merge trunk
[emacs.git] / Makefile.in
blobc6254fd6098969aa98318dda3b68ca3e62a690ce
1 ### @configure_input@
3 # Copyright (C) 1992-2013 Free Software Foundation, Inc.
5 # This file is part of GNU Emacs.
7 # GNU Emacs is free software: you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation, either version 3 of the License, or
10 # (at your option) any later version.
12 # GNU Emacs is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 # GNU General Public License for more details.
17 # You should have received a copy of the GNU General Public License
18 # along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
20 ### Commentary:
22 # make all to compile and build Emacs.
23 # make install to install it.
24 # make TAGS to update tags tables.
26 # make clean or make mostlyclean
27 # Delete all files from the current directory that are normally
28 # created by building the program. Don't delete the files that
29 # record the configuration. Also preserve files that could be made
30 # by building, but normally aren't because the distribution comes
31 # with them.
33 # Delete `.dvi' files here if they are not part of the distribution.
35 # make distclean
36 # Delete all files from the current directory that are created by
37 # configuring or building the program. If you have unpacked the
38 # source and built the program without creating any other files,
39 # `make distclean' should leave only the files that were in the
40 # distribution.
42 # make maintainer-clean
43 # Delete everything from the current directory that can be
44 # reconstructed with this Makefile. This typically includes
45 # everything deleted by distclean, plus more: .elc files,
46 # C source files produced by Bison, tags tables, info files,
47 # and so on.
49 # make extraclean
50 # Still more severe - delete backup and autosave files, too.
52 # make bootstrap
53 # Removes all the compiled files to force a new bootstrap from a
54 # clean slate, and then build in the normal way.
56 # make docs
57 # Make Emacs documentation files from their sources; requires makeinfo.
59 SHELL = @SHELL@
61 # This may not work with certain non-GNU make's. It only matters when
62 # inheriting a CDPATH not starting with the current directory.
63 CDPATH=
65 # If Make doesn't predefine MAKE, set it here.
66 @SET_MAKE@
68 # Prevent submakes from outputting "Entering directory ..." and
69 # "Leaving directory..." diagnostics that would mess up 'make echo-info'.
70 QUIET_SUBMAKE = MAKELEVEL=0
72 # ==================== Things `configure' Might Edit ====================
74 cache_file = @cache_file@
75 CONFIGURE_FLAGS = --cache-file=$(cache_file)
77 CC=@CC@
78 CFLAGS=@CFLAGS@
79 LDFLAGS=@LDFLAGS@
80 CPPFLAGS=@CPPFLAGS@
81 EXEEXT=@EXEEXT@
83 ### These help us choose version- and architecture-specific directories
84 ### to install files in.
86 ### This should be the number of the Emacs version we're building,
87 ### like `18.59' or `19.0'.
88 version=@version@
90 ### This should be the name of the configuration we're building Emacs
91 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
92 configuration=@configuration@
94 ### The nt/ subdirectory gets built only for MinGW
95 NTDIR=@NTDIR@
97 # ==================== Where To Install Things ====================
99 # Location to install Emacs.app under GNUstep / Mac OS X.
100 # Later values may use these.
101 ns_appbindir=@ns_appbindir@
102 ns_appresdir=@ns_appresdir@
103 # Either yes or no depending on whether this is a relocatable Emacs.app.
104 ns_self_contained=@ns_self_contained@
106 # The default location for installation. Everything is placed in
107 # subdirectories of this directory. The default values for many of
108 # the variables below are expressed in terms of this one, so you may
109 # not need to change them. This defaults to /usr/local.
110 prefix=@prefix@
112 # Like `prefix', but used for architecture-specific files.
113 exec_prefix=@exec_prefix@
115 # Where to install Emacs and other binaries that people will want to
116 # run directly (like etags).
117 bindir=@bindir@
119 # The root of the directory tree for read-only architecture-independent
120 # data files. ${datadir}, ${infodir} and ${mandir} are based on this.
121 datarootdir=@datarootdir@
123 # Where to install architecture-independent data files. ${lispdir}
124 # and ${etcdir} are subdirectories of this.
125 datadir=@datadir@
127 # Where to install and expect the files that Emacs modifies as it
128 # runs. These files are all architecture-independent.
129 # Right now, this is not used.
130 sharedstatedir=@sharedstatedir@
132 # Where to install and expect executable files to be run by Emacs
133 # rather than directly by users (and other architecture-dependent
134 # data, although Emacs does not have any). The executables
135 # are actually installed in ${archlibdir}, which is (normally)
136 # a subdirectory of this.
137 libexecdir=@libexecdir@
139 # Where to install Emacs's man pages.
140 # Note they contain cross-references that expect them to be in section 1.
141 mandir=@mandir@
142 man1dir=$(mandir)/man1
144 # Where to install and expect the info files describing Emacs.
145 infodir=@infodir@
146 # Info files not in the doc/misc directory (we get those via make echo-info).
147 INFO_EXT=@INFO_EXT@
148 INFO_NONMISC=emacs$(INFO_EXT) eintr$(INFO_EXT) elisp$(INFO_EXT)
150 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
151 HAVE_MAKEINFO=@HAVE_MAKEINFO@
153 # Directory for local state files for all programs.
154 localstatedir=@localstatedir@
156 # Where to look for bitmap files.
157 bitmapdir=@bitmapdir@
159 # Where to find the source code. The source code for Emacs's C kernel is
160 # expected to be in ${srcdir}/src, and the source code for Emacs's
161 # utility programs is expected to be in ${srcdir}/lib-src. This is
162 # set by the configure script's `--srcdir' option.
164 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
165 srcdir=@srcdir@
167 # Where the manpage source files are kept.
168 mansrcdir=$(srcdir)/doc/man
170 # Tell make where to find source files; this is needed for the makefiles.
171 VPATH=@srcdir@
173 # Where to find the application default.
174 x_default_search_path=@x_default_search_path@
176 # Where the etc/emacs.desktop file is to be installed.
177 desktopdir=$(datarootdir)/applications
179 # Where the etc/images/icons/hicolor directory is to be installed.
180 icondir=$(datarootdir)/icons
182 # The source directory for the icon files.
183 iconsrcdir=$(srcdir)/etc/images/icons
185 # ==================== Emacs-specific directories ====================
187 # These variables hold the values Emacs will actually use. They are
188 # based on the values of the standard Make variables above.
190 # Where to install the lisp, leim files distributed with
191 # Emacs. This includes the Emacs version, so that the
192 # lisp files for different versions of Emacs will install
193 # themselves in separate directories.
194 lispdir=@lispdir@
195 leimdir=@leimdir@
197 # Directories Emacs should search for standard lisp files.
198 # The default is ${lispdir}:${leimdir}.
199 standardlisppath=@standardlisppath@
201 # Directories Emacs should search for lisp files specific to this
202 # site (i.e. customizations), before consulting ${standardlisppath}.
203 # This should be a colon-separated list of directories.
204 locallisppath=@locallisppath@
206 # Where Emacs will search to find its lisp files. Before
207 # changing this, check to see if your purpose wouldn't
208 # better be served by changing locallisppath. This
209 # should be a colon-separated list of directories.
210 # The default is ${locallisppath}:${standardlisppath}.
211 lisppath=@lisppath@
213 # Where Emacs will search for its lisp files while
214 # building. This is only used during the process of
215 # compiling Emacs, to help Emacs find its lisp files
216 # before they've been installed in their final location.
217 # This should be a colon-separated list of directories.
218 # Normally it points to the lisp/ directory in the sources.
219 buildlisppath=${srcdir}/lisp
221 # Where to install the other architecture-independent
222 # data files distributed with Emacs (like the tutorial,
223 # the cookie recipes and the Zippy database). This path
224 # usually contains the Emacs version number, so the data
225 # files for multiple versions of Emacs may be installed
226 # at once.
227 etcdir=@etcdir@
229 # Where to put executables to be run by Emacs rather than
230 # the user. This path usually includes the Emacs version
231 # and configuration name, so that multiple configurations
232 # for multiple versions of Emacs may be installed at
233 # once.
234 archlibdir=@archlibdir@
236 # Where to put the etc/DOC file.
237 etcdocdir=@etcdocdir@
239 # Where to install Emacs game score files.
240 gamedir=@gamedir@
242 # ==================== Utility Programs for the Build ====================
244 # Allow the user to specify the install program.
245 # Note that if the system does not provide a suitable install,
246 # configure will use build-aux/install-sh. Annoyingly, it does
247 # not use an absolute path. So we must take care to always run
248 # INSTALL-type commands from the directory containing the Makefile.
249 # This explains (I think) the cd thisdir seen in several install rules.
250 INSTALL = @INSTALL@
251 INSTALL_PROGRAM = @INSTALL_PROGRAM@
252 INSTALL_DATA = @INSTALL_DATA@
253 INSTALL_INFO = @INSTALL_INFO@
254 # By default, we uphold the dignity of our programs.
255 INSTALL_STRIP =
256 MKDIR_P = @MKDIR_P@
257 # Create a link to a file in the same directory as the target.
258 LN_S_FILEONLY = @LN_S_FILEONLY@
260 # We use gzip to compress installed .el files.
261 GZIP_PROG = @GZIP_PROG@
263 # ============================= Targets ==============================
265 # Program name transformation.
266 TRANSFORM = @program_transform_name@
268 # What emacs should be called when installed.
269 EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'`
270 EMACS = ${EMACS_NAME}${EXEEXT}
271 EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
273 # Subdirectories to make recursively.
274 SUBDIR = $(NTDIR) lib lib-src src lisp leim
276 # The subdir makefiles created by config.status.
277 SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
278 SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
280 # Subdirectories to install, and where they'll go. lib-src's and nt's
281 # makefiles know how to install them, so we don't do that here.
282 # Directories that cannot simply be copied, eg info, are treated
283 # separately. quail appears twice because in out-of-tree builds, it
284 # exists twice.
285 COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
286 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail
288 all: ${SUBDIR}
290 .PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 FRC
292 removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g'
294 # Generate epaths.h from epaths.in. This target is invoked by `configure'.
295 # See comments in configure.ac for why it is done this way, as opposed
296 # to just letting configure generate epaths.h from epaths.in in a
297 # similar way to how Makefile is made from Makefile.in.
298 epaths-force: FRC
299 @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
300 locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
301 buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
302 x_default_search_path=`echo ${x_default_search_path}`; \
303 gamedir=`echo ${gamedir}`; \
304 sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
305 -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
306 -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
307 -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
308 -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
309 -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
310 -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
311 -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
312 -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
313 -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
314 -e 's;\(#.*PATH_DOC\).*$$;\1 "${etcdocdir}";') && \
315 ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
317 # Convert MSYS-style /x/foo or Windows-style x:\foo file names
318 # into x:/foo that Windows can grok.
319 msys_to_w32=sed -e 's,\\\\,/,g' -e 's,^/\([A-Za-z]\)/,\1:/,'
321 # Transform directory search path and its components. Original can
322 # be MSYS or Windows style. Set path separator to ";", directory
323 # separator to "/" and transform MSYS-style "/c/" to "c:/".
324 # Remove empty path components and escape semicolons.
325 msys_lisppath_to_w32=sed -e 's,\\\\,/,g' \
326 -e 's,\(^\|[:;]\)\([A-Za-z]\):/,\1/\2/,g' \
327 -e 's/:/;/g' -e 's,\(^\|;\)/\([A-Za-z]\)/,\1\2:/,g' \
328 -e 's/;\+/;/g' -e 's/^;//' -e 's/;$$//' -e 's/;/\\\\;/g'
330 # Replace "${prefix}" with '%emacs_dir%' (which expands to install
331 # directory at runtime).
332 msys_prefix_subst=sed -e 's!\(^\|;\)'"$${prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
334 # Quote Sed special characters (except backslash and newline) with
335 # a double backslash.
336 msys_sed_sh_escape=sed -e 's/[];$$*.^[]/\\\\&/g'
338 # The w32 build needs a slightly different editing, and it uses
339 # nt/epaths.nt as the template.
340 # Use the value of ${locallisppath} supplied by `configure',
341 # to support the --enable-locallisppath argument.
342 epaths-force-w32: FRC
343 @(w32srcdir=`echo "${srcdir}" | ${msys_to_w32}` ; \
344 prefixpattern=`echo '${prefix}' | ${msys_to_w32} | ${msys_sed_sh_escape}` ; \
345 locallisppath=`echo '${locallisppath}' | ${msys_lisppath_to_w32} | ${msys_prefix_subst}` ; \
346 sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$ \
347 -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
348 -e '/^.*#/s/@VER@/${version}/g' \
349 -e '/^.*#/s/@CFG@/${configuration}/g' \
350 -e "/^.*#/s|@SRC@|$${w32srcdir}|g") && \
351 ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
353 # If lib/Makefile would build files in '.', then build them before
354 # building 'lib', to avoid races with parallel makes.
355 lib: am--refresh
357 lib-src src: $(NTDIR) lib
359 src: lib-src
361 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'
362 # and `leim'.
363 lisp leim: src
365 # These targets should be "${SUBDIR} without `src'".
366 lib lib-src lisp leim nt: Makefile FRC
367 cd $@ && $(MAKE) all $(MFLAGS) \
368 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
369 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
371 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
372 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
373 # constructed yet) or the empty string (otherwise).
374 # src/Makefile.in uses it to implement conditional dependencies, so that
375 # files that need bootstrap-emacs to be built do not additionally need
376 # to be kept fresher than bootstrap-emacs. Otherwise changing a single
377 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
378 # all preloaded elisp files, and only then dump the actual src/emacs, which
379 # is not wrong, but is overkill in 99.99% of the cases.
380 src: Makefile FRC
381 dirstate='.bzr/checkout/dirstate'; \
382 vcswitness='$$(srcdir)/../'$$dirstate; \
383 [ -r "$(srcdir)/$$dirstate" ] || vcswitness=''; \
384 cd $@ || exit; \
385 boot=bootstrap-emacs$(EXEEXT); \
386 [ ! -x "$$boot" ] || boot=''; \
387 $(MAKE) all $(MFLAGS) \
388 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
389 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot" \
390 VCSWITNESS="$$vcswitness"
392 blessmail: Makefile src FRC
393 cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \
394 MAKE='${MAKE}' archlibdir='$(archlibdir)'
396 # We used to have one rule per */Makefile.in, but that leads to race
397 # conditions with parallel makes, so let's assume that the time stamp on
398 # ./Makefile is representative of the time stamp on all the other Makefiles.
400 # config.status overrides MAKEFILE_NAME with a bogus name when creating
401 # src/epaths.h, so that 'make epaths-force' does not recursively invoke
402 # config.status and overwrite config.status while executing it (Bug#11214).
404 # 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
405 # then attempts to build that file. This forces 'Makefile', 'lib/Makefile',
406 # etc. to be built without running into similar recursion problems.
407 MAKEFILE_NAME = Makefile
408 $(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
409 $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk
410 MAKE='$(MAKE)' ./config.status
412 # Don't erase these files if make is interrupted while refreshing them.
413 .PRECIOUS: Makefile config.status
415 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
416 if [ -x ./config.status ]; then \
417 $(CFG) ./config.status --recheck; \
418 else \
419 $(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \
422 AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
424 $(srcdir)/configure: $(AUTOCONF_INPUTS)
425 cd ${srcdir} && autoconf
427 ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4
428 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
429 cd $(srcdir) && aclocal -I m4
431 AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \
432 $(srcdir)/lib/gnulib.mk
433 $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
434 cd $(srcdir) && automake --gnu -a -c lib/Makefile
436 # Regenerate files that this makefile would have made, if this makefile
437 # had been built by Automake. The name 'am--refresh' is for
438 # compatibility with subsidiary Automake-generated makefiles.
439 am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
440 .PHONY: am--refresh
442 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
443 @ # Usually, there's no need to rebuild src/config.in just
444 @ # because stamp-h.in has changed (since building stamp-h.in
445 @ # refreshes config.in as well), but if config.in is missing
446 @ # then we really need to do something more.
447 [ -r "$@" ] || ( cd ${srcdir} && autoheader )
448 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
449 cd ${srcdir} && autoheader
450 rm -f $(srcdir)/src/stamp-h.in
451 echo timestamp > $(srcdir)/src/stamp-h.in
453 # ==================== Installation ====================
455 .PHONY: install install-arch-dep install-arch-indep install-etcdoc install-info
456 .PHONY: install-man install-etc install-strip install-$(NTDIR)
457 .PHONY: uninstall uninstall-$(NTDIR)
459 ## If we let lib-src do its own installation, that means we
460 ## don't have to duplicate the list of utilities to install in
461 ## this Makefile as well.
463 install: all install-arch-indep install-etcdoc install-arch-dep install-$(NTDIR) blessmail
464 @true
466 ## Ensure that $subdir contains a subdirs.el file.
467 ## Here and elsewhere, we set the umask so that any created files are
468 ## world-readable.
469 ## TODO it might be good to warn about non-standard permissions of
470 ## pre-existing directories, but that does not seem easy.
471 write_subdir=if [ -f $${subdir}/subdirs.el ]; \
472 then true; \
473 else \
474 umask 022; \
475 ${MKDIR_P} $${subdir}; \
476 (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
477 echo " (normal-top-level-add-subdirs-to-load-path))") \
478 > $${subdir}/subdirs.el; \
481 ### Install the executables that were compiled specifically for this machine.
482 ### We do install-arch-indep first because the executable needs the
483 ### Lisp files and DOC file to work properly.
484 install-arch-dep: src install-arch-indep install-etcdoc install-$(NTDIR)
485 umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
486 cd lib-src && \
487 $(MAKE) install $(MFLAGS) prefix=${prefix} \
488 exec_prefix=${exec_prefix} bindir=${bindir} \
489 libexecdir=${libexecdir} archlibdir=${archlibdir} \
490 INSTALL_STRIP=${INSTALL_STRIP}
491 if test "${ns_self_contained}" = "no"; then \
492 ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
493 chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) || true; \
494 if test "x${NO_BIN_LINK}" = x; then \
495 rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
496 cd $(DESTDIR)${bindir} && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
497 fi; \
498 else \
499 subdir=${ns_appresdir}/site-lisp; \
500 ${write_subdir} || exit 1; \
501 rm -rf ${ns_appresdir}/share; \
504 ### Windows-specific install target for installing programs produced
505 ### in nt/, and its Posix do-nothing shadow.
506 install-:
507 install-nt:
508 cd $(NTDIR) && \
509 $(MAKE) install $(MFLAGS) prefix=${prefix} \
510 exec_prefix=${exec_prefix} bindir=${bindir} \
511 libexecdir=${libexecdir} archlibdir=${archlibdir} \
512 INSTALL_STRIP=${INSTALL_STRIP}
514 ## In the share directory, we are deleting:
515 ## applications (with emacs.desktop, also found in etc/)
516 ## emacs (basically empty except for unneeded site-lisp directories)
517 ## icons (duplicates etc/images/icons/hicolor)
519 ## This is install-etc for everything except self-contained-ns builds.
520 ## For them, it is empty.
521 INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
523 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
524 ## Needs to be the user running install, so configure can't set it.
525 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
526 `id -un 2> /dev/null`; do \
527 [ -n "$${installuser}" ] && break ; \
528 done
530 ### Install the files that are machine-independent.
531 ### Most of them come straight from the distribution; the exception is
532 ### the DOC file, which is copied from the build directory.
534 ## We delete each directory in ${COPYDESTS} before we copy into it;
535 ## that way, we can reinstall over directories that have been put in
536 ## place with their files read-only (perhaps because they are checked
537 ## into RCS). In order to make this safe, we make sure that the
538 ## source exists and is distinct from the destination.
540 ## We delete etc/DOC* because there may be irrelevant DOC files from
541 ## other builds in the source directory. This is ok because we just
542 ## deleted the entire installed etc/ directory and recreated it.
543 ## install-etcdoc installs the relevant DOC.
545 ## Note that we install etc/refcards/*.ps if present.
546 ## TODO we should compress these if GZIP_PROG is set.
547 ## It would be simpler to have a separate install rule for etc/refcards
548 ## (maybe move it to doc/refcards?).
550 ## Note that the Makefiles in the etc directory are potentially useful
551 ## in an installed Emacs, so should not be excluded.
553 ## We used to create locallisppath, but if it points to non-standard
554 ## locations, is not really Emacs's job to create these directories,
555 ## so it is no longer done.
557 ## Note that we use tar instead of plain old cp -R/-r because the latter
558 ## is apparently not portable (even in 2012!).
559 ## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
560 ## I have no idea which platforms Emacs supports where cp -R does not
561 ## work correctly, and therefore no idea when tar can be replaced.
562 ## See also these comments from 2004 about cp -r working fine:
563 ## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
564 install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
565 -set ${COPYDESTS} ; \
566 unset CDPATH; \
567 $(set_installuser); \
568 for dir in ${COPYDIR} ; do \
569 [ -d $${dir} ] || exit 1 ; \
570 dest=$$1 ; shift ; \
571 [ -d $${dest} ] && \
572 [ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \
573 continue ; \
574 if [ "$${dir}" = "leim/quail" ]; then \
575 [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \
576 continue ; \
577 else \
578 rm -rf $${dest} ; \
579 umask 022; ${MKDIR_P} $${dest} ; \
580 fi ; \
581 echo "Copying $${dir} to $${dest}..." ; \
582 (cd $${dir}; tar -chf - . ) \
583 | (cd $${dest}; umask 022; \
584 tar -xvf - && cat > /dev/null) || exit 1; \
585 if [ "$${dir}" = "${srcdir}/etc" ]; then \
586 rm -f $${dest}/DOC* ; \
587 rm -f $${dest}/refcards/*.aux $${dest}/refcards/*.dvi; \
588 rm -f $${dest}/refcards/*.log; \
589 else true; \
590 fi; \
591 for subdir in `find $${dest} -type d -print` ; do \
592 chmod a+rx $${subdir} ; \
593 rm -f $${subdir}/.gitignore ; \
594 rm -f $${subdir}/.arch-inventory ; \
595 rm -f $${subdir}/.DS_Store ; \
596 rm -f $${subdir}/\#* ; \
597 rm -f $${subdir}/.\#* ; \
598 rm -f $${subdir}/*~ ; \
599 rm -f $${subdir}/*.orig ; \
600 rm -f $${subdir}/ChangeLog* ; \
601 [ "$${dir}" != "${srcdir}/etc" ] && \
602 rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
603 done ; \
604 find $${dest} -exec chown $${installuser} {} ';' ;\
605 done
606 -rm -f $(DESTDIR)${leimdir}/leim-list.el
607 ${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el
608 -rm -f $(DESTDIR)${lispdir}/subdirs.el
609 umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir}
610 subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
611 ${write_subdir}
612 subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
613 ${write_subdir} || true
614 [ -z "${GZIP_PROG}" ] || \
615 ( echo "Compressing *.el ..." ; \
616 unset CDPATH; \
617 thisdir=`/bin/pwd`; \
618 for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \
619 cd $${thisdir} ; \
620 cd $${dir} || exit 1 ; \
621 for f in `find . -name "*.elc" -print`; do \
622 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
623 done ; \
624 done )
625 -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
627 ## The above chmods are needed because "umask 022; tar ..." is not
628 ## guaranteed to do the right thing; eg if we are root and tar is
629 ## preserving source permissions.
631 ## Note that install-arch-indep deletes and recreates the entire
632 ## installed etc/ directory, so we need it to run before this does.
633 install-etcdoc: src install-arch-indep
634 -unset CDPATH; \
635 umask 022; ${MKDIR_P} $(DESTDIR)${etcdocdir} ; \
636 if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${etcdocdir}; /bin/pwd` ]; \
637 then \
638 docfile="DOC"; \
639 echo "Copying etc/$${docfile} to $(DESTDIR)${etcdocdir} ..." ; \
640 ${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${etcdocdir}/$${docfile}; \
641 $(set_installuser); \
642 chown $${installuser} $(DESTDIR)${etcdocdir}/$${docfile} || true ; \
643 else true; fi
645 install-info: info
646 umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
647 -unset CDPATH; \
648 thisdir=`/bin/pwd`; \
649 [ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \
650 (cd $(DESTDIR)${infodir}; \
651 [ -f dir ] || \
652 (cd $${thisdir}; \
653 ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
654 info_misc=`cd $${thisdir}/doc/misc && \
655 $(QUIET_SUBMAKE) $(MAKE) -s echo-info \
656 `; \
657 cd ${srcdir}/info ; \
658 for elt in ${INFO_NONMISC} $${info_misc}; do \
659 test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
660 for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
661 (cd $${thisdir}; \
662 ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
663 [ -n "${GZIP_PROG}" ] || continue ; \
664 rm -f $(DESTDIR)${infodir}/$$f.gz; \
665 ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
666 done; \
667 (cd $${thisdir}; \
668 ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
669 done)
671 ## "gzip || true" is because some gzips exit with non-zero status
672 ## if compression would not reduce the file size. Eg, the gzip in
673 ## OpenBSD 4.9 seems to do this (2013/03). In Emacs, this can
674 ## only happen with the tiny ctags.1 manpage. We don't really care if
675 ## ctags.1 is compressed or not. "gzip -f" is another option here,
676 ## but not sure if portable.
677 install-man:
678 umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
679 thisdir=`/bin/pwd`; \
680 cd ${mansrcdir}; \
681 for page in *.1; do \
682 dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
683 (cd $${thisdir}; \
684 ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${dest}); \
685 [ -n "${GZIP_PROG}" ] || continue ; \
686 rm -f $(DESTDIR)${man1dir}/$${dest}.gz; \
687 ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${dest} || true; \
688 done
690 ## Install those items from etc/ that need to end up elsewhere.
692 ## If you prefer, choose "emacs22" at installation time.
693 ## Note: emacs22 does not have all the resolutions.
694 EMACS_ICON=emacs
696 install-etc:
697 umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
698 tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \
699 emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \
700 sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \
701 -e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \
702 ${srcdir}/etc/emacs.desktop > $${tmp}; \
703 ${INSTALL_DATA} $${tmp} $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop; \
704 rm -f $${tmp}
705 thisdir=`/bin/pwd`; \
706 cd ${iconsrcdir} || exit 1; umask 022 ; \
707 for dir in */*/apps */*/mimetypes; do \
708 [ -d $${dir} ] || continue ; \
709 ( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \
710 for icon in $${dir}/${EMACS_ICON}[.-]*; do \
711 [ -r $${icon} ] || continue ; \
712 ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
713 dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
714 ( cd $${thisdir}; \
715 ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${dir}/$${dest} ) \
716 || exit 1; \
717 done ; \
718 done
720 ### Build Emacs and install it, stripping binaries while installing them.
721 install-strip:
722 $(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
724 ### Delete all the installed files that the `install' target would
725 ### create (but not the noninstalled files such as `make all' would create).
727 ### Don't delete the lisp and etc directories if they're in the source tree.
728 uninstall: uninstall-$(NTDIR) uninstall-doc
729 cd lib-src && \
730 $(MAKE) $(MFLAGS) uninstall \
731 prefix=${prefix} exec_prefix=${exec_prefix} \
732 bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
734 -unset CDPATH; \
735 for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \
736 if [ -d $${dir} ]; then \
737 case `cd $${dir} ; /bin/pwd` in \
738 `cd ${srcdir} ; /bin/pwd`* ) ;; \
739 * ) rm -rf $${dir} ;; \
740 esac ; \
741 case $${dir} in \
742 $(DESTDIR)${datadir}/emacs/${version}/* ) \
743 rm -rf $(DESTDIR)${datadir}/emacs/${version} \
744 ;; \
745 esac ; \
746 fi ; \
747 done
748 -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
749 thisdir=`/bin/pwd`; \
750 (info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
751 if cd $(DESTDIR)${infodir}; then \
752 for elt in ${INFO_NONMISC} $${info_misc}; do \
753 (cd $${thisdir}; \
754 $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
755 if [ -n "${GZIP_PROG}" ]; then \
756 ext=.gz; else ext=; fi; \
757 rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
758 done; \
760 (if [ -n "${GZIP_PROG}" ]; then \
761 ext=.gz; else ext=; fi; \
762 if cd ${mansrcdir}; then \
763 for page in *.1; do \
764 rm -f $(DESTDIR)${man1dir}/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
766 (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS) || true)
767 (if cd $(DESTDIR)${icondir}; then \
768 rm -f hicolor/*x*/apps/${EMACS_NAME}.png \
769 hicolor/scalable/apps/${EMACS_NAME}.svg \
770 hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \
772 -rm -f $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop
773 for file in snake-scores tetris-scores; do \
774 file=$(DESTDIR)${gamedir}/$${file}; \
775 [ -s $${file} ] || rm -f $$file; \
776 done
778 ### Windows-specific uninstall target for removing programs produced
779 ### in nt/, and its Posix do-nothing shadow.
780 uninstall-:
781 uninstall-nt:
782 cd $(NTDIR) && \
783 $(MAKE) $(MFLAGS) uninstall \
784 prefix=${prefix} exec_prefix=${exec_prefix} \
785 bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
787 FRC:
789 # ==================== Cleaning up and miscellanea ====================
791 .PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
793 ### `mostlyclean'
794 ### Like `clean', but may refrain from deleting a few files that people
795 ### normally don't want to recompile. For example, the `mostlyclean'
796 ### target for GCC does not delete `libgcc.a', because recompiling it
797 ### is rarely necessary and takes a lot of time.
798 mostlyclean: FRC
799 cd src && $(MAKE) $(MFLAGS) mostlyclean
800 cd oldXMenu && $(MAKE) $(MFLAGS) mostlyclean
801 cd lwlib && $(MAKE) $(MFLAGS) mostlyclean
802 cd lib && $(MAKE) $(MFLAGS) mostlyclean
803 cd lib-src && $(MAKE) $(MFLAGS) mostlyclean
804 cd nt && $(MAKE) $(MFLAGS) mostlyclean
805 -cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean
806 -cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean
807 -cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean
808 -cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean
809 cd leim && $(MAKE) $(MFLAGS) mostlyclean
811 ### `clean'
812 ### Delete all files from the current directory that are normally
813 ### created by building the program. Don't delete the files that
814 ### record the configuration. Also preserve files that could be made
815 ### by building, but normally aren't because the distribution comes
816 ### with them.
818 ### Delete `.dvi' files here if they are not part of the distribution.
819 clean: FRC
820 -rm -f etc/emacs.tmpdesktop
821 cd src && $(MAKE) $(MFLAGS) clean
822 cd oldXMenu && $(MAKE) $(MFLAGS) clean
823 cd lwlib && $(MAKE) $(MFLAGS) clean
824 cd lib && $(MAKE) $(MFLAGS) clean
825 cd lib-src && $(MAKE) $(MFLAGS) clean
826 cd nt && $(MAKE) $(MFLAGS) clean
827 -cd doc/emacs && $(MAKE) $(MFLAGS) clean
828 -cd doc/misc && $(MAKE) $(MFLAGS) clean
829 -cd doc/lispref && $(MAKE) $(MFLAGS) clean
830 -cd doc/lispintro && $(MAKE) $(MFLAGS) clean
831 cd leim && $(MAKE) $(MFLAGS) clean
832 cd nextstep && $(MAKE) $(MFLAGS) clean
834 ### `bootclean'
835 ### Delete all files that need to be remade for a clean bootstrap.
836 top_bootclean=\
837 rm -f config.cache config.log
838 ### `distclean'
839 ### Delete all files from the current directory that are created by
840 ### configuring or building the program. If you have unpacked the
841 ### source and built the program without creating any other files,
842 ### `make distclean' should leave only the files that were in the
843 ### distribution.
844 top_distclean=\
845 ${top_bootclean}; \
846 rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
847 distclean: FRC
848 cd src && $(MAKE) $(MFLAGS) distclean
849 cd oldXMenu && $(MAKE) $(MFLAGS) distclean
850 cd lwlib && $(MAKE) $(MFLAGS) distclean
851 cd lib && $(MAKE) $(MFLAGS) distclean
852 cd lib-src && $(MAKE) $(MFLAGS) distclean
853 cd nt && $(MAKE) $(MFLAGS) distclean
854 cd doc/emacs && $(MAKE) $(MFLAGS) distclean
855 cd doc/misc && $(MAKE) $(MFLAGS) distclean
856 cd doc/lispref && $(MAKE) $(MFLAGS) distclean
857 cd doc/lispintro && $(MAKE) $(MFLAGS) distclean
858 cd leim && $(MAKE) $(MFLAGS) distclean
859 cd lisp && $(MAKE) $(MFLAGS) distclean
860 cd nextstep && $(MAKE) $(MFLAGS) distclean
861 [ ! -d test/automated ] || { \
862 cd test/automated && $(MAKE) $(MFLAGS) distclean; \
864 ${top_distclean}
866 ### `bootstrap-clean'
867 ### Delete everything that can be reconstructed by `make' and that
868 ### needs to be deleted in order to force a bootstrap from a clean state.
869 bootstrap-clean: FRC
870 cd src && $(MAKE) $(MFLAGS) bootstrap-clean
871 cd oldXMenu && $(MAKE) $(MFLAGS) maintainer-clean
872 cd lwlib && $(MAKE) $(MFLAGS) maintainer-clean
873 cd lib && $(MAKE) $(MFLAGS) maintainer-clean
874 cd lib-src && $(MAKE) $(MFLAGS) maintainer-clean
875 cd nt && $(MAKE) $(MFLAGS) maintainer-clean
876 -cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean
877 -cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean
878 -cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean
879 -cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean
880 cd leim && $(MAKE) $(MFLAGS) maintainer-clean
881 cd lisp && $(MAKE) $(MFLAGS) bootstrap-clean
882 cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean
883 [ ! -d test/automated ] || { \
884 cd test/automated && $(MAKE) $(MFLAGS) bootstrap-clean; \
886 [ ! -f config.log ] || mv -f config.log config.log~
887 ${top_bootclean}
889 ### `maintainer-clean'
890 ### Delete everything from the current directory that can be
891 ### reconstructed with this Makefile. This typically includes
892 ### everything deleted by distclean, plus more: C source files
893 ### produced by Bison, tags tables, info files, and so on.
895 ### One exception, however: `make maintainer-clean' should not delete
896 ### `configure' even if `configure' can be remade using a rule in the
897 ### Makefile. More generally, `make maintainer-clean' should not delete
898 ### anything that needs to exist in order to run `configure' and then
899 ### begin to build the program.
900 top_maintainer_clean=\
901 ${top_distclean}; \
902 rm -fr autom4te.cache
903 maintainer-clean: bootstrap-clean FRC
904 cd src && $(MAKE) $(MFLAGS) maintainer-clean
905 cd lisp && $(MAKE) $(MFLAGS) maintainer-clean
906 [ ! -d test/automated ] || { \
907 cd test/automated && $(MAKE) $(MFLAGS) maintainer-clean; \
909 ${top_maintainer_clean}
911 ### This doesn't actually appear in the coding standards, but Karl
912 ### says GCC supports it, and that's where the configuration part of
913 ### the coding standards seem to come from. It's like distclean, but
914 ### it deletes backup and autosave files too.
915 extraclean:
916 for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
917 ${top_maintainer_clean}
918 -rm -f config-tmp-*
919 -rm -f *~ \#*
921 # The src subdir knows how to do the right thing
922 # even when the build directory and source dir are different.
923 .PHONY: TAGS tags
924 TAGS tags: lib lib-src src
925 cd src; $(MAKE) $(MFLAGS) tags
927 check:
928 @if test ! -d test/automated; then \
929 echo "You do not seem to have the test/ directory."; \
930 echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
931 else \
932 cd test/automated && $(MAKE) $(MFLAGS) check; \
935 dist:
936 cd ${srcdir}; ./make-dist
938 DVIS = lispref-dvi lispintro-dvi emacs-dvi misc-dvi
939 HTMLS = lispref-html lispintro-html emacs-html misc-html
940 INFOS = lispref-info lispintro-info emacs-info misc-info
941 PDFS = lispref-pdf lispintro-pdf emacs-pdf misc-pdf
942 PSS = lispref-ps lispintro-ps emacs-ps misc-ps
944 DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
945 $(DOCS):
946 t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2
948 .PHONY: $(DOCS) docs pdf ps
949 .PHONY: info dvi dist check html info-real force-info check-info-dir
951 ## TODO add etc/refcards.
952 docs: $(DOCS)
953 dvi: $(DVIS)
954 html: $(HTMLS)
955 info-real: $(INFOS)
956 pdf: $(PDFS)
957 ps: $(PSS)
960 INSTALL_DVI = install-emacs-dvi install-lispref-dvi \
961 install-lispintro-dvi install-misc-dvi
962 INSTALL_HTML = install-emacs-html install-lispref-html \
963 install-lispintro-html install-misc-html
964 INSTALL_PDF = install-emacs-pdf install-lispref-pdf \
965 install-lispintro-pdf install-misc-pdf
966 INSTALL_PS = install-emacs-ps install-lispref-ps \
967 install-lispintro-ps install-misc-ps
968 INSTALL_DOC = $(INSTALL_DVI) $(INSTALL_HTML) $(INSTALL_PDF) $(INSTALL_PS)
970 ## Install non .info forms of the documentation.
971 ## TODO add etc/refcards.
972 $(INSTALL_DOC):
973 t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
975 .PHONY: $(INSTALL_DOC) install-doc
976 .PHONY: install-dvi install-html install-pdf install-ps
978 install-doc: $(INSTALL_DOC)
979 install-dvi: $(INSTALL_DVI)
980 install-html: $(INSTALL_HTML)
981 install-pdf: $(INSTALL_PDF)
982 install-ps: $(INSTALL_PS)
985 UNINSTALL_DVI = uninstall-emacs-dvi uninstall-lispref-dvi \
986 uninstall-lispintro-dvi uninstall-misc-dvi
987 UNINSTALL_HTML = uninstall-emacs-html uninstall-lispref-html \
988 uninstall-lispintro-html uninstall-misc-html
989 UNINSTALL_PDF = uninstall-emacs-pdf uninstall-lispref-pdf \
990 uninstall-lispintro-pdf uninstall-misc-pdf
991 UNINSTALL_PS = uninstall-emacs-ps uninstall-lispref-ps \
992 uninstall-lispintro-ps uninstall-misc-ps
993 UNINSTALL_DOC = $(UNINSTALL_DVI) $(UNINSTALL_HTML) $(UNINSTALL_PDF) $(UNINSTALL_PS)
995 $(UNINSTALL_DOC):
996 t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
998 .PHONY: $(UNINSTALL_DOC) uninstall-doc
999 .PHONY: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps
1001 uninstall-doc: $(UNINSTALL_DOC)
1002 uninstall-dvi: $(UNINSTALL_DVI)
1003 uninstall-html: $(UNINSTALL_HTML)
1004 uninstall-pdf: $(UNINSTALL_PDF)
1005 uninstall-ps: $(UNINSTALL_PS)
1008 force-info:
1009 # Note that man/Makefile knows how to put the info files in $(srcdir),
1010 # so we can do ok running make in the build dir.
1011 # This used to have a clause that exited with an error if MAKEINFO = no.
1012 # But it is inappropriate to do so without checking if makeinfo is
1013 # actually needed - it is not if the info files are up-to-date. (Bug#3982)
1014 # Only the doc/*/Makefiles can decide that, so we let those rules run
1015 # and give a standard error if makeinfo is needed but missing.
1016 # While it would be nice to give a more detailed error message, that
1017 # would require changing every rule in doc/ that builds an info file,
1018 # and it's not worth it. This case is only relevant if you download a
1019 # release, then change the .texi files.
1020 info: force-info
1021 @if test "$(HAVE_MAKEINFO)" = "no"; then \
1022 echo "Configured --without-makeinfo, not building manuals" ; \
1023 else \
1024 $(MAKE) $(MFLAGS) info-real ; \
1027 # The info/dir file must be updated by hand when new manuals are added.
1028 # Cannot add an info/dir entry for efaq-w32 since it is not installed
1029 # on all platforms.
1030 check-info-dir: info
1031 cd info ; \
1032 missing= ; \
1033 for file in *; do \
1034 test -f "$${file}" || continue ; \
1035 case $${file} in \
1036 *-[0-9]*|COPYING|dir|efaq-w32*) continue ;; \
1037 esac ; \
1038 file=`echo $${file} | sed 's/\.info//'` ; \
1039 grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
1040 done ; \
1041 if test -n "$${missing}"; then \
1042 echo "Missing info/dir entries: $${missing}" ; \
1043 exit 1 ; \
1044 fi ; \
1045 echo "info/dir is OK"
1047 #### Bootstrapping.
1049 ### This first cleans the lisp subdirectory, removing all compiled
1050 ### Lisp files. Then re-run make to build all the files anew.
1052 .PHONY: bootstrap
1054 # Bootstrapping does the following:
1055 # * Remove files to start from a bootstrap-clean slate.
1056 # * Run autogen.sh, falling back on copy_autogen if autogen.sh fails.
1057 # * Rebuild Makefile, to update the build procedure itself.
1058 # * Do the actual build.
1059 bootstrap: bootstrap-clean FRC
1060 cd $(srcdir) && { ./autogen.sh || autogen/copy_autogen; }
1061 $(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
1062 $(MAKE) $(MFLAGS) info all
1064 .PHONY: check-declare
1066 check-declare:
1067 @if [ ! -f $(srcdir)/src/emacs ]; then \
1068 echo "You must build Emacs to use this command"; \
1069 exit 1; \
1071 cd leim && $(MAKE) $(MFLAGS) $@
1072 cd lisp && $(MAKE) $(MFLAGS) $@