| blob | e492c5921b1eb3c9e9e4695d80e45b99106e6429 |
1 #/** @file\r
2 # Open Virtual Machine Firmware: FDF\r
3 #\r
4 # Copyright (c) 2006 - 2009, Intel Corporation\r
5 #\r
6 # All rights reserved. This program and the accompanying materials\r
7 # are licensed and made available under the terms and conditions of the BSD License\r
8 # which accompanies this distribution. The full text of the license may be found at\r
9 # http://opensource.org/licenses/bsd-license.php\r
10 #\r
11 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
12 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
13 #\r
14 #**/\r
15 \r
16 ################################################################################\r
17 #\r
18 # FD Section\r
19 # The [FD] Section is made up of the definition statements and a\r
20 # description of what goes into the Flash Device Image. Each FD section\r
21 # defines one flash "device" image. A flash device image may be one of\r
22 # the following: Removable media bootable image (like a boot floppy\r
23 # image,) an Option ROM image (that would be "flashed" into an add-in\r
24 # card,) a System "Flash" image (that would be burned into a system's\r
25 # flash) or an Update ("Capsule") image that will be used to update and\r
26 # existing system flash.\r
27 #\r
28 ################################################################################\r
29 [FD.OVMF]\r
30 BaseAddress = 0xFFE00000 # The base address of the FLASH Device.\r
31 Size = 0x00200000 # The size in bytes of the FLASH Device\r
32 ErasePolarity = 1\r
33 BlockSize = 0x10000\r
34 NumBlocks = 0x20\r
35 \r
36 ################################################################################\r
37 #\r
38 # Following are lists of FD Region layout which correspond to the locations of different\r
39 # images within the flash device.\r
40 #\r
41 # Regions must be defined in ascending order and may not overlap.\r
42 #\r
43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
44 # the pipe "|" character, followed by the size of the region, also in hex with the leading\r
45 # "0x" characters. Like:\r
46 # Offset|Size\r
47 # PcdOffsetCName|PcdSizeCName\r
48 # RegionType <FV, DATA, or FILE>\r
49 #\r
50 ################################################################################\r
51 0x0|0x200000\r
52 gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize\r
53 FV = MAINFV\r
54 \r
55 ################################################################################\r
56 #\r
57 # FV Section\r
58 #\r
59 # [FV] section is used to define what components or modules are placed within a flash\r
60 # device file. This section also defines order the components and modules are positioned\r
61 # within the image. The [FV] section consists of define statements, set statements and\r
62 # module statements.\r
63 #\r
64 ################################################################################\r
65 [FV.DXEFV]\r
66 BlockSize = 0x1000\r
67 FvAlignment = 16 #FV alignment and FV attributes setting.\r
68 ERASE_POLARITY = 1\r
69 MEMORY_MAPPED = TRUE\r
70 STICKY_WRITE = TRUE\r
71 LOCK_CAP = TRUE\r
72 LOCK_STATUS = TRUE\r
73 WRITE_DISABLED_CAP = TRUE\r
74 WRITE_ENABLED_CAP = TRUE\r
75 WRITE_STATUS = TRUE\r
76 WRITE_LOCK_CAP = TRUE\r
77 WRITE_LOCK_STATUS = TRUE\r
78 READ_DISABLED_CAP = TRUE\r
79 READ_ENABLED_CAP = TRUE\r
80 READ_STATUS = TRUE\r
81 READ_LOCK_CAP = TRUE\r
82 READ_LOCK_STATUS = TRUE\r
83 \r
84 #\r
85 # Files to be placed in DXEFV\r
86 #\r
87 # This firmware volume will have files placed in it uncompressed,\r
88 # and then then entire firmware volume will be compressed in a\r
89 # single compression operation in order to achieve better\r
90 # overall compression.\r
91 #\r
92 \r
93 APRIORI DXE {\r
94 INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
95 INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
96 }\r
97 \r
98 #\r
99 # DXE Phase modules\r
100 #\r
101 INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
102 \r
103 INF IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf\r
104 INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
105 \r
106 INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
107 INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
108 INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
109 INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf\r
110 INF PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf\r
111 INF UefiCpuPkg/CpuIoDxe/CpuIo.inf\r
112 INF UefiCpuPkg/CpuDxe/CpuDxe.inf\r
113 INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf\r
114 INF PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf\r
115 INF IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf\r
116 INF PcAtChipsetPkg/KbcResetDxe/Reset.inf\r
117 INF MdeModulePkg/Universal/Metronome/Metronome.inf\r
118 INF PcAtChipsetPkg/PcRtc/RealTimeClock.inf\r
119 \r
120 INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
121 INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
122 INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
123 INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
124 INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
125 INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
126 INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
127 INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
128 INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf\r
129 INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
130 INF MdeModulePkg/Universal/PrintDxe/PrintDxe.inf\r
131 INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
132 INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
133 INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
134 INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf\r
135 INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf\r
136 INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf\r
137 INF PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf\r
138 INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
139 INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
140 \r
141 INF OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430Dxe.inf\r
142 \r
143 INF PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf\r
144 INF IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf\r
145 INF IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf\r
146 INF IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf\r
147 INF IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf\r
148 \r
149 INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf\r
150 INF MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf\r
151 INF RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf\r
152 \r
153 INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
154 \r
155 INF EdkShellBinPkg/FullShell/FullShell.inf\r
156 \r
157 FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D {\r
158 SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress\r
159 SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
160 }\r
161 }\r
162 \r
163 ################################################################################\r
164 \r
165 [FV.MAINFV]\r
166 FvAlignment = 16\r
167 ERASE_POLARITY = 1\r
168 MEMORY_MAPPED = TRUE\r
169 STICKY_WRITE = TRUE\r
170 LOCK_CAP = TRUE\r
171 LOCK_STATUS = TRUE\r
172 WRITE_DISABLED_CAP = TRUE\r
173 WRITE_ENABLED_CAP = TRUE\r
174 WRITE_STATUS = TRUE\r
175 WRITE_LOCK_CAP = TRUE\r
176 WRITE_LOCK_STATUS = TRUE\r
177 READ_DISABLED_CAP = TRUE\r
178 READ_ENABLED_CAP = TRUE\r
179 READ_STATUS = TRUE\r
180 READ_LOCK_CAP = TRUE\r
181 READ_LOCK_STATUS = TRUE\r
182 \r
183 #\r
184 # Files to be placed in MAINFV\r
185 #\r
186 # This firmware volume will have all the files placed in it which\r
187 # must not be compressed at the initial boot phase. The only\r
188 # exception to this is the compressed 'DXEFV'.\r
189 #\r
190 \r
191 APRIORI PEI {\r
192 INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
193 }\r
194 \r
195 #\r
196 # SEC Phase modules\r
197 #\r
198 INF OvmfPkg/Sec/SecMain.inf\r
199 \r
200 #\r
201 # PEI Phase modules\r
202 #\r
203 INF MdeModulePkg/Core/Pei/PeiMain.inf\r
204 INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
205 INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
206 INF OvmfPkg/PlatformPei/PlatformPei.inf\r
207 INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
208 \r
209 #\r
210 # This file contains the compressed 'DXEFV', which is compressed\r
211 # in a single compression operation in order to achieve better\r
212 # overall compression.\r
213 #\r
214 FILE FV_IMAGE = 20bc8ac9-94d1-4208-ab28-5d673fd73486 {\r
215 SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress\r
216 SECTION FV_IMAGE = DXEFV\r
217 }\r
218 }\r
219 \r
220 INF RuleOverride=RESET_VECTOR OvmfPkg/ResetVector/Bin/ResetVector.inf\r
221 \r
222 ################################################################################\r
223 #\r
224 # Rules are use with the [FV] section's module INF type to define\r
225 # how an FFS file is created for a given INF file. The following Rule are the default\r
226 # rules for the different module type. User can add the customized rules to define the\r
227 # content of the FFS file.\r
228 #\r
229 ################################################################################\r
230 \r
231 [Rule.Common.PEI_CORE]\r
232 FILE PEI_CORE = $(NAMED_GUID) {\r
233 PE32 PE32 |.efi\r
234 UI STRING ="$(MODULE_NAME)" Optional\r
235 VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
236 }\r
237 \r
238 [Rule.Common.SEC]\r
239 FILE SEC = $(NAMED_GUID) {\r
240 PE32 PE32 |.efi\r
241 UI STRING ="$(MODULE_NAME)" Optional\r
242 VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
243 }\r
244 \r
245 [Rule.Common.PEIM]\r
246 FILE PEIM = $(NAMED_GUID) {\r
247 PEI_DEPEX PEI_DEPEX Optional |.depex\r
248 PE32 PE32 |.efi\r
249 UI STRING="$(MODULE_NAME)" Optional\r
250 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
251 }\r
252 \r
253 [Rule.Common.PEIM.TIANOCOMPRESSED]\r
254 FILE PEIM = $(NAMED_GUID) {\r
255 PEI_DEPEX PEI_DEPEX Optional |.depex\r
256 GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
257 PE32 PE32 |.efi\r
258 UI STRING="$(MODULE_NAME)" Optional\r
259 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
260 }\r
261 }\r
262 \r
263 [Rule.Common.DXE_CORE]\r
264 FILE DXE_CORE = $(NAMED_GUID) {\r
265 PE32 PE32 |.efi\r
266 UI STRING="$(MODULE_NAME)" Optional\r
267 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
268 }\r
269 \r
270 [Rule.Common.UEFI_DRIVER]\r
271 FILE DRIVER = $(NAMED_GUID) {\r
272 DXE_DEPEX DXE_DEPEX Optional |.depex\r
273 PE32 PE32 |.efi\r
274 UI STRING="$(MODULE_NAME)" Optional\r
275 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
276 }\r
277 \r
278 [Rule.Common.DXE_DRIVER]\r
279 FILE DRIVER = $(NAMED_GUID) {\r
280 DXE_DEPEX DXE_DEPEX Optional |.depex\r
281 PE32 PE32 |.efi\r
282 UI STRING="$(MODULE_NAME)" Optional\r
283 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
284 }\r
285 \r
286 [Rule.Common.DXE_RUNTIME_DRIVER]\r
287 FILE DRIVER = $(NAMED_GUID) {\r
288 DXE_DEPEX DXE_DEPEX Optional |.depex\r
289 PE32 PE32 |.efi\r
290 UI STRING="$(MODULE_NAME)" Optional\r
291 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
292 }\r
293 \r
294 [Rule.Common.UEFI_APPLICATION]\r
295 FILE APPLICATION = $(NAMED_GUID) {\r
296 PE32 PE32 |.efi\r
297 UI STRING="$(MODULE_NAME)" Optional\r
298 VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
299 }\r
300 \r
301 [Rule.Common.DXE_DRIVER.ACPITABLE]\r
302 FILE FREEFORM = $(NAMED_GUID) {\r
303 RAW ACPI |.acpi\r
304 RAW ASL |.aml\r
305 }\r
306 \r
307 [Rule.Common.SEC.RESET_VECTOR]\r
308 FILE RAW = $(NAMED_GUID) {\r
309 RAW RAW |.raw\r
310 }\r
311 \r