Import libarchive 2.0.28.
[dragonfly/vkernel-mp.git] / contrib / libarchive-2.0 / libarchive / archive_read_support_compression_gzip.c
blob7386c9bca9102402c5a8b8080a4c5a5803a26e26
1 /*-
2 * Copyright (c) 2003-2007 Tim Kientzle
3 * All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
15 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17 * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
18 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 #include "archive_platform.h"
28 __FBSDID("$FreeBSD: src/lib/libarchive/archive_read_support_compression_gzip.c,v 1.14 2007/04/05 05:18:16 kientzle Exp $");
31 #ifdef HAVE_ERRNO_H
32 #include <errno.h>
33 #endif
34 #ifdef HAVE_STDLIB_H
35 #include <stdlib.h>
36 #endif
37 #ifdef HAVE_STRING_H
38 #include <string.h>
39 #endif
40 #ifdef HAVE_UNISTD_H
41 #include <unistd.h>
42 #endif
43 #ifdef HAVE_ZLIB_H
44 #include <zlib.h>
45 #endif
47 #include "archive.h"
48 #include "archive_private.h"
49 #include "archive_read_private.h"
51 #ifdef HAVE_ZLIB_H
52 struct private_data {
53 z_stream stream;
54 unsigned char *uncompressed_buffer;
55 size_t uncompressed_buffer_size;
56 unsigned char *read_next;
57 int64_t total_out;
58 unsigned long crc;
59 char header_done;
62 static int finish(struct archive_read *);
63 static ssize_t read_ahead(struct archive_read *, const void **, size_t);
64 static ssize_t read_consume(struct archive_read *, size_t);
65 static int drive_decompressor(struct archive_read *a, struct private_data *);
66 #endif
68 /* These two functions are defined even if we lack zlib. See below. */
69 static int bid(const void *, size_t);
70 static int init(struct archive_read *, const void *, size_t);
72 int
73 archive_read_support_compression_gzip(struct archive *_a)
75 struct archive_read *a = (struct archive_read *)_a;
76 return (__archive_read_register_compression(a, bid, init));
80 * Test whether we can handle this data.
82 * This logic returns zero if any part of the signature fails. It
83 * also tries to Do The Right Thing if a very short buffer prevents us
84 * from verifying as much as we would like.
86 static int
87 bid(const void *buff, size_t len)
89 const unsigned char *buffer;
90 int bits_checked;
92 if (len < 1)
93 return (0);
95 buffer = (const unsigned char *)buff;
96 bits_checked = 0;
97 if (buffer[0] != 037) /* Verify first ID byte. */
98 return (0);
99 bits_checked += 8;
100 if (len < 2)
101 return (bits_checked);
103 if (buffer[1] != 0213) /* Verify second ID byte. */
104 return (0);
105 bits_checked += 8;
106 if (len < 3)
107 return (bits_checked);
109 if (buffer[2] != 8) /* Compression must be 'deflate'. */
110 return (0);
111 bits_checked += 8;
112 if (len < 4)
113 return (bits_checked);
115 if ((buffer[3] & 0xE0)!= 0) /* No reserved flags set. */
116 return (0);
117 bits_checked += 3;
118 if (len < 5)
119 return (bits_checked);
122 * TODO: Verify more; in particular, gzip has an optional
123 * header CRC, which would give us 16 more verified bits. We
124 * may also be able to verify certain constraints on other
125 * fields.
128 return (bits_checked);
132 #ifndef HAVE_ZLIB_H
135 * If we don't have zlib on this system, we can't actually do the
136 * decompression. We can, however, still detect gzip-compressed
137 * archives and emit a useful message.
139 static int
140 init(struct archive_read *a, const void *buff, size_t n)
142 (void)a; /* UNUSED */
143 (void)buff; /* UNUSED */
144 (void)n; /* UNUSED */
146 archive_set_error(a, -1,
147 "This version of libarchive was compiled without gzip support");
148 return (ARCHIVE_FATAL);
152 #else
155 * Setup the callbacks.
157 static int
158 init(struct archive_read *a, const void *buff, size_t n)
160 struct private_data *state;
161 int ret;
163 a->archive.compression_code = ARCHIVE_COMPRESSION_GZIP;
164 a->archive.compression_name = "gzip";
166 state = (struct private_data *)malloc(sizeof(*state));
167 if (state == NULL) {
168 archive_set_error(&a->archive, ENOMEM,
169 "Can't allocate data for %s decompression",
170 a->archive.compression_name);
171 return (ARCHIVE_FATAL);
173 memset(state, 0, sizeof(*state));
175 state->crc = crc32(0L, NULL, 0);
176 state->header_done = 0; /* We've not yet begun to parse header... */
178 state->uncompressed_buffer_size = 64 * 1024;
179 state->uncompressed_buffer = (unsigned char *)malloc(state->uncompressed_buffer_size);
180 state->stream.next_out = state->uncompressed_buffer;
181 state->read_next = state->uncompressed_buffer;
182 state->stream.avail_out = state->uncompressed_buffer_size;
184 if (state->uncompressed_buffer == NULL) {
185 archive_set_error(&a->archive, ENOMEM,
186 "Can't allocate %s decompression buffers",
187 a->archive.compression_name);
188 free(state);
189 return (ARCHIVE_FATAL);
193 * A bug in zlib.h: stream.next_in should be marked 'const'
194 * but isn't (the library never alters data through the
195 * next_in pointer, only reads it). The result: this ugly
196 * cast to remove 'const'.
198 state->stream.next_in = (Bytef *)(uintptr_t)(const void *)buff;
199 state->stream.avail_in = n;
201 a->compression_read_ahead = read_ahead;
202 a->compression_read_consume = read_consume;
203 a->compression_skip = NULL; /* not supported */
204 a->compression_finish = finish;
207 * TODO: Do I need to parse the gzip header before calling
208 * inflateInit2()? In particular, one of the header bytes
209 * marks "best compression" or "fastest", which may be
210 * appropriate for setting the second parameter here.
211 * However, I think the only penalty for not setting it
212 * correctly is wasted memory. If this is necessary, it
213 * should probably go into drive_decompressor() below.
216 /* Initialize compression library. */
217 ret = inflateInit2(&(state->stream),
218 -15 /* Don't check for zlib header */);
219 if (ret == Z_OK) {
220 a->compression_data = state;
221 return (ARCHIVE_OK);
224 /* Library setup failed: Clean up. */
225 archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
226 "Internal error initializing %s library",
227 a->archive.compression_name);
228 free(state->uncompressed_buffer);
229 free(state);
231 /* Override the error message if we know what really went wrong. */
232 switch (ret) {
233 case Z_STREAM_ERROR:
234 archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
235 "Internal error initializing compression library: "
236 "invalid setup parameter");
237 break;
238 case Z_MEM_ERROR:
239 archive_set_error(&a->archive, ENOMEM,
240 "Internal error initializing compression library: "
241 "out of memory");
242 break;
243 case Z_VERSION_ERROR:
244 archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
245 "Internal error initializing compression library: "
246 "invalid library version");
247 break;
250 return (ARCHIVE_FATAL);
254 * Return a block of data from the decompression buffer. Decompress more
255 * as necessary.
257 static ssize_t
258 read_ahead(struct archive_read *a, const void **p, size_t min)
260 struct private_data *state;
261 size_t read_avail, was_avail;
262 int ret;
264 state = (struct private_data *)a->compression_data;
265 if (!a->client_reader) {
266 archive_set_error(&a->archive, ARCHIVE_ERRNO_PROGRAMMER,
267 "No read callback is registered? "
268 "This is probably an internal programming error.");
269 return (ARCHIVE_FATAL);
272 read_avail = state->stream.next_out - state->read_next;
274 if (read_avail + state->stream.avail_out < min) {
275 memmove(state->uncompressed_buffer, state->read_next,
276 read_avail);
277 state->read_next = state->uncompressed_buffer;
278 state->stream.next_out = state->read_next + read_avail;
279 state->stream.avail_out
280 = state->uncompressed_buffer_size - read_avail;
283 while (read_avail < min && /* Haven't satisfied min. */
284 read_avail < state->uncompressed_buffer_size) { /* !full */
285 was_avail = read_avail;
286 if ((ret = drive_decompressor(a, state)) != ARCHIVE_OK)
287 return (ret);
288 read_avail = state->stream.next_out - state->read_next;
289 if (was_avail == read_avail) /* No progress? */
290 break;
293 *p = state->read_next;
294 return (read_avail);
298 * Mark a previously-returned block of data as read.
300 static ssize_t
301 read_consume(struct archive_read *a, size_t n)
303 struct private_data *state;
305 state = (struct private_data *)a->compression_data;
306 a->archive.file_position += n;
307 state->read_next += n;
308 if (state->read_next > state->stream.next_out)
309 __archive_errx(1, "Request to consume too many "
310 "bytes from gzip decompressor");
311 return (n);
315 * Clean up the decompressor.
317 static int
318 finish(struct archive_read *a)
320 struct private_data *state;
321 int ret;
323 state = (struct private_data *)a->compression_data;
324 ret = ARCHIVE_OK;
325 switch (inflateEnd(&(state->stream))) {
326 case Z_OK:
327 break;
328 default:
329 archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
330 "Failed to clean up %s compressor",
331 a->archive.compression_name);
332 ret = ARCHIVE_FATAL;
335 free(state->uncompressed_buffer);
336 free(state);
338 a->compression_data = NULL;
339 if (a->client_closer != NULL)
340 (a->client_closer)(&a->archive, a->client_data);
342 return (ret);
346 * Utility function to pull data through decompressor, reading input
347 * blocks as necessary.
349 static int
350 drive_decompressor(struct archive_read *a, struct private_data *state)
352 ssize_t ret;
353 size_t decompressed, total_decompressed;
354 int count, flags, header_state;
355 unsigned char *output;
356 unsigned char b;
357 const void *read_buf;
359 flags = 0;
360 count = 0;
361 header_state = 0;
362 total_decompressed = 0;
363 for (;;) {
364 if (state->stream.avail_in == 0) {
365 read_buf = state->stream.next_in;
366 ret = (a->client_reader)(&a->archive, a->client_data,
367 &read_buf);
368 state->stream.next_in = (unsigned char *)(uintptr_t)read_buf;
369 if (ret < 0) {
371 * TODO: Find a better way to handle
372 * this read failure.
374 goto fatal;
376 if (ret == 0 && total_decompressed == 0) {
377 archive_set_error(&a->archive, EIO,
378 "Premature end of %s compressed data",
379 a->archive.compression_name);
380 return (ARCHIVE_FATAL);
382 a->archive.raw_position += ret;
383 state->stream.avail_in = ret;
386 if (!state->header_done) {
388 * If still parsing the header, interpret the
389 * next byte.
391 b = *(state->stream.next_in++);
392 state->stream.avail_in--;
395 * Yes, this is somewhat crude, but it works,
396 * GZip format isn't likely to change anytime
397 * in the near future, and header parsing is
398 * certainly not a performance issue, so
399 * there's little point in making this more
400 * elegant. Of course, if you see an easy way
401 * to make this more elegant, please let me
402 * know.. ;-)
404 switch (header_state) {
405 case 0: /* First byte of signature. */
406 if (b != 037)
407 goto fatal;
408 header_state = 1;
409 break;
410 case 1: /* Second byte of signature. */
411 if (b != 0213)
412 goto fatal;
413 header_state = 2;
414 break;
415 case 2: /* Compression type must be 8. */
416 if (b != 8)
417 goto fatal;
418 header_state = 3;
419 break;
420 case 3: /* GZip flags. */
421 flags = b;
422 header_state = 4;
423 break;
424 case 4: case 5: case 6: case 7: /* Mod time. */
425 header_state++;
426 break;
427 case 8: /* Deflate flags. */
428 header_state = 9;
429 break;
430 case 9: /* OS. */
431 header_state = 10;
432 break;
433 case 10: /* Optional Extra: First byte of Length. */
434 if ((flags & 4)) {
435 count = 255 & (int)b;
436 header_state = 11;
437 break;
440 * Fall through if there is no
441 * Optional Extra field.
443 case 11: /* Optional Extra: Second byte of Length. */
444 if ((flags & 4)) {
445 count = (0xff00 & ((int)b << 8)) | count;
446 header_state = 12;
447 break;
450 * Fall through if there is no
451 * Optional Extra field.
453 case 12: /* Optional Extra Field: counted length. */
454 if ((flags & 4)) {
455 --count;
456 if (count == 0) header_state = 13;
457 else header_state = 12;
458 break;
461 * Fall through if there is no
462 * Optional Extra field.
464 case 13: /* Optional Original Filename. */
465 if ((flags & 8)) {
466 if (b == 0) header_state = 14;
467 else header_state = 13;
468 break;
471 * Fall through if no Optional
472 * Original Filename.
474 case 14: /* Optional Comment. */
475 if ((flags & 16)) {
476 if (b == 0) header_state = 15;
477 else header_state = 14;
478 break;
480 /* Fall through if no Optional Comment. */
481 case 15: /* Optional Header CRC: First byte. */
482 if ((flags & 2)) {
483 header_state = 16;
484 break;
486 /* Fall through if no Optional Header CRC. */
487 case 16: /* Optional Header CRC: Second byte. */
488 if ((flags & 2)) {
489 header_state = 17;
490 break;
492 /* Fall through if no Optional Header CRC. */
493 case 17: /* First byte of compressed data. */
494 state->header_done = 1; /* done with header */
495 state->stream.avail_in++;
496 state->stream.next_in--;
500 * TODO: Consider moving the inflateInit2 call
501 * here so it can include the compression type
502 * from the header?
504 } else {
505 output = state->stream.next_out;
507 /* Decompress some data. */
508 ret = inflate(&(state->stream), 0);
509 decompressed = state->stream.next_out - output;
511 /* Accumulate the CRC of the uncompressed data. */
512 state->crc = crc32(state->crc, output, decompressed);
514 /* Accumulate the total bytes of output. */
515 state->total_out += decompressed;
516 total_decompressed += decompressed;
518 switch (ret) {
519 case Z_OK: /* Decompressor made some progress. */
520 if (decompressed > 0)
521 return (ARCHIVE_OK);
522 break;
523 case Z_STREAM_END: /* Found end of stream. */
525 * TODO: Verify gzip trailer
526 * (uncompressed length and CRC).
528 return (ARCHIVE_OK);
529 default:
530 /* Any other return value is an error. */
531 archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
532 "gzip decompression failed (%s)",
533 state->stream.msg);
534 goto fatal;
538 return (ARCHIVE_OK);
540 /* Return a fatal error. */
541 fatal:
542 archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
543 "%s decompression failed", a->archive.compression_name);
544 return (ARCHIVE_FATAL);
547 #endif /* HAVE_ZLIB_H */