2 * Copyright (c) 2007 The DragonFly Project. All rights reserved.
4 * This code is derived from software contributed to The DragonFly Project
5 * by Matthew Dillon <dillon@backplane.com>
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in
15 * the documentation and/or other materials provided with the
17 * 3. Neither the name of The DragonFly Project nor the names of its
18 * contributors may be used to endorse or promote products derived
19 * from this software without specific, prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
24 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
25 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
27 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
28 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
29 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * $DragonFly: src/sys/dev/disk/ccd/ccd.c,v 1.49 2007/07/11 23:42:16 dillon Exp $
37 * Copyright (c) 1995 Jason R. Thorpe.
38 * All rights reserved.
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
43 * 1. Redistributions of source code must retain the above copyright
44 * notice, this list of conditions and the following disclaimer.
45 * 2. Redistributions in binary form must reproduce the above copyright
46 * notice, this list of conditions and the following disclaimer in the
47 * documentation and/or other materials provided with the distribution.
48 * 3. All advertising materials mentioning features or use of this software
49 * must display the following acknowledgement:
50 * This product includes software developed for the NetBSD Project
52 * 4. The name of the author may not be used to endorse or promote products
53 * derived from this software without specific prior written permission.
55 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
56 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
57 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
58 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
59 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
60 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
61 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
62 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
63 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
64 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
69 * Copyright (c) 1988 University of Utah.
70 * Copyright (c) 1990, 1993
71 * The Regents of the University of California. All rights reserved.
73 * This code is derived from software contributed to Berkeley by
74 * the Systems Programming Group of the University of Utah Computer
77 * Redistribution and use in source and binary forms, with or without
78 * modification, are permitted provided that the following conditions
80 * 1. Redistributions of source code must retain the above copyright
81 * notice, this list of conditions and the following disclaimer.
82 * 2. Redistributions in binary form must reproduce the above copyright
83 * notice, this list of conditions and the following disclaimer in the
84 * documentation and/or other materials provided with the distribution.
85 * 3. All advertising materials mentioning features or use of this software
86 * must display the following acknowledgement:
87 * This product includes software developed by the University of
88 * California, Berkeley and its contributors.
89 * 4. Neither the name of the University nor the names of its contributors
90 * may be used to endorse or promote products derived from this software
91 * without specific prior written permission.
93 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
94 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
95 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
96 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
97 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
98 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
99 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
100 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
101 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
102 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
105 * from: Utah $Hdr: cd.c 1.6 90/11/28$
108 * @(#)cd.c 8.2 (Berkeley) 11/16/93
109 * $FreeBSD: src/sys/dev/ccd/ccd.c,v 1.73.2.1 2001/09/11 09:49:52 kris Exp $
110 * $NetBSD: ccd.c,v 1.22 1995/12/08 19:13:26 thorpej Exp $
111 * $DragonFly: src/sys/dev/disk/ccd/ccd.c,v 1.49 2007/07/11 23:42:16 dillon Exp $
115 * "Concatenated" disk driver.
117 * Original dynamic configuration support by:
118 * Jason R. Thorpe <thorpej@nas.nasa.gov>
119 * Numerical Aerodynamic Simulation Facility
121 * NASA Ames Research Center
122 * Moffett Field, CA 94035
127 #include <sys/param.h>
128 #include <sys/systm.h>
129 #include <sys/kernel.h>
130 #include <sys/module.h>
131 #include <sys/proc.h>
133 #include <sys/malloc.h>
134 #include <sys/nlookup.h>
135 #include <sys/conf.h>
136 #include <sys/stat.h>
137 #include <sys/sysctl.h>
138 #include <sys/disk.h>
139 #include <sys/dtype.h>
140 #include <sys/diskslice.h>
141 #include <sys/devicestat.h>
142 #include <sys/fcntl.h>
143 #include <sys/vnode.h>
144 #include <sys/buf2.h>
145 #include <sys/ccdvar.h>
147 #include <vm/vm_zone.h>
149 #include <vfs/ufs/dinode.h> /* XXX Used only for fs.h */
150 #include <vfs/ufs/fs.h> /* XXX used only to get BBSIZE and SBSIZE */
152 #include <sys/thread2.h>
154 #if defined(CCDDEBUG) && !defined(DEBUG)
159 #define CCDB_FOLLOW 0x01
160 #define CCDB_INIT 0x02
162 #define CCDB_LABEL 0x08
163 #define CCDB_VNODE 0x10
164 static int ccddebug
= CCDB_FOLLOW
| CCDB_INIT
| CCDB_IO
| CCDB_LABEL
|
166 SYSCTL_INT(_debug
, OID_AUTO
, ccddebug
, CTLFLAG_RW
, &ccddebug
, 0, "");
170 #define ccdunit(x) dkunit(x)
171 #define ccdpart(x) dkpart(x)
174 This is how mirroring works (only writes are special):
176 When initiating a write, ccdbuffer() returns two "struct ccdbuf *"s
177 linked together by the cb_mirror field. "cb_pflags &
178 CCDPF_MIRROR_DONE" is set to 0 on both of them.
180 When a component returns to ccdiodone(), it checks if "cb_pflags &
181 CCDPF_MIRROR_DONE" is set or not. If not, it sets the partner's
182 flag and returns. If it is, it means its partner has already
183 returned, so it will go to the regular cleanup.
188 struct buf cb_buf
; /* new I/O buf */
189 struct vnode
*cb_vp
; /* related vnode */
190 struct bio
*cb_obio
; /* ptr. to original I/O buf */
191 struct ccdbuf
*cb_freenext
; /* free list link */
192 int cb_unit
; /* target unit */
193 int cb_comp
; /* target component */
194 int cb_pflags
; /* mirror/parity status flag */
195 struct ccdbuf
*cb_mirror
; /* mirror counterpart */
198 /* bits in cb_pflags */
199 #define CCDPF_MIRROR_DONE 1 /* if set, mirror counterpart is done */
201 static d_open_t ccdopen
;
202 static d_close_t ccdclose
;
203 static d_strategy_t ccdstrategy
;
204 static d_ioctl_t ccdioctl
;
205 static d_dump_t ccddump
;
207 #define NCCDFREEHIWAT 16
209 #define CDEV_MAJOR 74
211 static struct dev_ops ccd_ops
= {
212 { "ccd", CDEV_MAJOR
, D_DISK
},
216 .d_write
= physwrite
,
218 .d_strategy
= ccdstrategy
,
222 /* called during module initialization */
223 static void ccdattach (void);
224 static int ccd_modevent (module_t
, int, void *);
226 /* called by biodone() at interrupt time */
227 static void ccdiodone (struct bio
*bio
);
229 static void ccdstart (struct ccd_softc
*, struct bio
*);
230 static void ccdinterleave (struct ccd_softc
*, int);
231 static void ccdintr (struct ccd_softc
*, struct bio
*);
232 static int ccdinit (struct ccddevice
*, char **, struct ucred
*);
233 static int ccdlookup (char *, struct vnode
**);
234 static void ccdbuffer (struct ccdbuf
**ret
, struct ccd_softc
*,
235 struct bio
*, off_t
, caddr_t
, long);
236 static int ccdlock (struct ccd_softc
*);
237 static void ccdunlock (struct ccd_softc
*);
240 static void printiinfo (struct ccdiinfo
*);
243 /* Non-private for the benefit of libkvm. */
244 struct ccd_softc
*ccd_softc
;
245 struct ccddevice
*ccddevs
;
246 struct ccdbuf
*ccdfreebufs
;
247 static int numccdfreebufs
;
248 static int numccd
= 0;
251 * getccdbuf() - Allocate and zero a ccd buffer.
253 * This routine is called at splbio().
263 * Allocate from freelist or malloc as necessary
265 if ((cbp
= ccdfreebufs
) != NULL
) {
266 ccdfreebufs
= cbp
->cb_freenext
;
268 reinitbufbio(&cbp
->cb_buf
);
270 cbp
= kmalloc(sizeof(struct ccdbuf
), M_DEVBUF
, M_WAITOK
|M_ZERO
);
271 initbufbio(&cbp
->cb_buf
);
275 * independant struct buf initialization
277 LIST_INIT(&cbp
->cb_buf
.b_dep
);
278 BUF_LOCKINIT(&cbp
->cb_buf
);
279 BUF_LOCK(&cbp
->cb_buf
, LK_EXCLUSIVE
);
280 BUF_KERNPROC(&cbp
->cb_buf
);
281 cbp
->cb_buf
.b_flags
= B_PAGING
| B_BNOCLIP
;
287 * putccdbuf() - Free a ccd buffer.
289 * This routine is called at splbio().
294 putccdbuf(struct ccdbuf
*cbp
)
296 BUF_UNLOCK(&cbp
->cb_buf
);
297 BUF_LOCKFREE(&cbp
->cb_buf
);
299 if (numccdfreebufs
< NCCDFREEHIWAT
) {
300 cbp
->cb_freenext
= ccdfreebufs
;
304 kfree((caddr_t
)cbp
, M_DEVBUF
);
309 * Called by main() during pseudo-device attachment. All we need
310 * to do is allocate enough space for devices to be configured later, and
316 struct disk_info info
;
317 struct ccd_softc
*cs
;
322 kprintf("ccd0-%d: Concatenated disk drivers\n", num
-1);
324 kprintf("ccd0: Concatenated disk driver\n");
326 ccd_softc
= kmalloc(num
* sizeof(struct ccd_softc
), M_DEVBUF
,
328 ccddevs
= kmalloc(num
* sizeof(struct ccddevice
), M_DEVBUF
,
333 * With normal disk devices the open simply fails if the media
334 * is not present. With CCD we have to be able to open the
335 * raw disk to use the ioctl's to set it up, so create a dummy
336 * disk info structure so dscheck() doesn't blow up.
338 bzero(&info
, sizeof(info
));
339 info
.d_media_blksize
= DEV_BSIZE
;
341 for (i
= 0; i
< numccd
; ++i
) {
343 cs
->sc_dev
= disk_create(i
, &cs
->sc_disk
, &ccd_ops
);
344 cs
->sc_dev
->si_drv1
= cs
;
345 cs
->sc_dev
->si_iosize_max
= 256 * 512; /* XXX */
346 disk_setdiskinfo(&cs
->sc_disk
, &info
);
351 ccd_modevent(module_t mod
, int type
, void *data
)
361 kprintf("ccd0: Unload not supported!\n");
365 default: /* MOD_SHUTDOWN etc */
371 DEV_MODULE(ccd
, ccd_modevent
, NULL
);
374 ccdinit(struct ccddevice
*ccd
, char **cpaths
, struct ucred
*cred
)
376 struct ccd_softc
*cs
= &ccd_softc
[ccd
->ccd_unit
];
377 struct ccdcinfo
*ci
= NULL
; /* XXX */
384 struct partinfo dpart
;
385 struct ccdgeom
*ccg
= &cs
->sc_geom
;
386 char tmppath
[MAXPATHLEN
];
390 if (ccddebug
& (CCDB_FOLLOW
|CCDB_INIT
))
391 kprintf("ccdinit: unit %d\n", ccd
->ccd_unit
);
395 cs
->sc_ileave
= ccd
->ccd_interleave
;
396 cs
->sc_nccdisks
= ccd
->ccd_ndev
;
398 /* Allocate space for the component info. */
399 cs
->sc_cinfo
= kmalloc(cs
->sc_nccdisks
* sizeof(struct ccdcinfo
),
401 cs
->sc_maxiosize
= MAXPHYS
;
404 * Verify that each component piece exists and record
405 * relevant information about it.
409 for (ix
= 0; ix
< cs
->sc_nccdisks
; ix
++) {
410 vp
= ccd
->ccd_vpp
[ix
];
411 ci
= &cs
->sc_cinfo
[ix
];
415 * Copy in the pathname of the component.
417 bzero(tmppath
, sizeof(tmppath
)); /* sanity */
418 if ((error
= copyinstr(cpaths
[ix
], tmppath
,
419 MAXPATHLEN
, &ci
->ci_pathlen
)) != 0) {
421 if (ccddebug
& (CCDB_FOLLOW
|CCDB_INIT
))
422 kprintf("ccd%d: can't copy path, error = %d\n",
423 ccd
->ccd_unit
, error
);
427 ci
->ci_path
= kmalloc(ci
->ci_pathlen
, M_DEVBUF
, M_WAITOK
);
428 bcopy(tmppath
, ci
->ci_path
, ci
->ci_pathlen
);
430 ci
->ci_dev
= vn_todev(vp
);
431 if (ci
->ci_dev
->si_iosize_max
&&
432 cs
->sc_maxiosize
> ci
->ci_dev
->si_iosize_max
) {
433 cs
->sc_maxiosize
= ci
->ci_dev
->si_iosize_max
;
437 * Get partition information for the component.
439 error
= VOP_IOCTL(vp
, DIOCGPART
, (caddr_t
)&dpart
, FREAD
, cred
);
442 if (ccddebug
& (CCDB_FOLLOW
|CCDB_INIT
))
443 kprintf("ccd%d: %s: ioctl failed, error = %d\n",
444 ccd
->ccd_unit
, ci
->ci_path
, error
);
448 if (dpart
.fstype
!= FS_CCD
&&
449 !kuuid_is_ccd(&dpart
.fstype_uuid
)) {
450 kprintf("ccd%d: %s: filesystem type must be 'ccd'\n",
451 ccd
->ccd_unit
, ci
->ci_path
);
455 if (maxsecsize
< dpart
.media_blksize
)
456 maxsecsize
= dpart
.media_blksize
;
459 * Skip a certain amount of storage at the beginning of
460 * the component to make sure we don't infringe on any
461 * reserved sectors. This is handled entirely by
462 * dpart.reserved_blocks but we also impose a minimum
463 * of 16 sectors for backwards compatibility.
466 if (skip
< dpart
.reserved_blocks
)
467 skip
= dpart
.reserved_blocks
;
468 size
= dpart
.media_blocks
- skip
;
471 * Calculate the size, truncating to an interleave
472 * boundary if necessary.
474 if (cs
->sc_ileave
> 1)
475 size
-= size
% cs
->sc_ileave
;
477 if ((int64_t)size
<= 0) {
479 if (ccddebug
& (CCDB_FOLLOW
|CCDB_INIT
))
480 kprintf("ccd%d: %s: size == 0\n",
481 ccd
->ccd_unit
, ci
->ci_path
);
488 * Calculate the smallest uniform component, used
491 if (minsize
== 0 || minsize
> size
)
497 kprintf("ccd%d: max component iosize is %d\n",
498 cs
->sc_unit
, cs
->sc_maxiosize
);
501 * Don't allow the interleave to be smaller than
502 * the biggest component sector.
504 if ((cs
->sc_ileave
> 0) &&
505 (cs
->sc_ileave
% (maxsecsize
/ DEV_BSIZE
))) {
507 if (ccddebug
& (CCDB_FOLLOW
|CCDB_INIT
))
508 kprintf("ccd%d: interleave must be at least %d\n",
509 ccd
->ccd_unit
, (maxsecsize
/ DEV_BSIZE
));
516 * If uniform interleave is desired set all sizes to that of
517 * the smallest component. This will guarentee that a single
518 * interleave table is generated.
520 * Lost space must be taken into account when calculating the
521 * overall size. Half the space is lost when CCDF_MIRROR is
522 * specified. One disk is lost when CCDF_PARITY is specified.
524 if (ccd
->ccd_flags
& CCDF_UNIFORM
) {
525 for (ci
= cs
->sc_cinfo
;
526 ci
< &cs
->sc_cinfo
[cs
->sc_nccdisks
]; ci
++) {
527 ci
->ci_size
= minsize
;
529 if (ccd
->ccd_flags
& CCDF_MIRROR
) {
531 * Check to see if an even number of components
532 * have been specified. The interleave must also
533 * be non-zero in order for us to be able to
534 * guarentee the topology.
536 if (cs
->sc_nccdisks
% 2) {
537 kprintf("ccd%d: mirroring requires an even number of disks\n", ccd
->ccd_unit
);
541 if (cs
->sc_ileave
== 0) {
542 kprintf("ccd%d: an interleave must be specified when mirroring\n", ccd
->ccd_unit
);
546 cs
->sc_size
= (cs
->sc_nccdisks
/2) * minsize
;
547 } else if (ccd
->ccd_flags
& CCDF_PARITY
) {
548 cs
->sc_size
= (cs
->sc_nccdisks
-1) * minsize
;
550 if (cs
->sc_ileave
== 0) {
551 kprintf("ccd%d: an interleave must be specified when using parity\n", ccd
->ccd_unit
);
555 cs
->sc_size
= cs
->sc_nccdisks
* minsize
;
560 * Construct the interleave table.
562 ccdinterleave(cs
, ccd
->ccd_unit
);
565 * Create pseudo-geometry based on 1MB cylinders. It's
568 ccg
->ccg_secsize
= maxsecsize
;
569 ccg
->ccg_ntracks
= 1;
570 ccg
->ccg_nsectors
= 1024 * 1024 / ccg
->ccg_secsize
;
571 ccg
->ccg_ncylinders
= cs
->sc_size
/ ccg
->ccg_nsectors
;
574 * Add an devstat entry for this device.
576 devstat_add_entry(&cs
->device_stats
, "ccd", ccd
->ccd_unit
,
577 ccg
->ccg_secsize
, DEVSTAT_ALL_SUPPORTED
,
578 DEVSTAT_TYPE_STORARRAY
|DEVSTAT_TYPE_IF_OTHER
,
579 DEVSTAT_PRIORITY_ARRAY
);
581 cs
->sc_flags
|= CCDF_INITED
;
582 cs
->sc_cflags
= ccd
->ccd_flags
; /* So we can find out later... */
583 cs
->sc_unit
= ccd
->ccd_unit
;
586 while (ci
> cs
->sc_cinfo
) {
588 kfree(ci
->ci_path
, M_DEVBUF
);
590 kfree(cs
->sc_cinfo
, M_DEVBUF
);
596 ccdinterleave(struct ccd_softc
*cs
, int unit
)
598 struct ccdcinfo
*ci
, *smallci
;
607 if (ccddebug
& CCDB_INIT
)
608 kprintf("ccdinterleave(%x): ileave %d\n", cs
, cs
->sc_ileave
);
612 * Allocate an interleave table. The worst case occurs when each
613 * of N disks is of a different size, resulting in N interleave
616 * Chances are this is too big, but we don't care.
618 icount
= cs
->sc_nccdisks
+ 1;
619 cs
->sc_itable
= kmalloc(icount
* sizeof(struct ccdiinfo
),
620 M_DEVBUF
, M_WAITOK
|M_ZERO
);
623 * Trivial case: no interleave (actually interleave of disk size).
624 * Each table entry represents a single component in its entirety.
626 * An interleave of 0 may not be used with a mirror or parity setup.
628 if (cs
->sc_ileave
== 0) {
632 for (ix
= 0; ix
< cs
->sc_nccdisks
; ix
++) {
633 /* Allocate space for ii_index. */
634 ii
->ii_index
= kmalloc(sizeof(int), M_DEVBUF
, M_WAITOK
);
636 ii
->ii_startblk
= bn
;
638 ii
->ii_index
[0] = ix
;
639 bn
+= cs
->sc_cinfo
[ix
].ci_size
;
644 if (ccddebug
& CCDB_INIT
)
645 printiinfo(cs
->sc_itable
);
651 * The following isn't fast or pretty; it doesn't have to be.
655 for (ii
= cs
->sc_itable
; ii
< &cs
->sc_itable
[icount
]; ++ii
) {
657 * Allocate space for ii_index. We might allocate more then
660 ii
->ii_index
= kmalloc((sizeof(int) * cs
->sc_nccdisks
),
664 * Locate the smallest of the remaining components
668 while (ci
< &cs
->sc_cinfo
[cs
->sc_nccdisks
]) {
669 if (ci
->ci_size
> size
&&
671 ci
->ci_size
< smallci
->ci_size
)) {
678 * Nobody left, all done
680 if (smallci
== NULL
) {
686 * Record starting logical block using an sc_ileave blocksize.
688 ii
->ii_startblk
= bn
/ cs
->sc_ileave
;
691 * Record starting component block using an sc_ileave
692 * blocksize. This value is relative to the beginning of
695 ii
->ii_startoff
= lbn
;
698 * Determine how many disks take part in this interleave
699 * and record their indices.
702 for (ci
= cs
->sc_cinfo
;
703 ci
< &cs
->sc_cinfo
[cs
->sc_nccdisks
]; ci
++) {
704 if (ci
->ci_size
>= smallci
->ci_size
) {
705 ii
->ii_index
[ix
++] = ci
- cs
->sc_cinfo
;
713 bn
+= ix
* (smallci
->ci_size
- size
);
714 lbn
= smallci
->ci_size
/ cs
->sc_ileave
;
715 size
= smallci
->ci_size
;
717 if (ii
== &cs
->sc_itable
[icount
])
718 panic("ccdinterlave software bug! table exhausted");
720 if (ccddebug
& CCDB_INIT
)
721 printiinfo(cs
->sc_itable
);
727 ccdopen(struct dev_open_args
*ap
)
729 cdev_t dev
= ap
->a_head
.a_dev
;
730 int unit
= ccdunit(dev
);
731 struct ccd_softc
*cs
;
735 if (ccddebug
& CCDB_FOLLOW
)
736 kprintf("ccdopen(%x, %x)\n", dev
, flags
);
740 cs
= &ccd_softc
[unit
];
742 if ((error
= ccdlock(cs
)) == 0) {
750 ccdclose(struct dev_close_args
*ap
)
752 cdev_t dev
= ap
->a_head
.a_dev
;
753 int unit
= ccdunit(dev
);
754 struct ccd_softc
*cs
;
758 if (ccddebug
& CCDB_FOLLOW
)
759 kprintf("ccdclose(%x, %x)\n", dev
, flags
);
764 cs
= &ccd_softc
[unit
];
765 if ((error
= ccdlock(cs
)) == 0) {
772 ccdstrategy(struct dev_strategy_args
*ap
)
774 cdev_t dev
= ap
->a_head
.a_dev
;
775 struct bio
*bio
= ap
->a_bio
;
776 int unit
= ccdunit(dev
);
778 struct buf
*bp
= bio
->bio_buf
;
779 struct ccd_softc
*cs
= &ccd_softc
[unit
];
780 u_int64_t pbn
; /* in sc_secsize chunks */
781 u_int32_t sz
; /* in sc_secsize chunks */
784 if (ccddebug
& CCDB_FOLLOW
)
785 kprintf("ccdstrategy(%x): unit %d\n", bp
, unit
);
787 if ((cs
->sc_flags
& CCDF_INITED
) == 0) {
792 /* If it's a nil transfer, wake up the top half now. */
793 if (bp
->b_bcount
== 0) {
799 * Do bounds checking and adjust transfer. If there's an
800 * error, the bounds check will flag that for us.
803 pbn
= bio
->bio_offset
/ cs
->sc_geom
.ccg_secsize
;
804 sz
= howmany(bp
->b_bcount
, cs
->sc_geom
.ccg_secsize
);
807 * If out of bounds return an error. If the request goes
808 * past EOF, clip the request as appropriate. If exactly
809 * at EOF, return success (don't clip), but with 0 bytes
812 * Mark EOF B_INVAL (just like bad), indicating that the
813 * contents of the buffer, if any, is invalid.
815 if ((int64_t)pbn
< 0)
817 if (pbn
+ sz
> cs
->sc_size
) {
818 if (pbn
> cs
->sc_size
|| (bp
->b_flags
& B_BNOCLIP
))
820 if (pbn
== cs
->sc_size
) {
821 bp
->b_resid
= bp
->b_bcount
;
822 bp
->b_flags
|= B_INVAL
;
825 sz
= (long)(cs
->sc_size
- pbn
);
826 bp
->b_bcount
= sz
* cs
->sc_geom
.ccg_secsize
;
830 bp
->b_resid
= bp
->b_bcount
;
831 nbio
->bio_driver_info
= dev
;
842 * note: bio, not nbio, is valid at the done label.
845 bp
->b_error
= EINVAL
;
847 bp
->b_resid
= bp
->b_bcount
;
848 bp
->b_flags
|= B_ERROR
| B_INVAL
;
855 ccdstart(struct ccd_softc
*cs
, struct bio
*bio
)
858 struct ccdbuf
*cbp
[4];
859 struct buf
*bp
= bio
->bio_buf
;
860 /* XXX! : 2 reads and 2 writes for RAID 4/5 */
865 if (ccddebug
& CCDB_FOLLOW
)
866 kprintf("ccdstart(%x, %x)\n", cs
, bp
);
869 /* Record the transaction start */
870 devstat_start_transaction(&cs
->device_stats
);
873 * Allocate component buffers and fire off the requests
875 doffset
= bio
->bio_offset
;
878 for (bcount
= bp
->b_bcount
; bcount
> 0; bcount
-= rcount
) {
879 ccdbuffer(cbp
, cs
, bio
, doffset
, addr
, bcount
);
880 rcount
= cbp
[0]->cb_buf
.b_bcount
;
882 if (cs
->sc_cflags
& CCDF_MIRROR
) {
884 * Mirroring. Writes go to both disks, reads are
885 * taken from whichever disk seems most appropriate.
887 * We attempt to localize reads to the disk whos arm
888 * is nearest the read request. We ignore seeks due
889 * to writes when making this determination and we
890 * also try to avoid hogging.
892 if (cbp
[0]->cb_buf
.b_cmd
!= BUF_CMD_READ
) {
893 vn_strategy(cbp
[0]->cb_vp
,
894 &cbp
[0]->cb_buf
.b_bio1
);
895 vn_strategy(cbp
[1]->cb_vp
,
896 &cbp
[1]->cb_buf
.b_bio1
);
898 int pick
= cs
->sc_pick
;
899 daddr_t range
= cs
->sc_size
/ 16 * cs
->sc_geom
.ccg_secsize
;
900 if (doffset
< cs
->sc_blk
[pick
] - range
||
901 doffset
> cs
->sc_blk
[pick
] + range
903 cs
->sc_pick
= pick
= 1 - pick
;
905 cs
->sc_blk
[pick
] = doffset
+ rcount
;
906 vn_strategy(cbp
[pick
]->cb_vp
,
907 &cbp
[pick
]->cb_buf
.b_bio1
);
913 vn_strategy(cbp
[0]->cb_vp
,
914 &cbp
[0]->cb_buf
.b_bio1
);
922 * Build a component buffer header.
925 ccdbuffer(struct ccdbuf
**cb
, struct ccd_softc
*cs
, struct bio
*bio
,
926 off_t doffset
, caddr_t addr
, long bcount
)
928 struct ccdcinfo
*ci
, *ci2
= NULL
; /* XXX */
936 if (ccddebug
& CCDB_IO
)
937 kprintf("ccdbuffer(%x, %x, %d, %x, %d)\n",
938 cs
, bp
, bn
, addr
, bcount
);
941 * Determine which component bn falls in.
943 bn
= doffset
/ cs
->sc_geom
.ccg_secsize
;
947 if (cs
->sc_ileave
== 0) {
949 * Serially concatenated and neither a mirror nor a parity
950 * config. This is a special case.
955 for (ci
= cs
->sc_cinfo
; cbn
>= sblk
+ ci
->ci_size
; ci
++)
963 * Calculate cbn, the logical superblock (sc_ileave chunks),
964 * and cboff, a normal block offset (DEV_BSIZE chunks) relative
967 cboff
= cbn
% cs
->sc_ileave
; /* DEV_BSIZE gran */
968 cbn
= cbn
/ cs
->sc_ileave
; /* DEV_BSIZE * ileave gran */
971 * Figure out which interleave table to use.
973 for (ii
= cs
->sc_itable
; ii
->ii_ndisk
; ii
++) {
974 if (ii
->ii_startblk
> cbn
)
980 * off is the logical superblock relative to the beginning
981 * of this interleave block.
983 off
= cbn
- ii
->ii_startblk
;
986 * We must calculate which disk component to use (ccdisk),
987 * and recalculate cbn to be the superblock relative to
988 * the beginning of the component. This is typically done by
989 * adding 'off' and ii->ii_startoff together. However, 'off'
990 * must typically be divided by the number of components in
991 * this interleave array to be properly convert it from a
992 * CCD-relative logical superblock number to a
993 * component-relative superblock number.
995 if (ii
->ii_ndisk
== 1) {
997 * When we have just one disk, it can't be a mirror
998 * or a parity config.
1000 ccdisk
= ii
->ii_index
[0];
1001 cbn
= ii
->ii_startoff
+ off
;
1003 if (cs
->sc_cflags
& CCDF_MIRROR
) {
1005 * We have forced a uniform mapping, resulting
1006 * in a single interleave array. We double
1007 * up on the first half of the available
1008 * components and our mirror is in the second
1009 * half. This only works with a single
1010 * interleave array because doubling up
1011 * doubles the number of sectors, so there
1012 * cannot be another interleave array because
1013 * the next interleave array's calculations
1016 int ndisk2
= ii
->ii_ndisk
/ 2;
1017 ccdisk
= ii
->ii_index
[off
% ndisk2
];
1018 cbn
= ii
->ii_startoff
+ off
/ ndisk2
;
1019 ci2
= &cs
->sc_cinfo
[ccdisk
+ ndisk2
];
1020 } else if (cs
->sc_cflags
& CCDF_PARITY
) {
1022 * XXX not implemented yet
1024 int ndisk2
= ii
->ii_ndisk
- 1;
1025 ccdisk
= ii
->ii_index
[off
% ndisk2
];
1026 cbn
= ii
->ii_startoff
+ off
/ ndisk2
;
1027 if (cbn
% ii
->ii_ndisk
<= ccdisk
)
1030 ccdisk
= ii
->ii_index
[off
% ii
->ii_ndisk
];
1031 cbn
= ii
->ii_startoff
+ off
/ ii
->ii_ndisk
;
1035 ci
= &cs
->sc_cinfo
[ccdisk
];
1038 * Convert cbn from a superblock to a normal block so it
1039 * can be used to calculate (along with cboff) the normal
1040 * block index into this particular disk.
1042 cbn
*= cs
->sc_ileave
;
1046 * Fill in the component buf structure.
1048 * NOTE: devices do not use b_bufsize, only b_bcount, but b_bcount
1049 * will be truncated on device EOF so we use b_bufsize to detect
1053 cbp
->cb_buf
.b_cmd
= bio
->bio_buf
->b_cmd
;
1054 cbp
->cb_buf
.b_flags
|= bio
->bio_buf
->b_flags
;
1055 cbp
->cb_buf
.b_data
= addr
;
1056 cbp
->cb_vp
= ci
->ci_vp
;
1057 if (cs
->sc_ileave
== 0)
1058 cbc
= dbtob((off_t
)(ci
->ci_size
- cbn
));
1060 cbc
= dbtob((off_t
)(cs
->sc_ileave
- cboff
));
1061 if (cbc
> cs
->sc_maxiosize
)
1062 cbc
= cs
->sc_maxiosize
;
1063 cbp
->cb_buf
.b_bcount
= (cbc
< bcount
) ? cbc
: bcount
;
1064 cbp
->cb_buf
.b_bufsize
= cbp
->cb_buf
.b_bcount
;
1066 cbp
->cb_buf
.b_bio1
.bio_done
= ccdiodone
;
1067 cbp
->cb_buf
.b_bio1
.bio_caller_info1
.ptr
= cbp
;
1068 cbp
->cb_buf
.b_bio1
.bio_offset
= dbtob(cbn
+ cboff
+ ci
->ci_skip
);
1071 * context for ccdiodone
1074 cbp
->cb_unit
= cs
- ccd_softc
;
1075 cbp
->cb_comp
= ci
- cs
->sc_cinfo
;
1078 if (ccddebug
& CCDB_IO
)
1079 kprintf(" dev %x(u%d): cbp %x off %lld addr %x bcnt %d\n",
1080 ci
->ci_dev
, ci
-cs
->sc_cinfo
, cbp
,
1081 cbp
->cb_buf
.b_bio1
.bio_offset
,
1082 cbp
->cb_buf
.b_data
, cbp
->cb_buf
.b_bcount
);
1087 * Note: both I/O's setup when reading from mirror, but only one
1090 if (cs
->sc_cflags
& CCDF_MIRROR
) {
1091 /* mirror, setup second I/O */
1094 cbp
->cb_buf
.b_cmd
= bio
->bio_buf
->b_cmd
;
1095 cbp
->cb_buf
.b_flags
|= bio
->bio_buf
->b_flags
;
1096 cbp
->cb_buf
.b_data
= addr
;
1097 cbp
->cb_vp
= ci2
->ci_vp
;
1098 if (cs
->sc_ileave
== 0)
1099 cbc
= dbtob((off_t
)(ci
->ci_size
- cbn
));
1101 cbc
= dbtob((off_t
)(cs
->sc_ileave
- cboff
));
1102 if (cbc
> cs
->sc_maxiosize
)
1103 cbc
= cs
->sc_maxiosize
;
1104 cbp
->cb_buf
.b_bcount
= (cbc
< bcount
) ? cbc
: bcount
;
1105 cbp
->cb_buf
.b_bufsize
= cbp
->cb_buf
.b_bcount
;
1107 cbp
->cb_buf
.b_bio1
.bio_done
= ccdiodone
;
1108 cbp
->cb_buf
.b_bio1
.bio_caller_info1
.ptr
= cbp
;
1109 cbp
->cb_buf
.b_bio1
.bio_offset
= dbtob(cbn
+ cboff
+ ci2
->ci_skip
);
1112 * context for ccdiodone
1115 cbp
->cb_unit
= cs
- ccd_softc
;
1116 cbp
->cb_comp
= ci2
- cs
->sc_cinfo
;
1118 /* link together the ccdbuf's and clear "mirror done" flag */
1119 cb
[0]->cb_mirror
= cb
[1];
1120 cb
[1]->cb_mirror
= cb
[0];
1121 cb
[0]->cb_pflags
&= ~CCDPF_MIRROR_DONE
;
1122 cb
[1]->cb_pflags
&= ~CCDPF_MIRROR_DONE
;
1127 ccdintr(struct ccd_softc
*cs
, struct bio
*bio
)
1129 struct buf
*bp
= bio
->bio_buf
;
1132 if (ccddebug
& CCDB_FOLLOW
)
1133 kprintf("ccdintr(%x, %x)\n", cs
, bp
);
1136 * Request is done for better or worse, wakeup the top half.
1138 if (bp
->b_flags
& B_ERROR
)
1139 bp
->b_resid
= bp
->b_bcount
;
1140 devstat_end_transaction_buf(&cs
->device_stats
, bp
);
1145 * Called at interrupt time.
1146 * Mark the component as done and if all components are done,
1147 * take a ccd interrupt.
1150 ccdiodone(struct bio
*bio
)
1152 struct ccdbuf
*cbp
= bio
->bio_caller_info1
.ptr
;
1153 struct bio
*obio
= cbp
->cb_obio
;
1154 struct buf
*obp
= obio
->bio_buf
;
1155 int unit
= cbp
->cb_unit
;
1159 * Since we do not have exclusive access to underlying devices,
1160 * we can't keep cache translations around.
1162 clearbiocache(bio
->bio_next
);
1166 if (ccddebug
& CCDB_FOLLOW
)
1167 kprintf("ccdiodone(%x)\n", cbp
);
1168 if (ccddebug
& CCDB_IO
) {
1169 kprintf("ccdiodone: bp %x bcount %d resid %d\n",
1170 obp
, obp
->b_bcount
, obp
->b_resid
);
1171 kprintf(" dev %x(u%d), cbp %x off %lld addr %x bcnt %d\n",
1172 cbp
->cb_buf
.b_dev
, cbp
->cb_comp
, cbp
,
1173 cbp
->cb_buf
.b_loffset
, cbp
->cb_buf
.b_data
,
1174 cbp
->cb_buf
.b_bcount
);
1179 * If an error occured, report it. If this is a mirrored
1180 * configuration and the first of two possible reads, do not
1181 * set the error in the bp yet because the second read may
1184 if (cbp
->cb_buf
.b_flags
& B_ERROR
) {
1185 const char *msg
= "";
1187 if ((ccd_softc
[unit
].sc_cflags
& CCDF_MIRROR
) &&
1188 (cbp
->cb_buf
.b_cmd
== BUF_CMD_READ
) &&
1189 (cbp
->cb_pflags
& CCDPF_MIRROR_DONE
) == 0) {
1191 * We will try our read on the other disk down
1192 * below, also reverse the default pick so if we
1193 * are doing a scan we do not keep hitting the
1196 struct ccd_softc
*cs
= &ccd_softc
[unit
];
1198 msg
= ", trying other disk";
1199 cs
->sc_pick
= 1 - cs
->sc_pick
;
1200 cs
->sc_blk
[cs
->sc_pick
] = obio
->bio_offset
;
1202 obp
->b_flags
|= B_ERROR
;
1203 obp
->b_error
= cbp
->cb_buf
.b_error
?
1204 cbp
->cb_buf
.b_error
: EIO
;
1206 kprintf("ccd%d: error %d on component %d offset %lld (ccd offset %lld)%s\n",
1207 unit
, obp
->b_error
, cbp
->cb_comp
,
1208 cbp
->cb_buf
.b_bio2
.bio_offset
,
1209 obio
->bio_offset
, msg
);
1213 * Process mirror. If we are writing, I/O has been initiated on both
1214 * buffers and we fall through only after both are finished.
1216 * If we are reading only one I/O is initiated at a time. If an
1217 * error occurs we initiate the second I/O and return, otherwise
1218 * we free the second I/O without initiating it.
1221 if (ccd_softc
[unit
].sc_cflags
& CCDF_MIRROR
) {
1222 if (cbp
->cb_buf
.b_cmd
!= BUF_CMD_READ
) {
1224 * When writing, handshake with the second buffer
1225 * to determine when both are done. If both are not
1226 * done, return here.
1228 if ((cbp
->cb_pflags
& CCDPF_MIRROR_DONE
) == 0) {
1229 cbp
->cb_mirror
->cb_pflags
|= CCDPF_MIRROR_DONE
;
1236 * When reading, either dispose of the second buffer
1237 * or initiate I/O on the second buffer if an error
1238 * occured with this one.
1240 if ((cbp
->cb_pflags
& CCDPF_MIRROR_DONE
) == 0) {
1241 if (cbp
->cb_buf
.b_flags
& B_ERROR
) {
1242 cbp
->cb_mirror
->cb_pflags
|=
1245 cbp
->cb_mirror
->cb_vp
,
1246 &cbp
->cb_mirror
->cb_buf
.b_bio1
1252 putccdbuf(cbp
->cb_mirror
);
1260 * Use our saved b_bufsize to determine if an unexpected EOF occured.
1262 count
= cbp
->cb_buf
.b_bufsize
;
1266 * If all done, "interrupt".
1268 obp
->b_resid
-= count
;
1269 if (obp
->b_resid
< 0)
1270 panic("ccdiodone: count");
1271 if (obp
->b_resid
== 0)
1272 ccdintr(&ccd_softc
[unit
], obio
);
1277 ccdioctl(struct dev_ioctl_args
*ap
)
1279 cdev_t dev
= ap
->a_head
.a_dev
;
1280 int unit
= ccdunit(dev
);
1281 int i
, j
, lookedup
= 0, error
= 0;
1282 struct ccd_softc
*cs
;
1283 struct ccd_ioctl
*ccio
= (struct ccd_ioctl
*)ap
->a_data
;
1284 struct ccddevice ccd
;
1285 struct disk_info info
;
1291 cs
= &ccd_softc
[unit
];
1293 bzero(&ccd
, sizeof(ccd
));
1295 switch (ap
->a_cmd
) {
1297 if (cs
->sc_flags
& CCDF_INITED
)
1300 if ((ap
->a_fflag
& FWRITE
) == 0)
1303 if ((error
= ccdlock(cs
)) != 0)
1306 if (ccio
->ccio_ndisks
> CCD_MAXNDISKS
) {
1311 /* Fill in some important bits. */
1312 ccd
.ccd_unit
= unit
;
1313 ccd
.ccd_interleave
= ccio
->ccio_ileave
;
1314 if (ccd
.ccd_interleave
== 0 &&
1315 ((ccio
->ccio_flags
& CCDF_MIRROR
) ||
1316 (ccio
->ccio_flags
& CCDF_PARITY
))) {
1317 kprintf("ccd%d: disabling mirror/parity, interleave is 0\n", unit
);
1318 ccio
->ccio_flags
&= ~(CCDF_MIRROR
| CCDF_PARITY
);
1320 if ((ccio
->ccio_flags
& CCDF_MIRROR
) &&
1321 (ccio
->ccio_flags
& CCDF_PARITY
)) {
1322 kprintf("ccd%d: can't specify both mirror and parity, using mirror\n", unit
);
1323 ccio
->ccio_flags
&= ~CCDF_PARITY
;
1325 if ((ccio
->ccio_flags
& (CCDF_MIRROR
| CCDF_PARITY
)) &&
1326 !(ccio
->ccio_flags
& CCDF_UNIFORM
)) {
1327 kprintf("ccd%d: mirror/parity forces uniform flag\n",
1329 ccio
->ccio_flags
|= CCDF_UNIFORM
;
1331 ccd
.ccd_flags
= ccio
->ccio_flags
& CCDF_USERMASK
;
1334 * Allocate space for and copy in the array of
1335 * componet pathnames and device numbers.
1337 cpp
= kmalloc(ccio
->ccio_ndisks
* sizeof(char *),
1338 M_DEVBUF
, M_WAITOK
);
1339 vpp
= kmalloc(ccio
->ccio_ndisks
* sizeof(struct vnode
*),
1340 M_DEVBUF
, M_WAITOK
);
1342 error
= copyin((caddr_t
)ccio
->ccio_disks
, (caddr_t
)cpp
,
1343 ccio
->ccio_ndisks
* sizeof(char **));
1345 kfree(vpp
, M_DEVBUF
);
1346 kfree(cpp
, M_DEVBUF
);
1352 if (ccddebug
& CCDB_INIT
) {
1353 for (i
= 0; i
< ccio
->ccio_ndisks
; ++i
)
1354 kprintf("ccdioctl: component %d: 0x%x\n",
1359 for (i
= 0; i
< ccio
->ccio_ndisks
; ++i
) {
1361 if (ccddebug
& CCDB_INIT
)
1362 kprintf("ccdioctl: lookedup = %d\n", lookedup
);
1364 if ((error
= ccdlookup(cpp
[i
], &vpp
[i
])) != 0) {
1365 for (j
= 0; j
< lookedup
; ++j
)
1366 (void)vn_close(vpp
[j
], FREAD
|FWRITE
);
1367 kfree(vpp
, M_DEVBUF
);
1368 kfree(cpp
, M_DEVBUF
);
1376 ccd
.ccd_ndev
= ccio
->ccio_ndisks
;
1379 * Initialize the ccd. Fills in the softc for us.
1381 if ((error
= ccdinit(&ccd
, cpp
, ap
->a_cred
)) != 0) {
1382 for (j
= 0; j
< lookedup
; ++j
)
1383 (void)vn_close(vpp
[j
], FREAD
|FWRITE
);
1384 kfree(vpp
, M_DEVBUF
);
1385 kfree(cpp
, M_DEVBUF
);
1391 * The ccd has been successfully initialized, so
1392 * we can place it into the array and read the disklabel.
1394 bcopy(&ccd
, &ccddevs
[unit
], sizeof(ccd
));
1395 ccio
->ccio_unit
= unit
;
1396 ccio
->ccio_size
= cs
->sc_size
;
1398 bzero(&info
, sizeof(info
));
1399 info
.d_media_blksize
= cs
->sc_geom
.ccg_secsize
;
1400 info
.d_media_blocks
= cs
->sc_size
;
1401 info
.d_nheads
= cs
->sc_geom
.ccg_ntracks
;
1402 info
.d_secpertrack
= cs
->sc_geom
.ccg_nsectors
;
1403 info
.d_ncylinders
= cs
->sc_geom
.ccg_ncylinders
;
1404 info
.d_secpercyl
= info
.d_nheads
* info
.d_secpertrack
;
1407 * For cases where a label is directly applied to the ccd,
1408 * without slices, DSO_COMPATMBR forces one sector be
1409 * reserved for backwards compatibility.
1411 info
.d_dsflags
= DSO_COMPATMBR
;
1412 disk_setdiskinfo(&cs
->sc_disk
, &info
);
1419 if ((cs
->sc_flags
& CCDF_INITED
) == 0)
1422 if ((ap
->a_fflag
& FWRITE
) == 0)
1425 if ((error
= ccdlock(cs
)) != 0)
1428 if (dev_drefs(cs
->sc_dev
) > 1) {
1434 * Free ccd_softc information and clear entry.
1437 /* Close the components and free their pathnames. */
1438 for (i
= 0; i
< cs
->sc_nccdisks
; ++i
) {
1440 * XXX: this close could potentially fail and
1441 * cause Bad Things. Maybe we need to force
1442 * the close to happen?
1445 if (ccddebug
& CCDB_VNODE
)
1446 vprint("CCDIOCCLR: vnode info",
1447 cs
->sc_cinfo
[i
].ci_vp
);
1449 (void)vn_close(cs
->sc_cinfo
[i
].ci_vp
, FREAD
|FWRITE
);
1450 kfree(cs
->sc_cinfo
[i
].ci_path
, M_DEVBUF
);
1453 /* Free interleave index. */
1454 for (i
= 0; cs
->sc_itable
[i
].ii_ndisk
; ++i
)
1455 kfree(cs
->sc_itable
[i
].ii_index
, M_DEVBUF
);
1457 /* Free component info and interleave table. */
1458 kfree(cs
->sc_cinfo
, M_DEVBUF
);
1459 kfree(cs
->sc_itable
, M_DEVBUF
);
1460 cs
->sc_cinfo
= NULL
;
1461 cs
->sc_itable
= NULL
;
1462 cs
->sc_flags
&= ~CCDF_INITED
;
1465 * Free ccddevice information and clear entry.
1467 kfree(ccddevs
[unit
].ccd_cpp
, M_DEVBUF
);
1468 kfree(ccddevs
[unit
].ccd_vpp
, M_DEVBUF
);
1469 bcopy(&ccd
, &ccddevs
[unit
], sizeof(ccd
));
1472 * And remove the devstat entry.
1474 devstat_remove_entry(&cs
->device_stats
);
1476 /* This must be atomic. */
1491 ccddump(struct dev_dump_args
*ap
)
1493 /* Not implemented. */
1498 * Lookup the provided name in the filesystem. If the file exists,
1499 * is a valid block device, and isn't being used by anyone else,
1500 * set *vpp to the file's vnode.
1503 ccdlookup(char *path
, struct vnode
**vpp
)
1505 struct nlookupdata nd
;
1511 error
= nlookup_init(&nd
, path
, UIO_USERSPACE
, NLC_FOLLOW
|NLC_LOCKVP
);
1514 if ((error
= vn_open(&nd
, NULL
, FREAD
|FWRITE
, 0)) != 0) {
1516 if (ccddebug
& CCDB_FOLLOW
|CCDB_INIT
)
1517 kprintf("ccdlookup: vn_open error = %d\n", error
);
1523 if (vp
->v_opencount
> 1) {
1528 if (!vn_isdisk(vp
, &error
))
1532 if (ccddebug
& CCDB_VNODE
)
1533 vprint("ccdlookup: vnode info", vp
);
1537 nd
.nl_open_vp
= NULL
;
1539 *vpp
= vp
; /* leave ref intact */
1547 * Wait interruptibly for an exclusive lock.
1550 * Several drivers do this; it should be abstracted and made MP-safe.
1553 ccdlock(struct ccd_softc
*cs
)
1557 while ((cs
->sc_flags
& CCDF_LOCKED
) != 0) {
1558 cs
->sc_flags
|= CCDF_WANTED
;
1559 if ((error
= tsleep(cs
, PCATCH
, "ccdlck", 0)) != 0)
1562 cs
->sc_flags
|= CCDF_LOCKED
;
1567 * Unlock and wake up any waiters.
1570 ccdunlock(struct ccd_softc
*cs
)
1573 cs
->sc_flags
&= ~CCDF_LOCKED
;
1574 if ((cs
->sc_flags
& CCDF_WANTED
) != 0) {
1575 cs
->sc_flags
&= ~CCDF_WANTED
;
1582 printiinfo(struct ccdiinfo
*ii
)
1586 for (ix
= 0; ii
->ii_ndisk
; ix
++, ii
++) {
1587 kprintf(" itab[%d]: #dk %d sblk %d soff %d",
1588 ix
, ii
->ii_ndisk
, ii
->ii_startblk
, ii
->ii_startoff
);
1589 for (i
= 0; i
< ii
->ii_ndisk
; i
++)
1590 kprintf(" %d", ii
->ii_index
[i
]);
1597 /* Local Variables: */
1598 /* c-argdecl-indent: 8 */
1599 /* c-continued-statement-offset: 8 */
1600 /* c-indent-level: 8 */