Oops, add missing space.

[dragonfly/port-amd64.git] / contrib / libarchive-2 / libarchive / archive_read_support_compression_gzip.c

/*-
 * Copyright (c) 2003-2007 Tim Kientzle
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "archive_platform.h"

__FBSDID("$FreeBSD: src/lib/libarchive/archive_read_support_compression_gzip.c,v 1.14 2007/04/05 05:18:16 kientzle Exp $");


#ifdef HAVE_ERRNO_H
#include <errno.h>
#endif
#ifdef HAVE_STDLIB_H
#include <stdlib.h>
#endif
#ifdef HAVE_STRING_H
#include <string.h>
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#ifdef HAVE_ZLIB_H
#include <zlib.h>
#endif

#include "archive.h"
#include "archive_private.h"
#include "archive_read_private.h"

#ifdef HAVE_ZLIB_H
struct private_data {
        z_stream         stream;
        unsigned char   *uncompressed_buffer;
        size_t           uncompressed_buffer_size;
        unsigned char   *read_next;
        int64_t          total_out;
        unsigned long    crc;
        char             header_done;
        char             eof; /* True = found end of compressed data. */
};

static int      finish(struct archive_read *);
static ssize_t  read_ahead(struct archive_read *, const void **, size_t);
static ssize_t  read_consume(struct archive_read *, size_t);
static int      drive_decompressor(struct archive_read *a, struct private_data *);
#endif

/* These two functions are defined even if we lack the library.  See below. */
static int      bid(const void *, size_t);
static int      init(struct archive_read *, const void *, size_t);

int
archive_read_support_compression_gzip(struct archive *_a)
{
        struct archive_read *a = (struct archive_read *)_a;
        if (__archive_read_register_compression(a, bid, init) != NULL)
                return (ARCHIVE_OK);
        return (ARCHIVE_FATAL);
}

/*
 * Test whether we can handle this data.
 *
 * This logic returns zero if any part of the signature fails.  It
 * also tries to Do The Right Thing if a very short buffer prevents us
 * from verifying as much as we would like.
 */
static int
bid(const void *buff, size_t len)
{
        const unsigned char *buffer;
        int bits_checked;

        if (len < 1)
                return (0);

        buffer = (const unsigned char *)buff;
        bits_checked = 0;
        if (buffer[0] != 037)   /* Verify first ID byte. */
                return (0);
        bits_checked += 8;
        if (len < 2)
                return (bits_checked);

        if (buffer[1] != 0213)  /* Verify second ID byte. */
                return (0);
        bits_checked += 8;
        if (len < 3)
                return (bits_checked);

        if (buffer[2] != 8)     /* Compression must be 'deflate'. */
                return (0);
        bits_checked += 8;
        if (len < 4)
                return (bits_checked);

        if ((buffer[3] & 0xE0)!= 0)     /* No reserved flags set. */
                return (0);
        bits_checked += 3;
        if (len < 5)
                return (bits_checked);

        /*
         * TODO: Verify more; in particular, gzip has an optional
         * header CRC, which would give us 16 more verified bits.  We
         * may also be able to verify certain constraints on other
         * fields.
         */

        return (bits_checked);
}


#ifndef HAVE_ZLIB_H

/*
 * If we don't have the library on this system, we can't actually do the
 * decompression.  We can, however, still detect compressed archives
 * and emit a useful message.
 */
static int
init(struct archive_read *a, const void *buff, size_t n)
{
        (void)a;        /* UNUSED */
        (void)buff;     /* UNUSED */
        (void)n;        /* UNUSED */

        archive_set_error(a, -1,
            "This version of libarchive was compiled without gzip support");
        return (ARCHIVE_FATAL);
}


#else

/*
 * Setup the callbacks.
 */
static int
init(struct archive_read *a, const void *buff, size_t n)
{
        struct private_data *state;
        int ret;

        a->archive.compression_code = ARCHIVE_COMPRESSION_GZIP;
        a->archive.compression_name = "gzip";

        state = (struct private_data *)malloc(sizeof(*state));
        if (state == NULL) {
                archive_set_error(&a->archive, ENOMEM,
                    "Can't allocate data for %s decompression",
                    a->archive.compression_name);
                return (ARCHIVE_FATAL);
        }
        memset(state, 0, sizeof(*state));

        state->crc = crc32(0L, NULL, 0);
        state->header_done = 0; /* We've not yet begun to parse header... */

        state->uncompressed_buffer_size = 64 * 1024;
        state->uncompressed_buffer = (unsigned char *)malloc(state->uncompressed_buffer_size);
        state->stream.next_out = state->uncompressed_buffer;
        state->read_next = state->uncompressed_buffer;
        state->stream.avail_out = state->uncompressed_buffer_size;

        if (state->uncompressed_buffer == NULL) {
                archive_set_error(&a->archive, ENOMEM,
                    "Can't allocate %s decompression buffers",
                    a->archive.compression_name);
                free(state);
                return (ARCHIVE_FATAL);
        }

        /*
         * A bug in zlib.h: stream.next_in should be marked 'const'
         * but isn't (the library never alters data through the
         * next_in pointer, only reads it).  The result: this ugly
         * cast to remove 'const'.
         */
        state->stream.next_in = (Bytef *)(uintptr_t)(const void *)buff;
        state->stream.avail_in = n;

        a->decompressor->read_ahead = read_ahead;
        a->decompressor->consume = read_consume;
        a->decompressor->skip = NULL; /* not supported */
        a->decompressor->finish = finish;

        /*
         * TODO: Do I need to parse the gzip header before calling
         * inflateInit2()?  In particular, one of the header bytes
         * marks "best compression" or "fastest", which may be
         * appropriate for setting the second parameter here.
         * However, I think the only penalty for not setting it
         * correctly is wasted memory.  If this is necessary, it
         * should probably go into drive_decompressor() below.
         */

        /* Initialize compression library. */
        ret = inflateInit2(&(state->stream),
            -15 /* Don't check for zlib header */);
        if (ret == Z_OK) {
                a->decompressor->data = state;
                return (ARCHIVE_OK);
        }

        /* Library setup failed: Clean up. */
        archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
            "Internal error initializing %s library",
            a->archive.compression_name);
        free(state->uncompressed_buffer);
        free(state);

        /* Override the error message if we know what really went wrong. */
        switch (ret) {
        case Z_STREAM_ERROR:
                archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
                    "Internal error initializing compression library: "
                    "invalid setup parameter");
                break;
        case Z_MEM_ERROR:
                archive_set_error(&a->archive, ENOMEM,
                    "Internal error initializing compression library: "
                    "out of memory");
                break;
        case Z_VERSION_ERROR:
                archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
                    "Internal error initializing compression library: "
                    "invalid library version");
                break;
        }

        return (ARCHIVE_FATAL);
}

/*
 * Return a block of data from the decompression buffer.  Decompress more
 * as necessary.
 */
static ssize_t
read_ahead(struct archive_read *a, const void **p, size_t min)
{
        struct private_data *state;
        size_t read_avail, was_avail;
        int ret;

        state = (struct private_data *)a->decompressor->data;
        if (!a->client_reader) {
                archive_set_error(&a->archive, ARCHIVE_ERRNO_PROGRAMMER,
                    "No read callback is registered?  "
                    "This is probably an internal programming error.");
                return (ARCHIVE_FATAL);
        }

        read_avail = state->stream.next_out - state->read_next;

        if (read_avail + state->stream.avail_out < min) {
                memmove(state->uncompressed_buffer, state->read_next,
                    read_avail);
                state->read_next = state->uncompressed_buffer;
                state->stream.next_out = state->read_next + read_avail;
                state->stream.avail_out
                    = state->uncompressed_buffer_size - read_avail;
        }

        while (read_avail < min &&              /* Haven't satisfied min. */
            read_avail < state->uncompressed_buffer_size) { /* !full */
                was_avail = read_avail;
                if ((ret = drive_decompressor(a, state)) < ARCHIVE_OK)
                        return (ret);
                if (ret == ARCHIVE_EOF)
                        break; /* Break on EOF even if we haven't met min. */
                read_avail = state->stream.next_out - state->read_next;
                if (was_avail == read_avail) /* No progress? */
                        break;
        }

        *p = state->read_next;
        return (read_avail);
}

/*
 * Mark a previously-returned block of data as read.
 */
static ssize_t
read_consume(struct archive_read *a, size_t n)
{
        struct private_data *state;

        state = (struct private_data *)a->decompressor->data;
        a->archive.file_position += n;
        state->read_next += n;
        if (state->read_next > state->stream.next_out)
                __archive_errx(1, "Request to consume too many "
                    "bytes from gzip decompressor");
        return (n);
}

/*
 * Clean up the decompressor.
 */
static int
finish(struct archive_read *a)
{
        struct private_data *state;
        int ret;

        state = (struct private_data *)a->decompressor->data;
        ret = ARCHIVE_OK;
        switch (inflateEnd(&(state->stream))) {
        case Z_OK:
                break;
        default:
                archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
                    "Failed to clean up %s compressor",
                    a->archive.compression_name);
                ret = ARCHIVE_FATAL;
        }

        free(state->uncompressed_buffer);
        free(state);

        a->decompressor->data = NULL;
        return (ret);
}

/*
 * Utility function to pull data through decompressor, reading input
 * blocks as necessary.
 */
static int
drive_decompressor(struct archive_read *a, struct private_data *state)
{
        ssize_t ret;
        size_t decompressed, total_decompressed;
        int count, flags, header_state;
        unsigned char *output;
        unsigned char b;
        const void *read_buf;

        if (state->eof)
                return (ARCHIVE_EOF);
        flags = 0;
        count = 0;
        header_state = 0;
        total_decompressed = 0;
        for (;;) {
                if (state->stream.avail_in == 0) {
                        read_buf = state->stream.next_in;
                        ret = (a->client_reader)(&a->archive, a->client_data,
                            &read_buf);
                        state->stream.next_in = (unsigned char *)(uintptr_t)read_buf;
                        if (ret < 0) {
                                /*
                                 * TODO: Find a better way to handle
                                 * this read failure.
                                 */
                                goto fatal;
                        }
                        if (ret == 0  &&  total_decompressed == 0) {
                                archive_set_error(&a->archive, EIO,
                                    "Premature end of %s compressed data",
                                    a->archive.compression_name);
                                return (ARCHIVE_FATAL);
                        }
                        a->archive.raw_position += ret;
                        state->stream.avail_in = ret;
                }

                if (!state->header_done) {
                        /*
                         * If still parsing the header, interpret the
                         * next byte.
                         */
                        b = *(state->stream.next_in++);
                        state->stream.avail_in--;

                        /*
                         * Yes, this is somewhat crude, but it works,
                         * GZip format isn't likely to change anytime
                         * in the near future, and header parsing is
                         * certainly not a performance issue, so
                         * there's little point in making this more
                         * elegant.  Of course, if you see an easy way
                         * to make this more elegant, please let me
                         * know.. ;-)
                         */
                        switch (header_state) {
                        case 0: /* First byte of signature. */
                                if (b != 037)
                                        goto fatal;
                                header_state = 1;
                                break;
                        case 1: /* Second byte of signature. */
                                if (b != 0213)
                                        goto fatal;
                                header_state = 2;
                                break;
                        case 2: /* Compression type must be 8. */
                                if (b != 8)
                                        goto fatal;
                                header_state = 3;
                                break;
                        case 3: /* GZip flags. */
                                flags = b;
                                header_state = 4;
                                break;
                        case 4: case 5: case 6: case 7: /* Mod time. */
                                header_state++;
                                break;
                        case 8: /* Deflate flags. */
                                header_state = 9;
                                break;
                        case 9: /* OS. */
                                header_state = 10;
                                break;
                        case 10: /* Optional Extra: First byte of Length. */
                                if ((flags & 4)) {
                                        count = 255 & (int)b;
                                        header_state = 11;
                                        break;
                                }
                                /*
                                 * Fall through if there is no
                                 * Optional Extra field.
                                 */
                        case 11: /* Optional Extra: Second byte of Length. */
                                if ((flags & 4)) {
                                        count = (0xff00 & ((int)b << 8)) | count;
                                        header_state = 12;
                                        break;
                                }
                                /*
                                 * Fall through if there is no
                                 * Optional Extra field.
                                 */
                        case 12: /* Optional Extra Field: counted length. */
                                if ((flags & 4)) {
                                        --count;
                                        if (count == 0) header_state = 13;
                                        else header_state = 12;
                                        break;
                                }
                                /*
                                 * Fall through if there is no
                                 * Optional Extra field.
                                 */
                        case 13: /* Optional Original Filename. */
                                if ((flags & 8)) {
                                        if (b == 0) header_state = 14;
                                        else header_state = 13;
                                        break;
                                }
                                /*
                                 * Fall through if no Optional
                                 * Original Filename.
                                 */
                        case 14: /* Optional Comment. */
                                if ((flags & 16)) {
                                        if (b == 0) header_state = 15;
                                        else header_state = 14;
                                        break;
                                }
                                /* Fall through if no Optional Comment. */
                        case 15: /* Optional Header CRC: First byte. */
                                if ((flags & 2)) {
                                        header_state = 16;
                                        break;
                                }
                                /* Fall through if no Optional Header CRC. */
                        case 16: /* Optional Header CRC: Second byte. */
                                if ((flags & 2)) {
                                        header_state = 17;
                                        break;
                                }
                                /* Fall through if no Optional Header CRC. */
                        case 17: /* First byte of compressed data. */
                                state->header_done = 1; /* done with header */
                                state->stream.avail_in++;
                                state->stream.next_in--;
                        }

                        /*
                         * TODO: Consider moving the inflateInit2 call
                         * here so it can include the compression type
                         * from the header?
                         */
                } else {
                        output = state->stream.next_out;

                        /* Decompress some data. */
                        ret = inflate(&(state->stream), 0);
                        decompressed = state->stream.next_out - output;

                        /* Accumulate the CRC of the uncompressed data. */
                        state->crc = crc32(state->crc, output, decompressed);

                        /* Accumulate the total bytes of output. */
                        state->total_out += decompressed;
                        total_decompressed += decompressed;

                        switch (ret) {
                        case Z_OK: /* Decompressor made some progress. */
                                if (decompressed > 0)
                                        return (ARCHIVE_OK);
                                break;
                        case Z_STREAM_END: /* Found end of stream. */
                                /*
                                 * TODO: Verify gzip trailer
                                 * (uncompressed length and CRC).
                                 */
                                state->eof = 1;
                                return (ARCHIVE_OK);
                        default:
                                /* Any other return value is an error. */
                                goto fatal;
                        }
                }
        }
        return (ARCHIVE_OK);

        /* Return a fatal error. */
fatal:
        archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
            "%s decompression failed", a->archive.compression_name);
        return (ARCHIVE_FATAL);
}

#endif /* HAVE_ZLIB_H */