Makefile.in

   1 ### @configure_input@
   2
   3 # Copyright (C) 1992-2013 Free Software Foundation, Inc.
   4
   5 # This file is part of GNU Emacs.
   6
   7 # GNU Emacs is free software: you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation, either version 3 of the License, or
  10 # (at your option) any later version.
  11
  12 # GNU Emacs is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16
  17 # You should have received a copy of the GNU General Public License
  18 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
  19
  20 ### Commentary:
  21
  22 # make all      to compile and build Emacs.
  23 # make install  to install it.
  24 # make TAGS     to update tags tables.
  25 #
  26 # make clean  or  make mostlyclean
  27 #      Delete all files from the current directory that are normally
  28 #      created by building the program.  Don't delete the files that
  29 #      record the configuration.  Also preserve files that could be made
  30 #      by building, but normally aren't because the distribution comes
  31 #      with them.
  32 #
  33 #      Delete `.dvi' files here if they are not part of the distribution.
  34 #
  35 # make distclean
  36 #      Delete all files from the current directory that are created by
  37 #      configuring or building the program.  If you have unpacked the
  38 #      source and built the program without creating any other files,
  39 #      `make distclean' should leave only the files that were in the
  40 #      distribution.
  41 #
  42 # make maintainer-clean
  43 #      Delete everything from the current directory that can be
  44 #      reconstructed with this Makefile.  This typically includes
  45 #      everything deleted by distclean, plus more: .elc files,
  46 #      C source files produced by Bison, tags tables, info files,
  47 #      and so on.
  48 #
  49 # make extraclean
  50 #      Still more severe - delete backup and autosave files, too.
  51 #
  52 # make bootstrap
  53 #      Removes all the compiled files to force a new bootstrap from a
  54 #      clean slate, and then build in the normal way.
  55 #
  56 # make docs
  57 #      Make Emacs documentation files from their sources; requires makeinfo.
  58
  59 SHELL = @SHELL@
  60
  61 # This may not work with certain non-GNU make's.  It only matters when
  62 # inheriting a CDPATH not starting with the current directory.
  63 CDPATH=
  64
  65 # If Make doesn't predefine MAKE, set it here.
  66 @SET_MAKE@
  67
  68 # Prevent submakes from outputting "Entering directory ..." and
  69 # "Leaving directory..." diagnostics that would mess up 'make echo-info'.
  70 QUIET_SUBMAKE = MAKELEVEL=0
  71
  72 # ==================== Things `configure' Might Edit ====================
  73
  74 cache_file = @cache_file@
  75 CONFIGURE_FLAGS = --cache-file=$(cache_file)
  76
  77 CC=@CC@
  78 CFLAGS=@CFLAGS@
  79 LDFLAGS=@LDFLAGS@
  80 CPPFLAGS=@CPPFLAGS@
  81 EXEEXT=@EXEEXT@
  82
  83 ### These help us choose version- and architecture-specific directories
  84 ### to install files in.
  85
  86 ### This should be the number of the Emacs version we're building,
  87 ### like `18.59' or `19.0'.
  88 version=@version@
  89
  90 ### This should be the name of the configuration we're building Emacs
  91 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  92 configuration=@configuration@
  93
  94 ### The nt/ subdirectory gets built only for MinGW
  95 NTDIR=@NTDIR@
  96
  97 # ==================== Where To Install Things ====================
  98
  99 # Location to install Emacs.app under GNUstep / Mac OS X.
 100 # Later values may use these.
 101 ns_appbindir=@ns_appbindir@
 102 ns_appresdir=@ns_appresdir@
 103 # Either yes or no depending on whether this is a relocatable Emacs.app.
 104 ns_self_contained=@ns_self_contained@
 105
 106 # The default location for installation.  Everything is placed in
 107 # subdirectories of this directory.  The default values for many of
 108 # the variables below are expressed in terms of this one, so you may
 109 # not need to change them.  This defaults to /usr/local.
 110 prefix=@prefix@
 111
 112 # Like `prefix', but used for architecture-specific files.
 113 exec_prefix=@exec_prefix@
 114
 115 # Where to install Emacs and other binaries that people will want to
 116 # run directly (like etags).
 117 bindir=@bindir@
 118
 119 # The root of the directory tree for read-only architecture-independent
 120 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 121 datarootdir=@datarootdir@
 122
 123 # Where to install architecture-independent data files.  ${lispdir}
 124 # and ${etcdir} are subdirectories of this.
 125 datadir=@datadir@
 126
 127 # Where to install and expect the files that Emacs modifies as it
 128 # runs.  These files are all architecture-independent.
 129 # Right now, this is not used.
 130 sharedstatedir=@sharedstatedir@
 131
 132 # Where to install and expect executable files to be run by Emacs
 133 # rather than directly by users (and other architecture-dependent
 134 # data, although Emacs does not have any).  The executables
 135 # are actually installed in ${archlibdir}, which is (normally)
 136 # a subdirectory of this.
 137 libexecdir=@libexecdir@
 138
 139 # Where to install Emacs's man pages.
 140 # Note they contain cross-references that expect them to be in section 1.
 141 mandir=@mandir@
 142 man1dir=$(mandir)/man1
 143
 144 # Where to install and expect the info files describing Emacs.
 145 infodir=@infodir@
 146 # Info files not in the doc/misc directory (we get those via make echo-info).
 147 INFO_EXT=@INFO_EXT@
 148 INFO_NONMISC=emacs$(INFO_EXT) eintr$(INFO_EXT) elisp$(INFO_EXT)
 149
 150 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
 151 HAVE_MAKEINFO=@HAVE_MAKEINFO@
 152
 153 # Directory for local state files for all programs.
 154 localstatedir=@localstatedir@
 155
 156 # Where to look for bitmap files.
 157 bitmapdir=@bitmapdir@
 158
 159 # Where to find the source code.  The source code for Emacs's C kernel is
 160 # expected to be in ${srcdir}/src, and the source code for Emacs's
 161 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 162 # set by the configure script's `--srcdir' option.
 163
 164 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 165 srcdir=@srcdir@
 166
 167 # Where the manpage source files are kept.
 168 mansrcdir=$(srcdir)/doc/man
 169
 170 # Tell make where to find source files; this is needed for the makefiles.
 171 VPATH=@srcdir@
 172
 173 # Where to find the application default.
 174 x_default_search_path=@x_default_search_path@
 175
 176 # Where the etc/emacs.desktop file is to be installed.
 177 desktopdir=$(datarootdir)/applications
 178
 179 # Where the etc/images/icons/hicolor directory is to be installed.
 180 icondir=$(datarootdir)/icons
 181
 182 # The source directory for the icon files.
 183 iconsrcdir=$(srcdir)/etc/images/icons
 184
 185 # ==================== Emacs-specific directories ====================
 186
 187 # These variables hold the values Emacs will actually use.  They are
 188 # based on the values of the standard Make variables above.
 189
 190 # Where to install the lisp, leim files distributed with
 191 # Emacs.  This includes the Emacs version, so that the
 192 # lisp files for different versions of Emacs will install
 193 # themselves in separate directories.
 194 lispdir=@lispdir@
 195 leimdir=@leimdir@
 196
 197 # Directories Emacs should search for standard lisp files.
 198 # The default is ${lispdir}:${leimdir}.
 199 standardlisppath=@standardlisppath@
 200
 201 # Directories Emacs should search for lisp files specific to this
 202 # site (i.e. customizations), before consulting ${standardlisppath}.
 203 # This should be a colon-separated list of directories.
 204 locallisppath=@locallisppath@
 205
 206 # Where Emacs will search to find its lisp files.  Before
 207 # changing this, check to see if your purpose wouldn't
 208 # better be served by changing locallisppath.  This
 209 # should be a colon-separated list of directories.
 210 # The default is ${locallisppath}:${standardlisppath}.
 211 lisppath=@lisppath@
 212
 213 # Where Emacs will search for its lisp files while
 214 # building.  This is only used during the process of
 215 # compiling Emacs, to help Emacs find its lisp files
 216 # before they've been installed in their final location.
 217 # This should be a colon-separated list of directories.
 218 # Normally it points to the lisp/ directory in the sources.
 219 buildlisppath=${srcdir}/lisp
 220
 221 # Where to install the other architecture-independent
 222 # data files distributed with Emacs (like the tutorial,
 223 # the cookie recipes and the Zippy database). This path
 224 # usually contains the Emacs version number, so the data
 225 # files for multiple versions of Emacs may be installed
 226 # at once.
 227 etcdir=@etcdir@
 228
 229 # Where to put executables to be run by Emacs rather than
 230 # the user.  This path usually includes the Emacs version
 231 # and configuration name, so that multiple configurations
 232 # for multiple versions of Emacs may be installed at
 233 # once.
 234 archlibdir=@archlibdir@
 235
 236 # Where to put the etc/DOC file.
 237 etcdocdir=@etcdocdir@
 238
 239 # Where to install Emacs game score files.
 240 gamedir=@gamedir@
 241
 242 # ==================== Utility Programs for the Build ====================
 243
 244 # Allow the user to specify the install program.
 245 # Note that if the system does not provide a suitable install,
 246 # configure will use build-aux/install-sh.  Annoyingly, it does
 247 # not use an absolute path.  So we must take care to always run
 248 # INSTALL-type commands from the directory containing the Makefile.
 249 # This explains (I think) the cd thisdir seen in several install rules.
 250 INSTALL = @INSTALL@
 251 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 252 INSTALL_DATA = @INSTALL_DATA@
 253 INSTALL_INFO = @INSTALL_INFO@
 254 # By default, we uphold the dignity of our programs.
 255 INSTALL_STRIP =
 256 MKDIR_P = @MKDIR_P@
 257 # Create a link to a file in the same directory as the target.
 258 LN_S_FILEONLY = @LN_S_FILEONLY@
 259
 260 # We use gzip to compress installed .el files.
 261 GZIP_PROG = @GZIP_PROG@
 262
 263 # ============================= Targets ==============================
 264
 265 # Program name transformation.
 266 TRANSFORM = @program_transform_name@
 267
 268 # What emacs should be called when installed.
 269 EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'`
 270 EMACS = ${EMACS_NAME}${EXEEXT}
 271 EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
 272
 273 # Subdirectories to make recursively.
 274 SUBDIR = $(NTDIR) lib lib-src src lisp leim
 275
 276 # The subdir makefiles created by config.status.
 277 SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
 278 SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
 279
 280 # Subdirectories to install, and where they'll go.  lib-src's and nt's
 281 # makefiles know how to install them, so we don't do that here.
 282 # Directories that cannot simply be copied, eg info, are treated
 283 # separately.  quail appears twice because in out-of-tree builds, it
 284 # exists twice.
 285 COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
 286 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail
 287
 288 all: ${SUBDIR}
 289
 290 .PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 FRC
 291
 292 removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g'
 293
 294 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 295 # See comments in configure.ac for why it is done this way, as opposed
 296 # to just letting configure generate epaths.h from epaths.in in a
 297 # similar way to how Makefile is made from Makefile.in.
 298 epaths-force: FRC
 299         @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
 300           locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
 301           buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
 302           x_default_search_path=`echo ${x_default_search_path}`; \
 303           gamedir=`echo ${gamedir}`; \
 304           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 305           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
 306           -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
 307           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 308           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 309           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 310           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 311           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 312           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 313           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 314           -e 's;\(#.*PATH_DOC\).*$$;\1 "${etcdocdir}";') &&             \
 315         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 316
 317 # Convert MSYS-style /x/foo or Windows-style x:\foo file names
 318 # into x:/foo that Windows can grok.
 319 msys_to_w32=sed -e 's,\\\\,/,g' -e 's,^/\([A-Za-z]\)/,\1:/,'
 320
 321 # Transform directory search path and its components.  Original can
 322 # be MSYS or Windows style.  Set path separator to ";", directory
 323 # separator to "/" and transform MSYS-style "/c/" to "c:/".
 324 # Remove empty path components and escape semicolons.
 325 msys_lisppath_to_w32=sed -e 's,\\\\,/,g'                        \
 326         -e 's,\(^\|[:;]\)\([A-Za-z]\):/,\1/\2/,g'               \
 327         -e 's/:/;/g' -e 's,\(^\|;\)/\([A-Za-z]\)/,\1\2:/,g'     \
 328         -e 's/;\+/;/g' -e 's/^;//' -e 's/;$$//' -e 's/;/\\\\;/g'
 329
 330 # Replace "${prefix}" with '%emacs_dir%' (which expands to install
 331 # directory at runtime).
 332 msys_prefix_subst=sed -e 's!\(^\|;\)'"$${prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
 333
 334 # Quote Sed special characters (except backslash and newline) with
 335 # a double backslash.
 336 msys_sed_sh_escape=sed -e 's/[];$$*.^[]/\\\\&/g'
 337
 338 # The w32 build needs a slightly different editing, and it uses
 339 # nt/epaths.nt as the template.
 340 # Use the value of ${locallisppath} supplied by `configure',
 341 # to support the --enable-locallisppath argument.
 342 epaths-force-w32: FRC
 343         @(w32srcdir=`echo "${srcdir}" | ${msys_to_w32}` ;       \
 344           prefixpattern=`echo '${prefix}' | ${msys_to_w32} | ${msys_sed_sh_escape}` ; \
 345           locallisppath=`echo '${locallisppath}' | ${msys_lisppath_to_w32} | ${msys_prefix_subst}` ; \
 346           sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$          \
 347           -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
 348           -e '/^.*#/s/@VER@/${version}/g'                       \
 349           -e '/^.*#/s/@CFG@/${configuration}/g'                 \
 350           -e "/^.*#/s|@SRC@|$${w32srcdir}|g") &&                \
 351         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 352
 353 # If lib/Makefile would build files in '.', then build them before
 354 # building 'lib', to avoid races with parallel makes.
 355 lib: am--refresh
 356
 357 lib-src src: $(NTDIR) lib
 358
 359 src: lib-src
 360
 361 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'
 362 # and `leim'.
 363 lisp leim: src
 364
 365 # These targets should be "${SUBDIR} without `src'".
 366 lib lib-src lisp leim nt: Makefile FRC
 367         cd $@ && $(MAKE) all $(MFLAGS)                         \
 368           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 369           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 370
 371 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
 372 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
 373 # constructed yet) or the empty string (otherwise).
 374 # src/Makefile.in uses it to implement conditional dependencies, so that
 375 # files that need bootstrap-emacs to be built do not additionally need
 376 # to be kept fresher than bootstrap-emacs.  Otherwise changing a single
 377 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
 378 # all preloaded elisp files, and only then dump the actual src/emacs, which
 379 # is not wrong, but is overkill in 99.99% of the cases.
 380 src: Makefile FRC
 381         dirstate='.bzr/checkout/dirstate';                              \
 382         vcswitness='$$(srcdir)/../'$$dirstate;                          \
 383         [ -r "$(srcdir)/$$dirstate" ] || vcswitness='';                 \
 384         cd $@ || exit;                                                  \
 385         boot=bootstrap-emacs$(EXEEXT);                                  \
 386         [ ! -x "$$boot" ] || boot='';                                   \
 387         $(MAKE) all $(MFLAGS)                                           \
 388           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}'          \
 389           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"   \
 390           VCSWITNESS="$$vcswitness"
 391
 392 blessmail: Makefile src FRC
 393         cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \
 394           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 395
 396 # We used to have one rule per */Makefile.in, but that leads to race
 397 # conditions with parallel makes, so let's assume that the time stamp on
 398 # ./Makefile is representative of the time stamp on all the other Makefiles.
 399 #
 400 # config.status overrides MAKEFILE_NAME with a bogus name when creating
 401 # src/epaths.h, so that 'make epaths-force' does not recursively invoke
 402 # config.status and overwrite config.status while executing it (Bug#11214).
 403 #
 404 # 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
 405 # then attempts to build that file.  This forces 'Makefile', 'lib/Makefile',
 406 # etc. to be built without running into similar recursion problems.
 407 MAKEFILE_NAME = Makefile
 408 $(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
 409           $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk
 410         MAKE='$(MAKE)' ./config.status
 411
 412 # Don't erase these files if make is interrupted while refreshing them.
 413 .PRECIOUS: Makefile config.status
 414
 415 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 416         if [ -x ./config.status ]; then \
 417             $(CFG) ./config.status --recheck;   \
 418         else                            \
 419             $(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \
 420         fi
 421
 422 AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
 423
 424 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 425         cd ${srcdir} && autoconf
 426
 427 ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4
 428 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
 429         cd $(srcdir) && aclocal -I m4
 430
 431 AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \
 432   $(srcdir)/lib/gnulib.mk
 433 $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
 434         cd $(srcdir) && automake --gnu -a -c lib/Makefile
 435
 436 # Regenerate files that this makefile would have made, if this makefile
 437 # had been built by Automake.  The name 'am--refresh' is for
 438 # compatibility with subsidiary Automake-generated makefiles.
 439 am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
 440 .PHONY: am--refresh
 441
 442 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 443         @ # Usually, there's no need to rebuild src/config.in just
 444         @ # because stamp-h.in has changed (since building stamp-h.in
 445         @ # refreshes config.in as well), but if config.in is missing
 446         @ # then we really need to do something more.
 447         [ -r "$@" ] || ( cd ${srcdir} && autoheader )
 448 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 449         cd ${srcdir} && autoheader
 450         rm -f $(srcdir)/src/stamp-h.in
 451         echo timestamp > $(srcdir)/src/stamp-h.in
 452
 453 # ==================== Installation ====================
 454
 455 .PHONY: install install-arch-dep install-arch-indep install-etcdoc install-info
 456 .PHONY: install-man install-etc install-strip install-$(NTDIR)
 457 .PHONY: uninstall uninstall-$(NTDIR)
 458
 459 ## If we let lib-src do its own installation, that means we
 460 ## don't have to duplicate the list of utilities to install in
 461 ## this Makefile as well.
 462
 463 install: all install-arch-indep install-etcdoc install-arch-dep install-$(NTDIR) blessmail
 464         @true
 465
 466 ## Ensure that $subdir contains a subdirs.el file.
 467 ## Here and elsewhere, we set the umask so that any created files are
 468 ## world-readable.
 469 ## TODO it might be good to warn about non-standard permissions of
 470 ## pre-existing directories, but that does not seem easy.
 471 write_subdir=if [ -f $${subdir}/subdirs.el ]; \
 472         then true; \
 473         else \
 474           umask 022; \
 475           ${MKDIR_P} $${subdir}; \
 476           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 477            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 478             > $${subdir}/subdirs.el; \
 479         fi
 480
 481 ### Install the executables that were compiled specifically for this machine.
 482 ### We do install-arch-indep first because the executable needs the
 483 ### Lisp files and DOC file to work properly.
 484 install-arch-dep: src install-arch-indep install-etcdoc install-$(NTDIR)
 485         umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
 486         cd lib-src && \
 487           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 488             exec_prefix=${exec_prefix} bindir=${bindir} \
 489             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 490             INSTALL_STRIP=${INSTALL_STRIP}
 491         if test "${ns_self_contained}" = "no"; then \
 492           ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
 493           chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) || true; \
 494           if test "x${NO_BIN_LINK}" = x; then \
 495             rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
 496             cd $(DESTDIR)${bindir} && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
 497           fi; \
 498         else \
 499           subdir=${ns_appresdir}/site-lisp; \
 500           ${write_subdir} || exit 1; \
 501           rm -rf ${ns_appresdir}/share; \
 502         fi
 503
 504 ### Windows-specific install target for installing programs produced
 505 ### in nt/, and its Posix do-nothing shadow.
 506 install-:
 507 install-nt:
 508         cd $(NTDIR) && \
 509           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 510             exec_prefix=${exec_prefix} bindir=${bindir} \
 511             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 512             INSTALL_STRIP=${INSTALL_STRIP}
 513
 514 ## In the share directory, we are deleting:
 515 ## applications (with emacs.desktop, also found in etc/)
 516 ## emacs (basically empty except for unneeded site-lisp directories)
 517 ## icons (duplicates etc/images/icons/hicolor)
 518
 519 ## This is install-etc for everything except self-contained-ns builds.
 520 ## For them, it is empty.
 521 INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
 522
 523 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 524 ## Needs to be the user running install, so configure can't set it.
 525 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 526           `id -un 2> /dev/null`; do \
 527           [ -n "$${installuser}" ] && break ; \
 528         done
 529
 530 ### Install the files that are machine-independent.
 531 ### Most of them come straight from the distribution; the exception is
 532 ### the DOC file, which is copied from the build directory.
 533
 534 ## We delete each directory in ${COPYDESTS} before we copy into it;
 535 ## that way, we can reinstall over directories that have been put in
 536 ## place with their files read-only (perhaps because they are checked
 537 ## into RCS).  In order to make this safe, we make sure that the
 538 ## source exists and is distinct from the destination.
 539
 540 ## We delete etc/DOC* because there may be irrelevant DOC files from
 541 ## other builds in the source directory.  This is ok because we just
 542 ## deleted the entire installed etc/ directory and recreated it.
 543 ## install-etcdoc installs the relevant DOC.
 544
 545 ## Note that we install etc/refcards/*.ps if present.
 546 ## TODO we should compress these if GZIP_PROG is set.
 547 ## It would be simpler to have a separate install rule for etc/refcards
 548 ## (maybe move it to doc/refcards?).
 549
 550 ## Note that the Makefiles in the etc directory are potentially useful
 551 ## in an installed Emacs, so should not be excluded.
 552
 553 ## We used to create locallisppath, but if it points to non-standard
 554 ## locations, is not really Emacs's job to create these directories,
 555 ## so it is no longer done.
 556
 557 ## Note that we use tar instead of plain old cp -R/-r because the latter
 558 ## is apparently not portable (even in 2012!).
 559 ## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
 560 ## I have no idea which platforms Emacs supports where cp -R does not
 561 ## work correctly, and therefore no idea when tar can be replaced.
 562 ## See also these comments from 2004 about cp -r working fine:
 563 ## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
 564 install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
 565         -set ${COPYDESTS} ; \
 566         unset CDPATH; \
 567         $(set_installuser); \
 568         for dir in ${COPYDIR} ; do \
 569           [ -d $${dir} ] || exit 1 ; \
 570           dest=$$1 ; shift ; \
 571           [ -d $${dest} ] && \
 572             [ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \
 573             continue ; \
 574           if [ "$${dir}" = "leim/quail" ]; then \
 575             [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \
 576               continue ; \
 577           else \
 578             rm -rf $${dest} ; \
 579             umask 022; ${MKDIR_P} $${dest} ; \
 580           fi ; \
 581           echo "Copying $${dir} to $${dest}..." ; \
 582           (cd $${dir}; tar -chf - . ) \
 583             | (cd $${dest}; umask 022; \
 584                tar -xvf - && cat > /dev/null) || exit 1; \
 585           if [ "$${dir}" = "${srcdir}/etc" ]; then \
 586               rm -f $${dest}/DOC* ; \
 587               rm -f $${dest}/refcards/*.aux $${dest}/refcards/*.dvi; \
 588               rm -f $${dest}/refcards/*.log; \
 589           else true; \
 590           fi; \
 591           for subdir in `find $${dest} -type d -print` ; do \
 592             chmod a+rx $${subdir} ; \
 593             rm -f $${subdir}/.gitignore ; \
 594             rm -f $${subdir}/.arch-inventory ; \
 595             rm -f $${subdir}/.DS_Store ; \
 596             rm -f $${subdir}/\#* ; \
 597             rm -f $${subdir}/.\#* ; \
 598             rm -f $${subdir}/*~ ; \
 599             rm -f $${subdir}/*.orig ; \
 600             rm -f $${subdir}/ChangeLog* ; \
 601             [ "$${dir}" != "${srcdir}/etc" ] && \
 602               rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
 603           done ; \
 604           find $${dest} -exec chown $${installuser} {} ';' ;\
 605         done
 606         -rm -f $(DESTDIR)${leimdir}/leim-list.el
 607         ${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el
 608         -rm -f $(DESTDIR)${lispdir}/subdirs.el
 609         umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir}
 610         subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
 611           ${write_subdir}
 612         subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
 613           ${write_subdir} || true
 614         [ -z "${GZIP_PROG}" ] || \
 615           ( echo "Compressing *.el ..." ; \
 616             unset CDPATH; \
 617             thisdir=`/bin/pwd`; \
 618             for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \
 619               cd $${thisdir} ; \
 620               cd $${dir} || exit 1 ; \
 621               for f in `find . -name "*.elc" -print`; do \
 622                 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
 623               done ; \
 624             done )
 625         -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
 626
 627 ## The above chmods are needed because "umask 022; tar ..." is not
 628 ## guaranteed to do the right thing; eg if we are root and tar is
 629 ## preserving source permissions.
 630
 631 ## Note that install-arch-indep deletes and recreates the entire
 632 ## installed etc/ directory, so we need it to run before this does.
 633 install-etcdoc: src install-arch-indep
 634         -unset CDPATH; \
 635         umask 022; ${MKDIR_P} $(DESTDIR)${etcdocdir} ; \
 636         if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${etcdocdir}; /bin/pwd` ]; \
 637         then \
 638            docfile="DOC"; \
 639            echo "Copying etc/$${docfile} to $(DESTDIR)${etcdocdir} ..." ; \
 640            ${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${etcdocdir}/$${docfile}; \
 641            $(set_installuser); \
 642              chown $${installuser} $(DESTDIR)${etcdocdir}/$${docfile} || true ; \
 643         else true; fi
 644
 645 install-info: info
 646         umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
 647         -unset CDPATH; \
 648         thisdir=`/bin/pwd`; \
 649         [ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \
 650           (cd $(DESTDIR)${infodir};  \
 651            [ -f dir ] || \
 652              (cd $${thisdir}; \
 653               ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
 654            info_misc=`cd $${thisdir}/doc/misc && \
 655                 $(QUIET_SUBMAKE) $(MAKE) -s echo-info \
 656            `; \
 657            cd ${srcdir}/info ; \
 658            for elt in ${INFO_NONMISC} $${info_misc}; do \
 659               test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
 660               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 661                (cd $${thisdir}; \
 662                 ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
 663                 [ -n "${GZIP_PROG}" ] || continue ; \
 664                 rm -f $(DESTDIR)${infodir}/$$f.gz; \
 665                 ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
 666               done; \
 667              (cd $${thisdir}; \
 668               ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 669            done)
 670
 671 ## "gzip || true" is because some gzips exit with non-zero status
 672 ## if compression would not reduce the file size.  Eg, the gzip in
 673 ## OpenBSD 4.9 seems to do this (2013/03).  In Emacs, this can
 674 ## only happen with the tiny ctags.1 manpage.  We don't really care if
 675 ## ctags.1 is compressed or not.  "gzip -f" is another option here,
 676 ## but not sure if portable.
 677 install-man:
 678         umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
 679         thisdir=`/bin/pwd`; \
 680         cd ${mansrcdir}; \
 681         for page in *.1; do \
 682           dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
 683           (cd $${thisdir}; \
 684            ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${dest}); \
 685           [ -n "${GZIP_PROG}" ] || continue ; \
 686           rm -f $(DESTDIR)${man1dir}/$${dest}.gz; \
 687           ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${dest} || true; \
 688         done
 689
 690 ## Install those items from etc/ that need to end up elsewhere.
 691
 692 ## If you prefer, choose "emacs22" at installation time.
 693 ## Note: emacs22 does not have all the resolutions.
 694 EMACS_ICON=emacs
 695
 696 install-etc:
 697         umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
 698         tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \
 699         emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \
 700         sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \
 701           -e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \
 702           ${srcdir}/etc/emacs.desktop > $${tmp}; \
 703         ${INSTALL_DATA} $${tmp} $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop; \
 704         rm -f $${tmp}
 705         thisdir=`/bin/pwd`; \
 706         cd ${iconsrcdir} || exit 1; umask 022 ; \
 707         for dir in */*/apps */*/mimetypes; do \
 708           [ -d $${dir} ] || continue ; \
 709           ( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \
 710           for icon in $${dir}/${EMACS_ICON}[.-]*; do \
 711             [ -r $${icon} ] || continue ; \
 712             ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
 713             dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
 714             ( cd $${thisdir}; \
 715               ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${dir}/$${dest} ) \
 716             || exit 1; \
 717           done ; \
 718         done
 719
 720 ### Build Emacs and install it, stripping binaries while installing them.
 721 install-strip:
 722         $(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
 723
 724 ### Delete all the installed files that the `install' target would
 725 ### create (but not the noninstalled files such as `make all' would create).
 726 ###
 727 ### Don't delete the lisp and etc directories if they're in the source tree.
 728 uninstall: uninstall-$(NTDIR) uninstall-doc
 729         cd lib-src &&                                   \
 730          $(MAKE) $(MFLAGS) uninstall                    \
 731             prefix=${prefix} exec_prefix=${exec_prefix} \
 732             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
 733
 734         -unset CDPATH; \
 735         for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do        \
 736           if [ -d $${dir} ]; then                       \
 737             case `cd $${dir} ; /bin/pwd` in             \
 738               `cd ${srcdir} ; /bin/pwd`* ) ;;           \
 739               * ) rm -rf $${dir} ;;                     \
 740             esac ;                                      \
 741             case $${dir} in                             \
 742               $(DESTDIR)${datadir}/emacs/${version}/* )         \
 743                 rm -rf $(DESTDIR)${datadir}/emacs/${version}    \
 744               ;;                                        \
 745             esac ;                                      \
 746           fi ;                                          \
 747         done
 748         -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
 749         thisdir=`/bin/pwd`; \
 750         (info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
 751          if cd $(DESTDIR)${infodir}; then \
 752            for elt in ${INFO_NONMISC} $${info_misc}; do \
 753              (cd $${thisdir}; \
 754               $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 755              if [ -n "${GZIP_PROG}" ]; then \
 756                 ext=.gz; else ext=; fi; \
 757              rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
 758            done; \
 759          fi)
 760         (if [ -n "${GZIP_PROG}" ]; then \
 761             ext=.gz; else ext=; fi; \
 762          if cd ${mansrcdir}; then \
 763            for page in *.1; do \
 764              rm -f $(DESTDIR)${man1dir}/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
 765          fi)
 766         (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS) || true)
 767         (if cd $(DESTDIR)${icondir}; then \
 768            rm -f hicolor/*x*/apps/${EMACS_NAME}.png \
 769              hicolor/scalable/apps/${EMACS_NAME}.svg \
 770              hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \
 771         fi)
 772         -rm -f $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop
 773         for file in snake-scores tetris-scores; do \
 774           file=$(DESTDIR)${gamedir}/$${file}; \
 775           [ -s $${file} ] || rm -f $$file; \
 776         done
 777
 778 ### Windows-specific uninstall target for removing programs produced
 779 ### in nt/, and its Posix do-nothing shadow.
 780 uninstall-:
 781 uninstall-nt:
 782         cd $(NTDIR) &&                                  \
 783          $(MAKE) $(MFLAGS) uninstall                    \
 784             prefix=${prefix} exec_prefix=${exec_prefix} \
 785             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
 786
 787 FRC:
 788
 789 # ==================== Cleaning up and miscellanea ====================
 790
 791 .PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
 792
 793 ### `mostlyclean'
 794 ###      Like `clean', but may refrain from deleting a few files that people
 795 ###      normally don't want to recompile.  For example, the `mostlyclean'
 796 ###      target for GCC does not delete `libgcc.a', because recompiling it
 797 ###      is rarely necessary and takes a lot of time.
 798 mostlyclean: FRC
 799         cd src      && $(MAKE) $(MFLAGS) mostlyclean
 800         cd oldXMenu && $(MAKE) $(MFLAGS) mostlyclean
 801         cd lwlib    && $(MAKE) $(MFLAGS) mostlyclean
 802         cd lib      && $(MAKE) $(MFLAGS) mostlyclean
 803         cd lib-src  && $(MAKE) $(MFLAGS) mostlyclean
 804         cd nt       && $(MAKE) $(MFLAGS) mostlyclean
 805         -cd doc/emacs     && $(MAKE) $(MFLAGS) mostlyclean
 806         -cd doc/misc      && $(MAKE) $(MFLAGS) mostlyclean
 807         -cd doc/lispref   && $(MAKE) $(MFLAGS) mostlyclean
 808         -cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean
 809         cd leim     && $(MAKE) $(MFLAGS) mostlyclean
 810
 811 ### `clean'
 812 ###      Delete all files from the current directory that are normally
 813 ###      created by building the program.  Don't delete the files that
 814 ###      record the configuration.  Also preserve files that could be made
 815 ###      by building, but normally aren't because the distribution comes
 816 ###      with them.
 817 ###
 818 ###      Delete `.dvi' files here if they are not part of the distribution.
 819 clean: FRC
 820         -rm -f etc/emacs.tmpdesktop
 821         cd src      && $(MAKE) $(MFLAGS) clean
 822         cd oldXMenu && $(MAKE) $(MFLAGS) clean
 823         cd lwlib    && $(MAKE) $(MFLAGS) clean
 824         cd lib      && $(MAKE) $(MFLAGS) clean
 825         cd lib-src  && $(MAKE) $(MFLAGS) clean
 826         cd nt       && $(MAKE) $(MFLAGS) clean
 827         -cd doc/emacs     && $(MAKE) $(MFLAGS) clean
 828         -cd doc/misc      && $(MAKE) $(MFLAGS) clean
 829         -cd doc/lispref   && $(MAKE) $(MFLAGS) clean
 830         -cd doc/lispintro && $(MAKE) $(MFLAGS) clean
 831         cd leim     && $(MAKE) $(MFLAGS) clean
 832         cd nextstep && $(MAKE) $(MFLAGS) clean
 833
 834 ### `bootclean'
 835 ###      Delete all files that need to be remade for a clean bootstrap.
 836 top_bootclean=\
 837         rm -f config.cache config.log
 838 ### `distclean'
 839 ###      Delete all files from the current directory that are created by
 840 ###      configuring or building the program.  If you have unpacked the
 841 ###      source and built the program without creating any other files,
 842 ###      `make distclean' should leave only the files that were in the
 843 ###      distribution.
 844 top_distclean=\
 845         ${top_bootclean}; \
 846         rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
 847 distclean: FRC
 848         cd src      && $(MAKE) $(MFLAGS) distclean
 849         cd oldXMenu && $(MAKE) $(MFLAGS) distclean
 850         cd lwlib    && $(MAKE) $(MFLAGS) distclean
 851         cd lib      && $(MAKE) $(MFLAGS) distclean
 852         cd lib-src  && $(MAKE) $(MFLAGS) distclean
 853         cd nt       && $(MAKE) $(MFLAGS) distclean
 854         cd doc/emacs     && $(MAKE) $(MFLAGS) distclean
 855         cd doc/misc      && $(MAKE) $(MFLAGS) distclean
 856         cd doc/lispref   && $(MAKE) $(MFLAGS) distclean
 857         cd doc/lispintro && $(MAKE) $(MFLAGS) distclean
 858         cd leim     && $(MAKE) $(MFLAGS) distclean
 859         cd lisp     && $(MAKE) $(MFLAGS) distclean
 860         cd nextstep && $(MAKE) $(MFLAGS) distclean
 861         [ ! -d test/automated ] || { \
 862           cd test/automated && $(MAKE) $(MFLAGS) distclean; \
 863         }
 864         ${top_distclean}
 865
 866 ### `bootstrap-clean'
 867 ###      Delete everything that can be reconstructed by `make' and that
 868 ###      needs to be deleted in order to force a bootstrap from a clean state.
 869 bootstrap-clean: FRC
 870         cd src      && $(MAKE) $(MFLAGS) bootstrap-clean
 871         cd oldXMenu && $(MAKE) $(MFLAGS) maintainer-clean
 872         cd lwlib    && $(MAKE) $(MFLAGS) maintainer-clean
 873         cd lib      && $(MAKE) $(MFLAGS) maintainer-clean
 874         cd lib-src  && $(MAKE) $(MFLAGS) maintainer-clean
 875         cd nt       && $(MAKE) $(MFLAGS) maintainer-clean
 876         -cd doc/emacs     && $(MAKE) $(MFLAGS) maintainer-clean
 877         -cd doc/misc      && $(MAKE) $(MFLAGS) maintainer-clean
 878         -cd doc/lispref   && $(MAKE) $(MFLAGS) maintainer-clean
 879         -cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean
 880         cd leim     && $(MAKE) $(MFLAGS) maintainer-clean
 881         cd lisp     && $(MAKE) $(MFLAGS) bootstrap-clean
 882         cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean
 883         [ ! -d test/automated ] || { \
 884           cd test/automated && $(MAKE) $(MFLAGS) bootstrap-clean; \
 885         }
 886         [ ! -f config.log ] || mv -f config.log config.log~
 887         ${top_bootclean}
 888
 889 ### `maintainer-clean'
 890 ###      Delete everything from the current directory that can be
 891 ###      reconstructed with this Makefile.  This typically includes
 892 ###      everything deleted by distclean, plus more: C source files
 893 ###      produced by Bison, tags tables, info files, and so on.
 894 ###
 895 ###      One exception, however: `make maintainer-clean' should not delete
 896 ###      `configure' even if `configure' can be remade using a rule in the
 897 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 898 ###      anything that needs to exist in order to run `configure' and then
 899 ###      begin to build the program.
 900 top_maintainer_clean=\
 901         ${top_distclean}; \
 902         rm -fr autom4te.cache
 903 maintainer-clean: bootstrap-clean FRC
 904         cd src  && $(MAKE) $(MFLAGS) maintainer-clean
 905         cd lisp && $(MAKE) $(MFLAGS) maintainer-clean
 906         [ ! -d test/automated ] || { \
 907           cd test/automated && $(MAKE) $(MFLAGS) maintainer-clean; \
 908         }
 909         ${top_maintainer_clean}
 910
 911 ### This doesn't actually appear in the coding standards, but Karl
 912 ### says GCC supports it, and that's where the configuration part of
 913 ### the coding standards seem to come from.  It's like distclean, but
 914 ### it deletes backup and autosave files too.
 915 extraclean:
 916         for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 917         ${top_maintainer_clean}
 918         -rm -f config-tmp-*
 919         -rm -f *~ \#*
 920
 921 # The src subdir knows how to do the right thing
 922 # even when the build directory and source dir are different.
 923 .PHONY: TAGS tags
 924 TAGS tags: lib lib-src src
 925         cd src; $(MAKE) $(MFLAGS) tags
 926
 927 check:
 928         @if test ! -d test/automated; then \
 929           echo "You do not seem to have the test/ directory."; \
 930           echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
 931         else \
 932           cd test/automated && $(MAKE) $(MFLAGS) check; \
 933         fi
 934
 935 dist:
 936         cd ${srcdir}; ./make-dist
 937
 938 DVIS  = lispref-dvi  lispintro-dvi  emacs-dvi  misc-dvi
 939 HTMLS = lispref-html lispintro-html emacs-html misc-html
 940 INFOS = lispref-info lispintro-info emacs-info misc-info
 941 PDFS  = lispref-pdf  lispintro-pdf  emacs-pdf  misc-pdf
 942 PSS   = lispref-ps   lispintro-ps   emacs-ps   misc-ps
 943
 944 DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
 945 $(DOCS):
 946         t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2
 947
 948 .PHONY: $(DOCS) docs pdf ps
 949 .PHONY: info dvi dist check html info-real force-info check-info-dir
 950
 951 ## TODO add etc/refcards.
 952 docs: $(DOCS)
 953 dvi: $(DVIS)
 954 html: $(HTMLS)
 955 info-real: $(INFOS)
 956 pdf: $(PDFS)
 957 ps: $(PSS)
 958
 959
 960 INSTALL_DVI = install-emacs-dvi install-lispref-dvi \
 961         install-lispintro-dvi install-misc-dvi
 962 INSTALL_HTML = install-emacs-html install-lispref-html \
 963         install-lispintro-html install-misc-html
 964 INSTALL_PDF = install-emacs-pdf install-lispref-pdf \
 965         install-lispintro-pdf install-misc-pdf
 966 INSTALL_PS = install-emacs-ps install-lispref-ps \
 967         install-lispintro-ps install-misc-ps
 968 INSTALL_DOC = $(INSTALL_DVI) $(INSTALL_HTML) $(INSTALL_PDF) $(INSTALL_PS)
 969
 970 ## Install non .info forms of the documentation.
 971 ## TODO add etc/refcards.
 972 $(INSTALL_DOC):
 973         t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
 974
 975 .PHONY: $(INSTALL_DOC) install-doc
 976 .PHONY: install-dvi install-html install-pdf install-ps
 977
 978 install-doc: $(INSTALL_DOC)
 979 install-dvi: $(INSTALL_DVI)
 980 install-html: $(INSTALL_HTML)
 981 install-pdf: $(INSTALL_PDF)
 982 install-ps: $(INSTALL_PS)
 983
 984
 985 UNINSTALL_DVI = uninstall-emacs-dvi uninstall-lispref-dvi \
 986         uninstall-lispintro-dvi uninstall-misc-dvi
 987 UNINSTALL_HTML = uninstall-emacs-html uninstall-lispref-html \
 988         uninstall-lispintro-html uninstall-misc-html
 989 UNINSTALL_PDF = uninstall-emacs-pdf uninstall-lispref-pdf \
 990         uninstall-lispintro-pdf uninstall-misc-pdf
 991 UNINSTALL_PS = uninstall-emacs-ps uninstall-lispref-ps \
 992         uninstall-lispintro-ps uninstall-misc-ps
 993 UNINSTALL_DOC = $(UNINSTALL_DVI) $(UNINSTALL_HTML) $(UNINSTALL_PDF) $(UNINSTALL_PS)
 994
 995 $(UNINSTALL_DOC):
 996         t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
 997
 998 .PHONY: $(UNINSTALL_DOC) uninstall-doc
 999 .PHONY: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps
1000
1001 uninstall-doc: $(UNINSTALL_DOC)
1002 uninstall-dvi: $(UNINSTALL_DVI)
1003 uninstall-html: $(UNINSTALL_HTML)
1004 uninstall-pdf: $(UNINSTALL_PDF)
1005 uninstall-ps: $(UNINSTALL_PS)
1006
1007
1008 force-info:
1009 # Note that man/Makefile knows how to put the info files in $(srcdir),
1010 # so we can do ok running make in the build dir.
1011 # This used to have a clause that exited with an error if MAKEINFO = no.
1012 # But it is inappropriate to do so without checking if makeinfo is
1013 # actually needed - it is not if the info files are up-to-date.  (Bug#3982)
1014 # Only the doc/*/Makefiles can decide that, so we let those rules run
1015 # and give a standard error if makeinfo is needed but missing.
1016 # While it would be nice to give a more detailed error message, that
1017 # would require changing every rule in doc/ that builds an info file,
1018 # and it's not worth it.  This case is only relevant if you download a
1019 # release, then change the .texi files.
1020 info: force-info
1021         @if test "$(HAVE_MAKEINFO)" = "no"; then \
1022           echo "Configured --without-makeinfo, not building manuals" ; \
1023         else \
1024           $(MAKE) $(MFLAGS) info-real ; \
1025         fi
1026
1027 # The info/dir file must be updated by hand when new manuals are added.
1028 # Cannot add an info/dir entry for efaq-w32 since it is not installed
1029 # on all platforms.
1030 check-info-dir: info
1031         cd info ; \
1032         missing= ; \
1033         for file in *; do \
1034           test -f "$${file}" || continue ; \
1035           case $${file} in \
1036             *-[0-9]*|COPYING|dir|efaq-w32*) continue ;; \
1037           esac ; \
1038           file=`echo $${file} | sed 's/\.info//'` ; \
1039           grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
1040         done ; \
1041         if test -n "$${missing}"; then \
1042           echo "Missing info/dir entries: $${missing}" ; \
1043           exit 1 ; \
1044         fi ; \
1045         echo "info/dir is OK"
1046
1047 #### Bootstrapping.
1048
1049 ### This first cleans the lisp subdirectory, removing all compiled
1050 ### Lisp files.  Then re-run make to build all the files anew.
1051
1052 .PHONY: bootstrap
1053
1054 # Bootstrapping does the following:
1055 #  * Remove files to start from a bootstrap-clean slate.
1056 #  * Run autogen.sh, falling back on copy_autogen if autogen.sh fails.
1057 #  * Rebuild Makefile, to update the build procedure itself.
1058 #  * Do the actual build.
1059 bootstrap: bootstrap-clean FRC
1060         cd $(srcdir) && { ./autogen.sh || autogen/copy_autogen; }
1061         $(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
1062         $(MAKE) $(MFLAGS) info all
1063
1064 .PHONY: check-declare
1065
1066 check-declare:
1067         @if [ ! -f $(srcdir)/src/emacs ]; then \
1068           echo "You must build Emacs to use this command"; \
1069           exit 1; \
1070         fi
1071         cd leim && $(MAKE) $(MFLAGS) $@
1072         cd lisp && $(MAKE) $(MFLAGS) $@