Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
   6 #   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
   7 #   Free Software Foundation, Inc.
   8
   9 # This file is part of GNU Emacs.
  10
  11 # GNU Emacs is free software: you can redistribute it and/or modify
  12 # it under the terms of the GNU General Public License as published by
  13 # the Free Software Foundation, either version 3 of the License, or
  14 # (at your option) any later version.
  15
  16 # GNU Emacs is distributed in the hope that it will be useful,
  17 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  18 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19 # GNU General Public License for more details.
  20
  21 # You should have received a copy of the GNU General Public License
  22 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
  23
  24 ### Commentary:
  25
  26 # make all      to compile and build Emacs.
  27 # make install  to install it.
  28 # make TAGS     to update tags tables.
  29 #
  30 # make clean  or  make mostlyclean
  31 #      Delete all files from the current directory that are normally
  32 #      created by building the program.  Don't delete the files that
  33 #      record the configuration.  Also preserve files that could be made
  34 #      by building, but normally aren't because the distribution comes
  35 #      with them.
  36 #
  37 #      Delete `.dvi' files here if they are not part of the distribution.
  38 #
  39 # make distclean
  40 #      Delete all files from the current directory that are created by
  41 #      configuring or building the program.  If you have unpacked the
  42 #      source and built the program without creating any other files,
  43 #      `make distclean' should leave only the files that were in the
  44 #      distribution.
  45 #
  46 # make maintainer-clean
  47 #      Delete everything from the current directory that can be
  48 #      reconstructed with this Makefile.  This typically includes
  49 #      everything deleted by distclean, plus more: .elc files,
  50 #      C source files produced by Bison, tags tables, info files,
  51 #      and so on.
  52 #
  53 # make extraclean
  54 #      Still more severe - delete backup and autosave files, too.
  55 #
  56 # make bootstrap
  57 #      Removes all the compiled files to force a new bootstrap from a
  58 #      clean slate, and then build in the normal way.
  59
  60 SHELL = /bin/sh
  61
  62 # This may not work with certain non-GNU make's.  It only matters when
  63 # inheriting a CDPATH not starting with the current directory.
  64 CDPATH=
  65
  66 # If Make doesn't predefine MAKE, set it here.
  67 @SET_MAKE@
  68
  69 # ==================== Things `configure' Might Edit ====================
  70
  71 CC=@CC@
  72 CFLAGS=@CFLAGS@
  73 LDFLAGS=@LDFLAGS@
  74 CPPFLAGS=@CPPFLAGS@
  75 EXEEXT=@EXEEXT@
  76
  77 ### These help us choose version- and architecture-specific directories
  78 ### to install files in.
  79
  80 ### This should be the number of the Emacs version we're building,
  81 ### like `18.59' or `19.0'.
  82 version=@version@
  83
  84 ### This should be the name of the configuration we're building Emacs
  85 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  86 configuration=@configuration@
  87
  88 # ==================== Where To Install Things ====================
  89
  90 # The default location for installation.  Everything is placed in
  91 # subdirectories of this directory.  The default values for many of
  92 # the variables below are expressed in terms of this one, so you may
  93 # not need to change them.  This defaults to /usr/local.
  94 prefix=@prefix@
  95
  96 # Like `prefix', but used for architecture-specific files.
  97 exec_prefix=@exec_prefix@
  98
  99 # Where to install Emacs and other binaries that people will want to
 100 # run directly (like etags).
 101 bindir=@bindir@
 102
 103 # The root of the directory tree for read-only architecture-independent
 104 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 105 datarootdir=@datarootdir@
 106
 107 # Where to install architecture-independent data files.  ${lispdir}
 108 # and ${etcdir} are subdirectories of this.
 109 datadir=@datadir@
 110
 111 # Where to install and expect the files that Emacs modifies as it
 112 # runs.  These files are all architecture-independent.
 113 # Right now, this is not used.
 114 sharedstatedir=@sharedstatedir@
 115
 116 # Where to install and expect executable files to be run by Emacs
 117 # rather than directly by users, and other architecture-dependent
 118 # data.  ${archlibdir} is a subdirectory of this.
 119 libexecdir=@libexecdir@
 120
 121 # Where to install Emacs's man pages.
 122 # This used to allow choice of the numeric extension, but this made
 123 # little sense since the files were always installed in man1/
 124 # (and they contain cross-references that expect them to be there).
 125 mandir=@mandir@
 126 man1dir=$(mandir)/man1
 127 MAN_PAGES=ctags.1 ebrowse.1 emacs.1 emacsclient.1 etags.1 \
 128           grep-changelog.1 rcs-checkin.1
 129
 130 # Where to install and expect the info files describing Emacs.  In the
 131 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
 132 # since there are now many packages documented with the texinfo
 133 # system, it is inappropriate to imply that it is part of Emacs.
 134 infodir=@infodir@
 135 INFO_FILES=ada-mode auth autotype calc ccmode cl dbus dired-x ebrowse   \
 136            ede ediff edt eieio efaq eintr elisp emacs emacs-mime epa erc \
 137            eshell eudc flymake forms gnus idlwave info mairix-el        \
 138            message mh-e newsticker nxml-mode org pcl-cvs pgg rcirc      \
 139            reftex remember sasl sc semantic ses sieve smtpmail speedbar \
 140            tramp url vip viper widget woman
 141
 142 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
 143 HAVE_MAKEINFO=@HAVE_MAKEINFO@
 144
 145 # Directory for local state files for all programs.
 146 localstatedir=@localstatedir@
 147
 148 # Where to look for bitmap files.
 149 bitmapdir=@bitmapdir@
 150
 151 # Where to find the source code.  The source code for Emacs's C kernel is
 152 # expected to be in ${srcdir}/src, and the source code for Emacs's
 153 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 154 # set by the configure script's `--srcdir' option.
 155
 156 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 157 srcdir=@srcdir@
 158
 159 # Where the manpage source files are kept.
 160 mansrcdir=$(srcdir)/doc/man
 161
 162 # Tell make where to find source files; this is needed for the makefiles.
 163 VPATH=@srcdir@
 164
 165 # Where to find the application default.
 166 x_default_search_path=@x_default_search_path@
 167
 168 # Location to install Emacs.app under NeXT/Open/GNUstep / Cocoa
 169 ns_appbindir=@ns_appbindir@
 170 ns_appresdir=@ns_appresdir@
 171
 172 # Where the etc/emacs.desktop file is to be installed.
 173 desktopdir=$(datarootdir)/applications
 174
 175 # Where the etc/images/icons/hicolor directory is to be installed.
 176 icondir=$(datarootdir)/icons
 177
 178 # The source directory for the icon files.
 179 iconsrcdir=$(srcdir)/etc/images/icons
 180
 181 # ==================== Emacs-specific directories ====================
 182
 183 # These variables hold the values Emacs will actually use.  They are
 184 # based on the values of the standard Make variables above.
 185
 186 # Where to install the lisp files distributed with
 187 # Emacs.  This includes the Emacs version, so that the
 188 # lisp files for different versions of Emacs will install
 189 # themselves in separate directories.
 190 lispdir=@lispdir@
 191
 192 # Directories Emacs should search for lisp files specific
 193 # to this site (i.e. customizations), before consulting
 194 # ${lispdir}.  This should be a colon-separated list of
 195 # directories.
 196 locallisppath=@locallisppath@
 197
 198 # Where Emacs will search to find its lisp files.  Before
 199 # changing this, check to see if your purpose wouldn't
 200 # better be served by changing locallisppath.  This
 201 # should be a colon-separated list of directories.
 202 lisppath=@lisppath@
 203
 204 # Where Emacs will search for its lisp files while
 205 # building.  This is only used during the process of
 206 # compiling Emacs, to help Emacs find its lisp files
 207 # before they've been installed in their final location.
 208 # It's usually identical to lisppath, except that
 209 # it does not include locallisppath, and the
 210 # entry for the directory containing the installed lisp
 211 # files has been replaced with ../lisp.  This should be a
 212 # colon-separated list of directories.
 213 buildlisppath=${srcdir}/lisp
 214
 215 # Where to install the other architecture-independent
 216 # data files distributed with Emacs (like the tutorial,
 217 # the cookie recipes and the Zippy database). This path
 218 # usually contains the Emacs version number, so the data
 219 # files for multiple versions of Emacs may be installed
 220 # at once.
 221 etcdir=@etcdir@
 222
 223 # Where to put executables to be run by Emacs rather than
 224 # the user.  This path usually includes the Emacs version
 225 # and configuration name, so that multiple configurations
 226 # for multiple versions of Emacs may be installed at
 227 # once.
 228 archlibdir=@archlibdir@
 229
 230 # Where to put the docstring file.
 231 docdir=@docdir@
 232
 233 # Where to install Emacs game score files.
 234 gamedir=@gamedir@
 235
 236 # ==================== Utility Programs for the Build ====================
 237
 238 # Allow the user to specify the install program.
 239 INSTALL = @INSTALL@
 240 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 241 INSTALL_DATA = @INSTALL_DATA@
 242 INSTALL_INFO = @INSTALL_INFO@
 243 # By default, we uphold the dignity of our programs.
 244 INSTALL_STRIP =
 245
 246 # We use gzip to compress installed .el files.
 247 GZIP_PROG = @GZIP_PROG@
 248 # If non-nil, gzip the installed Info and man pages.
 249 GZIP_INFO = @GZIP_INFO@
 250
 251 # ============================= Targets ==============================
 252
 253 # Program name transformation.
 254 TRANSFORM = @program_transform_name@
 255
 256 # What emacs should be called when installed.
 257 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
 258 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
 259
 260 # Subdirectories to make recursively.  `lisp' is not included
 261 # because the compiled lisp files are part of the distribution.
 262 # leim is not included because it needs special handling.
 263 #
 264 # Actually, we now include `lisp' as well, since the compiled files
 265 # are not included any more in case of bootstrap or in case Emacs was
 266 # checked out from a VCS.
 267 SUBDIR = lib-src src lisp
 268
 269 # The subdir makefiles created by config.status.
 270 SUBDIR_MAKEFILES = lib-src/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispref/Makefile doc/lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile lisp/Makefile
 271
 272 # Subdirectories to install, and where they'll go.
 273 # lib-src's makefile knows how to install it, so we don't do that here.
 274 # leim's makefile also knows how to install it, so we don't do that here.
 275 # When installing the info files, we need to do special things to
 276 # avoid nuking an existing dir file, so we don't do that here;
 277 # instead, we have written out explicit code in the `install' targets.
 278 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 279 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
 280
 281 all: ${SUBDIR} leim
 282
 283 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
 284
 285 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 286 # See comments in configure.in for why it is done this way, as opposed
 287 # to just letting configure generate epaths.h from epaths.in in a
 288 # similar way to how Makefile is made from Makefile.in.
 289 epaths-force: FRC
 290         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 291           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 292           x_default_search_path=`echo ${x_default_search_path}`; \
 293           gamedir=`echo ${gamedir}`; \
 294           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 295           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";'      \
 296           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 297           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 298           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 299           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 300           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 301           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 302           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 303           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
 304           -e 's;/[*] *arch-tag:.*;/*;') &&              \
 305         ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
 306
 307 # For parallel make, src should be built before leim.
 308 # "export PARALLEL=0" is for SGI's Make, to prevent it from
 309 # running more than 1 process in the leim directory, especially for
 310 # the $TIT files there.
 311 leim:   src Makefile FRC
 312         (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
 313           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 314           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
 315
 316 src:    lib-src FRC
 317
 318 .RECURSIVE: ${SUBDIR} leim
 319
 320 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
 321 lisp: src
 322
 323 # These targets should be "${SUBDIR} without `src'".
 324 lib-src lisp: Makefile FRC
 325         cd $@; $(MAKE) all $(MFLAGS)                           \
 326           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 327           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 328
 329 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
 330 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
 331 # constructed yet) or the empty string (otherwise).
 332 # src/Makefile.in uses it to implement conditional dependencies, so that
 333 # files that need bootstrap-emacs to be built do not additionally need
 334 # to be kept fresher than bootstrap-emacs.  Otherwise changing a single
 335 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
 336 # all preloaded elisp files, and only then dump the actual src/emacs, which
 337 # is not wrong, but is overkill in 99.99% of the cases.
 338 src: Makefile FRC
 339         boot=bootstrap-emacs$(EXEEXT);                         \
 340         if [ ! -x "src/$$boot" ]; then                                     \
 341             cd $@; $(MAKE) all $(MFLAGS)                                   \
 342               CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}'         \
 343               LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \
 344         fi;
 345         if [ -r .bzr/checkout/dirstate ]; then                  \
 346             vcswitness="$$(pwd)/.bzr/checkout/dirstate";        \
 347         fi;                                                     \
 348         cd $@; $(MAKE) all $(MFLAGS)                           \
 349           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 350           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="" \
 351           VCSWITNESS="$$vcswitness"
 352
 353 blessmail: Makefile src FRC
 354         cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
 355           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 356
 357 # We used to have one rule per */Makefile.in, but that leads to race
 358 # conditions with parallel makes, so let's assume that the time stamp on
 359 # ./Makefile is representative of the time stamp on all the other Makefiles.
 360 Makefile: config.status $(srcdir)/src/config.in \
 361           $(srcdir)/Makefile.in \
 362           $(srcdir)/src/Makefile.in \
 363           $(srcdir)/lib-src/Makefile.in \
 364           $(srcdir)/doc/emacs/Makefile.in \
 365           $(srcdir)/doc/misc/Makefile.in \
 366           $(srcdir)/doc/lispref/Makefile.in \
 367           $(srcdir)/doc/lispintro/Makefile.in \
 368           $(srcdir)/oldXMenu/Makefile.in \
 369           $(srcdir)/lwlib/Makefile.in \
 370           $(srcdir)/leim/Makefile.in \
 371           $(srcdir)/lisp/Makefile.in
 372         ./config.status
 373
 374 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 375         ./config.status --recheck
 376
 377 AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/m4/getopt.m4
 378
 379 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 380         cd ${srcdir} && autoconf
 381
 382 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 383         @ # Usually, there's no need to rebuild src/config.in just
 384         @ # because stamp-h.in has changed (since building stamp-h.in
 385         @ # refreshes config.in as well), but if config.in is missing
 386         @ # then we really need to do something more.
 387         [ -r "$@" ] || ( cd ${srcdir} && autoheader )
 388 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 389         cd ${srcdir} && autoheader
 390         rm -f $(srcdir)/src/stamp-h.in
 391         echo timestamp > $(srcdir)/src/stamp-h.in
 392
 393 # ==================== Installation ====================
 394
 395 ## If we let lib-src do its own installation, that means we
 396 ## don't have to duplicate the list of utilities to install in
 397 ## this Makefile as well.
 398
 399 ## On AIX, use tar xBf.
 400 ## On Xenix, use tar xpf.
 401
 402 .PHONY: install mkdir
 403
 404 ## We delete each directory in ${COPYDESTS} before we copy into it;
 405 ## that way, we can reinstall over directories that have been put in
 406 ## place with their files read-only (perhaps because they are checked
 407 ## into RCS).  In order to make this safe, we make sure that the
 408 ## source exists and is distinct from the destination.
 409 ### We do install-arch-indep first because
 410 ### the executable needs the Lisp files and DOC file to work properly.
 411 install: all install-arch-indep install-arch-dep install-leim blessmail
 412         @true
 413
 414 MV_DIRS = for i in $$dir; do rm -fr `basename "$$i"` ; mv "$$i" . ; done
 415
 416 ### Install the executables that were compiled specifically for this machine.
 417 ### It would be nice to do something for a parallel make
 418 ### to ensure that install-arch-indep finishes before this starts.
 419 install-arch-dep: mkdir
 420         (cd lib-src; \
 421           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 422             exec_prefix=${exec_prefix} bindir=${bindir} \
 423             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 424             INSTALL_STRIP=${INSTALL_STRIP})
 425         ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
 426         -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
 427         rm -f $(DESTDIR)${bindir}/$(EMACS)
 428         -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
 429         if test "${ns_appresdir}" != ""; then \
 430           ( cd ${ns_appresdir} ; \
 431             if test -d share/emacs ; then dir=share/emacs/*/*; $(MV_DIRS); fi;\
 432             if test -d share/info ; then dir=share/info; $(MV_DIRS) ; fi ; \
 433             rm -fr share ) ; \
 434           ( cd ${ns_appbindir}libexec ; dir=emacs/*/*/* ; $(MV_DIRS); \
 435             rm -fr emacs ) ; \
 436           ( cd ${ns_appbindir}bin ; rm -f emacs emacs-24* ; \
 437             ln -sf ../libexec/* .) ; \
 438         else true ; fi
 439
 440 ## FIXME is the emacs-24* bit above really necessary and correct?
 441 ## What if I have 24.1 and 24.2 installed at the same time?
 442 ## In any case, it should use something like echo $version | sed 's/\..*//'
 443 ## instead of hard-coding a version.
 444
 445 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 446 ## Needs to be the user running install, so configure can't set it.
 447 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 448           `id -un 2> /dev/null`; do \
 449           [ -n "$${installuser}" ] && break ; \
 450         done
 451
 452 ### Install the files that are machine-independent.
 453 ### Most of them come straight from the distribution;
 454 ### the exception is the DOC-* files, which are copied
 455 ### from the build directory.
 456
 457 ## Note that we copy DOC* and then delete DOC
 458 ## as a workaround for a bug in tar on Ultrix 4.2.
 459
 460 ## We install only the relevant DOC file if possible
 461 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
 462
 463 ## If people complain about the h flag in tar command, take that out.
 464 ## That flag is also used in leim/Makefile.in
 465
 466 ## Note that the Makefiles in the etc directory are potentially useful
 467 ## in an installed Emacs, so should not be excluded.
 468
 469 install-arch-indep: mkdir info install-etc
 470         -set ${COPYDESTS} ; \
 471         unset CDPATH; \
 472         for dir in ${COPYDIR} ; do \
 473           if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
 474             rm -rf $$1 ; \
 475           fi ; \
 476           shift ; \
 477         done
 478         -set ${COPYDESTS} ; \
 479         mkdir ${COPYDESTS} ; \
 480         chmod ugo+rx ${COPYDESTS} ; \
 481         unset CDPATH; \
 482         $(set_installuser); \
 483         for dir in ${COPYDIR} ; do \
 484           dest=$$1 ; shift ; \
 485           [ -d $${dir} ] \
 486           && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
 487           && (echo "Copying $${dir} to $${dest}..." ; \
 488               (cd $${dir}; tar -chf - . ) \
 489                 | (cd $${dest}; umask 022; \
 490                    tar -xvf - && cat > /dev/null) || exit 1; \
 491               find $${dest} -exec chown $${installuser} {} ';' ;\
 492               for subdir in `find $${dest} -type d -print` ; do \
 493                 chmod a+rx $${subdir} ; \
 494                 rm -f  $${subdir}/.gitignore ; \
 495                 rm -f  $${subdir}/.arch-inventory ; \
 496                 rm -f  $${subdir}/.DS_Store ; \
 497                 rm -f  $${subdir}/\#* ; \
 498                 rm -f  $${subdir}/.\#* ; \
 499                 rm -f  $${subdir}/*~ ; \
 500                 rm -f  $${subdir}/*.orig ; \
 501                 [ "$${dir}" != "${srcdir}/etc" ] && \
 502                  rm -f $${subdir}/[mM]akefile*.c $${subdir}/[mM]akefile*[.-]in \
 503                    $${subdir}/[mM]akefile ; \
 504                 rm -f  $${subdir}/ChangeLog* ; \
 505               done) ; \
 506         done
 507         -rm -f $(DESTDIR)${lispdir}/subdirs.el
 508         $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
 509         if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
 510         then true; \
 511         else \
 512           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 513            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 514             > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
 515         fi
 516         chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
 517         -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
 518         then true; \
 519         else \
 520           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 521            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 522             > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
 523         fi
 524         -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
 525         -unset CDPATH; \
 526         if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
 527         then \
 528            fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
 529            if [ -f "./etc/DOC-$${fullversion}" ]; \
 530            then \
 531              docfile="DOC-$${fullversion}"; \
 532            else \
 533              docfile="DOC"; \
 534            fi; \
 535            echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
 536            (cd ./etc; tar -chf - $${docfile}) \
 537              |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 538            (cd $(DESTDIR)$(docdir); \
 539             $(set_installuser); \
 540             chown $${installuser} DOC*; chmod a+r DOC*; \
 541             if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
 542         else true; fi
 543         -unset CDPATH; \
 544         if [ -r ./lisp ] \
 545            && [ -r ./lisp/simple.el ] \
 546            && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \
 547            && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
 548         then \
 549            echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \
 550            (cd lisp; tar -chf - *.el *.elc) \
 551              |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 552            (cd $(DESTDIR)${lispdir}; \
 553             $(set_installuser); \
 554             find . -exec chown $${installuser} {} ';') ; \
 555         else true; fi
 556         -unset CDPATH; \
 557         if [ -n "${GZIP_PROG}" ]; \
 558         then \
 559            echo "Compressing *.el ..." ; \
 560            (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
 561                 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
 562             done) \
 563         else true; fi
 564         -unset CDPATH; \
 565         thisdir=`/bin/pwd`; \
 566         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 567         then \
 568           (cd $(DESTDIR)${infodir};  \
 569            if [ -f dir ]; then true; \
 570            else \
 571              (cd $${thisdir}; \
 572               ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
 573               chmod a+r $(DESTDIR)${infodir}/dir); \
 574            fi; \
 575            cd ${srcdir}/info ; \
 576            for elt in $(INFO_FILES); do \
 577               test "$(HAVE_MAKEINFO)" = "no" && ! test -e $$elt && continue; \
 578               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 579                 ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \
 580                 chmod a+r $(DESTDIR)${infodir}/$$f; \
 581                 if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 582                   rm -f $(DESTDIR)${infodir}/$$f.gz; \
 583                   ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
 584                 else true; fi; \
 585               done; \
 586            done); \
 587         else true; fi
 588         -unset CDPATH; \
 589         thisdir=`/bin/pwd`; \
 590         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 591         then \
 592           for elt in $(INFO_FILES); do \
 593             test "$(HAVE_MAKEINFO)" = "no" && ! test -e $$elt && continue; \
 594             (cd $${thisdir}; \
 595              ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 596           done; \
 597         else true; fi
 598         -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
 599         thisdir=`/bin/pwd`; \
 600         cd ${mansrcdir}; \
 601         for page in ${MAN_PAGES}; do \
 602           (cd $${thisdir}; \
 603            ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}; \
 604            chmod a+r $(DESTDIR)${man1dir}/$${page}; \
 605            if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 606              rm -f $(DESTDIR)${man1dir}/$${page}.gz; \
 607              ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \
 608            else true; fi ); \
 609         done
 610
 611 ## Install those items from etc/ that need to end up elsewhere.
 612 install-etc: mkdir
 613         ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
 614           $(DESTDIR)${desktopdir}/emacs.desktop
 615         for icon in $(iconsrcdir)/*/*/apps/*.* \
 616           $(iconsrcdir)/*/*/mimetypes/*.*; do \
 617           if [ -r $${icon} ]; then \
 618             iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
 619             ${INSTALL_DATA} $${icon} $${iicon} ; \
 620           fi ; \
 621         done
 622
 623 ### Install LEIM files.  Although they are machine-independent, we
 624 ### have separate target here instead of including it in
 625 ### `install-arch-indep'.  People who extracted LEIM files after they
 626 ### insalled Emacs itself can install only LEIM files by this target.
 627 install-leim: leim/Makefile mkdir
 628         cd leim; $(MAKE) install
 629
 630 ### Build Emacs and install it, stripping binaries while installing them.
 631 install-strip:
 632         $(MAKE) INSTALL_STRIP=-s install
 633
 634 ### Build all the directories we're going to install Emacs in.  Since
 635 ### we may be creating several layers of directories (for example,
 636 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
 637 ### instead of mkdir.  Not all systems' mkdir programs have the `-p' flag.
 638 ### We set the umask so that any created directories are world-readable.
 639 ### FIXME it would be good to warn about non-standard permissions of
 640 ### pre-existing directories, but that does not seem easy.
 641 mkdir: FRC
 642         icondirs= ; \
 643         for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \
 644           if [ -d $${dir} ]; then \
 645             icondirs="$${icondirs} $${dir}" ; \
 646           fi ; \
 647         done ; \
 648         icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
 649         umask 022 ; \
 650         $(srcdir)/mkinstalldirs $(DESTDIR)${datadir} ${COPYDESTS} \
 651           $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
 652           $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
 653           $(DESTDIR)${datadir}/emacs/site-lisp \
 654           $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
 655           $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
 656           $(DESTDIR)${desktopdir} $${icondirs}
 657
 658 ### Delete all the installed files that the `install' target would
 659 ### create (but not the noninstalled files such as `make all' would create).
 660 ###
 661 ### Don't delete the lisp and etc directories if they're in the source tree.
 662 uninstall:
 663         (cd lib-src;                                    \
 664          $(MAKE) $(MFLAGS) uninstall                    \
 665             prefix=${prefix} exec_prefix=${exec_prefix} \
 666             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
 667         -unset CDPATH; \
 668         for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do        \
 669           if [ -d $${dir} ]; then                       \
 670             case `(cd $${dir} ; /bin/pwd)` in           \
 671               `(cd ${srcdir} ; /bin/pwd)`* ) ;;         \
 672               * ) rm -rf $${dir} ;;                     \
 673             esac ;                                      \
 674             case $${dir} in                             \
 675               $(DESTDIR)${datadir}/emacs/${version}/* )         \
 676                 rm -rf $(DESTDIR)${datadir}/emacs/${version}    \
 677               ;;                                        \
 678             esac ;                                      \
 679           fi ;                                          \
 680         done
 681         -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
 682         (cd $(DESTDIR)${infodir} && \
 683           for elt in $(INFO_FILES); do \
 684             $(INSTALL_INFO) --remove --info-dir=. $$elt; \
 685             for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 686               rm -f $$f; \
 687             done; \
 688           done;)
 689         (cd $(DESTDIR)${man1dir}  && rm -f $(MAN_PAGES))
 690         (cd $(DESTDIR)${bindir}  && rm -f $(EMACSFULL) $(EMACS))
 691         (cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg )
 692         -rm -f $(DESTDIR)${desktopdir}/emacs.desktop
 693         for file in snake-scores tetris-scores; do \
 694           file=$(DESTDIR)${gamedir}/$${file}; \
 695           [ -s $${file} ] || rm -f $$file; \
 696         done
 697
 698 FRC:
 699
 700 # ==================== Cleaning up and miscellanea ====================
 701
 702 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
 703
 704 ### `mostlyclean'
 705 ###      Like `clean', but may refrain from deleting a few files that people
 706 ###      normally don't want to recompile.  For example, the `mostlyclean'
 707 ###      target for GCC does not delete `libgcc.a', because recompiling it
 708 ###      is rarely necessary and takes a lot of time.
 709 mostlyclean: FRC
 710         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 711         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 712         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 713         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 714         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) mostlyclean)
 715         -(cd doc/misc &&   $(MAKE) $(MFLAGS) mostlyclean)
 716         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) mostlyclean)
 717         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)
 718         (cd leim;     $(MAKE) $(MFLAGS) mostlyclean)
 719
 720 ### `clean'
 721 ###      Delete all files from the current directory that are normally
 722 ###      created by building the program.  Don't delete the files that
 723 ###      record the configuration.  Also preserve files that could be made
 724 ###      by building, but normally aren't because the distribution comes
 725 ###      with them.
 726 ###
 727 ###      Delete `.dvi' files here if they are not part of the distribution.
 728 clean: FRC
 729         (cd src;      $(MAKE) $(MFLAGS) clean)
 730         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 731         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 732         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 733         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 734         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 735         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 736         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 737         (cd leim;     $(MAKE) $(MFLAGS) clean)
 738
 739 ### `bootclean'
 740 ###      Delete all files that need to be remade for a clean bootstrap.
 741 top_bootclean=\
 742         rm -f config.cache config.log
 743 ### `distclean'
 744 ###      Delete all files from the current directory that are created by
 745 ###      configuring or building the program.  If you have unpacked the
 746 ###      source and built the program without creating any other files,
 747 ###      `make distclean' should leave only the files that were in the
 748 ###      distribution.
 749 top_distclean=\
 750         ${top_bootclean}; \
 751         rm -f config.status Makefile ${SUBDIR_MAKEFILES}
 752 distclean: FRC
 753         (cd src;      $(MAKE) $(MFLAGS) distclean)
 754         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 755         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 756         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 757         (cd doc/emacs &&    $(MAKE) $(MFLAGS) distclean)
 758         (cd doc/misc &&    $(MAKE) $(MFLAGS) distclean)
 759         (cd doc/lispref &&    $(MAKE) $(MFLAGS) distclean)
 760         (cd doc/lispintro &&    $(MAKE) $(MFLAGS) distclean)
 761         (cd leim;     $(MAKE) $(MFLAGS) distclean)
 762         (cd lisp;     $(MAKE) $(MFLAGS) distclean)
 763         ${top_distclean}
 764
 765 ### `bootstrap-clean'
 766 ###      Delete everything that can be reconstructed by `make' and that
 767 ###      needs to be deleted in order to force a bootstrap from a clean state.
 768 bootstrap-clean: FRC
 769         (cd src;      $(MAKE) $(MFLAGS) bootstrap-clean)
 770         (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
 771         (cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)
 772         (cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)
 773         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) maintainer-clean)
 774         -(cd doc/misc &&   $(MAKE) $(MFLAGS) maintainer-clean)
 775         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)
 776         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)
 777         (cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)
 778         (cd lisp;     $(MAKE) $(MFLAGS) bootstrap-clean)
 779         ${top_bootclean}
 780
 781 ### `maintainer-clean'
 782 ###      Delete everything from the current directory that can be
 783 ###      reconstructed with this Makefile.  This typically includes
 784 ###      everything deleted by distclean, plus more: C source files
 785 ###      produced by Bison, tags tables, info files, and so on.
 786 ###
 787 ###      One exception, however: `make maintainer-clean' should not delete
 788 ###      `configure' even if `configure' can be remade using a rule in the
 789 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 790 ###      anything that needs to exist in order to run `configure' and then
 791 ###      begin to build the program.
 792 maintainer-clean: bootstrap-clean FRC
 793         (cd src;      $(MAKE) $(MFLAGS) maintainer-clean)
 794         (cd lisp;     $(MAKE) $(MFLAGS) maintainer-clean)
 795         ${top_distclean}
 796
 797 ### This doesn't actually appear in the coding standards, but Karl
 798 ### says GCC supports it, and that's where the configuration part of
 799 ### the coding standards seem to come from.  It's like distclean, but
 800 ### it deletes backup and autosave files too.
 801 extraclean:
 802         for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 803         ${top_distclean}
 804         -rm -f config-tmp-*
 805         -rm -f *~ \#*
 806
 807 # The src subdir knows how to do the right thing
 808 # even when the build directory and source dir are different.
 809 TAGS tags: lib-src src
 810         cd src; $(MAKE) tags
 811
 812 check:
 813         @echo "We don't have any tests for GNU Emacs yet."
 814
 815 dist:
 816         cd ${srcdir}; ./make-dist
 817
 818 .PHONY: info dvi dist check html
 819
 820 info-real:
 821         (cd doc/emacs; $(MAKE) $(MFLAGS) info)
 822         (cd doc/misc; $(MAKE) $(MFLAGS) info)
 823         (cd doc/lispref; $(MAKE) $(MFLAGS) info)
 824         (cd doc/lispintro; $(MAKE) $(MFLAGS) info)
 825
 826 force-info:
 827 # Note that man/Makefile knows how to put the info files in $(srcdir),
 828 # so we can do ok running make in the build dir.
 829 # This used to have a clause that exited with an error if MAKEINFO = no.
 830 # But it is inappropriate to do so without checking if makeinfo is
 831 # actually needed - it is not if the info files are up-to-date.  (Bug#3982)
 832 # Only the doc/*/Makefiles can decide that, so we let those rules run
 833 # and give a standard error if makeinfo is needed but missing.
 834 # While it would be nice to give a more detailed error message, that
 835 # would require changing every rule in doc/ that builds an info file,
 836 # and it's not worth it.  This case is only relevant if you download a
 837 # release, then change the .texi files.
 838 info: force-info
 839         @if test "$(HAVE_MAKEINFO)" = "no"; then \
 840           echo "Configured --without-makeinfo, not building manuals" ; \
 841         else \
 842           $(MAKE) $(MFLAGS) info-real ; \
 843         fi
 844
 845 # The info/dir file must be updated by hand when new manuals are added.
 846 check-info-dir: info
 847         cd info ; \
 848         missing= ; \
 849         for file in *; do \
 850           test -f "$${file}" || continue ; \
 851           case $${file} in \
 852             *-[0-9]*|COPYING|dir) continue ;; \
 853           esac ; \
 854           grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
 855         done ; \
 856         if test -n "$${missing}"; then \
 857           echo "Missing info/dir entries: $${missing}" ; \
 858           exit 1 ; \
 859         fi ; \
 860         echo "info/dir is OK"
 861
 862 dvi:
 863         (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
 864         (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
 865         (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
 866         (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
 867
 868 #### Bootstrapping.
 869
 870 ### This first cleans the lisp subdirectory, removing all compiled
 871 ### Lisp files.  Then re-run make to build all the files anew.
 872
 873 .PHONY: bootstrap
 874
 875 bootstrap: bootstrap-clean FRC
 876         if [ -x ./config.status ]; then           \
 877             ./config.status;                      \
 878         else                                      \
 879             ./configure --enable-maintainer-mode; \
 880         fi
 881         $(MAKE) $(MFLAGS) info all
 882
 883 .PHONY: check-declare
 884
 885 check-declare:
 886         @if [ ! -e $(srcdir)/src/emacs ]; then \
 887           echo "You must build Emacs to use this command"; \
 888           exit 1; \
 889         fi
 890         (cd leim; $(MAKE) $(MFLAGS) $@)
 891         (cd lisp; $(MAKE) $(MFLAGS) $@)