| blob | 4b36af6383bcde432d606557a99eda944491f8de |
1 #/** @file\r
2 # Open Virtual Machine Firmware: FDF\r
3 #\r
4 # Copyright (c) 2006 - 2009, Intel Corporation\r
5 #\r
6 # All rights reserved. This program and the accompanying materials\r
7 # are licensed and made available under the terms and conditions of the BSD License\r
8 # which accompanies this distribution. The full text of the license may be found at\r
9 # http://opensource.org/licenses/bsd-license.php\r
10 #\r
11 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
12 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
13 #\r
14 #**/\r
15 \r
16 ################################################################################\r
17 #\r
18 # FD Section\r
19 # The [FD] Section is made up of the definition statements and a\r
20 # description of what goes into the Flash Device Image. Each FD section\r
21 # defines one flash "device" image. A flash device image may be one of\r
22 # the following: Removable media bootable image (like a boot floppy\r
23 # image,) an Option ROM image (that would be "flashed" into an add-in\r
24 # card,) a System "Flash" image (that would be burned into a system's\r
25 # flash) or an Update ("Capsule") image that will be used to update and\r
26 # existing system flash.\r
27 #\r
28 ################################################################################\r
29 [FD.OVMF]\r
30 BaseAddress = 0xFFE00000 # The base address of the FLASH Device.\r
31 Size = 0x00200000 # The size in bytes of the FLASH Device\r
32 ErasePolarity = 1\r
33 BlockSize = 0x10000\r
34 NumBlocks = 0x20\r
35 \r
36 ################################################################################\r
37 #\r
38 # Following are lists of FD Region layout which correspond to the locations of different\r
39 # images within the flash device.\r
40 #\r
41 # Regions must be defined in ascending order and may not overlap.\r
42 #\r
43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
44 # the pipe "|" character, followed by the size of the region, also in hex with the leading\r
45 # "0x" characters. Like:\r
46 # Offset|Size\r
47 # PcdOffsetCName|PcdSizeCName\r
48 # RegionType <FV, DATA, or FILE>\r
49 #\r
50 ################################################################################\r
51 0x0|0x200000\r
52 gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize\r
53 FV = MAINFV\r
54 \r
55 ################################################################################\r
56 #\r
57 # FV Section\r
58 #\r
59 # [FV] section is used to define what components or modules are placed within a flash\r
60 # device file. This section also defines order the components and modules are positioned\r
61 # within the image. The [FV] section consists of define statements, set statements and\r
62 # module statements.\r
63 #\r
64 ################################################################################\r
65 [FV.DXEFV]\r
66 BlockSize = 0x1000\r
67 FvAlignment = 16 #FV alignment and FV attributes setting.\r
68 ERASE_POLARITY = 1\r
69 MEMORY_MAPPED = TRUE\r
70 STICKY_WRITE = TRUE\r
71 LOCK_CAP = TRUE\r
72 LOCK_STATUS = TRUE\r
73 WRITE_DISABLED_CAP = TRUE\r
74 WRITE_ENABLED_CAP = TRUE\r
75 WRITE_STATUS = TRUE\r
76 WRITE_LOCK_CAP = TRUE\r
77 WRITE_LOCK_STATUS = TRUE\r
78 READ_DISABLED_CAP = TRUE\r
79 READ_ENABLED_CAP = TRUE\r
80 READ_STATUS = TRUE\r
81 READ_LOCK_CAP = TRUE\r
82 READ_LOCK_STATUS = TRUE\r
83 \r
84 #\r
85 # Files to be placed in DXEFV\r
86 #\r
87 # This firmware volume will have files placed in it uncompressed,\r
88 # and then then entire firmware volume will be compressed in a\r
89 # single compression operation in order to achieve better\r
90 # overall compression.\r
91 #\r
92 \r
93 APRIORI DXE {\r
94 INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
95 INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
96 }\r
97 \r
98 #\r
99 # DXE Phase modules\r
100 #\r
101 INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
102 \r
103 INF IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf\r
104 INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
105 \r
106 INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
107 INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
108 INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
109 INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf\r
110 INF PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf\r
111 INF UefiCpuPkg/CpuIoDxe/CpuIo.inf\r
112 INF UefiCpuPkg/CpuDxe/CpuDxe.inf\r
113 INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf\r
114 INF PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf\r
115 INF IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf\r
116 INF PcAtChipsetPkg/KbcResetDxe/Reset.inf\r
117 INF MdeModulePkg/Universal/Metronome/Metronome.inf\r
118 INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf\r
119 \r
120 INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
121 INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
122 INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
123 INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
124 INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
125 INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
126 INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
127 INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
128 INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf\r
129 INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
130 INF MdeModulePkg/Universal/PrintDxe/PrintDxe.inf\r
131 INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
132 INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
133 INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
134 INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf\r
135 INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf\r
136 INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf\r
137 INF PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf\r
138 INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
139 INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
140 \r
141 INF PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf\r
142 INF IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf\r
143 INF IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf\r
144 INF IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf\r
145 INF IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf\r
146 \r
147 INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf\r
148 INF MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf\r
149 INF RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf\r
150 \r
151 INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
152 \r
153 INF EdkShellBinPkg/FullShell/FullShell.inf\r
154 \r
155 FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {\r
156 SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress\r
157 SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
158 }\r
159 }\r
160 \r
161 ################################################################################\r
162 \r
163 [FV.MAINFV]\r
164 FvAlignment = 16\r
165 ERASE_POLARITY = 1\r
166 MEMORY_MAPPED = TRUE\r
167 STICKY_WRITE = TRUE\r
168 LOCK_CAP = TRUE\r
169 LOCK_STATUS = TRUE\r
170 WRITE_DISABLED_CAP = TRUE\r
171 WRITE_ENABLED_CAP = TRUE\r
172 WRITE_STATUS = TRUE\r
173 WRITE_LOCK_CAP = TRUE\r
174 WRITE_LOCK_STATUS = TRUE\r
175 READ_DISABLED_CAP = TRUE\r
176 READ_ENABLED_CAP = TRUE\r
177 READ_STATUS = TRUE\r
178 READ_LOCK_CAP = TRUE\r
179 READ_LOCK_STATUS = TRUE\r
180 \r
181 #\r
182 # Files to be placed in MAINFV\r
183 #\r
184 # This firmware volume will have all the files placed in it which\r
185 # must not be compressed at the initial boot phase. The only\r
186 # exception to this is the compressed 'DXEFV'.\r
187 #\r
188 \r
189 APRIORI PEI {\r
190 INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
191 }\r
192 \r
193 #\r
194 # SEC Phase modules\r
195 #\r
196 INF OvmfPkg/Sec/SecMain.inf\r
197 \r
198 #\r
199 # PEI Phase modules\r
200 #\r
201 INF MdeModulePkg/Core/Pei/PeiMain.inf\r
202 INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
203 INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
204 INF OvmfPkg/PlatformPei/PlatformPei.inf\r
205 INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
206 \r
207 #\r
208 # This file contains the compressed 'DXEFV', which is compressed\r
209 # in a single compression operation in order to achieve better\r
210 # overall compression.\r
211 #\r
212 FILE FV_IMAGE = 20bc8ac9-94d1-4208-ab28-5d673fd73486 {\r
213 SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress\r
214 SECTION FV_IMAGE = DXEFV\r
215 }\r
216 }\r
217 \r
218 INF RuleOverride=RESET_VECTOR OvmfPkg/ResetVector/Bin/ResetVector.inf\r
219 \r
220 ################################################################################\r
221 #\r
222 # Rules are use with the [FV] section's module INF type to define\r
223 # how an FFS file is created for a given INF file. The following Rule are the default\r
224 # rules for the different module type. User can add the customized rules to define the\r
225 # content of the FFS file.\r
226 #\r
227 ################################################################################\r
228 \r
229 [Rule.Common.PEI_CORE]\r
230 FILE PEI_CORE = $(NAMED_GUID) {\r
231 PE32 PE32 |.efi\r
232 UI STRING ="$(MODULE_NAME)" Optional\r
233 VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
234 }\r
235 \r
236 [Rule.Common.SEC]\r
237 FILE SEC = $(NAMED_GUID) {\r
238 PE32 PE32 |.efi\r
239 UI STRING ="$(MODULE_NAME)" Optional\r
240 VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
241 }\r
242 \r
243 [Rule.Common.PEIM]\r
244 FILE PEIM = $(NAMED_GUID) {\r
245 PEI_DEPEX PEI_DEPEX Optional |.depex\r
246 PE32 PE32 |.efi\r
247 UI STRING="$(MODULE_NAME)" Optional\r
248 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
249 }\r
250 \r
251 [Rule.Common.PEIM.TIANOCOMPRESSED]\r
252 FILE PEIM = $(NAMED_GUID) {\r
253 PEI_DEPEX PEI_DEPEX Optional |.depex\r
254 GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
255 PE32 PE32 |.efi\r
256 UI STRING="$(MODULE_NAME)" Optional\r
257 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
258 }\r
259 }\r
260 \r
261 [Rule.Common.DXE_CORE]\r
262 FILE DXE_CORE = $(NAMED_GUID) {\r
263 PE32 PE32 |.efi\r
264 UI STRING="$(MODULE_NAME)" Optional\r
265 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
266 }\r
267 \r
268 [Rule.Common.UEFI_DRIVER]\r
269 FILE DRIVER = $(NAMED_GUID) {\r
270 DXE_DEPEX DXE_DEPEX Optional |.depex\r
271 PE32 PE32 |.efi\r
272 UI STRING="$(MODULE_NAME)" Optional\r
273 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
274 }\r
275 \r
276 [Rule.Common.DXE_DRIVER]\r
277 FILE DRIVER = $(NAMED_GUID) {\r
278 DXE_DEPEX DXE_DEPEX Optional |.depex\r
279 PE32 PE32 |.efi\r
280 UI STRING="$(MODULE_NAME)" Optional\r
281 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
282 }\r
283 \r
284 [Rule.Common.DXE_RUNTIME_DRIVER]\r
285 FILE DRIVER = $(NAMED_GUID) {\r
286 DXE_DEPEX DXE_DEPEX Optional |.depex\r
287 PE32 PE32 |.efi\r
288 UI STRING="$(MODULE_NAME)" Optional\r
289 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
290 }\r
291 \r
292 [Rule.Common.UEFI_APPLICATION]\r
293 FILE APPLICATION = $(NAMED_GUID) {\r
294 PE32 PE32 |.efi\r
295 UI STRING="$(MODULE_NAME)" Optional\r
296 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
297 }\r
298 \r
299 [Rule.Common.USER_DEFINED.ACPITABLE]\r
300 FILE FREEFORM = $(NAMED_GUID) {\r
301 RAW ACPI |.acpi\r
302 RAW ASL |.aml\r
303 }\r
304 \r
305 [Rule.Common.SEC.RESET_VECTOR]\r
306 FILE RAW = $(NAMED_GUID) {\r
307 RAW RAW |.raw\r
308 }\r
309 \r
310 [OptionRom.CirrusLogic5446]\r
311 INF OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430Dxe.inf {\r
312 PCI_DEVICE_ID = 0x00B8\r
313 }\r
314 \r