1 2001-11-29 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
3 * make-dist: Add COPYING to the top-level directory of the
4 distribution. Simplify the logic behind copying.
6 * Makefile.in (maybe_bootstrap): Fix previous change.
8 2001-11-28 Richard M. Stallman <rms@gnu.org>
10 * Makefile.in (maybe_bootstrap): Don't bootstrap, just suggest it.
12 2001-11-26 Richard M. Stallman <rms@gnu.org>
14 * Makefile.in: bootstrap should not delete dumped executables.
15 (bootstrap-clean-before): New target.
16 (bootstrap): Use bootstrap-clean-before instead of clean.
17 (bootstrap-clean-after): Renamed from bootstrap-clean. Calls changed.
19 2001-11-24 Eli Zaretskii <eliz@is.elta.co.il>
21 These changes add the Emacs Lisp Introduction manual to the
24 * Makefile.in (install-arch-indep, uninstall): Add ELisp Intro
27 * make-dist: Copy the files in lispintro directory.
29 * config.bat: Configure in the lispintro directory.
31 * configure.in (AC_OUTPUT): Add lispintro/Makefile.
33 * configure: Regenerated.
35 * Makefile.in (SUBDIR_MAKEFILES): Add lispintro.
36 (lispintro/Makefile): New target.
37 (mostlyclean, clean, distclean, maintainer-clean): Add lispintro.
38 (unlock, relock, info, dvi): Ditto.
40 2001-11-23 Eli Zaretskii <eliz@is.elta.co.il>
42 * Makefile.in (uninstall, install-arch-indep): Don't install
45 * make-dist (etc): Don't distribute gfdl.1.
47 2001-11-22 Colin Walters <walters@debian.org>
49 * Makefile.in (install-arch-indep): Install the calc .info files.
50 (uninstall): Handle deletion of calc .info files (thanks Pavel
53 2001-11-17 Eli Zaretskii <eliz@is.elta.co.il>
55 * make-dist (lispref): Add *.txt, *.el, permute-index, and
56 tindex.pl to the list of those being put into the distribution.
58 2001-11-16 Eli Zaretskii <eliz@gnu.org>
60 * configure.in: Add coff.h to the list in AC_CHECK_HEADERS.
62 * configure: Regenerated.
64 2001-11-15 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
66 * Makefile.in (uninstall): Fix previous change.
68 * configure: Regenerated.
70 * configure.in, Makefile.in: Add support for --program-prefix,
71 --program-suffix and --program-transform-name options.
73 2001-11-13 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
75 * Makefile.in (install-arch-indep): Use `${manext}' instead of
77 (install-arch-indep): Install emacsclient manual page.
78 (uninstall): Uninstall emacsclient manual page.
80 2001-11-12 Eli Zaretskii <eliz@is.elta.co.il>
82 * make-dist: Add lispref/index.*perm files to the distribution.
83 From Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>.
85 2001-11-12 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
87 * Makefile.in (uninstall): Remove gfdl.1 when uninstalling.
89 2001-11-10 Eli Zaretskii <eliz@is.elta.co.il>
91 * configure.in: AC_OUTPUT lispref/Makefile.
93 * configure: Regenerated.
95 2001-11-10 Eli Zaretskii <eliz@is.elta.co.il>
97 The following changes add the ELisp reference manual to the
100 * make-dist: Add the lispref directory to the distribution.
102 * Makefile.in (install-arch-indep): Add elisp* to the list of
103 installed Info files.
104 (SUBDIR_MAKEFILES): Add lispref/Makefile.
105 (lispref/Makefile): New target.
106 (mostlyclean, clean, distclean, maintainer-clean, unlock, relock):
107 Add commands for the lispref directory.
110 * config.bat: Configure in `lispref'.
112 2001-11-09 Richard M. Stallman <rms@gnu.org>
114 * Makefile.in (bootstrap-lisp): Don't suppress error messages.
116 2001-11-07 Eli Zaretskii <eliz@is.elta.co.il>
118 * AUTHORS: Regenerate.
120 * make-dist (tempdir): Copy AUTHORS as well.
122 2001-11-06 Sam Steingold <sds@gnu.org>
124 * configure.in: Added a check for <nlist.h>
125 * configure: Regenerated.
127 2001-11-02 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
129 * configure: Regenerated.
131 2001-11-01 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
133 * configure.in: Reindent --help output.
134 From Per Starback (starback@ling.uu.se).
136 2001-10-31 Eli Zaretskii <eliz@is.elta.co.il>
138 * configure.in: New entry for HP/UX-11.
140 * Makefile.in (SOURCES): Replace GETTING.GNU.SOFTWARE with FTP.
141 From Eric S. Raymond <esr@golux.thyrsus.com>.
143 2001-10-28 Eli Zaretskii <eliz@is.elta.co.il>
145 * configure.in (s390-*-linux-gnu): New system. From Adam Thornton
146 <athornton@sinenomine.net>.
148 2001-10-25 Gerd Moellmann <gerd@gnu.org>
150 * Makefile.in (maybe_bootstrap): New target.
151 (all): Add to prerequisites to bootstrap if abbrev.elc doesn't
154 2001-10-24 Ken Raeburn <raeburn@gnu.org>
156 * configure.in: If --with-hesiod is given, look for
157 hes_getmailhost and res_send or __res_send; check hesiod and
158 resolv libraries respectively if system libraries don't supply
161 2001-10-24 Gerd Moellmann <gerd@gnu.org>
163 * configure.in: Use $MAKE for `make' if set.
165 2001-10-22 Gerd Moellmann <gerd@gnu.org>
167 * Makefile.in (install-arch-indep): Add -h (follow symlinks)
170 2001-10-20 Gerd Moellmann <gerd@gnu.org>
172 * (Version 21.1 released).
174 2001-10-20 Miles Bader <miles@gnu.org>
176 * configure.in (configuration): Set from `host' if `host_alias'
179 2001-10-19 Andreas Schwab <schwab@suse.de>
181 * configure.in: Make ready for autoconf 2.5x.
182 (AC_PREREQ): Require autoconf 2.50.
183 * aclocal.m4: Removed.
184 * configure: Regenerated.
185 * Makefile.in (${srcdir}/configure): Don't depend on aclocal.m4.
187 2001-10-13 Eli Zaretskii <eliz@is.elta.co.il>
189 * README: Bump Emacs version to 21.1.50.
191 2001-10-05 Gerd Moellmann <gerd@gnu.org>
195 2001-09-05 Gerd Moellmann <gerd@gnu.org>
197 * configure.in: Avoid `$@' which is handled specially in
198 Autoconf 2.52. From "Adam J. Richter" <adam@yggdrasil.com>.
200 2001-09-01 Eli Zaretskii <eliz@is.elta.co.il>
202 * make-dist (nt): Add subdirs.el to the list of distributed files.
204 2001-08-14 Eli Zaretskii <eliz@is.elta.co.il>
206 * configure.in (machine): Add an entry for
207 hppa1.1-hitachi-hiuxwe2*.
209 2001-05-28 Gerd Moellmann <gerd@gnu.org>
211 * make-dist (LANG): Set LC_ALL and LANGUAGE to C, unset
212 LC_MESSAGES and LANG. From Karl Eichwalder <keichwa@gmx.net>.
214 2001-05-14 Gerd Moellmann <gerd@gnu.org>
216 * make-dist: Copy texinfo.tex unconditionally.
218 2001-04-25 Eli Zaretskii <eliz@is.elta.co.il>
220 * Makefile.in (install-arch-indep): Add gfdl.1 to the man pages
223 2001-04-06 Gerd Moellmann <gerd@gnu.org>
225 * make-dist: Copy only `[a-z]*.{el,elc}' from leim/quail.
226 Don't copy quick-b5, quick-cns, tsang-b5, and tsang-cns files.
228 * make-dist: Handle leim/MISC-DIC. Only include
229 `[a-zA-Z]*.{el,elc}' from leim/quail.
231 2001-04-05 Gerd Moellmann <gerd@gnu.org>
233 * Makefile.in (install-arch-indep): Remove .cvsignore files.
235 2001-03-30 Gerd Moellmann <gerd@gnu.org>
237 * Makefile.in (.PHONY): Add for bootstrap targets.
238 (bootstrap-clean): New target.
239 (bootstrap): Use it instead of `clean'.
241 2001-03-29 Eli Zaretskii <a34785@is.elta.co.il>
243 * Makefile.in (SUBDIR): Remove leim.
244 (all, .RECURSIVE, extraclean): Add leim explicitly.
245 (leim): Provide separate rule which exports PARALLEL=0 into the
248 2001-03-20 Gerd Moellmann <gerd@gnu.org>
250 * configure.in (HAVE_XPM): Don't print the result of the check for
251 XpmReturnAllocPixels if we don't have an xpm.h.
253 2001-03-05 Gerd Moellmann <gerd@gnu.org>
257 2001-03-04 Eli Zaretskii <eliz@is.elta.co.il>
259 * config.bat: Update the copyright.
261 2001-02-23 Kenichi Handa <handa@etl.go.jp>
263 * configure.in: Use AC_EGREP_CPP to check if the C preprocessor
264 converts `..' to `. .'. If it converts, set CPP_NEED_TRADITIONAL
265 to `yes'. Later in AC_OUTPUT, check this variable.
267 2001-02-09 Dave Love <fx@gnu.org>
271 2001-02-06 Eli Zaretskii <eliz@is.elta.co.il>
273 * info/dir (Ebrowse): Fix the entry (was missing a dot).
275 2001-02-02 Gerd Moellmann <gerd@gnu.org>
277 * mkinstalldirs (errstatus): Chmod a+rx directories we create.
279 * Makefile.in (uninstall): Ignore exit code of `rm'.
281 * Makefile.in (uninstall): Remove more info files. Remove
282 ${libexecdir}/emacs/${version}. Remove ${archlibdir}/fns-*.
284 2001-01-31 Gerd Moellmann <gerd@gnu.org>
286 * noleim-Makefile.in (extraclean): Add.
288 2001-01-28 Gerd Moellmann <gerd@gnu.org>
290 * Makefile.in (extraclean): Added -f to -rm config-tmp-* to keep
293 2001-01-24 Colin Walters <walters@cis.ohio-state.edu>
295 * Makefile.in (tags): Fix typo.
297 2001-01-13 Kenichi Handa <handa@etl.go.jp>
299 * configure.in: Fix typo in the code setting x_search_path.
301 2001-01-10 Dave Love <fx@gnu.org>
303 * configure.in: Don't reset LIBS at end of -lXmu test. Test for
305 (HAVE_XKBGETKEYBOARD): Fix reporting of result.
306 (HAVE_LIBXP): Remove -lXt from AC_CHECK_LIB.
307 (HAVE_XAW3D, HAVE_XPM, HAVE_JPEG, HAVE_PNG, HAVE_TIFF, HAVE_GIF):
308 Don't frob CFLAGS. Remove extra X libs from AC_CHECK_LIB
311 2001-01-08 Eli Zaretskii <eliz@is.elta.co.il>
313 * config.bat: Run the preprocessor with -traditional.
315 2001-01-01 Eli Zaretskii <eliz@is.elta.co.il>
317 * INSTALL: Move copying conditions to end of file.
319 2000-12-27 Eli Zaretskii <eliz@is.elta.co.il>
321 * INSTALL: Add basic installation procedure which assumes
322 `configure' does its job. Elaborate on image support libraries.
323 Add a pointer to Xaw3d library. Add advice about solving
324 configure-time problems by looking in config.log and setting
325 variables in the environment.
327 2000-12-27 Gerd Moellmann <gerd@gnu.org>
329 * Makefile.in (install-arch-indep): If tar fails, exit with
332 2000-12-19 Gerd Moellmann <gerd@gnu.org>
334 * configure.in: Test for XkbGetKeyboard with an AC_TRY_LINK whose
335 source file includes XKBlib.h. On some broken Solaris systems,
336 there is an XKBlib.h, reportedly, but header files included by
337 XKBlib.h are missing.
339 2000-12-14 Gerd Moellmann <gerd@gnu.org>
341 * configure.in: AC_CHECK_FUNC XkbGetKeyboard.
343 2000-12-11 Dave Love <fx@gnu.org>
345 * configure.in <alpha*-dec-osf*>: Use full path for NON_GNU_CPP.
347 2000-12-11 Paul Eggert <eggert@twinsun.com>
349 * aclocal.m4 (AC_SYS_LARGEFILE, AC_SYS_LARGEFILE_MACRO_VALUE):
350 Merge fixes from latest GNU tar version. These macros no longer
351 futz with _XOPEN_SOURCE, as that was not portable in practice.
352 (AC_FUNC_FSEEKO): New macro.
354 * configure.in: Use it instead of invoking AC_CHECK_FUNCS on
357 2000-12-05 Dave Love <fx@gnu.org>
359 * Makefile.in (TAGS, info): Avoid tab-prefixed comments in rules.
361 2000-12-02 Eli Zaretskii <eliz@is.elta.co.il>
363 * info/dir: Change the category to "Emacs".
365 2000-12-01 Gerd Moellmann <gerd@gnu.org>
367 * make-dist (tempdir): Remove epaths.h from the distribution
370 2000-11-23 Eli Zaretskii <eliz@is.elta.co.il>
372 * config.bat: Check for existence of djecho.exe, and print an
373 error message if it is not available.
375 * INSTALL: Describe possible problem with djecho.exe in old
376 versions of DJGPP v2.x.
378 2000-11-23 Gerd Moellmann <gerd@gnu.org>
380 * configure.in: Initialize HAVE_LIBXP to no.
382 2000-11-22 Gerd Moellmann <gerd@gnu.org>
384 * configure.in: Use m/macppc.h instead of the non-existent
387 2000-11-21 Gerd Moellmann <gerd@gnu.org>
389 * Makefile.in (install-arch-indep): Also install info/eshell*
392 * configure.in (HAVE_PNG): Check for the presence of
393 png_get_channels to rule out older PNG libs.
395 * configure.in (AC_OUTPUT): Arrange to emit definitions of
396 GCC and NON_GNU_CPP into config.status.
398 2000-11-20 Dave Love <fx@gnu.org>
400 * configure.in: Fix last change.
402 * GETTING.GNU.SOFTWARE: Deleted.
403 * FTP: New file to replace it.
404 * make-dist: Add FTP, remove GETTING.GNU.SOFTWARE.
406 2000-11-20 Gerd Moellmann <gerd@gnu.org>
408 * configure.in: Use -traditional with GNU cpp.
410 2000-11-17 Gerd Moellmann <gerd@gnu.org>
412 * make-dist: Handle the Mac port. Distribute all makefile.w32-in.
413 Distribute more files from the nt/ subdir. Distribute PBM
414 image files from subdirs of lisp/. Distribute old change logs
415 from subdirs of lisp/. Distribute play/5x5.el.
417 2000-11-11 Dave Love <fx@gnu.org>
419 * config.sub, config.guess: Updated from master source.
421 2000-11-07 Dave Love <fx@gnu.org>
423 * configure.in: Test for mkstemp.
425 2000-11-01 Eli Zaretskii <eliz@is.elta.co.il>
427 * info/dir (Top): Rearrange menu items more logically, and put
428 them into a single category. Add menu items for RefTeX and
431 2000-10-29 Kai Gro
\e,A_
\e(Bjohann <Kai.Grossjohann@CS.Uni-Dortmund.DE>
433 * Makefile.in (install-arch-indep): Use --info-dir instead of
434 --dir-file, and a simple argument instead of --info-file, so that
435 the Debian version of install-info also works.
437 2000-10-19 Eric M. Ludlam <zappo@ultranet.com>
439 * info/dir (Speedbar): Add entry.
441 2000-10-16 Eli Zaretskii <eliz@is.elta.co.il>
443 * INSTALL: Describe the new image-support options to the configure
444 script. List URLs where image support libraries can be found.
446 2000-10-14 Eli Zaretskii <eliz@is.elta.co.il>
448 * info/dir (Top): Add an entry for Eshell.
450 2000-10-02 Dave Love <fx@gnu.org>
452 * configure.in: Check for gai_strerror.
454 2000-10-01 Andreas Schwab <schwab@suse.de>
456 * Makefile.in (install-arch-indep): Update list of installed info
459 2000-09-30 Gerd Moellmann <gerd@gnu.org>
461 * configure.in: Support `sparc*-*-netbsd*'.
463 2000-09-29 Eli Zaretskii <eliz@is.elta.co.il>
465 * info/dir (MIME): Add entry for emacs-mime.
467 2000-09-29 Dave Love <fx@gnu.org>
469 * configure.in: Fix alpha*-dec-osf4 using the osf5 config.
471 2000-09-26 Gerd Moellmann <gerd@gnu.org>
473 * make-dist: Adapt to the change of leim/Makefile which was
474 necessary to ensure a reasonably working `make dist'.
476 * leim-Makefile.in: Moved to leim/Makefile.in..
478 * noleim-Makefile.in: New file, formerly leim/Makefile.in.
480 2000-09-21 Kenichi Handa <handa@etl.go.jp>
482 * leim-Makefile.in (TIT-GB, TIT-BIG5, NON-TIT-GB, NON-TIT-BIG5)
483 (NON-TIT-CNS, JAPANESE, KOREAN, THAI, VIETNAMESE, LAO, INDIAN)
484 (TIBETAN, LATIN, SLAVIC, GREEK, RUSSIAN, MISC): Rename all .el
486 (${TIT}): Adjusted for the above change.
487 (clean mostlyclean): Likewise.
488 (.el.elc): New target.
490 2000-09-19 Gerd Moellmann <gerd@gnu.org>
492 * make-dist: Include XPM and XBM files in lisp/ and subdirs
495 2000-09-18 Gerd Moellmann <gerd@gnu.org>
497 * make-dist (skk): Rename to `ja-dic' because the leim directory
500 2000-09-14 Dave Love <fx@gnu.org>
502 * configure.in: Fix spurion in last change.
504 2000-09-14 Gerd Moellmann <gerd@gnu.org>
506 * configure.in (USE_MMAP_FOR_BUFFERS): Recognize in system
507 configuration files instead of REL_ALLOC_MMAP. Set REL_ALLOC
508 to `no' if defined. Change result report.
510 2000-09-08 Dave Love <fx@gnu.org>
512 * configure.in: Remove spurious `@'s.
514 * aclocal.m4 (AC_FUNC_MMAP): Use fixed version from development
517 2000-09-06 Gerd Moellmann <gerd@gnu.org>
519 * configure.in (REL_ALLOC_MMAP): Recognize in system configuration
520 file and print informational message.
522 * configure.in (AC_FUNC_MMAP): Add.
524 2000-09-01 Gerd Moellmann <gerd@gnu.org>
526 * configure.in: Add ``checking'' messages for
527 XpmReturnAllocPixels.
529 2000-08-28 Gerd Moellmann <gerd@gnu.org>
531 * configure.in: Check <strings.h>; check `index' and `rindex'
534 2000-08-26 Kenichi Handa <handa@etl.go.jp>
536 * configure.in <alpha*-dec-osf*>: Move "NON_GNU_CPP='cpp'" before
537 "case "${canonical}" in".
539 2000-08-25 Dave Love <fx@gnu.org>
541 * configure.in <osf>: Use NON_GNU_CPP='cpp' always.
543 2000-08-25 Kenichi Handa <handa@etl.go.jp>
545 * leim-Makefile.in: Rename skk to ja-dic throughout the file.
547 2000-08-24 Gerd Moellmann <gerd@gnu.org>
549 * configure.in <making srcdir absolute>: Unset CDPATH in case $PWD
550 contains a relative path. Protect against unusable values of
553 2000-08-08 Eli Zaretskii <eliz@is.elta.co.il>
555 * info/dir (WoMan): Add entry.
557 * config.bat (maindir): Update src/_gdbinit even if it does
560 2000-08-07 Gerd Moellmann <gerd@gnu.org>
562 * Makefile.in (config.status): Prepend `$(srcdir)/' to
565 2000-08-03 Gerd Moellmann <gerd@gnu.org>
567 * configure.in: Add support for ia64*-*-linux*.
569 2000-07-27 Gerd Moellmann <gerd@gnu.org>
571 * make-dist (aclocal.m4): Include in distribution.
573 2000-07-26 Dave Love <fx@gnu.org>
575 * configure.in (AC_SYS_LARGEFILE): Moved earlier.
577 2000-07-24 Dave Love <fx@gnu.org>
579 * configure.in: Add AC_SIZE_T.
581 2000-07-18 Dave Love <fx@gnu.org>
583 * configure.in: Reorder so that most tests are done after CPPFLAGS
584 is set from the C_SWITCH_... definitions.
586 2000-07-10 Gerd Moellmann <gerd@gnu.org>
588 * configure.in (HAVE_XPM): Undo previous change. Check for
589 preprocessor define XpmReturnAllocPixels.
591 2000-07-06 Gerd Moellmann <gerd@gnu.org>
593 * configure.in (HAVE_XPM): Check for XpmReturnAllocPixels
594 instead of XpmReadFileToPixmap.
596 2000-07-05 Ken Raeburn <raeburn@gnu.org>
598 * configure.in: Check for <soundcard.h>. Look for ossaudio
599 library, and set LIBSOUND accordingly.
601 2000-07-05 Dave Love <fx@gnu.org>
603 * configure.in: Use AC_HEADER_SYS_WAIT.
605 2000-07-05 Gerd Moellmann <gerd@gnu.org>
607 * make-dist: Check DONTCOMPILE in lisp/Makefile.in instead of
608 lisp/Makefile. Distribute lisp/Makefile.in instead of
611 2000-06-30 Ken Raeburn <raeburn@gnu.org>
613 * configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS,
614 while searching for image-handling libraries.
616 2000-06-26 Gerd Moellmann <gerd@gnu.org>
618 * configure.in (--with-xim): New option.
620 2000-06-23 Dave Love <fx@gnu.org>
622 * configure.in [HAVE_TIMEVAL]: Move gettimeofday test here, test
623 for struct timezone and test how we can call gettimeofday.
624 Check for OSF 5+. Check for term.h.
626 * aclocal.m4: Define the post-2.13 stuff conditionally on autoconf
629 2000-06-23 Gerd Moellmann <gerd@gnu.org>
631 * configure.in (HAVE_LIBXP): Change test for libXp.
633 2000-06-21 Dave Love <fx@gnu.org>
635 * configure.in: Check for fcntl.h. Use AC_FUNC_GETLOADAVG, not
636 simple test for getloadavg and substitute GETLOADAVG_LIBS.
637 Simplify test for GETTIMEOFDAY_ONE_ARGUMENT.
639 2000-06-19 Dave Love <fx@gnu.org>
641 * configure.in (GETTIMEOFDAY_ONE_ARGUMENT): Fix in case
642 _XOPEN_SOURCE is defined.
644 2000-06-16 Gerd Moellmann <gerd@gnu.org>
646 * Makefile.in (distclean): Also make distclean in lisp/.
648 2000-06-15 Eli Zaretskii <eliz@is.elta.co.il>
650 * config.bat: Generate lisp/Makefile from lisp/Makefile.in.
652 2000-06-15 Gerd Moellmann <gerd@gnu.org>
654 * make-dist: Add --help and --snapshot options.
656 2000-06-14 Gerd Moellmann <gerd@gnu.org>
658 * configure.in: Generate lisp/Makefile.
660 * configure.in: Add support for `*-lynxos*'.
661 Use `cpp' as NON_GNU_CPP for `alpha*-dec-osf[5-9]*', as
662 recommended by <Karen.Dorhamer@compaq.com> to fix problems
665 2000-06-13 Ken Raeburn <raeburn@gnu.org>
667 * Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when
668 it's on a continuation line.
670 2000-06-02 Dave Love <fx@gnu.org>
672 * Makefile.in: (install-arch-indep): Add pcl-cvs to list of info
675 * configure.in: Don't specify -n32 flag for mips-sgi-irix6.5.
676 Check for struct exception. Use AC_SYS_LARGEFILE and move ftello
679 * aclocal.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES)
680 (AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New.
682 2000-05-26 Gerd Moellmann <gerd@gnu.org>
684 * configure.in: Add check for speed_t typedef.
686 2000-05-25 Ken Raeburn <raeburn@gnu.org>
688 * Makefile.in (install-arch-dep): Install fns-*.el only if it
689 exists; it won't in the CANNOT_DUMP case.
691 2000-05-25 Gerd Moellmann <gerd@gnu.org>
693 * Makefile.in: Ignore exit status of `unset CDPATH' everywhere.
694 On FreeBSD, the exit status is 1 if CDPATH is not set.
695 (install-arch-indep): Install ebrowse.info.
697 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
699 * configure.in: Check for grandpt and getpt.
701 2000-05-09 Dave Love <fx@gnu.org>
703 * Makefile.in (install-arch-indep): Filter CVS as well as RCS.
705 2000-05-05 Gerd Moellmann <gerd@gnu.org>
707 * make-dist: Make a link for lib-src/grep-changelog. Copy
710 2000-05-01 Eli Zaretskii <eliz@is.elta.co.il>
712 * config.bat: Identify the beginning of the cpp stuff in
713 src/Makefile.in and lib-src/Makefile.in more accurately.
715 2000-04-27 Gerd Moellmann <gerd@gnu.org>
717 * configure.in: Add support for `powerpc*-*-linux-gnu*'.
719 2000-04-19 Gerd Moellmann <gerd@gnu.org>
721 * configure.in: Add support for `powerpc-*-netbsd*'.
723 2000-04-19 Dave Love <fx@gnu.org>
725 * configure.in: Don't use AC_FUNC_GETLOADAVG.
727 * aclocal.m4 (AC_FUNC_MKTIME): Use AC_SUBST.
729 2000-04-16 Dave Love <fx@gnu.org>
731 * Makefile.in (${srcdir}/configure): Depend on aclocal.m4.
733 2000-04-14 Dave Love <fx@gnu.org>
735 * configure.in: Use AC_FUNC_GETLOADAVG, AC_FUNC_MKTIME.
737 * aclocal.m4 (AC_FUNC_MKTIME): New.
739 2000-03-28 Ken Raeburn <raeburn@gnu.org>
741 * configure.in: Line up "--help" output a little better.
743 2000-03-26 Gerd Moellmann <gerd@gnu.org>
745 * Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src):
747 (bootstrap): Rewritten in terms of the new targets above. Make
750 2000-03-12 Gerd Moellmann <gerd@gnu.org>
752 * config.guess, config.sub: Use the versions of the files from
755 2000-03-08 Dave Love <fx@gnu.org>
757 * configure.in: Use AC_PROG_RANLIB, AC_C_PROTOTYPES,
758 AC_C_VOLATILE. Define POINTER_TYPE.
760 * aclocal.m4: New file.
762 2000-03-02 Gerd Moellmann <gerd@gnu.org>
764 * configure.in (machine): Add `mipsel-*-netbsd*' and
767 2000-03-01 Gerd Moellmann <gerd@gnu.org>
769 * configure.in (machine): Add support for `*-auspex-sunos*'.
771 2000-02-29 Gerd Moellmann <gerd@gnu.org>
773 * configure.in (C_OPTIMIZE_SWITCH) [__GNUC__]: Use -O2.
775 2000-02-18 Dave Love <fx@gnu.org>
777 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
779 2000-02-18 Andreas Schwab <schwab@suse.de>
781 * Makefile.in (install-arch-indep): Add eudc to list of installed
784 2000-02-17 Ken Raeburn <raeburn@gnu.org>
786 * configure.in: Include -lz and -ljpeg (if it's available) when
787 testing for the tiff library.
789 2000-02-17 Gerd Moellmann <gerd@gnu.org>
791 * configure.in: Remove LISP_FLOAT_TYPE.
793 2000-02-12 Dave Love <fx@gnu.org>
795 * configure.in: Use AC_FUNC_VFORK.
797 2000-02-01 Gerd Moellmann <gerd@gnu.org>
799 * make-dist: Various fixes for new development tree.
801 * leim-Makefile.in: New file.
803 2000-01-31 Gerd Moellmann <gerd@gnu.org>
805 * Makefile.in (dist): Call ./make-dist.
807 2000-01-24 Dave Love <fx@gnu.org>
809 * configure.in: Remove -G0 from Irix NON_GCC_TEST_OPTIONS.
811 2000-01-18 Gerd Moellmann <gerd@gnu.org>
813 * configure.in (HAVE_GIF): Check for DGifOpen instead of
816 2000-01-11 Andreas Schwab <schwab@suse.de>
818 * Makefile.in (install-arch-indep): Update list of info files to
821 2000-01-05 Dave Love <fx@gnu.org>
823 * configure.in: Check for jerror.h as well as libjpeg.
825 2000-01-03 Andreas Schwab <schwab@suse.de>
827 * Makefile.in (install-arch-indep): Install autotype*. Run
828 install-info on autotype and emacs-faq.info.
830 1999-12-04 Dave Love <fx@gnu.org>
832 * Makefile.in: (install-arch-indep): Depend on `info'.
833 (install-strip): Use `install' as sub-make target.
835 1999-11-23 Ken Raeburn <raeburn@gnu.org>
837 * configure.in: Restore Kerberos code deleted on 1999-05-29 that
838 didn't need to be deleted. Check for the k5crypto library as well
839 as the crypto library; MIT Kerberos 1.1 changed the name.
841 1999-11-18 Dave Love <fx@gnu.org>
843 * configure.in: Fix NON_GNU_CPP for Irix 6 to avoid failing tests.
845 1999-11-11 Erik Naggum <erik@naggum.no>
847 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
849 1999-11-08 Dave Love <fx@gnu.org>
851 * configure.in: Fix change for --with-pop default.
853 1999-11-04 Dave Love <fx@gnu.org>
855 * configure.in: Default to --with-pop. Change sense of with-gcc
856 and with-toolkit-scroll-bars messages to reflect the defaults.
858 1999-11-01 Gerd Moellmann <gerd@gnu.org>
860 * INSTALL: Mention the Emacs Lisp Reference.
862 1999-10-27 Noah Friedman <friedman@splode.com>
864 * configure.in: Check for dynamic ptys (/dev/ptmx, /dev/pts/).
866 1999-10-23 Gerd Moellmann <gerd@gnu.org>
868 * Makefile.in (bootstrap): New target.
870 1999-10-19 Paul Eggert <eggert@twinsun.com>
872 Add support for large files. Merge glibc 2.1.2.
874 * configure.in (AC_CHECK_HEADERS): Add stdio_ext.h.
875 (HAVE_TM_GMTOFF): New symbol.
876 (AC_CHECK_FUNCS): Add __fpending, ftello, getloadavg, mblen,
878 (LOCALTIME_CACHE): Don't include stdlib.h, as config.h does this now.
880 1999-10-09 Stefan Monnier <monnier@cs.yale.edu>
882 * make-dist (dontcompile): look for the DONTCOMPILE variable rather
883 than the obsolete dontcompilefiles pseudo-rule in lisp/Makefile.
885 1999-10-09 Richard M. Stallman <rms@gnu.org>
887 * Makefile.in (uninstall, install-arch-indep, install-arch-dep):
888 Unset CDPATH to prevent cd from generating output.
890 1999-10-08 Stefan Monnier <monnier@cs.yale.edu>
892 * update-subdirs: also ignore CVS subdirs.
894 1999-10-07 Gerd Moellmann <gerd@gnu.org>
896 * Makefile.in (install-arch-indep): Add ada-mode.
898 1999-10-06 Dave Love <fx@gnu.org>
900 * Makefile.in: Add rules for config.status, configure.
902 1999-09-07 Gerd Moellmann <gerd@gnu.org>
904 * configure.in (--with-sound): Removed.
906 1999-08-30 Gerd Moellmann <gerd@gnu.org>
908 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after
910 (HAVE_TIFF): Add -lm to library check.
912 1999-08-28 Richard Stallman <rms@gnu.org>
914 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for
915 -lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down
916 after the other X-related libraries.
918 1999-08-21 Dave Love <fx@gnu.org>
920 * configure.in: Don't check for jpeglib.h.
922 1999-08-20 Gerd Moellmann <gerd@gnu.org>
924 * configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h.
925 (HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none.
927 1999-08-18 Dave Love <fx@gnu.org>
929 * configure.in: : Check for termcap.h.
931 1999-08-15 Gerd Moellmann <gerd@gnu.org>
933 * configure.in: Add --with-toolkit-scroll-bars. If "no",
934 use Emacs' scroll bars, even if configured for Motif or when
937 1999-08-12 Wolfgang Rupprecht <wolfgang@wsrcc.com>
939 * configure.in: Check for getaddrinfo.
941 1999-08-04 Eli Zaretskii <eliz@gnu.org>
943 * config.bat: Make --no-debug work again by removing -gcoff.
945 1999-07-30 Dave Love <fx@gnu.org>
947 * configure.in: Check for stdlib.h.
949 1999-07-19 Dave Love <fx@gnu.org>
951 * configure.in: Grok sparc64-*-linux-gnu*.
953 1999-07-12 Richard Stallman <rms@gnu.org>
955 * Version 20.4 released.
957 1999-06-23 Karl Heuer <kwzh@gnu.org>
959 * make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state.
960 Quote $EMACS, in case it's a program with args.
962 1999-05-29 Richard M. Stallman <rms@gnu.org>
964 * configure.in: Delete the Kerberos stuff.
966 1999-05-27 Greg Hudson <ghudson@mit.edu>
968 * configure.in: Prefer kerberos 5 names.
970 1999-04-26 Richard M. Stallman <rms@gnu.org>
972 * configure.in: Check for libXp.
974 1999-04-08 Richard Stallman <rms@gnu.org>
976 * make-dist: Include change logs in subdirs of `lisp'.
978 1999-04-05 Richard Stallman <rms@gnu.org>
980 * Makefile.in (mkdir): If we create ${datadir}, make it world-readable.
981 (install-arch-indep): Make ${datadir}/emacs world-readable.
983 1999-03-30 Eli Zaretskii <eliz@gnu.org>
985 * config.bat: Use epaths.* instead of paths.*.
987 1999-03-07 Eli Zaretskii <eliz@gnu.org>
989 * INSTALL: Add detailed instructions to unpack and install
992 1999-02-26 Richard Stallman <rms@gnu.org>
994 * configure.in: Use epaths.h and epaths-force instead of paths....
996 * Makefile.in (epaths-force): Renamed from paths-force;
997 operate on epaths.in and produce epaths.h.
999 1999-02-24 Richard Stallman <rms@gnu.org>
1001 * make-dist: Fix nt/icons directory handling.
1003 1999-02-22 Simon Josefsson <jas@pdc.kth.se>
1005 * configure.in (f301-fujitsu-uxpv4.1): New target.
1007 1999-02-20 Richard Stallman <rms@gnu.org>
1009 * make-dist (tempparent): Fix command to update info files.
1011 1999-02-09 Richard Stallman <rms@gnu.org>
1013 * configure.in (powerpc-apple-netbsd*): New alternative.
1015 1999-01-25 Geoff Voelker <voelker@cs.washington.edu>
1017 * make-dist: Include the new directory nt/icons in distributions.
1019 1999-01-19 Richard Stallman <rms@psilocin.ai.mit.edu>
1021 * configure.in: Change message about HAVE_XFREE386.
1023 1999-01-07 Eli Zaretskii <eliz@gnu.org>
1025 * config.bat: Support configuring with leim.
1027 1998-12-16 Petri Kaurinkoski <Petri.Kaurinkoski@hut.fi>
1029 * configure.in (mips-sgi-irix6.5): New target.
1031 1998-12-16 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1033 * configure.in: Remove GSS-API support, since it has been removed
1036 1998-12-04 Markus Rost <rost@delysid.gnu.org>
1038 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
1040 1998-12-04 Andreas Schwab <schwab@delysid.gnu.org>
1042 * Makefile.in: Don't install customize info file. Run
1043 install-info on viper info file.
1045 1998-11-29 Richard Stallman <rms@psilocin.ai.mit.edu>
1047 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
1049 1998-11-16 Kenichi Handa <handa@etl.go.jp>
1051 * configure.in (*-*-bsdi4*): New target.
1053 1998-11-13 Ehud Karni <ehud@unix.simonwiesel.co.il>
1055 * configure.in: Fix previous change.
1057 1998-11-11 Richard Stallman <rms@gnu.org>
1059 * configure.in (aviion-intel): New machine.
1061 1998-11-04 Kenichi Handa <handa@etl.go.jp>
1063 * configure.in (mips-nec-sysv4*): New target.
1065 1998-11-03 Andreas Schwab <schwab@delysid.gnu.org>
1067 * Makefile.in (install-arch-dep): Fix last change and use fns-*.el
1070 1998-10-31 Richard Stallman <rms@psilocin.ai.mit.edu>
1072 * make-dist: Don't include fns*.el in dist.
1074 1998-10-30 Dave Love <fx@gnu.org>
1076 * configure.in: Don't mkdir cpp.
1078 1998-10-30 Andreas Schwab <schwab@delysid.gnu.org>
1080 * Makefile.in (install-arch-dep): Install src/fns-*.el in
1083 1998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu>
1085 * Version 20.3 released.
1087 1998-07-30 Paul Eggert <eggert@twinsun.com>
1089 * Makefile.in (Makefile, src/Makefile, src/config.stamp)
1090 (lib-src/Makefile, man/Makefile, oldXMenu/Makefile)
1091 (lwlib/Makefile, leim/Makefile):
1092 Prepend $(srcdir)/ to rule dependencies outside this dir.
1094 1998-06-30 Richard Stallman <rms@psilocin.ai.mit.edu>
1096 * configure.in: Use unset CDPATH instead of making it empty.
1098 1998-06-20 Karl Heuer <kwzh@gnu.org>
1100 * configure.in: Assume unspecified Solaris is 2.5, not 2.4.
1102 1998-06-07 Richard Stallman <rms@psilocin.ai.mit.edu>
1104 * make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el
1105 and default.el. Sort the results.
1107 1998-05-31 Karl Heuer <kwzh@gnu.org>
1109 * Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't
1112 1998-05-14 Richard Stallman <rms@psilocin.ai.mit.edu>
1114 * Makefile.in (install-arch-indep):
1115 Don't alter site-lisp/subdirs.el if it exists.
1117 1998-05-12 Richard Stallman <rms@psilocin.ai.mit.edu>
1119 * Makefile.in (install-arch-indep): Put `-' on commands to create
1120 subdirs.el in site-lisp dirs.
1122 1998-05-07 Richard Stallman <rms@psilocin.gnu.org>
1124 * Makefile.in (install-arch-indep): Fix typo in previous change.
1126 1998-05-06 Richard Stallman <rms@psilocin.gnu.org>
1128 * Makefile.in (install-arch-indep): Pass --dir-file to install-info.
1130 1998-04-28 Richard Stallman <rms@psilocin.gnu.org>
1132 * Makefile.in (mkdir): Create the site-lisp dirs.
1133 (install-arch-indep): Make site-lisp/subdirs files world-readable.
1135 1998-04-26 Richard Stallman <rms@psilocin.gnu.org>
1137 * Makefile.in (INSTALL_INFO): New variable.
1138 (install-arch-indep): Don't replace the dir file if it already exists.
1139 Use the install-info program, via INSTALL_INFO, to add entries.
1140 Make the `info' subdir and the Info files world-readable.
1142 1998-04-16 Eli Zaretskii <eliz@delysid.gnu.org>
1144 * config.bat: Make sure the environment is large enough to support
1145 all the "set foo=bar" commands. Update pointers to DJGPP FTP
1148 1998-04-10 Karl Heuer <kwzh@gnu.org>
1150 * make-dist: Don't accept EMACS=t when testing for $EMACS set.
1152 1998-04-06 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1154 * configure.in: Add --with-gssapi to specify GSS-API
1155 authentication support for movemail.
1157 1998-04-02 Richard Stallman <rms@psilocin.ai.mit.edu>
1159 * Makefile.in (install-arch-indep): Fix previous change.
1161 1998-03-30 Richard Stallman <rms@psilocin.ai.mit.edu>
1163 * Makefile.in (info): Run man in build dir, not srcdir.
1165 1998-03-28 Richard Stallman <rms@psilocin.ai.mit.edu>
1167 * Makefile.in (install-arch-indep): Fix previous change.
1169 1998-03-23 Kenichi Handa <handa@etl.go.jp>
1171 * Makefile.in (top_distclean): Check the existence of `lock'
1174 1998-03-22 Richard Stallman <rms@gnu.org>
1176 * Makefile.in (install-arch-indep): Put special subdirs.el files
1177 in site-lisp dirs. Use normal-top-level-add-subdirs-to-load-path.
1179 1998-03-21 Richard Stallman <rms@psilocin.gnu.org>
1181 * make-dist: Fix shell syntax in check for missing .el or .elc files.
1183 1998-03-09 Richard Stallman <rms@psilocin.gnu.org>
1185 * configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10.
1186 (m68*-hp-hpux*): Handle versions 1X like 10.
1188 1998-03-07 Richard Stallman <rms@psilocin.gnu.org>
1190 * make-dist: PROBLEMS is now in etc, not top level dir.
1192 * Makefile.in (SOURCES): Delete PROBLEMS.
1194 1998-02-25 Richard Stallman <rms@gnu.org>
1196 * configure.in (hppa*-hp-hpux*): Use hpux10 by default.
1198 * Makefile.in (install-arch-indep): Do chmod a+x on subdirs.
1200 1998-01-17 Richard Stallman <rms@gnu.org>
1202 * Makefile.in (install-arch-indep): Add semicolon before `else'.
1204 1998-01-02 Richard Stallman <rms@psilocin.gnu.org>
1206 * make-dist (tempparent): New option --no-check.
1208 * make-dist: Don't do anything with cpp directory.
1210 1997-12-20 Richard Stallman <rms@psilocin.gnu.org>
1212 * configure.in (sparc-fujitsu-sysv4*): New target.
1214 1997-12-17 Andreas Schwab <schwab@gnu.org>
1216 * configure.in: Cache more tests. Add missing quotes around
1217 message with embedded comma.
1219 1997-12-04 Karl Heuer <kwzh@gnu.org>
1221 * Makefile.in (unlock, relock): Don't reference cpp/ directory.
1223 1997-11-26 Joel N. Weber II <devnull@gnu.org>
1225 * make-dist: Changed the comment about `umask 0' to say `Don't
1226 restrict access to any files.'; previously it said `Don't protect
1227 any files', which may have implied that we think fascism is good.
1229 1997-11-24 Paul Eggert <eggert@twinsun.com>
1231 * configure.in (AC_CHECK_FUNCS): Add strftime. The new GNU C library
1232 strftime needs the underlying host's strftime for locale dependent
1235 1997-11-20 Abraham Nahum <miko@uxsrvc.tti.co.il>
1237 * configure.in (i586-dg-dguxR4.*): New name in case branch.
1239 1997-11-20 Eli Zaretskii <eliz@is.elta.co.il>
1241 * config.bat: Configure the man subdirectory.
1243 1997-11-07 Paul Eggert <eggert@twinsun.com>
1245 * configure.in (AC_CHECK_LIB): Add -lintl.
1247 1997-11-07 Karl Heuer <kwzh@gnu.org>
1249 * make-dist (check for .elc files): Avoid bash-specific syntax.
1250 (check for overflow 14-char limit): Simplify.
1252 1997-11-07 Richard Stallman <rms@gnu.org>
1254 * Makefile.in (install): Move blessmail last.
1256 1997-10-02 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1258 * configure.in (gettimeofday, one arg or two):
1259 Clarify messages by avoiding double negative.
1261 1997-09-30 Karl Eichwalder <ke@suse.de>
1263 * Makefile.in (install-arch-indep): install the widget info file.
1265 1997-09-24 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1267 * configure.in (with-pop, with-kerberos): Need to check Kerberos
1268 libraries in reverse order, so that libraries will appear in the
1269 correct dependency order on the link line (and so that the
1270 configure checks themselves will work properly when early
1271 libraries depend on later ones).
1273 1997-09-21 Erik Naggum <erik@naggum.no>
1275 * make-dist (making links to `src'): Keep timestamp on copied
1278 * make-delta: New script to produce delta distributions.
1280 1997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1282 * Version 20.2 released.
1284 1997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1286 * Version 20.1 released.
1288 * Makefile.in (install-leim): Depend on mkdir.
1289 (leim): Depend on src.
1291 1997-09-13 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1293 * configure.in: Recognize alpha* instead of just alpha.
1295 1997-09-12 Paul Eggert <eggert@twinsun.com>
1297 * leim-Makefile.in (mostlyclean, maintainer-clean): New targets.
1299 1997-09-12 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1301 * update-subdirs: Use rm -f.
1303 1997-09-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1305 * update-subdirs: Delete subdirs.el if this dir has no subdirs.
1306 Ignore subdirs named Old.
1308 1997-08-04 Kenneth Stailey <kstailey@elbereth.disclosure.com>
1310 * configure.in: Add OpenBSD clause to set $machine.
1312 1997-09-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1314 * make-dist: Recompile everything after updating various Lisp files.
1315 Recompile in leim as well as lisp.
1316 Check in leim as well as lisp for mismatched files and too-long names.
1318 1997-09-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1320 * Makefile.in (TAGS tags): Simply refer this to the src subdir.
1322 1997-08-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1324 * Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it
1325 before trying to copy anything from it.
1327 1997-08-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1329 * Makefile.in (man/Makefile): New target.
1330 (tags): Define env var EMACS and run Makefile from build dir.
1332 1997-08-27 Eli Zaretskii <eliz@psilocin.gnu.ai.mit.edu>
1334 * config.bat: If src/_gdbinit doesn't exist, try using
1335 src/.gdbinit to create it (for building on Windows 95).
1337 1997-08-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1339 * Makefile.in (install-arch-indep):
1340 Discard extra data in tar | tar pipes.
1342 1997-08-24 NIIBE Yutaka <gniibe@mri.co.jp>
1344 * configure.in (x_default_search_path): Corrected
1345 '${x_library}' to '${x_library}/X11'.
1347 1997-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1349 * configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1,
1351 1997-08-22 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1353 * configure.in: Support auto-configuration of both Kerberos V4 and
1354 Kerberos V5 for movemail, including detection of V4 and V5 header
1355 files and libraries.
1357 1997-08-16 NIIBE Yutaka <gniibe@etl.go.jp>
1359 * configure.in: Compute x_default_search_path
1360 and substitute into makefiles.
1362 * Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h.
1364 1997-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1366 * Makefile.in (install-arch-indep): Run list-load-path-shadows.
1368 1997-08-07 Erik Naggum <erik@naggum.no>
1370 * configure.in: Remove lockdir, it is no longer needed.
1371 * Makefile.in (mkdir): Don't create lockdir.
1372 (lockdir): Variable deleted.
1373 (paths-force): Don't operate on PATH_LOCK.
1375 1997-08-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1377 * leim-Makefile.in (clean, distclean): New targets.
1379 * make-dist: Include leim/ChangeLog in leim distribution.
1381 1997-08-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1383 * configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP.
1385 1997-07-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1387 * Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS.
1389 1997-07-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1391 * Makefile.in (LDFLAGS): Get this from configure, like CFLAGS.
1393 1997-07-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1395 * make-dist: Update leim/leim-list.el.
1396 Pass along value of $EMACS when updating lisp dir.
1398 1997-07-25 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1400 * configure.in (doug_lea_malloc): Make __after_morecore_hook a
1401 prerequisite to the use of Doug Lea's malloc.
1403 1997-07-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1405 * Makefile.in (top_distclean): Use -f to delete contents of lock dir.
1407 * make-dist: Use name leim/SKK-DIC, not leim/SKK.
1409 1997-07-16 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1411 * make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim.
1413 1997-07-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1415 * configure.in (mips-sony-newsos6*): File news-risc.h renamed
1418 1997-07-10 Eli Zaretskii <eliz@is.elta.co.il>
1420 * config.bat: Use `sed' instead of `cp', which might not be
1423 1997-07-09 Kenichi Handa <handa@etl.go.jp>
1425 * Makefile.in (mostlyclean): Add cleaning leim directory.
1426 (clean, distclean, maintainer-clean): Likewise.
1428 1997-07-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1430 * make-dist (bogosities): Check subdirs of `lisp' also.
1432 1997-07-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1434 * make-dist (etc): Really avoid symlinks now.
1435 (lisp): Don't delete from subdirs the things we never copy.
1437 1997-07-07 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1439 * Makefile.in (install-arch-indep): Correct the target name.
1440 The first letter `i' was dropped by the previous change of mine.
1442 1997-07-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1444 * configure.in (leim/Makefile): Generate this.
1445 (*-sysv4.2uw*): Recognize new alternative.
1447 * leim-Makefile.in: Renamed from leim-Makefile.
1449 * make-dist: Set up real-leim subdirectory,
1450 with the real contents of leim; then move it to
1451 a separate top-level directory.
1453 * make-dist: Don't mention site-lisp, site-init, site-start
1454 or default, when listing files hat are not compiled and should be.
1456 * configure.in: Create src/config.stamp at the end.
1458 1997-07-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1460 * Makefile.in (install-leim): Correct previous change.
1462 1997-07-02 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1464 * Makefile.in (install-leim): New target.
1465 (install): Depend on install-leim.
1467 1997-07-01 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1469 * Makefile.in (SUBDIR): Add leim.
1470 (SUBDIR_MAKEFILES): Add leim/Makefile.
1471 (leim/Makefile): New target.
1473 1997-07-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1475 * leim-Makefile: New file.
1476 * make-dist: Initialize a `leim' subdirectory with that makefile.
1478 1997-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1480 * configure.in (GNU_MALLOC_reason): Fix message text.
1482 1997-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1484 * make-dist (lisp): Don't process subdirs that start with =.
1485 (etc): Copy symlinks, as in src.
1487 1997-06-26 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1489 * configure.in (i*86-*-unixware*): New alternative.
1491 1997-06-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1493 * Makefile.in (src/config.stamp): Target renamed from src/config.h
1494 and touch it explicitly.
1496 * configure.in (mips-sony-newsos6*): New alternative.
1497 (mips-*-linux-gnu*): New alternative.
1498 (*-*-bsdi*): New alternative.
1499 (i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives.
1501 1997-06-22 Dave Love <d.love@dl.ac.uk>
1503 * Makefile.in (lib-src): Depend on src/config.h (e.g. for
1505 (src/config.h): New target to re-configure if src/config.in
1508 1997-06-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1510 * configure.in (shutdown): Check for `shutdown' function.
1512 1997-06-18 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1514 * update-subdirs: Include the directory "language" in subdirs.
1516 1997-06-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1518 * configure.in (m88k-dg-dgux4*): New alternative.
1519 (alpha-*-netbsd*): New alternative.
1520 (powerpcle-*-solaris2*): New alternative.
1522 1997-05-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1524 * make-dist: Warn about .el files that are not compiled.
1526 1997-05-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1528 * Makefile.in (dist): Don't run update-subdirs here,
1529 since make-dist now gets that done.
1531 * make-dist: Use the new `updates' target in lisp/Makefile.
1533 * make-dist: Use new non-file targets in lisp/Makefile.
1535 1997-04-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1537 * make-dist: Handle all subdirs of `lisp' uniformly.
1538 Don't handle `term' and `language' specially.
1539 Clear out umask at the beginning.
1541 1997-04-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1543 * make-dist: Use Make to update finder-inf.el and autoloads.
1544 Also update cus-load.el.
1546 1997-04-09 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1548 * configure.in (doug_lea_malloc): First check for SYSTEM_MALLOC,
1549 in case it is desirable to disable the GNU malloc features with
1552 1997-04-08 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1554 * configure.in (DOUG_LEA_MALLOC):
1555 Define if malloc_{get,set}_state exist.
1557 1997-03-05 Ken'ichi Handa <handa@etl.go.jp>
1559 * make-dist: Make links for files under lisp/language.
1561 1997-02-20 Kenichi Handa <handa@etl.go.jp>
1563 * update-subdirs: Exclude the directory "language" from subdirs.
1565 1997-01-26 Karl Heuer <kwzh@gnu.ai.mit.edu>
1567 * configure.in: Check for rint and cbrt.
1569 1997-01-01 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1571 * make-dist: Use $EMACS to say where to run Emacs.
1572 Add --no-update option.
1574 1996-12-30 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1576 * configure.in (hppa1.1-hitachi-hiuxmpp): New configuration.
1578 1996-12-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1580 * make-dist (copying src): Check thoroughly for symlinks
1581 and copy them in all cases. Regularize the linking of *.in
1582 and *.opt and ChangeLog files.
1583 (copying lib-src): Likewise.
1584 Don't rm getdate.c or y.tab.*--they don't exist any more.
1586 1996-12-18 Jonathan I. Kamens <jik@annex-1-slip-jik.cam.ov.com>
1588 * configure.in: Check for libmail, maillock.h and
1589 touchlock (for movemail).
1591 1996-12-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1593 * configure.in (limits.h): Check for this file.
1595 1996-12-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1597 * configure.in (rs6000-ibm-aix4.2): New alternative.
1598 (rs6000-ibm-aix4.0): New alternative.
1599 (rs6000-ibm-aix4*): Assume aix 4.1 by default.
1601 1996-11-22 Ben Harris <bjh21@cam.ac.uk>
1603 * configure.in: Recognize vax-*-netbsd*.
1605 1996-11-06 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1607 * configure.in (locallisppath): Add leim directory.
1609 1996-10-31 Eli Zaretskii <eliz@is.elta.co.il>
1611 * config.bat: Make sure `mv' supports forward slashes and -f.
1613 1996-10-28 Christian Limpach <chris@nice.ch>
1615 * configure.in (hppa*-next-nextstep*): * added after hppa
1616 to accept hppa1.0 and hppa1.1.
1618 1996-10-05 Marcus G. Daniels <marcus@coulee.tdb.com>
1620 * configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX.
1621 * configure.in (ld_switch_machine): Fix typo.
1623 1996-09-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1625 * configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE
1626 from config.h and use them in $ac_link.
1628 1996-09-28 Erik Naggum <erik@psilocin.gnu.ai.mit.edu>
1630 * configure.in: Create a subdir named `lisp'.
1632 1996-09-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1634 * configure.in: Check for getcwd.
1636 1996-09-04 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1638 * configure.in: Check for termios.h. Check for setpgid.
1640 1996-08-31 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1642 * configure.in: Check for setrlimit.
1644 1996-08-31 Paul Eggert <eggert@twinsun.com>
1646 * configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo.
1648 1996-08-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1650 * configure.in: Check for utimes.
1652 * configure.in: Check for com_err library, but only
1653 if --with-kerberos was used. Check for krb and des
1654 only if --with-kerberos.
1656 1996-08-26 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1658 * Makefile.in (INSTALL_STRIP): New variable.
1659 (install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM.
1660 (install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src.
1662 1996-08-25 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1664 * configure.in: Check for krb and des libraries.
1666 1996-08-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1668 * configure.in (*-sunos4.1.[3-9]*noshare):
1669 Use sunos413, not sunos4-1-3.
1670 (m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3.
1671 (arm-acorn-riscix1.2*): Use riscix12, not riscix1-2.
1673 1996-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1675 * Makefile.in (src/paths.h): Target deleted.
1676 (paths-force): Delete all dependencies on this target
1677 but don't delete the target.
1678 (install): Depend on `all'.
1679 (paths-force): Don't print a message.
1681 * configure.in: Generate src/paths.h here.
1683 1996-08-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1685 * configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS):
1686 New variables that affect linking only.
1687 (alpha-dec-osf*): Use those instead of previous change.
1689 1996-08-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1691 * Makefile.in (install-arch-indep): Install info/messages.
1693 1996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1695 * Version 19.33 released.
1697 1996-08-10 Marcus Daniels <marcus@sayre.sysc.pdx.edu>
1699 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1700 Fix previous change.
1702 1996-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1704 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1707 1996-08-07 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1709 * configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS
1710 and NON_GCC_TEST_OPTIONS.
1712 1996-08-06 Paul Eggert <eggert@twinsun.com>
1714 * configure.in (LOCALTIME_CACHE): Don't put a string literal
1715 "TZ=..." in environ.
1717 1996-08-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1719 * make-dist (msdos): Add is_exec.c, sigaction.c to distribution.
1721 1996-08-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1723 * configure.in (*-sunos4.1.[3-9]*noshare): Move this before
1724 the more general *-sunos4.1.[3-9]* clause.
1726 1996-07-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1728 * Version 19.32 released.
1730 * configure.in (*-sco3.2v5*):
1731 Set OVERRIDE_CPPFLAG to a string of one space.
1732 Fix the code that uses OVERRIDE_CPPFLAG.
1734 1996-07-16 Karl Heuer <kwzh@gnu.ai.mit.edu>
1736 * configure.in: Undo previous change.
1738 1996-07-16 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1740 * config.sub: Use `pc', not `unknown', when canonicalizing
1741 the vendor for ...86.
1743 1996-07-15 David Mosberger-Tang <davidm@AZStarNet.com>
1745 * configure.in: Check for termios.h header.
1747 1996-07-11 Bill Mann <dvmann@dvncr.praxisint.com>
1749 * configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3
1751 1996-07-07 Karl Heuer <kwzh@gnu.ai.mit.edu>
1753 * configure.in: Split bsdos2 and bsdos2-1.
1755 1996-07-06 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1757 * config.sub: If last two words are not a recognized
1758 KERNEL-OS pair, use just the last word as OS, as in 19.31.
1759 Make conversion of gnu/linux to linux-gnu really work.
1761 * config.sub: If vendor unspecified with i386, use `pc' not `unknown'.
1763 1996-06-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1765 * configure.in (check for using Lucid widgets by default):
1766 Eliminate indentation that confuses some compilers.
1768 1996-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1770 * config.sub: Convert linux and gnu/linux to linux-gnu.
1772 * make-dist: Don't update getdate.c.
1773 Ignore =... files when checking for too-long Lisp file names.
1775 1996-06-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1777 * configure.in (euidaccess): Check for that, not for eaccess.
1779 1996-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1781 * configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from
1783 (mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS.
1785 1996-06-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1787 * configure.in: Rename lignux to linux-gnu in configuration names.
1788 Use gnu-linux as the opsys value (s/ file name).
1789 Allow i686 just like i386, i486, i586.
1791 1996-06-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1793 * configure.in (i*86-*-sco3.2v5): New alternative.
1794 (OVERRIDE_CPPFLAG): New variable.
1795 (CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that.
1797 * configure.in: Specify vpath for .texi files.
1799 1996-06-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1801 * configure.in: Always check for HAVE_X11R5.
1802 Separately decide whether to use a toolkit by default.
1804 1996-06-04 Bill Mann <dvmann@dvhpux1.praxisint.com>
1806 * configure.in: If X11R5 is missing the Xaw headers,
1807 default to --with-x-toolkit=no.
1809 1996-05-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1811 * configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000.
1813 1996-05-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1815 * Makefile.in (install-arch-indep): If cd etc makes output,
1816 don't treat that as part of the tar data.
1817 Check that ./lisp actually exists.
1819 1996-05-29 Karl Heuer <kwzh@gnu.ai.mit.edu>
1821 * make-dist: Check for long file names.
1823 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1825 * Version 19.31 released.
1827 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1829 * configure.in: Recognize sparc-*-lignux.
1831 1996-05-03 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1833 * make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist.
1834 Don't include config.w95.
1836 1996-04-21 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1838 * make-dist: Replace --no-clean-up and --no-tar options
1839 with --clean-up and --tar, so that the default is useful.
1841 1996-04-15 Eli Zaretskii <eliz@is.elta.co.il>
1843 * config.bat: Make sure the GDB init file is called src/_gdbinit;
1844 if not, tell the user to rename it and abort.
1846 1996-04-14 Eli Zaretskii <eliz@is.elta.co.il>
1848 * config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE
1851 1996-04-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1853 * config.bat (djgpp_ver): Variable renamed from djgpp-ver.
1855 * make-dist (MANIFEST): Fix previous change.
1856 (msdos): Put mainmake.v2 into the dist.
1858 1996-04-10 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1860 * make-dist: Exit if autoconf fails.
1862 1996-04-10 Eli Zaretskii <eliz@is.elta.co.il>
1864 * config.bat: Set djgpp-ver, and unset it at the end.
1865 Add a number of conditionals for DJGPP version 2.
1866 Rename label libsrc2 to libsrc3.
1867 Substitute for LDFLAGS in src/Makefile.
1868 Substitute for ALL_CFLAGS in lib-src/Makefile.
1870 1996-04-08 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1872 * configure.in (ncurses): Check this after checking fns like strerror.
1874 1996-04-08 Erik Naggum <erik@naggum.no>
1876 * make-dist (MANIFEST): Don't include lines from =files.
1878 1996-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1880 * make-dist: Don't put lisp/dired.todo in the dist.
1882 1996-04-05 Richard Stallman <rms@lucy.gnu.ai.mit.edu>
1884 * configure.in (HAVE_NCURSES): Look for library named ncurses.
1886 * configure.in (setlocale): Check for it.
1888 * configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp.
1890 1996-03-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1892 * configure.in: Use lignux instead of linux as value of opsys.
1894 1996-03-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1896 * Makefile.in (install-strip): Fix whitespace.
1897 Get rid of continuation.
1899 * config.sub: Convert linux or gnu/linux to lignux.
1901 1996-03-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1903 * configure.in: Accept lignux in configuration name.
1905 1996-03-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1907 * Makefile.in (install-strip): New target.
1909 1996-03-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1911 * Makefile.in (top_distclean): Use `|| true' to ignore error in rm.
1912 -f failed to do the job on Suns.
1914 1996-03-13 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1916 * Makefile.in (install-arch-dep): Don't depend on install-arch-indep.
1918 * configure.in (linux/version.h): Check for this header.
1920 1996-03-12 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1922 * configure.in: Remove -fno-builtin hackery from -lm check.
1924 1996-03-08 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1926 * configure.in (-lm check): If $GCC, append -fno-builtin to $CC for
1929 * configure.in (AC_PREREQ): Require version 2.8 of Autoconf.
1931 1996-03-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1933 * configure.in: Check for ncurses.
1935 1996-02-28 Paul Eggert <eggert@twinsun.com>
1937 * configure.in (LOCALTIME_CACHE):
1938 Also define if localtime mishandles unsetting TZ.
1939 This works around a localtime bug in mips-dec-ultrix.
1941 1996-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1943 * make-dist (finder-inf.el): Use finder-compile-keywords-make-dist.
1945 * configure.in: Improve messages about X versions.
1947 1996-02-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1949 * configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null.
1951 1996-02-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1953 * configure.in (HAVE_X11XTR6): Set it as a shell variable.
1954 (HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE.
1956 * Makefile.in (install-arch-dep): Depend on install-arch-indep.
1957 (install): Put install-arch-indep before install-arch-dep.
1959 1996-02-20 Dave Love <d.love@dl.ac.uk>
1961 * INSTALL: Clarify info about MS-DOS path handling.
1963 1996-02-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1965 * Makefile.in (install-arch-indep): Install info/ccmode*.
1966 In previous change, protect against /bin/pwd returning null string.
1968 1996-02-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1970 * Makefile.in (install-arch-indep): Copy build-dir's lisp subdir
1973 1996-02-01 Paul Eggert <eggert@twinsun.com>
1975 * configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar.
1977 1996-01-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1979 * configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails.
1981 1996-01-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1983 * Makefile.in (extraclean): Use ${top_distclean} to ensure
1984 we delete everything distclean deletes.
1986 1996-01-23 Karl Heuer <kwzh@gnu.ai.mit.edu>
1988 * make-dist (lwlib): Don't distribute lwlib-Xol* files.
1990 1996-01-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1992 * configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE
1993 into LDFLAGS instead of into LIBS.
1995 1996-01-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1997 * configure.in (HAVE_XMU): Fix typo in previous change.
1999 1996-01-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2001 * configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc.
2003 1996-01-10 Erik Naggum <erik@naggum.no>
2005 * configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'.
2007 1996-01-10 Karl Heuer <kwzh@gnu.ai.mit.edu>
2009 * Makefile.in (install-arch-indep): Ignore error if no chmod -R.
2011 1996-01-10 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2013 * configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit
2014 and use -lXt to link it.
2016 1996-01-08 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2018 * configure.in (locallisppath): Put version-specific dir first.
2020 1996-01-07 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2022 * configure.in (hppa-*-nextstep*): New alternative.
2023 (USE_X_TOOLKIT): By default, set this to "maybe";
2024 and change that later to LUCID or "no" according to X11 version.
2026 * make-dist: Recompile outdated .elc files and update all autoloads.
2028 1996-01-05 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
2030 * configure.in (locallisppath): Fix typo in last change: " -> '.
2032 1996-01-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2034 * configure.in (locallisppath): Add ../emacs/VERSION/site-lisp.
2036 1995-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2038 * Makefile.in (install-arch-indep): Give all files read permission.
2040 1995-12-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2042 * configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*):
2043 If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5.
2045 1995-12-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2047 * configure.in: Determine HAVE_X11R6.
2048 (HAVE_MENUS): Renamed from HAVE_X_MENU.
2050 1995-12-21 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2052 * configure.in: Just "solaris" now defaults to version 2.4.
2053 Add sunos4.1.n-noshare as alternative.
2055 1995-12-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2057 * configure.in (mips-sgi-irix6*): Set NON_GNU_CPP.
2059 1995-11-29 Erik Naggum <erik@naggum.no>
2061 * Makefile.in (install-arch-indep): Add missing backslash.
2063 1995-11-29 Karl Eichwalder <ke@ke.Central.DE>
2065 * Makefile.in (install-arch-indep): Don't install
2066 lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo.
2068 1995-11-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2070 * Makefile.in (install-arch-indep): Fix previous change.
2072 * configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*.
2074 1995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2076 * Version 19.30 released.
2078 * make-dist (lisp): Exclude subdirs.el.
2080 1995-11-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2082 * make-dist (etc): Delete *.orig and *.rej.
2084 1995-11-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2086 * Makefile.in (install-arch-indep): Rename old info/dir only if exists.
2088 1995-11-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2090 * configure.in (hppa*-hp-hpux10*): Use s/hpux10.h.
2092 1995-11-14 Geoff Voelker <voelker@cs.washington.edu>
2094 * make-dist (nt): Rename install, readme, and todo to
2095 INSTALL, README, and TODO.
2097 1995-11-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2099 * make-dist (lisp): Don't distribute site-start.
2101 1995-11-06 Karl Heuer <kwzh@gnu.ai.mit.edu>
2103 * make-dist: Break the hard link on alloca.c.
2105 1995-11-04 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2107 * configure.in (LIBS): Add libsrc_libs and keep the old LIBS.
2109 1995-11-02 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2111 * make-dist (src, lib-src): Don't distribute Makefile.c.
2112 (etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc.
2114 1995-10-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2116 * Makefile.in (mkdir): Create man1dir, not mandir.
2117 (uninstall): Use man1dir, not mandir.
2119 1995-10-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2121 * Makefile.in (man1dir): New variable.
2122 (install-arch-indep): Use man1dir.
2124 * configure.in (sparc-*-nextstep*): Remove incorrect .h's.
2126 * make-dist: Create lisp/MANIFEST.
2128 1995-10-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2130 * configure.in (m68k-*-linux*): New alternative.
2132 1995-10-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2134 * make-dist: Use new names config.in, paths.in, and
2135 {src,lib-src}/Makefile.in.
2137 1995-10-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2139 * configure.in: Don't bother checking for drem.
2141 1995-10-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2143 * Makefile.in (distclean): Delete line with just a tab in it.
2144 (install-arch-indep): Delete spaces that precede tabs.
2145 Delete spurious `fi' left from previous change.
2146 (install): Supply `true' as command, to avoid null command.
2148 1995-10-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2150 * configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'.
2152 1995-09-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2154 * configure.in (powerpc-*-solaris2): New alternative.x
2156 1995-09-12 Karl Heuer <kwzh@gnu.ai.mit.edu>
2158 * Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead
2159 of paths.h.tmp$$, to avoid going beyond 14 characters.
2161 1995-09-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2163 * configure.in: Improve error msg for invalid --with-x-toolkit value.
2165 1995-09-06 Paul Eggert <eggert@twinsun.com>
2167 * configure.in (LOCALTIME_CACHE): Define if tzset exists and
2168 if localtime caches TZ. Check for tzset.
2170 1995-09-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2172 * config.bat: Simplify using new names file names src/makefile.in,
2173 config.in, paths.in. Change Echo commands not to use `.
2175 1995-08-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2177 * Makefile.in (install-arch-indep): Always install the new dir file;
2178 rename the previous dir file to dir.bak or dir.old.
2180 1995-08-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2182 * configure.in (RANLIB): Substitute this into makefiles.
2183 Set it specially on solaris; set it by default on other systems.
2185 * configure.in: Fix previous Alpha change.
2187 1995-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2189 * configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and
2190 NON_GCC_TEST_OPTIONS.
2192 1995-08-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2194 * configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS
2195 from config.h, use SPECIFIED_CFLAGS to get what the user specified.
2197 * configure.in (alpha-*-linux*): New configuration.
2199 1995-08-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2201 * configure.in (m68*-next-*): Use m68k.h and nextstep.h.
2202 (m68k-next-nextstep*): New alias for that.
2203 (i*86-*-nextstep*): Use nextstep.h.
2204 (sparc-*-nextstep*): New configuration.
2206 1995-08-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2208 * configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS.
2209 And get CFLAGS from config.h if SPECIFIED_CFLAGS is null.
2211 1995-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2213 * configure.in: Handle sunos4shr by sharing; not like sunos4*.
2214 Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment.
2216 1995-07-18 Mike Long <mike.long@analog.com>
2218 * make-dist: Fix update of finder-inf.el, and byte-compile it.
2220 1995-07-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2222 * Makefile.in (src/paths.h, paths-force):
2223 Rename src/paths.h.in to src/paths.in.
2224 (Makefile): Depend on src/Makefile.in, not src/Makefile.in.in.
2226 * configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in.
2227 Use Makefile.c for intermediate file.
2228 Rename src/config.h.in to src/config.in.
2230 1995-07-17 Richard Stallman <rms@gnu.ai.mit.edu>
2232 * configure.in (mips-dec-ultrix*): Assume version 4.3.
2233 (mips-dec-ultrix4.[12]): New alternative for old versions.
2235 1995-07-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2237 * make-dist: Don't break intra-tree links.
2239 1995-07-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2241 * configure.in: Put back archlibdir initialization. Require
2242 autoconf 2.4.1 or later.
2244 1995-07-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2246 * configure.in: Use sunos4shr normally for Sunos 4.1.[3-9].
2247 (mips-mips-riscos5*): New alternative.
2249 1995-06-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2251 * Makefile.in (uninstall, install-arch-indep): Install info/ediff*.
2253 1995-06-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2255 * configure.in (bindir, datadir, sharedstatedir, libexecdir)
2256 (mandir, infodir, archlibdir): Initializations deleted.
2258 * configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4.
2259 On hpux9shr, use hpux9shxr4.h.
2261 1995-06-24 Morten Welinder <terra+@cs.cmu.edu>
2263 * configure.in: Added target mips-dec-mach_bsd4.3.
2264 * config.guess: Guess mips-dec-mach_bsd4.3.
2266 1995-06-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2268 * Makefile.in (mkdir): Use symbolic chmod.
2270 1995-06-22 Paul Eggert <eggert@twinsun.com>
2272 * configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3.
2273 (Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.)
2275 1995-06-22 Paul Eggert <eggert@twinsun.com>
2277 * Makefile.in (SUBDIR_MAKEFILES):
2278 Add man/Makefile, so `make distclean' removes it.
2279 (top_distclean): Add config.log to the list of files to be removed.
2281 1995-06-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2283 * Version 19.29 released.
2285 1995-06-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2287 * configure.in: Fix the previous change to verify that the -b
2288 option really solves the problem.
2290 * make-dist (nt): Explicitly include makefile.nt and makefile.def only.
2292 1995-06-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2294 * configure.in: Test whether XFree86 needs -b i486-linuxaout to link.
2296 1995-06-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2298 * configure.in: Report more clearly when there is no special
2299 dir to search for X includes or libraries.
2301 1995-06-13 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2303 * configure.in: Check for -lpthreads, not -lpthread.
2305 1995-06-09 Geoff Voelker <voelker@cs.washington.edu>
2307 * make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in.
2309 1995-06-08 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2311 * configure.in: Check for -lpthread.
2313 1995-06-05 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2315 * Makefile.in (install-arch-indep): Install info files for mh-e.
2316 (uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc.
2318 1995-06-01 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2320 * configure.in (*-solaris2.5): New configuration.
2322 * make-dist: Copy new files config.nt and config.w95.
2324 1995-05-30 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2326 * configure.in: Use x_includes, not x_libraries, for -I.
2327 Make bitmapdir a colon-separated list.
2329 1995-05-27 Richard Stallman <rms@gnu.ai.mit.edu>
2331 * configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations.
2333 * configure.in: Allow x_libraries and x_includes to be paths.
2335 1995-05-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2337 * configure.in: Fix typo.
2339 1995-05-24 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2341 * INSTALL: Clarify use of site-init.el.
2343 1995-05-22 enami tsugutomo <enami@sys.ptg.sony.co.jp>
2345 * configure.in: pass arg to sqrt.
2347 1995-05-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2349 * make-dist: Fix May 6 change.
2351 1995-05-17 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2353 * vpath.sed: Delete reference to ymakefile.
2355 1995-05-09 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2357 * configure.in: Use sqrt (more portable) instead of fmod in -lm
2360 1995-05-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2362 * make-dist: Put nt/emacs.ico and nt/emacs.rc in dist.
2364 * update-subdirs: Specify /bin/sh to run the script.
2366 1995-05-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2368 * make-dist: Put src/makefile.nt in dist.
2370 * configure.in (i[345]86-*-bsdi2*): New configuration.
2371 (vax-dec-bsd386*): Deleted.
2373 1995-05-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2375 * configure.in: Make sure CDPATH doesn't mess up PWD check. Check
2376 whether X bitmaps are in X11/bitmaps instead of bitmaps. Use fmod
2377 instead of logb in -lm check.
2379 1995-05-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2381 * configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
2382 Use bsd4-3. Don't set NON_GNU_CPP.
2384 * make-dist: Don't copy in src/s/*.inp. Don't copy nt/src.
2385 In nt. copy various different things, but not *.cmd.
2386 Fix the ln commands for the subdirs of nt.
2388 1995-04-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2390 * configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h.
2392 1995-04-27 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2394 * configure.in (*-sun-sunos4.1.3*): Use shared libraries,
2395 since that's what the header file expects.
2397 1995-04-24 Francesco Potorti` (pot@cnuce.cnr.it)
2399 * configure.in (m68k-motorola-sysv*): Distinguish between 68030
2400 and 68040 based machines when choosing options for gnucc.
2402 1995-04-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2404 * Makefile.in (top_distclean): Delete config.cache.
2406 1995-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2408 * Makefile.in (install-arch-indep): Delete .#* when copying subdirs.
2410 * configure.in: Use m/ncr386.h.
2412 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2414 * Makefile.in (install-arch-indep): Undo Sep 23 change.
2416 1995-04-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2418 * make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore.
2419 (man): Don't copy texindex.c and getopt.c; they're deleted.
2420 (etc): Omit `e'; it's a subdirectory.
2421 (etc/e): Use `../..', not `..', to reference top level.
2423 1995-04-06 Simon Leinen <simon@lia.di.epfl.ch>
2425 * Makefile.in (install-arch-indep, dist):
2426 look for `update-subdir' in $(srcdir).
2428 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2430 * make-dist: Include mkinstalldirs in distribution.
2432 1995-04-05 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2434 * make-dist: Add missing close backquote.
2436 1995-04-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2438 * make-dist: Don't distribute shortnames directory.
2440 1995-03-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2442 * Makefile.in (blessmail): Pass archlibdir to the sub-make.
2444 1995-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2446 * configure.in (m88k-motorola-sysv4*): Use usg5-4-2.
2448 1995-02-23 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2450 * configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args.
2452 1995-02-13 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2454 * configure.in (mips-sgi-irix6): New configuration.
2456 1995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2458 * Makefile.in (maintainer-clean): Renamed from realclean.
2460 1995-02-02 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2462 * configure.in: Create a .gdbinit that sources the real one, if
2463 using a different build directory.
2465 1995-01-23 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2467 * configure.in: Check for sys/select.h.
2469 1995-01-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2471 * configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP.
2473 1994-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2475 * configure.in: Handle isc 4.1 operating system.
2477 1994-12-10 Richard Stallman <rms@kepa>
2479 * configure.in (rs6000-ibm-aix4.1*): New alternative.
2480 (rs6000-ibm-aix4*): New alternative.
2482 1994-12-06 Richard Stallman <rms@kepa>
2484 * configure.in: For SVR4.2, set NON_GNU_CPP if not already set.
2486 1994-11-30 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2488 * configure.in: Don't try to make directories that are guaranteed
2491 1994-11-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2493 * configure.in: Generate man/Makefile from man/Makefile.in.
2494 Create the man subdir.
2496 * Makefile.in (dvi): Run Make in our man subdir.
2498 * make-dist: Create subdir etc/e.
2500 Put man/Makefile.in in dist, instead of man/Makefile.
2502 1994-11-21 David J. MacKenzie (djm@mole.gnu.ai.mit.edu)
2504 * configure.in: Add --with-pop, --with-kerberos, and
2505 --with-hesiod for movemail.
2507 1994-11-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2509 * configure.in (m68*-apollo*): Use s/domain.h.
2511 1994-11-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2513 * configure.in (m68*-apollo*): Set NON_GNU_CPP.
2515 1994-11-14 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2517 * configure.in: Don't add -I, -L, -R options for cc if their
2518 arguments would be empty.
2520 1994-11-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2522 * configure.in (i860-intel-osf1*): New alternative.
2523 (mips-sgi-irix5.[01]*): Distinguish from irix5*.
2524 (mips-sgi-irix*): Now an alias for mips-sgi-irix5*.
2526 1994-11-09 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2528 * configure.in: Make h_errno check not use nested functions.
2530 1994-11-09 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2532 * Makefile.in (install-arch-indep): Delete *.orig in copied dirs.
2534 1994-11-08 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
2536 * Makefile.in (install-arch-indep): Avoid continued comment
2537 swallowing target line.
2539 1994-11-08 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu)
2541 * configure.in: Protect a character class with `changequote'.
2543 1994-11-07 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2545 * configure.in: Accept `news' as a synonym for `newsos'.
2547 1994-11-03 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2549 * Makefile.in: Don't rm files if cd fails.
2551 1994-11-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2553 * make-dist: Put nt subdir and its subdirs in the dist.
2554 (lib-src): Put makefile.nt in the dist.
2555 (lisp): Put makefile.nt in the dist.
2557 1994-10-29 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2559 * configure.in: Change a stray `[' to `test'.
2561 1994-10-28 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2563 * configure.in: Adapt for Autoconf v2. Use the standard argument
2564 parser, host type canonicalizer, X11 finder, and message
2565 printing macros. Use the new macro names. Use `test' instead of `['.
2567 1994-10-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2569 * configure.in: Check for getpagesize.
2571 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2573 * make-dist (msdos): Put sed* in the distribution.
2575 1994-10-17 Morten Welinder <terra@mole.gnu.ai.mit.edu>
2577 * config.bat: New option, `--with-x', for configuring Emacs
2578 for use with the X11 system DesqView/X.
2579 New option, `--no-debug', for compiling Emacs without debug
2580 information thus saving disk space.
2581 (src/config.h, src/paths.h): Use `update' (which is like
2582 `move-if-changed') to change the file.
2583 (src/config.h): When configuring for X11 perform extra changes.
2584 (src/makefile): When configuring for X11 perform extra changes.
2585 (lib-src): Remove temporary files.
2586 (): Check that `sed', `rm', `mv', and `gcc' are available.
2588 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2590 * Makefile.in (sharedstatedir): Substitute sharedstatedir properly.
2592 * configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps.
2594 1994-10-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2596 * configure.in (EMACS_CONFIGURATION): Use $canonical as value.
2598 * configure.in (canonical): Substitute var into makefiles.
2599 (bitmapdir): Likewise.
2601 * Makefile.in (bitmapdir): New variable.
2602 (src/paths.h, paths-force): Edit PATH_BITMAPS.
2604 1994-10-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2606 * make-dist: Put update-subdirs and lisp/subdirs.el in the dist.
2608 * Makefile.in (dist, install-arch-indep): Run update-subdirs.
2609 * update-subdirs: New shell script.
2611 1994-10-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2613 * Makefile.in (top_distclean): Don't rm build-install.
2614 (SOURCES): Delete build-install.in.
2616 * make-dist: Don't distribute build-ins.in.
2617 * build-ins.in: File deleted.
2619 1994-10-12 David J. MacKenzie (djm@duality.gnu.ai.mit.edu)
2621 * Makefile.in (mkdir): Use mkinstalldirs instead of make-path.
2623 1994-10-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2625 * Makefile.in: Use libexecdir and sharedstatedir as appropriate.
2627 * configure.in (libexecdir): Renamed from libdir. New default.
2628 (sharedstatedir): Renamed from statedir. New default.
2629 (datadir): New default.
2631 * make-dist: Don't distribute subdirs.el.
2633 1994-10-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2635 * configure.in (eaccess): Check for it.
2637 1994-10-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2639 * configure.in (mktime): Check for it.
2641 1994-10-02 Paul Reilly <pmr@geech.gnu.ai.mit.edu>
2643 * configure.in (motif): Add support for usage and option checking.
2645 1994-09-24 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2647 * configure.in (utimes): Check for it.
2649 1994-09-23 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2651 * Makefile.in (install-arch-indep): Don't do mkdir here.
2653 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2655 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2656 riscix.h renamed to acorn.h.
2658 1994-09-21 Michael Ben-Gershon (mybg@cs.huji.ac.il)
2660 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2663 1994-09-21 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2665 * configure.in: Remove trailing slashes from srcdir.
2667 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2669 * configure.in (i[345]86-sequent-ptx*): Handle
2671 1994-09-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2673 * Makefile.in (paths-force): Depend on src/paths.h
2675 1994-09-19 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2677 * configure.in (config_options): Save all arguments, not just some.
2679 1994-09-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2681 * Makefile.in (install-arch-indep): Copy DOC-*, not DOC*
2683 * configure.in: Add AC_AIX.
2684 Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT.
2686 1994-09-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2688 * configure.in (parsing options): Simplify sed command to delete -'s.
2690 1994-09-16 Karl Heuer <kwzh@churchy.gnu.ai.mit.edu>
2692 * configure.in (config_options): New shell variable.
2693 Pass its value to C code in EMACS_CONFIG_OPTIONS.
2695 1994-09-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2697 * configure.in (alpha-dec-osf*): New target.
2699 * Makefile.in: Use just one FRC target.
2701 1994-09-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2703 * Makefile.in (removenullpaths, paths-force):
2704 Use name paths.h.tmp$$, which depends on the pid.
2706 1994-09-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2708 * Makefile.in (removenullpaths, paths-force):
2709 Put paths.h.tmp in top-level dir, not in src.
2711 1994-09-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2713 * Version 19.27 released.
2715 1994-09-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2717 * Version 19.26 released.
2719 1994-09-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2721 * configure.in: Check for lrand48, not rand48.
2723 1994-09-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2725 * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5)
2726 (powerpc-ibm-aix*): New aliases.
2728 1994-08-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2730 * make-dist (src/m, src/s): Put *.inp in distribution.
2732 1994-08-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2734 * configure.in: Accept i586 and i486 along with i386.
2736 1994-08-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2738 * configure.in: Do compute unexec, LIBX, system_malloc, etc
2739 even if CPP env var was set by the user.
2741 * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value.
2743 1994-08-14 Jonathan I. Kamens (jik@gza-client1.aktis.com)
2745 * Makefile.in: Uninstall "$(EMACS)", not "emacs".
2747 1994-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2749 * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP.
2751 1994-08-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2753 * configure.in: Check more specifically for i*86-sun-sunos.
2755 1994-08-03 Caveh Jalali (caveh@eng.sun.com)
2757 * configure.in: Handle solaris 2.4.
2759 1994-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2761 * configure.in (rand48): Check for it.
2763 1994-07-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2765 * make-dist: Update the info files.
2767 1994-07-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2769 * configure.in: Make "checking..." messages' style consistent.
2770 (HAVE_H_ERRNO): New test.
2772 1994-07-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2774 * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP.
2776 1994-07-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2778 * configure.in (CFLAGS): If the envvar was specified, use that.
2779 And set REAL_CFLAGS from it too.
2781 1994-07-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2783 * make-dist: Update finder-inf.el.
2785 1994-07-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2787 * make-dist (msdos): Include sed4.inp in dist.
2789 * Makefile.in (libsrc_libs): Var deleted.
2791 1994-07-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2793 * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands.
2795 1994-06-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2797 * configure.in (mips-sony-newsos4*): New alias.
2799 1994-06-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2801 * configure.in (*-convex-bsd*): Set NON_GNU_CPP.
2802 (*-convex-convexos*): Accept this as alias.
2804 1994-06-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2806 * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE,
2807 for two different uses.
2809 1994-06-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2811 * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc.
2813 1994-06-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2815 * make-dist: Put ./BUGS into the distrib.
2817 1994-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2819 * configure.in: Handle 386 running Solaris 2.
2821 1994-06-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2823 * configure.in (mips-siemens-sysv*): Use cpp, not cc -E.
2825 1994-06-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2827 * configure.in (mips-sony-newsos*): Use news-risc.h.
2829 * configure.in: Accept bsdi as opsys, like bsd386.
2831 1994-06-01 Morten Welinder (terra@diku.dk)
2833 * config.bat (src/paths.h): Use sed script msdos/sed4.inp.
2835 1994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2837 * Version 19.25 released.
2839 * make-dist (shortversion): Don't assume another period follows.
2841 1994-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2843 * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd.
2844 (uninstall): Use /bin/pwd.
2846 * Makefile.in (blessmail): Depend on src.
2847 (all): Don't depend on blessmail.
2849 * Makefile.in (src/paths.h): Don't force recomputation.
2850 (paths-force): New target; force recomputation of paths.h.
2851 (all): Depend on paths-force.
2852 (src, lib-src): Depend on src/paths.h.
2854 * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS,
2855 NON_GCC_TEST_OPTIONS.
2857 1994-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2859 * configure.in: Don't insist on subversions for irix.
2861 1994-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2863 * configure.in (hppa*-hp-hpux9shr): Move alternative up.
2865 * configure.in (i[34]86-next-*): New alternative.
2867 1994-05-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2869 * Version 19.24 released.
2871 * configure.in: New config hppa*-hp-hpux9shr*.
2873 1994-05-22 Morten Welinder (terra@tyr.diku.dk)
2875 * config.bat: Doc fix.
2877 1994-05-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2879 * Makefile.in (mostlyclean, clean, distclean, realclean)
2880 (extraclean): Don't act on man subdir if it doesn't exist.
2882 1994-05-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2884 * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars.
2885 Use them to set up CC.
2886 (*-sun-sunos4.1.3): Set them.
2888 1994-05-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2890 * Makefile.in (lib-src): Don't depend on src/paths.h.
2892 1994-05-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2894 * build-ins.in (copydests): Get rid of spurious `-'s.
2896 * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION.
2898 1994-05-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2900 * Version 19.23 released.
2902 * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS
2903 for the Xlib and Xt checks; then restore old CFLAGS.
2905 1994-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2907 * configure.in (HAVE_X11XTR6): Add newline before #if.
2908 Add newline after #endif.
2910 1994-05-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2912 * configure.in (HAVE_X11XTR6): Arrange to define it.
2914 1994-05-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2916 * Makefile.in (install): Depend on blessmail.
2918 1994-05-12 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2920 * configure.in (mips-siemens-sysv*): Put quotes around value
2923 1994-05-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2925 * Makefile.in (TAGS): Use the makefile in src subdir.
2927 1994-05-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2929 * configure.in (opsys): Recognize `gnu'.
2931 1994-05-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2933 * configure.in (using NON_GNU_CPP): Fix test for CPP already set.
2935 1994-05-09 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2937 * configure.in: Remove AC_LANG_C call. Not needed with Autoconf
2940 1994-05-08 Morten Welinder (terra@diku.dk)
2942 * config.bat: Forcibly remove "# " style comments from makefiles.
2944 1994-05-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2946 * Makefile.in (uninstall): When processing lispdir and etcdir,
2947 do nothing unless it exists and is a directory.
2949 1994-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2951 * Makefile.in (install-arch-indep): Do install info/dired-x*.
2952 Merge code in from install-doc.
2953 (install-doc): Merge code back into install-arch-indep.
2954 (install-arch-dep): Don't depend on install-doc.
2956 * configure.in (run_in_place): Don't use pwd for archlibdir and docdir.
2958 1994-05-04 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2960 * configure.in (making src/Makefile and lib-src/Makefile):
2961 Split off the autoconf substitutions and don't pass them thru cpp.
2962 (undefs): Use $canonical as well as $configuration.
2964 * make-dist: Distribute lisp/Makefile.
2966 * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*.
2967 Use lower case names for the s files.
2969 1994-05-03 Morten Welinder (terra@diku.dk)
2971 * config.bat: Added possibility for different file name
2972 transscriptions in lib-src.
2974 1994-05-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2976 * Makefile.in (lib-src): Undo previous change.
2977 (blessmail): New target to run maybe-blessmail in lib-src.
2978 (all): Depend on blessmail.
2980 * Makefile.in (lib-src): Depend on src.
2982 1994-04-30 Paul Reilly (pmr@churchy.gnu.ai.mit.edu)
2984 * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3.
2985 (m88k-dg-dgux5.4R2): dgux5.4R2.
2987 1994-04-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2989 * configure.in (window_system): Restore accidentally deleted code
2990 that uses AC_FIND_X.
2992 * make-dist: Distribute config.bat.
2994 1994-04-29 Morten Welinder (terra@diku.dk)
2996 * config.bat: Corrected the configuration of lib-src
2997 to keep up with configure. Add note about dos version 3
2998 or better needed (djgpp needs that). Add note explaining
2999 that either install in c:/emacs or edit the script.
3000 Don't change to c:/emacs, but assume we're there (to minimize
3001 the number of places to change).
3003 * config.bat: Build-in the first step towards X11 support with
3004 the X11 emulator that exists. At this time it won't work,
3005 and several files are missing.
3007 1994-04-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3009 * configure.in: Use m/hp800.h in place of m/hp9000s800.h.
3010 Don't look for -lresolv.
3012 * Makefile.in (lib-src): Depend on src/paths.h.
3014 1994-04-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3016 * configure.in: Restore deleted AC_SUBST of `configuration'.
3017 Improve error message for bad --with-x-toolkit value.
3019 * configure.in: Define CONFIGURATION in src/config.h
3020 rather than substituting in src/Makefile.in.
3022 1994-04-26 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3024 * Makefile.in (install-doc): New target.
3025 (install-arch-dep): Depend on install-doc.
3026 (mkdir): Create docdir.
3028 1994-04-22 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3030 * configure.in: Test for libresolv.a.
3031 Substitute machfile and opsysfile.
3033 1994-04-22 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3035 * Makefile.in (.PHONY, install): Kill reference to obsolete do-install.
3036 (install-arch-dep): Install under the name $(EMACS).
3038 1994-04-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3040 * configure.in (version): Use entire value of emacs-version.
3041 (mips-siemens-sysv*): New alternative.
3043 1994-04-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3045 * Makefile.in (install-arch-indep): Don't install dired-x*.
3047 1994-04-18 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3049 * configure.in (src/Makefile, lib-src/Makefile): Delete ^L.
3050 Fix definition of $undefs.
3052 1994-04-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3054 * configure.in (window_system): Obey --with-x11=no and --with-x10=no.
3056 * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I.
3058 1994-04-16 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
3060 * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE.
3062 1994-04-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3064 * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in
3065 and run it thru cpp, as with src/Makefile.in.
3067 * configure.in: Use AC_SET_MAKE.
3069 1994-04-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3071 * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2.
3073 1994-04-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3075 * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@.
3077 * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes.
3078 (printing the choices): Make the toolkit message unconditional.
3079 (USE_X_TOOLKIT): Use `none', not `no', if none.
3080 (include libsrc_libs): Include config.h, and specify -I for srcdir.
3081 Get rid of temp file foofoo1.
3083 1994-04-13 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3085 * configure.in (CFLAGS): Use shell syntax, not Makefile.
3087 1994-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3089 * configure.in (window_system): If no X, set USE_X_TOOLKIT=no.
3090 (printing the choices): State choice of toolkit.
3091 (libsrc_libs): Recalculate after writing config.h;
3092 then update lib-src/Makefile.
3094 1994-04-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3096 * configure.in: Add sunos4shr as alternative for suns.
3097 Conditionals testing for null $CC were backwards.
3099 1994-04-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3101 * make-dist (msdos): Don't link patch1. Link sed*.inp, not sed.in*.
3103 1994-04-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3105 * configure.in: Handle -isc4.0*.
3107 1994-03-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3109 * configure.in (esix5): Set NON_GNU_CPP.
3111 1994-03-24 Roland McGrath (roland@mole.gnu.ai.mit.edu)
3113 * Makefile.in (thisdir): Nonsensical variable removed.
3114 (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd
3115 back to $thisdir, rather than the directory `this_dir'.
3117 1994-03-17 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3119 * Makefile.in (install-arch-indep): Add missing backslash after a
3122 1994-03-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3124 * Makefile.in (thisdir): New variable.
3125 (install-arch-indep): Go back to thisdir to run INSTALL_DATA.
3127 1994-03-08 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3129 * configure.in: Add freebsd.
3131 1994-03-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3133 * configure.in: Check for fpathconf.
3135 1994-03-02 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3137 * configure.in (with_x_toolkit): Fix typo in previous change.
3139 1994-03-01 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3141 * configure.in: New s-file for rs60000-ibm-aix3.2.5.
3143 1994-02-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3145 * configure.in (with_x_toolkit): Don't allow motif or open-look.
3147 1994-02-24 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3149 * configure.in: Fix value of docdir.
3150 * Makefile.in (install-arch-indep): Install DOC* in docdir.
3152 1994-02-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3154 * configure.in (*-sysv4.1): Set NON_GNU_CPP.
3156 1994-02-22 Karl Heuer (kwzh@geech.gnu.ai.mit.edu)
3158 * configure.in: New variable docdir to control where the docstring
3160 Makefile.in: Use it to initialize PATH_DOC in paths.h.
3162 1994-02-22 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3164 * configure.in: When --run-in-place, don't inherit archlibdir.
3166 1994-02-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3168 * Makefile.in (install-arch-dep, install-arch-indep):
3169 New targets split up former do-install rule.
3170 (do-install): Target deleted.
3172 1994-02-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3174 * configure.in (mips-sony-newsos*): New configuration.
3176 1994-02-14 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu)
3178 * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
3180 1994-02-11 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3182 * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX.
3184 1994-02-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3186 * configure.in: Don't initialize CC.
3188 1994-02-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3190 * configure.in (creating src/Makefile): Also generate -U switches
3191 for symbols in the $configuration value.
3193 * configure.in: Check for sys_siglist being declared in system header.
3195 1994-02-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3197 * configure.in (creating src/Makefile): Delete blank lines
3198 along with lines of whitespace.
3199 (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value.
3201 1994-02-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3203 * configure.in: Get, use, and substitute C_SWITCH_MACHINE
3204 like C_SWITCH_SYSTEM.
3205 (m68*-motorola-sysv*): Set CC. Require cpu type to be m68k or m68000.
3207 1994-02-04 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3209 * configure.in (drem): Check for this function.
3211 1994-02-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3213 * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces.
3214 If CPP was inherited from environment, don't use NON_GNU_CPP.
3215 (NON_GNU_CC): Likewise.
3216 (handling with_gcc): Use explicit if in the `no' case.
3217 (cc_specified): New variable; if set, don't use NON_GNU_CC.
3219 1994-02-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3221 * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP.
3223 1994-02-01 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3225 * configure.in: Check whether fmod exists.
3227 1994-01-31 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3229 * make-dist: Distribute {src,lisp}/ChangeLog.? instead of
3230 {src,lisp}/OChangeLog.
3232 1994-01-22 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3234 * configure.in: Restore Jan 8 and Jan 16 changes. The -U hack is
3235 necessary for proper operation. This code works with the current
3236 released version of Autoconf.
3238 1994-01-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3240 * configure.in (with_x_toolkit): Treat values athena and lucid alike.
3241 (USE_X_TOOLKIT): Define it for all values except `no'.
3243 * configure.in: Undo first Jan 8 change and Jan 16 change.
3245 1994-01-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3247 * configure.in: Handle --with-x-toolkit. Produce lwlib/Makefile.
3248 Substitute USE_X_TOOLKIT as both C macro and Make variable.
3250 * Makefile.in (lwlib/Makefile): New target.
3251 (SUBDIR_MAKEFILES): Depend on lwlib/Makefile.
3252 (clean, mostlyclean, distclean, realclean): Handle lwlib subdir.
3253 (unlock, relock): Handle lwlib subdir.
3255 * Makefile.in: Add some .PHONY targets.
3257 * make-dist: Handle lwlib subdir like oldXMenu subdir.
3259 * lwlib: New subdirectory.
3261 1994-01-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3263 * configure.in: If CPP has a value that is a directory,
3266 1994-01-16 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3268 * configure.in (srcdir_undefs): Add g flag to sed substitution to
3271 1994-01-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3273 * Makefile.in (do-install): Install the dired-x info files.
3275 * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX.
3278 1994-01-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3280 * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs.
3282 1994-01-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3284 * configure.in (creating src/Makefile): Put code inside 2nd arg to
3285 AC_OUTPUT as it should be; hopefully noone will again see fit to
3286 gratuitously break this and not make a change log entry.
3287 Optimized sed processing of Makefile.in and cpp output; now
3288 preserves comments previously removed from the cpp input.
3289 Eliminated temp file for cpp output. Generate -U switches to
3290 undefine all identifiers that appear in the directory name
3291 ${srcdir}; pass these to cpp.
3293 * configure.in (version): Fix sed regexp to match two-elt version
3296 * configure.in: Check for strerror.
3298 1994-01-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3300 * configure.in: Test for bcmp.
3302 1994-01-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3304 * make-dist (tempdir): Put subdir msdos into the distribution.
3306 1993-01-07 Morten Welinder (terra@diku.dk)
3308 * config.bat: New file.
3310 1994-01-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3312 * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS.
3314 1994-01-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3316 * configure.in (m68*-next-*): Don't care about which os is specified.
3317 (i[34]86-*-*): Check for *-nextstop*.
3319 1993-12-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3321 * configure.in: Check for setsid.
3323 1993-12-17 Richard Stallman (rms@srarc2)
3325 * configure.in (*-sun-solaris*): Add special case for Solaris 2.3.
3327 1993-12-15 Richard Stallman (rms@srarc2)
3329 * Makefile.in (mkdir): Make only the lockdir writable.
3331 * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
3333 1993-12-11 Richard Stallman (rms@srarc2)
3335 * Makefile.in (libdir): Use @libdir@.
3337 1993-12-08 Richard Stallman (rms@srarc2)
3339 * Makefile.in (install): Add empty command.
3341 1993-12-04 Richard Stallman (rms@srarc2)
3343 * make-dist: Put man/getopt.c in the dist.
3345 * configure.in (LIBS): Add test for existence of XSetWMProtocols.
3347 * Makefile.in (install): Depend on ${SUBDIR}, not `all'.
3349 1993-12-03 Richard Stallman (rms@srarc2)
3351 * configure.in (solaris): Set NON_GNU_CPP instead of CPP.
3352 Set it for all solaris versions.
3353 (mips-mips-riscos4*): Set NON_GNU_CC, not CC.
3354 (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP.
3355 Likewise for NON_GNU_CC and CC.
3357 1993-12-01 Richard Stallman (rms@srarc2)
3359 * configure.in (mips-mips-riscos4*): Assign variable CC.
3360 (checking ${with_gcc}): If "no", don't override CC if already set.
3361 (CC): Initialize it as empty.
3363 1993-11-30 Richard Stallman (rms@srarc2)
3365 * configure.in (Suns): Set CPP if *-solaris2.3*.
3367 1993-11-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3369 * Version 19.22 released.
3371 * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs.
3373 1993-11-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3375 * make-dist: When breaking links, use cp -p.
3376 Copy install.sh into distribution.
3377 Move the temp dir up into the parent dir;
3378 don't leave the staging dir make-dist.tmp... in existence.
3379 * install.sh: New file.
3381 1993-11-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3383 * configure.in (i[34]86-ncr-sysv*): New specific alternative.
3385 1993-11-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3387 * configure.in (version): When --run-in-place, exclude
3388 ${datadir}/emacs/site-lisp from locallisppath.
3390 1993-11-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3392 * configure.in: Delete jumk.c before writing it.
3394 1993-11-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3396 * Version 19.21 released.
3398 * Makefile.in (mkdir): Ignore error from chmod.
3400 1993-11-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3402 * make-dist: Don't put lisp/forms.README in the distribution.
3404 1993-11-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3406 * configure.in (creating src/Makefile): Before running cpp,
3407 discard all lines that start with `# Generated' or /**/#.
3409 1993-11-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3411 * Version 19.20 released.
3413 * make-dist: Use build-ins.in, not build-install.in.
3414 Don't bother updating TAGS since it's not included.
3416 * build-ins.in: Renamed from build-install.in.
3418 1993-11-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3420 * make-dist: Don't try to link *.texinfo--there are none now.
3421 When running make in lib-src, specify YACC var value.
3423 1993-10-03 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3425 * configure.in (extrasub): Add vpath patterns for %.[yls].
3427 * configure.in: Don't do seddery on config.status after AC_OUTPUT.
3428 Instead just include the commands to make src/Makefile as the
3429 second arg to AC_OUTPUT.
3431 * configure.in: Use : instead of dnl for comment inside
3434 * configure.in: No longer use vpath_sed. Instead, when we notice
3435 srcdir already configured, set extrasub to hack vpath in the
3438 * configure.in: In cmds to make src/Makefile, chmod Makefile.new
3440 * Makefile.in (VPATH): Define to @srcdir@.
3442 1993-09-28 Brian Fox (bfox@cubit)
3444 * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
3445 doesn't exist. Just copy src/Makefile.in instead. Touch
3446 all of the Makefiles after editing config.status.
3448 * INSTALL: Update documentation to match new configuration
3451 1993-09-27 Brian Fox (bfox@ai.mit.edu)
3453 * configure.in: Allow any of the path or directory Makefile
3454 variables to be set with flags to configure. Create all Makefiles
3455 at configure time. Edit special commands into config.status after
3456 src/Makefile.in is built from src/Makefile.
3458 * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile):
3459 If these files are out of date, simply have config.status
3460 rebuild them; don't rebuild them explicitly.
3462 1993-09-25 Brian Fox (bfox@ai.mit.edu)
3464 * build-install.in: Change src/xemacs to src/emacs. We no longer
3465 create src/xemacs, so the file wouldn't be found.
3467 * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'.
3469 1993-09-24 Brian Fox (bfox@albert.gnu.ai.mit.edu)
3471 * configure.in: Avoid forcing the search of /usr/include before
3472 fixed include files by resetting C_SWITCH_X_SITE if it is
3475 1993-09-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3477 * Makefile.in (@rip_paths@locallisppath):
3478 Delete ${datadir}/emacs/site-lisp.
3480 1993-09-15 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3483 Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value.
3484 Remove ${extra_output} from AC_OUTPUT call.
3486 1993-09-17 Brian Fox (bfox@inferno)
3488 * make-dist: Quote backquotes found in strings to be echoed.
3490 * configure.in: Use "sh -c pwd" when we want to avoid having the
3491 shell fix up the value of $PWD.
3493 1993-09-13 Brian Fox (bfox@inferno)
3495 * Makefile.in (do-install): Don't abort if ln or chmod at the end
3496 of the installation fail. Suggested by Karl Berry.
3498 1993-08-30 Brian Fox (bfox@inferno)
3500 * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make"
3501 was used. Set MAKEFLAGS from MFLAGS.
3503 1993-09-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3505 * configure.in: Test for res_init in libc.
3507 1993-09-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3509 * configure.in: In the file ${tempcname}, use configure___
3510 instead of @configure@.
3512 1993-09-12 Roland McGrath (roland@sugar-bombs.gnu.ai.mit.edu)
3514 * make-dist: Dist vpath.sed
3516 * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile):
3517 Depend on vpath.sed.
3518 Replace sed comand for VPATH with @vpath_sed@.
3520 * configure.in: Substitute variable `vpath_sed'.
3521 If not in $srcdir and $srcdir is configured,
3522 issue warning that GNU make is required,
3523 and set vpath_sed to use vpath.sed script.
3525 1993-09-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3527 * configure.in: Remove check for $srcdir being configured. This
3528 pretty much works now.
3529 Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
3530 Check for XFree86 (/usr/X386/include) independent of whether
3533 * Makefile.in (info, dvi, clean, mostlyclean, distclean,
3534 realclean, unlock, relock): Use `$(MAKE)' in place of plain
3537 1993-08-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3539 * Version 19.19 released.
3541 * configure.in (i386-*-sunos4): Assume Sunos 4.0.
3543 1993-08-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3545 * configure.in: Check for XScreenNumberOfScreen.
3547 1993-08-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3549 * configure.in: Add * to end of all configuration alternatives.
3550 (m68*-sony-newsos3*): New alternative.
3552 1993-08-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3554 * make-dist: Include getdate.c in distribution.
3556 * configure.in: For --help, use $PAGER if it is set.
3557 (LIB_X11_LIB): Default to -lX11.
3558 (mips-sgi-irix5.*): New alternative.
3560 * Makefile.in (do-install): Install info/gnus* and info/sc*.
3562 * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*):
3563 Recognize *.B8.* as hpux version 8.
3564 (m68*-tektronix-bsd*): Fix typo in tek4300.
3565 (AC_HAVE_FUNCS): Add ftime.
3567 1993-08-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3569 * configure.in (m88k-tektronix-sysv3*): Added the missing *.
3570 Use tekxd88, not tekXD88.
3572 1993-08-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3574 * configure.in: Check for -lm. Then can check for frexp and logb.
3576 1993-08-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3578 * Version 19.18 released.
3580 * make-dist (src): Don't put gnu-hp300 in dist.
3581 (src, lisp): Include OChangeLog in dist.
3583 1993-08-08 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3585 * configure.in: Test for presence of logb and frexp functions.
3587 1993-08-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3589 * configure.in (machine): Add i370-ibm-aix*.
3591 1993-08-03 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3593 * configure.in (function checks): Test for mkdir and rmdir.
3595 * configure.in (function checks): Don't test for random and bcopy
3596 only when we're building with X; look for them all the time.
3598 1993-07-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3600 * configure.in: Test for availability of bcopy functions, searching
3601 the X libraries if we're using X.
3603 * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp,
3604 and #define HAVE_AIX_SMT_EXP if we do. This is present in some
3605 versions of AIX, and needs to be passed to the loader.
3607 * configure.in: Test for the availablility of the
3608 XScreenResourceString function.
3610 1993-07-30 David J. MacKenzie (djm@frob.eng.umd.edu)
3612 * configure.in: If we found X on our own, set C_SWITCH_X_SITE and
3613 LD_SWITCH_X_SITE and assume --with-x11.
3614 Only look for X11 files if we weren't told about a window system
3615 or if we were told to use X11 but not told where.
3616 Search the libraries from the s and/or m files when checking for
3619 * configure.in: Remove any trailing slashes in prefix and exec_prefix.
3621 1993-07-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3623 * make-dist: Include lisp/dired.todo in the distribution.
3625 1993-07-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3627 * configure.in: Add code to set HAVE_INET_SOCKETS.
3629 1993-07-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3631 * configure.in: If we do find x_includes and x_libraries
3632 via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE.
3634 1993-07-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3636 * make-dist: Include src/gnu-hp300 in the dist.
3638 * configure.in (canonical): New variable holds the canonicalized
3639 configuration. Don't alter `configuration'. Use `configuration'
3640 for Makefile.in for file naming.
3641 (testing x_includes and x_libraries): Use =, not ==.
3643 1993-07-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3645 * Version 19.17 released.
3647 * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src
3648 directory's makefile. This allows the invocation of CPP which
3649 builds xmakefile to receive these switches. The SunSoft C
3650 preprocessor inserts spaces between tokens if it doesn't get the
3651 -Xs flag requested in src/s/sol2.h.
3653 1993-07-12 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
3655 * configure.in (m68k-bull-sysv3): new config.
3657 1993-07-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3659 * configure.in: Use the autoconf AC_FIND_X macro to try to find
3660 the X Windows libraries.
3662 1993-07-07 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3664 * make-dist (tempdir): Don't create lisp/forms-mode directory in
3665 the distribution. Those files aren't kept in their own
3666 subdirectory any more.
3668 1993-07-06 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3670 * Version 19.16 released.
3672 1993-06-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3674 * configure.in: Add --verbose flag.
3676 1993-06-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3678 * version 19.15 released.
3680 1993-06-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3682 * Makefile.in (top_distclean): Use -f switch when cleaning out
3683 lock dir; it might be empty.
3685 * configure.in: Only check for -lXbsd once.
3687 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3689 * Version 19.14 released.
3691 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3693 * make-dist: If using gzip, create distribution with '.gz' extension.
3695 * make-dist (lisp/term): This doesn't have a ChangeLog anymore.
3696 (lisp/forms-mode): This doesn't exist anymore.
3698 * configure.in: Look for the closedir function.
3700 1993-06-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3702 * configure.in (CPP): Autoconf sets this to a shell variable
3703 reference, which doesn't work when it's edited into a makefile.
3704 Expand that variable reference.
3706 * Makefile.in (CPP): New variable.
3707 (src/Makefile): Edit CPP into src/Makefile.
3709 * Makefile.in (src/Makefile): Don't bother exiting single quotes
3710 and entering double quotes to get the values of LD_SWITCH_X_SITE
3711 and the other make variables; make substitutes them in anyway.
3713 * Makefile.in (uninstall): Don't remove the lisp and etc
3714 directories if they're in the source tree.
3716 Bring mumbleclean targets into conformance with GNU coding standards.
3717 * Makefile.in (mostlyclean, clean): Separate these two; just have
3718 them pass the request to the subdirectory makefiles.
3719 (distclean): Pass the request down, and then get rid of the
3720 files configure built, and get rid of the Makefiles.
3721 (realclean): Pass the request down, and then do the same things
3723 (uninstall, info, dvi): New targets.
3725 * configure.in: Move clause for PC-compatible i386 box to the end
3726 of the case statement, to avoid masking configurations below.
3728 * configure.in: Add case for m88k-motorola-sysv4.
3730 * configure.in: Add support for HP/UX versions 7, 8, and 9 on
3731 the HP 68000 machines.
3733 * configure.in: Put the arguments to LD_SWITCH_X_SITE's and
3734 C_SWITCH_X_SITE's -L and -I switches in quotes, so the
3735 preprocessor won't fiddle with them.
3737 1993-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3739 * Makefile.in (TAGS): cd to src to run etags.
3741 1993-06-12 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3743 * configure.in (version): Check the X libraries for XrmSetDatabase
3744 and random, and see if we have -lXbsd.
3746 1993-06-11 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3748 * configure.in: Pass "-Isrc" to the CPP we run to examine the
3749 s/*.h and m/*.h files. Martin Tomes
3750 <mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it.
3752 1993-06-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3754 * configure.in: Move i386-prime-sysv* and i386-sequent-bsd*
3755 above the general i386 alternative.
3757 1993-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3759 * configure.in: Recognize configuration name for Data General
3762 * configure.in: Use AC_LONG_FILE_NAMES.
3764 1993-06-09 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3766 * configure.in: Test for bison.
3767 * Makefile.in (YACC): New variable.
3768 (lib-src/Makefile.in): Edit YACC into the makefile.
3770 1993-06-08 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3772 * Version 19.13 released.
3774 * configure.in (CFLAGS): Don't set this according to the value of
3775 the GCC shell variable. Instead, consult the machine and system
3776 files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and
3777 test __GNUC__ while we're at it.
3779 * configure.in: Remove extra ;; from hpux cases.
3781 1993-06-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3783 * configure.in: Check to see if the system has -ldnet.
3785 1993-06-08 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3787 * make-dist: Add clauses to distribute lisp/forms-mode.
3789 1993-06-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3791 * configure.in (machine): Fix the versions in hpux version number test.
3792 Do not guess based on cpu type. Do check for explicit system version.
3794 1993-06-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3796 * configure.in: Do NOT look for `unknown' as company name.
3798 1993-06-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3800 * configure.in: Fix typo in message.
3802 1993-06-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3804 * Version 19.12 released.
3806 * Makefile.in (do-install): Correct previous etc-copying change.
3807 Partially rewrite using `if'.
3808 (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE.
3810 * Version 19.11 released.
3812 * configure.in: Handle 386bsd.
3814 1993-05-31 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3816 * make-dist: Update getdate.c.
3818 * configure.in: Handle bsd386.
3820 * Makefile.in (do-install): Use `-' in tar options.
3822 * configure.in: Change ! "${...}" to x"${...}" = x.
3824 * Makefile.in (do-install): Copy the DOC-* files from the build
3825 etc directory, as well as lots of things from ${srcdir}/etc.
3827 * make-dist: Copy config.guess.
3829 * configure.in: Handle AIX versions 1.2, 1.3.
3831 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3833 * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add
3834 the configuration name mips-mips-usg* to represent USG systems.
3836 * configure.in: Fix logic to detect if srcdir is already configured.
3838 * Makefile.in: Pass in LD_SWITCH_X_SITE.
3840 * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd
3841 foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name
3842 of a directory; cd might fail, and have pwd print out the current
3845 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3847 * configure.in: When looking for sources, use '.', not `.`. Also '..'.
3849 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3851 * configure.in: Complain if srcdir points at an already-configured
3854 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3856 * Version 19.10 released.
3858 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3860 * Makefile.in: Use Makefile comments, not C comments.
3862 * configure.in: Add case for the Tektronix XD88.
3864 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3866 * configure.in: Handle sysv4.2 and sysvr4.2.
3868 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3870 * configure.in: Traverse the argument list without destroying it;
3871 don't use shift. It turns out that "set - ${saved_arguments}"
3872 doesn't work portably.
3874 * configure.in: Add missing "fi".
3876 * make-dist: Rebuild configure if configure.in is newer.
3878 * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src
3879 targets to be executed even if make remembers that it has already
3882 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3884 * Makefile.in (do-install): Delete redundant code to copy etc twice.
3886 * configure.in (romp): Handle various version numbers with aos and bsd.
3888 1993-05-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3890 * configure.in: Fix message text.
3892 1993-05-28 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3894 * make-dist: Make a `site-lisp' directory in the distribution,
3895 instead of a `local-lisp' directory, which hasn't been the
3896 appropriate name for a long time.
3897 * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory
3898 from the distribution first, then /usr/local/lib/emacs/site-lisp.
3900 * Makefile.in (do-install): Correctly detect if ./etc and
3901 ${srcdir}/etc are the same.
3903 * configure.in: Extract UNEXEC from the system configuration
3904 files, compute the name of the source file corresponding to the
3905 object file, and #define it as UNEXEC_SRC in config.h.
3907 * configure.in: If srcdir is '.', then try using PWD to make it
3910 * configure.in: Include ${srcdir} in the printed report, to help
3911 people notice if it's an automounter path.
3913 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3915 * configure.in (prefix): Don't run pwd on srcdir unnecessarily.
3917 1993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3919 * Makefile.in (do-install): Delete the dest dir, not the source dir,
3920 when they are different. Add `shift' command.
3921 (COPYDESTS, COPYDIR): Delete external-lisp dir.
3922 (externallispdir): Var deleted.
3924 * configure.in: Delete spurious paren outputting short_usage.
3926 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3928 * Version 19.9 released.
3930 1993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3932 * Makefile.in (${SUBDIR}): Pass the value of the make variable to
3935 * make-dist: Check for .elc files with no corresponding .el file.
3937 * Makefile.in (mkdir): Make all the directories in locallisppath.
3939 * config.guess: New file.
3940 * configure.in: Use it, tentatively.
3941 * INSTNALL: Mention its usage.
3943 * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
3944 the former gives you the operating system rev directly. Use
3945 s/hpux.h if we don't recognize what we got.
3947 * Makefile.in (do-install): Don't remove a destination directory
3948 if it's the same as the source. If ${srcdir}/info == ${infodir},
3949 don't try to copy the info files.
3951 * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this
3952 doesn't work if you're not using a separate source directory.
3953 (do-install): Copy the build tree's etc directory only after
3954 making sure it's not also the source tree's etc directory.
3956 1993-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3958 * configure.in: Handle sunos4.1.3 specially.
3960 1993-05-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3962 * Makefile.in (INSTALL): Add definition.
3964 * configure.in: Fix some messages. Support -with-gnu-cc.
3965 At the end, use `set --', not `set -'.
3966 Delete spurious `.h' in hpux alternatives.
3968 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3970 * Version 19.8 released.
3972 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3974 * configure.in: When looking for source in the same directory as
3975 the configure script, make the path thus discovered absolute.
3976 If the user specifies the `--srcdir' switch, make that directory
3979 * Makefile.in (srcdir): Remove comment saying this doesn't work.
3981 * Makefile.in (src/paths.h): Edit the `infodir' variable into this
3982 too, as the value of the PATH_INFO macro.
3984 * configure.in: Check to see if the source lives in the same
3985 directory as the configure script.
3987 1993-05-24 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3989 * Makefile.in (install): Split this into `install' and
3990 `do-install', to give people more control over exactly what gets
3992 (do-install): New target, containing the guts of `install'. Don't
3993 remove and recreate the directories inside the copying loop - do
3994 it all before the copying loop. Pass more flags to the lib-src
3996 (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
3997 avoid errors and warnings.
3999 * configure.in: For generic IBM PC boxes, insist on "unknown" for
4000 the manufacturer - the more general case was blocking other i386
4001 configuration names below, and that's how the names are written in
4004 * make-dist: When breaking links, remove the link before moving
4005 the copy onto it, to avoid interactive behavior.
4007 * Makefile.in: Doc fix.
4009 * configure.in: Doc fix.
4011 * INSTALL: Mention --exec-prefix option.
4013 * configure.in: Add support for the `--exec-prefix' option.
4014 * Makefile.in: Accept that support.
4016 * configure.in: Use the AC_PROG_INSTALL macro.
4017 * Makefile.in (INSTALL): Variable removed.
4018 (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure.
4020 * configure.in: Distinguish between hp800's and hp700's by calling
4023 1993-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4025 * configure.in: Recognize configuration names for i860 boxes
4028 1993-05-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4030 * configure.in: Distinguish between hp800's and hp700's by the
4031 version of HP/UX they run, since that's something people are more
4032 likely to know - hp700's run 8.0.
4033 Add HP 700 configuration.
4035 * configure.in: Test for the presence of the `rename' function.
4037 * Makefile.in (C_SWITCH_X_SITE): New variable - get this from
4039 (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this.
4041 * make-dist: Break intra-tree links.
4043 * configure.in: Explain that this is an autoconf script, and give
4044 instructions for rebuilding configure from it. Arrange to put
4045 comments in configure explaining this too.
4047 * configure.in: Make the first line of the configure script be
4048 "#!/bin/sh". Leaving the first line blank didn't work.
4050 * configure.in (long_usage): Removed; made short_usage describe
4051 the options briefly.
4053 * configure.in: Implement the --prefix option.
4054 * Makefile.in (prefix): Add support for it here.
4055 * INSTALL: Document it here.
4057 * Makefile.in (install): Don't assume that the files in the `info'
4058 subdirectory match *.info. They don't have that prefix.
4060 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4062 * configure.in: Add case for version 5 of Esix.
4064 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4066 * Version 19.7 released.
4068 * make-dist: There aren't any *.com files in lib-src anymore.
4070 * make-dist: Copy texinfo.tex and texindex.c, rather than linking
4071 them; they're symlinks to other filesystems on the GNU machines.
4073 * make-dist: Check that the manual reflects the same version of
4074 Emacs as stated in lisp/version.el. Edit that version number into
4077 1993-05-21 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4079 * configure.in: Remove the hack of AC_DEFINE; use
4082 1993-05-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4084 * make-dist: Don't distribute precomp.com, compile.com, or
4085 link.com from ./src; they're in ./vms now.
4087 Some time-handling patches from Paul Eggert:
4088 * configure.in: Add AC_TIMEZONE.
4090 1993-05-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4092 * configure.in: Recognize Linux as a valid operating system for
4095 1993-05-18 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4097 * make-dist: Distribute some VMS files we got from Richard Levitte.
4099 * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as
4100 the source for the sed command, not oldXMenu/Makefile.
4102 1993-05-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4104 * INSTALL: Don't claim the srcdir option doesn't work.
4106 1993-05-16 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4108 * configure.in: Include remarks saying what order the autoconf
4109 tests should go in, and remind people to change config.h.in
4110 whenever they add autoconf tests which make #definitions.
4112 * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile.
4114 1993-05-15 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4116 * Makefile.in (oldXMenu/Makefile): Make this depend on
4117 ${srcdir}/oldXMenu/Makefile.in, not itself.
4119 * PROBLEMS: Some updates from David J. Mackenzie.
4121 More changes from David J. Mackenzie.
4122 * Makefile.in (install.sysv, install.xenix, install.aix): Targets
4123 removed; autoconf and config.h should specify all these
4125 (buildlisppath): Make this path depend on ${srcdir}.
4126 (INSTALLFLAGS): Removed.
4127 (INSTALL): Include the -c flag.
4128 (install): Change the way we invoke install accordingly.
4130 Install ${srcdir} changes from DJM.
4131 * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this
4133 (COPYDIR, COPYDESTS): Install files from both the etc directory in
4134 the source tree and the etc directory in the object tree.
4135 (${SUBDIR}): Pass the prefix variable down to submakes.
4136 (everywhere): Use `sed', not `/bin/sed'. Not all systems have sed
4138 (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in
4139 values for srcdir and VPATH.
4140 (install): Add `v' flag to tar command. Make sure that `dir'
4141 exists in ${srcdir}/info before copying it. Remember that the man
4142 pages come from the source tree, not the object tree.
4143 * configure.in: Remove remarks saying that the --srcdir option
4145 Create the etc directory in the object tree.
4146 Recognize configuration names of the form *-sun-solaris*.
4147 Recognize sunos5 and solaris as operating system names.
4149 * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for
4150 lib-src/getdate.y and src/systime.h.
4152 1993-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4154 * make-dist: Make links in info subdir.
4156 1993-05-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4158 * configure.in: Call AC_STDC_HEADERS.
4160 1993-05-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4162 * configure.in: Sidestep autoconf's quoting of the second argument
4163 of AC_DEFINE, so we can specify the value to put there. It would
4164 be nice if autoconf provided some way to specify computed values
4167 1993-05-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4169 * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
4170 this is always just -DHAVE_CONFIG_H.
4172 The GNU coding standards specify that CFLAGS should be left for
4174 * Makefile.in (CFLAGS): Let configure determine the default value
4176 have it default to DEFS.
4177 (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
4178 (lib-src/Makefile, src/Makefile): Edit the default value for
4179 CFLAGS into these files, not DEFS.
4180 * configure.in (CFLAGS): Choose a default value for this - "-g"
4181 normally, or "-g -O" if we're using GCC. Edit it into the
4184 * configure.in: When scanning the machine and system description
4185 #include files, write their names to conftest.c properly.
4187 1993-05-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4189 * configure.in: In configuration name case for Apallos running
4190 Domainios, set opsys, not opsysfile.
4192 * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce
4193 src/config.h, instead of AC_OUTPUT; the latter overwrites
4194 src/config.h even when it hasn't changed, puts a makefile-style
4195 comment at the top even though it's C code, and produces a
4196 config.status script which doesn't do the job right.
4198 * configure.in: Add AC_LN_S test, so we can tell whether or not we
4199 can use a symbolic link to get the X Menu library into src.
4200 * Makefile.in (LN_S): New variable.
4201 (src/Makefile): Edit the value of LN_S into this makefile.
4203 1993-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4205 * configure.in: Support *-sco3.2v4* as opsystem.
4207 * make-dist: Don't include calc directory.
4208 Exclude many files in the man directory; copy a few.
4210 1993-05-04 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4212 * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and
4213 call AC_STRUCT_TM to see what's in time.h.
4215 * configure.in: Employ quoting stupidity to get the value of CPP
4218 1993-04-27 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4220 * configure.in: Use the AC_PROG_CPP macro, and then use the CPP
4221 variable to scan the machine and system description files.
4223 * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h,
4224 so that getdate.y builds correctly.
4226 1993-04-26 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4228 * configure.in (tempcname): Change this to "conftest.c", so it will
4229 work properly on systems with short filenames; this is the name
4232 * configure.in: Also detect the availability of dup2 and
4235 * configure.in: Use the AC_ALLOCA test.
4236 * Makefile.in (ALLOCA): New variable, to be set by ./configure.
4237 (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
4239 1993-04-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4241 * make-dist: Distribute configure, as well as configure.in.
4244 1993-04-23 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4246 * Makefile.in (install): Print out the name of the directory we're
4247 copying, so people can have some idea of whether we're making
4250 * Makefile.in (install.aix, install.xenix, install.sysv, install):
4251 Don't forget to re-create the COPYDESTS directories after we clear
4254 1993-04-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4256 * Makefile.in: Add autoconf cookies so that the configure
4257 script can comment out sections of path variable definitions to
4258 choose between the installable configuration and the run-in-place
4260 * configure.in: Add new option `--run-in-place', to select the
4261 run-in-place path definitions.
4263 * configure.in: Add a clause to the big configuration name case
4264 for the NeXT machine.
4266 1993-04-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4268 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4269 Make sure that each source directory exists, and is different from
4270 the destination directory; then, delete the destination before
4271 copying over the source.
4273 * make-dist: Distribute configure.in, instead of configure.
4275 1993-04-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4277 * configure.in: Don't set CC to "gcc -O" if the user specifies
4278 `--with-gcc'. Add -O to DEFS if GCC is set.
4280 1993-04-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4282 * Makefile.in (clean mostlyclean): Missing right paren.
4284 * configure.in: When checking for X windows, search for an X11
4285 subdirectory of ${x_includes}.
4287 * configure.in: Check for gettimeofday function, for getdate.y.
4289 Change `configure' to a mixture of custom code and autoconf stuff.
4290 autoconf can't derive all the information we need, but we'd really
4291 like to be able to take advantage of some of its tests, and its
4292 file-editing facilities.
4293 * configure.in: Renamed from configure.
4294 Quote the sections of shell script we want copied literally to
4295 the configure script.
4296 (compile): Initialize this to make the autoconf macros' code happy.
4297 Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
4298 code to do their jobs.
4299 Use autoconf to produce Makefile and src/config.h.
4300 Remove the Makefile-style comment that autoconf places at the top
4302 (config_h_opts): Removed - no longer necessary.
4303 * Makefile.in (configname): Renamed to configuration.
4304 (CONFIG_CFLAGS): Renamed to DEFS.
4305 (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
4306 get values via autoload @cookies@.
4307 (libsrc_libs): Get this from autoconf. We used to do nothing
4309 (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
4311 * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
4312 echo the move-if-change command.
4314 1993-04-08 Jim Blandy (jimb@churchy.gnu.ai.mit.edu)
4316 * make-dist: Distribute lib-src/rcs-checkin.
4318 * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms.
4319 Don't try to make links to the RCS or Old subdirectories.
4320 Use the appropriate extension for the compression type in use.
4321 Create the tar file in the shell's initial default directory, not
4323 Erase the whole ${tempparent} tree, not just ${tempdir}.
4325 1993-03-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4327 * Makefile.in (src/paths.h): Don't echo the huge sed command we
4328 use to build paths.h.
4329 (lib-src/Makefile, src/Makefile): Similarly.
4331 * configure: Extend test for working `const' keyword to handle AIX
4334 1993-03-24 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4336 * make-dist: Distribute lisp/term/ChangeLog.
4338 Arrange for C compilation throughout the tree to get
4339 C_SWITCH_SYSTEM from the configuration files.
4340 * configure: Extract C_SWITCH_SYSTEM from the machine and
4341 system-dependent files, and save it in the top-level Makefile.
4342 * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit.
4343 (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile.
4345 * make-dist: Include the VMS support files in oldXMenu in the
4348 * configure: Doc fix.
4350 * configure: Fix corrupted config_h_opts.
4352 * configure: Properly report option names in error messages.
4354 * configure: Properly recognize --x-includes and --x-libraries
4357 * configure: Fix syntax errors in code handling XFree386.
4359 1993-03-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4361 * configure: Add special code to detect XFree386, and tell
4364 * configure: Properly handle extracting values of LIBS_MACHINE and
4365 LIBS_SYSTEM that contain spaces.
4367 * configure: Add `--x-includes' and `--x-libraries' options. I
4368 think these are dopey, but no less than three alpha testers, at
4369 large sites, have said they have their X files installed in odd
4370 places. Implement them by setting C_SWITCH_X_SITE and
4371 LD_SWITCH_X_SITE in src/config.h.
4373 1993-03-22 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4375 * make-dist: Don't distribute etc/Old files.
4377 * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their
4380 1993-03-20 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4382 * make-dist: Fix typo.
4384 1993-03-19 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4386 * make-dist: Corrected typo, fixed it to discard = and TAGS files
4387 in some cases where it should but didn't seen to.
4389 * Makefile.in: Added unlock and relock productions.
4391 1993-03-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4393 * make-dist: Add a --compress option to force make-dist to use
4396 * make-dist: Use gzip, if we can find it.
4398 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4399 make rs6000-ibm-aix default to -aix32.
4401 1993-03-17 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4403 * Makefile.in: Added `Developer's configuration' section.
4405 1993-03-17 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4407 * Makefile.in: Add commented-out variable settings for developer's
4410 1993-03-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4412 * make-dist: Distribute `src/bitmaps' too.
4414 1993-03-14 Charles Hannum (mycroft@hal.gnu.ai.mit.edu)
4416 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4417 make rs6000-ibm-aix default to -aix32.
4419 1993-03-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4421 * configure: Recognize strings like "sysvr0" or "sysvr1" as System V.
4423 * Makefile.in (install.sysv): Add a second `$' in front of
4424 `${dest}', so that the shell will expand it, instead of Make.
4426 * configure: When processing the name of the configure script,
4427 collapse `././' to `./', but leave a single `./' prefix alone.
4429 * configure: Doc fix.
4431 1993-03-04 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4433 * configure: Handle isc3.0 correctly.
4435 1993-02-25 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4437 * make-dist: Don't try to copy the COPYING notice into
4438 external-lisp; we're not distributing that directory any more.
4440 1993-02-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4442 * Makefile.in (install, install.aix, install.xenix, install.sysv):
4443 Remove CVS subdirectories from the installed directory trees, as
4444 well as RCS directories.
4446 1993-02-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4448 * make-dist: Only copy gmalloc.c if we couldn't link it.
4449 Don't try to copy man/{README,Makefile} unless they actually exist.
4451 * Makefile.in (lisppath): Don't include externallispdir in this.
4452 We're not sure whether we're even going to distribute the
4455 1993-02-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4457 * make-dist: Don't distribute the external-lisp directory anymore.
4458 * INSTALL: Remove all references to external-lisp.
4460 * configure: Detect whether the compiler supports `const'
4461 properly, and edit src/config.h accordingly.
4463 * configure: Tweak layout of final report.
4465 * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not
4468 * Makefile.in (locallisppath): Make this default to
4469 ${datadir}/emacs/site-lisp, instead of
4470 ${datadir}/emacs/local-lisp. ${datadir} and ${statedir} are often
4471 the same thing, and local-lisp causes completion conflicts with
4473 (lisppath): Add ${externallispdir} to this.
4474 * INSTALL: Adjust installation directions.
4476 * Makefile.in (externallispdir): New variable, to say where to
4477 install the externally-maintained lisp files.
4478 (COPYDIR, COPYDESTS): Copy the external lisp directory just like
4480 * INSTALL: Describe external-lisp and the new externallispdir
4483 1993-02-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4485 * configure (progname): New option `--with-gcc'. Make it clearer
4486 how we are trying to guess whether or not we have GCC.
4487 * INSTALL: Document the `--with-gcc' option, and improve
4488 description of `--with-x' options.
4490 1993-02-06 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4492 * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and
4493 ${infodir} from these variables; we have written out explicit code
4494 to install the info files.
4496 1993-01-25 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4498 * make-dist: Don't distributed the RCS files in the etc directory.
4500 1993-01-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4502 * Makefile.in: Some makes can't handle comments in the middle of
4503 commands; move them to before the whole rule.
4505 1993-01-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4507 * README: Mention what Emacs is.
4509 1993-01-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4511 * make-dist: Include `./lisp/calc-2.02' in the distribution.
4512 Add `./cpp' and `./man' back into the distribution.
4514 1993-01-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4516 * Makefile.in: Define MAKE, and use where appropriate.
4518 1993-01-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4520 * make-dist: Remember that the authoritative COPYING notice is
4521 `etc/COPYING', not `../etc/COPYING'.
4523 1992-12-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4525 * make-dist: Make sure that the COPYING notices in each directory
4526 are copies, not symlinks.
4528 1992-12-19 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4530 * INSTALL: The build process produces an executable called `emacs'
4531 now. Change references.
4532 * Makefile.in: Adjust `install.mumble' targets to install
4533 `src/emacs', not `src/xemacs'.
4535 * configure: Start with a blank line; this keeps some old CSH's
4536 from thinking it's a CSH script. Most systems will just use
4537 /bin/sh to run it, which is what we're expecting; the only other
4538 shells which might try to interpret it themselves are probably
4541 1992-12-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4543 * INSTALL: Improvements suggested by David Mackenzie.
4545 1992-12-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4547 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4548 Don't try to copy the info files if there aren't any; the
4549 unexpanded globbing pattern disappoints `install'. Ignore the
4550 return status of that command.
4552 * INSTALL: Updated for new configuration arrangement.
4554 * configure: Don't make the top-level Makefile read-only - people
4555 may want to edit the values of the path variables.
4557 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4558 Install the info files in ${infodir}. Install the executable
4559 under both `emacs' and `emacs-VERSION'.
4561 * Makefile.in: Doc fix.
4563 * Makefile.in (exec_prefix): New variable, as per latest version
4564 of coding standards.
4565 (bindir, libdir): Use it, instead of `prefix'.
4566 (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
4568 * Makefile.in (mandir): Make the default value for this depend on
4571 * Makefile.in (datadir, statedir, libdir): Make these all default
4573 (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
4576 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4577 Install the etags and ctags man pages too.
4579 * Makefile.in (distclean): Don't delete backup files; that's the
4581 (extraclean): Like distclean, but deletes backup and autosave files.
4583 1992-12-10 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4585 Make path specification conform to GNU coding standards.
4586 * configure (long_usage): Remove all traces of old arguments from
4587 usage messages, and document the options we do accept in more
4588 detail: -with-x... and --srcdir.
4589 (options, boolean_opts): Deleted; we don't have enough options to
4590 make this worthwhile.
4591 (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
4592 along with the code which supported them; these should be set as
4593 arguments to the top-level make.
4594 (config_h_opts): Since this no longer doubles as a list of option
4595 names, make them upper case; this simplifies the code which uses
4596 them to build the sed command to edit src/config.h. Change the
4597 code which sets them.
4598 (cc, g, O): Don't allow the user to set these using options; they
4599 should be specified using `CC=' and `CFLAGS=' arguments to the
4600 top-level make. Just choose reasonable default values for them,
4601 and edit them into Makefile.in's default CC and CONFIG_CFLAGS
4603 (gnu_malloc, rel_alloc): Don't allow the user to set these using
4604 options; use them whenever the configuration files say they're
4606 Simplify the argument processing loop. Don't accept abbreviations
4607 for option names; these might conflict with other configuration
4608 options in the future.
4609 Add some support for the `--srcdir' option. Check for the sources
4610 in . and .. if `--srcdir' is omitted. If the directories we will
4611 compile in don't exist yet, create them under the current directory.
4612 Note that the rest of the build process doesn't really support
4614 Edit only the top Makefile. That should edit the others. Edit
4615 into the makefile: `version', from lisp/version.el, `configname'
4616 and `srcdir' from the configuration arguments, `CC' and
4617 `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
4618 the user's path, and LOADLIBES as gleaned from the system
4620 Simplify the report generated; it doesn't need to include any
4621 description of paths now.
4622 Make `config.status' exec configure instead of just calling it, so
4623 there's no harm in overwriting `config.status'.
4624 * Makefile.in (version, configname): New variables, used to choose
4625 the default values for datadir and libdir.
4626 Path variables rearranged into two clearer groups:
4627 - In the first group are the variables specified by the GNU coding
4628 standards (prefix, bindir, datadir, statedir, libdir, mandir,
4629 manext, infodir, and srcdir).
4630 - In the second are the variables actually used for Emacs's paths
4631 (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
4632 archlibdir), which depend on the first category.
4633 datadir and libdir default to directories under
4634 ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
4636 etcdir and lispdir default to subdirectories of datadir.
4637 archlibdir defaults to libdir.
4638 The new installation tree is a bit deeper than it used to be, so
4639 use the new make-path program in lib-src to build them all.
4640 Always build a new src/paths.h.tmp and then move-if-change it to
4641 src/paths.h, to avoid unnecessary rebuilds while responding to the
4643 Remove all mention of arch-lib. Run utility commands from
4644 lib-src, and let the executables be copied into archlibdir when
4646 Add targets for src/Makefile, lib-src/Makefile, and
4647 oldXMenu/Makefile, editing the values of the path variables into
4649 Let lib-src do its own installation.
4650 (datadir): Default to putting data files under
4651 ${prefix}/lib/emacs/${version}, not /usr/local/emacs.
4652 (emacsdir): Variable deleted; it would only be confusing to use.
4653 (lispdir, etcdir): Default to ${datadir}/lisp.
4654 (mkdir): Use make-path for this.
4655 (lockdir): Do this in mkdir.
4656 (Makefile): New target.
4658 * configure (usage_message): Rename to long_usage.
4660 * make-dist: Don't bother creating an arch-lib directory; that's
4661 only for installation now.
4663 1992-11-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4665 * configure: Use GCC-style configuration names, using config.sub.
4666 Change the usage and help messages.
4668 * configure: Initialize window_system, not indow_system.
4670 * configure: Report which window system, compiler, and signal
4671 handler return type we decide to use.
4673 * make-dist: Explain what's going on if config.sub and gmalloc.c
4674 can't be linked. Place the code which copies them near the code
4675 which links the rest of the files around them.
4677 1992-11-15 Jim Blandy (jimb@apple-gunkies.gnu.ai.mit.edu)
4679 * make-dist: Don't bother to distribute src/*.com, or
4680 src/vmsbuild; those have all been moved to `../vms'.
4682 1992-11-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4684 * make-dist: Don't forget that the way to avoid filenames starting
4685 with `=' is to use the pattern `[a-zA-Z0-9]*.h', not
4686 `[a-zA-Z0-9].h'. Add a new section for dealing with files that we
4687 couldn't make hard links to, since we have two already, and
4688 perhaps more to come.
4690 1992-11-04 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4692 * configure: When editing parameters into lib-src/Makefile, change
4693 the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS
4694 needs some other flags too.
4696 1992-11-03 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4698 * configure: Remove spurious echo of the configuration name.
4700 * make-dist: Don't distribute files in src/m and src/s whose names
4703 1992-10-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4705 * configure: Update GNU_MALLOC and REL_ALLOC in config.h.
4706 Also LISP_FLOAT_TYPE.
4708 1992-10-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4710 * make-dist: Copy config.sub, since it's a symbolic link to a file
4711 on another file system.
4713 1992-10-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4715 * make-dist: Include lib-src/makedoc.com and emacs.csh in the
4718 * config.sub: New file, to help us recognize configuration names.
4719 * make-dist: Include it in the distribution.
4721 1992-09-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4723 * configure: Convert `-' to `_' in specified option names.
4724 Accept options with --. Delete --highpri and --have-x-menu options.
4725 New options --with-x and --with-x10 replace -window-system.
4726 Don't mention options --gnu-malloc, --rel-alloc
4727 or --lisp-float-type in help message.
4729 1992-09-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4731 * make-dist: Include the `vms' subdirectory in the distribution.
4733 1992-09-10 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4735 * configure: Remove lines starting with "# DIST: " when building
4736 lib-src/Makefile and src/Makefile. This allows us to mark the
4737 "Makefile.in" files with explanatory comments which won't also get
4738 stuck in the Makefiles.
4740 1992-09-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4742 * make-dist: Don't use the '+' operator in the sed regular
4743 expression that extracts the version number from lisp/version.el;
4744 Ultrix sed doesn't seem support the operator. Just double the
4747 1992-09-01 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4749 * Makefile.in: Doc fix.
4751 1992-08-31 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4753 * configure: Rewrite sed command to remove at most one ./ prefix;
4754 Ultrix's sed doesn't allow us to apply the * operator to a \( \)
4757 1992-08-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4759 * Makefile.in (src/paths.h): Use sed, not /bin/sed.
4761 1992-08-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4763 * make-dist: Go ahead and build a new TAGS file, unless the
4764 --newer option was specified. Don't try to delete a TAGS file
4765 from etc; it's not kept there, and shouldn't be deleted anyway.
4767 1992-08-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4769 * make-dist: If the lisp directory contains a default.el, don't
4772 * configure: When searching signal.h for the type of a signal
4773 return handler, make a copy of it, not a symbolic link to it; that
4774 way, it will work on systems that don't have symbolic links.
4776 1992-08-14 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4778 * make-dist: taught it about vcdiff and rcs2log, added --newer
4779 option for generating incremental distributions. Stopped it from
4780 generating a TAGS file into the distribution; that sucker is
4781 *big*, and easily enough generated with the toplevel makefile.
4783 1992-08-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4785 * configure: When writing config.status, don't prefix progname
4786 with a '.'; it might be absolute.
4788 1992-08-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4790 * configure: Choose to use X11 if either /usr/lib/libX11.a or
4791 /usr/include/X11 exist, not only if both exist.
4793 1992-07-27 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4795 * make-dist: Make the new external-lisp directory a duplicate of
4796 the external-lisp directory, not the lisp directory.
4798 1992-07-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4800 * Makefile.in (clean, mostlyclean): Don't bother trying to `make
4801 clean' in arch-lib; it doesn't even have a Makefile.
4803 * Makefile.in (clean, mostlyclean): In the test which tries to
4804 distinguish between the build directory, which should be cleaned,
4805 and the installed directory, which shouldn't, cd to `${emacsdir}',
4806 not `${DESTDIR}${LIBDIR}'.
4808 1992-06-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4810 * make-dist: Be sure to delete the .c and .h files that YACC and
4811 BISON create from getdate.y.
4813 * external-lisp: New directory; see `external-lisp/README'.
4814 * make-dist: Added support for the external-lisp subdirectory.
4816 * make-dist: Changed message which complains that make-dist wasn't
4817 invoked in the right directory to indicate which files it was
4820 1992-06-29 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4822 * configure: Add comments explaining why we can't translate
4823 character ranges or control characters in `tr'.
4825 1992-06-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4827 * configure: When generating the configuration message, we used to
4828 build the message from the start so that each line began with "# "
4829 so that it would be a comment in `config.status'. However, this
4830 causes trouble if any of the variables we use in the message
4831 expand to more than one line of text - as gnu_malloc_reason
4832 sometimes does. So instead, we build the message as it should be
4833 printed to the user (i.e. without the "# " prefixes), and stick on
4834 the "# "s when we write it to `config.status'.
4836 * Makefile.in (clean, mostlyclean): Don't neglect to clean out
4837 `lib-src' and `arch-lib'.
4839 * configure: When generating report and `config.status' file, note
4840 that bindir only determines where `make install' and
4841 `build-install' will place the executables; this should make it
4842 clear that the ordinary build process will not try to install
4845 1992-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4847 * make-dist: Change messages to say that we are 'making links to
4848 X', rather than 'copying X'. And put `' quotes around file names.
4850 * make-dist: Include '.tmp' in the name of the staging directory.
4852 * make-dist: Pass the `-f' option to rm when you're not sure that
4853 the files you're removing actually exist.
4855 * make-dist: When setting up etc/COPYING, always nuke whatever is
4856 there, and then copy it in, to make sure we get a real file.
4858 * make-dist: Don't try to distribute *.defns files any more. The
4859 only such file was for simula.el, which has been superceded by a
4860 version which doesn't have a separate .defns file.
4862 1992-05-28 Ken Raeburn (Raeburn@Cygnus.COM)
4864 * make-dist: Don't distribute configured versions of config.h.in,
4865 paths.h.in, Makefile.in in src.
4867 * configure: Delete .tmp files before creating them; don't bother
4868 trying to make final targets writeable first, since it won't
4869 matter to move-if-change.
4871 1992-05-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4873 * Makefile.in (mkdir, lockdir): Don't put dashes in front of the
4874 mkdir and chmod in the center of all the conditionals. GNU Make
4875 will strip these out, but other makes won't.
4877 1992-05-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4879 * make-dist: Include move-if-change in list of files to distribute.
4881 1992-05-04 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4883 * configure: Remove any "." elements from the program name.
4885 * configure: Don't record the values of all the possible arguments
4886 in config.status; only record the options that the user specified.
4888 * configure: Use move-if-change to move in the new src/config.h.
4890 1992-04-29 Ken Raeburn (Raeburn@Cygnus.COM)
4892 * move-if-change: New file, copied from gcc release.
4893 * Makefile.in (src/paths.h): Use it, and put the "sed" output into
4894 a temp file, so we don't update paths.h if an error occurs or if
4895 it doesn't need changing.
4897 1992-04-28 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4899 * Makefile.in (src/paths.h): Do not install a value for the
4900 PATH_SUPERLOCK value; that macro doesn't exist anymore.
4901 * build-install.in: Same thing.
4903 1992-04-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4905 * make-dist: Check the flag called "make_tar", not "make_dir"; the
4906 latter, being a typo, is always false, resulting in a program
4907 whose default behaviour is to painstakingly build a copy of the
4908 source tree, and then delete it. Rah.
4910 * Makefile.in: Add dist target, and comment for it.
4912 * configure: When scanning <signal.h> for a declaration for
4913 signal, create a symbolic link with a name ending in .c, so the
4914 compiler won't complain that it's only been given .h files.
4916 * configure: Check whether there are any arguments available
4917 before shifting to get the value of a non-boolean parameter.
4919 * make-dist: Doc fix.
4921 1992-04-20 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4923 * configure: Instead of grepping /usr/include/signal.h for a
4924 signal declaration, run /usr/include/signal.h or
4925 /usr/include/sys/signal.h through cpp and grep for the
4928 * configure: Redirect the output of grep to /dev/null instead of
4929 using grep -s - that flag means different things on other systems.
4931 * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath',
4932 since the former is recognizable even if you don't know what
4934 * configure: Accomodate that change.
4936 * configure: Accept options for all of the directories you can
4937 change in the Makefile.
4939 * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE".
4941 * INSTALL: Mention that you have to copy all the 'FOO.in' files to
4942 FOO before you can use them.
4944 * build-install.in: Made the "Where To Install Things" section
4945 conform with the similar section from Makefile.in. Copied section
4946 which builds src/paths.h from src/paths.h.in from the Makefile.
4948 1992-04-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4950 * configure: Write config.status to pass its command-line
4951 arguments on to configure, so that people can use it to recreate
4952 an old configuration, with minor changes.
4954 1992-04-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4956 * configure: Don't rely on option variables being unset if their
4957 values are the empty string. In particular, when producing the
4958 English report, don't assume that highpri will be unset when no
4959 increased priority has been requested; -highpri='' should be the
4960 same as omitting -highpri altogether.
4962 * configure: Fix dumb bug: when running the system and machine
4963 description files through cpp, mark those lines that we want to
4964 evaluate with the string '@configure@', and then only evaluate
4965 them. This way if the files include anything that actually
4966 generates text (type definitions or external declarations, say),
4967 we won't try to eval it.
4969 1992-04-11 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4971 * make-dist: New shell script.
4973 * configure: When creating foo from foo.in, make foo read-only to
4974 remind people to edit the .in file instead.
4976 * INSTALL: Changed references to config.h-dist to config.h.in.
4977 The "BUILDING GNU EMACS BY HAND" section neglected to mention how
4978 to build src/paths.h from src/paths.h.in; added a paragraph to do
4980 * configure, Makefile, build-install: Changed filenames like
4983 1992-04-08 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4985 * Makefile, build-install: Renamed to Makefile.in and
4986 build-install.in; the configure script will edit these to produce
4987 the usable Makefile and build-install.
4988 * configure: Changed to produce ./Makefile, ./build-install,
4989 lib-src/Makefile, and src/Makefile from their *.in counterparts,
4990 instead of editing them in place.
4992 1992-04-07 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4994 * Makefile: Re-arranged so that the undumped Emacs will search
4995 ../lisp *after* the site's local elisp files.
4996 (locallisppath, dumplisppath): New variables.
4997 (lisppath): This variable's default value is now chosen based on
4998 $(locallisppath) and $(lispdir); while it used to be the
4999 customization point for adding site-local elisp directories to
5000 load-path, that job is now handled mostly by locallisppath.
5001 (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH.
5002 Check the values being assigned to the *LOADSEARCH macros for null
5003 path elements (like '::' in 'foo::bar').
5005 * configure: When checking if the machine- and system-dependent
5006 files define a particular macro or not, actually run them through
5007 CPP and test the macros with #ifs, instead of just grepping for
5008 the macros' names. In particular, check for SYSTEM_MALLOC in this
5011 1992-04-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
5013 * Makefile (install): Don't use -s in install. (Keep the symbols.)
5015 1992-04-02 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5017 * configure: Make the config.status file an executable shell
5018 script which will recreate the same configuration. Include the
5019 verbal description of the current configuration as a comment in
5023 * Makefile: brought the Makefile up to the GNU coding
5024 standards, as described in standards.text:
5025 (TAGS): New name for the target which rebuilds the tags table.
5026 (check): New target; doesn't do anything yet.
5027 (mostlyclean): New target, synonymous with clean.
5028 (realclean): New target. Currently, this just calls the
5029 subdirectories's makefiles and then deletes config.status.
5030 (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
5032 Installation directory variables changed to conform.
5033 (install, install.sysv, install.xenix, install.aix): Changed the
5034 code which copies the directories into their installed location to
5035 allow the installed locations to be in several different
5036 directories; the old version assumed that they would all be in
5038 (mkdir, lockdir): Allow the installed locations to be in several
5039 different directories.
5042 * build-install: Use the same variable names as the Makefile.
5043 Allow the installed locations to be in several different
5046 1992-03-31 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5048 * Makefile (src/paths.h): Instead of using a single sed command to
5049 edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two
5050 separately, and don't forget to append "/!!!SuperLock!!!" to the
5051 value of the PATH_SUPERLOCK macro.
5053 * config.emacs: Renamed to configure, for consistency with other
5054 GNU products. Internal references changed.
5055 INSTALL, Makefile: References changed.
5057 * lock: New directory, which should always be empty. If this
5058 directory doesn't exist, Emacs won't complain; it just won't lock.
5059 Having this here means that people can just unpack Emacs, build
5060 it, and have locking work.
5062 * share-lib: Re-renamed to etc, for the sake of tradition.
5063 * config.emacs: Changed default value for datadir to ../etc.
5064 * INSTALL, README: Adjusted.
5066 1992-03-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5068 * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile
5069 by running CPP on the appropriate s/*.h and m/*.h files.
5071 1992-03-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5073 * config.emacs: Make sure to set the "exit on error" flag once
5074 we've removed config.status; errors should abort the configuration.
5076 1992-02-15 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5078 * config.emacs: Added -distribute option, so that the Makefile
5079 paths are in their proper form. I don't know why this matters.
5081 1992-02-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5083 * local-lisp: New directory, empty in the distribution, for people
5084 to put local elisp code in.
5085 * config.emacs: Include it in the default load path.
5086 * README: Document it.
5088 1992-01-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5090 * config.emacs: Guess the type of signal handling functions based
5091 on the contents of /usr/include/signal.h.
5093 * config.emacs: Print out progress report messages.
5095 * Makefile (src/paths.h): Don't generically replace
5096 /usr/local/lib/emacs with LIBROOT. This can hide bugs in the
5097 editing of the other entries, and each entry should be dealt with
5100 * build-install: Converted from C-shell to Bourne shell.
5101 * config.emacs: Edit build-install properly.
5103 * config.emacs: Doc fix.
5105 1992-01-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
5107 * Makefile (install): Remove `B' from tar xf command.
5109 1992-01-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5111 * config.emacs: Removed support for the `maintain-environment'
5112 option; the only important difference between this and its absence
5114 * INSTALL: Removed mention of `maintain-environment'.
5116 * config.emacs: Fix arguments to sed when processing boolean
5119 1991-12-05 Jim Blandy (jimb@pogo.gnu.ai.mit.edu)
5121 * config.emacs: New file, to help automate the installation
5124 * Makefile: Lots of changes to support the separation of etc into
5125 architecture-dependent and -independent files:
5126 (EMACSROOT): New variable, giving the directory under which all of
5127 Emacs's libraries should be installed. Changed rest of file to
5129 (LIBDIR): Now denotes only architecture-dependent dir - relevant cha
5130 (DATADIR): New variable, denoting architecture-independent dir.
5131 (LOCKDIR): New variable, for completeness.
5132 (SUBDIR): No more etc, new lib-src.
5133 (COPYDIR): No more etc, new arch-lib and share-lib.
5134 (src/paths.h): Set PATH_DATA and the LOCK macros too.
5135 (src): Now depends on lib-src, not etc.
5136 * build-install: Changes parallel to the above.
5137 * README: Describe the new arrangement.
5139 * vms: New subdirectory for all the VMS stuff.
5141 1991-12-03 Jim Blandy (jimb@pogo.gnu.ai.mit.edu)
5143 * Makefile (LISPPATH): New variable.
5144 (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH.
5146 1990-09-28 Richard Stallman (rms@mole.ai.mit.edu)
5148 * Makefile (install, install.sysv, install.xenix):
5149 Install wakeup instead of loadst. No need for setuid or setgid.
5151 1990-08-07 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
5153 * Makefile (clean): Clean etc if that's not the installation dir.
5155 1990-04-26 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
5157 * Makefile (paths.h): Make sed alter each name in the path.
5159 1988-08-30 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
5161 * Makefile (install.sysv): Use cpio, not tar.
5163 1988-08-03 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
5165 * Makefile (lockdir): Rename `lock' target.
5166 Depend on it from install*, not from `all'.
5168 1988-05-16 Richard Stallman (rms@frosted-flakes.ai.mit.edu)
5170 * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin}
5171 to match build-install and paths.h.
5174 ;; coding: iso-2022-7bit-unix
5177 Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001
5178 Free Software Foundation, Inc.
5179 Copying and distribution of this file, with or without modification,
5180 are permitted provided the copyright notice and this notice are preserved.