Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # Copyright (C) 1992-2011  Free Software Foundation, Inc.
   6
   7 # This file is part of GNU Emacs.
   8
   9 # GNU Emacs is free software: you can redistribute it and/or modify
  10 # it under the terms of the GNU General Public License as published by
  11 # the Free Software Foundation, either version 3 of the License, or
  12 # (at your option) any later version.
  13
  14 # GNU Emacs is distributed in the hope that it will be useful,
  15 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  16 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17 # GNU General Public License for more details.
  18
  19 # You should have received a copy of the GNU General Public License
  20 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
  21
  22 ### Commentary:
  23
  24 # make all      to compile and build Emacs.
  25 # make install  to install it.
  26 # make TAGS     to update tags tables.
  27 #
  28 # make clean  or  make mostlyclean
  29 #      Delete all files from the current directory that are normally
  30 #      created by building the program.  Don't delete the files that
  31 #      record the configuration.  Also preserve files that could be made
  32 #      by building, but normally aren't because the distribution comes
  33 #      with them.
  34 #
  35 #      Delete `.dvi' files here if they are not part of the distribution.
  36 #
  37 # make distclean
  38 #      Delete all files from the current directory that are created by
  39 #      configuring or building the program.  If you have unpacked the
  40 #      source and built the program without creating any other files,
  41 #      `make distclean' should leave only the files that were in the
  42 #      distribution.
  43 #
  44 # make maintainer-clean
  45 #      Delete everything from the current directory that can be
  46 #      reconstructed with this Makefile.  This typically includes
  47 #      everything deleted by distclean, plus more: .elc files,
  48 #      C source files produced by Bison, tags tables, info files,
  49 #      and so on.
  50 #
  51 # make extraclean
  52 #      Still more severe - delete backup and autosave files, too.
  53 #
  54 # make bootstrap
  55 #      Removes all the compiled files to force a new bootstrap from a
  56 #      clean slate, and then build in the normal way.
  57
  58 SHELL = /bin/sh
  59
  60 # This may not work with certain non-GNU make's.  It only matters when
  61 # inheriting a CDPATH not starting with the current directory.
  62 CDPATH=
  63
  64 # If Make doesn't predefine MAKE, set it here.
  65 @SET_MAKE@
  66
  67 # ==================== Things `configure' Might Edit ====================
  68
  69 CC=@CC@
  70 CFLAGS=@CFLAGS@
  71 LDFLAGS=@LDFLAGS@
  72 CPPFLAGS=@CPPFLAGS@
  73 EXEEXT=@EXEEXT@
  74
  75 ### These help us choose version- and architecture-specific directories
  76 ### to install files in.
  77
  78 ### This should be the number of the Emacs version we're building,
  79 ### like `18.59' or `19.0'.
  80 version=@version@
  81
  82 ### This should be the name of the configuration we're building Emacs
  83 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  84 configuration=@configuration@
  85
  86 # ==================== Where To Install Things ====================
  87
  88 # The default location for installation.  Everything is placed in
  89 # subdirectories of this directory.  The default values for many of
  90 # the variables below are expressed in terms of this one, so you may
  91 # not need to change them.  This defaults to /usr/local.
  92 prefix=@prefix@
  93
  94 # Like `prefix', but used for architecture-specific files.
  95 exec_prefix=@exec_prefix@
  96
  97 # Where to install Emacs and other binaries that people will want to
  98 # run directly (like etags).
  99 bindir=@bindir@
 100
 101 # The root of the directory tree for read-only architecture-independent
 102 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 103 datarootdir=@datarootdir@
 104
 105 # Where to install architecture-independent data files.  ${lispdir}
 106 # and ${etcdir} are subdirectories of this.
 107 datadir=@datadir@
 108
 109 # Where to install and expect the files that Emacs modifies as it
 110 # runs.  These files are all architecture-independent.
 111 # Right now, this is not used.
 112 sharedstatedir=@sharedstatedir@
 113
 114 # Where to install and expect executable files to be run by Emacs
 115 # rather than directly by users, and other architecture-dependent
 116 # data.  ${archlibdir} is a subdirectory of this.
 117 libexecdir=@libexecdir@
 118
 119 # Where to install Emacs's man pages.
 120 # This used to allow choice of the numeric extension, but this made
 121 # little sense since the files were always installed in man1/
 122 # (and they contain cross-references that expect them to be there).
 123 mandir=@mandir@
 124 man1dir=$(mandir)/man1
 125 MAN_PAGES=ctags.1 ebrowse.1 emacs.1 emacsclient.1 etags.1 \
 126           grep-changelog.1 rcs-checkin.1
 127
 128 # Where to install and expect the info files describing Emacs.  In the
 129 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
 130 # since there are now many packages documented with the texinfo
 131 # system, it is inappropriate to imply that it is part of Emacs.
 132 infodir=@infodir@
 133 INFO_FILES=ada-mode auth autotype calc ccmode cl dbus dired-x ebrowse   \
 134            ede ediff edt eieio efaq eintr elisp emacs emacs-mime epa erc \
 135            ert eshell eudc flymake forms gnus idlwave info mairix-el    \
 136            message mh-e newsticker nxml-mode org pcl-cvs pgg rcirc      \
 137            reftex remember sasl sc semantic ses sieve smtpmail speedbar \
 138            tramp url vip viper widget woman
 139
 140 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
 141 HAVE_MAKEINFO=@HAVE_MAKEINFO@
 142
 143 # Directory for local state files for all programs.
 144 localstatedir=@localstatedir@
 145
 146 # Where to look for bitmap files.
 147 bitmapdir=@bitmapdir@
 148
 149 # Where to find the source code.  The source code for Emacs's C kernel is
 150 # expected to be in ${srcdir}/src, and the source code for Emacs's
 151 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 152 # set by the configure script's `--srcdir' option.
 153
 154 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 155 srcdir=@srcdir@
 156
 157 # Where the manpage source files are kept.
 158 mansrcdir=$(srcdir)/doc/man
 159
 160 # Tell make where to find source files; this is needed for the makefiles.
 161 VPATH=@srcdir@
 162
 163 # Where to find the application default.
 164 x_default_search_path=@x_default_search_path@
 165
 166 # Location to install Emacs.app under NeXT/Open/GNUstep / Cocoa
 167 ns_appbindir=@ns_appbindir@
 168 ns_appresdir=@ns_appresdir@
 169
 170 # Where the etc/emacs.desktop file is to be installed.
 171 desktopdir=$(datarootdir)/applications
 172
 173 # Where the etc/images/icons/hicolor directory is to be installed.
 174 icondir=$(datarootdir)/icons
 175
 176 # The source directory for the icon files.
 177 iconsrcdir=$(srcdir)/etc/images/icons
 178
 179 # ==================== Emacs-specific directories ====================
 180
 181 # These variables hold the values Emacs will actually use.  They are
 182 # based on the values of the standard Make variables above.
 183
 184 # Where to install the lisp files distributed with
 185 # Emacs.  This includes the Emacs version, so that the
 186 # lisp files for different versions of Emacs will install
 187 # themselves in separate directories.
 188 lispdir=@lispdir@
 189
 190 # Directories Emacs should search for lisp files specific
 191 # to this site (i.e. customizations), before consulting
 192 # ${lispdir}.  This should be a colon-separated list of
 193 # directories.
 194 locallisppath=@locallisppath@
 195
 196 # Where Emacs will search to find its lisp files.  Before
 197 # changing this, check to see if your purpose wouldn't
 198 # better be served by changing locallisppath.  This
 199 # should be a colon-separated list of directories.
 200 lisppath=@lisppath@
 201
 202 # Where Emacs will search for its lisp files while
 203 # building.  This is only used during the process of
 204 # compiling Emacs, to help Emacs find its lisp files
 205 # before they've been installed in their final location.
 206 # It's usually identical to lisppath, except that
 207 # it does not include locallisppath, and the
 208 # entry for the directory containing the installed lisp
 209 # files has been replaced with ../lisp.  This should be a
 210 # colon-separated list of directories.
 211 buildlisppath=${srcdir}/lisp
 212
 213 # Where to install the other architecture-independent
 214 # data files distributed with Emacs (like the tutorial,
 215 # the cookie recipes and the Zippy database). This path
 216 # usually contains the Emacs version number, so the data
 217 # files for multiple versions of Emacs may be installed
 218 # at once.
 219 etcdir=@etcdir@
 220
 221 # Where to put executables to be run by Emacs rather than
 222 # the user.  This path usually includes the Emacs version
 223 # and configuration name, so that multiple configurations
 224 # for multiple versions of Emacs may be installed at
 225 # once.
 226 archlibdir=@archlibdir@
 227
 228 # Where to put the docstring file.
 229 docdir=@docdir@
 230
 231 # Where to install Emacs game score files.
 232 gamedir=@gamedir@
 233
 234 # ==================== Utility Programs for the Build ====================
 235
 236 # Allow the user to specify the install program.
 237 INSTALL = @INSTALL@
 238 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 239 INSTALL_DATA = @INSTALL_DATA@
 240 INSTALL_INFO = @INSTALL_INFO@
 241 # By default, we uphold the dignity of our programs.
 242 INSTALL_STRIP =
 243
 244 # We use gzip to compress installed .el files.
 245 GZIP_PROG = @GZIP_PROG@
 246 # If non-nil, gzip the installed Info and man pages.
 247 GZIP_INFO = @GZIP_INFO@
 248
 249 # ============================= Targets ==============================
 250
 251 # Program name transformation.
 252 TRANSFORM = @program_transform_name@
 253
 254 # What emacs should be called when installed.
 255 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
 256 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
 257
 258 # Subdirectories to make recursively.  `lisp' is not included
 259 # because the compiled lisp files are part of the distribution.
 260 # leim is not included because it needs special handling.
 261 #
 262 # Actually, we now include `lisp' as well, since the compiled files
 263 # are not included any more in case of bootstrap or in case Emacs was
 264 # checked out from a VCS.
 265 SUBDIR = lib lib-src src lisp
 266
 267 # The subdir makefiles created by config.status.
 268 SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
 269 SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
 270
 271 # Subdirectories to install, and where they'll go.
 272 # lib-src's makefile knows how to install it, so we don't do that here.
 273 # leim's makefile also knows how to install it, so we don't do that here.
 274 # When installing the info files, we need to do special things to
 275 # avoid nuking an existing dir file, so we don't do that here;
 276 # instead, we have written out explicit code in the `install' targets.
 277 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 278 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
 279
 280 all: ${SUBDIR} leim
 281
 282 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
 283
 284 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 285 # See comments in configure.in for why it is done this way, as opposed
 286 # to just letting configure generate epaths.h from epaths.in in a
 287 # similar way to how Makefile is made from Makefile.in.
 288 epaths-force: FRC
 289         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 290           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 291           x_default_search_path=`echo ${x_default_search_path}`; \
 292           gamedir=`echo ${gamedir}`; \
 293           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 294           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";'      \
 295           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 296           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 297           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 298           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 299           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 300           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 301           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 302           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') &&                \
 303         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 304
 305 # For parallel make, src should be built before leim.
 306 # "export PARALLEL=0" is for SGI's Make, to prevent it from
 307 # running more than 1 process in the leim directory, especially for
 308 # the $TIT files there.
 309 leim:   src Makefile FRC
 310         (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
 311           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 312           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
 313
 314 lib-src src: lib
 315
 316 src:    lib-src FRC
 317
 318 .RECURSIVE: ${SUBDIR} leim
 319
 320 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
 321 lisp: src
 322
 323 # Maintainers can put a copy of gnulib into $(gnulib_srcdir).
 324 gnulib_srcdir = ../gnulib
 325 $(gnulib_srcdir):
 326         git clone git://git.savannah.gnu.org/gnulib.git $@
 327
 328 # A shorter name that satisfies MS-DOS 8+3 constraints.
 329 DOS_gnulib_comp.m4 = gl-comp.m4
 330
 331 # Update modules from gnulib, for maintainers, who should have it in
 332 # $(gnulib_srcdir) (relative to $(srcdir) and should have build tools
 333 # as per $(gnulib_srcdir)/DEPENDENCIES.
 334 GNULIB_MODULES = \
 335   alloca-opt \
 336   careadlinkat crypto/md5 crypto/sha1 crypto/sha256 crypto/sha512 dtoastr \
 337   dup2 \
 338   filemode getloadavg getopt-gnu ignore-value intprops lstat \
 339   mktime pthread_sigmask readlink \
 340   socklen stdarg stdio strftime strtoimax strtoumax symlink sys_stat
 341 GNULIB_TOOL_FLAGS = \
 342  --avoid=msvc-inval --avoid=msvc-nothrow --avoid=pathmax \
 343  --avoid=raise --avoid=threadlib \
 344  --conditional-dependencies --import --no-changelog --no-vc-files \
 345  --makefile-name=gnulib.mk
 346 sync-from-gnulib: $(gnulib_srcdir)
 347         -cd $(srcdir)/m4 && cp $(DOS_gnulib_comp.m4) gnulib-comp.m4
 348         cd $(srcdir) && \
 349           $(gnulib_srcdir)/gnulib-tool $(GNULIB_TOOL_FLAGS) $(GNULIB_MODULES)
 350         cd $(srcdir)/m4 && rm gnulib-cache.m4 warn-on-use.m4
 351         cd $(srcdir)/m4 && mv gnulib-comp.m4 $(DOS_gnulib_comp.m4)
 352         cp $(gnulib_srcdir)/build-aux/texinfo.tex $(srcdir)/doc/misc
 353         cp \
 354           $(gnulib_srcdir)/build-aux/move-if-change \
 355           $(srcdir)/build-aux
 356         cd $(srcdir) && autoreconf -i -I m4
 357 .PHONY: sync-from-gnulib
 358
 359 # These targets should be "${SUBDIR} without `src'".
 360 lib lib-src lisp: Makefile FRC
 361         cd $@; $(MAKE) all $(MFLAGS)                           \
 362           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 363           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 364
 365 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
 366 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
 367 # constructed yet) or the empty string (otherwise).
 368 # src/Makefile.in uses it to implement conditional dependencies, so that
 369 # files that need bootstrap-emacs to be built do not additionally need
 370 # to be kept fresher than bootstrap-emacs.  Otherwise changing a single
 371 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
 372 # all preloaded elisp files, and only then dump the actual src/emacs, which
 373 # is not wrong, but is overkill in 99.99% of the cases.
 374 src: Makefile FRC
 375         boot=bootstrap-emacs$(EXEEXT);                         \
 376         if [ ! -x "src/$$boot" ]; then                                     \
 377             cd $@; $(MAKE) all $(MFLAGS)                                   \
 378               CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}'         \
 379               LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \
 380         fi;
 381         if [ -r .bzr/checkout/dirstate ]; then                  \
 382             vcswitness="`pwd`/.bzr/checkout/dirstate";  \
 383         fi;                                                     \
 384         cd $@; $(MAKE) all $(MFLAGS)                           \
 385           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 386           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="" \
 387           VCSWITNESS="$$vcswitness"
 388
 389 blessmail: Makefile src FRC
 390         cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
 391           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 392
 393 # We used to have one rule per */Makefile.in, but that leads to race
 394 # conditions with parallel makes, so let's assume that the time stamp on
 395 # ./Makefile is representative of the time stamp on all the other Makefiles.
 396 Makefile: config.status $(srcdir)/src/config.in \
 397           $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN)
 398         ./config.status
 399
 400 # Don't erase config.status if make is interrupted while refreshing it.
 401 .PRECIOUS: config.status
 402
 403 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 404         if [ -x ./config.status ]; then \
 405             ./config.status --recheck;  \
 406         else                            \
 407             ./configure;                \
 408         fi
 409
 410 AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/aclocal.m4
 411
 412 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 413         cd ${srcdir} && autoconf
 414
 415 ACLOCAL_INPUTS = @MAINT@ $(srcdir)/m4/$(DOS_gnulib_comp.m4)
 416 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
 417         cd $(srcdir) && aclocal -I m4
 418
 419 AUTOMAKE_INPUTS = @MAINT@ $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am $(srcdir)/lib/gnulib.mk
 420 $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
 421         cd $(srcdir) && automake --gnu -a -c lib/Makefile
 422 am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
 423 .PHONY: am--refresh
 424
 425 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 426         @ # Usually, there's no need to rebuild src/config.in just
 427         @ # because stamp-h.in has changed (since building stamp-h.in
 428         @ # refreshes config.in as well), but if config.in is missing
 429         @ # then we really need to do something more.
 430         [ -r "$@" ] || ( cd ${srcdir} && autoheader )
 431 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 432         cd ${srcdir} && autoheader
 433         rm -f $(srcdir)/src/stamp-h.in
 434         echo timestamp > $(srcdir)/src/stamp-h.in
 435
 436 # ==================== Installation ====================
 437
 438 ## If we let lib-src do its own installation, that means we
 439 ## don't have to duplicate the list of utilities to install in
 440 ## this Makefile as well.
 441
 442 ## On AIX, use tar xBf.
 443 ## On Xenix, use tar xpf.
 444
 445 .PHONY: install mkdir
 446
 447 ## We delete each directory in ${COPYDESTS} before we copy into it;
 448 ## that way, we can reinstall over directories that have been put in
 449 ## place with their files read-only (perhaps because they are checked
 450 ## into RCS).  In order to make this safe, we make sure that the
 451 ## source exists and is distinct from the destination.
 452 ### We do install-arch-indep first because
 453 ### the executable needs the Lisp files and DOC file to work properly.
 454 install: all install-arch-indep install-arch-dep install-leim blessmail
 455         @true
 456
 457 MV_DIRS = for i in $$dir; do rm -fr `basename "$$i"` ; mv "$$i" . ; done
 458
 459 ### Install the executables that were compiled specifically for this machine.
 460 ### It would be nice to do something for a parallel make
 461 ### to ensure that install-arch-indep finishes before this starts.
 462 install-arch-dep: mkdir
 463         (cd lib-src; \
 464           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 465             exec_prefix=${exec_prefix} bindir=${bindir} \
 466             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 467             INSTALL_STRIP=${INSTALL_STRIP})
 468         ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
 469         -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
 470         rm -f $(DESTDIR)${bindir}/$(EMACS)
 471         -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
 472         if test "${ns_appresdir}" != ""; then \
 473           ( cd ${ns_appresdir} ; \
 474             if test -d share/emacs ; then dir=share/emacs/*/*; $(MV_DIRS); fi;\
 475             if test -d share/info ; then dir=share/info; $(MV_DIRS) ; fi ; \
 476             rm -fr share ) ; \
 477           ( cd ${ns_appbindir}libexec ; dir=emacs/*/*/* ; $(MV_DIRS); \
 478             rm -fr emacs ) ; \
 479           ( cd ${ns_appbindir}bin ; rm -f emacs emacs-24* ; \
 480             ln -sf ../libexec/* .) ; \
 481         else true ; fi
 482
 483 ## FIXME is the emacs-24* bit above really necessary and correct?
 484 ## What if I have 24.1 and 24.2 installed at the same time?
 485 ## In any case, it should use something like echo $version | sed 's/\..*//'
 486 ## instead of hard-coding a version.
 487
 488 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 489 ## Needs to be the user running install, so configure can't set it.
 490 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 491           `id -un 2> /dev/null`; do \
 492           [ -n "$${installuser}" ] && break ; \
 493         done
 494
 495 ### Install the files that are machine-independent.
 496 ### Most of them come straight from the distribution;
 497 ### the exception is the DOC-* files, which are copied
 498 ### from the build directory.
 499
 500 ## Note that we copy DOC* and then delete DOC
 501 ## as a workaround for a bug in tar on Ultrix 4.2.
 502
 503 ## We install only the relevant DOC file if possible
 504 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
 505
 506 ## If people complain about the h flag in tar command, take that out.
 507 ## That flag is also used in leim/Makefile.in
 508
 509 ## Note that the Makefiles in the etc directory are potentially useful
 510 ## in an installed Emacs, so should not be excluded.
 511
 512 install-arch-indep: mkdir info install-etc
 513         -set ${COPYDESTS} ; \
 514         unset CDPATH; \
 515         for dir in ${COPYDIR} ; do \
 516           if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
 517             rm -rf $$1 ; \
 518           fi ; \
 519           shift ; \
 520         done
 521         -set ${COPYDESTS} ; \
 522         mkdir ${COPYDESTS} ; \
 523         chmod ugo+rx ${COPYDESTS} ; \
 524         unset CDPATH; \
 525         $(set_installuser); \
 526         for dir in ${COPYDIR} ; do \
 527           dest=$$1 ; shift ; \
 528           [ -d $${dir} ] \
 529           && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
 530           && (echo "Copying $${dir} to $${dest}..." ; \
 531               (cd $${dir}; tar -chf - . ) \
 532                 | (cd $${dest}; umask 022; \
 533                    tar -xvf - && cat > /dev/null) || exit 1; \
 534               find $${dest} -exec chown $${installuser} {} ';' ;\
 535               for subdir in `find $${dest} -type d -print` ; do \
 536                 chmod a+rx $${subdir} ; \
 537                 rm -f  $${subdir}/.gitignore ; \
 538                 rm -f  $${subdir}/.arch-inventory ; \
 539                 rm -f  $${subdir}/.DS_Store ; \
 540                 rm -f  $${subdir}/\#* ; \
 541                 rm -f  $${subdir}/.\#* ; \
 542                 rm -f  $${subdir}/*~ ; \
 543                 rm -f  $${subdir}/*.orig ; \
 544                 [ "$${dir}" != "${srcdir}/etc" ] && \
 545                  rm -f $${subdir}/[mM]akefile*.c $${subdir}/[mM]akefile*[.-]in \
 546                    $${subdir}/[mM]akefile ; \
 547                 rm -f  $${subdir}/ChangeLog* ; \
 548               done) ; \
 549         done
 550         -rm -f $(DESTDIR)${lispdir}/subdirs.el
 551         $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
 552         if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
 553         then true; \
 554         else \
 555           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 556            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 557             > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
 558         fi
 559         chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
 560         -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
 561         then true; \
 562         else \
 563           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 564            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 565             > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
 566         fi
 567         -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
 568         -unset CDPATH; \
 569         if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
 570         then \
 571            fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
 572            if [ -f "./etc/DOC-$${fullversion}" ]; \
 573            then \
 574              docfile="DOC-$${fullversion}"; \
 575            else \
 576              docfile="DOC"; \
 577            fi; \
 578            echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
 579            (cd ./etc; tar -chf - $${docfile}) \
 580              |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 581            (cd $(DESTDIR)$(docdir); \
 582             $(set_installuser); \
 583             chown $${installuser} DOC*; chmod a+r DOC*; \
 584             if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
 585         else true; fi
 586         -unset CDPATH; \
 587         if [ -r ./lisp ] \
 588            && [ -r ./lisp/simple.el ] \
 589            && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \
 590            && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
 591         then \
 592            echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \
 593            (cd lisp; tar -chf - *.el *.elc) \
 594              |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 595            (cd $(DESTDIR)${lispdir}; \
 596             $(set_installuser); \
 597             find . -exec chown $${installuser} {} ';') ; \
 598         else true; fi
 599         -unset CDPATH; \
 600         if [ -n "${GZIP_PROG}" ]; \
 601         then \
 602            echo "Compressing *.el ..." ; \
 603            (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
 604                 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
 605             done) \
 606         else true; fi
 607         -unset CDPATH; \
 608         thisdir=`/bin/pwd`; \
 609         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 610         then \
 611           (cd $(DESTDIR)${infodir};  \
 612            if [ -f dir ]; then true; \
 613            else \
 614              (cd $${thisdir}; \
 615               ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
 616               chmod a+r $(DESTDIR)${infodir}/dir); \
 617            fi; \
 618            cd ${srcdir}/info ; \
 619            for elt in $(INFO_FILES); do \
 620               test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
 621               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 622                 ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \
 623                 chmod a+r $(DESTDIR)${infodir}/$$f; \
 624                 if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 625                   rm -f $(DESTDIR)${infodir}/$$f.gz; \
 626                   ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
 627                 else true; fi; \
 628               done; \
 629            done); \
 630         else true; fi
 631         -unset CDPATH; \
 632         thisdir=`/bin/pwd`; \
 633         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 634         then \
 635           for elt in $(INFO_FILES); do \
 636             test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
 637             (cd $${thisdir}; \
 638              ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 639           done; \
 640         else true; fi
 641         -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
 642         thisdir=`/bin/pwd`; \
 643         cd ${mansrcdir}; \
 644         for page in ${MAN_PAGES}; do \
 645           (cd $${thisdir}; \
 646            ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}; \
 647            chmod a+r $(DESTDIR)${man1dir}/$${page}; \
 648            if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 649              rm -f $(DESTDIR)${man1dir}/$${page}.gz; \
 650              ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \
 651            else true; fi ); \
 652         done
 653
 654 ## Install those items from etc/ that need to end up elsewhere.
 655 install-etc: mkdir
 656         ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
 657           $(DESTDIR)${desktopdir}/emacs.desktop
 658         for icon in $(iconsrcdir)/*/*/apps/*.* \
 659           $(iconsrcdir)/*/*/mimetypes/*.*; do \
 660           if [ -r $${icon} ]; then \
 661             iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
 662             ${INSTALL_DATA} $${icon} $${iicon} ; \
 663           fi ; \
 664         done
 665
 666 ### Install LEIM files.  Although they are machine-independent, we
 667 ### have separate target here instead of including it in
 668 ### `install-arch-indep'.  People who extracted LEIM files after they
 669 ### insalled Emacs itself can install only LEIM files by this target.
 670 install-leim: leim/Makefile mkdir
 671         cd leim; $(MAKE) install
 672
 673 ### Build Emacs and install it, stripping binaries while installing them.
 674 install-strip:
 675         $(MAKE) INSTALL_STRIP=-s install
 676
 677 ### Build all the directories we're going to install Emacs in.  Since
 678 ### we may be creating several layers of directories (for example,
 679 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use install-sh -d
 680 ### instead of mkdir.  Not all systems' mkdir programs have the `-p' flag.
 681 ### We set the umask so that any created directories are world-readable.
 682 ### FIXME it would be good to warn about non-standard permissions of
 683 ### pre-existing directories, but that does not seem easy.
 684 mkdir: FRC
 685         icondirs= ; \
 686         for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \
 687           if [ -d $${dir} ]; then \
 688             icondirs="$${icondirs} $${dir}" ; \
 689           fi ; \
 690         done ; \
 691         icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
 692         umask 022 ; \
 693         $(srcdir)/build-aux/install-sh -d $(DESTDIR)${datadir} ${COPYDESTS} \
 694           $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
 695           $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
 696           $(DESTDIR)${datadir}/emacs/site-lisp \
 697           $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
 698           $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
 699           $(DESTDIR)${desktopdir} $${icondirs}
 700
 701 ### Delete all the installed files that the `install' target would
 702 ### create (but not the noninstalled files such as `make all' would create).
 703 ###
 704 ### Don't delete the lisp and etc directories if they're in the source tree.
 705 uninstall:
 706         (cd lib-src;                                    \
 707          $(MAKE) $(MFLAGS) uninstall                    \
 708             prefix=${prefix} exec_prefix=${exec_prefix} \
 709             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
 710         -unset CDPATH; \
 711         for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do        \
 712           if [ -d $${dir} ]; then                       \
 713             case `(cd $${dir} ; /bin/pwd)` in           \
 714               `(cd ${srcdir} ; /bin/pwd)`* ) ;;         \
 715               * ) rm -rf $${dir} ;;                     \
 716             esac ;                                      \
 717             case $${dir} in                             \
 718               $(DESTDIR)${datadir}/emacs/${version}/* )         \
 719                 rm -rf $(DESTDIR)${datadir}/emacs/${version}    \
 720               ;;                                        \
 721             esac ;                                      \
 722           fi ;                                          \
 723         done
 724         -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
 725         (cd $(DESTDIR)${infodir} && \
 726           for elt in $(INFO_FILES); do \
 727             $(INSTALL_INFO) --remove --info-dir=. $$elt; \
 728             for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 729               rm -f $$f; \
 730             done; \
 731           done;)
 732         (cd $(DESTDIR)${man1dir}  && rm -f $(MAN_PAGES))
 733         (cd $(DESTDIR)${bindir}  && rm -f $(EMACSFULL) $(EMACS))
 734         (cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg )
 735         -rm -f $(DESTDIR)${desktopdir}/emacs.desktop
 736         for file in snake-scores tetris-scores; do \
 737           file=$(DESTDIR)${gamedir}/$${file}; \
 738           [ -s $${file} ] || rm -f $$file; \
 739         done
 740
 741 FRC:
 742
 743 # ==================== Cleaning up and miscellanea ====================
 744
 745 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
 746
 747 ### `mostlyclean'
 748 ###      Like `clean', but may refrain from deleting a few files that people
 749 ###      normally don't want to recompile.  For example, the `mostlyclean'
 750 ###      target for GCC does not delete `libgcc.a', because recompiling it
 751 ###      is rarely necessary and takes a lot of time.
 752 mostlyclean: FRC
 753         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 754         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 755         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 756         (cd lib;      $(MAKE) $(MFLAGS) mostlyclean)
 757         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 758         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) mostlyclean)
 759         -(cd doc/misc &&   $(MAKE) $(MFLAGS) mostlyclean)
 760         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) mostlyclean)
 761         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)
 762         (cd leim;     $(MAKE) $(MFLAGS) mostlyclean)
 763
 764 ### `clean'
 765 ###      Delete all files from the current directory that are normally
 766 ###      created by building the program.  Don't delete the files that
 767 ###      record the configuration.  Also preserve files that could be made
 768 ###      by building, but normally aren't because the distribution comes
 769 ###      with them.
 770 ###
 771 ###      Delete `.dvi' files here if they are not part of the distribution.
 772 clean: FRC
 773         (cd src;      $(MAKE) $(MFLAGS) clean)
 774         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 775         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 776         (cd lib;      $(MAKE) $(MFLAGS) clean)
 777         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 778         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 779         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 780         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 781         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 782         (cd leim;     $(MAKE) $(MFLAGS) clean)
 783
 784 ### `bootclean'
 785 ###      Delete all files that need to be remade for a clean bootstrap.
 786 top_bootclean=\
 787         rm -f config.cache config.log
 788 ### `distclean'
 789 ###      Delete all files from the current directory that are created by
 790 ###      configuring or building the program.  If you have unpacked the
 791 ###      source and built the program without creating any other files,
 792 ###      `make distclean' should leave only the files that were in the
 793 ###      distribution.
 794 top_distclean=\
 795         ${top_bootclean}; \
 796         rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
 797 distclean: FRC
 798         (cd src;      $(MAKE) $(MFLAGS) distclean)
 799         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 800         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 801         (cd lib;      $(MAKE) $(MFLAGS) distclean)
 802         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 803         (cd doc/emacs &&    $(MAKE) $(MFLAGS) distclean)
 804         (cd doc/misc &&    $(MAKE) $(MFLAGS) distclean)
 805         (cd doc/lispref &&    $(MAKE) $(MFLAGS) distclean)
 806         (cd doc/lispintro &&    $(MAKE) $(MFLAGS) distclean)
 807         (cd leim;     $(MAKE) $(MFLAGS) distclean)
 808         (cd lisp;     $(MAKE) $(MFLAGS) distclean)
 809         ${top_distclean}
 810
 811 ### `bootstrap-clean'
 812 ###      Delete everything that can be reconstructed by `make' and that
 813 ###      needs to be deleted in order to force a bootstrap from a clean state.
 814 bootstrap-clean: FRC
 815         (cd src;      $(MAKE) $(MFLAGS) bootstrap-clean)
 816         (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
 817         (cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)
 818         (cd lib;      $(MAKE) $(MFLAGS) maintainer-clean)
 819         (cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)
 820         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) maintainer-clean)
 821         -(cd doc/misc &&   $(MAKE) $(MFLAGS) maintainer-clean)
 822         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)
 823         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)
 824         (cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)
 825         (cd lisp;     $(MAKE) $(MFLAGS) bootstrap-clean)
 826         [ ! -f config.log ] || mv -f config.log config.log~
 827         ${top_bootclean}
 828 ## configure; make bootstrap replaces the real config.log from configure
 829 ## with the truncated one from config.status.  The former is more useful.
 830
 831 ### `maintainer-clean'
 832 ###      Delete everything from the current directory that can be
 833 ###      reconstructed with this Makefile.  This typically includes
 834 ###      everything deleted by distclean, plus more: C source files
 835 ###      produced by Bison, tags tables, info files, and so on.
 836 ###
 837 ###      One exception, however: `make maintainer-clean' should not delete
 838 ###      `configure' even if `configure' can be remade using a rule in the
 839 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 840 ###      anything that needs to exist in order to run `configure' and then
 841 ###      begin to build the program.
 842 top_maintainer_clean=\
 843         ${top_distclean}; \
 844         rm -fr autom4te.cache
 845 maintainer-clean: bootstrap-clean FRC
 846         (cd src;      $(MAKE) $(MFLAGS) maintainer-clean)
 847         (cd lisp;     $(MAKE) $(MFLAGS) maintainer-clean)
 848         ${top_maintainer_clean}
 849
 850 ### This doesn't actually appear in the coding standards, but Karl
 851 ### says GCC supports it, and that's where the configuration part of
 852 ### the coding standards seem to come from.  It's like distclean, but
 853 ### it deletes backup and autosave files too.
 854 extraclean:
 855         for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 856         ${top_maintainer_clean}
 857         -rm -f config-tmp-*
 858         -rm -f *~ \#*
 859
 860 # The src subdir knows how to do the right thing
 861 # even when the build directory and source dir are different.
 862 TAGS tags: lib lib-src src
 863         cd src; $(MAKE) $(MFLAGS) tags
 864
 865 check:
 866         @if test ! -d test/automated; then \
 867           echo "You do not seem to have the test/ directory."; \
 868           echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
 869         else \
 870           cd test/automated && $(MAKE) $(MFLAGS) check; \
 871         fi
 872
 873 dist:
 874         cd ${srcdir}; ./make-dist
 875
 876 .PHONY: info dvi dist check html
 877
 878 info-real:
 879         (cd doc/emacs; $(MAKE) $(MFLAGS) info)
 880         (cd doc/misc; $(MAKE) $(MFLAGS) info)
 881         (cd doc/lispref; $(MAKE) $(MFLAGS) info)
 882         (cd doc/lispintro; $(MAKE) $(MFLAGS) info)
 883
 884 force-info:
 885 # Note that man/Makefile knows how to put the info files in $(srcdir),
 886 # so we can do ok running make in the build dir.
 887 # This used to have a clause that exited with an error if MAKEINFO = no.
 888 # But it is inappropriate to do so without checking if makeinfo is
 889 # actually needed - it is not if the info files are up-to-date.  (Bug#3982)
 890 # Only the doc/*/Makefiles can decide that, so we let those rules run
 891 # and give a standard error if makeinfo is needed but missing.
 892 # While it would be nice to give a more detailed error message, that
 893 # would require changing every rule in doc/ that builds an info file,
 894 # and it's not worth it.  This case is only relevant if you download a
 895 # release, then change the .texi files.
 896 info: force-info
 897         @if test "$(HAVE_MAKEINFO)" = "no"; then \
 898           echo "Configured --without-makeinfo, not building manuals" ; \
 899         else \
 900           $(MAKE) $(MFLAGS) info-real ; \
 901         fi
 902
 903 # The info/dir file must be updated by hand when new manuals are added.
 904 check-info-dir: info
 905         cd info ; \
 906         missing= ; \
 907         for file in *; do \
 908           test -f "$${file}" || continue ; \
 909           case $${file} in \
 910             *-[0-9]*|COPYING|dir) continue ;; \
 911           esac ; \
 912           grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
 913         done ; \
 914         if test -n "$${missing}"; then \
 915           echo "Missing info/dir entries: $${missing}" ; \
 916           exit 1 ; \
 917         fi ; \
 918         echo "info/dir is OK"
 919
 920 dvi:
 921         (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
 922         (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
 923         (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
 924         (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
 925
 926 #### Bootstrapping.
 927
 928 ### This first cleans the lisp subdirectory, removing all compiled
 929 ### Lisp files.  Then re-run make to build all the files anew.
 930
 931 .PHONY: bootstrap
 932
 933 ## configure; make bootstrap replaces the real config.log from configure
 934 ## with the truncated one from config.status.  The former is more useful.
 935 bootstrap: bootstrap-clean FRC
 936         if [ -x ./config.status ]; then           \
 937             ./config.status;                      \
 938         else                                      \
 939             ./configure --enable-maintainer-mode; \
 940         fi
 941         $(MAKE) $(MFLAGS) info all
 942
 943 .PHONY: check-declare
 944
 945 check-declare:
 946         @if [ ! -f $(srcdir)/src/emacs ]; then \
 947           echo "You must build Emacs to use this command"; \
 948           exit 1; \
 949         fi
 950         (cd leim; $(MAKE) $(MFLAGS) $@)
 951         (cd lisp; $(MAKE) $(MFLAGS) $@)