etc/gnus-refcard.tex

   1 \documentclass{article}
   2
   3 % Previously we had five input LaTeX files (booklet.tex bk-lt.tex bk-a4.tex
   4 % refcard.tex gnusref.tex) and two logo files (gnuslogo-refcard.eps and
   5 % gnuslogo-booklet.eps).
   6 %
   7 % From this LaTeX file (gnus-refcard.tex) plus a single logo (gnus-logo.eps),
   8 % we can generate the refcard and the booklet version.  Appropriate Makefile
   9 % rules were added.  This simplifies to distribute the refcard with Emacs.
  10 %
  11 % (Reiner Steib, March 2005)
  12
  13 \usepackage{ifthen}
  14 \ifthenelse{\isundefined{\booklettrue}}{
  15   \typeout{Creating reference card...}
  16 }{
  17   \typeout{Creating reference booklet...}}
  18
  19 \usepackage{supertabular}
  20
  21 \newlength{\logowidth}  \setlength{\logowidth} {6.861in}
  22 \newlength{\logoheight} \setlength{\logoheight}{7.013in}
  23
  24 \usepackage{graphicx}
  25
  26 \usepackage{geometry}
  27
  28 \ifthenelse{\isundefined{\booklettrue}}{% ifcard %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  29   % Reference Card
  30
  31   \def\Guide{Card}\def\guide{card}
  32   \def\logoscale{0.25}
  33
  34   % Page setup for the refcard:
  35
  36   % \setlength{\textwidth}{7.26in} \setlength{\textheight}{10in}
  37   % \setlength{\topmargin}{-1.0in}
  38   % % the same settings work for A4, although there is a bit of space at the
  39   % % top and bottom of the page.
  40   % \setlength{\oddsidemargin}{-0.5in} \setlength{\evensidemargin}{-0.5in}
  41
  42   \ifthenelse{\isundefined{\letterpapertrue}}{
  43     \geometry{a4paper,hmargin=10mm,tmargin=10mm,bmargin=35mm}
  44   }{
  45     \geometry{hmargin=20mm,tmargin=10mm,bmargin=12mm}
  46   }
  47
  48 }{ %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  49   % Reference Booklet
  50
  51   \def\Guide{Booklet}\def\guide{booklet}
  52   \def\logoscale{0.5}% FIXME: too large for 2up printing?  --rsteib
  53
  54   % FIXME: Use geometry package.  --rsteib
  55 %   \ifthenelse{\isundefined{\letterpapertrue}}{
  56 %     \textwidth 4.9in \textheight 7.35in \topmargin -1.0in
  57 %   }{
  58 %     \textwidth 4.5in \textheight 7.5in \topmargin -1.0in
  59 %   }
  60 %   \oddsidemargin -0.5in \evensidemargin -0.5in
  61   \ifthenelse{\isundefined{\letterpapertrue}}{
  62     \geometry{a5paper,hmargin=10mm,tmargin=10mm,bmargin=4mm}
  63   }{
  64     % FIXME: Use geometry package.  --rsteib
  65     \geometry{a5paper,hmargin=20mm,tmargin=10mm,bmargin=4mm}
  66   }
  67
  68   \def\sec{\section}
  69   \def\subsec{\subsection}
  70   \def\subsubsec{\subsubsection}
  71   \def\blankpage{\vspace*{\fill}\par
  72   %\centerline{(This page intentionally left blank.)}
  73   \par\vspace*{\fill}\pagebreak}
  74 }%ifbooklet% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  75
  76 % \input{gnusref} % % % % % % % % % % % % % % % % % % % % % % % % % %
  77 %% include file for the Gnus refcard and booklet
  78
  79 \def\progver{5.10}\def\refver{5.10-2} % program and refcard versions
  80 \def\date{Mar, 2005}
  81 \def\author{Gnus Bugfixing Girls + Boys $<$bugs@gnus.org$>$}
  82
  83 %%
  84 \newlength{\keycolwidth}
  85 \newenvironment{keys}[1]% #1 is the widest key
  86 {\nopagebreak%\noindent%
  87   \settowidth{\keycolwidth}{#1}%
  88   \addtolength{\keycolwidth}{\tabcolsep}%
  89   \addtolength{\keycolwidth}{-\columnwidth}%
  90   \begin{supertabular}{@{}l@{\hspace{\tabcolsep}}p{-\keycolwidth}@{}}}%
  91   {\end{supertabular}\\}
  92
  93 %% uncomment the first definition if you do not want pagebreaks in maps
  94 %%\newcommand{\esamepage}{\samepage}
  95 \newcommand{\esamepage}{}
  96
  97 \newcommand*{\B}[1]{{\bf#1})}    % bold l)etter
  98
  99 \newcommand{\Title}{%
 100   \begin{center}
 101     {\bf\LARGE Gnus \progver\ Reference \Guide\\}
 102                                 %{\normalsize \Guide\ version \refver}
 103   \end{center}
 104   }
 105
 106 % \newcommand*{\LogoOLD}[1]{\centerline{%
 107 %     \makebox[\logoscale\logowidth][l]{\vbox to \logoscale\logoheight
 108 %       {\vfill\epsfig{figure=gnuslogo-#1}}\vspace{-\baselineskip}}}}
 109
 110 \newcommand*{\Logo}[1]{\centerline{%
 111     \includegraphics[width=\logoscale\logowidth]{gnus-logo}}}
 112
 113 \newcommand{\Copyright}{%
 114   \begin{center}
 115     Copyright \copyright\ 1995, 2002, 2003, 2004,
 116        2005 Free Software Foundation, Inc.\\*
 117     Copyright \copyright\ 1995 Vladimir Alexiev
 118     $<$vladimir@cs.ualberta.ca$>$.\\*
 119     Copyright \copyright\ 2000 Felix Natter $<$fnatter@gmx.net$>$.\\*
 120     Copyright \copyright\ 2001, 2002, 2003, 2005 \author.\\*
 121     Created from the Gnus manual Copyright \copyright\ 1994 Lars Magne
 122     Ingebrigtsen.\\*
 123     and the Emacs Help Bindings feature (C-h b).\\*
 124     Gnus logo copyright \copyright\ 1995 Luis Fernandes.\\*
 125   \end{center}
 126
 127   Permission is granted to make and distribute copies of this reference
 128   \guide{} provided the copyright notice and this permission are preserved on
 129   all copies.  Please send corrections, additions and suggestions to the
 130   current maintainer's email address. \Guide{} last edited on \date.
 131   }
 132
 133 \newcommand{\Notes}{%
 134   \subsection*{Notes}
 135   {\esamepage
 136     Gnus is complex. Currently it has some 876 interactive (user-callable)
 137     functions. Of these 618 are in the two major modes (Group and
 138     Summary/Article). Many of these functions have more than one binding, some
 139     have 3 or even 4 bindings. The total number of keybindings is 677. So in
 140     order to save 40\% space, every function is listed only once on this
 141     \guide, under the ``more logical'' binding. Alternative bindings are given
 142     in parentheses in the beginning of the description.
 143
 144     Many Gnus commands are affected by the numeric prefix. Normally you enter a
 145     prefix by holding the Meta key and typing a number, but in most Gnus modes
 146     you don't need to use Meta since the digits are not self-inserting. The
 147     prefixed behavior of commands is given in [brackets]. Often the prefix is
 148     used to specify:
 149
 150     \quad [distance] How many objects to move the point over.
 151
 152     \quad [scope] How many objects to operate on (including the current one).
 153
 154     \quad [p/p] The ``Process/Prefix Convention'': If a prefix is given then it
 155     determines how many objects to operate on. Else if there are some objects
 156     marked with the process mark \#, these are operated on. Else only the
 157     current object is affected.
 158
 159     \quad [level] A group subscribedness level. Only groups with a lower or
 160     equal level will be affected by the operation. If no prefix is given,
 161     `gnus-group-default-list-level' is used.  If
 162     `gnus-group-use-permanent-levels', then a prefix to the `g' and `l'
 163     commands will also set the default level.
 164
 165     \quad [score] An article score. If no prefix is given,
 166     `gnus-summary-default-score' is used. \\*[\baselineskip]
 167                                 % some keys
 168     Gnus startup-commands:\\*
 169     \begin{keys}{M-x gnus-unplugged}
 170       M-x gnus           & start Gnus. \\
 171       M-x gnus-no-server & start Gnus without connecting to server
 172       (i.e. to read mail). \\
 173     \end{keys}
 174     Additionally, there are the two commands \texttt{gnus-plugged} and
 175     \texttt{gnus-unplugged}, which are only used if you want to download
 176     news and/or read previously downloaded news offline (see C-c C-i g Gnus
 177     Unplugged RET). Note: \texttt{gnus-no-server} ignores the stuff in
 178     \texttt{gnus-agent-directory}, and thus does not allow you to use Gnus
 179     Unplugged.
 180                                 %
 181     \begin{keys}{C-c C-i}
 182       C-c C-i & Go to the Gnus online {\bf info}.\\
 183       C-c C-b & Send a Gnus {\bf bug} report.\\
 184     \end{keys}
 185     }}
 186
 187 \newcommand{\GroupLevels}{%
 188   The table below assumes that you use the default Gnus levels.
 189   Fill your user-specific levels in the blank cells.\\[1\baselineskip]
 190   \begin{tabular}{|c|l|l|}
 191     \hline
 192     Level & Groups & Status \\
 193     \hline
 194     1 & draft/mail groups   &              \\
 195     2 & mail groups         &              \\
 196     3 &                     & subscribed   \\
 197     4 &                     &              \\
 198     5 & default list level  &              \\
 199     \hline
 200     6 &                     & unsubscribed \\
 201     7 &                     &              \\
 202     \hline
 203     8 &                     & zombies      \\
 204     \hline
 205     9 &                     & killed       \\
 206     \hline
 207   \end{tabular}}
 208
 209 \newcommand{\MarkCharacters}{%
 210   {\esamepage If a command directly sets a mark, it is shown in parentheses.\\*
 211     \newlength{\markcolwidth}
 212     \settowidth{\markcolwidth}{` '}% widest character
 213     \addtolength{\markcolwidth}{4\tabcolsep}
 214     \addtolength{\markcolwidth}{-\columnwidth}
 215     \newlength{\markdblcolwidth}
 216     \setlength{\markdblcolwidth}{\columnwidth}
 217     \addtolength{\markdblcolwidth}{-2\tabcolsep}
 218     \begin{tabular}{|c|p{-\markcolwidth}|}
 219       \hline
 220       \multicolumn{2}{|p{\markdblcolwidth}|}{{\bf ``Read'' Marks.}
 221         All these marks appear in the first column of the summary line, and so
 222         are mutually exclusive.}\\
 223       \hline
 224       ` ' & (M-u, M SPC, M c) Not read.\\
 225       !   & (!, M !, M t) Ticked (interesting).\\
 226       ?   & (?, M ?) Dormant (only followups are interesting).\\
 227       E   & (E, M e, M x) {\bf Expirable}. Only has effect in mail groups.\\
 228       G   & (C, B DEL) Canceled article (or deleted in mailgroups).\\
 229       \$  & (M-d, M s x, S x).  Marked as spam.\\
 230       \hline\hline
 231       \multicolumn{2}{|p{\markdblcolwidth}|}
 232       {The marks below mean that the article
 233         is read (killed, uninteresting), and have more or less the same effect.
 234         Some commands however explicitly differentiate between them (e.g.\ M
 235         M-C-r, adaptive scoring).}\\
 236       \hline
 237       r   & (d, M d, M r) Deleted (marked as {\bf read}).\\
 238       C   & (M C; M C-c; M H; c, Z c; Z n; Z C) Killed by {\bf catch-up}.\\
 239       F   & SOUPed article. See the manual.\\
 240       O   & {\bf Old} (read in a previous session).\\
 241       K   & (k, M k; C-k, M K) {\bf Killed}.\\
 242       M   & Article marked as read by duplicate suppression.\\
 243       Q   & Article is part of a sparse thread (see ``Threading''
 244       in the manual).\\
 245       R   & {\bf Read} (viewed in actuality).\\
 246       X   & Killed by a kill file.\\
 247       Y   & Killed due to low score.\\
 248       \hline\multicolumn{2}{c}{\vspace{1ex}}\\\hline
 249       \multicolumn{2}{|p{\markdblcolwidth}|}
 250       {{\bf Marks not affecting visibility}}\\
 251       \hline
 252       \#  & (\#, M \#, M P p) Processable (will be affected by the next operation).
 253       [2]\\
 254       A   & {\bf Answered} (followed-up or replied). [2]\\
 255       F   & Forwarded. [2]\\
 256       $\ast$  & Cached. [2]\\
 257       S   & Saved. [2]\\
 258       N   & Recently arrived. [2]\\
 259       .   & Unseen. [2]\\
 260       +   & Over default score. [3]\\
 261       $-$ & Under default score. [3]\\
 262       $=$ & Has children (thread underneath it). Add `\%e' to
 263       `gnus-summary-line-format'. [3]\\
 264       \hline
 265     \end{tabular}
 266     }}
 267
 268 \newcommand{\GroupModeGeneral}{%
 269   \begin{keys}{C-c M-C-x}
 270     RET     & (=) Enter this group. [Prefix: how many (read) articles to fetch.
 271     Positive: newest articles, negative: oldest ones; non-numerical:
 272     view all articles, not just unread]\\
 273     M-RET   & Enter group quickly.\\
 274     M-SPC   & Same as RET but does not expunge and hide dormants.\\
 275     M-C-RET & Enter group without any processing, changes will not be permanent.\\
 276     SPC     & Select this group and display the first (unread) article. [Same
 277     prefix as above.]\\
 278     ?       & Give a very short help message.\\
 279     $<$     & Go to the beginning of the Group buffer.\\
 280     $>$     & Go to the end of the Group buffer.\\
 281     ,       & Jump to the lowest-level group with unread articles.\\
 282     .       & Jump to the first group with unread articles.\\
 283     \^{}      & Enter the Server buffer mode.\\
 284     a       & Post an {\bf article} to a group
 285               [Prefix: use group under point to find posting-style].\\
 286     b       & Find {\bf bogus} groups and delete them.\\
 287     c       & Mark all unticked articles in this group as read ({\bf catch-up}).
 288     [p/p]\\
 289     g       & Check the server for new articles ({\bf get}). [level]\\
 290     M-g     & Check the server for new articles in this group ({\bf get}). [p/p]\\
 291     j       & {\bf Jump} to a group.\\
 292     m       & {\bf Mail} a message to someone
 293               [Prefix: use group under point to find posting-style].\\
 294     n       & Go to the {\bf next} group with unread articles. [distance]\\
 295     M-n     & Go to the {\bf next} group on the same or lower level.
 296     [distance]\\
 297     p       & (DEL) Go to the {\bf previous} group with unread articles.
 298     [distance]\\
 299     M-p     & Go to the {\bf previous} group on the same or lower level. [distance]\\
 300     q       & {\bf Quit} Gnus.\\
 301     r       & Re-read the init file ({\bf reset}).\\
 302     s       & {\bf Save} the `.newsrc.eld' file (and `.newsrc' if
 303     `gnus-save-newsrc-file').\\
 304     z       & Suspend (kill all buffers of) Gnus.\\
 305     B       & {\bf Browse} a foreign server.\\
 306     C       & Mark all articles in this group as read ({\bf Catch-up}). [p/p]\\
 307     F       & {\bf Find} new groups and process them.\\
 308     N       & Go to the {\bf next} group. [distance]\\
 309     P       & Go to the {\bf previous} group. [distance]\\
 310     Q       & {\bf Quit} Gnus without saving any startup (.newsrc) files.\\
 311     R       & {\bf Restart} Gnus.\\
 312     Z       & Clear the dribble buffer.\\
 313     M-c     & Clear data from group (marks and list of read articles). \\
 314     C-c C-s & {\bf Sort} the groups by name, number of unread articles, or level
 315     (depending on `gnus-group-sort-function').\\
 316     C-c C-x & Run all expirable articles in this group through the {\bf expiry}
 317     process.\\
 318     C-c M-C-x & Run all articles in all groups through the {\bf expiry} process.\\
 319     C-c M-g & Activate all {\bf groups}.\\
 320     C-c C-i & Gnus online-manual ({\bf info}).\\
 321     C-x C-t & {\bf Transpose} two groups.\\
 322     H f     & Fetch this group's {\bf FAQ} (using ange-ftp).\\
 323     H c     & Display this group's {\bf charter}. [Prefix: query for group]\\
 324     H C     & Display this group's {\bf control message} (using
 325     ange-ftp). [Prefix: query for group]\\
 326     H v     & (V) Display the Gnus {\bf version} number.\\
 327     H d     & (C-c C-d) Show the {\bf description} of this group
 328     [Prefix: re-read from server].\\
 329     M-d     & {\bf Describe} all groups. [Prefix: re-read from server]\\
 330     D g     & Regenerate a Sieve script from group parameters.\\
 331     D u     & Regenerate Sieve script and {\bf upload} to server.\\
 332   \end{keys}
 333   }
 334
 335 \newcommand{\ListGroups}{%
 336   {\esamepage
 337     \begin{keys}{A M}
 338       A d     & (C-c C-M-a) List all groups whose names or {\bf descriptions} match a regexp.\\
 339       A k     & (C-c C-l) List all {\bf killed} groups.
 340       [Prefix: look at active-file from server]\\
 341       A l     & List all groups on a specific level.
 342       [Prefix: also list groups with no unread articles]\\
 343       A a     & (C-c C-a) List all groups whose names match a regexp
 344       ({\bf apropos}).\\
 345       A A     & List the server's active-file.\\
 346       A M     & List groups that {\bf match} a regexp.\\
 347       A m     & List groups that {\bf match} a regexp and have unread articles.
 348       [level]\\
 349       A s     & (l) List all {\bf subscribed} groups with unread articles.
 350       [level; 5 and lower is the default]\\
 351       A u     & (L) List all groups (including read and {\bf unsubscribed}).
 352       [level; 7 and lower is the default]\\
 353       A z     & List all {\bf zombie} groups.\\
 354       A c     & List all groups with cached articles. [level]\\
 355       A ?     & List all groups with dormant articles. [level]\\
 356     \end{keys}
 357   }
 358
 359   \newcommand{\CreateEditGroups}{%
 360     {\esamepage
 361       The select methods are indicated in parentheses.\\*
 362       \begin{keys}{G DEL}
 363         G a     & Make the Gnus list {\bf archive} group. (nndir over ange-ftp)\\
 364         G c     & {\bf Customize} this group's parameters.\\
 365         G d     & Make a {\bf directory} group (every file must be a posting and files
 366         must have numeric names). (nndir)\\
 367         G D     & Enter a {\bf directory} as a (temporary) group.
 368         (nneething without recording articles read)\\
 369         G e     & (M-e) {\bf Edit} this group's select method.\\
 370         G E     & {\bf Edit} this group's info (select method, articles read, etc).\\
 371         G f     & Make a group based on a {\bf file}. (nndoc)\\
 372         G h     & Make the Gnus {\bf help} (documentation) group. (nndoc)\\
 373         G k     & Make a {\bf kiboze} group. (nnkiboze)\\
 374         G m     & {\bf Make} a new group.\\
 375         G p     & Edit this group's {\bf parameters}.\\
 376         G r     & Rename this group (does not work with read-only groups!).\\
 377         G u     & Create one of the groups mentioned in gnus-{\bf useful}-groups.\\
 378         G v     & Add this group to a {\bf virtual} group. [p/p]\\
 379         G V     & Make a new empty {\bf virtual} group. (nnvirtual)\\
 380         G w     & Create ephemeral group based on web-search. [Prefix: make solid group
 381         instead]\\
 382         G R     & Make an {\bf RSS} group.\\
 383         G DEL   & {\bf Delete} group [Prefix: delete all articles as well].\\
 384         G x     & Expunge all deleted articles in an nnimap mailbox.\\
 385         G l     & Edit ACL (Access Control {\bf List}) for an nnimap mailbox.\\
 386       \end{keys}
 387       You can also create mail-groups and read your mail with Gnus (very useful
 388       if you are subscribed to mailing lists), using one of the methods
 389       nnmbox, nnbabyl, nnml, nnmh, or nnfolder. Read about it in the online info
 390       (C-c C-i g Reading Mail RET).
 391       }}
 392
 393                                 % TODO:
 394   \newcommand{\SoupCommands}{%
 395     \begin{keys}{G s w}
 396       G s b   & gnus-group-brew-soup: not documented.\\
 397       G s p   & gnus-soup-pack-packet: not documented.\\
 398       G s r   & nnsoup-pack-replies: not documented.\\
 399       G s s   & gnus-soup-send-replies: not documented.\\
 400       G s w   & gnus-soup-save-areas: not documented.\\
 401     \end{keys}}
 402
 403   \newcommand{\MarkGroups}{%
 404     \begin{keys}{M m}
 405       M m     & (\#) Set the process {\bf mark} on this group. [scope]\\
 406       M r     & Mark all groups matching regular expression.\\
 407       M u     & (M-\#) Remove the process mark from this group ({\bf unmark}).
 408       [scope]\\
 409       M U     & Remove the process mark from all groups (\textbf{umark all}).\\
 410       M w     & Mark all groups in the current region. [prefix: unmark]\\
 411       M b     & Mark all groups in the {\bf buffer}. [prefix: unmark]\\
 412     \end{keys}}
 413
 414   \newcommand{\GroupTopicsGeneral}{%
 415     {\esamepage
 416       Topics are ``categories'' for groups. Press t in the group-buffer to
 417       toggle gnus-topic-mode (C-c C-i g Group Topics RET).\\*
 418       \begin{keys}{C-c C-x}
 419         T n     & Prompt for topic {\bf name} and create it.\\
 420         T m     & {\bf Move} the current group to some other topic [p/p].\\
 421         T j     & {\bf Jump} to a topic.\\
 422         T c     & {\bf Copy} the current group to some other topic [p/p].\\
 423         T D     & Remove (not delete) the current group [p/p].\\
 424         T M     & {\bf Move} all groups matching a regexp to a topic.\\
 425         T C     & {\bf Copy} all groups matching a regexp to a topic.\\
 426         T H     & Toggle {\bf hiding} of empty topics.\\
 427         T r     & {\bf Rename} a topic.\\
 428         T DEL   & Delete an empty topic.\\
 429         T \#    & Mark all groups in the current topic with the process-mark.\\
 430         T M-\#  & Remove the process-mark from all groups in the current topic.\\
 431         T TAB   & (TAB) Indent current topic [Prefix: unindent].\\
 432         M-TAB   & Unindent the current topic.\\
 433         RET     & (SPC) Either unfold topic or enter group [level].\\
 434         T s     & {\bf Show} the current topic. [Prefix: show permanently]\\
 435         T h     & {\bf Hide} the current topic. [Prefix: hide permanently]\\
 436         C-c C-x & Expire all articles in current group or topic.\\
 437         C-k     & {\bf Kill} a group or topic.\\
 438         C-y     & {\bf Yank} a group or topic.\\
 439         A T     & List active-file using {\bf topics}.\\
 440         G p     & Edit topic-{\bf parameters}.\\
 441         T M-n   & Go to {\bf next} topic. [distance]\\
 442         T M-p   & Go to {\bf previous} topic. [distance]\\
 443       \end{keys}
 444       }
 445     }
 446
 447   \newcommand{\TopicSorting}{%
 448     {\esamepage
 449       \begin{keys}{T S m}
 450         T S a  & Sort {\bf alphabetically}.\\
 451         T S u  & Sort by number of {\bf unread} articles.\\
 452         T S l  & Sort by group {\bf level}.\\
 453         T S v  & Sort by group score ({\bf value}).\\
 454         T S r  & Sort by group {\bf rank}.\\
 455         T S m  & Sort by {\bf method}.\\
 456         T S e  & Sort by {\bf server} name.\\
 457         T S s  & Sort according to `gnus-group-sort-function'.\\
 458       \end{keys}
 459       With a prefix these commands will sort in reverse order.
 460       }
 461     }
 462
 463   \newcommand{\SubscribeKillYankGroups}{%
 464     {\esamepage
 465       \begin{keys}{S C-k}
 466         S k     & (C-k) {\bf Kill} this group.\\
 467         S l     & Set the {\bf level} of this group. [p/p]\\
 468         S s     & (U) Prompt for a group and toggle its {\bf subscription}.\\
 469         S t     & (u) {\bf Toggle} subscription to this group. [p/p]\\
 470         S w     & (C-w) Kill all groups in the region.\\
 471         S y     & (C-y) {\bf Yank} the last killed group.\\
 472         S z     & Kill all {\bf zombie} groups.\\
 473         S C-k   & Kill all groups on a certain level.\\
 474       \end{keys}
 475       }
 476     }
 477
 478   \newcommand{\SummaryModeGeneral}{%
 479     {\esamepage
 480       \begin{keys}{M-RET}
 481         SPC     & (A SPC, A n) Select an article, scroll it one page, move to the
 482         next one.\\
 483         DEL     & (A DEL, A p, b) Scroll this article one page back. [distance]\\
 484         RET     & (A RET) Scroll this article one line forward. [distance]\\
 485         M-RET   & (A M-RET) Scroll this article one line backward. [distance]\\
 486         =       & Expand the Summary window (fullsize).
 487         [Prefix: shrink to display article window]\\
 488                                 %
 489         \&      & Execute a command on all articles whose header matches a regexp.
 490         [Prefix: move backwards]\\
 491         M-\&    & Execute a command on all articles having the process mark.\\
 492                                 %
 493         M-n     & (G M-n) Go to the {\bf next} summary line of an unread article.
 494         [distance]\\
 495         M-p     & (G M-p) Go to the {\bf previous} summary line of an unread article.
 496         [distance]\\
 497         M-s     & {\bf Search} through all subsequent articles for a regexp.\\
 498         M-r     & Search through all previous articles for a regexp.\\
 499                                 %
 500         A P     & {\bf Postscript}-print current buffer.\\
 501                                 %
 502         M-k     & Edit this group's {\bf kill} file.\\
 503         M-K     & Edit the general {\bf kill} file.\\
 504                                 %
 505         C-t     & Toggle {\bf truncation} of summary lines.\\
 506         Y g     & Regenerate the summary-buffer.\\
 507         Y c     & Insert all cached articles into the summary-buffer.\\
 508                                 %
 509         M-C-e   & {\bf Edit} the group-parameters.\\
 510         M-C-a   & Customize the group-parameters.\\
 511                                 %
 512                                 % article handling
 513                                 %
 514         A $<$   & ($<$, A b) Scroll to the beginning of this article.\\
 515         A $>$   & ($>$, A e) Scroll to the end of this article.\\
 516         A s     & (s) Perform an i{\bf search} in the article buffer.\\
 517                                 %
 518         A D     & (C-d) Un{\bf digestify} this article into a separate group.
 519         [Prefix: force digest]\\
 520         M-C-d   & Like C-d, but open several documents in nndoc-groups, wrapped
 521         in an nnvirtual group [p/p]\\
 522                                 %
 523         A g     & (g) (Re)fetch this article ({\bf get}). [Prefix: get raw version]\\
 524         A r     & (\^{}, A \^{}) Fetch the parent(s) of this article.
 525         [Prefix: if positive fetch \textit{n} ancestors;
 526         negative: fetch only the \textit{n}th ancestor]\\
 527         A t     & {\bf Translate} this article.\\
 528         A R     & Fetch all articles mentioned in the {\bf References}-header.\\
 529         A T     & Fetch full \textbf{thread} in which the current article appears.\\
 530         M-\^{}  & Fetch the article with a given Message-ID.\\
 531         S y     & {\bf Yank} the current article into an existing message-buffer.
 532         [p/p]\\
 533         A M     & Setup group parameters for {\bf mailing} lists from
 534         headers. [Prefix: replace old settings]\\
 535       \end{keys}
 536       }
 537     }
 538
 539   \newcommand{\MIMESummary}{%
 540     {\esamepage
 541       For the commands operating on one MIME part (a subset of gnus-article-*), a
 542       prefix selects which part to operate on. If the point is placed over a
 543       MIME button in the article buffer, use the corresponding bindings for the
 544       article buffer instead.
 545
 546       \begin{keys}{W M w}
 547         K v      & (b, W M b) {\bf View} the MIME-part.\\
 548         K o      & {\bf Save} the MIME part.\\
 549         K c      & {\bf Copy} the MIME part.\\
 550         K e      & View the MIME part {\bf externally}.\\
 551         K i      & View the MIME part {\bf internally}.\\
 552         K $\mid$ & Pipe the MIME part to an external command.\\
 553         K b      & Make all the MIME parts have buttons in front of them.\\
 554         K m      & Try to repair {\bf multipart-headers}.\\
 555         K C      & View the MIME part using a different {\bf charset}.\\
 556         X m      & Save all parts matching a MIME type to a directory. [p/p]\\
 557         M-t      & Toggle the buttonized display of the article buffer.\\
 558         W M w    & Decode RFC2047-encoded words in the article headers.\\
 559         W M c    & Decode encoded article bodies. [Prefix: prompt for charset]\\
 560         W M v    & View all MIME parts in the current article.\\
 561       \end{keys}
 562       }
 563     }
 564
 565   \newcommand{\SortSummary}{%
 566     {\esamepage
 567       \begin{keys}{C-c C-s C-a}
 568         C-c C-s C-a & Sort the summary-buffer by {\bf author}.\\
 569         % C-c C-s C-t & Sort the summary-buffer by {\bf recipient}.\\ % No Gnus
 570         C-c C-s C-d & Sort the summary-buffer by {\bf date}.\\
 571         C-c C-s C-i & Sort the summary-buffer by article score.\\
 572         C-c C-s C-l & Sort the summary-buffer by amount of {\bf lines}.\\
 573         C-c C-s C-c & Sort the summary-buffer by length.\\
 574         C-c C-s C-n & Sort the summary-buffer by article {\bf number}.\\
 575         C-c C-s C-s & Sort the summary-buffer by {\bf subject}.\\
 576         C-c C-s C-r & Sort the summary-buffer {\bf randomly}.\\
 577         C-c C-s C-o & Sort the summary-buffer using the default method.\\
 578       \end{keys}
 579       With a prefix these functions sort in reverse order.
 580       }
 581     }
 582
 583   \newcommand{\MailGroups}{% formerly \Bsubmap
 584     {\esamepage
 585       These commands (except `B c') are only valid in a mail group.\\*
 586       \begin{keys}{B M-C-e}
 587         B DEL   & (B backspace, B delete) {\bf Delete} the mail article from disk (!).
 588         [p/p]\\
 589         B B     & Crosspost this article to another group.\\
 590         B c     & {\bf Copy} this article from any group to a mail group. [p/p]\\
 591         B e     & {\bf Expire} all expirable articles in this group. [p/p]\\
 592         B i     & {\bf Import} a random file into this group.\\
 593         B I     & Create an empty article in this group.\\
 594         B m     & {\bf Move} the article from one mail group to another. [p/p]\\
 595         B p     & Query whether the article was {\bf posted} as well.\\
 596         B q     & {\bf Query} where the article will end up after fancy splitting\\
 597         B r     & {\bf Respool} this mail article. [p/p]\\
 598         B t     & {\bf Trace} the fancy splitting patterns applied to this article.\\
 599         B w     & (e) Edit this article.\\
 600         B M-C-e & {\bf Expunge} (delete from disk) all expirable articles in this group
 601         (!). [p/p]\\
 602         K E     & {\bf Encrypt} article body. [p/p]\\
 603       \end{keys}
 604       }
 605     }
 606
 607   \newcommand{\DraftGroup}{% formerly \Dsubmap
 608     {\esamepage
 609       The ``drafts''-group contains messages that have been saved but not sent
 610       and rejected articles. \\*
 611       \begin{keys}{B DEL}
 612         D e      & \textbf{edit} message.\\
 613         D s      & \textbf{Send} message. [p/p]\\
 614         D S      & \textbf{Send} all messages.\\
 615         D t      & \textbf{Toggle} sending (mark as unsendable).\\
 616         B DEL    & \textbf{Delete} message (like in mailgroup).\\
 617       \end{keys}
 618       }
 619     }
 620
 621   \newcommand{\SelectArticles}{% formerly \Gsubmap
 622     {\esamepage
 623       These commands select the target article. They do not understand the prefix.\\*
 624       \begin{keys}{G C-n}
 625         h       & Enter article-buffer.\\
 626         G b     & (,) Go to the {\bf best} article (the one with highest score).\\
 627         G f     & (.) Go to the {\bf first} unread article.\\
 628         G n     & (n) Go to the {\bf next} unread article.\\
 629         G p     & (p) Go to the {\bf previous} unread article.\\
 630                                 %
 631         G N     & (N) Go to {\bf the} next article.\\
 632         G P     & (P) Go to the {\bf previous} article.\\
 633                                 %
 634         G C-n   & (M-C-n) Go to the {\bf next} article with the same subject.\\
 635         G C-p   & (M-C-p) Go to the {\bf previous} article with the same subject.\\
 636                                 %
 637         G l     & (l) Go to the previously read article ({\bf last-read-article}).\\
 638         G o     & Pop an article off the summary history and go to it.\\
 639                                 %
 640         G g     & Search an article via subject.\\
 641         G j     & (j) Search an article via Message-Id or subject.\\
 642       \end{keys}
 643       }
 644     }
 645
 646   \newcommand{\ArticleModeGeneral}{%
 647     {\esamepage
 648       The normal navigation keys work in Article mode. Some additional keys are:\\
 649       \begin{keys}{C-c RET}
 650         C-c \^{} & Get the article with the Message-ID near point.\\
 651         C-c RET & Send reply to address near point.\\
 652         h       & Go to the \textbf{header}-line of the article in the
 653         summary-buffer.\\
 654         s       & Go to \textbf{summary}-buffer.\\
 655         RET     & (middle mouse button) Activate the button at point to follow
 656         an URL or Message-ID.\\
 657         TAB     & Move the point to the next button.\\
 658         M-TAB   & Move point to previous button.\\
 659       \end{keys}
 660       }
 661     }
 662
 663   \newcommand{\WashArticle}{% formerly \Wsubmap
 664     {\esamepage
 665       \begin{keys}{W W H}
 666         W 6     & Translate a base64 article.\\
 667         W a     & Strip certain {\bf headers} from body.\\
 668         W b     & Make Message-IDs and URLs in the article mouse-clickable
 669         {\bf buttons}.\\
 670         W c     & Translate CRLF-pairs to LF and then the remaining CR's to LF's.\\
 671         W d     & Treat {\bf dumbquotes}.\\
 672         W e     & Treat {\bf emphasized} text.\\
 673         W h     & Treat {\bf HTML}.\\
 674         W l     & (w) Remove page breaks ({\bf\^{}L}) from the article.\\
 675         W m     & {\bf Morse} decode article.\\
 676         W o     & Treat {\bf overstrike} or underline (\^{}H\_) in the article.\\
 677         W p     & Verify X-{\bf PGP}-Sig header.\\
 678         W q     & Treat {\bf quoted}-printable in the article.\\
 679         W r     & (C-c C-r) Do a Caesar {\bf rotate} (rot13) on the article.\\
 680         W s     & Verify (and decrypt) a {\bf signed} message.\\
 681         W t     & (t) {\bf Toggle} display of all headers.\\
 682         W u     & {\bf Unsplit} broken URLs.\\
 683         W v     & (v) Toggle permanent {\bf verbose} displaying of all headers.\\
 684         W w     & Do word {\bf wrap} in the article.\\
 685         W B     & Add clickable {\bf buttons} to the article headers.\\
 686         W C     & {\bf Capitalize} first word in each sentence.\\
 687         W Q     & Fill long lines.\\
 688         W Z     & Translate a HZ-encoded article.\\
 689                                 %
 690         W G u   & {\bf Unfold} folded header lines.\\
 691         W G f   & {\bf Fold} all header lines.\\
 692         W G n   & Unfold {\bf Newsgroups:} and Follow-Up-To:.\\
 693                                 %
 694         W Y c   & Repair broken {\bf citations}.\\
 695         W Y a   & Repair broken {\bf attribution} lines.\\
 696         W Y u   & {\bf Unwrap} broken citation lines.\\
 697         W Y f   & Do a {\bf full} deuglification (W Y c, W Y a, W Y u).\\
 698       \end{keys}
 699       }
 700     }
 701
 702   \newcommand{\BlankAndWhitespace}{%
 703     {\esamepage
 704       \begin{keys}{W E w}
 705         W E l   & Strip blank {\bf lines} from the beginning of the article.\\
 706         W E m   & Replace blank lines with empty lines and remove {\bf multiple}
 707         blank lines.\\
 708         W E t   & Remove {\bf trailing} blank lines.\\
 709         W E a   & Strip blank lines at the beginning and the end
 710         (W E l, W E m and W E t).\\
 711         W E A   & Strip {\bf all} blank lines.\\
 712         W E s   & Strip leading blank lines from the article body.\\
 713         W E e   & Strip trailing blank lines from the article body.\\
 714         W E w   & Remove leading {\bf whitespace} from all headers.\\
 715       \end{keys}
 716       }
 717     }
 718
 719   \newcommand{\Picons}{%
 720     {\esamepage
 721       \begin{keys}{W D D}
 722         W D s   & (W g) Display {\bf smilies}.\\
 723         W D x   & (W f) Look for and display any X-{\bf Face} headers.\\
 724         W D d   & Display any Face headers.\\
 725         W D n   & Toggle picons in {\bf Newsgroups} and Followup-To.\\
 726         W D m   & Toggle picons in {\bf mail} headers (To and Cc).\\
 727         W D f   & Toggle picons in {\bf From}.\\
 728         W D D   & Remove all images from the article buffer.\\
 729       \end{keys}
 730       }
 731     }
 732
 733   \newcommand{\TimeAndDate}{%
 734     {\esamepage
 735       \begin{keys}{W T u}
 736         W T u   & (W T z) Display the article timestamp in GMT ({\bf UT, ZULU}).\\
 737         W T i   & Display the article timestamp in {\bf ISO} 8601.\\
 738         W T l   & Display the article timestamp in the {\bf local} timezone.\\
 739         W T s   & Display according to `gnus-article-time-format'.\\
 740         W T e   & Display the time {\bf elapsed} since it was sent.\\
 741         W T o   & Display the {\bf original} timestamp.\\
 742         W T p   & Display the date in format that's {\bf
 743           pronounceable} in English.\\
 744       \end{keys}
 745       }
 746     }
 747
 748   \newcommand{\HideHighlightArticle}{%
 749     {\esamepage
 750       \begin{keys}{W W C-c}
 751         W W a   & Hide {\bf all} unwanted parts. Calls W W h, W W s, W W C-c.\\
 752         W W h   & Hide article {\bf headers}.\\
 753         W W b   & Hide {\bf boring} headers.\\
 754         W W s   & Hide {\bf signature}.\\
 755         W W l   & Hide {\bf list} identifiers in subject-header.\\
 756         W W P   & Hide {\bf PEM} (privacy enhanced messages).\\
 757         W W B   & Hide banner specified by group parameter.\\
 758         W W c   & Hide {\bf citation}.\\
 759         W W C-c & Hide {\bf citation} using a more intelligent algorithm.\\
 760         W W C   & Hide cited text in articles that aren't roots.\\
 761         W H a   & Highlight {\bf all} parts. Calls W b, W H c, W H h, W H s.\\
 762         W H c   & Highlight article {\bf citations}.\\
 763         W H h   & Highlight article {\bf headers}.\\
 764         W H s   & Highlight article {\bf signature}.\\
 765       \end{keys}
 766       For all hiding-commands: A positive prefix always hides, and a negative
 767       prefix will show what was previously hidden.
 768       }}
 769
 770   \newcommand{\MIMEArticleMode}{%
 771     {\esamepage
 772       \begin{keys}{RET}
 773         RET     & (BUTTON-2) Toggle display of the MIME object.\\
 774         v       & Prompt for a method and then view object using this method.\\
 775         o       & Prompt for a filename and save the MIME object.\\
 776         C-o     & Prompt for a filename to save the MIME object to and remove it.\\
 777         d       & {\bf Delete} the MIME object.\\
 778         c       & {\bf Copy} the MIME object to a new buffer and display this buffer.\\
 779         i       & Display the MIME object in this buffer.\\
 780         C       & Copy the MIME object to a new buffer and display this buffer using {\bf Charset} \\
 781         E       & View internally. \\
 782         e       & View {\bf externally}. \\
 783         t       & View the MIME object as a different {\bf type}.\\
 784         p       & {\bf Print} the MIME object.\\
 785         $\mid$  & Pipe the MIME object to a process.\\
 786         .       & Take action on the MIME object.\\
 787       \end{keys}
 788       }
 789     }
 790
 791   %% end of article mode for reading ..........................................
 792
 793   \newcommand{\MarkArticlesGeneral}{% formerly \Msubmap
 794     {\esamepage
 795       \begin{keys}{M M-C-r}
 796         d       & (M d, M r) Mark this article as read and move to the next one.
 797         [scope]\\
 798         D       & Mark this article as read and move to the previous one. [scope]\\
 799         !       & (u, M !, M t) Tick this article (mark it as interesting) and move
 800         to the next one. [scope]\\
 801         U       & Tick this article and move to the previous one. [scope]\\
 802         M ?     & (?) Mark this article as dormant (only followups are
 803         interesting). [scope]\\
 804         M D     & Show all {\bf dormant} articles (normally they are hidden unless they
 805         have any followups).\\
 806         M M-D   & Hide all {\bf dormant} articles.\\
 807         C-w     & Mark all articles between point and mark as read.\\
 808         M-u     & (M SPC, M c) Clear all marks from this article and move to the next
 809         one. [scope]\\
 810         M-U     & Clear all marks from this article and move to the previous one.
 811         [scope]\\
 812                                 %
 813         M e     & (E, M x) Mark this article as {\bf expirable}. [scope]\\
 814                                 %
 815         M k     & (k) {\bf Kill} all articles with the same subject then select the
 816         next unread one.\\
 817         M K     & (C-k) {\bf Kill} all articles with the same subject as this one.\\
 818                                 %
 819         M C     & {\bf Catch-up} the articles that are not ticked and not dormant.\\
 820         M C-c   & {\bf Catch-up} all articles in this group.\\
 821         M H     & {\bf Catch-up} (mark read) this group to point (to-{\bf here}).\\
 822                                 %
 823         M b     & Set a {\bf bookmark} in this article.\\
 824         M B     & Remove the {\bf bookmark} from this article.\\
 825                                 %
 826         M M-r   & (x) Expunge all {\bf read} articles from this group.\\
 827         M M-C-r & Expunge all articles having a given mark.\\
 828         M S     & (C-c M-C-s) {\bf Show} all expunged articles.\\
 829         M M C-h & Displays some more keys doing ticking slightly differently.\\
 830       \end{keys}
 831       The variable `gnus-summary-goto-unread' controls what happens after a mark
 832       has been set (C-x C-i g Setting Marks RET)
 833       }}
 834
 835   \newcommand{\MarkByScore}{%
 836     \begin{keys}{M V m}
 837       M V c   & {\bf Clear} all marks from all high-scored articles. [score]\\
 838       M V k   & {\bf Kill} all low-scored articles. [score]\\
 839       M V m   & Mark all high-scored articles with a given {\bf mark}. [score]\\
 840       M V u   & Mark all high-scored articles as interesting (tick them). [score]\\
 841     \end{keys}
 842     }
 843   }
 844
 845 \newcommand{\ProcessMark}{%
 846   {\esamepage
 847     These commands set and remove the process mark (\#). You only need to use
 848     it if the set of articles you want to operate on is non-contiguous. Else
 849     use a numeric prefix.\\*
 850     \begin{keys}{M P R}
 851       M P p   & (\#, M \#) Mark this article.\\
 852       M P u   & (M-\#, M M-\#) \textbf{unmark} this article.\\
 853       M P b   & Mark all articles in {\bf buffer}.\\
 854       M P r   & Mark all articles in the {\bf region}.\\
 855       M P g   & Unmark all articles in the region.\\
 856       M P R   & Mark all articles matching a {\bf regexp}.\\
 857       M P G   & Unmark all articles matching a regexp.\\
 858       M P t   & Mark all articles in this (sub){\bf thread}.\\
 859       M P T   & Unmark all articles in this (sub){\bf thread}.\\
 860       M P s   & Mark all articles in the current {\bf series}.\\
 861       M P S   & Mark all {\bf series} that already contain a marked article.\\
 862       M P a   & Mark {\bf all} articles (in series order).\\
 863       M P U   & \textbf{unmark} all articles.\\
 864       M P i   & {\bf Invert} the list of process-marked articles.\\
 865       M P k   & Push the current process-mark set onto stack and unmark
 866       all articles.\\
 867       M P y   & Pop process-mark set from stack and restore it.\\
 868       M P w   & Push process-mark set on the stack.\\
 869       M P v   & Mark all articles with score over the default score. [Prefix: score]\\
 870     \end{keys}
 871     }
 872   }
 873
 874 \newcommand{\Limiting}{%
 875   {\esamepage
 876     \begin{keys}{/M}
 877       //   & (/s) Limit the summary-buffer to articles matching {\bf subject}.\\
 878       /a   & Limit the summary-buffer to articles matching {\bf author}.\\
 879       /x   & Limit depending on ``extra'' headers.\\
 880       /u   & (x) Limit to {\bf unread} articles.
 881       [Prefix: also exclude ticked and dormant articles]\\
 882       /.   & Limit to unseen articles.\\
 883       /m   & Limit to articles marked with specified {\bf mark}.\\
 884       /t   & Ask for a number and exclude articles younger than that many days.
 885       [Prefix: exclude older articles]\\
 886       /n   & Limit to current article. [p/p]\\
 887       /w   & Pop the previous limit off the stack and restore it.
 888       [Prefix: pop all limits]\\
 889       /v   & Limit to score. [score]\\
 890       /E   & (M S) Include all expunged articles in the limit.\\
 891       /D   & Include all dormant articles in the limit.\\
 892       /*   & Limit to cached articles.\\
 893       Y C  & Include all cached articles in the limit.\\
 894       /d   & Exclude all dormant articles from the limit.\\
 895       /M   & Exclude all marked articles.\\
 896       /T   & Include all articles from the current thread in the limit.\\
 897       /c   & Exclude all dormant articles that have no children from the limit.\\
 898       /C   & Mark all excluded unread articles as read.
 899       [Prefix: also mark ticked and dormant articles]\\
 900       /o   & Insert all {\bf old} articles. [Prefix: how many]\\
 901       /N   & Insert all {\bf new} articles.\\
 902       /p   & Limit to articles {\bf predicated} in the `display' group parameter.\\
 903       % /r   & Limit to {\bf replied} articles. [Prefix: unreplied]\\ % No Gnus
 904     \end{keys}
 905     }
 906   }
 907
 908 \newcommand{\OutputArticles}{% formerly \Osubmap
 909   {\esamepage
 910     \begin{keys}{O m}
 911       O o     & (o, C-o) Save this article using the default article saver. [p/p]\\
 912       O b     & Save this article's {\bf body} in plain file format [p/p]\\
 913       O f     & Save this article in plain {\bf file} format. [p/p]\\
 914       O F     & like O f, but overwrite file's contents. [p/p]\\
 915       O h     & Save this article in {\bf mh} folder format. [p/p]\\
 916       O m     & Save this article in {\bf mail} format. [p/p]\\
 917       O r     & Save this article in {\bf rmail} format. [p/p]\\
 918       O v     & Save this article in {\bf vm} format. [p/p]\\
 919       O p     & ($\mid$) {\bf Pipe} this article to a shell command. [p/p]\\
 920       O P     & \textbf{Print} this article using Muttprint. [p/p]\\
 921     \end{keys}
 922     }
 923   }
 924
 925 \newcommand{\PostReplyetc}{% formerly \Ssubmap
 926   {\esamepage
 927     These commands put you in a separate news or mail buffer. See the section
 928     about composing messages for more information.\\*
 929                                 %After
 930                                 %editing the article, send it by pressing C-c C-c.  If you are in a
 931                                 %foreign group and want to post the article using the foreign server, give
 932                                 %a prefix to C-c C-c.\\*
 933     \begin{keys}{S O m}
 934       S p     & (a) {\bf Post} an article to this group.\\
 935       S f     & (f) Post a {\bf followup} to this article.\\
 936       S F     & (F) Post a {\bf followup} and include the original. [p/p]\\
 937       S o p   & Forward this article as a {\bf post} to a newsgroup.\\
 938       S M-c   & Send a complaint about excessive crossposting to the author of this
 939       article. [p/p]\\
 940                                 %
 941       S m     & (m) Send a {\bf mail} to some other person.\\
 942       S r     & (r) Mail a {\bf reply} to the author of this article.\\
 943       S R     & (R) Mail a {\bf reply} and include the original. [p/p]\\
 944       S B r   & Like S r but ignore the Reply-To: header.\\
 945       S B R   & Like S R but ignore the Reply-To: header.\\
 946       S w     & Mail a {\bf wide} reply to this article.\\
 947       S W     & Mail a {\bf wide} reply to this article and include
 948       the original.\\
 949       S v     & Mail a {\bf very} wide reply to this article.\\
 950       S V     & Mail a {\bf very} wide reply to this article and include the original.\\
 951       S o m   & (C-c C-f) Forward this article by {\bf mail} to a person.\\
 952       S D b   & Resend {\bf bounced} mail.\\
 953       S D r   & {\bf Resend} mail to a different person.\\
 954       S D e   & {\bf Edit} and resend.\\
 955                                 %
 956       S n     & Post a followup via {\bf news} even if you got the message
 957       through mail.\\
 958       S N     & Post a followup via {\bf news} and include the original mail.
 959       [p/p]\\
 960                                 %
 961       S c     & (C) {\bf Cancel} this article (only works if it is
 962       your own). [p/p]\\
 963       S s     & {\bf Supersede} this article with a new one (only for own
 964       articles).\\
 965                                 %
 966       S O m   & Digest these series and forward by {\bf mail}. [p/p]\\
 967       S O p   & Digest these series and forward as a {\bf post} to a newsgroup.
 968       [p/p]\\
 969                                 %
 970       S u     & {\bf Uuencode} a file and post it as a series.\\
 971     \end{keys}
 972     If you want to cancel or supersede an article you just posted (before it
 973     has appeared on the server), go to the *post-news* buffer, change
 974     `Message-ID' to `Cancel' or `Supersedes' and send it again with C-c C-c.
 975     }}
 976
 977 \newcommand{\Threading}{% formerly \Tsubmap
 978   {\esamepage
 979     \begin{keys}{T M-\#}
 980       T \#    & Mark this thread with the process mark.\\
 981       T M-\#  & Remove process-marks from this thread.\\
 982                                 %
 983       T t     & Re-{\bf thread} the current article's thread.\\
 984       T \^{}  & Make the current article child of the marked (or previous) article.\\
 985                                 % movement
 986       T n     & (M-C-f, M-down) Go to the {\bf next} thread. [distance]\\
 987       T p     & (M-C-b, M-up) Go to the {\bf previous} thread. [distance]\\
 988       T d     & {\bf Descend} this thread. [distance]\\
 989       T u     & Ascend this thread ({\bf up}-thread). [distance]\\
 990       T o     & Go to the top of this thread.\\
 991                                 %
 992       T s     & {\bf Show} the thread hidden under this article.\\
 993       T h     & {\bf Hide} this (sub)thread.\\
 994                                 %
 995       T i     & {\bf Increase} the score of this thread.\\
 996       T l     & (M-C-l) {\bf Lower} the score of this thread.\\
 997                                 %
 998       T k     & (M-C-k) {\bf Kill} the current (sub)thread. [Negative prefix:
 999       tick it, positive prefix: unmark it.]\\
1000                                 %
1001       T H     & {\bf Hide} all threads.\\
1002       T S     & {\bf Show} all hidden threads.\\
1003       T T     & (M-C-t) {\bf Toggle} threading.\\
1004     \end{keys}
1005     }
1006   }
1007
1008 \newcommand{\Scoring}{% formerly \Vsubmap
1009   {\esamepage
1010     Read about Adaptive Scoring in the online info.\\*
1011     \begin{keys}{\bf A p m l}
1012       V a     & {\bf Add} a new score entry, specifying all elements.\\
1013       V c     & Specify a new score file as {\bf current}.\\
1014       V e     & {\bf Edit} the current score alist.\\
1015       V f     & Edit a score {\bf file} and make it the current one.\\
1016       V m     & {\bf Mark} all articles below a given score as read.\\
1017       V s     & Set the {\bf score} of this article.\\
1018       V t     & Display all score rules applied to this article ({\bf track}).\\
1019       W w     & List {\bf words} used in scoring.\\
1020       V x     & {\bf Expunge} all low-scored articles. [score]\\
1021       V C     & {\bf Customize} the current score file through a user-friendly
1022       interface.\\
1023       V F     & {\bf Flush} the cache of score files.\\
1024       V R     & {\bf Re-score} the summary buffer.\\
1025       V S     & Display the {\bf score} of this article.\\
1026       \bf A p m l& Make a scoring entry based on this article.\\
1027     \end{keys}
1028     The four letters stand for:\\*
1029     \quad \B{A}ction: I)ncrease, L)ower;\\*
1030     \quad \B{p}art: a)uthor (from), s)ubject, x)refs (cross-posting), d)ate, l)ines,
1031     message-i)d, t)references (parent), f)ollowup, b)ody, h)ead (all headers);\\*
1032     \quad \B{m}atch type:\\*
1033     \qquad string: s)ubstring, e)xact, r)egexp, f)uzzy,\\*
1034     \qquad date: b)efore, a)t, n)this,\\*
1035     \qquad number: $<$, =, $>$;\\*
1036     \quad \B{l}ifetime: t)emporary, p)ermanent, i)mmediate.
1037
1038     If you type the second letter in uppercase, the remaining two are assumed
1039     to be s)ubstring and t)emporary.
1040     If you type the third letter in uppercase, the last one is assumed to be
1041     t)emporary.
1042
1043     \quad Extra keys for manual editing of a score file:\\*
1044     \begin{keys}{C-c C-c}
1045       C-c C-c & Finish editing the score file.\\
1046       C-c C-d & Insert the current {\bf date} as number of days.\\
1047     \end{keys}
1048     }
1049   }
1050
1051 \newcommand{\ExtractSeries}{% formerly \Xsubmap
1052   {\esamepage
1053     Gnus recognizes if the current article is part of a series (multipart
1054     posting whose parts are identified by numbers in their subjects, e.g.{}
1055     1/10\dots10/10) and processes the series accordingly. You can mark and
1056     process more than one series at a time. If the posting contains any
1057     archives, they are expanded and gathered in a new group.\\*
1058     \begin{keys}{X p}
1059       X b     & Un-{\bf binhex} these series. [p/p]\\
1060       X o     & Simply {\bf output} these series (no decoding). [p/p]\\
1061       X p     & Unpack these {\bf postscript} series. [p/p]\\
1062       X s     & Un-{\bf shar} these series. [p/p]\\
1063       X u     & {\bf Uudecode} these series. [p/p]\\
1064     \end{keys}
1065
1066     Each one of these commands has four variants:\\*
1067     \begin{keys}{X v \bf Z}
1068       X   \bf z & Decode these series. [p/p]\\
1069       X   \bf Z & Decode and save these series. [p/p]\\
1070       X v \bf z & Decode and view these series. [p/p]\\
1071       X v \bf Z & Decode, save and view these series. [p/p]\\
1072     \end{keys}
1073     where {\bf z} or {\bf Z} identifies the decoding method (b, o, p, s, u).
1074
1075     An alternative binding for the most-often used of these commands is\\*
1076     \begin{keys}{C-c C-v C-v}
1077       C-c C-v C-v & (X v u) Uudecode and view these series. [p/p]\\
1078     \end{keys}
1079     }}
1080
1081 \newcommand{\ExitSummary}{% formerly \Zsubmap
1082   {\esamepage
1083     \begin{keys}{Z G}
1084       Z Z     & (q, Z Q) Exit this group.\\
1085       Z E     & (Q) {\bf Exit} without updating the group information.\\
1086                                 %
1087       Z c     & (c) Mark all unticked articles as read ({\bf catch-up}) and exit.\\
1088       Z C     & Mark all articles as read ({\bf catch-up}) and exit.\\
1089                                 %
1090       Z n     & Mark all articles as read and go to the {\bf next} group.\\
1091       Z N     & Exit and go to {\bf the} next group.\\
1092       Z P     & Exit and go to the {\bf previous} group.\\
1093                                 %
1094       Z G     & (M-g) Check for new articles in this group ({\bf get}).\\
1095       Z R     & (C-x C-s) Exit this group, and then enter it again ({\bf reenter}).
1096       [Prefix: select all articles, read and unread.]\\
1097       Z s     & Update and save the dribble buffer. [Prefix: save .newsrc* as well]\\
1098     \end{keys}
1099     }
1100   }
1101
1102 \newcommand{\MsgCompositionGeneral}{%
1103   Press C-c ? in the composition-buffer to get this information.\\*
1104   {\esamepage
1105     \begin{keys}{C-c C-m}
1106                                 % sending
1107       C-c C-c & Send message and exit. [Prefix: send via foreign server]\\
1108       C-c C-s & Send message. [Prefix: send via foreign server]\\
1109       C-c C-d & Don't send message (save as \textbf{draft}).\\
1110       C-c C-k & \textbf{Kill} message-buffer.\\
1111       C-c C-m & {\bf Mail} reply to the address near point.
1112       [Prefix: include the original]\\
1113                                 % modify headers/body
1114       C-c C-o & Sort headers.\\
1115       C-c C-e & \textbf{Elide} region.\\
1116       C-c C-v & Kill everything outside region.\\
1117       C-c C-r & Do a \textbf{Rot-13} on the body.\\
1118       C-c C-w & Insert signature (from `message-signature-file').\\
1119       C-c C-z & Kill everything up to signature.\\
1120       C-c C-y & \textbf{Yank} original message.\\
1121       C-c C-q & Fill the yanked message.\\
1122       C-c M-C-y & \textbf{Yank} a buffer and quote it.\\
1123       M-RET   & Insert four newlines and format quoted text. [Prefix:
1124       justify as well]\\
1125       C-c M-r & \textbf{Rename} message buffer. [Prefix: ask for new name]\\
1126     \end{keys}
1127     }
1128   }
1129
1130 \newcommand{\MsgCompositionMovementArticle}{%
1131   The following functions create the header-field if necessary.\\*
1132   {\esamepage
1133     \begin{keys}{C-c C-f C-u}
1134       C-c TAB & Move to \textbf{signature}.\\
1135       C-c C-b & Move to \textbf{body}.\\
1136       C-c C-f C-t & (C-c C-t) Move to \textbf{To:}.\\
1137       C-c C-f C-c & Move to \textbf{Cc:}.\\
1138       C-c C-f C-b & Move to \textbf{Bcc:}.\\
1139       C-c C-f C-w & Move to \textbf{Fcc:}.\\
1140       C-c C-f C-s & Move to \textbf{Subject:}.\\
1141       C-c C-f C-r & Move to \textbf{Reply-To:}.\\
1142       C-c C-f C-f & Move to \textbf{Followup-To:}.\\
1143       C-c C-f C-n & (C-c C-n) Move to \textbf{Newsgroups:}.\\
1144       C-c C-f C-u & Move to \textbf{Summary:}.\\
1145       C-c C-f C-k & Move to \textbf{Keywords:}.\\
1146       C-c C-f C-d & Move to \textbf{Distribution:}.\\
1147       C-c C-f C-m & Move to \textbf{Mail-Followup-To:}.\\
1148       C-c C-f C-o & Move to \textbf{From:}.\\
1149       C-c C-f C-a & Insert a reasonable \textbf{Mail-Followup-To:} for
1150       an unsubscribed list. [Prefix: include addresses in \textbf{Cc:}]\\
1151       C-c C-f TAB & (C-c C-u) Move to \textbf{Importance:}.\\
1152       C-c M-n     & Insert \textbf{Disposition-Notification-To:}
1153       (request receipt).\\
1154     \end{keys}
1155     }
1156   }
1157
1158 \newcommand{\MsgCompositionMML}{%
1159   {\esamepage
1160     \begin{keys}{C-c C-m P}
1161       C-c C-m f   & (C-c C-a) Attach \textbf{file}.\\
1162       C-c C-m b   & Attach contents of \textbf{buffer}.\\
1163       C-c C-m e   & Attach \textbf{external} file (ftp..).\\
1164       C-c C-m P   & Create MIME-\textbf{preview} (new
1165       buffer). [Prefix: show raw MIME preview]\\
1166       C-c C-m v   & \textbf{Validate} article.\\
1167       C-c C-m p   & Insert \textbf{part}.\\
1168       C-c C-m m   & Insert \textbf{multi}-part.\\
1169       C-c C-m q   & \textbf{Quote} region.\\
1170       C-c C-m c s & Encrypt message using \textbf{S/MIME}.\\
1171       C-c C-m c o & Encrypt message using PGP.\\
1172       C-c C-m c p & Encrypt message using \textbf{PGP/MIME}.\\
1173       C-c C-m s s & Sign message using \textbf{S/MIME}.\\
1174       C-c C-m s o & Sign message using PGP.\\
1175       C-c C-m s p & Sign message using \textbf{PGP/MIME}.\\
1176       C-c C-m C-n & Remove security related MML tags from message.\\
1177                                 % TODO: narrow headers (C-c C-m n) ?
1178     \end{keys}
1179     }
1180   }
1181
1182 %% TODO:
1183 \newcommand{\ServerMode}{%
1184   {\esamepage
1185     To enter this mode, press \^{} while in Group mode.\\*
1186     \begin{keys}{SPC}
1187       SPC     & (RET) Browse this server.\\
1188       a       & {\bf Add} a new server.\\
1189       c       & {\bf Copy} this server.\\
1190       e       & {\bf Edit} a server.\\
1191       k       & {\bf Kill} this server. [scope]\\
1192       l       & {\bf List} all servers.\\
1193       q       & Return to the group buffer ({\bf quit}).\\
1194       s       & Request that the server scan its sources for new articles.\\
1195       g       & Request that the server regenerate its data.\\
1196       y       & {\bf Yank} the previously killed server.\\
1197       O       & Try to {\bf open} a connection to this server.\\
1198       C       & {\bf Close} connection to this server.\\
1199       D       & Mark this server as unreachable ({\bf deny}).\\
1200       M-o     & {\bf Open} the connection to all servers.\\
1201       M-c     & {\bf Close} the connection to all servers.\\
1202       R       & Make all denied servers into closed servers.\\
1203       L       & Set server status to offline.\\
1204     \end{keys}
1205     }
1206   }
1207
1208 \newcommand{\BrowseServer}{%
1209   {\esamepage
1210     To enter this mode, press `B' while in Group mode.\\*
1211     \begin{keys}{RET}
1212       RET     & Enter the current group.\\
1213       SPC     & Enter the current group and display the first article.\\
1214       ?       & Give a very short help message.\\
1215       n       & Go to the {\bf next} group. [distance]\\
1216       p       & Go to the {\bf previous} group. [distance]\\
1217       q       & (l) {\bf Quit} browse mode.\\
1218       u       & Subscribe to the current group. [scope]\\
1219     \end{keys}
1220     }
1221   }
1222
1223 \newcommand{\GroupUnplugged}{%
1224   {\esamepage
1225     \begin{keys}{J S}
1226       J j & Toggle plugged-state.\\
1227       J s & Fetch articles from all groups for offline-reading.\\
1228       J u & Fetch all eligible articles from this group.\\
1229       J S & \textbf{Send} all sendable messages in the drafts group.\\
1230                                 %
1231       J c & Enter \textbf{category} buffer.\\
1232       J a & \textbf{Add} this group to an Agent category [p/p].\\
1233       J r & \textbf{Remove} this group from its Agent category [p/p].\\
1234       J Y & Synchronize flags changed while unplugged with remote server.\\
1235     \end{keys}
1236     }
1237   }
1238
1239 \newcommand{\SummaryUnplugged}{%
1240   {\esamepage
1241     \begin{keys}{J M-\#}
1242       J \#   & \textbf{Mark} the article for downloading.\\
1243       J M-\# & \textbf{Unmark} the article for downloading.\\
1244       @      & \textbf{Toggle} whether to download the article.\\
1245       J c    & Mark all undownloaded articles as read (\textbf{catch-up}).\\
1246       J u    & Download all downloadable articles from group.\\
1247     \end{keys}
1248     }
1249   }
1250
1251 \newcommand{\ServerUnplugged}{%
1252   {\esamepage
1253     \begin{keys}{J a}
1254       J a & \textbf{Add} the current server to the list of servers covered
1255       by the agent.\\
1256       J r & \textbf{Remove} the current server from the list of servers covered
1257       by the agent.\\
1258     \end{keys}
1259     }
1260   }
1261
1262 % end   {gnusref} % % % % % % % % % % % % % % % % % % % % % % % % % %
1263
1264
1265 % o some things might not be updated: scoring and server modes, maybe more
1266 % o Gnus Unplugged category-buffer commands need to be written
1267
1268 \begin{document}
1269
1270 \def\progver{5.10}\def\refver{5.10-1} % program and refcard versions
1271 \def\date{Jan 10th, 2004}
1272 \def\author{Gnus Bugfixing Girls + Boys $<$bugs@gnus.org$>$}
1273
1274 \ifthenelse{\isundefined{\booklettrue}}{ % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1275   \raggedbottom\raggedright
1276   \twocolumn
1277   % use \tiny to shrink it to 4 pages (needs a high-resolution printer though)
1278   % \tiny
1279   \scriptsize
1280   \pagestyle{plain}
1281   \Title
1282   \par
1283   \Logo{refcard}
1284 }{
1285   \setcounter{page}{0}
1286   \thispagestyle{empty}
1287   \vspace*{\fill}
1288   \Title
1289   \vspace{0.4in}
1290   \Logo{booklet}
1291   \vspace*{\fill}
1292   \pagebreak
1293 }%ifbooklet% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1294
1295 % TODO: how does this work ?
1296 %\tableofcontents
1297
1298 \Notes
1299 %
1300
1301 \section*{Group-Mode}
1302 \GroupModeGeneral
1303     \subsection*{Group Subscribedness-Levels}
1304     \GroupLevels
1305     \subsection*{List Groups}
1306     \ListGroups
1307     \subsection*{Create/Edit Foreign Groups}
1308     \CreateEditGroups
1309     \subsection*{Unsubscribe, Kill and Yank Groups}
1310     \SubscribeKillYankGroups
1311     \subsection*{Mark Groups}
1312     \MarkGroups
1313     \subsection*{Group-Unplugged}
1314     \GroupUnplugged
1315 % topics in group-mode
1316     \subsection*{Group Topics}
1317     \GroupTopicsGeneral
1318     \subsubsection*{Topic Sorting}
1319     \TopicSorting
1320
1321 % \ifthenelse{\isundefined{\booklettrue}}{}{\pagebreak}
1322
1323 % summary-mode
1324 \section*{Summary Mode}
1325 \SummaryModeGeneral
1326     \subsection*{Select Articles}
1327     \SelectArticles
1328 %
1329     \subsection*{Threading}
1330     \Threading
1331 %
1332     \subsection*{Limiting}
1333     \Limiting
1334     \subsection*{Sort the Summary-Buffer}
1335     \SortSummary
1336     \subsection*{Score (Value) Commands}
1337     \Scoring
1338
1339 \ifthenelse{\isundefined{\booklettrue}}{% ifcard %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1340   \subsection*{Output Articles}
1341   \OutputArticles
1342   \subsection*{Extract Series (Uudecode etc)}
1343   \ExtractSeries
1344 }{}%ifcard% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1345
1346     \subsection*{MIME operations from the Summary-Buffer}
1347     \MIMESummary
1348
1349 \ifthenelse{\isundefined{\booklettrue}}{}{% ifbooklet %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1350   \subsection*{Extract Series (Uudecode etc)}
1351   \ExtractSeries
1352   \subsection*{Output Articles}
1353   \OutputArticles
1354 }%ifbooklet% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1355
1356 %
1357     \subsection*{Post, Followup, Reply, Forward, Cancel}
1358     \PostReplyetc
1359
1360 \ifthenelse{\isundefined{\booklettrue}}{\newpage}{}% newpage ifcard
1361
1362       \subsection*{Message Composition}
1363
1364     \MsgCompositionGeneral
1365         \subsubsection*{Jumping in message-buffer}
1366         \MsgCompositionMovementArticle
1367         \subsubsection*{Attachments/MML}
1368         \MsgCompositionMML
1369 % marking articles
1370     \subsection*{Mark Articles}
1371     \MarkArticlesGeneral
1372         \subsubsection*{Mark Based on Score}
1373         \MarkByScore
1374         \subsubsection*{The Process Mark}
1375         \ProcessMark
1376         \subsubsection*{Mark Indication-Characters}
1377         \MarkCharacters
1378 %
1379 \ifthenelse{\isundefined{\booklettrue}}{\newpage}{}%
1380
1381     \subsection*{Summary-Unplugged}
1382     \SummaryUnplugged
1383     \subsection*{Mail-Group Commands}
1384     \MailGroups
1385     \subsection*{Draft-Group Commands}
1386     \DraftGroup
1387 % exiting
1388     \subsection*{Exit the Summary-Buffer}
1389     \ExitSummary
1390 %
1391 %
1392 \section*{Article Mode (reading)}
1393 \ArticleModeGeneral
1394     \subsection*{Wash the Article-Buffer}
1395     \WashArticle
1396     \subsubsection*{Blank Lines and Whitespace}
1397     \BlankAndWhitespace
1398     \subsubsection*{Picons, X-faces, Smileys}
1399     \Picons
1400     \subsubsection*{Time and Date}
1401     \TimeAndDate
1402     \subsection*{Hide/Highlight Parts of the Article}
1403     \HideHighlightArticle
1404     \subsection*{MIME operations from the Article-Buffer (reading)}
1405     \MIMEArticleMode
1406 %
1407 %
1408 \section*{Server Mode}
1409 \ServerMode
1410     \subsection*{Unplugged-Server}
1411     \ServerUnplugged
1412 %
1413 %
1414 \section*{Browse Server Mode}
1415 \BrowseServer
1416
1417 %\pagebreak
1418 \vspace*{\fill}
1419 \Copyright
1420
1421 \end{document}
1422
1423 %%% Local Variables:
1424 %%% mode: latex
1425 %%% TeX-master: t
1426 %%% End:
1427
1428 % arch-tag: be438b0e-6832-4afb-8c56-5f84743e5cd1