ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f; \
406 chmod a+r ${infodir}/$$f); \
407 done); \
408 else true; fi
409 -unset CDPATH; \
410 thisdir=`/bin/pwd`; \
411 if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
412 then \
413 for f in ada-mode autotype ccmode cl dired-x ediff efaq emacs eudc forms gnus idlwave info message mh-e reftex sc vip viper widget pcl-cvs; do \
414 (cd $${thisdir}; \
415 ${INSTALL_INFO} --dir-file=${infodir}/dir --info-file=${infodir}/$$f); \
416 done; \
417 else true; fi
418 -chmod -R a+r ${datadir}/emacs ${COPYDESTS} ${infodir}
419 thisdir=`/bin/pwd`; \
420 cd ${srcdir}/etc; \
421 for page in emacs etags ctags ; do \
422 (cd $${thisdir}; \
423 ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${man1dir}/$${page}${manext}; \
424 chmod a+r ${man1dir}/$${page}${manext}); \
425 done
427 ### Install LEIM files. Although they are machine-independent, we
428 ### have separate target here instead of including it in
429 ### `install-arch-indep'. People who extracted LEIM files after they
430 ### insalled Emacs itself can install only LEIM files by this target.
431 install-leim: leim/Makefile mkdir
432 cd leim; $(MAKE) install
434 ### Build Emacs and install it, stripping binaries while installing them.
435 install-strip:
436 $(MAKE) INSTALL_STRIP=-s install
438 ### Build all the directories we're going to install Emacs in. Since
439 ### we may be creating several layers of directories (for example,
440 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
441 ### instead of mkdir. Not all systems' mkdir programs have the `-p' flag.
442 mkdir: FRC
443 if [ -d ${datadir} ]; then true; else \
444 $(srcdir)/mkinstalldirs ${datadir}; \
445 chmod a+r ${datadir};\
447 $(srcdir)/mkinstalldirs ${COPYDESTS} ${infodir} ${man1dir} \
448 ${bindir} ${docdir} ${libexecdir} \
449 ${datadir}/emacs/site-lisp \
450 ${datadir}/emacs/${version}/site-lisp \
451 `echo ${locallisppath} | sed 's/:/ /g'`
453 ### Delete all the installed files that the `install' target would
454 ### create (but not the noninstalled files such as `make all' would
455 ### create).
457 ### Don't delete the lisp and etc directories if they're in the source tree.
458 uninstall:
459 (cd lib-src; \
460 $(MAKE) $(MFLAGS) uninstall \
461 prefix=${prefix} exec_prefix=${exec_prefix} \
462 bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
463 -unset CDPATH; \
464 for dir in ${lispdir} ${etcdir} ; do \
465 if [ -d $${dir} ]; then \
466 case `(cd $${dir} ; /bin/pwd)` in \
467 `(cd ${srcdir} ; /bin/pwd)`* ) ;; \
468 * ) rm -rf $${dir} ;; \
469 esac ; \
470 case $${dir} in \
471 ${datadir}/emacs/${version}/* ) \
472 rm -rf ${datadir}/emacs/${version} \
473 ;; \
474 esac ; \
475 fi ; \
476 done
477 (cd ${infodir} && rm -f cl* dired-x* ediff* emacs* forms* gnus* info* mh-e* sc* vip*)
478 (cd ${man1dir} && rm -f emacs.1 etags.1 ctags.1)
479 (cd ${bindir} && rm -f emacs-${version} $(EMACS))
482 FRC:
484 # ==================== Cleaning up and miscellanea ====================
486 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
488 ### `mostlyclean'
489 ### Like `clean', but may refrain from deleting a few files that people
490 ### normally don't want to recompile. For example, the `mostlyclean'
491 ### target for GCC does not delete `libgcc.a', because recompiling it
492 ### is rarely necessary and takes a lot of time.
493 mostlyclean: FRC
494 (cd src; $(MAKE) $(MFLAGS) mostlyclean)
495 (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
496 (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
497 (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
498 -(cd man && $(MAKE) $(MFLAGS) mostlyclean)
499 (cd leim; $(MAKE) $(MFLAGS) mostlyclean)
501 ### `clean'
502 ### Delete all files from the current directory that are normally
503 ### created by building the program. Don't delete the files that
504 ### record the configuration. Also preserve files that could be made
505 ### by building, but normally aren't because the distribution comes
506 ### with them.
507 ###
508 ### Delete `.dvi' files here if they are not part of the distribution.
509 clean: FRC
510 (cd src; $(MAKE) $(MFLAGS) clean)
511 (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
512 (cd lwlib; $(MAKE) $(MFLAGS) clean)
513 (cd lib-src; $(MAKE) $(MFLAGS) clean)
514 -(cd man && $(MAKE) $(MFLAGS) clean)
515 (cd leim; $(MAKE) $(MFLAGS) clean)
517 ### `distclean'
518 ### Delete all files from the current directory that are created by
519 ### configuring or building the program. If you have unpacked the
520 ### source and built the program without creating any other files,
521 ### `make distclean' should leave only the files that were in the
522 ### distribution.
523 top_distclean=\
524 rm -f config.status config.cache config.log ; \
525 rm -f Makefile ${SUBDIR_MAKEFILES} ; \
526 if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi
527 distclean: FRC
528 (cd src; $(MAKE) $(MFLAGS) distclean)
529 (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
530 (cd lwlib; $(MAKE) $(MFLAGS) distclean)
531 (cd lib-src; $(MAKE) $(MFLAGS) distclean)
532 (cd man && $(MAKE) $(MFLAGS) distclean)
533 (cd leim; $(MAKE) $(MFLAGS) distclean)
534 (cd lisp; $(MAKE) $(MFLAGS) distclean)
535 ${top_distclean}
537 ### `maintainer-clean'
538 ### Delete everything from the current directory that can be
539 ### reconstructed with this Makefile. This typically includes
540 ### everything deleted by distclean, plus more: C source files
541 ### produced by Bison, tags tables, info files, and so on.
542 ###
543 ### One exception, however: `make maintainer-clean' should not delete
544 ### `configure' even if `configure' can be remade using a rule in the
545 ### Makefile. More generally, `make maintainer-clean' should not delete
546 ### anything that needs to exist in order to run `configure' and then
547 ### begin to build the program.
548 maintainer-clean: FRC
549 (cd src; $(MAKE) $(MFLAGS) maintainer-clean)
550 (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
551 (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
552 (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
553 -(cd man && $(MAKE) $(MFLAGS) maintainer-clean)
554 (cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
555 ${top_distclean}
557 ### This doesn't actually appear in the coding standards, but Karl
558 ### says GCC supports it, and that's where the configuration part of
559 ### the coding standards seem to come from. It's like distclean, but
560 ### it deletes backup and autosave files too.
561 extraclean:
562 for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
563 ${top_distclean}
564 -rm config-tmp-*
565 -rm -f *~ \#*
567 ### Unlocking and relocking. The idea of these productions is to reduce
568 ### hassles when installing an incremental tar of Emacs. Do `make unlock'
569 ### before unlocking the file to take the write locks off all sources so
570 ### that tar xvof will overwrite them without fuss. Then do `make relock'
571 ### afterward so that VC mode will know which files should be checked in
572 ### if you want to mung them.
574 ### Note: it's no disaster if these productions miss a file or two; tar
575 ### and VC will swiftly let you know if this happens, and it is easily
576 ### corrected.
577 SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in \
578 README configure make-dist move-if-change
580 .PHONY: unlock relock
582 unlock:
583 chmod u+w $(SOURCES)
584 -(cd elisp; chmod u+w Makefile README *.texi)
585 (cd etc; $(MAKE) $(MFLAGS) unlock)
586 (cd lib-src; $(MAKE) $(MFLAGS) unlock)
587 (cd lisp; $(MAKE) $(MFLAGS) unlock)
588 (cd lisp/term; chmod u+w README *.el)
589 (cd man; chmod u+w *texi* ChangeLog split-man)
590 (cd oldXMenu; chmod u+w *.[ch] Makefile README)
591 (cd lwlib; chmod u+w *.[ch] Makefile README)
592 (cd src; $(MAKE) $(MFLAGS) unlock)
594 relock:
595 chmod u-w $(SOURCES)
596 -(cd elisp; chmod u-w Makefile README *.texi)
597 (cd etc; $(MAKE) $(MFLAGS) relock)
598 (cd lib-src; $(MAKE) $(MFLAGS) relock)
599 (cd lisp; $(MAKE) $(MFLAGS) relock)
600 (cd lisp/term; chmod u+w README *.el)
601 (cd man; chmod u+w *texi* ChangeLog split-man)
602 (cd oldXMenu; chmod u+w *.[ch] Makefile README)
603 (cd lwlib; chmod u+w *.[ch] Makefile README)
604 (cd src; $(MAKE) $(MFLAGS) relock)
606 TAGS tags: lib-src src
607 # The src subdir knows how to do the right thing
608 # even when the build directory and source dir are different.
609 cd src; $(MAKE) tags
611 check:
612 @echo "We don't have any tests for GNU Emacs yet."
614 dist:
615 cd ${srcdir}; ./make-dist
617 .PHONY: info dvi dist check html
618 force-info:
619 info: force-info
620 # Note that man/Makefile knows how to
621 # put the info files in $(srcdir),
622 # so we can do ok running make in the build dir.
623 (cd man; $(MAKE) $(MFLAGS) info)
624 dvi:
625 (cd man; $(MAKE) $(MFLAGS) dvi)
627 #### Bootstrapping.
629 ### This is meant for Emacs maintainers only. It first cleans the
630 ### lisp subdirectory, removing all compiled Lisp files. Then a
631 ### special emacs executable is built from Lisp sources, which is then
632 ### used to compile Lisp files. The last step is a "normal" make.
634 bootstrap: clean bootstrap-lisp-1 bootstrap-src bootstrap-lisp clean all info
636 bootstrap-lisp-1:
637 (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean)
639 bootstrap-lisp:
640 -(cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs)
642 bootstrap-src:
643 (cd src; $(MAKE) $(MFLAGS) bootstrap)