1 # DIST: This is the distribution Makefile for Emacs. configure can
2 # DIST: make most of the changes to this file you might want, so try
5 # make all to compile and build Emacs.
6 # make install to install it.
7 # make TAGS to update tags tables.
9 # make clean or make mostlyclean
10 # Delete all files from the current directory that are normally
11 # created by building the program. Don't delete the files that
12 # record the configuration. Also preserve files that could be made
13 # by building, but normally aren't because the distribution comes
16 # Delete `.dvi' files here if they are not part of the distribution.
19 # Delete all files from the current directory that are created by
20 # configuring or building the program. If you have unpacked the
21 # source and built the program without creating any other files,
22 # `make distclean' should leave only the files that were in the
26 # Delete everything from the current directory that can be
27 # reconstructed with this Makefile. This typically includes
28 # everything deleted by distclean, plus more: C source files
29 # produced by Bison, tags tables, info files, and so on.
32 # Still more severe - delete backup and autosave files, too.
36 # If Make doesn't predefine MAKE, set it here.
39 # ==================== Things `configure' Might Edit ====================
43 C_SWITCH_SYSTEM
=@c_switch_system@
47 C_SWITCH_X_SITE
=@C_SWITCH_X_SITE@
48 LD_SWITCH_X_SITE
=@LD_SWITCH_X_SITE@
51 ### These help us choose version- and architecture-specific directories
52 ### to install files in.
54 ### This should be the number of the Emacs version we're building,
55 ### like `18.59' or `19.0'.
58 ### This should be the name of the configuration we're building Emacs
59 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
60 configuration
=@configuration@
62 # ==================== Where To Install Things ====================
64 # The default location for installation. Everything is placed in
65 # subdirectories of this directory. The default values for many of
66 # the variables below are expressed in terms of this one, so you may
67 # not need to change them. This defaults to /usr/local.
70 # Like `prefix', but used for architecture-specific files.
71 exec_prefix=@
exec_prefix@
73 # Where to install Emacs and other binaries that people will want to
74 # run directly (like etags).
77 # Where to install architecture-independent data files. ${lispdir}
78 # and ${etcdir} are subdirectories of this.
81 # Where to install and expect the files that Emacs modifies as it
82 # runs. These files are all architecture-independent. Right now, the
83 # only such data is the locking directory; ${lockdir} is a
84 # subdirectory of this.
85 sharedstatedir
=@
statedir@
87 # Where to install and expect executable files to be run by Emacs
88 # rather than directly by users, and other architecture-dependent
89 # data. ${archlibdir} is a subdirectory of this.
90 libexecdir
=@libexecdir@
92 # Where to install Emacs's man pages, and what extension they should have.
96 # Where to install and expect the info files describing Emacs. In the
97 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
98 # since there are now many packages documented with the texinfo
99 # system, it is inappropriate to imply that it is part of Emacs.
102 # Where to find the source code. The source code for Emacs's C kernel is
103 # expected to be in ${srcdir}/src, and the source code for Emacs's
104 # utility programs is expected to be in ${srcdir}/lib-src. This is
105 # set by the configure script's `--srcdir' option.
108 # Tell make where to find source files; this is needed for the makefiles.
111 # ==================== Emacs-specific directories ====================
113 # These variables hold the values Emacs will actually use. They are
114 # based on the values of the standard Make variables above.
116 # Where to install the lisp files distributed with
117 # Emacs. This includes the Emacs version, so that the
118 # lisp files for different versions of Emacs will install
119 # themselves in separate directories.
122 # Directories Emacs should search for lisp files specific
123 # to this site (i.e. customizations), before consulting
124 # ${lispdir}. This should be a colon-separated list of
126 locallisppath
=@locallisppath@
128 # Where Emacs will search to find its lisp files. Before
129 # changing this, check to see if your purpose wouldn't
130 # better be served by changing locallisppath. This
131 # should be a colon-separated list of directories.
134 # Where Emacs will search for its lisp files while
135 # building. This is only used during the process of
136 # compiling Emacs, to help Emacs find its lisp files
137 # before they've been installed in their final location.
138 # It's usually identical to lisppath, except that
139 # it does not include locallisppath, and the
140 # entry for the directory containing the installed lisp
141 # files has been replaced with ../lisp. This should be a
142 # colon-separated list of directories.
143 buildlisppath
=${srcdir}/lisp
145 # Where to install the other architecture-independent
146 # data files distributed with Emacs (like the tutorial,
147 # the cookie recipes and the Zippy database). This path
148 # usually contains the Emacs version number, so the data
149 # files for multiple versions of Emacs may be installed
153 # Where to create and expect the locking directory, where
154 # the Emacs locking code keeps track of which files are
155 # currently being edited.
158 # Where to put executables to be run by Emacs rather than
159 # the user. This path usually includes the Emacs version
160 # and configuration name, so that multiple configurations
161 # for multiple versions of Emacs may be installed at
163 archlibdir
=@archlibdir@
165 # Where to put the docstring file.
168 # ==================== Utility Programs for the Build ====================
170 # Allow the user to specify the install program.
172 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
173 INSTALL_DATA
= @INSTALL_DATA@
175 # ============================= Targets ==============================
177 # What emacs should be called when installed.
180 # Subdirectories to make recursively. `lisp' is not included
181 # because the compiled lisp files are part of the distribution
182 # and you cannot remake them without installing Emacs first.
185 # The makefiles of the directories in $SUBDIR.
186 SUBDIR_MAKEFILES
= lib-src
/Makefile src
/Makefile oldXMenu
/Makefile lwlib
/Makefile
188 # Subdirectories to install, and where they'll go.
189 # lib-src's makefile knows how to install it, so we don't do that here.
190 # When installing the info files, we need to do special things to
191 # avoid nuking an existing dir file, so we don't do that here;
192 # instead, we have written out explicit code in the `install' targets.
193 COPYDIR
= ${srcdir}/etc
${srcdir}/lisp
194 COPYDESTS
= ${etcdir} ${lispdir}
196 all: paths-force
${SUBDIR}
198 removenullpaths
=sed
-e
's/^://g' -e
's/:$$//g' -e
's/::/:/g'
200 # Note that sed is not in /bin on 386bsd.
201 src
/paths.h
: Makefile
${srcdir}/src
/paths.h.in
202 @echo
"Producing \`src/paths.h' from \`src/paths.h.in'."
203 @
(lisppath
=`echo ${lisppath} | ${removenullpaths}` ; \
204 buildlisppath
=`echo ${buildlisppath} | ${removenullpaths}` ; \
205 sed
< ${srcdir}/src
/paths.h.in
> paths.h.tmp
$$$$ \
206 -e
's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
207 -e
's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
208 -e
's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
209 -e
's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
210 -e
's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
211 -e
's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
212 -e
's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') && \
213 ${srcdir}/move-if-change paths.h.tmp
$$$$ src
/paths.h
216 # we force the rebuilding of src/paths.h because the user might give
217 # make different values for the various directories. Since we use
218 # move-if-change, src/paths.h only actually changes if the user did
219 # something notable, so the only unnecessary work we do is in building
220 # paths.h.tmp$$$$, which isn't much.
221 # Note that sed is not in /bin on 386bsd.
222 # We depend on src/paths.h here to prevent simultaneous execution of
223 # that rule and this one, in a parallel make.
224 # It is possible for paths.h to be updated twice--but that would happen anyway.
225 paths-force
: FRC src
/paths.h
226 @echo
"Producing \`src/paths.h' from \`src/paths.h.in'."
227 @
(lisppath
=`echo ${lisppath} | ${removenullpaths}` ; \
228 buildlisppath
=`echo ${buildlisppath} | ${removenullpaths}` ; \
229 sed
< ${srcdir}/src
/paths.h.in
> paths.h.tmp
$$$$ \
230 -e
's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
231 -e
's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
232 -e
's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
233 -e
's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
234 -e
's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
235 -e
's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
236 -e
's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') && \
237 ${srcdir}/move-if-change paths.h.tmp
$$$$ src
/paths.h
239 src
: lib-src FRC src
/paths.h
241 # This ought to depend on src/paths.h, so that in parallel make
242 # src/paths.h will be available for the compilations in lib-src.
243 # But that causes trouble in `make install' if a different prefix
244 # is specified at that time.
245 lib-src
: FRC src
/paths.h
247 .RECURSIVE
: ${SUBDIR}
249 ${SUBDIR}: ${SUBDIR_MAKEFILES} FRC
250 cd
$@
; $(MAKE
) all $(MFLAGS
) \
251 CC
='${CC}' CFLAGS
='${CFLAGS}' CPPFLAGS
='${CPPFLAGS}' \
252 LDFLAGS
='${LDFLAGS}' MAKE
='${MAKE}'
254 blessmail
: ${SUBDIR_MAKEFILES} src FRC
255 cd lib-src
; $(MAKE
) maybe-blessmail
$(MFLAGS
) MAKE
='${MAKE}'
257 Makefile
: Makefile.in config.status
260 src
/Makefile
: src
/Makefile.in.in config.status
263 lib-src
/Makefile
: lib-src
/Makefile.in config.status
266 oldXMenu
/Makefile
: oldXMenu
/Makefile.in config.status
269 lwlib
/Makefile
: lwlib
/Makefile.in config.status
272 # ==================== Installation ====================
274 ## If we let lib-src do its own installation, that means we
275 ## don't have to duplicate the list of utilities to install in
276 ## this Makefile as well.
278 ## On AIX, use tar xBf.
279 ## On Xenix, use tar xpf.
281 .PHONY
: install mkdir
283 ## We delete each directory in ${COPYDESTS} before we copy into it;
284 ## that way, we can reinstall over directories that have been put in
285 ## place with their files read-only (perhaps because they are checked
286 ## into RCS). In order to make this safe, we make sure that the
287 ## source exists and is distinct from the destination.
288 ## We don't depend on `all', but rather on ${SUBDIR}, so that we won't
289 ## ever modify src/paths.h.
290 install: ${SUBDIR} install-arch-dep install-arch-indep blessmail
;
292 ### Note that we copy the DOC-* files from the build etc directory
293 ### as well as lots of things from ${srcdir}/etc.
294 install-arch-dep
: mkdir
296 $(MAKE
) install $(MFLAGS
) prefix=${prefix} \
297 exec_prefix=${exec_prefix} bindir=${bindir} \
298 libexecdir
=${libexecdir} archlibdir
=${archlibdir})
299 ${INSTALL_PROGRAM} src
/emacs
${bindir}/emacs-
${version}
300 -chmod
1755 ${bindir}/emacs-
${version}
301 rm -f
${bindir}/$(EMACS
)
302 -ln
${bindir}/emacs-
${version} ${bindir}/$(EMACS
)
304 ### Note that we copy the DOC-* files from the build etc directory
305 ### as well as lots of things from ${srcdir}/etc.
307 # These lines appeared after the second -set, but should be unnecessary.
308 # mkdir ${COPYDESTS} ; \
309 # chmod ugo+rx ${COPYDESTS} ; \
310 install-arch-indep
: mkdir
311 -set
${COPYDESTS} ; \
312 for
dir in
${COPYDIR} ; do \
313 if
[ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
318 -set
${COPYDESTS} ; \
319 for
dir in
${COPYDIR} ; do \
322 && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
323 && (echo
"Copying $${dir}..." ; \
324 (cd
$${dir}; tar -cf
- .
)|
(cd
$${dest};umask
022; tar -xvf
- ); \
325 for subdir in
`find $${dest} -type d ! -name RCS -print` ; do \
326 rm -rf
$${subdir}/RCS
; \
327 rm -rf
$${subdir}/CVS
; \
328 rm -f
$${subdir}/\
#* ; \
329 rm -f
$${subdir}/*~
; \
332 if
[ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
334 echo
"Copying etc/DOC-* ..." ; \
335 (cd etc
; tar -cf
- DOC-
*)|
(cd
${docdir}; umask
0; tar -xvf
- ); \
337 thisdir
=`/bin/pwd`; \
338 if
[ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
340 (cd
${srcdir}/info ; \
341 if
[ ! -f
${infodir}/dir ] && [ -f
dir ]; then \
342 (cd
$${thisdir}; ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir); \
344 for f in cl
* dired-x
* emacs
* forms
* gnus
* info* sc
* vip
* ; do \
345 (cd
$${thisdir}; ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f); \
348 thisdir
=`/bin/pwd`; cd
${srcdir}/etc
; for page in emacs etags ctags
; do \
349 (cd
$${thisdir}; ${INSTALL_DATA} ${srcdir}/etc
/$${page}.1 ${mandir}/$${page}${manext}); \
352 ### Build all the directories we're going to install Emacs in. Since
353 ### we may be creating several layers of directories (for example,
354 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use make-path
355 ### instead of mkdir. Not all systems' mkdirs have the `-p' flag.
357 .
/lib-src
/make-path
${COPYDESTS} ${lockdir} ${infodir} ${mandir} \
358 ${bindir} ${datadir} ${docdir} ${libexecdir} \
359 `echo ${locallisppath} | sed 's/:/ /g'`
360 -chmod
777 ${lockdir}
362 ### Delete all the installed files that the `install' target would
363 ### create (but not the noninstalled files such as `make all' would
366 ### Don't delete the lisp and etc directories if they're in the source tree.
369 $(MAKE
) $(MFLAGS
) uninstall \
370 prefix=${prefix} exec_prefix=${exec_prefix} \
371 bindir=${bindir} libexecdir
=${libexecdir} archlibdir
=${archlibdir})
372 for
dir in
${lispdir} ${etcdir} ; do \
373 if
[ -d
$${dir} ]; then \
374 case
`(cd $${dir} ; /bin/pwd)` in \
375 `(cd ${srcdir} ; /bin/pwd)`* ) ;; \
376 * ) rm -rf
$${dir} ;; \
379 ${datadir}/emacs
/${version}/* ) \
380 rm -rf
${datadir}/emacs
/${version} \
385 (cd
${infodir}; rm -f cl
* emacs
* forms
* info* vip
*)
386 (cd
${mandir}; rm -f emacs
.1 etags
.1 ctags
.1)
387 (cd
${bindir}; rm -f emacs-
${version} $(EMACS
))
392 # ==================== Cleaning up and miscellanea ====================
394 .PHONY
: mostlyclean clean distclean realclean extraclean
397 ### Like `clean', but may refrain from deleting a few files that people
398 ### normally don't want to recompile. For example, the `mostlyclean'
399 ### target for GCC does not delete `libgcc.a', because recompiling it
400 ### is rarely necessary and takes a lot of time.
402 (cd src
; $(MAKE
) $(MFLAGS
) mostlyclean)
403 (cd oldXMenu
; $(MAKE
) $(MFLAGS
) mostlyclean)
404 (cd lwlib
; $(MAKE
) $(MFLAGS
) mostlyclean)
405 (cd lib-src
; $(MAKE
) $(MFLAGS
) mostlyclean)
406 -(cd man
&& $(MAKE
) $(MFLAGS
) mostlyclean)
409 ### Delete all files from the current directory that are normally
410 ### created by building the program. Don't delete the files that
411 ### record the configuration. Also preserve files that could be made
412 ### by building, but normally aren't because the distribution comes
415 ### Delete `.dvi' files here if they are not part of the distribution.
417 (cd src
; $(MAKE
) $(MFLAGS
) clean)
418 (cd oldXMenu
; $(MAKE
) $(MFLAGS
) clean)
419 (cd lwlib
; $(MAKE
) $(MFLAGS
) clean)
420 (cd lib-src
; $(MAKE
) $(MFLAGS
) clean)
421 -(cd man
&& $(MAKE
) $(MFLAGS
) clean)
424 ### Delete all files from the current directory that are created by
425 ### configuring or building the program. If you have unpacked the
426 ### source and built the program without creating any other files,
427 ### `make distclean' should leave only the files that were in the
430 rm -f config.status build-install
; \
431 rm -f Makefile
${SUBDIR_MAKEFILES} ; \
434 (cd src
; $(MAKE
) $(MFLAGS
) distclean)
435 (cd oldXMenu
; $(MAKE
) $(MFLAGS
) distclean)
436 (cd lwlib
; $(MAKE
) $(MFLAGS
) distclean)
437 (cd lib-src
; $(MAKE
) $(MFLAGS
) distclean)
438 (cd man
&& $(MAKE
) $(MFLAGS
) distclean)
443 ### Delete everything from the current directory that can be
444 ### reconstructed with this Makefile. This typically includes
445 ### everything deleted by distclean, plus more: C source files
446 ### produced by Bison, tags tables, info files, and so on.
448 ### One exception, however: `make realclean' should not delete
449 ### `configure' even if `configure' can be remade using a rule in the
450 ### Makefile. More generally, `make realclean' should not delete
451 ### anything that needs to exist in order to run `configure' and then
452 ### begin to build the program.
454 (cd src
; $(MAKE
) $(MFLAGS
) realclean)
455 (cd oldXMenu
; $(MAKE
) $(MFLAGS
) realclean)
456 (cd lwlib
; $(MAKE
) $(MFLAGS
) realclean)
457 (cd lib-src
; $(MAKE
) $(MFLAGS
) realclean)
458 -(cd man
&& $(MAKE
) $(MFLAGS
) realclean)
461 ### This doesn't actually appear in the coding standards, but Karl
462 ### says GCC supports it, and that's where the configuration part of
463 ### the coding standards seem to come from. It's like distclean, but
464 ### it deletes backup and autosave files too.
466 for i in
${SUBDIR}; do
(cd
$$i; $(MAKE
) $(MFLAGS
) extraclean
); done
468 -rm config.status config-tmp-
*
471 ### Unlocking and relocking. The idea of these productions is to reduce
472 ### hassles when installing an incremental tar of Emacs. Do `make unlock'
473 ### before unlocking the file to take the write locks off all sources so
474 ### that tar xvof will overwrite them without fuss. Then do `make relock'
475 ### afterward so that VC mode will know which files should be checked in
476 ### if you want to mung them.
478 ### Note: it's no disaster if these productions miss a file or two; tar
479 ### and VC will swiftly let you know if this happens, and it is easily
481 SOURCES
= ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
482 README build-install.in configure make-dist move-if-change
484 .PHONY
: unlock relock
487 chmod u
+w
$(SOURCES
) cpp/*
488 -(cd elisp
; chmod u
+w Makefile README
*.texi
)
489 (cd etc
; $(MAKE
) $(MFLAGS
) unlock
)
490 (cd lib-src
; $(MAKE
) $(MFLAGS
) unlock
)
491 (cd lisp
; $(MAKE
) $(MFLAGS
) unlock
)
492 (cd lisp
/term
; chmod u
+w README
*.el
)
493 (cd man
; chmod u
+w
*texi
* ChangeLog split-man
)
494 (cd oldXMenu
; chmod u
+w
*.
[ch
] Makefile README
)
495 (cd lwlib
; chmod u
+w
*.
[ch
] Makefile README
)
496 (cd src
; $(MAKE
) $(MFLAGS
) unlock
)
499 chmod u-w
$(SOURCES
) cpp/*
500 -(cd elisp
; chmod u-w Makefile README
*.texi
)
501 (cd etc
; $(MAKE
) $(MFLAGS
) relock
)
502 (cd lib-src
; $(MAKE
) $(MFLAGS
) relock
)
503 (cd lisp
; $(MAKE
) $(MFLAGS
) relock
)
504 (cd lisp
/term
; chmod u
+w README
*.el
)
505 (cd man
; chmod u
+w
*texi
* ChangeLog split-man
)
506 (cd oldXMenu
; chmod u
+w
*.
[ch
] Makefile README
)
507 (cd lwlib
; chmod u
+w
*.
[ch
] Makefile README
)
508 (cd src
; $(MAKE
) $(MFLAGS
) relock
)
511 cd
${srcdir}/src
; $(MAKE
) tags
514 @echo
"We don't have any tests for GNU Emacs yet."
517 cd
${srcdir}; make-dist
519 .PHONY
: info dvi dist check
522 (cd
${srcdir}/man
; $(MAKE
) $(MFLAGS
) info)
524 (cd
${srcdir}/man
; $(MAKE
) $(MFLAGS
) dvi)