* src/fileio.c (Fwrite_region): Delay the defaulting to beg&z to after
[emacs.git] / Makefile.in
blob1637f488a01599356c3f908ffdd8cfa6e51a5a62
1 # DIST: This is the distribution Makefile for Emacs. configure can
2 # DIST: make most of the changes to this file you might want, so try
3 # DIST: that first.
5 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
6 # 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
7 # Free Software Foundation, Inc.
9 # This file is part of GNU Emacs.
11 # GNU Emacs is free software: you can redistribute it and/or modify
12 # it under the terms of the GNU General Public License as published by
13 # the Free Software Foundation, either version 3 of the License, or
14 # (at your option) any later version.
16 # GNU Emacs is distributed in the hope that it will be useful,
17 # but WITHOUT ANY WARRANTY; without even the implied warranty of
18 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 # GNU General Public License for more details.
21 # You should have received a copy of the GNU General Public License
22 # along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
24 ### Commentary:
26 # make all to compile and build Emacs.
27 # make install to install it.
28 # make TAGS to update tags tables.
30 # make clean or make mostlyclean
31 # Delete all files from the current directory that are normally
32 # created by building the program. Don't delete the files that
33 # record the configuration. Also preserve files that could be made
34 # by building, but normally aren't because the distribution comes
35 # with them.
37 # Delete `.dvi' files here if they are not part of the distribution.
39 # make distclean
40 # Delete all files from the current directory that are created by
41 # configuring or building the program. If you have unpacked the
42 # source and built the program without creating any other files,
43 # `make distclean' should leave only the files that were in the
44 # distribution.
46 # make maintainer-clean
47 # Delete everything from the current directory that can be
48 # reconstructed with this Makefile. This typically includes
49 # everything deleted by distclean, plus more: .elc files,
50 # C source files produced by Bison, tags tables, info files,
51 # and so on.
53 # make extraclean
54 # Still more severe - delete backup and autosave files, too.
56 # make bootstrap
57 # Recompiles all the Emacs Lisp files using the latest source,
58 # then rebuilds Emacs.
60 # make bootfast
61 # Recompiles changed Emacs Lisp files using the latest C source,
62 # then rebuilds Emacs. This is faster than `make bootstrap'
63 # but once in a while an old .elc file can cause trouble.
65 SHELL = /bin/sh
67 # This may not work with certain non-GNU make's. It only matters when
68 # inheriting a CDPATH not starting with the current directory.
69 CDPATH=
71 # If Make doesn't predefine MAKE, set it here.
72 @SET_MAKE@
74 # ==================== Things `configure' Might Edit ====================
76 CC=@CC@
77 CPP=@CPP@
78 C_SWITCH_SYSTEM=@c_switch_system@
79 ALLOCA=@ALLOCA@
80 LN_S=@LN_S@
81 CFLAGS=@CFLAGS@
82 LDFLAGS=@LDFLAGS@
83 CPPFLAGS=@CPPFLAGS@
84 C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
85 LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
86 EXEEXT=@EXEEXT@
87 MAKEINFO=@MAKEINFO@
89 ### These help us choose version- and architecture-specific directories
90 ### to install files in.
92 ### This should be the number of the Emacs version we're building,
93 ### like `18.59' or `19.0'.
94 version=@version@
96 ### This should be the name of the configuration we're building Emacs
97 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
98 configuration=@configuration@
100 # ==================== Where To Install Things ====================
102 # The default location for installation. Everything is placed in
103 # subdirectories of this directory. The default values for many of
104 # the variables below are expressed in terms of this one, so you may
105 # not need to change them. This defaults to /usr/local.
106 prefix=@prefix@
108 # Like `prefix', but used for architecture-specific files.
109 exec_prefix=@exec_prefix@
111 # Where to install Emacs and other binaries that people will want to
112 # run directly (like etags).
113 bindir=@bindir@
115 # The root of the directory tree for read-only architecture-independent
116 # data files. ${datadir}, ${infodir} and ${mandir} are based on this.
117 datarootdir=@datarootdir@
119 # Where to install architecture-independent data files. ${lispdir}
120 # and ${etcdir} are subdirectories of this.
121 datadir=@datadir@
123 # Where to install and expect the files that Emacs modifies as it
124 # runs. These files are all architecture-independent.
125 # Right now, this is not used.
126 sharedstatedir=@sharedstatedir@
128 # Where to install and expect executable files to be run by Emacs
129 # rather than directly by users, and other architecture-dependent
130 # data. ${archlibdir} is a subdirectory of this.
131 libexecdir=@libexecdir@
133 # Where to install Emacs's man pages, and what extension they should have.
134 mandir=@mandir@
135 manext=.1
136 man1dir=$(mandir)/man1
138 # Where to install and expect the info files describing Emacs. In the
139 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
140 # since there are now many packages documented with the texinfo
141 # system, it is inappropriate to imply that it is part of Emacs.
142 infodir=@infodir@
143 INFO_FILES=ada-mode autotype calc ccmode cl dbus dired-x ebrowse ediff \
144 efaq eintr elisp emacs emacs-mime epa erc eshell eudc \
145 flymake forms gnus idlwave info message mh-e newsticker \
146 nxml-mode org pcl-cvs pgg rcirc reftex remember sc ses sieve \
147 speedbar tramp vip viper widget woman smtpmail url
149 # Directory for local state files for all programs.
150 localstatedir=@localstatedir@
152 # Where to look for bitmap files.
153 bitmapdir=@bitmapdir@
155 # Where to find the source code. The source code for Emacs's C kernel is
156 # expected to be in ${srcdir}/src, and the source code for Emacs's
157 # utility programs is expected to be in ${srcdir}/lib-src. This is
158 # set by the configure script's `--srcdir' option.
160 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
161 srcdir=@srcdir@
163 # Where the manpage source files are kept.
164 mansrcdir=$(srcdir)/doc/man
166 # Tell make where to find source files; this is needed for the makefiles.
167 VPATH=@srcdir@
169 # Where to find the application default.
170 x_default_search_path=@x_default_search_path@
172 # Location to install Emacs.app on Mac OS X
173 carbon_appdir=@carbon_appdir@
175 # Where the etc/emacs.desktop file is to be installed.
176 desktopdir=$(datarootdir)/applications
178 # Where the etc/images/icons/hicolor directory is to be installed.
179 icondir=$(datarootdir)/icons
181 # The source directory for the icon files.
182 iconsrcdir=$(srcdir)/etc/images/icons
184 # ==================== Emacs-specific directories ====================
186 # These variables hold the values Emacs will actually use. They are
187 # based on the values of the standard Make variables above.
189 # Where to install the lisp files distributed with
190 # Emacs. This includes the Emacs version, so that the
191 # lisp files for different versions of Emacs will install
192 # themselves in separate directories.
193 lispdir=@lispdir@
195 # Directories Emacs should search for lisp files specific
196 # to this site (i.e. customizations), before consulting
197 # ${lispdir}. This should be a colon-separated list of
198 # directories.
199 locallisppath=@locallisppath@
201 # Where Emacs will search to find its lisp files. Before
202 # changing this, check to see if your purpose wouldn't
203 # better be served by changing locallisppath. This
204 # should be a colon-separated list of directories.
205 lisppath=@lisppath@
207 # Where Emacs will search for its lisp files while
208 # building. This is only used during the process of
209 # compiling Emacs, to help Emacs find its lisp files
210 # before they've been installed in their final location.
211 # It's usually identical to lisppath, except that
212 # it does not include locallisppath, and the
213 # entry for the directory containing the installed lisp
214 # files has been replaced with ../lisp. This should be a
215 # colon-separated list of directories.
216 buildlisppath=${srcdir}/lisp
218 # Where to install the other architecture-independent
219 # data files distributed with Emacs (like the tutorial,
220 # the cookie recipes and the Zippy database). This path
221 # usually contains the Emacs version number, so the data
222 # files for multiple versions of Emacs may be installed
223 # at once.
224 etcdir=@etcdir@
226 # Where to put executables to be run by Emacs rather than
227 # the user. This path usually includes the Emacs version
228 # and configuration name, so that multiple configurations
229 # for multiple versions of Emacs may be installed at
230 # once.
231 archlibdir=@archlibdir@
233 # Where to put the docstring file.
234 docdir=@docdir@
236 # Where to install Emacs game score files.
237 gamedir=@gamedir@
239 # ==================== Utility Programs for the Build ====================
241 # Allow the user to specify the install program.
242 INSTALL = @INSTALL@
243 INSTALL_PROGRAM = @INSTALL_PROGRAM@
244 INSTALL_DATA = @INSTALL_DATA@
245 INSTALL_INFO = @INSTALL_INFO@
246 # By default, we uphold the dignity of our programs.
247 INSTALL_STRIP =
249 # We use gzip to compress installed .el files.
250 GZIP_PROG = @GZIP_PROG@
252 # ============================= Targets ==============================
254 # Program name transformation.
255 TRANSFORM = @program_transform_name@
257 # What emacs should be called when installed.
258 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
259 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
261 # Subdirectories to make recursively. `lisp' is not included
262 # because the compiled lisp files are part of the distribution.
263 # leim is not included because it needs special handling.
264 SUBDIR = lib-src src
266 # The subdir makefiles created by config.status.
267 SUBDIR_MAKEFILES = lib-src/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispref/Makefile doc/lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile lisp/Makefile
269 # Subdirectories to install, and where they'll go.
270 # lib-src's makefile knows how to install it, so we don't do that here.
271 # leim's makefile also knows how to install it, so we don't do that here.
272 # When installing the info files, we need to do special things to
273 # avoid nuking an existing dir file, so we don't do that here;
274 # instead, we have written out explicit code in the `install' targets.
275 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
276 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
278 all: ${SUBDIR} leim
280 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
282 # Generate epaths.h from epaths.in. This target is invoked by `configure'.
283 epaths-force: FRC
284 @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
285 buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
286 x_default_search_path=`echo ${x_default_search_path}`; \
287 gamedir=`echo ${gamedir}`; \
288 sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
289 -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";' \
290 -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
291 -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
292 -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
293 -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
294 -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
295 -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
296 -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
297 -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
298 -e 's;/[*] *arch-tag:.*;/*;') && \
299 ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
301 # For parallel make, src should be built before leim.
302 # "export PARALLEL=0" is for SGI's Make, to prevent it from
303 # running more than 1 process in the leim directory, especially for
304 # the $TIT files there.
305 leim: src ${SUBDIR_MAKEFILES} FRC
306 (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
307 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
308 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
310 src: lib-src FRC
312 lib-src: FRC src/config.stamp
314 .RECURSIVE: ${SUBDIR} leim
316 ${SUBDIR}: maybe_bootstrap ${SUBDIR_MAKEFILES} FRC
317 cd $@; $(MAKE) all $(MFLAGS) \
318 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
319 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
321 blessmail: ${SUBDIR_MAKEFILES} src FRC
322 cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
323 MAKE='${MAKE}' archlibdir='$(archlibdir)'
325 Makefile: $(srcdir)/Makefile.in config.status
326 ./config.status
328 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
329 ./config.status --recheck
331 AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/m4/getopt.m4
333 $(srcdir)/configure: $(AUTOCONF_INPUTS)
334 cd ${srcdir} && autoconf
336 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
337 @true
338 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
339 cd ${srcdir} && autoheader
340 rm -f $(srcdir)/src/stamp-h.in
341 echo timestamp > $(srcdir)/src/stamp-h.in
343 src/Makefile: $(srcdir)/src/Makefile.in config.status
344 ./config.status
346 src/config.stamp: $(srcdir)/src/config.in config.status
347 ./config.status
348 touch src/config.stamp
350 lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status
351 ./config.status
353 doc/emacs/Makefile: $(srcdir)/doc/emacs/Makefile.in config.status
354 ./config.status
356 doc/misc/Makefile: $(srcdir)/doc/misc/Makefile.in config.status
357 ./config.status
359 doc/lispref/Makefile: $(srcdir)/doc/lispref/Makefile.in config.status
360 ./config.status
362 doc/lispintro/Makefile: $(srcdir)/doc/lispintro/Makefile.in config.status
363 ./config.status
365 oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status
366 ./config.status
368 lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status
369 ./config.status
371 leim/Makefile: $(srcdir)/leim/Makefile.in config.status
372 ./config.status
374 lisp/Makefile: $(srcdir)/lisp/Makefile.in config.status
375 ./config.status
377 # ==================== Installation ====================
379 ## If we let lib-src do its own installation, that means we
380 ## don't have to duplicate the list of utilities to install in
381 ## this Makefile as well.
383 ## On AIX, use tar xBf.
384 ## On Xenix, use tar xpf.
386 .PHONY: install mkdir
388 ## We delete each directory in ${COPYDESTS} before we copy into it;
389 ## that way, we can reinstall over directories that have been put in
390 ## place with their files read-only (perhaps because they are checked
391 ## into RCS). In order to make this safe, we make sure that the
392 ## source exists and is distinct from the destination.
393 ### We do install-arch-indep first because
394 ### the executable needs the Lisp files and DOC file to work properly.
395 install: all install-arch-indep install-arch-dep install-leim blessmail
396 @true
398 ### Install the executables that were compiled specifically for this machine.
399 ### It would be nice to do something for a parallel make
400 ### to ensure that install-arch-indep finishes before this starts.
401 install-arch-dep: mkdir
402 (cd lib-src; \
403 $(MAKE) install $(MFLAGS) prefix=${prefix} \
404 exec_prefix=${exec_prefix} bindir=${bindir} \
405 libexecdir=${libexecdir} archlibdir=${archlibdir} \
406 INSTALL_STRIP=${INSTALL_STRIP})
407 ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
408 -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
409 rm -f $(DESTDIR)${bindir}/$(EMACS)
410 -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
411 -unset CDPATH; \
412 for f in `cd lib-src && echo fns-*.el`; do \
413 if test -r lib-src/$$f ; then \
414 ${INSTALL_DATA} lib-src/$$f $(DESTDIR)${archlibdir}/$$f; \
415 else true; fi ; \
416 done
417 if test "${carbon_appdir}" != ""; then \
418 umask 022; mkdir -p $(DESTDIR)${carbon_appdir}/Emacs.app; \
419 (cd mac/Emacs.app; (tar -chf - . | \
420 (cd $(DESTDIR)${carbon_appdir}/Emacs.app; umask 022; tar -xvf - \
421 && cat > /dev/null))) || exit 1; \
424 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
425 ## Needs to be the user running install, so configure can't set it.
426 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
427 `id -un 2> /dev/null`; do \
428 [ -n "$${installuser}" ] && break ; \
429 done
431 ### Install the files that are machine-independent.
432 ### Most of them come straight from the distribution;
433 ### the exception is the DOC-* files, which are copied
434 ### from the build directory.
436 ## Note that we copy DOC* and then delete DOC
437 ## as a workaround for a bug in tar on Ultrix 4.2.
439 ## We install only the relevant DOC file if possible
440 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
442 ## If people complain about the h flag in tar command, take that out.
443 ## That flag is also used in leim/Makefile.in
445 ## Note that the Makefiles in the etc directory are potentially useful
446 ## in an installed Emacs, so should not be excluded.
448 install-arch-indep: mkdir info install-etc
449 -set ${COPYDESTS} ; \
450 unset CDPATH; \
451 for dir in ${COPYDIR} ; do \
452 if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
453 rm -rf $$1 ; \
454 fi ; \
455 shift ; \
456 done
457 -set ${COPYDESTS} ; \
458 mkdir ${COPYDESTS} ; \
459 chmod ugo+rx ${COPYDESTS} ; \
460 unset CDPATH; \
461 $(set_installuser); \
462 for dir in ${COPYDIR} ; do \
463 dest=$$1 ; shift ; \
464 [ -d $${dir} ] \
465 && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
466 && (echo "Copying $${dir} to $${dest}..." ; \
467 (cd $${dir}; tar -chf - . ) \
468 | (cd $${dest}; umask 022; \
469 tar -xvf - && cat > /dev/null) || exit 1; \
470 find $${dest} -exec chown $${installuser} {} ';' ;\
471 for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \
472 chmod a+rx $${subdir} ; \
473 rm -rf $${subdir}/RCS ; \
474 rm -rf $${subdir}/CVS ; \
475 rm -f $${subdir}/.cvsignore ; \
476 rm -f $${subdir}/.arch-inventory ; \
477 rm -f $${subdir}/\#* ; \
478 rm -f $${subdir}/.\#* ; \
479 rm -f $${subdir}/*~ ; \
480 rm -f $${subdir}/*.orig ; \
481 [ "$${dir}" != "${srcdir}/etc" ] && \
482 rm -f $${subdir}/[mM]akefile* ; \
483 rm -f $${subdir}/ChangeLog* ; \
484 rm -f $${subdir}/dired.todo ; \
485 done) ; \
486 done
487 -rm -f $(DESTDIR)${lispdir}/subdirs.el
488 $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
489 if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
490 then true; \
491 else \
492 (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
493 echo " (normal-top-level-add-subdirs-to-load-path))") \
494 > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
496 chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
497 -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
498 then true; \
499 else \
500 (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
501 echo " (normal-top-level-add-subdirs-to-load-path))") \
502 > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
504 -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
505 -unset CDPATH; \
506 if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
507 then \
508 fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
509 if [ -f "./etc/DOC-$${fullversion}" ]; \
510 then \
511 docfile="DOC-$${fullversion}"; \
512 else \
513 docfile="DOC-${version}*"; \
514 fi; \
515 echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
516 (cd ./etc; tar -chf - $${docfile}) \
517 |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
518 (cd $(DESTDIR)$(docdir); \
519 $(set_installuser); \
520 chown $${installuser} DOC*; chmod a+r DOC*; \
521 if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
522 else true; fi
523 -unset CDPATH; \
524 if [ -r ./lisp ] \
525 && [ -r ./lisp/simple.el ] \
526 && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \
527 && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
528 then \
529 echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \
530 (cd lisp; tar -chf - *.el *.elc) \
531 |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
532 (cd $(DESTDIR)${lispdir}; \
533 $(set_installuser); \
534 find . -exec chown $${installuser} {} ';') ; \
535 else true; fi
536 -unset CDPATH; \
537 if [ -n "${GZIP_PROG}" ]; \
538 then \
539 echo "Compressing *.el ..." ; \
540 (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
541 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
542 done) \
543 else true; fi
544 -unset CDPATH; \
545 thisdir=`/bin/pwd`; \
546 if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
547 then \
548 (cd $(DESTDIR)${infodir}; \
549 if [ -f dir ]; then true; \
550 else \
551 (cd $${thisdir}; \
552 ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
553 chmod a+r $(DESTDIR)${infodir}/dir); \
554 fi; \
555 cd ${srcdir}/info ; \
556 for elt in $(INFO_FILES); do \
557 test "$(MAKEINFO)" = "off" && ! test -e $$elt && continue; \
558 for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
559 ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \
560 chmod a+r $(DESTDIR)${infodir}/$$f; \
561 done; \
562 done); \
563 else true; fi
564 -unset CDPATH; \
565 thisdir=`/bin/pwd`; \
566 if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
567 then \
568 for elt in $(INFO_FILES); do \
569 test "$(MAKEINFO)" = "off" && ! test -e $$elt && continue; \
570 (cd $${thisdir}; \
571 ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
572 done; \
573 else true; fi
574 -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} $(DESTDIR)${datadir}/emacs/site-lisp ${COPYDESTS} $(DESTDIR)${infodir}
575 thisdir=`/bin/pwd`; \
576 cd ${mansrcdir}; \
577 for page in emacs emacsclient etags ctags ; do \
578 (cd $${thisdir}; \
579 ${INSTALL_DATA} ${mansrcdir}/$${page}.1 $(DESTDIR)${man1dir}/$${page}${manext}; \
580 chmod a+r $(DESTDIR)${man1dir}/$${page}${manext}); \
581 done
583 ## Install those items from etc/ that need to end up elsewhere.
584 install-etc: mkdir
585 ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
586 $(DESTDIR)${desktopdir}/emacs.desktop
587 for icon in $(iconsrcdir)/*/*/apps/*.* \
588 $(iconsrcdir)/*/*/mimetypes/*.*; do \
589 if [ -r $${icon} ]; then \
590 iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
591 ${INSTALL_DATA} $${icon} $${iicon} ; \
592 fi ; \
593 done
595 ### Install LEIM files. Although they are machine-independent, we
596 ### have separate target here instead of including it in
597 ### `install-arch-indep'. People who extracted LEIM files after they
598 ### insalled Emacs itself can install only LEIM files by this target.
599 install-leim: leim/Makefile mkdir
600 cd leim; $(MAKE) install
602 ### Build Emacs and install it, stripping binaries while installing them.
603 install-strip:
604 $(MAKE) INSTALL_STRIP=-s install
606 ### Build all the directories we're going to install Emacs in. Since
607 ### we may be creating several layers of directories (for example,
608 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
609 ### instead of mkdir. Not all systems' mkdir programs have the `-p' flag.
610 mkdir: FRC
611 if [ -d $(DESTDIR)${datadir} ]; then true; else \
612 $(srcdir)/mkinstalldirs $(DESTDIR)${datadir}; \
613 chmod a+r $(DESTDIR)${datadir};\
615 icondirs= ; \
616 for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \
617 if [ -d $${dir} ]; then \
618 icondirs="$${icondirs} $${dir}" ; \
619 fi ; \
620 done ; \
621 icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
622 $(srcdir)/mkinstalldirs ${COPYDESTS} $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
623 $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
624 $(DESTDIR)${datadir}/emacs/site-lisp \
625 $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
626 $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
627 $(DESTDIR)${desktopdir} $${icondirs}
629 ### Delete all the installed files that the `install' target would
630 ### create (but not the noninstalled files such as `make all' would
631 ### create).
633 ### Don't delete the lisp and etc directories if they're in the source tree.
634 uninstall:
635 (cd lib-src; \
636 $(MAKE) $(MFLAGS) uninstall \
637 prefix=${prefix} exec_prefix=${exec_prefix} \
638 bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
639 -unset CDPATH; \
640 for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \
641 if [ -d $${dir} ]; then \
642 case `(cd $${dir} ; /bin/pwd)` in \
643 `(cd ${srcdir} ; /bin/pwd)`* ) ;; \
644 * ) rm -rf $${dir} ;; \
645 esac ; \
646 case $${dir} in \
647 $(DESTDIR)${datadir}/emacs/${version}/* ) \
648 rm -rf $(DESTDIR)${datadir}/emacs/${version} \
649 ;; \
650 esac ; \
651 fi ; \
652 done
653 (cd $(DESTDIR)${archlibdir} && rm -f fns-*)
654 -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
655 (cd $(DESTDIR)${infodir} && \
656 for elt in $(INFO_FILES); do \
657 $(INSTALL_INFO) --remove --info-dir=. $$elt; \
658 for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
659 rm -f $$f; \
660 done; \
661 done;)
662 (cd $(DESTDIR)${man1dir} && rm -f emacs${manext} emacsclient${manext} etags${manext} ctags${manext})
663 (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS))
666 FRC:
668 # ==================== Cleaning up and miscellanea ====================
670 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
672 ### `mostlyclean'
673 ### Like `clean', but may refrain from deleting a few files that people
674 ### normally don't want to recompile. For example, the `mostlyclean'
675 ### target for GCC does not delete `libgcc.a', because recompiling it
676 ### is rarely necessary and takes a lot of time.
677 mostlyclean: FRC
678 (cd src; $(MAKE) $(MFLAGS) mostlyclean)
679 (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
680 (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
681 (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
682 -(cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean)
683 -(cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean)
684 -(cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean)
685 -(cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean)
686 (cd leim; $(MAKE) $(MFLAGS) mostlyclean)
688 ### `clean'
689 ### Delete all files from the current directory that are normally
690 ### created by building the program. Don't delete the files that
691 ### record the configuration. Also preserve files that could be made
692 ### by building, but normally aren't because the distribution comes
693 ### with them.
695 ### Delete `.dvi' files here if they are not part of the distribution.
696 clean: FRC
697 (cd src; $(MAKE) $(MFLAGS) clean)
698 (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
699 (cd lwlib; $(MAKE) $(MFLAGS) clean)
700 (cd lib-src; $(MAKE) $(MFLAGS) clean)
701 -(cd doc/emacs && $(MAKE) $(MFLAGS) clean)
702 -(cd doc/misc && $(MAKE) $(MFLAGS) clean)
703 -(cd doc/lispref && $(MAKE) $(MFLAGS) clean)
704 -(cd doc/lispintro && $(MAKE) $(MFLAGS) clean)
705 (cd leim; $(MAKE) $(MFLAGS) clean)
707 ### `distclean'
708 ### Delete all files from the current directory that are created by
709 ### configuring or building the program. If you have unpacked the
710 ### source and built the program without creating any other files,
711 ### `make distclean' should leave only the files that were in the
712 ### distribution.
713 top_distclean=\
714 rm -f config.status config.cache config.log ; \
715 rm -f Makefile ${SUBDIR_MAKEFILES} ; \
716 if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi
717 distclean: FRC
718 (cd src; $(MAKE) $(MFLAGS) distclean)
719 (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
720 (cd lwlib; $(MAKE) $(MFLAGS) distclean)
721 (cd lib-src; $(MAKE) $(MFLAGS) distclean)
722 (cd doc/emacs && $(MAKE) $(MFLAGS) distclean)
723 (cd doc/misc && $(MAKE) $(MFLAGS) distclean)
724 (cd doc/lispref && $(MAKE) $(MFLAGS) distclean)
725 (cd doc/lispintro && $(MAKE) $(MFLAGS) distclean)
726 (cd leim; $(MAKE) $(MFLAGS) distclean)
727 (cd lisp; $(MAKE) $(MFLAGS) distclean)
728 ${top_distclean}
730 ### `maintainer-clean'
731 ### Delete everything from the current directory that can be
732 ### reconstructed with this Makefile. This typically includes
733 ### everything deleted by distclean, plus more: C source files
734 ### produced by Bison, tags tables, info files, and so on.
736 ### One exception, however: `make maintainer-clean' should not delete
737 ### `configure' even if `configure' can be remade using a rule in the
738 ### Makefile. More generally, `make maintainer-clean' should not delete
739 ### anything that needs to exist in order to run `configure' and then
740 ### begin to build the program.
741 maintainer-clean: FRC
742 (cd src; $(MAKE) $(MFLAGS) maintainer-clean)
743 (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
744 (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
745 (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
746 -(cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean)
747 -(cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean)
748 -(cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean)
749 -(cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean)
750 (cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
751 (cd lisp; $(MAKE) $(MFLAGS) maintainer-clean)
752 ${top_distclean}
754 ### This doesn't actually appear in the coding standards, but Karl
755 ### says GCC supports it, and that's where the configuration part of
756 ### the coding standards seem to come from. It's like distclean, but
757 ### it deletes backup and autosave files too.
758 extraclean:
759 for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
760 ${top_distclean}
761 -rm -f config-tmp-*
762 -rm -f *~ \#*
764 # The src subdir knows how to do the right thing
765 # even when the build directory and source dir are different.
766 TAGS tags: lib-src src
767 cd src; $(MAKE) tags
769 check:
770 @echo "We don't have any tests for GNU Emacs yet."
772 dist:
773 cd ${srcdir}; ./make-dist
775 .PHONY: info dvi dist check html
777 info-real:
778 -(cd doc/emacs; $(MAKE) $(MFLAGS) info)
779 -(cd doc/misc; $(MAKE) $(MFLAGS) info)
780 -(cd doc/lispref; $(MAKE) $(MFLAGS) info)
781 -(cd doc/lispintro; $(MAKE) $(MFLAGS) info)
783 force-info:
784 # Note that man/Makefile knows how to
785 # put the info files in $(srcdir),
786 # so we can do ok running make in the build dir.
787 info: force-info
788 @if test "$(MAKEINFO)" = "off"; then \
789 echo "Configured --without-makeinfo, not building manuals" ; \
790 elif test "$(MAKEINFO)" = "no"; then \
791 echo "makeinfo is missing - cannot build manuals" ; \
792 exit 1 ; \
793 else \
794 $(MAKE) $(MFLAGS) info-real ; \
797 # The info/dir file must be updated by hand when new manuals are added.
798 check-info-dir: info
799 cd info ; \
800 missing= ; \
801 for file in *; do \
802 test -f "$${file}" || continue ; \
803 case $${file} in \
804 *-[0-9]*|COPYING|dir) continue ;; \
805 esac ; \
806 grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
807 done ; \
808 if test -n "$${missing}"; then \
809 echo "Missing info/dir entries: $${missing}" ; \
810 exit 1 ; \
811 fi ; \
812 echo "info/dir is OK"
814 dvi:
815 (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
816 (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
817 (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
818 (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
820 #### Bootstrapping.
822 ### This is meant for Emacs maintainers only. It first cleans the
823 ### lisp subdirectory, removing all compiled Lisp files. Then a
824 ### special emacs executable is built from Lisp sources, which is then
825 ### used to compile Lisp files. The last step is a "normal" make.
827 .PHONY: bootstrap
828 .PHONY: bootstrap-build
829 .PHONY: bootfast
830 .PHONY: maybe_bootstrap
832 maybe_bootstrap:
833 @bar="`echo $(srcdir)/lisp/*.elc`"; \
834 if [ \( "$$bar" = '$(srcdir)/lisp/*.elc' \) -o \( "$$bar" = '' \) ]; then \
835 echo "Your tree does not include the compiled Lisp files."; \
836 echo "You need to do \`make bootstrap' to build Emacs."; \
837 exit 1;\
840 bootstrap: bootstrap-clean-before FRC
841 $(MAKE) $(MFLAGS) info bootstrap-build
843 bootfast: bootstrap-clean-before-fast FRC
844 $(MAKE) $(MFLAGS) info bootstrap-build
846 bootstrap-build: FRC
847 (cd lisp; $(MAKE) $(MFLAGS) bootstrap-prepare)
848 (cd src; $(MAKE) $(MFLAGS) bootstrap)
849 (cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs${EXEEXT})
850 (cd src; $(MAKE) $(MFLAGS) mostlyclean)
851 $(MAKE) $(MFLAGS) all
852 (cd lisp; $(MAKE) $(MFLAGS) bootstrap-after)
854 ### Used for `bootstrap' to avoid deleting existing dumped Emacs executables.
855 bootstrap-clean-before: bootstrap-clean-before-fast FRC
856 (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean)
857 (cd leim; $(MAKE) $(MFLAGS) bootstrap-clean)
859 ### Used for `bootfast' to avoid deleting existing dumped Emacs executables
860 ### and compiled .elc files.
861 bootstrap-clean-before-fast: FRC
862 (cd src; $(MAKE) $(MFLAGS) mostlyclean)
863 (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
864 (cd lwlib; $(MAKE) $(MFLAGS) clean)
865 (cd lib-src; $(MAKE) $(MFLAGS) clean)
866 -(cd doc/emacs && $(MAKE) $(MFLAGS) clean)
867 -(cd doc/misc && $(MAKE) $(MFLAGS) clean)
868 -(cd doc/lispref && $(MAKE) $(MFLAGS) clean)
869 -(cd doc/lispintro && $(MAKE) $(MFLAGS) clean)
870 (cd leim; $(MAKE) $(MFLAGS) clean)
872 .PHONY: check-declare
874 check-declare:
875 @if [ ! -e $(srcdir)/src/emacs ]; then \
876 echo "You must build Emacs to use this command"; \
877 exit 1; \
879 (cd leim; $(MAKE) $(MFLAGS) $@)
880 (cd lisp; $(MAKE) $(MFLAGS) $@)