(PATFETCH): Remove the translating fetch.

[emacs.git] / etc / vipcard.tex

% Quick Reference Card for VIP 3.5 under GNU Emacs version 18 on Unix systems
%**start of header
\newcount\columnsperpage

% This file can be printed with 1, 2, or 3 columns per page (see below).
% Specify how many you want here.  Nothing else needs to be changed.

\columnsperpage=1

% Copyright (c) 1987 Free Software Foundation, Inc.

% This file is part of GNU Emacs.

% This file is distributed in the hope that it will be useful,
% but WITHOUT ANY WARRANTY.  No author or distributor
% accepts responsibility to anyone for the consequences of using it
% or for whether it serves any particular purpose or describes
% any piece of software unless they say so in writing.  Refer to the
% GNU Emacs General Public License for full details.
%
% Permission is granted to copy, modify and redistribute this source
% file provided the copyright notice and permission notices are
% preserved on all copies.
%
% Permission is granted to process this file through TeX and print the
% results, provided the printed document carries copyright and
% permission notices identical to the ones below.

% This file is intended to be processed by plain TeX (TeX82).
%
% The final reference card has six columns, three on each side.
% This file can be used to produce it in any of three ways:
% 1 column per page
%    produces six separate pages, each of which needs to be reduced to 80%.
%    This gives the best resolution.
% 2 columns per page
%    produces three already-reduced pages.
%    You will still need to cut and paste.
% 3 columns per page
%    produces two pages which must be printed sideways to make a
%    ready-to-use 8.5 x 11 inch reference card.
%    For this you need a dvi device driver that can print sideways.
% Which mode to use is controlled by setting \columnsperpage above.
%
% Author:
%  Masahiko Sato
%  Internet: ms@sail.stanford.edu
%  Junet: masahiko@sato.riec.tohoku.junet
%
% The original TeX code for formatting the reference card was written by:
%  Stephen Gildea
%  UUCP: mit-erl!gildea
%  Internet: gildea@stop.mail-abuse.org


\def\versionnumber{1.2}
\def\year{1987}
\def\version{September \year\ v\versionnumber}

\def\shortcopyrightnotice{\vskip 1ex plus 2 fill
  \centerline{\small \copyright\ \year\ Free Software Foundation, Inc.
  Permissions on back.  v\versionnumber}}

\def\copyrightnotice{
%\vskip 1ex plus 2 fill\begingroup\small
\vskip 1ex \begingroup\small
\centerline{Copyright \copyright\ \year\ Free Software Foundation, Inc.}
\centerline{designed by Masahiko Sato, \version}
\centerline{for VIP 3.5 under GNU Emacs version 18 on Unix systems}

Permission is granted to make and distribute copies of
this card provided the copyright notice and this permission notice
are preserved on all copies.

For copies of the GNU Emacs manual, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

\endgroup}

% make \bye not \outer so that the \def\bye in the \else clause below
% can be scanned without complaint.
\def\bye{\par\vfill\supereject\end}

\newdimen\intercolumnskip
\newbox\columna
\newbox\columnb

\def\ncolumns{\the\columnsperpage}

\message{[\ncolumns\space 
  column\if 1\ncolumns\else s\fi\space per page]}

\def\scaledmag#1{ scaled \magstep #1}

% This multi-way format was designed by Stephen Gildea
% October 1986.
% Slightly modified by Masahiko Sato, September 1987.
\if 1\ncolumns
  \hsize 4in
  \vsize 10in
  %\voffset -.7in
  \voffset -.57in
  \font\titlefont=\fontname\tenbf \scaledmag3
  \font\headingfont=\fontname\tenbf \scaledmag2
  \font\miniheadingfont=\fontname\tenbf \scaledmag1 % masahiko
  \font\smallfont=\fontname\sevenrm
  \font\smallsy=\fontname\sevensy

  \footline{\hss\folio}
  \def\makefootline{\baselineskip10pt\hsize6.5in\line{\the\footline}}
\else
  %\hsize 3.2in
  %\vsize 7.95in
  \hsize 3.41in % masahiko
  \vsize 8in % masahiko
  \hoffset -.75in
  \voffset -.745in
  \font\titlefont=cmbx10 \scaledmag2
  \font\headingfont=cmbx10 \scaledmag1
  \font\miniheadingfont=cmbx10 % masahiko
  \font\smallfont=cmr6
  \font\smallsy=cmsy6
  \font\eightrm=cmr8
  \font\eightbf=cmbx8
  \font\eightit=cmti8
  \font\eightsl=cmsl8
  \font\eighttt=cmtt8
  \font\eightsy=cmsy8
  \textfont0=\eightrm
  \textfont2=\eightsy
  \def\rm{\eightrm}
  \def\bf{\eightbf}
  \def\it{\eightit}
  \def\sl{\eightsl} % masahiko
  \def\tt{\eighttt}
  \normalbaselineskip=.8\normalbaselineskip
  \normallineskip=.8\normallineskip
  \normallineskiplimit=.8\normallineskiplimit
  \normalbaselines\rm           %make definitions take effect

  \if 2\ncolumns
    \let\maxcolumn=b
    \footline{\hss\rm\folio\hss}
    \def\makefootline{\vskip 2in \hsize=6.86in\line{\the\footline}}
  \else \if 3\ncolumns
    \let\maxcolumn=c
    \nopagenumbers
  \else
    \errhelp{You must set \columnsperpage equal to 1, 2, or 3.}
    \errmessage{Illegal number of columns per page}
  \fi\fi

  %\intercolumnskip=.46in
  \intercolumnskip=.19in % masahiko .19x4 + 3.41x3 = 10.99
  \def\abc{a}
  \output={%
      % This next line is useful when designing the layout.
      %\immediate\write16{Column \folio\abc\space starts with \firstmark}
      \if \maxcolumn\abc \multicolumnformat \global\def\abc{a}
      \else\if a\abc
        \global\setbox\columna\columnbox \global\def\abc{b}
        %% in case we never use \columnb (two-column mode)
        \global\setbox\columnb\hbox to -\intercolumnskip{}
      \else
        \global\setbox\columnb\columnbox \global\def\abc{c}\fi\fi}
  \def\multicolumnformat{\shipout\vbox{\makeheadline
      \hbox{\box\columna\hskip\intercolumnskip
        \box\columnb\hskip\intercolumnskip\columnbox}
      \makefootline}\advancepageno}
  \def\columnbox{\leftline{\pagebody}}

  \def\bye{\par\vfill\supereject
    \if a\abc \else\null\vfill\eject\fi
    \if a\abc \else\null\vfill\eject\fi
    \end}  
\fi

% we won't be using math mode much, so redefine some of the characters
% we might want to talk about
\catcode`\^=12
\catcode`\_=12

\chardef\\=`\\
\chardef\{=`\{
\chardef\}=`\}

\hyphenation{mini-buf-fer}

\parindent 0pt
\parskip 1ex plus .5ex minus .5ex

\def\small{\smallfont\textfont2=\smallsy\baselineskip=.8\baselineskip}

\outer\def\newcolumn{\vfill\eject}

\outer\def\title#1{{\titlefont\centerline{#1}}\vskip 1ex plus .5ex}

\outer\def\section#1{\par\filbreak
  \vskip 3ex plus 2ex minus 2ex {\headingfont #1}\mark{#1}%
  \vskip 2ex plus 1ex minus 1.5ex}

% masahiko
\outer\def\subsection#1{\par\filbreak
  \vskip 2ex plus 2ex minus 2ex {\miniheadingfont #1}\mark{#1}%
  \vskip 1ex plus 1ex minus 1.5ex}

\newdimen\keyindent

\def\beginindentedkeys{\keyindent=1em}
\def\endindentedkeys{\keyindent=0em}
\endindentedkeys

\def\paralign{\vskip\parskip\halign}

\def\<#1>{$\langle${\rm #1}$\rangle$}

\def\kbd#1{{\tt#1}\null}        %\null so not an abbrev even if period follows

\def\beginexample{\par\leavevmode\begingroup
  \obeylines\obeyspaces\parskip0pt\tt}
{\obeyspaces\global\let =\ }
\def\endexample{\endgroup}

\def\key#1#2{\leavevmode\hbox to \hsize{\vtop
  {\hsize=.75\hsize\rightskip=1em
  \hskip\keyindent\relax#1}\kbd{#2}\hfil}}

\newbox\metaxbox
\setbox\metaxbox\hbox{\kbd{M-x }}
\newdimen\metaxwidth
\metaxwidth=\wd\metaxbox

\def\metax#1#2{\leavevmode\hbox to \hsize{\hbox to .75\hsize
  {\hskip\keyindent\relax#1\hfil}%
  \hskip -\metaxwidth minus 1fil
  \kbd{#2}\hfil}}

\def\fivecol#1#2#3#4#5{\hskip\keyindent\relax#1\hfil&\kbd{#2}\quad
  &\kbd{#3}\quad&\kbd{#4}\quad&\kbd{#5}\cr}

\def\fourcol#1#2#3#4{\hskip\keyindent\relax#1\hfil&\kbd{#2}\quad
  &\kbd{#3}\quad&\kbd{#4}\quad\cr}

\def\threecol#1#2#3{\hskip\keyindent\relax#1\hfil&\kbd{#2}\quad
  &\kbd{#3}\quad\cr}

\def\twocol#1#2{\hskip\keyindent\relax\kbd{#1}\hfil&\kbd{#2}\quad\cr}

\def\twocolkey#1#2#3#4{\hskip\keyindent\relax#1\hfil&\kbd{#2}\quad&\relax#3\hfil&\kbd{#4}\quad\cr}

%**end of header
\f
\beginindentedkeys

\title{VIP Quick Reference Card}

\centerline{(for version 3.5 under GNU Emacs version 18)}

%\copyrightnotice

\section{Loading VIP}

Just type \kbd{M-x vip-mode} followed by \kbd{RET}

\section{VIP Modes}

VIP has three modes: {\it emacs mode}, {\it vi mode} and {\it insert mode}.
Mode line tells you which mode you are in.
In emacs mode you can do all the normal GNU Emacs editing.
This card explains only vi mode and insert mode.
{\bf GNU Emacs Reference Card} explains emacs mode.
You can switch modes as follows.

\key{from emacs mode to vi mode}{C-z}
\key{from vi mode to emacs mode}{C-z}
\metax{from vi mode to insert mode}{i, I, a, A, o, O {\rm or} C-o}
\key{from insert mode to vi mode}{ESC}

If you wish to be in vi mode just after you startup Emacs,
include the line:

\hskip 5ex
\kbd{(setq term-setup-hook 'vip-mode)}

in your \kbd{.emacs} file.
Or, you can put the following alias in your \kbd{.cshrc} file.

\hskip 5ex
\kbd{alias vip 'emacs \\!* -f vip-mode'}


\section{Insert Mode}
Insert mode is like emacs mode except for the following.

\key{go back to vi mode}{ESC}
\key{delete previous character}{C-h}
\key{delete previous word}{C-w}
\key{emulate \kbd{ESC} key in emacs mode}{C-z}

The rest of this card explains commands in {\bf vi mode}.

\section{Getting Information on VIP}

Execute info command by typing \kbd{M-x info} and select menu item
\kbd{vip}.  Also:

\key{describe function attached to the key {\it x}}{C-h k {\it x}}

\section{Leaving Emacs}

\key{suspend Emacs}{X Z {\rm or} :st}
\metax{exit Emacs permanently}{Z Z {\rm or} X C {\rm or} :q}

\section{Error Recovery}

\key{abort partially typed or executing command}{C-g}
\key{redraw messed up screen}{C-l}
\metax{{\bf recover} a file lost by a system crash}{M-x recover-file}
\metax{restore a buffer to its original contents}{M-x revert-buffer}

\shortcopyrightnotice

\section{Counts}

Most commands in vi mode accept a {\it count} which can be supplied as a
prefix to the commands.  In most cases, if a count is given, the
command is executed that many times.  E.g., \kbd{5 d d} deletes 5
lines.

%\shortcopyrightnotice
\section{Registers}

There are 26 registers (\kbd{a} to \kbd{z}) that can store texts
and marks.
You can append a text at the end of a register (say \kbd{x}) by
specifying the register name in capital letter (say \kbd{X}).
There are also 9 read only registers (\kbd{1} to \kbd{9}) that store
up to 9 previous changes.
We will use {\it x\/} to denote a register.
\section{Entering Insert Mode}

\key{{\bf insert} at point}{i}
\key{{\bf append} after cursor}{a}
\key{{\bf insert} before first non-white}{I}
\key{{\bf append} at end of line}{A}
\key{{\bf open} line below}{o}
\key{{\bf open} line above}{O}
\key{{\bf open} line at point}{C-o}

\section{Buffers and Windows}

\key{move cursor to {\bf next} window}{C-n}
\key{delete current window}{X 0}
\key{delete other windows}{X 1}
\key{split current window into two windows}{X 2}
\key{show current buffer in two windows}{X 3}
\key{{\bf switch} to a buffer in the current window}{s {\sl buffer}}
\key{{\bf switch} to a buffer in another window}{S {\sl buffer}}
\key{{\bf kill} a buffer}{K}
\key{list existing {\bf buffers}}{X B}

\section{Files}

\metax{{\bf visit} file in the current window}{v {\sl file} {\rm or} :e {\sl file}}
\key{{\bf visit} file in another window}{V {\sl file}}
\key{{\bf save} buffer to the associated file}{X S}
\key{{\bf write} buffer to a specified file}{X W}
\key{{\bf insert} a specified file at point}{X I}
\key{{\bf get} information on the current {\bf file}}{g {\rm or} :f}
\key{run the {\bf directory} editor}{X d}

\section{Viewing the Buffer}

\key{scroll to next screen}{SPC {\rm or} C-f}
\key{scroll to previous screen}{RET {\rm or} C-b}
\key{scroll {\bf down} half screen}{C-d}
\key{scroll {\bf up} half screen}{C-u}
\key{scroll down one line}{C-e}
\key{scroll up one line}{C-y}

\key{put current line on the {\bf home} line}{z H {\rm or} z RET}
\key{put current line on the {\bf middle} line}{z M {\rm or} z .}
\key{put current line on the {\bf last} line}{z L {\rm or} z -}

\section{Marking and Returning}

\key{{\bf mark} point in register {\it x}}{m {\it x}}
\key{set mark at buffer beginning}{m <}
\key{set mark at buffer end}{m >}
\key{set mark at point}{m .}
\key{jump to mark}{m ,}
\key{exchange point and mark}{` `}
\key{... and skip to first non-white on line}{' '}
\key{go to mark {\it x}}{` {\it x}}
\key{... and skip to first non-white on line}{' {\it x}}

\section{Macros}

\key{start remembering keyboard macro}{X (}
\key{finish remembering keyboard macro}{X )}
\key{call last keyboard macro}{*}
\key{execute macro stored in register {\it x}}{@ {\it x}}

\section{Motion Commands}

\key{go backward one character}{h}
\key{go forward one character}{l}
\key{next line keeping the column}{j}
\key{previous line keeping the column}{k}
\key{next line at first non-white}{+}
\key{previous line at first non-white}{-}

\key{beginning of line}{0}
\key{first non-white on line}{^}
\key{end of line}{\$}
\key{go to {\it n}-th column on line}{{\it n} |}

\key{go to {\it n}-th line}{{\it n} G}
\key{go to last line}{G}
\key{find matching parenthesis for \kbd{()}, \kbd{\{\}} and \kbd{[]}}{\%}

\key{go to {\bf home} window line}{H}
\key{go to {\bf middle} window line}{M}
\key{go to {\bf last} window line}{L}

\subsection{Words, Sentences, Paragraphs}

\key{forward {\bf word}}{w {\rm or} W}
\key{{\bf backward} word}{b {\rm or} B}
\key{{\bf end} of word}{e {\rm or} E}

In the case of capital letter commands, a word is delimited by a
non-white character.

\key{forward sentence}{)}
\key{backward sentence}{(}

\key{forward paragraph}{\}}
\key{backward paragraph}{\{}

\subsection{Find Characters on the Line}

\key{{\bf find} {\it c} forward on line}{f {\it c}}
\key{{\bf find} {\it c} backward on line}{F {\it c}}
\key{up {\bf to} {\it c} forward on line}{t {\it c}}
\key{up {\bf to} {\it c} backward on line}{T {\it c}}
\key{repeat previous \kbd{f}, \kbd{F}, \kbd{t} or \kbd{T}}{;}
\key{... in the opposite direction}{,}

\newcolumn
\title{VIP Quick Reference Card}

\section{Searching and Replacing}

\key{search forward for {\sl pat}}{/ {\sl pat}}
\key{search backward for {\sl pat}}{?\ {\sl pat}}
\key{repeat previous search}{n}
\key{... in the opposite direction}{N}

\key{incremental {\bf search}}{C-s}
\key{{\bf reverse} incremental search}{C-r}

\key{{\bf replace}}{R}
\key{{\bf query} replace}{Q}
\key{{\bf replace} a character by another character {\it c}}{r {\it c}}

\section{Modifying Commands}

The delete (yank, change) commands explained below accept a motion command as
their argument and delete (yank, change) the region determined by the motion
command.  Motion commands are classified into {\it point commands} and
{\it line commands}.  In the case of line commands, whole lines will
be affected by the command.  Motion commands will be represented by
{\it m} below.

The point commands are as follows:

\hskip 5ex
\kbd{h l 0 ^ \$ w W b B e E ( ) / ?\ ` f F t T \% ; ,}

The line commands are as follows:

\hskip 5ex
\kbd{j k + - H M L \{ \} G '}

\subsection{Delete/Yank/Change Commands}

\paralign to \hsize{#\tabskip=10pt plus 1 fil&#\tabskip=0pt&#\tabskip=0pt&#\cr
\fourcol{}{{\bf delete}}{{\bf yank}}{{\bf change}}
\fourcol{region determined by {\it m}}{d {\it m}}{y {\it m}}{c {\it m}}
\fourcol{... into register {\it x}}{" {\it x\/} d {\it m}}{" {\it x\/} y {\it m}}{" {\it x\/} c {\it m}}
\fourcol{a line}{d d}{Y {\rm or} y y}{c c}
\fourcol{current {\bf region}}{d r}{y r}{c r}
\fourcol{expanded {\bf region}}{d R}{y R}{c R}
\fourcol{to end of line}{D}{y \$}{c \$}
\fourcol{a character after point}{x}{y l}{c l}
\fourcol{a character before point}{DEL}{y h}{c h}
}

\subsection{Put Back Commands}

Deleted/yanked/changed text can be put back by the following commands.

\key{{\bf Put} back at point/above line}{P}
\key{... from register {\it x}}{" {\it x\/} P}
\key{{\bf put} back after point/below line}{p}
\key{... from register {\it x}}{" {\it x\/} p}

\subsection{Repeating and Undoing Modifications}

\key{{\bf undo} last change}{u {\rm or} :und}
\key{repeat last change}{.\ {\rm (dot)}}

Undo is undoable by \kbd{u} and repeatable by \kbd{.}.
For example, \kbd{u...} will undo 4 previous changes.
A \kbd{.} after \kbd{5dd} is equivalent to \kbd{5dd},
while \kbd{3.} after \kbd{5dd} is equivalent to \kbd{3dd}.

\section{Miscellaneous Commands}

\endindentedkeys

\paralign to \hsize{#\tabskip=5pt plus 1 fil&#\tabskip=0pt&#\tabskip=0pt&#\tabskip=0pt&#\cr
\fivecol{}{{\bf shift left}}{{\bf shift right}}{{\bf filter shell command}}{{\bf indent}}
\fivecol{region}{< {\it m}}{> {\it m}}{!\ {\it m\/} {\sl shell-com}}{= {\it m}}
\fivecol{line}{< <}{> >}{!\ !\ {\sl shell-com}}{= =}
}

\key{emulate \kbd{ESC}/\kbd{C-h} in emacs mode}{ESC{\rm /}C-h}
\key{emulate \kbd{C-c}/\kbd{C-x} in emacs mode}{C{\rm /}X}

\key{{\bf join} lines}{J}

\key{lowercase region}{\# c {\it m}}
\key{uppercase region}{\# C {\it m}}
\key{execute last keyboard macro on each line in the region}{\# g {\it m}}

\key{insert specified string for each line in the region}{\# q {\it m}}
\key{check spelling of the words in the region}{\# s {\it m}}

\section{Differences from Vi}

\beginindentedkeys

In VIP some keys behave rather differently from Vi.
The table below lists such keys, and you can get the effect of typing
these keys by typing the corresponding keys in the VIP column.

\paralign to \hsize{#\tabskip=10pt plus 1 fil&#\tabskip=0pt&#\cr
\threecol{}{{\bf Vi}}{{\bf VIP}}
\threecol{forward character}{SPC}{l}
\threecol{backward character}{C-h}{h}
\threecol{next line at first non-white}{RET}{+}
\threecol{delete previous character}{X}{DEL}
\threecol{get information on file}{C-g}{g}
\threecol{substitute characters}{s}{x i}
\threecol{substitute line}{S}{c c}
\threecol{change to end of line}{C {\rm or} R}{c \$}
}

(Strictly speaking, \kbd{C} and \kbd{R} behave slightly differently in Vi.)

\section{Customization}

By default, search is case sensitive.
You can change this by including the following line in your \kbd{.vip} file.

\hskip 5ex
\kbd{(setq vip-case-fold-search t)}

\beginindentedkeys

\paralign to \hsize{#\tabskip=10pt plus 1 fil&#\tabskip=0pt&#\cr
\twocol{{\bf variable}}{{\bf default value}}
\twocol{vip-search-wrap-around}{t}
\twocol{vip-case-fold-search}{nil}
\twocol{vip-re-search}{nil}
\twocol{vip-re-replace}{nil}
\twocol{vip-re-query-replace}{nil}
\twocol{vip-open-with-indent}{nil}
\twocol{vip-help-in-insert-mode}{nil}
\twocol{vip-shift-width}{8}
\twocol{vip-tags-file-name}{"TAGS"}
}

%\subsection{Customizing Key Bindings}

Include (some of) following lines in your \kbd{.vip} file
to restore Vi key bindings.

\beginexample
(define-key vip-mode-map "\\C-g" 'vip-info-on-file)
(define-key vip-mode-map "\\C-h" 'vip-backward-char)
(define-key vip-mode-map "\\C-m" 'vip-next-line-at-bol)
(define-key vip-mode-map " " 'vip-forward-char)
(define-key vip-mode-map "g" 'vip-keyboard-quit)
(define-key vip-mode-map "s" 'vip-substitute)
(define-key vip-mode-map "C" 'vip-change-to-eol)
(define-key vip-mode-map "R" 'vip-change-to-eol)
(define-key vip-mode-map "S" 'vip-substitute-line)
(define-key vip-mode-map "X" 'vip-delete-backward-char)
\endexample

\newcolumn

\title{Ex Commands in VIP}

In vi mode, an Ex command is entered by typing:

\hskip 5ex
\kbd{:\ {\sl ex-command} RET}

\section{Ex Addresses}

\paralign to \hsize{#\tabskip=5pt plus 1 fil&#\tabskip=2pt&#\tabskip=5pt plus 1 fil&#\cr
\twocolkey{current line}{.}{next line with {\sl pat}}{/ {\sl pat} /}
\twocolkey{line {\it n}}{{\it n}}{previous line with {\sl pat}}{?\ {\sl pat} ?}
\twocolkey{last line}{\$}{{\it n\/} line before {\it a}}{{\it a} - {\it n}}
\twocolkey{next line}{+}{{\it a\/} through {\it b}}{{\it a\/} , {\it b}}
\twocolkey{previous line}{-}{line marked with {\it x}}{' {\it x}}
\twocolkey{entire buffer}{\%}{previous context}{' '}
}

Addresses can be specified in front of a command.
For example,

\hskip 5ex
\kbd{:.,.+10m\$}

moves 11 lines below current line to the end of buffer.

\section{Ex Commands}

\endindentedkeys

\key{mark lines matching {\sl pat} and execute {\sl cmds} on these lines}{:g /{\sl pat}/ {\sl cmds}}

\key{mark lines {\it not\/} matching {\sl pat} and execute {\sl cmds} on these lines}{:v /{\sl pat}/ {\sl cmds}}


\key{{\bf move} specified lines after {\sl addr}}{:m {\sl addr}}
\key{{\bf copy} specified lines after {\sl addr}}{:co\rm\ (or \kbd{:t})\ \sl addr}
\key{{\bf delete} specified lines [into register {\it x\/}]}{:d {\rm [{\it x\/}]}}
\key{{\bf yank} specified lines [into register {\it x\/}]}{:y {\rm [{\it x\/}]}}
\key{{\bf put} back text [from register {\it x\/}]}{:pu {\rm [{\it x\/}]}}

\key{{\bf substitute} {\sl repl} for first string on line matching {\sl pat}}{:s /{\sl pat}/{\sl repl}/}

\key{repeat last substitution}{:\&}
\key{repeat previous substitute with previous search pattern as {\sl pat}}{:\~{}}

\key{{\bf read} in a file}{:r {\sl file}}
\key{{\bf read} in the output of a shell command}{:r!\ {\sl command}}
\key{write out specified lines into {\sl file}}{:w {\sl file}}
\key{write out specified lines at the end of {\sl file}}{:w>> {\sl file}}
\key{write out and then quit}{:wq {\sl file}}

\key{define a macro {\it x} that expands to {\sl cmd}}{:map {\it x} {\sl cmd}}
\key{remove macro expansion associated with {\it x}}{:unma {\it x}}

\key{print line number}{:=}
\key{print {\bf version} number of VIP}{:ve}

\key{shift specified lines to the right}{:>}
\key{shift specified lines to the left}{:<}

\key{{\bf join} lines}{:j}
\key{mark specified line to register {\it x}}{:k {\it x}}
\key{{\bf set} a variable's value}{:se}
\key{run a sub{\bf shell} in a window}{:sh}
\key{execute shell command {\sl command}}{:!\ {\sl command}}
\key{find first definition of {\bf tag} {\sl tag}}{:ta {\sl tag}}


\copyrightnotice

\bye
\f
% Local variables:
% compile-command: "tex refcard"
% End: