Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
   6 #   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
   7 #   Free Software Foundation, Inc.
   8
   9 # This file is part of GNU Emacs.
  10
  11 # GNU Emacs is free software: you can redistribute it and/or modify
  12 # it under the terms of the GNU General Public License as published by
  13 # the Free Software Foundation, either version 3 of the License, or
  14 # (at your option) any later version.
  15
  16 # GNU Emacs is distributed in the hope that it will be useful,
  17 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  18 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19 # GNU General Public License for more details.
  20
  21 # You should have received a copy of the GNU General Public License
  22 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
  23
  24 ### Commentary:
  25
  26 # make all      to compile and build Emacs.
  27 # make install  to install it.
  28 # make TAGS     to update tags tables.
  29 #
  30 # make clean  or  make mostlyclean
  31 #      Delete all files from the current directory that are normally
  32 #      created by building the program.  Don't delete the files that
  33 #      record the configuration.  Also preserve files that could be made
  34 #      by building, but normally aren't because the distribution comes
  35 #      with them.
  36 #
  37 #      Delete `.dvi' files here if they are not part of the distribution.
  38 #
  39 # make distclean
  40 #      Delete all files from the current directory that are created by
  41 #      configuring or building the program.  If you have unpacked the
  42 #      source and built the program without creating any other files,
  43 #      `make distclean' should leave only the files that were in the
  44 #      distribution.
  45 #
  46 # make maintainer-clean
  47 #      Delete everything from the current directory that can be
  48 #      reconstructed with this Makefile.  This typically includes
  49 #      everything deleted by distclean, plus more: .elc files,
  50 #      C source files produced by Bison, tags tables, info files,
  51 #      and so on.
  52 #
  53 # make extraclean
  54 #      Still more severe - delete backup and autosave files, too.
  55 #
  56 # make bootstrap
  57 #      Removes all the compiled files to force a new bootstrap from a
  58 #      clean slate, and then build in the normal way.
  59
  60 SHELL = /bin/sh
  61
  62 # This may not work with certain non-GNU make's.  It only matters when
  63 # inheriting a CDPATH not starting with the current directory.
  64 CDPATH=
  65
  66 # If Make doesn't predefine MAKE, set it here.
  67 @SET_MAKE@
  68
  69 # ==================== Things `configure' Might Edit ====================
  70
  71 CC=@CC@
  72 CPP=@CPP@
  73 C_SWITCH_SYSTEM=@c_switch_system@
  74 ALLOCA=@ALLOCA@
  75 LN_S=@LN_S@
  76 CFLAGS=@CFLAGS@
  77 LDFLAGS=@LDFLAGS@
  78 CPPFLAGS=@CPPFLAGS@
  79 C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
  80 LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
  81 EXEEXT=@EXEEXT@
  82 MAKEINFO=@MAKEINFO@
  83
  84 ### These help us choose version- and architecture-specific directories
  85 ### to install files in.
  86
  87 ### This should be the number of the Emacs version we're building,
  88 ### like `18.59' or `19.0'.
  89 version=@version@
  90
  91 ### This should be the name of the configuration we're building Emacs
  92 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  93 configuration=@configuration@
  94
  95 # ==================== Where To Install Things ====================
  96
  97 # The default location for installation.  Everything is placed in
  98 # subdirectories of this directory.  The default values for many of
  99 # the variables below are expressed in terms of this one, so you may
 100 # not need to change them.  This defaults to /usr/local.
 101 prefix=@prefix@
 102
 103 # Like `prefix', but used for architecture-specific files.
 104 exec_prefix=@exec_prefix@
 105
 106 # Where to install Emacs and other binaries that people will want to
 107 # run directly (like etags).
 108 bindir=@bindir@
 109
 110 # The root of the directory tree for read-only architecture-independent
 111 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 112 datarootdir=@datarootdir@
 113
 114 # Where to install architecture-independent data files.  ${lispdir}
 115 # and ${etcdir} are subdirectories of this.
 116 datadir=@datadir@
 117
 118 # Where to install and expect the files that Emacs modifies as it
 119 # runs.  These files are all architecture-independent.
 120 # Right now, this is not used.
 121 sharedstatedir=@sharedstatedir@
 122
 123 # Where to install and expect executable files to be run by Emacs
 124 # rather than directly by users, and other architecture-dependent
 125 # data.  ${archlibdir} is a subdirectory of this.
 126 libexecdir=@libexecdir@
 127
 128 # Where to install Emacs's man pages.
 129 # This used to allow choice of the numeric extension, but this made
 130 # little sense since the files were always installed in man1/
 131 # (and they contain cross-references that expect them to be there).
 132 mandir=@mandir@
 133 man1dir=$(mandir)/man1
 134 MAN_PAGES=b2m.1 ctags.1 ebrowse.1 emacs.1 emacsclient.1 etags.1 \
 135           grep-changelog.1 rcs-checkin.1
 136
 137 # Where to install and expect the info files describing Emacs.  In the
 138 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
 139 # since there are now many packages documented with the texinfo
 140 # system, it is inappropriate to imply that it is part of Emacs.
 141 infodir=@infodir@
 142 INFO_FILES=ada-mode auth autotype calc ccmode cl dbus dired-x ebrowse   \
 143            ede ediff eieio efaq eintr elisp emacs emacs-mime epa erc    \
 144            eshell eudc flymake forms gnus idlwave info mairix-el        \
 145            message mh-e newsticker nxml-mode org pcl-cvs pgg rcirc      \
 146            reftex remember sasl sc ses sieve smtpmail speedbar tramp    \
 147            url vip viper widget woman
 148
 149 # Directory for local state files for all programs.
 150 localstatedir=@localstatedir@
 151
 152 # Where to look for bitmap files.
 153 bitmapdir=@bitmapdir@
 154
 155 # Where to find the source code.  The source code for Emacs's C kernel is
 156 # expected to be in ${srcdir}/src, and the source code for Emacs's
 157 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 158 # set by the configure script's `--srcdir' option.
 159
 160 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 161 srcdir=@srcdir@
 162
 163 # Where the manpage source files are kept.
 164 mansrcdir=$(srcdir)/doc/man
 165
 166 # Tell make where to find source files; this is needed for the makefiles.
 167 VPATH=@srcdir@
 168
 169 # Where to find the application default.
 170 x_default_search_path=@x_default_search_path@
 171
 172 # Location to install Emacs.app under NeXT/Open/GNUstep / Cocoa
 173 ns_appdir=@ns_appdir@
 174 ns_appbindir=@ns_appbindir@
 175 ns_appresdir=@ns_appresdir@
 176
 177 # Where the etc/emacs.desktop file is to be installed.
 178 desktopdir=$(datarootdir)/applications
 179
 180 # Where the etc/images/icons/hicolor directory is to be installed.
 181 icondir=$(datarootdir)/icons
 182
 183 # The source directory for the icon files.
 184 iconsrcdir=$(srcdir)/etc/images/icons
 185
 186 # ==================== Emacs-specific directories ====================
 187
 188 # These variables hold the values Emacs will actually use.  They are
 189 # based on the values of the standard Make variables above.
 190
 191 # Where to install the lisp files distributed with
 192 # Emacs.  This includes the Emacs version, so that the
 193 # lisp files for different versions of Emacs will install
 194 # themselves in separate directories.
 195 lispdir=@lispdir@
 196
 197 # Directories Emacs should search for lisp files specific
 198 # to this site (i.e. customizations), before consulting
 199 # ${lispdir}.  This should be a colon-separated list of
 200 # directories.
 201 locallisppath=@locallisppath@
 202
 203 # Where Emacs will search to find its lisp files.  Before
 204 # changing this, check to see if your purpose wouldn't
 205 # better be served by changing locallisppath.  This
 206 # should be a colon-separated list of directories.
 207 lisppath=@lisppath@
 208
 209 # Where Emacs will search for its lisp files while
 210 # building.  This is only used during the process of
 211 # compiling Emacs, to help Emacs find its lisp files
 212 # before they've been installed in their final location.
 213 # It's usually identical to lisppath, except that
 214 # it does not include locallisppath, and the
 215 # entry for the directory containing the installed lisp
 216 # files has been replaced with ../lisp.  This should be a
 217 # colon-separated list of directories.
 218 buildlisppath=${srcdir}/lisp
 219
 220 # Where to install the other architecture-independent
 221 # data files distributed with Emacs (like the tutorial,
 222 # the cookie recipes and the Zippy database). This path
 223 # usually contains the Emacs version number, so the data
 224 # files for multiple versions of Emacs may be installed
 225 # at once.
 226 etcdir=@etcdir@
 227
 228 # Where to put executables to be run by Emacs rather than
 229 # the user.  This path usually includes the Emacs version
 230 # and configuration name, so that multiple configurations
 231 # for multiple versions of Emacs may be installed at
 232 # once.
 233 archlibdir=@archlibdir@
 234
 235 # Where to put the docstring file.
 236 docdir=@docdir@
 237
 238 # Where to install Emacs game score files.
 239 gamedir=@gamedir@
 240
 241 # ==================== Utility Programs for the Build ====================
 242
 243 # Allow the user to specify the install program.
 244 INSTALL = @INSTALL@
 245 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 246 INSTALL_DATA = @INSTALL_DATA@
 247 INSTALL_INFO = @INSTALL_INFO@
 248 # By default, we uphold the dignity of our programs.
 249 INSTALL_STRIP =
 250
 251 # We use gzip to compress installed .el files.
 252 GZIP_PROG = @GZIP_PROG@
 253
 254 # ============================= Targets ==============================
 255
 256 # Program name transformation.
 257 TRANSFORM = @program_transform_name@
 258
 259 # What emacs should be called when installed.
 260 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
 261 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
 262
 263 # Subdirectories to make recursively.  `lisp' is not included
 264 # because the compiled lisp files are part of the distribution.
 265 # leim is not included because it needs special handling.
 266 #
 267 # Actually, we now include `lisp' as well, since the compiled files
 268 # are not included any more in case of bootstrap or in case Emacs was
 269 # checked out from a VCS.
 270 SUBDIR = lib-src src lisp
 271
 272 # The subdir makefiles created by config.status.
 273 SUBDIR_MAKEFILES = lib-src/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispref/Makefile doc/lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile lisp/Makefile
 274
 275 # Subdirectories to install, and where they'll go.
 276 # lib-src's makefile knows how to install it, so we don't do that here.
 277 # leim's makefile also knows how to install it, so we don't do that here.
 278 # When installing the info files, we need to do special things to
 279 # avoid nuking an existing dir file, so we don't do that here;
 280 # instead, we have written out explicit code in the `install' targets.
 281 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 282 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
 283
 284 all: ${SUBDIR} leim
 285
 286 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
 287
 288 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 289 epaths-force: FRC
 290         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 291           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 292           x_default_search_path=`echo ${x_default_search_path}`; \
 293           gamedir=`echo ${gamedir}`; \
 294           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 295           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";'      \
 296           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 297           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 298           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 299           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 300           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 301           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 302           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 303           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
 304           -e 's;/[*] *arch-tag:.*;/*;') &&              \
 305         ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
 306
 307 # For parallel make, src should be built before leim.
 308 # "export PARALLEL=0" is for SGI's Make, to prevent it from
 309 # running more than 1 process in the leim directory, especially for
 310 # the $TIT files there.
 311 leim:   src Makefile FRC
 312         (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
 313           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 314           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
 315
 316 src:    lib-src FRC
 317
 318 .RECURSIVE: ${SUBDIR} leim
 319
 320 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
 321 lisp: src
 322
 323 # These targets should be "${SUBDIR} without `src'".
 324 lib-src lisp: Makefile FRC
 325         cd $@; $(MAKE) all $(MFLAGS)                           \
 326           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 327           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 328
 329 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
 330 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
 331 # constructed yet) or the empty string (otherwise).
 332 # src/Makefile.in uses it to implement conditional dependencies, so that
 333 # files that need bootstrap-emacs to be built do not additionally need
 334 # to be kept fresher than bootstrap-emacs.  Otherwise changing a single
 335 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
 336 # all preloaded elisp files, and only then dump the actual src/emacs, which
 337 # is not wrong, but is overkill in 99.99% of the cases.
 338 src: Makefile FRC
 339         boot=bootstrap-emacs$(EXEEXT);                         \
 340         if [ ! -x "src/$$boot" ]; then                                     \
 341             cd $@; $(MAKE) all $(MFLAGS)                                   \
 342               CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}'         \
 343               LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \
 344         fi;
 345         cd $@; $(MAKE) all $(MFLAGS)                           \
 346           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 347           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS=""
 348
 349 blessmail: Makefile src FRC
 350         cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
 351           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 352
 353 # We used to have one rule per */Makefile.in, but that leads to race
 354 # conditions with parallel makes, so let's assume that the time stamp on
 355 # ./Makefile is representative of the time stamp on all the other Makefiles.
 356 Makefile: config.status $(srcdir)/src/config.in \
 357           $(srcdir)/Makefile.in \
 358           $(srcdir)/src/Makefile.in \
 359           $(srcdir)/lib-src/Makefile.in \
 360           $(srcdir)/doc/emacs/Makefile.in \
 361           $(srcdir)/doc/misc/Makefile.in \
 362           $(srcdir)/doc/lispref/Makefile.in \
 363           $(srcdir)/doc/lispintro/Makefile.in \
 364           $(srcdir)/oldXMenu/Makefile.in \
 365           $(srcdir)/lwlib/Makefile.in \
 366           $(srcdir)/leim/Makefile.in \
 367           $(srcdir)/lisp/Makefile.in
 368         ./config.status
 369
 370 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 371         ./config.status --recheck
 372
 373 AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/m4/getopt.m4
 374
 375 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 376         cd ${srcdir} && autoconf
 377
 378 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 379         @true
 380 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 381         cd ${srcdir} && autoheader
 382         rm -f $(srcdir)/src/stamp-h.in
 383         echo timestamp > $(srcdir)/src/stamp-h.in
 384
 385 # ==================== Installation ====================
 386
 387 ## If we let lib-src do its own installation, that means we
 388 ## don't have to duplicate the list of utilities to install in
 389 ## this Makefile as well.
 390
 391 ## On AIX, use tar xBf.
 392 ## On Xenix, use tar xpf.
 393
 394 .PHONY: install mkdir
 395
 396 ## We delete each directory in ${COPYDESTS} before we copy into it;
 397 ## that way, we can reinstall over directories that have been put in
 398 ## place with their files read-only (perhaps because they are checked
 399 ## into RCS).  In order to make this safe, we make sure that the
 400 ## source exists and is distinct from the destination.
 401 ### We do install-arch-indep first because
 402 ### the executable needs the Lisp files and DOC file to work properly.
 403 install: all install-arch-indep install-arch-dep install-leim blessmail
 404         @true
 405
 406 MV_DIRS = for i in $$dir; do rm -fr `basename "$$i"` ; mv "$$i" . ; done
 407
 408 ### Install the executables that were compiled specifically for this machine.
 409 ### It would be nice to do something for a parallel make
 410 ### to ensure that install-arch-indep finishes before this starts.
 411 install-arch-dep: mkdir
 412         (cd lib-src; \
 413           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 414             exec_prefix=${exec_prefix} bindir=${bindir} \
 415             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 416             INSTALL_STRIP=${INSTALL_STRIP})
 417         ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
 418         -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
 419         rm -f $(DESTDIR)${bindir}/$(EMACS)
 420         -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
 421         -unset CDPATH; \
 422         for f in `cd lib-src && echo fns-*.el`; do \
 423           if test -r lib-src/$$f ; then \
 424             ${INSTALL_DATA} lib-src/$$f $(DESTDIR)${archlibdir}/$$f; \
 425           else true; fi ; \
 426         done
 427         if test "${ns_appdir}" != ""; then \
 428           ( cd ${ns_appresdir} ; \
 429             if test -d share/emacs ; then dir=share/emacs/*/*; $(MV_DIRS); fi;\
 430             if test -d share/info ; then dir=share/info; $(MV_DIRS) ; fi ; \
 431             rm -fr share ) ; \
 432           ( cd ${ns_appbindir}/libexec ; dir=emacs/*/*/* ; $(MV_DIRS); \
 433             rm -fr emacs ) ; \
 434           ( cd ${ns_appbindir}/bin ; rm -f emacs emacs-23* ; \
 435             ln -sf ../libexec/* .) ; \
 436         else true ; fi
 437
 438 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 439 ## Needs to be the user running install, so configure can't set it.
 440 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 441           `id -un 2> /dev/null`; do \
 442           [ -n "$${installuser}" ] && break ; \
 443         done
 444
 445 ### Install the files that are machine-independent.
 446 ### Most of them come straight from the distribution;
 447 ### the exception is the DOC-* files, which are copied
 448 ### from the build directory.
 449
 450 ## Note that we copy DOC* and then delete DOC
 451 ## as a workaround for a bug in tar on Ultrix 4.2.
 452
 453 ## We install only the relevant DOC file if possible
 454 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
 455
 456 ## If people complain about the h flag in tar command, take that out.
 457 ## That flag is also used in leim/Makefile.in
 458
 459 ## Note that the Makefiles in the etc directory are potentially useful
 460 ## in an installed Emacs, so should not be excluded.
 461
 462 install-arch-indep: mkdir info install-etc
 463         -set ${COPYDESTS} ; \
 464         unset CDPATH; \
 465         for dir in ${COPYDIR} ; do \
 466           if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
 467             rm -rf $$1 ; \
 468           fi ; \
 469           shift ; \
 470         done
 471         -set ${COPYDESTS} ; \
 472         mkdir ${COPYDESTS} ; \
 473         chmod ugo+rx ${COPYDESTS} ; \
 474         unset CDPATH; \
 475         $(set_installuser); \
 476         for dir in ${COPYDIR} ; do \
 477           dest=$$1 ; shift ; \
 478           [ -d $${dir} ] \
 479           && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
 480           && (echo "Copying $${dir} to $${dest}..." ; \
 481               (cd $${dir}; tar -chf - . ) \
 482                 | (cd $${dest}; umask 022; \
 483                    tar -xvf - && cat > /dev/null) || exit 1; \
 484               find $${dest} -exec chown $${installuser} {} ';' ;\
 485               for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \
 486                 chmod a+rx $${subdir} ; \
 487                 rm -rf $${subdir}/RCS ; \
 488                 rm -rf $${subdir}/CVS ; \
 489                 rm -f  $${subdir}/.cvsignore ; \
 490                 rm -f  $${subdir}/.gitignore ; \
 491                 rm -f  $${subdir}/.arch-inventory ; \
 492                 rm -f  $${subdir}/.DS_Store ; \
 493                 rm -f  $${subdir}/\#* ; \
 494                 rm -f  $${subdir}/.\#* ; \
 495                 rm -f  $${subdir}/*~ ; \
 496                 rm -f  $${subdir}/*.orig ; \
 497                 [ "$${dir}" != "${srcdir}/etc" ] && \
 498                         rm -f  $${subdir}/[mM]akefile* ; \
 499                 rm -f  $${subdir}/ChangeLog* ; \
 500                 rm -f  $${subdir}/dired.todo ; \
 501               done) ; \
 502         done
 503         -rm -f $(DESTDIR)${lispdir}/subdirs.el
 504         $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
 505         if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
 506         then true; \
 507         else \
 508           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 509            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 510             > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
 511         fi
 512         chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
 513         -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
 514         then true; \
 515         else \
 516           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 517            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 518             > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
 519         fi
 520         -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
 521         -unset CDPATH; \
 522         if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
 523         then \
 524            fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
 525            if [ -f "./etc/DOC-$${fullversion}" ]; \
 526            then \
 527              docfile="DOC-$${fullversion}"; \
 528            else \
 529              docfile="DOC"; \
 530            fi; \
 531            echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
 532            (cd ./etc; tar -chf - $${docfile}) \
 533              |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 534            (cd $(DESTDIR)$(docdir); \
 535             $(set_installuser); \
 536             chown $${installuser} DOC*; chmod a+r DOC*; \
 537             if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
 538         else true; fi
 539         -unset CDPATH; \
 540         if [ -r ./lisp ] \
 541            && [ -r ./lisp/simple.el ] \
 542            && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \
 543            && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
 544         then \
 545            echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \
 546            (cd lisp; tar -chf - *.el *.elc) \
 547              |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 548            (cd $(DESTDIR)${lispdir}; \
 549             $(set_installuser); \
 550             find . -exec chown $${installuser} {} ';') ; \
 551         else true; fi
 552         -unset CDPATH; \
 553         if [ -n "${GZIP_PROG}" ]; \
 554         then \
 555            echo "Compressing *.el ..." ; \
 556            (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
 557                 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
 558             done) \
 559         else true; fi
 560         -unset CDPATH; \
 561         thisdir=`/bin/pwd`; \
 562         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 563         then \
 564           (cd $(DESTDIR)${infodir};  \
 565            if [ -f dir ]; then true; \
 566            else \
 567              (cd $${thisdir}; \
 568               ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
 569               chmod a+r $(DESTDIR)${infodir}/dir); \
 570            fi; \
 571            cd ${srcdir}/info ; \
 572            for elt in $(INFO_FILES); do \
 573               test "$(MAKEINFO)" = "off" && ! test -e $$elt && continue; \
 574               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 575                 ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \
 576                 chmod a+r $(DESTDIR)${infodir}/$$f; \
 577               done; \
 578            done); \
 579         else true; fi
 580         -unset CDPATH; \
 581         thisdir=`/bin/pwd`; \
 582         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 583         then \
 584           for elt in $(INFO_FILES); do \
 585             test "$(MAKEINFO)" = "off" && ! test -e $$elt && continue; \
 586             (cd $${thisdir}; \
 587              ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 588           done; \
 589         else true; fi
 590         -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
 591         thisdir=`/bin/pwd`; \
 592         cd ${mansrcdir}; \
 593         for page in ${MAN_PAGES}; do \
 594           (cd $${thisdir}; \
 595            ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}; \
 596            chmod a+r $(DESTDIR)${man1dir}/$${page}); \
 597         done
 598
 599 ## Install those items from etc/ that need to end up elsewhere.
 600 install-etc: mkdir
 601         ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
 602           $(DESTDIR)${desktopdir}/emacs.desktop
 603         for icon in $(iconsrcdir)/*/*/apps/*.* \
 604           $(iconsrcdir)/*/*/mimetypes/*.*; do \
 605           if [ -r $${icon} ]; then \
 606             iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
 607             ${INSTALL_DATA} $${icon} $${iicon} ; \
 608           fi ; \
 609         done
 610
 611 ### Install LEIM files.  Although they are machine-independent, we
 612 ### have separate target here instead of including it in
 613 ### `install-arch-indep'.  People who extracted LEIM files after they
 614 ### insalled Emacs itself can install only LEIM files by this target.
 615 install-leim: leim/Makefile mkdir
 616         cd leim; $(MAKE) install
 617
 618 ### Build Emacs and install it, stripping binaries while installing them.
 619 install-strip:
 620         $(MAKE) INSTALL_STRIP=-s install
 621
 622 ### Build all the directories we're going to install Emacs in.  Since
 623 ### we may be creating several layers of directories (for example,
 624 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
 625 ### instead of mkdir.  Not all systems' mkdir programs have the `-p' flag.
 626 ### We set the umask so that any created directories are world-readable.
 627 ### FIXME it would be good to warn about non-standard permissions of
 628 ### pre-existing directories, but that does not seem easy.
 629 mkdir: FRC
 630         icondirs= ; \
 631         for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \
 632           if [ -d $${dir} ]; then \
 633             icondirs="$${icondirs} $${dir}" ; \
 634           fi ; \
 635         done ; \
 636         icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
 637         umask 022 ; \
 638         $(srcdir)/mkinstalldirs $(DESTDIR)${datadir} ${COPYDESTS} \
 639           $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
 640           $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
 641           $(DESTDIR)${datadir}/emacs/site-lisp \
 642           $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
 643           $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
 644           $(DESTDIR)${desktopdir} $${icondirs}
 645
 646 ### Delete all the installed files that the `install' target would
 647 ### create (but not the noninstalled files such as `make all' would create).
 648 ###
 649 ### Don't delete the lisp and etc directories if they're in the source tree.
 650 uninstall:
 651         (cd lib-src;                                    \
 652          $(MAKE) $(MFLAGS) uninstall                    \
 653             prefix=${prefix} exec_prefix=${exec_prefix} \
 654             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
 655         -unset CDPATH; \
 656         for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do        \
 657           if [ -d $${dir} ]; then                       \
 658             case `(cd $${dir} ; /bin/pwd)` in           \
 659               `(cd ${srcdir} ; /bin/pwd)`* ) ;;         \
 660               * ) rm -rf $${dir} ;;                     \
 661             esac ;                                      \
 662             case $${dir} in                             \
 663               $(DESTDIR)${datadir}/emacs/${version}/* )         \
 664                 rm -rf $(DESTDIR)${datadir}/emacs/${version}    \
 665               ;;                                        \
 666             esac ;                                      \
 667           fi ;                                          \
 668         done
 669         (cd $(DESTDIR)${archlibdir} && rm -f fns-*)
 670         -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
 671         (cd $(DESTDIR)${infodir} && \
 672           for elt in $(INFO_FILES); do \
 673             $(INSTALL_INFO) --remove --info-dir=. $$elt; \
 674             for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 675               rm -f $$f; \
 676             done; \
 677           done;)
 678         (cd $(DESTDIR)${man1dir}  && rm -f $(MAN_PAGES))
 679         (cd $(DESTDIR)${bindir}  && rm -f $(EMACSFULL) $(EMACS))
 680         (cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg )
 681         -rm -f $(DESTDIR)${desktopdir}/emacs.desktop
 682         for file in snake-scores tetris-scores; do \
 683           file=$(DESTDIR)${gamedir}/$${file}; \
 684           [ -s $${file} ] || rm -f $$file; \
 685         done
 686
 687 FRC:
 688
 689 # ==================== Cleaning up and miscellanea ====================
 690
 691 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
 692
 693 ### `mostlyclean'
 694 ###      Like `clean', but may refrain from deleting a few files that people
 695 ###      normally don't want to recompile.  For example, the `mostlyclean'
 696 ###      target for GCC does not delete `libgcc.a', because recompiling it
 697 ###      is rarely necessary and takes a lot of time.
 698 mostlyclean: FRC
 699         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 700         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 701         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 702         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 703         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) mostlyclean)
 704         -(cd doc/misc &&   $(MAKE) $(MFLAGS) mostlyclean)
 705         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) mostlyclean)
 706         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)
 707         (cd leim;     $(MAKE) $(MFLAGS) mostlyclean)
 708
 709 ### `clean'
 710 ###      Delete all files from the current directory that are normally
 711 ###      created by building the program.  Don't delete the files that
 712 ###      record the configuration.  Also preserve files that could be made
 713 ###      by building, but normally aren't because the distribution comes
 714 ###      with them.
 715 ###
 716 ###      Delete `.dvi' files here if they are not part of the distribution.
 717 clean: FRC
 718         (cd src;      $(MAKE) $(MFLAGS) clean)
 719         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 720         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 721         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 722         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 723         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 724         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 725         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 726         (cd leim;     $(MAKE) $(MFLAGS) clean)
 727
 728 ### `bootclean'
 729 ###      Delete all files that need to be remade for a clean bootstrap.
 730 top_bootclean=\
 731         rm -f config.cache config.log
 732 ### `distclean'
 733 ###      Delete all files from the current directory that are created by
 734 ###      configuring or building the program.  If you have unpacked the
 735 ###      source and built the program without creating any other files,
 736 ###      `make distclean' should leave only the files that were in the
 737 ###      distribution.
 738 top_distclean=\
 739         ${top_bootclean}; \
 740         rm -f config.status Makefile ${SUBDIR_MAKEFILES}
 741 distclean: FRC
 742         (cd src;      $(MAKE) $(MFLAGS) distclean)
 743         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 744         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 745         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 746         (cd doc/emacs &&    $(MAKE) $(MFLAGS) distclean)
 747         (cd doc/misc &&    $(MAKE) $(MFLAGS) distclean)
 748         (cd doc/lispref &&    $(MAKE) $(MFLAGS) distclean)
 749         (cd doc/lispintro &&    $(MAKE) $(MFLAGS) distclean)
 750         (cd leim;     $(MAKE) $(MFLAGS) distclean)
 751         (cd lisp;     $(MAKE) $(MFLAGS) distclean)
 752         ${top_distclean}
 753
 754 ### `bootstrap-clean'
 755 ###      Delete everything that can be reconstructed by `make' and that
 756 ###      needs to be deleted in order to force a bootstrap from a clean state.
 757 bootstrap-clean: FRC
 758         (cd src;      $(MAKE) $(MFLAGS) bootstrap-clean)
 759         (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
 760         (cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)
 761         (cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)
 762         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) maintainer-clean)
 763         -(cd doc/misc &&   $(MAKE) $(MFLAGS) maintainer-clean)
 764         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)
 765         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)
 766         (cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)
 767         (cd lisp;     $(MAKE) $(MFLAGS) bootstrap-clean)
 768         ${top_bootclean}
 769
 770 ### `maintainer-clean'
 771 ###      Delete everything from the current directory that can be
 772 ###      reconstructed with this Makefile.  This typically includes
 773 ###      everything deleted by distclean, plus more: C source files
 774 ###      produced by Bison, tags tables, info files, and so on.
 775 ###
 776 ###      One exception, however: `make maintainer-clean' should not delete
 777 ###      `configure' even if `configure' can be remade using a rule in the
 778 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 779 ###      anything that needs to exist in order to run `configure' and then
 780 ###      begin to build the program.
 781 maintainer-clean: bootstrap-clean FRC
 782         (cd src;      $(MAKE) $(MFLAGS) maintainer-clean)
 783         (cd lisp;     $(MAKE) $(MFLAGS) maintainer-clean)
 784         ${top_distclean}
 785
 786 ### This doesn't actually appear in the coding standards, but Karl
 787 ### says GCC supports it, and that's where the configuration part of
 788 ### the coding standards seem to come from.  It's like distclean, but
 789 ### it deletes backup and autosave files too.
 790 extraclean:
 791         for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 792         ${top_distclean}
 793         -rm -f config-tmp-*
 794         -rm -f *~ \#*
 795
 796 # The src subdir knows how to do the right thing
 797 # even when the build directory and source dir are different.
 798 TAGS tags: lib-src src
 799         cd src; $(MAKE) tags
 800
 801 check:
 802         @echo "We don't have any tests for GNU Emacs yet."
 803
 804 dist:
 805         cd ${srcdir}; ./make-dist
 806
 807 .PHONY: info dvi dist check html
 808
 809 info-real:
 810         (cd doc/emacs; $(MAKE) $(MFLAGS) info)
 811         (cd doc/misc; $(MAKE) $(MFLAGS) info)
 812         (cd doc/lispref; $(MAKE) $(MFLAGS) info)
 813         (cd doc/lispintro; $(MAKE) $(MFLAGS) info)
 814
 815 force-info:
 816 # Note that man/Makefile knows how to put the info files in $(srcdir),
 817 # so we can do ok running make in the build dir.
 818 # This used to have a clause that exited with an error if MAKEINFO = no.
 819 # But it is inappropriate to do so without checking if makeinfo is
 820 # actually needed - it is not if the info files are up-to-date.  (Bug#3982)
 821 # Only the doc/*/Makefiles can decide that, so we let those rules run
 822 # and give a standard error if makeinfo is needed but missing.
 823 # While it would be nice to give a more detailed error message, that
 824 # would require changing every rule in doc/ that builds an info file,
 825 # and it's not worth it.  This case is only relevant if you download a
 826 # release, then change the .texi files.
 827 info: force-info
 828         @if test "$(MAKEINFO)" = "off"; then \
 829           echo "Configured --without-makeinfo, not building manuals" ; \
 830         else \
 831           $(MAKE) $(MFLAGS) info-real ; \
 832         fi
 833
 834 # The info/dir file must be updated by hand when new manuals are added.
 835 check-info-dir: info
 836         cd info ; \
 837         missing= ; \
 838         for file in *; do \
 839           test -f "$${file}" || continue ; \
 840           case $${file} in \
 841             *-[0-9]*|COPYING|dir) continue ;; \
 842           esac ; \
 843           grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
 844         done ; \
 845         if test -n "$${missing}"; then \
 846           echo "Missing info/dir entries: $${missing}" ; \
 847           exit 1 ; \
 848         fi ; \
 849         echo "info/dir is OK"
 850
 851 dvi:
 852         (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
 853         (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
 854         (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
 855         (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
 856
 857 #### Bootstrapping.
 858
 859 ### This first cleans the lisp subdirectory, removing all compiled
 860 ### Lisp files.  Then re-run make to build all the files anew.
 861
 862 .PHONY: bootstrap
 863
 864 bootstrap: bootstrap-clean FRC
 865         if [ -x ./config.status ]; then           \
 866             ./config.status;                      \
 867         else                                      \
 868             ./configure --enable-maintainer-mode; \
 869         fi
 870         $(MAKE) $(MFLAGS) info all
 871
 872 .PHONY: check-declare
 873
 874 check-declare:
 875         @if [ ! -e $(srcdir)/src/emacs ]; then \
 876           echo "You must build Emacs to use this command"; \
 877           exit 1; \
 878         fi
 879         (cd leim; $(MAKE) $(MFLAGS) $@)
 880         (cd lisp; $(MAKE) $(MFLAGS) $@)