2 * Copyright (c) 2001 Atsushi Onoe
3 * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
17 * Alternatively, this software may be distributed under the terms of the
18 * GNU General Public License ("GPL") version 2 as published by the Free
19 * Software Foundation.
21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 * $FreeBSD: src/sys/net80211/ieee80211_proto.h,v 1.11.2.5 2006/02/12 19:00:39 sam Exp $
33 * $DragonFly: src/sys/netproto/802_11/ieee80211_proto.h,v 1.12 2007/04/26 12:59:14 sephe Exp $
35 #ifndef _NET80211_IEEE80211_PROTO_H_
36 #define _NET80211_IEEE80211_PROTO_H_
39 * 802.11 protocol implementation definitions.
42 enum ieee80211_state
{
43 IEEE80211_S_INIT
= 0, /* default state */
44 IEEE80211_S_SCAN
= 1, /* scanning */
45 IEEE80211_S_AUTH
= 2, /* try to authenticate */
46 IEEE80211_S_ASSOC
= 3, /* try to assoc */
47 IEEE80211_S_RUN
= 4, /* associated */
49 #define IEEE80211_S_MAX (IEEE80211_S_RUN+1)
51 #define IEEE80211_SEND_MGMT(_ic,_ni,_type,_arg) \
52 ((*(_ic)->ic_send_mgmt)(_ic, _ni, _type, _arg))
54 extern const char *ieee80211_mgt_subtype_name
[];
55 extern const char *ieee80211_phymode_name
[];
57 void ieee80211_proto_attach(struct ieee80211com
*);
58 void ieee80211_proto_detach(struct ieee80211com
*);
60 struct ieee80211_node
;
61 int ieee80211_input(struct ieee80211com
*, struct mbuf
*,
62 struct ieee80211_node
*, int, uint32_t);
63 int ieee80211_setup_rates(struct ieee80211_node
*ni
,
64 const uint8_t *rates
, const uint8_t *xrates
,
66 void ieee80211_saveie(uint8_t **, const uint8_t *);
67 void ieee80211_recv_mgmt(struct ieee80211com
*, struct mbuf
*,
68 struct ieee80211_node
*, int, int, uint32_t);
69 int ieee80211_send_nulldata(struct ieee80211_node
*);
70 int ieee80211_send_probereq(struct ieee80211_node
*ni
,
71 const uint8_t sa
[IEEE80211_ADDR_LEN
],
72 const uint8_t da
[IEEE80211_ADDR_LEN
],
73 const uint8_t bssid
[IEEE80211_ADDR_LEN
],
74 const uint8_t *ssid
, size_t ssidlen
,
75 const void *optie
, size_t optielen
);
76 int ieee80211_send_mgmt(struct ieee80211com
*, struct ieee80211_node
*,
78 int ieee80211_classify(struct ieee80211com
*, struct mbuf
*,
79 struct ieee80211_node
*);
80 struct mbuf
*ieee80211_encap(struct ieee80211com
*, struct mbuf
*,
81 struct ieee80211_node
*);
82 void ieee80211_pwrsave(struct ieee80211com
*, struct ieee80211_node
*,
85 void ieee80211_reset_erp(struct ieee80211com
*);
86 void ieee80211_set_shortslottime(struct ieee80211com
*, int);
87 void ieee80211_set_shortpreamble(struct ieee80211com
*, int);
88 int ieee80211_iserp_rateset(struct ieee80211com
*,
89 const struct ieee80211_rateset
*);
90 void ieee80211_set_basicrates(struct ieee80211_rateset
*,
91 enum ieee80211_phymode
, int);
92 int ieee80211_copy_basicrates(struct ieee80211_rateset
*,
93 const struct ieee80211_rateset
*);
96 * Return the size of the 802.11 header for a management or data frame.
99 ieee80211_hdrsize(const void *data
)
101 const struct ieee80211_frame
*wh
= data
;
102 int size
= sizeof(struct ieee80211_frame
);
104 /* NB: we don't handle control frames */
105 KASSERT((wh
->i_fc
[0]&IEEE80211_FC0_TYPE_MASK
) != IEEE80211_FC0_TYPE_CTL
,
106 ("%s: control frame", __func__
));
107 if ((wh
->i_fc
[1] & IEEE80211_FC1_DIR_MASK
) == IEEE80211_FC1_DIR_DSTODS
)
108 size
+= IEEE80211_ADDR_LEN
;
109 if (IEEE80211_QOS_HAS_SEQ(wh
))
110 size
+= sizeof(uint16_t);
115 * Return the size of the 802.11 header; handles any type of frame.
118 ieee80211_anyhdrsize(const void *data
)
120 const struct ieee80211_frame
*wh
= data
;
122 if ((wh
->i_fc
[0]&IEEE80211_FC0_TYPE_MASK
) == IEEE80211_FC0_TYPE_CTL
) {
123 switch (wh
->i_fc
[0] & IEEE80211_FC0_SUBTYPE_MASK
) {
124 case IEEE80211_FC0_SUBTYPE_CTS
:
125 case IEEE80211_FC0_SUBTYPE_ACK
:
126 return sizeof(struct ieee80211_frame_ack
);
128 return sizeof(struct ieee80211_frame_min
);
130 return ieee80211_hdrsize(data
);
134 * Template for an in-kernel authenticator. Authenticators
135 * register with the protocol code and are typically loaded
136 * as separate modules as needed.
138 struct ieee80211_authenticator
{
139 const char *ia_name
; /* printable name */
140 int (*ia_attach
)(struct ieee80211com
*);
141 void (*ia_detach
)(struct ieee80211com
*);
142 void (*ia_node_join
)(struct ieee80211com
*,
143 struct ieee80211_node
*);
144 void (*ia_node_leave
)(struct ieee80211com
*,
145 struct ieee80211_node
*);
147 void ieee80211_authenticator_register(int type
,
148 const struct ieee80211_authenticator
*);
149 void ieee80211_authenticator_unregister(int type
);
150 const struct ieee80211_authenticator
*ieee80211_authenticator_get(int auth
);
154 * Template for an MAC ACL policy module. Such modules
155 * register with the protocol code and are passed the sender's
156 * address of each received frame for validation.
158 struct ieee80211_aclator
{
159 const char *iac_name
; /* printable name */
160 int (*iac_attach
)(struct ieee80211com
*);
161 void (*iac_detach
)(struct ieee80211com
*);
162 int (*iac_check
)(struct ieee80211com
*,
163 const uint8_t mac
[IEEE80211_ADDR_LEN
]);
164 int (*iac_add
)(struct ieee80211com
*,
165 const uint8_t mac
[IEEE80211_ADDR_LEN
]);
166 int (*iac_remove
)(struct ieee80211com
*,
167 const uint8_t mac
[IEEE80211_ADDR_LEN
]);
168 int (*iac_flush
)(struct ieee80211com
*);
169 int (*iac_setpolicy
)(struct ieee80211com
*, int);
170 int (*iac_getpolicy
)(struct ieee80211com
*);
171 int (*iac_setioctl
)(struct ieee80211com
*, struct ieee80211req
*);
172 int (*iac_getioctl
)(struct ieee80211com
*, struct ieee80211req
*);
174 void ieee80211_aclator_register(const struct ieee80211_aclator
*);
175 void ieee80211_aclator_unregister(const struct ieee80211_aclator
*);
176 const struct ieee80211_aclator
*ieee80211_aclator_get(const char *name
);
178 /* flags for ieee80211_fix_rate() */
179 #define IEEE80211_F_DOSORT 0x00000001 /* sort rate list */
180 #define IEEE80211_F_DOFRATE 0x00000002 /* use fixed rate */
181 #define IEEE80211_F_DONEGO 0x00000004 /* calc negotiated rate */
182 #define IEEE80211_F_DODEL 0x00000008 /* delete ignore rate */
183 int ieee80211_fix_rate(struct ieee80211_node
*ni
, int flags
, int join
);
191 uint8_t wmep_logcwmin
; /* log2(cwmin) */
192 uint8_t wmep_logcwmax
; /* log2(cwmax) */
193 uint8_t wmep_txopLimit
;
194 uint8_t wmep_noackPolicy
; /* 0 (ack), 1 (no ack) */
196 #define IEEE80211_TXOP_TO_US(_txop) ((_txop)<<5)
197 #define IEEE80211_US_TO_TXOP(_us) ((_us)>>5)
199 struct chanAccParams
{
200 uint8_t cap_info
; /* version of the current set */
201 struct wmeParams cap_wmeParams
[WME_NUM_AC
];
204 struct ieee80211_wme_state
{
206 #define WME_F_AGGRMODE 0x00000001 /* STATUS: WME agressive mode */
207 u_int wme_hipri_traffic
; /* VI/VO frames in beacon interval */
208 u_int wme_hipri_switch_thresh
;/* agressive mode switch thresh */
209 u_int wme_hipri_switch_hysteresis
;/* agressive mode switch hysteresis */
211 struct wmeParams wme_params
[4]; /* from assoc resp for each AC*/
212 struct chanAccParams wme_wmeChanParams
; /* WME params applied to self */
213 struct chanAccParams wme_wmeBssChanParams
;/* WME params bcast to stations */
214 struct chanAccParams wme_chanParams
; /* params applied to self */
215 struct chanAccParams wme_bssChanParams
; /* params bcast to stations */
217 int (*wme_update
)(struct ieee80211com
*);
220 void ieee80211_wme_initparams(struct ieee80211com
*);
221 void ieee80211_wme_updateparams(struct ieee80211com
*);
223 #define ieee80211_new_state(_ic, _nstate, _arg) \
224 (((_ic)->ic_newstate)((_ic), (_nstate), (_arg)))
225 void ieee80211_reset_state(struct ieee80211com
*, enum ieee80211_state
);
226 void ieee80211_beacon_miss(struct ieee80211com
*);
227 void ieee80211_print_essid(const uint8_t *, int);
228 void ieee80211_print_rateset(const struct ieee80211_rateset
*);
229 void ieee80211_dump_pkt(const uint8_t *, int, int, int);
231 extern const char *ieee80211_state_name
[IEEE80211_S_MAX
];
232 extern const char *ieee80211_wme_acnames
[];
235 * Beacon frames constructed by ieee80211_beacon_alloc
236 * have the following structure filled in so drivers
237 * can update the frame later w/ minimal overhead.
239 struct ieee80211_beacon_offsets
{
240 uint16_t *bo_caps
; /* capabilities */
241 uint8_t *bo_tim
; /* start of atim/dtim */
242 uint8_t *bo_wme
; /* start of WME parameters */
243 uint8_t *bo_trailer
; /* start of fixed-size trailer */
244 uint16_t bo_tim_len
; /* atim/dtim length in bytes */
245 uint16_t bo_trailer_len
; /* trailer length in bytes */
246 uint8_t *bo_erp
; /* start of ERP element */
247 void *bo_pad
[8]; /* future expansion */
249 struct mbuf
*ieee80211_beacon_alloc(struct ieee80211com
*,
250 struct ieee80211_node
*, struct ieee80211_beacon_offsets
*);
251 int ieee80211_beacon_update(struct ieee80211com
*,
252 struct ieee80211_node
*, struct ieee80211_beacon_offsets
*,
253 struct mbuf
*, int broadcast
);
255 struct mbuf
*ieee80211_probe_resp_alloc(struct ieee80211com
*,
256 struct ieee80211_node
*);
258 uint8_t ieee80211_ack_rate(struct ieee80211_node
*, uint8_t);
259 uint16_t ieee80211_txtime(struct ieee80211_node
*, u_int
, uint8_t,
263 * Notification methods called from the 802.11 state machine.
264 * Note that while these are defined here, their implementation
267 void ieee80211_notify_node_join(struct ieee80211com
*,
268 struct ieee80211_node
*, int newassoc
);
269 void ieee80211_notify_node_leave(struct ieee80211com
*,
270 struct ieee80211_node
*);
271 void ieee80211_notify_scan_done(struct ieee80211com
*);
272 #endif /* _NET80211_IEEE80211_PROTO_H_ */