*** empty log message ***

[emacs.git] / src / process.c

/* Asynchronous subprocess control for GNU Emacs.
   Copyright (C) 1985, 1986, 1987, 1988, 1992 Free Software Foundation, Inc.

This file is part of GNU Emacs.

GNU Emacs is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 1, or (at your option)
any later version.

GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING.  If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */


#include <signal.h>

#include "config.h"

/* This file is split into two parts by the following preprocessor
   conditional.  The 'then' clause contains all of the support for
   asynchronous subprocesses.  The 'else' clause contains stub
   versions of some of the asynchronous subprocess routines that are
   often called elsewhere in Emacs, so we don't have to #ifdef the
   sections that call them.  */

\f
#ifdef subprocesses

#include <stdio.h>
#include <errno.h>
#include <setjmp.h>
#include <sys/types.h>          /* some typedefs are used in sys/file.h */
#include <sys/file.h>
#include <sys/stat.h>

#ifdef HAVE_SOCKETS     /* TCP connection support, if kernel can do it */
#include <sys/socket.h>
#include <netdb.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#endif /* HAVE_SOCKETS */

#if defined(BSD) || defined(STRIDE)
#include <sys/ioctl.h>
#if !defined (O_NDELAY) && defined (HAVE_PTYS)
#include <fcntl.h>
#endif /* HAVE_PTYS and no O_NDELAY */
#endif /* BSD or STRIDE */
#ifdef USG
#ifdef HAVE_TERMIOS
#include <termios.h>
#else
#include <termio.h>
#endif
#include <fcntl.h>
#endif /* USG */

#ifdef NEED_BSDTTY
#include <bsdtty.h>
#endif

#ifdef HPUX
#undef TIOCGPGRP
#endif

#ifdef IRIS
#include <sys/sysmacros.h>      /* for "minor" */
#endif /* not IRIS */

#include "systime.h"

#if defined (HPUX) && defined (HAVE_PTYS)
#include <sys/ptyio.h>
#endif

#ifdef AIX
#include <sys/pty.h>
#include <unistd.h>
#endif

#ifdef SYSV_PTYS
#include <sys/tty.h>
#ifdef titan
#include <sys/ttyhw.h>
#include <sys/stream.h>
#endif
#include <sys/pty.h>
#endif

#ifdef XENIX
#undef TIOCGETC  /* Avoid confusing some conditionals that test this.  */
#endif

#ifdef BROKEN_TIOCGETC
#undef TIOCGETC
#endif

#include "lisp.h"
#include "window.h"
#include "buffer.h"
#include "process.h"
#include "termhooks.h"
#include "termopts.h"
#include "commands.h"

extern int screen_garbaged;

Lisp_Object Qrun, Qstop, Qsignal, Qopen, Qclosed;
/* Qexit is declared and initialized in eval.c.  */

/* a process object is a network connection when its childp field is neither
   Qt nor Qnil but is instead a string (name of foreign host we
   are connected to + name of port we are connected to) */

#ifdef HAVE_SOCKETS
static Lisp_Object stream_process;

#define NETCONN_P(p) (XGCTYPE (XPROCESS (p)->childp) == Lisp_String)
#else
#define NETCONN_P(p) 0
#endif /* HAVE_SOCKETS */

/* Define first descriptor number available for subprocesses.  */
#ifdef VMS
#define FIRST_PROC_DESC 1
#else /* Not VMS */
#define FIRST_PROC_DESC 3
#endif

/* Define SIGCHLD as an alias for SIGCLD.  There are many conditionals
   testing SIGCHLD.  */

#if !defined (SIGCHLD) && defined (SIGCLD)
#define SIGCHLD SIGCLD
#endif /* SIGCLD */

#include "syssignal.h"

/* Define the structure that the wait system call stores.
   On many systems, there is a structure defined for this.
   But on vanilla-ish USG systems there is not.  */

#ifndef VMS
#ifndef WAITTYPE
#if !defined (BSD) && !defined (UNIPLUS) && !defined (STRIDE) && !(defined (HPUX) && !defined (NOMULTIPLEJOBS)) && !defined (HAVE_WAIT_HEADER)
mis;tak-+;;:
#define WAITTYPE int
#define WIFSTOPPED(w) ((w&0377) == 0177)
#define WIFSIGNALED(w) ((w&0377) != 0177 && (w&~0377) == 0)
#define WIFEXITED(w) ((w&0377) == 0)
#define WRETCODE(w) (w >> 8)
#define WSTOPSIG(w) (w >> 8)
#define WCOREDUMP(w) ((w&0200) != 0)
#define WTERMSIG(w) (w & 0377)
#else 
#ifdef BSD4_1
#include <wait.h>
#else
#include <sys/wait.h>
#endif /* not BSD 4.1 */

#define WAITTYPE union wait
#define WRETCODE(w) w.w_retcode
#define WCOREDUMP(w) w.w_coredump

#ifdef HPUX
/* HPUX version 7 has broken definitions of these.  */
#undef WTERMSIG
#undef WSTOPSIG
#undef WIFSTOPPED
#undef WIFSIGNALED
#undef WIFEXITED
#endif

#ifndef WTERMSIG
#define WTERMSIG(w) w.w_termsig
#endif
#ifndef WSTOPSIG
#define WSTOPSIG(w) w.w_stopsig
#endif
#ifndef WIFSTOPPED
#define WIFSTOPPED(w) (WTERMSIG (w) == 0177)
#endif
#ifndef WIFSIGNALED
#define WIFSIGNALED(w) (WTERMSIG (w) != 0177 && (WSTOPSIG (w)) == 0)
#endif
#ifndef WIFEXITED
#define WIFEXITED(w) (WTERMSIG (w) == 0)
#endif
#endif /* BSD or UNIPLUS or STRIDE */
#endif /* no WAITTYPE */
#else /* VMS */

/* For the CMU PTY driver + */
#define DCL_PROMPT "$ "

#include <ssdef.h>
#include <iodef.h>
#include <clidef.h>
#include "vmsproc.h"
#endif /* VMS */

extern errno;
extern sys_nerr;
extern char *sys_errlist[];

#ifndef VMS
#ifndef BSD4_1
extern char *sys_siglist[];
#else
char *sys_siglist[] =
  {
    "bum signal!!",
    "hangup",
    "interrupt",
    "quit",
    "illegal instruction",
    "trace trap",
    "iot instruction",
    "emt instruction",
    "floating point exception",
    "kill",
    "bus error",
    "segmentation violation",
    "bad argument to system call",
    "write on a pipe with no one to read it",
    "alarm clock",
    "software termination signal from kill",
    "status signal",
    "sendable stop signal not from tty",
    "stop signal from tty",
    "continue a stopped process",
    "child status has changed",
    "background read attempted from control tty",
    "background write attempted from control tty",
    "input record available at control tty",
    "exceeded CPU time limit",
    "exceeded file size limit"
    };
#endif
#endif /* VMS */

#ifdef vipc

#include "vipc.h"
extern int comm_server;
extern int net_listen_address;
#endif /* vipc */

/* t means use pty, nil means use a pipe,
   maybe other values to come.  */
Lisp_Object Vprocess_connection_type;

#ifdef SKTPAIR
#ifndef HAVE_SOCKETS
#include <sys/socket.h>
#endif
#endif /* SKTPAIR */

/* Number of events of change of status of a process.  */
int process_tick;

/* Number of events for which the user or sentinel has been notified.  */
int update_tick;

#ifdef FD_SET
/* We could get this from param.h, but better not to depend on finding that.
   And better not to risk that it might define other symbols used in this
   file.  */
#define MAXDESC 64
#define SELECT_TYPE fd_set
#else /* no FD_SET */
#define MAXDESC 32
#define SELECT_TYPE int

/* Define the macros to access a single-int bitmap of descriptors.  */
#define FD_SET(n, p) (*(p) |= (1 << (n)))
#define FD_CLR(n, p) (*(p) &= ~(1 << (n)))
#define FD_ISSET(n, p) (*(p) & (1 << (n)))
#define FD_ZERO(p) (*(p) = 0)
#endif /* no FD_SET */

/* Mask of bits indicating the descriptors that we wait for input on */

SELECT_TYPE input_wait_mask;

int delete_exited_processes;

/* Indexed by descriptor, gives the process (if any) for that descriptor */
Lisp_Object chan_process[MAXDESC];

/* Alist of elements (NAME . PROCESS) */
Lisp_Object Vprocess_alist;

Lisp_Object Qprocessp;

Lisp_Object get_process ();

/* Buffered-ahead input char from process, indexed by channel.
   -1 means empty (no char is buffered).
   Used on sys V where the only way to tell if there is any
   output from the process is to read at least one char.
   Always -1 on systems that support FIONREAD.  */

int proc_buffered_char[MAXDESC];
\f
/* Compute the Lisp form of the process status, p->status, from
   the numeric status that was returned by `wait'.  */

update_status (p)
     struct Lisp_Process *p;
{
  union { int i; WAITTYPE wt; } u;
  u.i = XFASTINT (p->raw_status_low) + (XFASTINT (p->raw_status_high) << 16);
  p->status = status_convert (u.wt);
  p->raw_status_low = Qnil;
  p->raw_status_high = Qnil;
}

/*  Convert a process status work in Unix format to 
    the list that we use internally.  */

Lisp_Object
status_convert (w)
     WAITTYPE w;
{
  if (WIFSTOPPED (w))
    return Fcons (Qstop, Fcons (make_number (WSTOPSIG (w)), Qnil));
  else if (WIFEXITED (w))
    return Fcons (Qexit, Fcons (make_number (WRETCODE (w)),
                                WCOREDUMP (w) ? Qt : Qnil));
  else if (WIFSIGNALED (w))
    return Fcons (Qsignal, Fcons (make_number (WTERMSIG (w)),
                                  WCOREDUMP (w) ? Qt : Qnil));
  else
    return Qrun;
}

/* Given a status-list, extract the three pieces of information
   and store them individually through the three pointers.  */

void
decode_status (l, symbol, code, coredump)
     Lisp_Object l;
     Lisp_Object *symbol;
     int *code;
     int *coredump;
{
  Lisp_Object tem;

  if (XTYPE (l) == Lisp_Symbol)
    {
      *symbol = l;
      *code = 0;
      *coredump = 0;
    }
  else
    {
      *symbol = XCONS (l)->car;
      tem = XCONS (l)->cdr;
      *code = XFASTINT (XCONS (tem)->car);
      tem = XFASTINT (XCONS (tem)->cdr);
      *coredump = !NILP (tem);
    }
}

/* Return a string describing a process status list.  */

Lisp_Object 
status_message (status)
     Lisp_Object status;
{
  Lisp_Object symbol;
  int code, coredump;
  Lisp_Object string, string2;

  decode_status (status, &symbol, &code, &coredump);

  if (EQ (symbol, Qsignal) || EQ (symbol, Qstop))
    {
      string = build_string (code < NSIG ? sys_siglist[code] : "unknown");
      string2 = build_string (coredump ? " (core dumped)\n" : "\n");
      XSTRING (string)->data[0] = DOWNCASE (XSTRING (string)->data[0]);
      return concat2 (string, string2);
    }
  else if (EQ (symbol, Qexit))
    {
      if (code == 0)
        return build_string ("finished\n");
      string = Fint_to_string (make_number (code));
      string2 = build_string (coredump ? " (core dumped)\n" : "\n");
      return concat2 (build_string ("exited abnormally with code "),
                      concat2 (string, string2));
    }
  else
    return Fcopy_sequence (Fsymbol_name (symbol));
}
\f
#ifdef HAVE_PTYS
static pty_process;

/* Open an available pty, returning a file descriptor.
   Return -1 on failure.
   The file name of the terminal corresponding to the pty
   is left in the variable pty_name.  */

char pty_name[24];

int
allocate_pty ()
{
  struct stat stb;
  register c, i;
  int fd;

#ifdef PTY_ITERATION
  PTY_ITERATION
#else
  for (c = FIRST_PTY_LETTER; c <= 'z'; c++)
    for (i = 0; i < 16; i++)
#endif
      {
#ifdef PTY_NAME_SPRINTF
        PTY_NAME_SPRINTF
#else
#ifdef HPUX
        sprintf (pty_name, "/dev/ptym/pty%c%x", c, i);
#else
#ifdef RTU
        sprintf (pty_name, "/dev/pty%x", i);
#else
        sprintf (pty_name, "/dev/pty%c%x", c, i);
#endif /* not RTU */
#endif /* not HPUX */
#endif /* no PTY_NAME_SPRINTF */

#ifndef IRIS
        if (stat (pty_name, &stb) < 0)
          return -1;
#ifdef O_NONBLOCK
        fd = open (pty_name, O_RDWR | O_NONBLOCK, 0);
#else
        fd = open (pty_name, O_RDWR | O_NDELAY, 0);
#endif
#else /* Unusual IRIS code */
        *ptyv = open ("/dev/ptc", O_RDWR | O_NDELAY, 0);
        if (fd < 0)
          return -1;
        if (fstat (fd, &stb) < 0)
          return -1;
#endif /* IRIS */

        if (fd >= 0)
          {
            /* check to make certain that both sides are available
               this avoids a nasty yet stupid bug in rlogins */
#ifdef PTY_TTY_NAME_SPRINTF
            PTY_TTY_NAME_SPRINTF
#else
            /* TODO: In version 19, make these special cases use the macro above.  */
#ifdef HPUX
            sprintf (pty_name, "/dev/pty/tty%c%x", c, i);
#else
#ifdef RTU
            sprintf (pty_name, "/dev/ttyp%x", i);
#else
#ifdef IRIS
            sprintf (pty_name, "/dev/ttyq%d", minor (stb.st_rdev));
#else
            sprintf (pty_name, "/dev/tty%c%x", c, i);
#endif /* not IRIS */
#endif /* not RTU */
#endif /* not HPUX */
#endif /* no PTY_TTY_NAME_SPRINTF */
#ifndef UNIPLUS
            if (access (pty_name, 6) != 0)
              {
                close (fd);
#ifndef IRIS
                continue;
#else
                return -1;
#endif /* IRIS */
              }
#endif /* not UNIPLUS */
            setup_pty (fd);
            return fd;
          }
      }
  return -1;
}
#endif /* HAVE_PTYS */
\f
Lisp_Object
make_process (name)
     Lisp_Object name;
{
  register Lisp_Object val, tem, name1;
  register struct Lisp_Process *p;
  char suffix[10];
  register int i;

  /* size of process structure includes the vector header,
     so deduct for that.  But struct Lisp_Vector includes the first
     element, thus deducts too much, so add it back.  */
  val = Fmake_vector (make_number ((sizeof (struct Lisp_Process)
                                    - sizeof (struct Lisp_Vector)
                                    + sizeof (Lisp_Object))
                                   / sizeof (Lisp_Object)),
                      Qnil);
  XSETTYPE (val, Lisp_Process);

  p = XPROCESS (val);
  XFASTINT (p->infd) = 0;
  XFASTINT (p->outfd) = 0;
  XFASTINT (p->pid) = 0;
  XFASTINT (p->tick) = 0;
  XFASTINT (p->update_tick) = 0;
  p->raw_status_low = Qnil;
  p->raw_status_high = Qnil;
  p->status = Qrun;
  p->mark = Fmake_marker ();

  /* If name is already in use, modify it until it is unused.  */

  name1 = name;
  for (i = 1; ; i++)
    {
      tem = Fget_process (name1);
      if (NILP (tem)) break;
      sprintf (suffix, "<%d>", i);
      name1 = concat2 (name, build_string (suffix));
    }
  name = name1;
  p->name = name;
  Vprocess_alist = Fcons (Fcons (name, val), Vprocess_alist);
  return val;
}

remove_process (proc)
     register Lisp_Object proc;
{
  register Lisp_Object pair;

  pair = Frassq (proc, Vprocess_alist);
  Vprocess_alist = Fdelq (pair, Vprocess_alist);
  Fset_marker (XPROCESS (proc)->mark, Qnil, Qnil);

  deactivate_process (proc);
}
\f
DEFUN ("processp", Fprocessp, Sprocessp, 1, 1, 0,
  "Return t if OBJECT is a process.")
  (obj)
     Lisp_Object obj;
{
  return XTYPE (obj) == Lisp_Process ? Qt : Qnil;
}

DEFUN ("get-process", Fget_process, Sget_process, 1, 1, 0,
  "Return the process named NAME, or nil if there is none.")
  (name)
     register Lisp_Object name;
{
  if (XTYPE (name) == Lisp_Process)
    return name;
  CHECK_STRING (name, 0);
  return Fcdr (Fassoc (name, Vprocess_alist));
}

DEFUN ("get-buffer-process", Fget_buffer_process, Sget_buffer_process, 1, 1, 0,
  "Return the (or, a) process associated with BUFFER.\n\
BUFFER may be a buffer or the name of one.")
  (name)
     register Lisp_Object name;
{
  register Lisp_Object buf, tail, proc;

  if (NILP (name)) return Qnil;
  buf = Fget_buffer (name);
  if (NILP (buf)) return Qnil;

  for (tail = Vprocess_alist; !NILP (tail); tail = Fcdr (tail))
    {
      proc = Fcdr (Fcar (tail));
      if (XTYPE (proc) == Lisp_Process && EQ (XPROCESS (proc)->buffer, buf))
        return proc;
    }
  return Qnil;
}

/* This is how commands for the user decode process arguments */

Lisp_Object
get_process (name)
     register Lisp_Object name;
{
  register Lisp_Object proc;
  if (NILP (name))
    proc = Fget_buffer_process (Fcurrent_buffer ());
  else
    {
      proc = Fget_process (name);
      if (NILP (proc))
        proc = Fget_buffer_process (Fget_buffer (name));
    }

  if (!NILP (proc))
    return proc;

  if (NILP (name))
    error ("Current buffer has no process");
  else
    error ("Process %s does not exist", XSTRING (name)->data);
  /* NOTREACHED */
}

DEFUN ("delete-process", Fdelete_process, Sdelete_process, 1, 1, 0,
  "Delete PROCESS: kill it and forget about it immediately.\n\
PROCESS may be a process or the name of one, or a buffer name.")
  (proc)
     register Lisp_Object proc;
{
  proc = get_process (proc);
  XPROCESS (proc)->raw_status_low = Qnil;
  XPROCESS (proc)->raw_status_high = Qnil;
  if (NETCONN_P (proc))
    {
      XPROCESS (proc)->status = Fcons (Qexit, Fcons (make_number (0), Qnil));
      XSETINT (XPROCESS (proc)->tick, ++process_tick);
    }
  else if (XFASTINT (XPROCESS (proc)->infd))
    {
      Fkill_process (proc, Qnil);
      /* Do this now, since remove_process will make sigchld_handler do nothing.  */
      XPROCESS (proc)->status 
        = Fcons (Qsignal, Fcons (make_number (SIGKILL), Qnil));
      XSETINT (XPROCESS (proc)->tick, ++process_tick);
      status_notify ();
    }
  remove_process (proc);
  return Qnil;
}
\f
DEFUN ("process-status", Fprocess_status, Sprocess_status, 1, 1, 0,
  "Return the status of PROCESS: a symbol, one of these:\n\
run  -- for a process that is running.\n\
stop -- for a process stopped but continuable.\n\
exit -- for a process that has exited.\n\
signal -- for a process that has got a fatal signal.\n\
open -- for a network stream connection that is open.\n\
closed -- for a network stream connection that is closed.\n\
nil -- if arg is a process name and no such process exists.")
/* command -- for a command channel opened to Emacs by another process.\n\
   external -- for an i/o channel opened to Emacs by another process.\n\  */
  (proc)
     register Lisp_Object proc;
{
  register struct Lisp_Process *p;
  register Lisp_Object status;
  proc = Fget_process (proc);
  if (NILP (proc))
    return proc;
  p = XPROCESS (proc);
  if (!NILP (p->raw_status_low))
    update_status (p);
  status = p->status;
  if (XTYPE (status) == Lisp_Cons)
    status = XCONS (status)->car;
  if (NETCONN_P (proc))
    {
      if (EQ (status, Qrun))
        status = Qopen;
      else if (EQ (status, Qexit))
        status = Qclosed;
    }
  return status;
}

DEFUN ("process-exit-status", Fprocess_exit_status, Sprocess_exit_status,
       1, 1, 0,
  "Return the exit status of PROCESS or the signal number that killed it.\n\
If PROCESS has not yet exited or died, return 0.")
  (proc)
     register Lisp_Object proc;
{
  CHECK_PROCESS (proc, 0);
  if (!NILP (XPROCESS (proc)->raw_status_low))
    update_status (XPROCESS (proc));
  if (XTYPE (XPROCESS (proc)->status) == Lisp_Cons)
    return XCONS (XCONS (XPROCESS (proc)->status)->cdr)->car;
  return make_number (0);
}

DEFUN ("process-id", Fprocess_id, Sprocess_id, 1, 1, 0,
  "Return the process id of PROCESS.\n\
This is the pid of the Unix process which PROCESS uses or talks to.\n\
For a network connection, this value is nil.")
  (proc)
     register Lisp_Object proc;
{
  CHECK_PROCESS (proc, 0);
  return XPROCESS (proc)->pid;
}

DEFUN ("process-name", Fprocess_name, Sprocess_name, 1, 1, 0,
  "Return the name of PROCESS, as a string.\n\
This is the name of the program invoked in PROCESS,\n\
possibly modified to make it unique among process names.")
  (proc)
     register Lisp_Object proc;
{
  CHECK_PROCESS (proc, 0);
  return XPROCESS (proc)->name;
}

DEFUN ("process-command", Fprocess_command, Sprocess_command, 1, 1, 0,
  "Return the command that was executed to start PROCESS.\n\
This is a list of strings, the first string being the program executed\n\
and the rest of the strings being the arguments given to it.\n\
For a non-child channel, this is nil.")
  (proc)
     register Lisp_Object proc;
{
  CHECK_PROCESS (proc, 0);
  return XPROCESS (proc)->command;
}

DEFUN ("set-process-buffer", Fset_process_buffer, Sset_process_buffer,
  2, 2, 0,
  "Set buffer associated with PROCESS to BUFFER (a buffer, or nil).")
  (proc, buffer)
     register Lisp_Object proc, buffer;
{
  CHECK_PROCESS (proc, 0);
  if (!NILP (buffer))
    CHECK_BUFFER (buffer, 1);
  XPROCESS (proc)->buffer = buffer;
  return buffer;
}

DEFUN ("process-buffer", Fprocess_buffer, Sprocess_buffer,
  1, 1, 0,
  "Return the buffer PROCESS is associated with.\n\
Output from PROCESS is inserted in this buffer\n\
unless PROCESS has a filter.")
  (proc)
     register Lisp_Object proc;
{
  CHECK_PROCESS (proc, 0);
  return XPROCESS (proc)->buffer;
}

DEFUN ("process-mark", Fprocess_mark, Sprocess_mark,
  1, 1, 0,
  "Return the marker for the end of the last output from PROCESS.")
  (proc)
     register Lisp_Object proc;
{
  CHECK_PROCESS (proc, 0);
  return XPROCESS (proc)->mark;
}

DEFUN ("set-process-filter", Fset_process_filter, Sset_process_filter,
  2, 2, 0,
  "Give PROCESS the filter function FILTER; nil means no filter.\n\
When a process has a filter, each time it does output\n\
the entire string of output is passed to the filter.\n\
The filter gets two arguments: the process and the string of output.\n\
If the process has a filter, its buffer is not used for output.")
  (proc, filter)
     register Lisp_Object proc, filter;
{
  CHECK_PROCESS (proc, 0);
  XPROCESS (proc)->filter = filter;
  return filter;
}

DEFUN ("process-filter", Fprocess_filter, Sprocess_filter,
  1, 1, 0,
  "Returns the filter function of PROCESS; nil if none.\n\
See `set-process-filter' for more info on filter functions.")
  (proc)
     register Lisp_Object proc;
{
  CHECK_PROCESS (proc, 0);
  return XPROCESS (proc)->filter;
}

DEFUN ("set-process-sentinel", Fset_process_sentinel, Sset_process_sentinel,
  2, 2, 0,
  "Give PROCESS the sentinel SENTINEL; nil for none.\n\
The sentinel is called as a function when the process changes state.\n\
It gets two arguments: the process, and a string describing the change.")
  (proc, sentinel)
     register Lisp_Object proc, sentinel;
{
  CHECK_PROCESS (proc, 0);
  XPROCESS (proc)->sentinel = sentinel;
  return sentinel;
}

DEFUN ("process-sentinel", Fprocess_sentinel, Sprocess_sentinel,
  1, 1, 0,
  "Return the sentinel of PROCESS; nil if none.\n\
See `set-process-sentinel' for more info on sentinels.")
  (proc)
     register Lisp_Object proc;
{
  CHECK_PROCESS (proc, 0);
  return XPROCESS (proc)->sentinel;
}

DEFUN ("process-kill-without-query", Fprocess_kill_without_query,
  Sprocess_kill_without_query, 1, 2, 0,
  "Say no query needed if PROCESS is running when Emacs is exited.\n\
Optional second argument if non-nill says to require a query.\n\
Value is t if a query was formerly required.")
  (proc, value)
     register Lisp_Object proc, value;
{
  Lisp_Object tem;

  CHECK_PROCESS (proc, 0);
  tem = XPROCESS (proc)->kill_without_query;
  XPROCESS (proc)->kill_without_query = Fnull (value);

  return Fnull (tem);
}
\f
Lisp_Object
list_processes_1 ()
{
  register Lisp_Object tail, tem;
  Lisp_Object proc, minspace, tem1;
  register struct buffer *old = current_buffer;
  register struct Lisp_Process *p;
  register int state;
  char tembuf[80];

  XFASTINT (minspace) = 1;

  set_buffer_internal (XBUFFER (Vstandard_output));
  Fbuffer_disable_undo (Vstandard_output);

  current_buffer->truncate_lines = Qt;

  write_string ("\
Proc         Status   Buffer         Command\n\
----         ------   ------         -------\n", -1);

  for (tail = Vprocess_alist; !NILP (tail); tail = Fcdr (tail))
    {
      Lisp_Object symbol;

      proc = Fcdr (Fcar (tail));
      p = XPROCESS (proc);
      if (NILP (p->childp))
        continue;

      Finsert (1, &p->name);
      Findent_to (make_number (13), minspace);

      if (!NILP (p->raw_status_low))
        update_status (p);
      symbol = p->status;
      if (XTYPE (p->status) == Lisp_Cons)
        symbol = XCONS (p->status)->car;

      
      if (EQ (symbol, Qsignal))
        {
          Lisp_Object tem;
          tem = Fcar (Fcdr (p->status));
#ifdef VMS
          if (XINT (tem) < NSIG)
            write_string (sys_siglist [XINT (tem)], -1);
          else
#endif
            Fprinc (symbol, Qnil);
        }
      else if (NETCONN_P (proc))
        {
          if (EQ (symbol, Qrun))
            write_string ("open", -1);
          else if (EQ (symbol, Qexit))
            write_string ("closed", -1);
          else
            Fprinc (symbol, Qnil);
        }
      else
        Fprinc (symbol, Qnil);

      if (EQ (symbol, Qexit))
        {
          Lisp_Object tem;
          tem = Fcar (Fcdr (p->status));
          if (XFASTINT (tem))
            {
              sprintf (tembuf, " %d", XFASTINT (tem));
              write_string (tembuf, -1);
            }
        }

      if (EQ (symbol, Qsignal) || EQ (symbol, Qexit))
        remove_process (proc);

      Findent_to (make_number (22), minspace);
      if (NILP (p->buffer))
        insert_string ("(none)");
      else if (NILP (XBUFFER (p->buffer)->name))
        insert_string ("(Killed)");
      else
        Finsert (1, &XBUFFER (p->buffer)->name);

      Findent_to (make_number (37), minspace);

      if (NETCONN_P (proc))
        {
          sprintf (tembuf, "(network stream connection to %s)\n",
                   XSTRING (p->childp)->data);
          insert_string (tembuf);
        }
      else 
        {
          tem = p->command;
          while (1)
            {
              tem1 = Fcar (tem);
              Finsert (1, &tem1);
              tem = Fcdr (tem);
              if (NILP (tem))
                break;
              insert_string (" ");
            }
          insert_string ("\n");
       }
    }
  return Qnil;
}

DEFUN ("list-processes", Flist_processes, Slist_processes, 0, 0, "",
  "Display a list of all processes.\n\
\(Any processes listed as Exited or Signaled are actually eliminated\n\
after the listing is made.)")
  ()
{
  internal_with_output_to_temp_buffer ("*Process List*",
                                       list_processes_1, Qnil);
  return Qnil;
}

DEFUN ("process-list", Fprocess_list, Sprocess_list, 0, 0, 0,
  "Return a list of all processes.")
  ()
{
  return Fmapcar (Qcdr, Vprocess_alist);
}
\f
DEFUN ("start-process", Fstart_process, Sstart_process, 3, MANY, 0,
  "Start a program in a subprocess.  Return the process object for it.\n\
Args are NAME BUFFER PROGRAM &rest PROGRAM-ARGS\n\
NAME is name for process.  It is modified if necessary to make it unique.\n\
BUFFER is the buffer or (buffer-name) to associate with the process.\n\
 Process output goes at end of that buffer, unless you specify\n\
 an output stream or filter function to handle the output.\n\
 BUFFER may be also nil, meaning that this process is not associated\n\
 with any buffer\n\
Third arg is program file name.  It is searched for as in the shell.\n\
Remaining arguments are strings to give program as arguments.")
  (nargs, args)
     int nargs;
     register Lisp_Object *args;
{
  Lisp_Object buffer, name, program, proc, tem;
#ifdef VMS
  register unsigned char *new_argv;
  int len;
#else
  register unsigned char **new_argv;
#endif
  register int i;

  buffer = args[1];
  if (!NILP (buffer))
    buffer = Fget_buffer_create (buffer);

  name = args[0];
  CHECK_STRING (name, 0);

  program = args[2];

  CHECK_STRING (program, 2);

#ifdef VMS
  /* Make a one member argv with all args concatenated
     together separated by a blank.  */
  len = XSTRING (program)->size + 2;
  for (i = 3; i < nargs; i++)
    {
      tem = args[i];
      CHECK_STRING (tem, i);
      len += XSTRING (tem)->size + 1;   /* count the blank */
    }
  new_argv = (unsigned char *) alloca (len);
  strcpy (new_argv, XSTRING (program)->data);
  for (i = 3; i < nargs; i++)
    {
      tem = args[i];
      CHECK_STRING (tem, i);
      strcat (new_argv, " ");
      strcat (new_argv, XSTRING (tem)->data);
    }
#else /* not VMS */
  new_argv = (unsigned char **) alloca ((nargs - 1) * sizeof (char *));

  for (i = 3; i < nargs; i++)
    {
      tem = args[i];
      CHECK_STRING (tem, i);
      new_argv[i - 2] = XSTRING (tem)->data;
    }
  new_argv[i - 2] = 0;
  new_argv[0] = XSTRING (program)->data;

  /* If program file name is not absolute, search our path for it */
  if (new_argv[0][0] != '/')
    {
      tem = Qnil;
      openp (Vexec_path, program, "", &tem, 1);
      if (NILP (tem))
        report_file_error ("Searching for program", Fcons (program, Qnil));
      new_argv[0] = XSTRING (tem)->data;
    }
#endif /* not VMS */

  proc = make_process (name);

  XPROCESS (proc)->childp = Qt;
  XPROCESS (proc)->command_channel_p = Qnil;
  XPROCESS (proc)->buffer = buffer;
  XPROCESS (proc)->sentinel = Qnil;
  XPROCESS (proc)->filter = Qnil;
  XPROCESS (proc)->command = Flist (nargs - 2, args + 2);

  create_process (proc, new_argv);

  return proc;
}

SIGTYPE
create_process_1 (signo)
     int signo;
{
#ifdef USG
  /* USG systems forget handlers when they are used;
     must reestablish each time */
  signal (signo, create_process_1);
#endif /* USG */
}

#if 0  /* This doesn't work; see the note before sigchld_handler.  */
#ifdef USG
#ifdef SIGCHLD
/* Mimic blocking of signals on system V, which doesn't really have it.  */

/* Nonzero means we got a SIGCHLD when it was supposed to be blocked.  */
int sigchld_deferred;

SIGTYPE
create_process_sigchld ()
{
  signal (SIGCHLD, create_process_sigchld);

  sigchld_deferred = 1;
}
#endif
#endif
#endif

#ifndef VMS /* VMS version of this function is in vmsproc.c.  */
create_process (process, new_argv)
     Lisp_Object process;
     char **new_argv;
{
  int pid, inchannel, outchannel, forkin, forkout;
  int sv[2];
#ifdef SIGCHLD
  SIGTYPE (*sigchld)();
#endif
  int pty_flag = 0;
  Lisp_Object current_dir;
  char **env;
  extern char **environ;

  env = environ;

  inchannel = outchannel = -1;

#ifdef HAVE_PTYS
  if (EQ (Vprocess_connection_type, Qt))
    outchannel = inchannel = allocate_pty ();

  /* Make sure that the child will be able to chdir to the current
     buffer's current directory.  We can't just have the child check
     for an error when it does the chdir, since it's in a vfork.  */
  current_dir = expand_and_dir_to_file (current_buffer->directory, Qnil);
  if (NILP (Ffile_accessible_directory_p (current_dir)))
    report_file_error ("Setting current directory",
                       Fcons (current_buffer->directory, Qnil));

  if (inchannel >= 0)
    {
#ifndef USG 
      /* On USG systems it does not work to open the pty's tty here
               and then close and reopen it in the child.  */
#ifdef O_NOCTTY
      /* Don't let this terminal become our controlling terminal
         (in case we don't have one).  */
      forkout = forkin = open (pty_name, O_RDWR | O_NOCTTY, 0);
#else
      forkout = forkin = open (pty_name, O_RDWR, 0);
#endif
      if (forkin < 0)
        report_file_error ("Opening pty", Qnil);
#else
      forkin = forkout = -1;
#endif /* not USG */
      pty_flag = 1;
    }
  else
#endif /* HAVE_PTYS */
#ifdef SKTPAIR
    {
      if (socketpair (AF_UNIX, SOCK_STREAM, 0, sv) < 0)
        report_file_error ("Opening socketpair", Qnil);
      outchannel = inchannel = sv[0];
      forkout = forkin = sv[1];
    }
#else /* not SKTPAIR */
    {
      pipe (sv);
      inchannel = sv[0];
      forkout = sv[1];
      pipe (sv);
      outchannel = sv[1];
      forkin = sv[0];
    }
#endif /* not SKTPAIR */

#if 0
  /* Replaced by close_process_descs */
  set_exclusive_use (inchannel);
  set_exclusive_use (outchannel);
#endif

/* Stride people say it's a mystery why this is needed
   as well as the O_NDELAY, but that it fails without this.  */
#if defined (STRIDE) || (defined (pfa) && defined (HAVE_PTYS))
  {
    int one = 1;
    ioctl (inchannel, FIONBIO, &one);
  }
#endif

#ifdef O_NONBLOCK
  fcntl (inchannel, F_SETFL, O_NONBLOCK);
#else
#ifdef O_NDELAY
  fcntl (inchannel, F_SETFL, O_NDELAY);
#endif
#endif

  /* Record this as an active process, with its channels.
     As a result, child_setup will close Emacs's side of the pipes.  */
  chan_process[inchannel] = process;
  XFASTINT (XPROCESS (process)->infd) = inchannel;
  XFASTINT (XPROCESS (process)->outfd) = outchannel;
  /* Record the tty descriptor used in the subprocess.  */
  if (forkin < 0)
    XPROCESS (process)->subtty = Qnil;
  else
    XFASTINT (XPROCESS (process)->subtty) = forkin;
  XPROCESS (process)->pty_flag = (pty_flag ? Qt : Qnil);
  XPROCESS (process)->status = Qrun;

  /* Delay interrupts until we have a chance to store
     the new fork's pid in its process structure */
#ifdef SIGCHLD
#ifdef BSD4_1
  sighold (SIGCHLD);
#else /* not BSD4_1 */
#if defined (BSD) || defined (UNIPLUS) || defined (HPUX)
  sigsetmask (sigmask (SIGCHLD));
#else /* ordinary USG */
#if 0
  sigchld_deferred = 0;
  sigchld = signal (SIGCHLD, create_process_sigchld);
#endif
#endif /* ordinary USG */
#endif /* not BSD4_1 */
#endif /* SIGCHLD */

  /* Until we store the proper pid, enable sigchld_handler
     to recognize an unknown pid as standing for this process.
     It is very important not to let this `marker' value stay
     in the table after this function has returned; if it does
     it might cause call-process to hang and subsequent asynchronous
     processes to get their return values scrambled.  */
  XSETINT (XPROCESS (process)->pid, -1);

  {
    /* child_setup must clobber environ on systems with true vfork.
       Protect it from permanent change.  */
    char **save_environ = environ;

    pid = vfork ();
    if (pid == 0)
      {
        int xforkin = forkin;
        int xforkout = forkout;

#if 0 /* This was probably a mistake--it duplicates code later on,
         but fails to handle all the cases.  */
        /* Make sure SIGCHLD is not blocked in the child.  */
        sigsetmask (SIGEMPTYMASK);
#endif

        /* Make the pty be the controlling terminal of the process.  */
#ifdef HAVE_PTYS
        /* First, disconnect its current controlling terminal.  */
#ifdef HAVE_SETSID
        setsid ();
#else /* not HAVE_SETSID */
#ifdef USG
        /* It's very important to call setpgrp() here and no time
           afterwards.  Otherwise, we lose our controlling tty which
           is set when we open the pty. */
        setpgrp ();
#endif /* USG */
#endif /* not HAVE_SETSID */
#ifdef TIOCNOTTY 
        /* In 4.3BSD, the TIOCSPGRP bug has been fixed, and now you
           can do TIOCSPGRP only to the process's controlling tty.  */
        if (pty_flag)
          {
            /* I wonder: would just ioctl (0, TIOCNOTTY, 0) work here? 
               I can't test it since I don't have 4.3.  */
            int j = open ("/dev/tty", O_RDWR, 0);
            ioctl (j, TIOCNOTTY, 0);
            close (j);
#ifndef USG
            /* In order to get a controlling terminal on some versions
               of BSD, it is necessary to put the process in pgrp 0
               before it opens the terminal.  */
            setpgrp (0, 0);
#endif
          }
#endif /* TIOCNOTTY */

#if !defined (RTU) && !defined (UNIPLUS)
/*** There is a suggestion that this ought to be a
     conditional on TIOCSPGRP.  */
        /* Now close the pty (if we had it open) and reopen it.
           This makes the pty the controlling terminal of the subprocess.  */
        if (pty_flag)
          {
            /* I wonder if close (open (pty_name, ...)) would work?  */
            if (xforkin >= 0)
              close (xforkin);
            xforkout = xforkin = open (pty_name, O_RDWR, 0);

            if (xforkin < 0)
              abort ();
          }
#endif /* not UNIPLUS and not RTU */
#ifdef SETUP_SLAVE_PTY
        SETUP_SLAVE_PTY;
#endif /* SETUP_SLAVE_PTY */
#ifdef AIX
        /* On AIX, we've disabled SIGHUP above once we start a child on a pty.
           Now reenable it in the child, so it will die when we want it to.  */
        if (pty_flag)
          signal (SIGHUP, SIG_DFL);
#endif
#endif /* HAVE_PTYS */

#ifdef SIGCHLD
#ifdef BSD4_1
        sigrelse (SIGCHLD);
#else /* not BSD4_1 */
#if defined (BSD) || defined (UNIPLUS) || defined (HPUX)
        sigsetmask (SIGEMPTYMASK);
#else /* ordinary USG */
        signal (SIGCHLD, sigchld);
#endif /* ordinary USG */
#endif /* not BSD4_1 */
#endif /* SIGCHLD */

        child_setup_tty (xforkout);
        child_setup (xforkin, xforkout, xforkout,
                     new_argv, env, 1, current_dir);
      }
    environ = save_environ;
  }

  if (pid < 0)
    {
      remove_process (process);
      report_file_error ("Doing vfork", Qnil);
    }

  XFASTINT (XPROCESS (process)->pid) = pid;

  FD_SET (inchannel, &input_wait_mask);

  /* If the subfork execv fails, and it exits,
     this close hangs.  I don't know why.
     So have an interrupt jar it loose.  */
  stop_polling ();
  signal (SIGALRM, create_process_1);
  alarm (1);
#ifdef SYSV4_PTYS
  /* OK to close only if it's not a pty.  Otherwise we need to leave
     it open for ioctl to get pgrp when signals are sent, or to send
     the interrupt characters through if that's how we're signalling
     subprocesses.  Alternately if you are concerned about running out
     of file descriptors, you could just save the tty name and open
     just to do the ioctl.  */
  if (NILP (XFASTINT (XPROCESS (process)->pty_flag)))
#endif
    {
      XPROCESS (process)->subtty = Qnil;
      if (forkin >= 0)
        close (forkin);
    }
  alarm (0);
  start_polling ();
  if (forkin != forkout && forkout >= 0)
    close (forkout);

#ifdef SIGCHLD
#ifdef BSD4_1
  sigrelse (SIGCHLD);
#else /* not BSD4_1 */
#if defined (BSD) || defined (UNIPLUS) || defined (HPUX)
  sigsetmask (SIGEMPTYMASK);
#else /* ordinary USG */
#if 0
  signal (SIGCHLD, sigchld);
  /* Now really handle any of these signals
     that came in during this function.  */
  if (sigchld_deferred)
    kill (getpid (), SIGCHLD);
#endif
#endif /* ordinary USG */
#endif /* not BSD4_1 */
#endif /* SIGCHLD */
}
#endif /* not VMS */

#ifdef HAVE_SOCKETS

/* open a TCP network connection to a given HOST/SERVICE.  Treated
   exactly like a normal process when reading and writing.  Only
   differences are in status display and process deletion.  A network
   connection has no PID; you cannot signal it.  All you can do is
   deactivate and close it via delete-process */

DEFUN ("open-network-stream", Fopen_network_stream, Sopen_network_stream, 
       4, 4, 0, 
  "Open a TCP connection for a service to a host.\n\
Returns a subprocess-object to represent the connection.\n\
Input and output work as for subprocesses; `delete-process' closes it.\n\
Args are NAME BUFFER HOST SERVICE.\n\
NAME is name for process.  It is modified if necessary to make it unique.\n\
BUFFER is the buffer (or buffer-name) to associate with the process.\n\
 Process output goes at end of that buffer, unless you specify\n\
 an output stream or filter function to handle the output.\n\
 BUFFER may be also nil, meaning that this process is not associated\n\
 with any buffer\n\
Third arg is name of the host to connect to, or its IP address.\n\
Fourth arg SERVICE is name of the service desired, or an integer\n\
 specifying a port number to connect to.")
   (name, buffer, host, service)
      Lisp_Object name, buffer, host, service;
{
  Lisp_Object proc;
  register int i;
  struct sockaddr_in address;
  struct servent *svc_info;
  struct hostent *host_info_ptr, host_info;
  char *(addr_list[2]);
  unsigned long numeric_addr;
  int s, outch, inch;
  char errstring[80];
  int port;
  struct hostent host_info_fixed;
  struct gcpro gcpro1, gcpro2, gcpro3, gcpro4;

  GCPRO4 (name, buffer, host, service);
  CHECK_STRING (name, 0);
  CHECK_STRING (host, 0);
  if (XTYPE(service) == Lisp_Int)
    port = htons ((unsigned short) XINT (service));
  else
    {
      CHECK_STRING (service, 0);
      svc_info = getservbyname (XSTRING (service)->data, "tcp");
      if (svc_info == 0)
        error ("Unknown service \"%s\"", XSTRING (service)->data);
      port = svc_info->s_port;
    }

  host_info_ptr = gethostbyname (XSTRING (host)->data);
  if (host_info_ptr == 0)
    /* Attempt to interpret host as numeric inet address */
    {
      numeric_addr = inet_addr (XSTRING (host)->data);
      if (numeric_addr == -1)
        error ("Unknown host \"%s\"", XSTRING (host)->data);

      host_info_ptr = &host_info;
      host_info.h_name = 0;
      host_info.h_aliases = 0;
      host_info.h_addrtype = AF_INET;
      host_info.h_addr_list  =  &(addr_list[0]);
      addr_list[0] = (char*)(&numeric_addr);
      addr_list[1] = 0;
      host_info.h_length = strlen (addr_list[0]);
    }

  bzero (&address, sizeof address);
  bcopy (host_info_ptr->h_addr, (char *) &address.sin_addr,
         host_info_ptr->h_length);
  address.sin_family = host_info_ptr->h_addrtype;
  address.sin_port = port;

  s = socket (host_info_ptr->h_addrtype, SOCK_STREAM, 0);
  if (s < 0) 
    report_file_error ("error creating socket", Fcons (name, Qnil));

 loop:
  if (connect (s, &address, sizeof address) == -1)
    {
      int xerrno = errno;
      if (errno == EINTR)
        goto loop;
      close (s);
      errno = xerrno;
      report_file_error ("connection failed",
                         Fcons (host, Fcons (name, Qnil)));
    }

  inch = s;
  outch = dup (s);
  if (outch < 0) 
    report_file_error ("error duplicating socket", Fcons (name, Qnil));

  if (!NILP (buffer))
    buffer = Fget_buffer_create (buffer);
  proc = make_process (name);

  chan_process[inch] = proc;

#ifdef O_NONBLOCK
  fcntl (inch, F_SETFL, O_NONBLOCK);
#else
#ifdef O_NDELAY
  fcntl (inch, F_SETFL, O_NDELAY);
#endif
#endif

  XPROCESS (proc)->childp = host;
  XPROCESS (proc)->command_channel_p = Qnil;
  XPROCESS (proc)->buffer = buffer;
  XPROCESS (proc)->sentinel = Qnil;
  XPROCESS (proc)->filter = Qnil;
  XPROCESS (proc)->command = Qnil;
  XPROCESS (proc)->pid = Qnil;
  XFASTINT (XPROCESS (proc)->infd) = s;
  XFASTINT (XPROCESS (proc)->outfd) = outch;
  XPROCESS (proc)->status = Qrun;
  FD_SET (inch, &input_wait_mask);

  UNGCPRO;
  return proc;
}
#endif  /* HAVE_SOCKETS */

deactivate_process (proc)
     Lisp_Object proc;
{
  register int inchannel, outchannel;
  register struct Lisp_Process *p = XPROCESS (proc);

  inchannel = XFASTINT (p->infd);
  outchannel = XFASTINT (p->outfd);

  if (inchannel)
    {
      /* Beware SIGCHLD hereabouts. */
      flush_pending_output (inchannel);
#ifdef VMS
      {
        VMS_PROC_STUFF *get_vms_process_pointer (), *vs;
        sys$dassgn (outchannel);
        vs = get_vms_process_pointer (p->pid)
        if (vs)
          give_back_vms_process_stuff (vs);
      }
#else
      close (inchannel);
      if (outchannel && outchannel != inchannel)
        close (outchannel);
#endif

      XFASTINT (p->infd) = 0;
      XFASTINT (p->outfd) = 0;
      chan_process[inchannel] = Qnil;
      FD_CLR (inchannel, &input_wait_mask);
    }
}

/* Close all descriptors currently in use for communication
   with subprocess.  This is used in a newly-forked subprocess
   to get rid of irrelevant descriptors.  */

close_process_descs ()
{
  int i;
  for (i = 0; i < MAXDESC; i++)
    {
      Lisp_Object process;
      process = chan_process[i];
      if (!NILP (process))
        {
          int in = XFASTINT (XPROCESS (process)->infd);
          int out = XFASTINT (XPROCESS (process)->outfd);
          if (in)
            close (in);
          if (out && in != out)
            close (out);
        }
    }
}
\f
DEFUN ("accept-process-output", Faccept_process_output, Saccept_process_output,
  0, 3, 0,
  "Allow any pending output from subprocesses to be read by Emacs.\n\
It is read into the process' buffers or given to their filter functions.\n\
Non-nil arg PROCESS means do not return until some output has been received\n\
from PROCESS.\n\
Non-nil second arg TIMEOUT and third arg TIMEOUT-MSECS are number of\n\
seconds and microseconds to wait; return after that much time whether\n\
or not there is input.\n\
Return non-nil iff we received any output before the timeout expired.")
  (proc, timeout, timeout_msecs)
     register Lisp_Object proc, timeout, timeout_msecs;
{
  int seconds;
  int useconds;

  if (! NILP (timeout_msecs))
    {
      CHECK_NUMBER (timeout_msecs, 2);
      useconds = XINT (timeout_msecs);
      if (XTYPE (timeout) != Lisp_Int)
        XSET (timeout, Lisp_Int, 0);

      {
        int carry = useconds / 1000000;

        XSETINT (timeout, XINT (timeout) + carry);
        useconds -= carry * 1000000;

        /* I think this clause is necessary because C doesn't
           guarantee a particular rounding direction for negative
           integers.  */
        if (useconds < 0)
          {
            XSETINT (timeout, XINT (timeout) - 1);
            useconds += 1000000;
          }
      }
    }

  if (! NILP (timeout))
    {
      CHECK_NUMBER (timeout, 1);
      seconds = XINT (timeout);
      if (seconds <= 0)
        seconds = -1;
    }
  else
    {
      if (NILP (proc))
        seconds = -1;
      else
        seconds = 0;
    }

  return
    (wait_reading_process_input (seconds, useconds,
                                 (NILP (proc)
                                  ? XPROCESS (get_process (proc)) : 0), 0)
     ? Qt : Qnil);
}

/* This variable is different from waiting_for_input in keyboard.c.
   It is used to communicate to a lisp process-filter/sentinel (via the
   function Fwaiting_for_user_input_p below) whether emacs was waiting
   for user-input when that process-filter was called.
   waiting_for_input cannot be used as that is by definition 0 when
   lisp code is being evalled */
static int waiting_for_user_input_p;

/* Read and dispose of subprocess output while waiting for timeout to
   elapse and/or keyboard input to be available.

   time_limit is:
     timeout in seconds, or
     zero for no limit, or
     -1 means gobble data immediately available but don't wait for any.

   read_kbd is:
     0 to ignore keyboard input, or
     1 to return when input is available, or
     -1 means caller will actually read the input, so don't throw to
       the quit handler, or
     a pointer to a struct Lisp_Process, meaning wait until something
       arrives from that process.  The return value is true iff we read
       some input from that process.

   do_display != 0 means redisplay should be done to show subprocess
   output that arrives.

   If read_kbd is a pointer to a struct Lisp_Process, then the
     function returns true iff we received input from that process
     before the timeout elapsed.
   Otherwise, return true iff we recieved input from any process.  */

wait_reading_process_input (time_limit, microsecs, read_kbd, do_display)
     int time_limit, microsecs, read_kbd, do_display;
{
  register int channel, nfds, m;
  static SELECT_TYPE Available;
  int xerrno;
  Lisp_Object proc;
  EMACS_TIME timeout, end_time, garbage;
  SELECT_TYPE Atemp;
  int wait_channel = 0;
  struct Lisp_Process *wait_proc = 0;
  int got_some_input = 0;

  FD_ZERO (&Available);

  /* Detect when read_kbd is really the address of a Lisp_Process.  */
  if (read_kbd > 10 || read_kbd < -1)
    {
      wait_proc = (struct Lisp_Process *) read_kbd;
      wait_channel = XFASTINT (wait_proc->infd);
      read_kbd = 0;
    }

  waiting_for_user_input_p = read_kbd;

  /* Since we may need to wait several times,
     compute the absolute time to return at.  */
  if (time_limit || microsecs)
    {
      EMACS_GET_TIME (end_time);
      EMACS_SET_SECS_USECS (timeout, time_limit, microsecs);
      EMACS_ADD_TIME (end_time, end_time, timeout);
    }

  /* Turn off periodic alarms (in case they are in use)
     because the select emulator uses alarms.  */
  stop_polling ();

  while (1)
    {
      /* If calling from keyboard input, do not quit
         since we want to return C-g as an input character.
         Otherwise, do pending quit if requested.  */
      if (read_kbd >= 0)
        QUIT;

      /* If status of something has changed, and no input is available,
         notify the user of the change right away */
      if (update_tick != process_tick && do_display)
        {
          Atemp = input_wait_mask;
          EMACS_SET_SECS_USECS (timeout, 0, 0);
          if (select (MAXDESC, &Atemp, 0, 0, &timeout) <= 0)
            status_notify ();
        }

      /* Don't wait for output from a non-running process.  */
      if (wait_proc != 0 && !NILP (wait_proc->raw_status_low))
        update_status (wait_proc);
      if (wait_proc != 0
          && ! EQ (wait_proc->status, Qrun))
        break;

      /* Compute time from now till when time limit is up */
      /* Exit if already run out */
      if (time_limit == -1)
        {
          /* -1 specified for timeout means
             gobble output available now
             but don't wait at all. */

          EMACS_SET_SECS_USECS (timeout, 0, 0);
        }
      else if (time_limit || microsecs)
        {
          EMACS_GET_TIME (timeout);
          EMACS_SUB_TIME (timeout, end_time, timeout);
          if (EMACS_TIME_NEG_P (timeout))
            break;
        }
      else
        {
          EMACS_SET_SECS_USECS (timeout, 100000, 0);
        }

      /* Cause C-g and alarm signals to take immediate action,
         and cause input available signals to zero out timeout */
      if (read_kbd < 0)
        set_waiting_for_input (&timeout);

      /* Wait till there is something to do */

      Available = input_wait_mask;
      if (!read_kbd)
        FD_CLR (0, &Available);

      /* If a screen has been newly mapped and needs updating,
         reprocess its display stuff.  */
      if (screen_garbaged)
        redisplay_preserve_echo_area ();

      if (read_kbd && detect_input_pending ())
        nfds = 0;
      else
        nfds = select (MAXDESC, &Available, 0, 0, &timeout);

      xerrno = errno;

      /* Make C-g and alarm signals set flags again */
      clear_waiting_for_input ();

      /*  If we woke up due to SIGWINCH, actually change size now.  */
      do_pending_window_change ();

      if (time_limit && nfds == 0)      /* timeout elapsed */
        break;
      if (nfds < 0)
        {
          if (xerrno == EINTR)
            FD_ZERO (&Available);
#ifdef ALLIANT
          /* This happens for no known reason on ALLIANT.
             I am guessing that this is the right response. -- RMS.  */
          else if (xerrno == EFAULT)
            FD_ZERO (&Available);
#endif
          else if (xerrno == EBADF)
            {
#ifdef AIX
              /* AIX doesn't handle PTY closure the same way BSD does.  On AIX,
                 the child's closure of the pts gives the parent a SIGHUP, and
                 the ptc file descriptor is automatically closed,
                 yielding EBADF here or at select() call above.
                 So, SIGHUP is ignored (see def of PTY_TTY_NAME_SPRINTF
                 in m-ibmrt-aix.h), and here we just ignore the select error.
                 Cleanup occurs c/o status_notify after SIGCLD. */
              FD_ZERO (&Available);          /* Cannot depend on values returned */
#else
              abort ();
#endif
            }
          else
            error("select error: %s", sys_errlist[xerrno]);
        }
#ifdef sun
      else if (nfds > 0 && FD_ISSET (0, &Available) && interrupt_input)
        /* System sometimes fails to deliver SIGIO.  */
        kill (getpid (), SIGIO);
#endif

      /* Check for keyboard input */
      /* If there is any, return immediately
         to give it higher priority than subprocesses */

      if (read_kbd && detect_input_pending ())
        break;

      /* If we think we have keyboard input waiting, but didn't get SIGIO
         go read it.  This can happen with X on BSD after logging out.
         In that case, there really is no input and no SIGIO,
         but select says there is input.  */

      /*
      if (read_kbd && interrupt_input && (Available & fileno (stdin)))
      */
      if (read_kbd && interrupt_input && (FD_ISSET (fileno (stdin), &Available)))
        kill (0, SIGIO);

#ifdef vipc
      /* Check for connection from other process */

      if (Available & ChannelMask (comm_server))
        {
          Available &= ~(ChannelMask (comm_server));
          create_commchan ();
        }
#endif vipc

      if (! wait_proc)
        got_some_input |= nfds > 0;

      /* Check for data from a process or a command channel */
      for (channel = FIRST_PROC_DESC; channel < MAXDESC; channel++)
        {
          if (FD_ISSET (channel, &Available))
            {
              int nread;

              /* If waiting for this channel, arrange to return as
                 soon as no more input to be processed.  No more
                 waiting.  */
              if (wait_channel == channel)
                {
                  wait_channel = 0;
                  time_limit = -1;
                  got_some_input = 1;
                }
              proc = chan_process[channel];
              if (NILP (proc))
                continue;

#ifdef vipc
              /* It's a command channel */
              if (!NILP (XPROCESS (proc)->command_channel_p))
                {
                  ProcessCommChan (channel, proc);
                  if (NILP (XPROCESS (proc)->command_channel_p))
                    {
                      /* It has ceased to be a command channel! */
                      int bytes_available;
                      if (ioctl (channel, FIONREAD, &bytes_available) < 0)
                        bytes_available = 0;
                      if (bytes_available)
                        FD_SET (channel, &Available);
                    }
                  continue;
                }
#endif /* vipc */

              /* Read data from the process, starting with our
                 buffered-ahead character if we have one.  */

              nread = read_process_output (proc, channel);
              if (nread > 0)
                {
                  /* Since read_process_output can run a filter,
                     which can call accept-process-output,
                     don't try to read from any other processes
                     before doing the select again.  */
                  FD_ZERO (&Available);

                  if (do_display)
                    redisplay_preserve_echo_area ();
                }
#ifdef EWOULDBLOCK
              else if (nread == -1 && errno == EWOULDBLOCK)
                ;
#else
#ifdef O_NONBLOCK
              else if (nread == -1 && errno == EAGAIN)
                ;
#else
#ifdef O_NDELAY
              else if (nread == -1 && errno == EAGAIN)
                ;
              /* Note that we cannot distinguish between no input
                 available now and a closed pipe.
                 With luck, a closed pipe will be accompanied by
                 subprocess termination and SIGCHLD.  */
              else if (nread == 0 && !NETCONN_P (proc))
                ;
#endif /* O_NDELAY */
#endif /* O_NONBLOCK */
#endif /* EWOULDBLOCK */
#ifdef HAVE_PTYS
              /* On some OSs with ptys, when the process on one end of
                 a pty exits, the other end gets an error reading with
                 errno = EIO instead of getting an EOF (0 bytes read).
                 Therefore, if we get an error reading and errno =
                 EIO, just continue, because the child process has
                 exited and should clean itself up soon (e.g. when we
                 get a SIGCHLD). */
              else if (nread == -1 && errno == EIO)
                ;
#endif /* HAVE_PTYS */
/* If we can detect process termination, don't consider the process
   gone just because its pipe is closed.  */
#ifdef SIGCHLD
              else if (nread == 0 && !NETCONN_P (proc))
                ;
#endif
              else
                {
                  /* Preserve status of processes already terminated.  */
                  XSETINT (XPROCESS (proc)->tick, ++process_tick);
                  deactivate_process (proc);
                  if (!NILP (XPROCESS (proc)->raw_status_low))
                    update_status (XPROCESS (proc));
                  if (EQ (XPROCESS (proc)->status, Qrun))
                    XPROCESS (proc)->status
                      = Fcons (Qexit, Fcons (make_number (256), Qnil));
                }
            }
        } /* end for each file descriptor */
    } /* end while exit conditions not met */

  /* Resume periodic signals to poll for input, if necessary.  */
  start_polling ();

  return got_some_input;
}
\f
/* Read pending output from the process channel,
   starting with our buffered-ahead character if we have one.
   Yield number of characters read.

   This function reads at most 1024 characters.
   If you want to read all available subprocess output,
   you must call it repeatedly until it returns zero.  */

read_process_output (proc, channel)
     Lisp_Object proc;
     register int channel;
{
  register int nchars;
#ifdef VMS
  char *chars;
#else
  char chars[1024];
#endif
  register Lisp_Object outstream;
  register struct buffer *old = current_buffer;
  register struct Lisp_Process *p = XPROCESS (proc);
  register int opoint;

#ifdef VMS
  VMS_PROC_STUFF *vs, *get_vms_process_pointer();

  vs = get_vms_process_pointer (p->pid);
  if (vs)
    {
      if (!vs->iosb[0])
        return(0);              /* Really weird if it does this */
      if (!(vs->iosb[0] & 1))
        return -1;              /* I/O error */
    }
  else
    error ("Could not get VMS process pointer");
  chars = vs->inputBuffer;
  nchars = clean_vms_buffer (chars, vs->iosb[1]);
  if (nchars <= 0)
    {
      start_vms_process_read (vs); /* Crank up the next read on the process */
      return 1;                 /* Nothing worth printing, say we got 1 */
    }
#else /* not VMS */

  if (proc_buffered_char[channel] < 0)
    nchars = read (channel, chars, sizeof chars);
  else
    {
      chars[0] = proc_buffered_char[channel];
      proc_buffered_char[channel] = -1;
      nchars = read (channel, chars + 1, sizeof chars - 1);
      if (nchars < 0)
        nchars = 1;
      else
        nchars = nchars + 1;
    }
#endif /* not VMS */

  if (nchars <= 0) return nchars;

  outstream = p->filter;
  if (!NILP (outstream))
    {
      /* We inhibit quit here instead of just catching it so that 
         hitting ^G when a filter happens to be running won't screw
         it up.  */
      int count = specpdl_ptr - specpdl;
      specbind (Qinhibit_quit, Qt);
      call2 (outstream, proc, make_string (chars, nchars));

#ifdef VMS
      start_vms_process_read (vs);
#endif
      unbind_to (count);
      return nchars;
    }

  /* If no filter, write into buffer if it isn't dead.  */
  if (!NILP (p->buffer) && !NILP (XBUFFER (p->buffer)->name))
    {
      Lisp_Object tem;

      Fset_buffer (p->buffer);
      opoint = point;

      /* Insert new output into buffer
         at the current end-of-output marker,
         thus preserving logical ordering of input and output.  */
      if (XMARKER (p->mark)->buffer)
        SET_PT (marker_position (p->mark));
      else
        SET_PT (ZV);
      if (point <= opoint)
        opoint += nchars;

      tem = current_buffer->read_only;
      current_buffer->read_only = Qnil;
      /* Insert before markers in case we are inserting where
         the buffer's mark is, and the user's next command is Meta-y.  */
      insert_before_markers (chars, nchars);
      current_buffer->read_only = tem;
      Fset_marker (p->mark, make_number (point), p->buffer);
      update_mode_lines++;

      SET_PT (opoint);
      set_buffer_internal (old);
    }
#ifdef VMS
  start_vms_process_read (vs);
#endif
  return nchars;
}

DEFUN ("waiting-for-user-input-p", Fwaiting_for_user_input_p, Swaiting_for_user_input_p,
       0, 0, 0,
  "Returns non-NIL if emacs is waiting for input from the user.\n\
This is intended for use by asynchronous process output filters and sentinels.")
       ()
{
  return ((waiting_for_user_input_p) ? Qt : Qnil);
}
\f
/* Sending data to subprocess */

jmp_buf send_process_frame;

SIGTYPE
send_process_trap ()
{
#ifdef BSD4_1
  sigrelse (SIGPIPE);
  sigrelse (SIGALRM);
#endif /* BSD4_1 */
  longjmp (send_process_frame, 1);
}

send_process (proc, buf, len)
     Lisp_Object proc;
     char *buf;
     int len;
{
  /* Don't use register vars; longjmp can lose them.  */
  int rv;
  unsigned char *procname = XSTRING (XPROCESS (proc)->name)->data;


#ifdef VMS
  struct Lisp_Process *p = XPROCESS (proc);
  VMS_PROC_STUFF *vs, *get_vms_process_pointer();
#endif /* VMS */

  if (! NILP (XPROCESS (proc)->raw_status_low))
    update_status (XPROCESS (proc));
  if (! EQ (XPROCESS (proc)->status, Qrun))
    error ("Process %s not running", procname);

#ifdef VMS
  vs = get_vms_process_pointer (p->pid);
  if (vs == 0)
    error ("Could not find this process: %x", p->pid);
  else if (write_to_vms_process (vs, buf, len))
    ;
#else
  if (!setjmp (send_process_frame))
    while (len > 0)
      {
        int this = len;
        /* Don't send more than 500 bytes at a time.  */
        if (this > 500)
          this = 500;
        signal (SIGPIPE, send_process_trap);
        rv = write (XFASTINT (XPROCESS (proc)->outfd), buf, this);
        signal (SIGPIPE, SIG_DFL);
        if (rv < 0)
          {
            if (0
#ifdef EWOULDBLOCK
                || errno == EWOULDBLOCK
#endif
#ifdef EAGAIN
                || errno == EAGAIN
#endif
                )
              {
                /* It would be nice to accept process output here,
                   but that is difficult.  For example, it could
                   garbage what we are sending if that is from a buffer.  */
                immediate_quit = 1;
                QUIT;
                sleep (1);
                immediate_quit = 0;
                continue;
              }
            report_file_error ("writing to process", Fcons (proc, Qnil));
          }
        buf += rv;
        len -= rv;
        /* Allow input from processes between bursts of sending.
           Otherwise things may get stopped up.  */
        if (len > 0)
          wait_reading_process_input (-1, 0, 0, 0);
      }
#endif
  else
    {
      XPROCESS (proc)->raw_status_low = Qnil;
      XPROCESS (proc)->raw_status_high = Qnil;
      XPROCESS (proc)->status = Fcons (Qexit, Fcons (make_number (256), Qnil));
      XSETINT (XPROCESS (proc)->tick, ++process_tick);
      deactivate_process (proc);
#ifdef VMS
      error ("Error writing to process %s; closed it", procname);
#else
      error ("SIGPIPE raised on process %s; closed it", procname);
#endif
    }
}

DEFUN ("process-send-region", Fprocess_send_region, Sprocess_send_region,
  3, 3, 0,
  "Send current contents of region as input to PROCESS.\n\
PROCESS may be a process name or an actual process.\n\
Called from program, takes three arguments, PROCESS, START and END.\n\
If the region is more than 500 characters long,\n\
it is sent in several bunches.  This may happen even for shorter regions.\n\
Output from processes can arrive in between bunches.")
  (process, start, end)
     Lisp_Object process, start, end;
{
  Lisp_Object proc;
  int start1;

  proc = get_process (process);
  validate_region (&start, &end);

  if (XINT (start) < GPT && XINT (end) > GPT)
    move_gap (start);

  start1 = XINT (start);
  send_process (proc, &FETCH_CHAR (start1), XINT (end) - XINT (start));

  return Qnil;
}

DEFUN ("process-send-string", Fprocess_send_string, Sprocess_send_string,
  2, 2, 0,
  "Send PROCESS the contents of STRING as input.\n\
PROCESS may be a process name or an actual process.\n\
If STRING is more than 500 characters long,\n\
it is sent in several bunches.  This may happen even for shorter strings.\n\
Output from processes can arrive in between bunches.")
  (process, string)
     Lisp_Object process, string;
{
  Lisp_Object proc;
  CHECK_STRING (string, 1);
  proc = get_process (process);
  send_process (proc, XSTRING (string)->data, XSTRING (string)->size);
  return Qnil;
}
\f
/* send a signal number SIGNO to PROCESS.
   CURRENT_GROUP means send to the process group that currently owns
   the terminal being used to communicate with PROCESS.
   This is used for various commands in shell mode.
   If NOMSG is zero, insert signal-announcements into process's buffers
   right away.  */

process_send_signal (process, signo, current_group, nomsg)
     Lisp_Object process;
     int signo;
     Lisp_Object current_group;
     int nomsg;
{
  Lisp_Object proc;
  register struct Lisp_Process *p;
  int gid;
  int no_pgrp = 0;

  proc = get_process (process);
  p = XPROCESS (proc);

  if (!EQ (p->childp, Qt))
    error ("Process %s is not a subprocess",
           XSTRING (p->name)->data);
  if (!XFASTINT (p->infd))
    error ("Process %s is not active",
           XSTRING (p->name)->data);

  if (NILP (p->pty_flag))
    current_group = Qnil;

#ifdef TIOCGPGRP                /* Not sure about this! (fnf) */
  /* If we are using pgrps, get a pgrp number and make it negative.  */
  if (!NILP (current_group))
    {
      /* If possible, send signals to the entire pgrp
         by sending an input character to it.  */
#if defined (TIOCGLTC) && defined (TIOCGETC)
      struct tchars c;
      struct ltchars lc;

      switch (signo)
        {
        case SIGINT:
          ioctl (XFASTINT (p->infd), TIOCGETC, &c);
          send_process (proc, &c.t_intrc, 1);
          return Qnil;
        case SIGQUIT:
          ioctl (XFASTINT (p->infd), TIOCGETC, &c);
          send_process (proc, &c.t_quitc, 1);
          return Qnil;
        case SIGTSTP:
          ioctl (XFASTINT (p->infd), TIOCGLTC, &lc);
          send_process (proc, &lc.t_suspc, 1);
          return Qnil;
        }
#endif /* have TIOCGLTC and have TIOCGETC */
      /* It is possible that the following code would work
         on other kinds of USG systems, not just on the IRIS.
         This should be tried in Emacs 19.  */
#if defined (IRIS) && defined (HAVE_SETSID) /* Check for Irix, not older
                                               systems.  */
      struct termio t;
      switch (signo)
        {
        case SIGINT:
          ioctl (XFASTINT (p->infd), TCGETA, &t);
          send_process (proc, &t.c_cc[VINTR], 1);
          return Qnil;
        case SIGQUIT:
          ioctl (XFASTINT (p->infd), TCGETA, &t);
          send_process (proc, &t.c_cc[VQUIT], 1);
          return Qnil;
        case SIGTSTP:
          ioctl (XFASTINT (p->infd), TCGETA, &t);
          send_process (proc, &t.c_cc[VSWTCH], 1);
          return Qnil;
        }
#endif /* IRIS and HAVE_SETSID */

      /* Get the pgrp using the tty itself, if we have that.
         Otherwise, use the pty to get the pgrp.
         On pfa systems, saka@pfu.fujitsu.co.JP writes:
         "TICGPGRP symbol defined in sys/ioctl.h at E50.
          But, TIOCGPGRP donot work on E50 ;-P work fine on E60"
         His patch indicates that if TIOCGPGRP returns an error, then
         we should just assume that p->pid is also the process group id.  */
      {
        int err;

        if (!NILP (p->subtty))
          err = ioctl (XFASTINT (p->subtty), TIOCGPGRP, &gid);
        else
          err = ioctl (XFASTINT (p->infd), TIOCGPGRP, &gid);

#ifdef pfa
        if (err == -1)
          gid = - XFASTINT (p->pid);
#endif
      }
      if (gid == -1)
        no_pgrp = 1;
      else
        gid = - gid;
    }
  else
    gid = - XFASTINT (p->pid);
#else /* not using pgrps */
  /* Can't select pgrps on this system, so we know that
     the child itself heads the pgrp.  */
  gid = - XFASTINT (p->pid);
#endif /* not using pgrps */

  switch (signo)
    {
#ifdef SIGCONT
    case SIGCONT:
      p->raw_status_low = Qnil;
      p->raw_status_high = Qnil;
      p->status = Qrun;
      XSETINT (p->tick, ++process_tick);
      if (!nomsg)
        status_notify ();
      break;
#endif
    case SIGINT:
#ifdef VMS
      send_process (proc, "\003", 1);   /* ^C */
      goto whoosh;
#endif
    case SIGQUIT:
#ifdef VMS
      send_process (proc, "\031", 1);   /* ^Y */
      goto whoosh;
#endif
    case SIGKILL:
#ifdef VMS
      sys$forcex (&(XFASTINT (p->pid)), 0, 1);
      whoosh:
#endif
      flush_pending_output (XFASTINT (p->infd));
      break;
    }

  /* If we don't have process groups, send the signal to the immediate
     subprocess.  That isn't really right, but it's better than any
     obvious alternative.  */
  if (no_pgrp)
    {
      kill (XFASTINT (p->pid), signo);
      return;
    }

  /* gid may be a pid, or minus a pgrp's number */
#ifdef TIOCSIGSEND
  if (!NILP (current_group))
    ioctl (XFASTINT (p->infd), TIOCSIGSEND, signo);
  else
    {
      gid = - XFASTINT (p->pid);
      kill (gid, signo);
    }
#else /* no TIOCSIGSEND */
  EMACS_KILLPG (-gid, signo);
#endif
}

DEFUN ("interrupt-process", Finterrupt_process, Sinterrupt_process, 0, 2, 0,
  "Interrupt process PROCESS.  May be process or name of one.\n\
Nil or no arg means current buffer's process.\n\
Second arg CURRENT-GROUP non-nil means send signal to\n\
the current process-group of the process's controlling terminal\n\
rather than to the process's own process group.\n\
If the process is a shell, this means interrupt current subjob\n\
rather than the shell.")
  (process, current_group)
     Lisp_Object process, current_group;
{
  process_send_signal (process, SIGINT, current_group, 0);
  return process;
}

DEFUN ("kill-process", Fkill_process, Skill_process, 0, 2, 0,
  "Kill process PROCESS.  May be process or name of one.\n\
See function `interrupt-process' for more details on usage.")
  (process, current_group)
     Lisp_Object process, current_group;
{
  process_send_signal (process, SIGKILL, current_group, 0);
  return process;
}

DEFUN ("quit-process", Fquit_process, Squit_process, 0, 2, 0,
  "Send QUIT signal to process PROCESS.  May be process or name of one.\n\
See function `interrupt-process' for more details on usage.")
  (process, current_group)
     Lisp_Object process, current_group;
{
  process_send_signal (process, SIGQUIT, current_group, 0);
  return process;
}

DEFUN ("stop-process", Fstop_process, Sstop_process, 0, 2, 0,
  "Stop process PROCESS.  May be process or name of one.\n\
See function `interrupt-process' for more details on usage.")
  (process, current_group)
     Lisp_Object process, current_group;
{
#ifndef SIGTSTP
  error ("no SIGTSTP support");
#else
  process_send_signal (process, SIGTSTP, current_group, 0);
#endif
  return process;
}

DEFUN ("continue-process", Fcontinue_process, Scontinue_process, 0, 2, 0,
  "Continue process PROCESS.  May be process or name of one.\n\
See function `interrupt-process' for more details on usage.")
  (process, current_group)
     Lisp_Object process, current_group;
{
#ifdef SIGCONT
    process_send_signal (process, SIGCONT, current_group, 0);
#else
    error ("no SIGCONT support");
#endif
  return process;
}

DEFUN ("signal-process", Fsignal_process, Ssignal_process,
  2, 2, "nProcess number: \nnSignal code: ",
  "Send the process with number PID the signal with code CODE.\n\
Both PID and CODE are integers.")
  (pid, sig)
     Lisp_Object pid, sig;
{
  CHECK_NUMBER (pid, 0);
  CHECK_NUMBER (sig, 1);
  return make_number (kill (XINT (pid), XINT (sig)));
}

DEFUN ("process-send-eof", Fprocess_send_eof, Sprocess_send_eof, 0, 1, 0,
  "Make PROCESS see end-of-file in its input.\n\
Eof comes after any text already sent to it.\n\
nil or no arg means current buffer's process.")
  (process)
     Lisp_Object process;
{
  Lisp_Object proc;

  proc = get_process (process);
  /* Sending a zero-length record is supposed to mean eof
     when TIOCREMOTE is turned on.  */
#ifdef DID_REMOTE
  {
    char buf[1];
    write (XFASTINT (XPROCESS (proc)->outfd), buf, 0);
  }
#else /* did not do TOICREMOTE */
#ifdef VMS
  send_process (proc, "\032", 1);       /* ^z */
#else
  if (!NILP (XPROCESS (proc)->pty_flag))
    send_process (proc, "\004", 1);
  else
    {
      close (XPROCESS (proc)->outfd);
      XFASTINT (XPROCESS (proc)->outfd) = open ("/dev/null", O_WRONLY);
    }
#endif /* VMS */
#endif /* did not do TOICREMOTE */
  return process;
}

/* Kill all processes associated with `buffer'.
 If `buffer' is nil, kill all processes  */

kill_buffer_processes (buffer)
     Lisp_Object buffer;
{
  Lisp_Object tail, proc;

  for (tail = Vprocess_alist; XGCTYPE (tail) == Lisp_Cons;
       tail = XCONS (tail)->cdr)
    {
      proc = XCONS (XCONS (tail)->car)->cdr;
      if (XGCTYPE (proc) == Lisp_Process
          && (NILP (buffer) || EQ (XPROCESS (proc)->buffer, buffer)))
        {
          if (NETCONN_P (proc))
            deactivate_process (proc);
          else if (XFASTINT (XPROCESS (proc)->infd))
            process_send_signal (proc, SIGHUP, Qnil, 1);
        }
    }
}
\f
/* On receipt of a signal that a child status has changed,
 loop asking about children with changed statuses until
 the system says there are no more.
   All we do is change the status;
 we do not run sentinels or print notifications.
 That is saved for the next time keyboard input is done,
 in order to avoid timing errors.  */

/** WARNING: this can be called during garbage collection.
 Therefore, it must not be fooled by the presence of mark bits in
 Lisp objects.  */

/** USG WARNING:  Although it is not obvious from the documentation
 in signal(2), on a USG system the SIGCLD handler MUST NOT call
 signal() before executing at least one wait(), otherwise the handler
 will be called again, resulting in an infinite loop.  The relevant
 portion of the documentation reads "SIGCLD signals will be queued
 and the signal-catching function will be continually reentered until
 the queue is empty".  Invoking signal() causes the kernel to reexamine
 the SIGCLD queue.   Fred Fish, UniSoft Systems Inc. */

SIGTYPE
sigchld_handler (signo)
     int signo;
{
  int old_errno = errno;
  Lisp_Object proc;
  register struct Lisp_Process *p;

#ifdef BSD4_1
  extern int sigheld;
  sigheld |= sigbit (SIGCHLD);
#endif

  while (1)
    {
      register int pid;
      WAITTYPE w;
      Lisp_Object tail;

#ifdef WNOHANG
#ifndef WUNTRACED
#define WUNTRACED 0
#endif /* no WUNTRACED */
      /* Keep trying to get a status until we get a definitive result.  */
      do 
        {
          errno = 0;
          pid = wait3 (&w, WNOHANG | WUNTRACED, 0);
        }
      while (pid <= 0 && errno == EINTR);

      if (pid <= 0)
        {
          /* A real failure.  We have done all our job, so return.  */

          /* USG systems forget handlers when they are used;
             must reestablish each time */
#ifdef USG
          signal (signo, sigchld_handler);   /* WARNING - must come after wait3() */
#endif
#ifdef  BSD4_1
          sigheld &= ~sigbit (SIGCHLD);
          sigrelse (SIGCHLD);
#endif
          errno = old_errno;
          return;
        }
#else
      pid = wait (&w);
#endif /* no WNOHANG */

      /* Find the process that signaled us, and record its status.  */

      p = 0;
      for (tail = Vprocess_alist; XSYMBOL (tail) != XSYMBOL (Qnil); tail = XCONS (tail)->cdr)
        {
          proc = XCONS (XCONS (tail)->car)->cdr;
          p = XPROCESS (proc);
          if (EQ (p->childp, Qt) && XFASTINT (p->pid) == pid)
            break;
          p = 0;
        }

      /* Look for an asynchronous process whose pid hasn't been filled
         in yet.  */
      if (p == 0)
        for (tail = Vprocess_alist; XSYMBOL (tail) != XSYMBOL (Qnil); tail = XCONS (tail)->cdr)
          {
            proc = XCONS (XCONS (tail)->car)->cdr;
            p = XPROCESS (proc);
            if (XTYPE (p->pid) == Lisp_Int && XINT (p->pid) == -1)
              break;
            p = 0;
          }
      
      /* Change the status of the process that was found.  */
      if (p != 0)
        {
          union { int i; WAITTYPE wt; } u;
          
          XSETINT (p->tick, ++process_tick);
          u.wt = w;
          XFASTINT (p->raw_status_low) = u.i & 0xffff;
          XFASTINT (p->raw_status_high) = u.i >> 16;
          
          /* If process has terminated, stop waiting for its output.  */
          if (WIFSIGNALED (w) || WIFEXITED (w))
            if (p->infd)
              FD_CLR (p->infd, &input_wait_mask);
        }

        /* There was no asynchronous process found for that id.  Check
           if we have a synchronous process.  */
      else
        {
          synch_process_alive = 0;

          /* Report the status of the synchronous process.  */
          if (WIFEXITED (w))
            synch_process_retcode = WRETCODE (w);
          else if (WIFSIGNALED (w))
            synch_process_death = sys_siglist[WTERMSIG (w)];
        }

      /* On some systems, we must return right away.
         If any more processes want to signal us, we will
         get another signal.
         Otherwise (on systems that have WNOHANG), loop around
         to use up all the processes that have something to tell us.  */
#if defined (USG) && ! (defined (HPUX) && defined (WNOHANG))
#ifdef USG
      signal (signo, sigchld_handler);
#endif
      errno = old_errno;
      return;
#endif /* USG, but not HPUX with WNOHANG */
    }
}
\f

static Lisp_Object
exec_sentinel_unwind (data)
     Lisp_Object data;
{
  XPROCESS (XCONS (data)->car)->sentinel = XCONS (data)->cdr;
  return Qnil;
}

static void
exec_sentinel (proc, reason)
     Lisp_Object proc, reason;
{
  Lisp_Object sentinel;
  register struct Lisp_Process *p = XPROCESS (proc);
  int count = specpdl_ptr - specpdl;

  sentinel = p->sentinel;
  if (NILP (sentinel))
    return;

  /* Zilch the sentinel while it's running, to avoid recursive invocations;
     assure that it gets restored no matter how the sentinel exits.  */
  p->sentinel = Qnil;
  record_unwind_protect (exec_sentinel_unwind, Fcons (proc, sentinel));
  /* Inhibit quit so that random quits don't screw up a running filter.  */
  specbind (Qinhibit_quit, Qt);
  call2 (sentinel, proc, reason);
  unbind_to (count);
}

/* Report all recent events of a change in process status
   (either run the sentinel or output a message).
   This is done while Emacs is waiting for keyboard input.  */

status_notify ()
{
  register Lisp_Object proc, buffer;
  Lisp_Object tail = Qnil;
  Lisp_Object msg = Qnil;
  struct gcpro gcpro1, gcpro2;

  /* We need to gcpro tail; if read_process_output calls a filter
     which deletes a process and removes the cons to which tail points
     from Vprocess_alist, and then causes a GC, tail is an unprotected
     reference.  */
  GCPRO2 (tail, msg);

  for (tail = Vprocess_alist; !NILP (tail); tail = Fcdr (tail))
    {
      Lisp_Object symbol;
      register struct Lisp_Process *p;

      proc = Fcdr (Fcar (tail));
      p = XPROCESS (proc);

      if (XINT (p->tick) != XINT (p->update_tick))
        {
          XSETINT (p->update_tick, XINT (p->tick));

          /* If process is still active, read any output that remains.  */
          if (XFASTINT (p->infd))
            while (read_process_output (proc, XFASTINT (p->infd)) > 0);

          buffer = p->buffer;

          /* Get the text to use for the message.  */
          if (!NILP (p->raw_status_low))
            update_status (p);
          msg = status_message (p->status);

          /* If process is terminated, deactivate it or delete it.  */
          symbol = p->status;
          if (XTYPE (p->status) == Lisp_Cons)
            symbol = XCONS (p->status)->car;

          if (EQ (symbol, Qsignal) || EQ (symbol, Qexit)
              || EQ (symbol, Qclosed))
            {
              if (delete_exited_processes)
                remove_process (proc);
              else
                deactivate_process (proc);
            }

          /* Now output the message suitably.  */
          if (!NILP (p->sentinel))
            exec_sentinel (proc, msg);
          /* Don't bother with a message in the buffer
             when a process becomes runnable.  */
          else if (!EQ (symbol, Qrun) && !NILP (buffer))
            {
              Lisp_Object ro = XBUFFER (buffer)->read_only;
              Lisp_Object tem;
              struct buffer *old = current_buffer;
              int opoint;

              /* Avoid error if buffer is deleted
                 (probably that's why the process is dead, too) */
              if (NILP (XBUFFER (buffer)->name))
                continue;
              Fset_buffer (buffer);
              opoint = point;
              /* Insert new output into buffer
                 at the current end-of-output marker,
                 thus preserving logical ordering of input and output.  */
              if (XMARKER (p->mark)->buffer)
                SET_PT (marker_position (p->mark));
              else
                SET_PT (ZV);
              if (point <= opoint)
                opoint += XSTRING (msg)->size + XSTRING (p->name)->size + 10;

              tem = current_buffer->read_only;
              current_buffer->read_only = Qnil;
              insert_string ("\nProcess ");
              Finsert (1, &p->name);
              insert_string (" ");
              Finsert (1, &msg);
              current_buffer->read_only = tem;
              Fset_marker (p->mark, make_number (point), p->buffer);

              SET_PT (opoint);
              set_buffer_internal (old);
            }
        }
    } /* end for */

  update_mode_lines++;  /* in case buffers use %s in mode-line-format */
  redisplay_preserve_echo_area ();

  update_tick = process_tick;

  UNGCPRO;
}
\f
init_process ()
{
  register int i;

#ifdef SIGCHLD
#ifndef CANNOT_DUMP
  if (! noninteractive || initialized)
#endif
    signal (SIGCHLD, sigchld_handler);
#endif

  FD_ZERO (&input_wait_mask);
  FD_SET (0, &input_wait_mask);
  Vprocess_alist = Qnil;
  for (i = 0; i < MAXDESC; i++)
    {
      chan_process[i] = Qnil;
      proc_buffered_char[i] = -1;
    }
}
#ifdef 0
DEFUN ("process-connection", Fprocess_connection, Sprocess_connection, 0, 1, 0,
 "Return the connection type of `PROCESS'.  This can be nil (pipe),\n\
t or pty (pty) or stream (socket connection).")
  (process)
     Lisp_Object process;
{
  return XPROCESS (process)->type;
}
#endif
syms_of_process ()
{
#ifdef HAVE_PTYS
  pty_process = intern ("pty");
#endif
#ifdef HAVE_SOCKETS
  stream_process = intern ("stream");
#endif
  Qprocessp = intern ("processp");
  staticpro (&Qprocessp);
  Qrun = intern ("run");
  staticpro (&Qrun);
  Qstop = intern ("stop");
  staticpro (&Qstop);
  Qsignal = intern ("signal");
  staticpro (&Qsignal);

  /* Qexit is already staticpro'd by syms_of_eval; don't staticpro it
     here again.

     Qexit = intern ("exit");
     staticpro (&Qexit); */

  Qopen = intern ("open");
  staticpro (&Qopen);
  Qclosed = intern ("closed");
  staticpro (&Qclosed);

  staticpro (&Vprocess_alist);

  DEFVAR_BOOL ("delete-exited-processes", &delete_exited_processes,
    "*Non-nil means delete processes immediately when they exit.\n\
nil means don't delete them until `list-processes' is run.");

  delete_exited_processes = 1;

  DEFVAR_LISP ("process-connection-type", &Vprocess_connection_type,
    "Control type of device used to communicate with subprocesses.\n\
Values are nil to use a pipe, and t or 'pty for a pty.  Note that if\n\
pty's are not available, this variable will be ignored. The value takes\n\
effect when `start-process' is called.");
  Vprocess_connection_type = Qt;

  defsubr (&Sprocessp);
  defsubr (&Sget_process);
  defsubr (&Sget_buffer_process);
  defsubr (&Sdelete_process);
  defsubr (&Sprocess_status);
  defsubr (&Sprocess_exit_status);
  defsubr (&Sprocess_id);
  defsubr (&Sprocess_name);
  defsubr (&Sprocess_command);
  defsubr (&Sset_process_buffer);
  defsubr (&Sprocess_buffer);
  defsubr (&Sprocess_mark);
  defsubr (&Sset_process_filter);
  defsubr (&Sprocess_filter);
  defsubr (&Sset_process_sentinel);
  defsubr (&Sprocess_sentinel);
  defsubr (&Sprocess_kill_without_query);
  defsubr (&Slist_processes);
  defsubr (&Sprocess_list);
  defsubr (&Sstart_process);
#ifdef HAVE_SOCKETS
  defsubr (&Sopen_network_stream);
#endif /* HAVE_SOCKETS */
  defsubr (&Saccept_process_output);
  defsubr (&Sprocess_send_region);
  defsubr (&Sprocess_send_string);
  defsubr (&Sinterrupt_process);
  defsubr (&Skill_process);
  defsubr (&Squit_process);
  defsubr (&Sstop_process);
  defsubr (&Scontinue_process);
  defsubr (&Sprocess_send_eof);
  defsubr (&Ssignal_process);
  defsubr (&Swaiting_for_user_input_p);
/*  defsubr (&Sprocess_connection); */
}

\f
#else /* not subprocesses */

#include <sys/types.h>
#include <errno.h>

#include "lisp.h"
#include "systime.h"
#include "termopts.h"

extern int screen_garbaged;


/* As described above, except assuming that there are no subprocesses:

   Wait for timeout to elapse and/or keyboard input to be available.

   time_limit is:
     timeout in seconds, or
     zero for no limit, or
     -1 means gobble data immediately available but don't wait for any.

   read_kbd is:
     0 to ignore keyboard input, or
     1 to return when input is available, or
     -1 means caller will actually read the input, so don't throw to
       the quit handler.
     We know that read_kbd will never be a Lisp_Process, since
     `subprocesses' isn't defined.

   do_display != 0 means redisplay should be done to show subprocess
   output that arrives.  This version of the function ignores it.

   If read_kbd is a pointer to a struct Lisp_Process, then the
     function returns true iff we received input from that process
     before the timeout elapsed.
   Otherwise, return true iff we recieved input from any process.  */

int
wait_reading_process_input (time_limit, microsecs, read_kbd, do_display)
     int time_limit, microsecs, read_kbd, do_display;
{
  EMACS_TIME end_time, timeout, *timeout_p;
  int waitchannels;

  /* What does time_limit really mean?  */
  if (time_limit || microsecs)
    {
      /* It's not infinite.  */
      timeout_p = &timeout;

      if (time_limit == -1)
        /* In fact, it's zero.  */
        EMACS_SET_SECS_USECS (timeout, 0, 0);
      else
        EMACS_SET_SECS_USECS (timeout, time_limit, microsecs);

      /* How far in the future is that?  */
      EMACS_GET_TIME (end_time);
      EMACS_ADD_TIME (end_time, end_time, timeout);
    }
  else
    /* It's infinite.  */
    timeout_p = 0;

  /* Turn off periodic alarms (in case they are in use)
     because the select emulator uses alarms.  */
  stop_polling ();

  for (;;)
    {
      int nfds;

      waitchannels = read_kbd ? 1 : 0;

      /* If calling from keyboard input, do not quit
         since we want to return C-g as an input character.
         Otherwise, do pending quit if requested.  */
      if (read_kbd >= 0)
        QUIT;

      if (timeout_p)
        {
          EMACS_GET_TIME (*timeout_p);
          EMACS_SUB_TIME (*timeout_p, end_time, *timeout_p);
          if (EMACS_TIME_NEG_P (*timeout_p))
            break;
        }

      /* Cause C-g and alarm signals to take immediate action,
         and cause input available signals to zero out timeout.  */
      if (read_kbd < 0)
        set_waiting_for_input (&timeout);

      /* If a screen has been newly mapped and needs updating,
         reprocess its display stuff.  */
      if (screen_garbaged)
        redisplay_preserve_echo_area ();

      if (read_kbd && detect_input_pending ())
        nfds = 0;
      else
        nfds = select (1, &waitchannels, 0, 0, timeout_p);

      /* Make C-g and alarm signals set flags again */
      clear_waiting_for_input ();

      /*  If we woke up due to SIGWINCH, actually change size now.  */
      do_pending_window_change ();

      if (nfds == -1)
        {
          /* If the system call was interrupted, then go around the
             loop again.  */
          if (errno == EINTR)
            waitchannels = 0;
        }
#ifdef sun
      else if (nfds > 0 && (waitchannels & 1)  && interrupt_input)
        /* System sometimes fails to deliver SIGIO.  */
        kill (getpid (), SIGIO);
#endif
      if (read_kbd && interrupt_input && (waitchannels & 1))
        kill (0, SIGIO);

      /* If we have timed out (nfds == 0) or found some input (nfds > 0),
         we should exit.  */
      if (nfds >= 0)
        break;
    }

  return 0;
}


DEFUN ("get-buffer-process", Fget_buffer_process, Sget_buffer_process, 1, 1, 0,
  "Return the (or, a) process associated with BUFFER.\n\
This copy of Emacs has not been built to support subprocesses, so this\n\
function always returns nil.")
  (name)
     register Lisp_Object name;
{
  return Qnil;
}

/* Kill all processes associated with `buffer'.
   If `buffer' is nil, kill all processes.
   Since we have no subprocesses, this does nothing.  */

kill_buffer_processes (buffer)
     Lisp_Object buffer;
{
}

init_process ()
{
}

syms_of_process ()
{
  defsubr (&Sget_buffer_process);
}

\f
#endif /* not subprocesses */