3 # Copyright (c) 1990 The Regents of the University of California.
6 # Written and contributed by W. Jolitz 12/90
8 # Redistribution and use in source and binary forms are permitted provided
9 # that: (1) source distributions retain this entire copyright notice and
10 # comment, and (2) distributions including binaries display the following
11 # acknowledgement: ``This product includes software developed by the
12 # University of California, Berkeley and its contributors'' in the
13 # documentation or other materials provided with the distribution and in
14 # all advertising materials mentioning features or use of this software.
15 # Neither the name of the University nor the names of its contributors may
16 # be used to endorse or promote products derived from this software without
17 # specific prior written permission.
18 # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
19 # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
20 # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
22 # @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
23 # $FreeBSD: src/etc/MAKEDEV,v 1.243.2.57 2003/02/10 11:35:53 simokawa Exp $
24 # $DragonFly: src/etc/MAKEDEV,v 1.41 2008/04/23 09:44:07 hasso Exp $
26 # Device "make" file. Valid arguments:
27 # all makes all known devices, standard number of units (or close)
28 # std standard devices
29 # jail suitable for a jail(8)
30 # local configuration specific devices
31 # mach-4 mach4&lites+devices for Mach's XFree86 distribution
32 # (see http://www.cs.hut.fi/lites.html for more info on LITES)
35 # ast* ATAPI tape drives
36 # wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
37 # sa* SCSI Sequential Access Devices
40 # aac* Adaptec FSA RAID controllers
41 # aacd* Adaptec FSA RAID
42 # acd* ATAPI CD-ROM disks
44 # afd* ATAPI floppy disks
47 # cd* SCSI CD-ROM disks
48 # da* SCSI Direct Access Devices
49 # fd* floppy disk drives (3 1/2", 5 1/4")
50 # idad* Compaq Smart-2 RAID arrays
51 # ips* IBM ServeRAID controller
53 # md* Memory (or malloc) disk
54 # mlx* Mylex DAC960 RAID controllers
55 # mlxd* Mylex DAC960 RAID disk volumes
56 # pst* Promise SuperTrak RAID disks
58 # vkd* virtual kernel disk
61 # vty* virtual console devices for syscons
64 # mse* Logitech and ATI Inport bus mouse
66 # jogdial Sony VAIO Jogdial
67 # sysmouse Mousesystems mouse emulator for syscons
70 # tty* general purpose serial ports
71 # cua* dialout serial ports
72 # ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
73 # cuaA* Specialix SI/XIO dialout ports
74 # ttyD* Digiboard - 16 dialin ports
75 # cuaD* Digiboard - 16 dialout ports
76 # ttyE* Stallion EasyIO (stl) dialin ports
77 # cuaE* Stallion EasyIO (stl) dialout ports
78 # ttyF* Stallion Brumby (stli) dialin ports
79 # cuaF* Stallion Brumby (stli) dialout ports
80 # ttyR* Rocketport dialin ports
81 # cuaR* Rocketport dialout ports
83 # stlN Stallion EasyIO board N dialin and dialout
84 # stliN Stallion Brumby board N dialin and dialout
87 # pty* set of 32 master and slave pseudo terminals
88 # vty* virtual terminals using syscons console
92 # ppi* Parallel port i/o
93 # pps* Pulse per second timing interface
94 # pcfclock* Parallel time sync interface
101 # usb* USB bus control device
102 # ucom* USB serial devices
103 # ugen* generic USB device
104 # uhid* Human Interface Device (HID)
108 # urio* Diamond Rio 500
109 # uscanner* USB scanners
111 # SCSI devices (other than CD-ROM, tape and disk):
112 # ch* SCSI Media-Changer (juke box) driver
113 # pt* Processor Type (HP scanner, as one example)
114 # pass* CAM Passthrough device
115 # ses* SES (SCSI Environmental Services) and
116 # SAF-TE (SCSI Accessible Fault-Tolerant Enclosures) device
118 # PC-CARD (previously called PCMCIA) support
119 # card* PC-CARD slots
122 # i4b isdnd call control device
123 # i4bctl debugging control device
124 # i4btrc* trace data interface(s), one per passive card
125 # i4btel* telephony interface(s)
126 # i4bteld* telephony dialout interface(s)
127 # i4brbch* raw b channel access device(s)
129 # Special purpose devices:
130 # acpi ACPI control device
131 # apm Advanced Power Management BIOS
132 # apmctl APM BIOS control device
134 # crypto crypto interface
136 # tw* xten power controller
137 # snd* various sound cards
138 # pcaudio PCM audio driver
139 # socksys iBCS2 socket system driver
140 # vat VAT compatibility audio driver (requires snd*)
141 # gsc Genius GS-4500 hand scanner
143 # tun* Tunneling IP device
144 # tap* Ethernet Tunneling device
145 # snp* tty snoop devices
146 # spigot Video Spigot video acquisition card
147 # ctx* Cortex-I video acquisition card
148 # meteor* Matrox Meteor video acquisition card (pci)
149 # bktr* Bt848 based video acquisition card (pci)
150 # labpc* National Instrument's Lab-PC and LAB-PC+
151 # perfmon CPU performance-monitoring counters
152 # pci PCI configuration-space access from user mode
153 # ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth)
154 # kbd keyboard devices
155 # elan-mmcr AMD Elan support (e.g. mmap MMCR)
156 # agpgart AGP interface
157 # nsmb* SMB/CIFS protocol interface
158 # pf PF packet filter
159 # cmx Omnikey CardMan 4040 smartcard reader
161 ##############################################################################
163 # To override the default ownership and/or permissions, you now have the
164 # /etc/devices.conf file (create it if it's not there). Entries in this file
167 # ad0s1c root:staff 666 # Override ad0s1c
168 # ad0* root:wheel 641 # Override the entire ad0 family
169 # sa0.ctl heinz:ketchup 444 # Override device control node
170 # sa*.ctl heinz:ketchup 666 # Override all sa* control nodes
171 # fd/4 ihate:floppies 000 # Override /dev/fd/4
173 # See the devices.conf(5) man page for further information.
175 # J.Anslik (joerg@anslik.de)
177 ##############################################################################
181 #-----------------------------------------------------------------------------
182 # Where all device special files are built.
183 #-----------------------------------------------------------------------------
188 #-----------------------------------------------------------------------------
189 # File containing local ownership and permissions override entries.
190 #-----------------------------------------------------------------------------
192 DEVPERMS_LOCAL
="/etc/devices.conf"
195 #-----------------------------------------------------------------------------
196 # Some useful programs.
197 #-----------------------------------------------------------------------------
206 #-----------------------------------------------------------------------------
207 # Set up a default search path.
208 #-----------------------------------------------------------------------------
210 if [ -n "$MAKEDEVPATH" ]
218 #-----------------------------------------------------------------------------
219 # Print error message $2 and exit this script, returning $1.
220 #-----------------------------------------------------------------------------
230 #-----------------------------------------------------------------------------
231 # Convert integer to partition name.
232 #-----------------------------------------------------------------------------
239 0) p
=a
;; 1) p
=b
;; 2) p
=c
;; 3) p
=d
;;
240 4) p
=e
;; 5) p
=f
;; 6) p
=g
;; 7) p
=h
;;
241 8) p
=i
;; 9) p
=j
;; 10) p
=k
;; 11) p
=l
;;
242 12) p
=m
;; 13) p
=n
;; 14) p
=o
;; 15) p
=p
;;
250 #-----------------------------------------------------------------------------
251 # Convert integer to slice name.
252 #-----------------------------------------------------------------------------
267 #-----------------------------------------------------------------------------
268 # Convert unit, slice, partition to minor number.
269 #-----------------------------------------------------------------------------
271 # ndkminor(unit, slice, partition)
275 echo $
(( (($1 & 31) << 3) | (($1 & 480) << 16) | \
276 (($2 & 15) << 16) | (($2 & 112) << 25) | \
277 ($3 & 7) | (($3 & 8) << 17) | (($3 & 240) << 21) ))
281 #-----------------------------------------------------------------------------
282 # Create the device node.
283 #-----------------------------------------------------------------------------
290 #---------------------------------------------------------------------
291 # Remove old device node, if any.
292 #---------------------------------------------------------------------
294 rm -f "$dev$unit" || exit 1
297 #---------------------------------------------------------------------
298 # Supply default ownership and/or permissions according to the
299 # number of parameters passed to this function.
300 #---------------------------------------------------------------------
303 5) owner=root:wheel; perms=600;;
304 6) owner=$6; perms=600;;
305 7) owner=$6; perms=$7;;
306 *) die 2 "Bad call: mknod $@";;
310 #---------------------------------------------------------------------
311 # Get rid of first two parameters (no longer needed)
312 #---------------------------------------------------------------------
317 #---------------------------------------------------------------------
318 # If there's a /etc/devices.conf file, check for local overrides.
319 #---------------------------------------------------------------------
321 if [ -s $DEVPERMS_LOCAL ]
323 #-------------------------------------------------------------
324 # Temporarily prepend the device portion with a subdir name
325 # if we're not in $DEVDIR. We need to do this to distinguish
326 # between device nodes that live in /dev, and device nodes
327 # that live in /dev/subdir, like /dev/fd. This way, we can
328 # have "fd*" entries in the permission files, as well as
330 #-------------------------------------------------------------
333 pwd=`/usr/bin/basename $PWD`
335 [ "$pwd" = "$DEVDIR" ] || dev="${pwd}/$dev"
338 #-------------------------------------------------------------
339 # Check /etc/devices.conf for local overrides
340 #-------------------------------------------------------------
342 match=`$grep ^$dev$unit[[:space:]] $DEVPERMS_LOCAL | \
346 if [ `expr "$unit" : '\(.*\)\.ctl$'` ]
348 match=`$grep ^$dev\\\*\\\.ctl[[:space:]] \
349 $DEVPERMS_LOCAL | $sed 's/\*/\\\*/'`
351 match=`$grep ^$dev\\\*[[:space:]] $DEVPERMS_LOCAL | \
357 # Separate each field by one space character...
358 match=`echo $match | $tr -s "[:space:]" " "`
360 # ...and extract owenership and permissions.
361 owner=`echo $match | $cut -d' ' -f2`
362 perms=`echo $match | $cut -d' ' -f3`
365 #-------------------------------------------------------------
366 # Restore "plain" device name (no prepending subdir name).
367 #-------------------------------------------------------------
372 #---------------------------------------------------------------------
373 # Finally, set ownership and permissions.
374 #---------------------------------------------------------------------
376 $mknod $dev$unit $1 $2 $3 $owner
377 chmod $perms $dev$unit
381 #-----------------------------------------------------------------------------
382 # Convert tape (ctrl, unit, mode, access) to device minor number.
383 #-----------------------------------------------------------------------------
387 echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
391 #-----------------------------------------------------------------------------
392 # Convert the last character of a tty name to a device minor number.
393 #-----------------------------------------------------------------------------
399 a) m=10;; b) m=11;; c) m=12;; d) m=13;;
400 e) m=14;; f) m=15;; g) m=16;; h) m=17;;
401 i) m=18;; j) m=19;; k) m=20;; l) m=21;;
402 m) m=22;; n) m=23;; o) m=24;; p) m=25;;
403 q) m=26;; r) m=27;; s) m=28;; t) m=29;;
412 #-----------------------------------------------------------------------------
413 # Convert a unit number to a device minor number.
414 #-----------------------------------------------------------------------------
418 echo $(((($1 >> 8) << 16) | ($1 % 256)))
422 #-----------------------------------------------------------------------------
423 # Stallion devices need some (weird) special treatment.
424 #-----------------------------------------------------------------------------
439 if [ $iscallout -gt 0 ]
448 *) die 1 "Invalid stl card number $card";;
451 # Make the mem interface for extracting stats & loading microcode.
452 # 0x1000000 + card number
453 mknod staliomem $card c $major 0x0100000$card
455 while [ $port -lt $maxport ]
457 minor=$(($minorbase + $card * 1048576 + $port))
459 [ $port -lt 32 ] || minor=$(($minor + 65504))
461 unit=$(($card * 64 + $port))
463 mknod ${pref}${letter} $unit c $major $minor $owner
464 mknod ${pref}i${letter} $unit c $major $(($minor + 32)) $owner
465 mknod ${pref}l${letter} $unit c $major $(($minor + 64)) $owner
472 #-----------------------------------------------------------------------------
474 #-----------------------------------------------------------------------------
481 sh MAKEDEV std # standard
482 sh MAKEDEV fd0 fd1 # bdev, floppy disk
483 sh MAKEDEV da0 da1 da2 da3 da4 da5 da6 da7 # bdev, SCSI disk
484 sh MAKEDEV da8 da9 da10 da11 da12 da13 da14 # bdev, SCSI disk
485 sh MAKEDEV da15 # bdev, SCSI disk
486 sh MAKEDEV ccd0 ccd1 ccd2 ccd3 # ccd disk
487 sh MAKEDEV ata # cdev, ATA control
488 sh MAKEDEV ad0 ad1 ad2 ad3 ad4 ad5 ad6 ad7 # bdev, ATA disk
489 sh MAKEDEV ar0 ar1 # bdev, ATA RAID disk
490 sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
491 sh MAKEDEV vn0 vn1 vn2 vn3 # bdev, virtual disk
492 sh MAKEDEV vkd0 # bdev, virtual disk
493 sh MAKEDEV cd0 # bdev, cdrom
494 sh MAKEDEV sa0 wt0 # bdev, tape
495 sh MAKEDEV vty12 # cdev, virtual tty
496 sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty
497 sh MAKEDEV pty0 # cdev, pseudo tty
498 sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty
499 sh MAKEDEV kbd0 kbd1 # cdev, keyboard
500 sh MAKEDEV mse0 psm0 jogdial sysmouse # cdev, mouse
501 sh MAKEDEV pcaudio speaker snd0 # cdev, noise
502 sh MAKEDEV ipsd0 # cdev, ServeRAID disk
503 sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
504 sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port
505 sh MAKEDEV iic0 iic1 # cdev, I2C device
506 sh MAKEDEV smb0 smb1 # cdev, SMBus device
507 sh MAKEDEV usb usb0 uhid0 ums0 ulpt0 ugen0 # cdev, USB devices
508 sh MAKEDEV usb1 uhid1 ums1 ulpt1 ugen1 # cdev, USB devices
509 sh MAKEDEV usb2 usb3 usb4 usb5 usb6 usb7 # cdev, USB devices
510 sh MAKEDEV urio0 uscanner0 umodem0 # cdev, USB devices too
511 sh MAKEDEV ucom0 ucom1 ucom2 ucom3 # cdev, USB serial devices
512 sh MAKEDEV bpf0 bpf1 bpf2 bpf3 # cdev, network
513 sh MAKEDEV ipl tun0 tun1 tun2 tun3 # cdev, network
514 sh MAKEDEV tap0 tap1 tap2 tap3 # cdev, network
515 sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous
516 sh MAKEDEV acpi # cdev, laptop
517 sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop
518 sh MAKEDEV pass4 xpt2 # cdev, CAM
519 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
520 sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN
521 sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN
522 sh MAKEDEV agpgart # cdev, AGP
523 sh MAKEDEV nsmb0 # cdev, SMB/CIFS
524 sh MAKEDEV twed0 # 3ware
525 sh MAKEDEV crypto
# cdev, crypto
526 sh MAKEDEV fw0
# cdev, firewire
527 sh MAKEDEV dcons
# cdev, dcons
532 #-----------------------------------------------------------------------------
533 # A much restricted set of the above, to save precious i-nodes on the
535 #-----------------------------------------------------------------------------
538 sh MAKEDEV std
# standard
539 sh MAKEDEV fd0
# bdev, floppy disk
540 sh MAKEDEV da0
# bdev, SCSI disk
541 sh MAKEDEV ad0
# bdev, ATA disk
542 sh MAKEDEV acd0 afd0 ast0
# bdev, ATAPI devices
543 sh MAKEDEV vn0
# bdev, virtual disk
544 sh MAKEDEV vkd0
# bdev, virtual disk
545 sh MAKEDEV cd0
# bdev, cdrom
546 sh MAKEDEV sa0
# bdev, tape
547 sh MAKEDEV vty2
# cdev, virtual tty
548 sh MAKEDEV cuaa0
# cdev, serial tty
549 sh MAKEDEV pty0
# cdev, pseudo tty
550 sh MAKEDEV ttyd0
# cdev, serial tty
551 sh MAKEDEV kbd0
# cdev, keyboard
552 sh MAKEDEV mse0 psm0 sysmouse
# cdev, mouse
553 sh MAKEDEV lpt0
# cdev, printer
554 sh MAKEDEV ppi0
# cdev, parallel port
555 sh MAKEDEV iic0
# cdev, I2C device
556 sh MAKEDEV smb0
# cdev, SMBus device
557 sh MAKEDEV ums0
# cdev, USB devices
558 sh MAKEDEV tun0
# cdev, network
559 sh MAKEDEV tap0
# cdev, network
560 sh MAKEDEV ch0
# cdev, miscellaneous
561 sh MAKEDEV apm apmctl card0
# cdev, laptop
562 sh MAKEDEV pass1 xpt1
# cdev, CAM
563 sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1
# cdev, ISDN
564 sh MAKEDEV i4btel0 i4bteld0
# cdev, ISDN
565 sh MAKEDEV i4brbch0
# cdev, ISDN
569 #-----------------------------------------------------------------------------
570 # Upgrade existing node set.
572 # 1.9 - disk devices have changed
573 #-----------------------------------------------------------------------------
575 echo -n "upgrading... "
576 for i
in aacd ad
ar afd amrd ccd da fd idad ipsd md \
579 for j
in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
584 echo -n " $i$j $i${j}s0[a-p] $i${j}s1[a-p]"
586 # s0 and s1 handled by base
587 for k
in s2 s3 s4 s5 s6 s7 s8 s9 s10 s11 \
590 if [ -c $i$j${k}c
]; then
594 echo -n " $i$j$k[a-p]"
596 elif [ -c $i$j$k ]; then
607 for j
in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
611 echo -n " $i$j $i${j}s0 $i${j}[a-p]"
613 elif [ -c $i${j}c
]; then
615 echo -n " $i$j $i${j}s0 $i${j}[a-p]"
623 #-----------------------------------------------------------------------------
624 # Basic device node set.
625 #-----------------------------------------------------------------------------
628 mknod console
"" c
0 0
629 mknod kmem
"" c
2 1 root
:kmem
640
630 mknod mem
"" c
2 0 root
:kmem
640
631 mknod null
"" c
2 2 root
:wheel
666
632 mknod random
"" c
2 3 root
:wheel
644
633 mknod urandom
"" c
2 4 root
:wheel
644
634 mknod zero
"" c
2 12 root
:wheel
666
636 mknod tty
"" c
1 0 root
:wheel
666
638 mknod stdin
"" c
22 0 root
:wheel
666
639 mknod stdout
"" c
22 1 root
:wheel
666
640 mknod stderr
"" c
22 2 root
:wheel
666
641 mknod pci
"" c
78 0 root
:wheel
644
644 #---------------------------------------------------------------------
645 # Create floppy disk nodes in /dev/fd
646 #---------------------------------------------------------------------
654 mknod
$i "" c
22 $i root
:wheel
666
662 #-----------------------------------------------------------------------------
667 rm mem kmem pci io klog console
674 #-----------------------------------------------------------------------------
679 mknod mouse
"" c
24 0
681 mknod timezone
"" c
26 0
684 #-----------------------------------------------------------------------------
687 u
=`expr $i : '..\(.*\)'`
691 # Default density, 512b blocks
692 mknod rwt
$u c
10 $
((0 + $u)) root
:operator
660
693 mknod nrwt
$u c
10 $
((4 + $u)) root
:operator
660
695 # Default density, 1024b blocks
696 # mknod rWt $u c 10 $((64 + $u)) root:operator 660
697 # mknod nrWt $u c 10 $((68 + $u)) root:operator 660
698 mknod rwt
${u}b c
10 $
((16 + $u)) root
:operator
660 # 60 MB
699 mknod nrwt
${u}b c
10 $
((20 + $u)) root
:operator
660
700 mknod rwt
${u}c c
10 $
((24 + $u)) root
:operator
660 # 120 MB
701 mknod nrwt
${u}c c
10 $
((28 + $u)) root
:operator
660
702 mknod rwt
${u}d c
10 $
((32 + $u)) root
:operator
660 # 150 MB
703 mknod nrwt
${u}d c
10 $
((36 + $u)) root
:operator
660
704 # mknod rwt ${u}e c 10 $((40 + $u)) root:operator 660 # 300 MB?
705 # mknod nrwt ${u}e c 10 $((44 + $u)) root:operator 660
706 # mknod rwt ${u}f c 10 $((48 + $u)) root:operator 660 # 600 MB?
707 # mknod nrwt ${u}f c 10 $((52 + $u)) root:operator 660
710 #-----------------------------------------------------------------------------
712 aacd
*s
*|acd
*s
*|ad
*s
*|
ar*s
*|afd
*s
*|amrd
*s
*|ccd
*s
*|da
*s
*|fd
*s
*|idad
*s
*|ipsd
*s
*|md
*s
*|mlxd
*s
*|pst
*s
*|twed
*s
*|vn
*s
*|vkd
*s
*)
714 aacd
*s
*) name
=aacd
; chr
=151;;
715 acd
*s
*) name
=acd
; chr
=117;;
716 ad
*s
*) name
=ad
; chr
=116;;
717 ar*s
*) name
=ar; chr
=157;;
718 afd
*s
*) name
=afd
; chr
=118;;
719 amrd
*s
*) name
=amrd
; chr
=133;;
720 ccd
*s
*) name
=ccd
; chr
=74;;
721 da
*s
*) name
=da
; chr
=13;;
722 fd
*s
*) name
=fd
; chr
=9;;
723 idad
*s
*) name
=idad
; chr
=109;;
724 ipsd
*s
*) name
=ipsd
; chr
=176;;
725 md
*s
*) name
=md
; chr
=95;;
726 mlxd
*s
*) name
=mlxd
; chr
=131;;
727 pst
*s
*) name
=pst
; chr
=168;;
728 twed
*s
*) name
=twed
; chr
=147;;
729 vn
*s
*) name
=vn
; chr
=43;;
730 vkd
*s
*) name
=vkd
; chr
=97;;
734 aacd
*s
*|amrd
*s
*|idad
*s
*|ipsd
*s
*|mlxd
*s
*|twed
*s
*)
735 unit
=`expr $i : '....\([0-9]*\)s'`
736 slice
=`expr $i : '....[0-9]*s\([0-9]*\)'`
737 part
=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
740 acd
*s
*|afd
*s
*|ccd
*s
*|pst
*s
*|wfd
*s
*|vkd
*s
*)
741 unit
=`expr $i : '...\([0-9]*\)s'`
742 slice
=`expr $i : '...[0-9]*s\([0-9]*\)'`
743 part
=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
746 unit
=`expr $i : '..\([0-9]*\)s'`
747 slice
=`expr $i : '..[0-9]*s\([0-9]*\)'`
748 part
=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
753 [0-9]|
[0-9][0-9]|
[0-4][0-9][0-9]|
50[0-9]|
51[0-1])
756 # [no s*] == whole-disk slice (slice #1 in minor)
757 # s0 == slice #0 in minor (compatibility slice)
758 # s1 == slice #2 in minor
759 # s2 == slice #3 in minor
762 # set slice to slice-in-minor-number
764 if [ $oldslice -eq 0 ]; then
769 slicename
=`dkitos $slice`
770 minor
=`ndkminor $unit $slice 255`
771 mknod
${name} $unit$slicename c
$chr $minor \
774 # raw device names are extinct
775 rm -f r
$name$unit$slicename
777 # get rid of old compatibility devices, the new
778 # ones use 's0', e.g. da0s0a
779 for i
in a b c d e f g h i j k l m n o p
786 for part
in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
788 minor
=`ndkminor $unit $slice $part`
789 partname
=`dkitop $part`
790 mknod
$name $unit$slicename$partname \
791 c
$chr $minor root
:operator
640
792 rm -f r
$name$unit$slicename$partname
797 *) echo bad partition
for disk
in: $i
802 echo bad slice
for disk
in: $i
807 echo bad unit
for disk
in: $i "(unit=$unit, slice=$slice, part=$part)"
812 #-----------------------------------------------------------------------------
815 unit
=`expr $i : '..........\(.*\)'`
820 minor
=`ndkminor $unit 1 129`
821 mknod
$name ${unit}.1720 c
$chr $minor
822 rm -f r
${name}${unit}.1720
824 minor
=`ndkminor $unit 1 130`
825 mknod
$name ${unit}.1480 c
$chr $minor
826 rm -f r
${name}${unit}.1480
828 minor
=`ndkminor $unit 1 131`
829 mknod
$name ${unit}.1440 c
$chr $minor
830 rm -f r
${name}${unit}.1440
832 minor
=`ndkminor $unit 1 132`
833 mknod
$name ${unit}.1200 c
$chr $minor
834 rm -f r
${name}${unit}.1200
836 minor
=`ndkminor $unit 1 133`
837 mknod
$name ${unit}.820 c
$chr $minor
838 rm -f r
${name}${unit}.820
840 minor
=`ndkminor $unit 1 134`
841 mknod
$name ${unit}.800 c
$chr $minor
842 rm -f r
${name}${unit}.800
844 minor
=`ndkminor $unit 1 135`
845 mknod
$name ${unit}.720 c
$chr $minor
846 rm -f r
${name}${unit}.720
848 minor
=`ndkminor $unit 1 136`
849 mknod
$name ${unit}.360 c
$chr $minor
850 rm -f r
${name}${unit}.360
852 minor
=`ndkminor $unit 1 137`
853 mknod
$name ${unit}.640 c
$chr $minor
854 rm -f r
${name}${unit}.640
856 minor
=`ndkminor $unit 1 138`
857 mknod
$name ${unit}.1232 c
$chr $minor
858 rm -f r
${name}${unit}.1232
861 echo bad unit
for disk
in: $i
866 #-----------------------------------------------------------------------------
869 units
=`expr $i : '...\(.*\)t'`;
870 tracks
=`expr $i : '.*t\(.*\)'`;
874 [ "$units" ] || units
=0
875 [ "$tracks" ] || tracks
=100
877 if [ "$units" -le 31 -a "$tracks" -le 169 ]
880 while [ $i -le $units ]
886 while [ $j -le $tracks ]
888 # cd unit tracks use the compatibility slice
889 # and partition numbers 129+ for tracks 1+.
891 minor
=`ndkminor $i 1 $(($j + 128))`
892 mknod
${dname}t
$j c
$chr $minor \
900 echo "$i is invalid -- can't have more than 32 cd devices or 169 tracks"
904 #-----------------------------------------------------------------------------
906 aacd
*|acd
*|ad
*|
ar*|afd
*|amrd
*|
cd*|ccd
*|da
*|fd
*|idad
*|ipsd
*|md
*|mlxd
*|pst
*|twed
*|vcd
*|vn
*|vkd
*)
910 aacd
*) name
=aacd
; chr
=151;;
911 acd
*) name
=acd
; chr
=117; doslices
=0; directraw
=1;;
912 ad
*) name
=ad
; chr
=116;;
913 ar*) name
=ar; chr
=157;;
914 afd
*) name
=afd
; chr
=118;;
915 amrd
*) name
=amrd
; chr
=133;;
916 cd*) name
=cd; chr
=15; doslices
=0;;
917 da
*) name
=da
; chr
=13;;
918 fd
*) name
=fd
; chr
=9;;
919 ccd
*) name
=ccd
; chr
=74;;
920 idad
*) name
=idad
; chr
=109;;
921 ipsd
*) name
=ipsd
; chr
=176;;
922 md
*) name
=md
; chr
=95;;
923 mlxd
*) name
=mlxd
; chr
=131;;
924 pst
*) name
=pst
; chr
=168;;
925 twed
*) name
=twed
; chr
=147;;
926 vcd
*) name
=vcd
; chr
=98; doslices
=0;;
927 vn
*) name
=vn
; chr
=43;;
928 vkd
*) name
=vkd
; chr
=97;;
932 aacd
*|amrd
*|idad
*|ipsd
*|mlxd
*|twed
*)
933 unit
=`expr $i : '....\(.*\)'`
935 acd
*|afd
*|ccd
*|pst
*|wfd
*|vcd
*|vkd
*)
936 unit
=`expr $i : '...\(.*\)'`
939 unit
=`expr $i : '..\(.*\)'`
945 sh MAKEDEV control-
$name$unit
950 [0-9]|
[0-9][0-9]|
[0-4][0-9][0-9]|
50[0-9]|
51[0-1])
951 if [ "$doslices" -gt 0 ]; then
952 minor
=`ndkminor $unit 1 255`
953 mknod
${name} ${unit} c
$chr $minor \
955 for slicepartname
in s0h s1h s2 s3 s4
957 sh MAKEDEV
$name$unit$slicepartname
960 if [ "$directraw" -gt 0 ]; then
961 minor
=`ndkminor $unit 1 128`
962 mknod
${name} ${unit} c
$chr $minor \
965 minor
=`ndkminor $unit 1 255`
966 mknod
${name} ${unit} c
$chr $minor \
969 minor
=`ndkminor $unit 1 255`
970 mknod
${name} ${unit}s0 c
$chr $minor \
972 minor
=`ndkminor $unit 0 0`
973 mknod
${name} ${unit}a c
$chr $minor \
975 minor
=`ndkminor $unit 0 2`
976 mknod
${name} ${unit}c c
$chr $minor \
981 echo bad unit
for disk
in: $i
986 #-----------------------------------------------------------------------------
991 unit
=`expr $i : 'pt\([0-9][0-9]*\)'`
993 [ "$unit" ] || unit
=0
995 unit
=$
(($unit + 1 - 1))
996 mknod
$name $unit c
$chr `unit2minor $unit`
999 #-----------------------------------------------------------------------------
1004 unit
=`expr $i : 'ses\([0-9][0-9]*\)'`
1006 [ "$unit" ] || unit
=0
1008 unit
=$
(($unit + 1 - 1))
1009 mknod
$name $unit c
$chr `unit2minor $unit`
1012 #-----------------------------------------------------------------------------
1017 unit
=`expr $i : 'targ\([0-9][0-9]*\)'`
1019 [ "$unit" ] || unit
=0
1021 unit
=$
(($unit + 1 - 1))
1023 mknod
$name $unit c
$chr `unit2minor $unit`
1024 mknod
${name}.ctl
"" c
$chr 0xffff00ff
1027 #-----------------------------------------------------------------------------
1029 # CAM transport layer device
1031 # This major number is temporary
1034 units
=`expr $i : 'xpt\(.*\)'`
1036 [ "$units" ] || units
=1
1039 while [ $i -lt $units ]
1043 mknod
$name $i c
$chr `unit2minor $i` root
:operator
1049 #-----------------------------------------------------------------------------
1052 # This major number is temporary
1055 units
=`expr $i : 'pass\(.*\)'`
1057 [ "$units" ] || units
=1
1060 while [ $i -lt $units ]
1064 mknod
$name $i c
$chr `unit2minor $i` root
:operator
1070 #-----------------------------------------------------------------------------
1073 class
=`expr $i : 'pty\(.*\)'`
1075 0) offset
=0 name
=p
;;
1076 1) offset
=32 name
=q
;;
1077 2) offset
=64 name
=r
;;
1078 3) offset
=96 name
=s
;;
1079 4) offset
=128 name
=P
;; # Note that xterm (at least) only look at p-s.
1080 5) offset
=160 name
=Q
;;
1081 6) offset
=192 name
=R
;;
1082 7) offset
=224 name
=S
;;
1083 *) echo bad unit
for pty
in: $i;;
1091 c
=$
(echo 0123456789abcdefghijklmnopqrstuv |
1092 dd bs
=1 skip
=$i count
=1 2>/dev
/null
)
1094 mknod tty
$name $c c
5 $
(($offset + $i)) root
:wheel
666
1095 mknod pty
$name $c c
6 $
(($offset + $i)) root
:wheel
666
1103 #-----------------------------------------------------------------------------
1106 unit
=`expr $i : '..\(.*\)'`
1110 [0-9]|
[1-9][0-9]|
[1-9][0-9][0-9]|
[1-9][0-9][0-9][0-9])
1111 mknod sa
${unit}.ctl c
$chr `saminor 1 ${unit} 0 0` \
1113 ln -f sa
${unit}.ctl rsa
${unit}.ctl
1117 mknod sa
${unit}.
$m c
$chr \
1118 `saminor 0 $unit $m 0` root
:operator
660
1119 ln -f sa
${unit}.
$m rsa
${unit}.
$m
1121 mknod nsa
${unit}.
$m c
$chr \
1122 `saminor 0 $unit $m 1` root
:operator
660
1123 ln -f nsa
${unit}.
$m nrsa
${unit}.
$m
1125 mknod esa
${unit}.
$m c
$chr \
1126 `saminor 0 $unit $m 2` root
:operator
660
1127 ln -f esa
${unit}.
$m ersa
${unit}.
$m
1130 ln -f sa
${unit}.0 sa
$unit
1131 ln -f sa
${unit}.0 rsa
${unit}.0
1132 ln -f sa
${unit}.0 rsa
$unit
1133 ln -f nsa
${unit}.0 nsa
$unit
1134 ln -f nsa
${unit}.0 nrsa
${unit}.0
1135 ln -f nsa
${unit}.0 nrsa
$unit
1136 ln -f esa
${unit}.0 esa
$unit
1137 ln -f esa
${unit}.0 ersa
${unit}.0
1138 ln -f esa
${unit}.0 ersa
$unit
1141 echo bad unit
for tape
in: $i
1146 #-----------------------------------------------------------------------------
1149 unit
=`expr $i : '..\(.*\)'`
1152 ch
*) name
=ch
; chr
=17;;
1157 mknod
$name $unit c
$chr $unit root
:operator
640
1160 echo bad unit
for media changer
in: $i
1165 #-----------------------------------------------------------------------------
1168 mknod ata
"" c
159 0 root
:operator
1171 #-----------------------------------------------------------------------------
1174 unit
=`expr $i : '...\(.*\)'`
1179 mknod ast
$unit c
$chr $
(($unit * 8 + 0)) root
:operator
640
1180 mknod nast
$unit c
$chr $
(($unit * 8 + 1)) root
:operator
640
1183 echo bad unit
for tape
in: $i
1188 #-----------------------------------------------------------------------------
1191 unit
=`expr $i : 'iic\(.*\)'`
1193 mknod iic
$unit c
105 `unit2minor $unit`
1196 #-----------------------------------------------------------------------------
1199 unit
=`expr $i : 'smb\(.*\)'`
1201 mknod smb
$unit c
106 `unit2minor $unit`
1204 #-----------------------------------------------------------------------------
1207 unit
=`expr $i : 'pcfclock\(.*\)'`
1209 mknod pcfclock
$unit c
140 `unit2minor $unit`
1212 #-----------------------------------------------------------------------------
1215 unit
=`expr $i : 'ppi\(.*\)'`
1217 mknod ppi
$unit c
82 `unit2minor $unit`
1220 #-----------------------------------------------------------------------------
1223 unit
=`expr $i : 'pps\(.*\)'`
1225 mknod pps
$unit c
89 `unit2minor $unit`
1228 #-----------------------------------------------------------------------------
1231 mknod usb
"" c
108 255 root
:operator
0660
1234 #-----------------------------------------------------------------------------
1237 unit
=`expr $i : 'usb\(.*\)'`
1239 mknod usb
$unit c
108 `unit2minor $unit` root
:operator
660
1242 #-----------------------------------------------------------------------------
1245 unit
=`expr $i : 'ucom\(.*\)'`
1247 minor
=$
(($unit + 128))
1248 minor
=`unit2minor $(($unit + 128))`
1250 mknod ucom
$unit c
138 $minor uucp:dialer
660
1253 #-----------------------------------------------------------------------------
1256 unit
=`expr $i : 'uhid\(.*\)'`
1258 mknod uhid
$unit c
122 `unit2minor $unit` root
:operator
660
1261 #-----------------------------------------------------------------------------
1264 unit
=`expr $i : 'ums\(.*\)'`
1266 mknod ums
$unit c
111 `unit2minor $unit` root
:operator
660
1269 #-----------------------------------------------------------------------------
1272 unit
=`expr $i : 'ulpt\(.*\)'`
1274 minor
=`unit2minor $unit`
1275 mknod ulpt
$unit c
113 $minor
1277 minor
=`unit2minor $(($unit + 64))`
1278 mknod unlpt
$unit c
113 $minor # and the 'no prime' version
1281 #-----------------------------------------------------------------------------
1284 unit
=`expr $i : 'ugen\([0-9][0-9]*\)'`
1285 endpoint
=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
1287 [ "$unit" ] ||
echo $i - Invalid unit number
1289 if [ -z "${endpoint}" ] # ugen0 & ugen0.1 - ugen0.15
1291 mknod ugen
$unit c
114 `unit2minor $(($unit * 16))` \
1296 mknod ugen
$unit.
$i c
114 `unit2minor \
1297 $(($unit * 16 + $i))` root
:operator
660
1302 minor
=`unit2minor $(($unit * 16 + $endpoint))`
1303 mknod ugen
$unit.
$endpoint c
114 $minor root
:operator
660
1307 #-----------------------------------------------------------------------------
1310 unit
=`expr $i : 'urio\(.*\)'`
1312 mknod urio
$unit c
143 `unit2minor $unit` root
:operator
660
1315 #-----------------------------------------------------------------------------
1318 unit
=`expr $i : 'uscanner\(.*\)'`
1320 mknod uscanner
$unit c
156 `unit2minor $unit` root
:operator
660
1323 #-----------------------------------------------------------------------------
1326 unit
=`expr $i : 'umodem\(.*\)'`
1328 mknod umodem
$unit c
124 `unit2minor $unit` uucp:dialer
660
1331 #-----------------------------------------------------------------------------
1334 unit
=`expr $i : 'lpt\(.*\)'`
1336 mknod lpt
$unit c
16 `unit2minor $unit`
1337 mknod lpctl
$unit c
16 `unit2minor $(($unit + 128))`
1340 #-----------------------------------------------------------------------------
1344 units
=`expr $i : 'vty\(.*\)'`
1347 while [ $i -lt $units ]
1349 mknod ttyv $
(printf %01x
$i) c
$chr `unit2minor $i`
1357 #-----------------------------------------------------------------------------
1360 units
=`expr $i : 'nmdm\(.*\)'`
1364 while [ $i -lt $units ]
1366 minor
=`unit2minor $i`
1367 minor
=$
(($minor + $minor))
1368 mknod nmdm
${i}A c
$chr $minor
1369 mknod nmdm
${i}B c
$chr $
(($minor + 1))
1375 #-----------------------------------------------------------------------------
1378 nbpf
=`expr $i : 'bpf\(.*\)$'`
1381 while [ $unit -le $nbpf ]
1383 mknod bpf
$unit c
23 `unit2minor $unit`
1389 #-----------------------------------------------------------------------------
1392 mknod speaker
"" c
26 0
1395 #-----------------------------------------------------------------------------
1398 unit_low
=`expr $i : 'cua.*\(.\)$'`
1406 unit_high
=`expr $i : 'cuaa\(.\).$'`
1407 m_high
=`ttyminor $unit_high`
1411 unit
=$unit_high$unit_low
1412 m
=$
(($m_high << 16 | `ttyminor $unit_low`))
1414 mknod cuaa $unit c 28 $(($m | 128)) uucp:dialer 660
1415 mknod cuaia $unit c 28 $(($m | 32 | 128)) uucp:dialer 660
1416 mknod cuala $unit c 28 $(($m | 64 | 128)) uucp:dialer 660
1419 #-----------------------------------------------------------------------------
1422 mknod crypto "" c 70 0 root:operator 666
1425 #-----------------------------------------------------------------------------
1428 mknod pf "" c 73 0 root:operator 600
1431 #-----------------------------------------------------------------------------
1434 unit=`expr $i : 'fw\(.\)$'`
1438 minor=$(($unit << 16 |
$sub))
1439 mknod fw $unit.$sub c 127 $minor root:operator 660
1440 mknod fwmem $unit.$sub c 127 $((1<<24 | $minor)) \
1444 ln -sf fw$unit.0 fw$unit
1445 ln -sf fwmem$unit.0 fwmem$unit
1448 #-----------------------------------------------------------------------------
1451 mknod dcons "" c 184 0 root:wheel 600
1454 #-----------------------------------------------------------------------------
1456 tty?|tty0?|ttyd?|ttyd??)
1457 unit_low=`expr $i : 'tty.*\(.\)$'`
1465 unit_high=`expr $i : 'ttyd\(.\).$'`
1466 m_high=`ttyminor $unit_high`
1470 unit=$unit_high$unit_low
1471 m=$(($m_high << 16 | `ttyminor $unit_low`))
1473 mknod ttyd $unit c 28 $m
1474 mknod ttyid $unit c 28 $(($m | 32))
1475 mknod ttyld $unit c 28 $(($m | 64))
1478 #-----------------------------------------------------------------------------
1481 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1482 g h i j k l m n o p q r s t u v"
1484 card=`expr $i : 'cua.*\(.\)$'`
1486 for unit in $portlist
1488 minor=`ttyminor $unit`
1489 minor=$(($card * 65536 + $minor))
1492 mknod cuac $name c $major $(($minor + 128)) uucp:dialer 660
1493 mknod cuaic $name c $major $(($minor + 32 + 128)) \
1495 mknod cualc $name c $major $(($minor + 64 + 128)) \
1500 #-----------------------------------------------------------------------------
1503 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
1504 g h i j k l m n o p q r s t u v"
1506 card=`expr $i : 'tty.*\(.\)$'`
1508 for unit in $portlist
1510 minor=`ttyminor $unit`
1511 minor=$(($card * 65536 + $minor))
1514 mknod ttyc $name c $major $minor
1515 mknod ttyic $name c $major $(($minor + 32))
1516 mknod ttylc $name c $major $(($minor + 64))
1520 #-----------------------------------------------------------------------------
1523 unit=`expr $i : 'cua.*\(.\)$'`
1527 mknod cuam $unit c 63 $(($m + 128)) uucp:dialer 660
1530 #-----------------------------------------------------------------------------
1533 unit=`expr $i : 'tty.*\(.\)$'`
1537 mknod ttym $unit c 63 $m
1540 #-----------------------------------------------------------------------------
1544 nports=`expr $i : 'ttyA\(.*\)$'`
1547 while [ $port -le $nports ]
1549 minor=$(($port - 1))
1550 name=$(printf %02d $port)
1552 mknod ttyA $name c $major $minor
1553 mknod ttyiA $name c $major $(($minor + 65536))
1554 mknod ttylA $name c $major $(($minor + 131072))
1559 # For the user-mode control program, 'sicontrol'
1560 mknod si_control "" c 68 262144
1563 #-----------------------------------------------------------------------------
1567 nports=`expr $i : 'cuaA\(.*\)$'`
1570 while [ $port -le $nports ]
1572 minor=$(($port - 1))
1573 name=$(printf %02d $port)
1575 mknod cuaA $name c $major $(($minor + 128)) uucp:dialer 660
1576 mknod cuaiA $name c $major $(($minor + 128 + 65536)) \
1578 mknod cualA $name c $major $(($minor + 128 + 131072)) \
1585 #-----------------------------------------------------------------------------
1588 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1590 card=`expr $i : 'tty.*\(.\)$'`
1592 for unit in $portlist
1594 minor=`ttyminor $unit`
1595 minor=$(($card * 65536 + $minor))
1598 mknod ttyD $name c $major $minor
1599 mknod ttyiD $name c $major $(($minor + 32))
1600 mknod ttylD $name c $major $(($minor + 64))
1604 #-----------------------------------------------------------------------------
1607 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1609 card=`expr $i : 'cua.*\(.\)$'`
1611 for unit in $portlist
1613 minor=`ttyminor $unit`
1614 minor=$(($card * 65536 + $minor))
1617 mknod cuaD $name c $major $(($minor + 128)) uucp:dialer 660
1618 mknod cuaiD $name c $major $(($minor + 32 + 128)) \
1620 mknod cualD $name c $major $(($minor + 64 + 128)) \
1625 #-----------------------------------------------------------------------------
1628 stallion 72 E `expr $i : 'tty.*\(.\)$'` 0
1631 stallion 72 E `expr $i : 'cua.*\(.\)$'` 1
1634 card=`expr $i : 'stl\(.\)$'`
1635 stallion 72 E $card 0
1636 stallion 72 E $card 1
1640 stallion 75 F `expr $i : 'tty.*\(.\)$'` 0
1643 stallion 75 F `expr $i : 'cua.*\(.\)$'` 1
1646 card=`expr $i : 'stl\(.\)$'`
1647 stallion 75 F $card 0
1648 stallion 75 F $card 1
1652 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1653 modulelist="a b c d"
1655 card=`expr $i : 'tty.*\(.\)$'`
1657 for unit in $modulelist
1659 moduleminor=`ttyminor $unit`
1660 moduleminor=$(($moduleminor % 10 * 16))
1663 for unit
in $portlist
1665 minor
=`ttyminor $unit`
1666 minor
=$
(($card * 65536 + $minor + $moduleminor))
1667 name
=$card$modulename$unit
1671 mknod ttyM
$name c
$major $minor
1672 mknod ttyiM
$name c
$major $
(($minor + 64))
1673 mknod ttylM
$name c
$major $
(($minor + 128))
1679 portlist
="0 1 2 3 4 5 6 7 8 9 a b c d e f"
1680 modulelist
="a b c d"
1682 card
=`expr $i : 'cua.*\(.\)$'`
1684 for unit
in $modulelist
1686 moduleminor
=`ttyminor $unit`
1687 moduleminor
=$
(($moduleminor % 10 * 16))
1690 for unit
in $portlist
1692 minor
=`ttyminor $unit`
1693 minor
=$
(($card * 65536 + $minor + $moduleminor))
1694 name
=$card$modulename$unit
1698 mknod cuaM
$name c
$major $
(($minor + 262144)) \
1700 mknod cuaiM
$name c
$major $
(($minor + 64 + 262144)) \
1702 mknod cualM
$name c
$major $
(($minor + 128 + 262144)) \
1711 MINOR
=$
(($BOARD * 65536))
1713 dmesg |
while read first rest
1716 RocketPort
[0-4]) echo "$first"
1721 rm -f ttyR
* ttyiR
* ttylR
*
1723 for i
in $controllers
1726 dmesg |
while read first bar ports rest
1734 echo -n "Creating $ndevices devices for $i: "
1737 while [ $dev -lt $ndevices ]
1739 mknod ttyR
$Rnum c
$major $MINOR
1740 mknod ttyiR
$Rnum c
$major $
(($MINOR + 32))
1741 mknod ttylR
$Rnum c
$major $
(($MINOR + 64))
1744 MINOR
=$
(($MINOR + 1))
1749 BOARD
=$
(($BOARD + 1))
1750 MINOR
=$
(($BOARD * 65536))
1758 MINOR
=$
(($BOARD * 65536))
1760 dmesg |
while read first rest
1763 RocketPort
[0-4]) echo "$first"
1768 rm -f cuaR
* cuaiR
* cualR
*
1770 for i
in $controllers
1773 dmesg |
while read first bar ports rest
1781 echo -n "Creating $ndevices devices for $i: "
1784 while [ $dev -lt $ndevices ]
1786 mknod cuaR
$Rnum c
$major $
(($MINOR + 128)) \
1788 mknod cuaiR
$Rnum c
$major $
(($MINOR + 128 + 32)) \
1790 mknod cualR
$Rnum c
$major $
(($MINOR + 128 + 64)) \
1794 MINOR
=$
(($MINOR + 1))
1799 BOARD
=$
(($BOARD + 1))
1800 MINOR
=$
(($BOARD * 65536))
1805 #-----------------------------------------------------------------------------
1808 unit
=`expr $i : 'mse\(.*\)'`
1811 # Non-blocking for X11
1812 mknod mse
$unit c
$chr `unit2minor $(($unit * 2 + 1))`
1815 #-----------------------------------------------------------------------------
1818 unit
=`expr $i : 'psm\(.*\)'`
1821 # Non-blocking for X11
1822 mknod psm
$unit c
$chr `unit2minor $(($unit * 2 + 1))`
1825 #-----------------------------------------------------------------------------
1828 name
=`expr $i : 'mouse\(.*\)'`
1830 [ -c $name ] ||
$0 $name # Make the appropriate device
1835 #-----------------------------------------------------------------------------
1838 mknod pcaudio
"" c
24 0
1839 mknod pcaudioctl
"" c
24 128
1842 #-----------------------------------------------------------------------------
1845 mknod socksys
"" c
41 0 root
:wheel
666
1846 mknod spx
"" c
41 1 root
:wheel
666
1851 #-----------------------------------------------------------------------------
1855 unit
=`expr $i : 'snd\(.*\)'`
1858 ln -fs mixer
$unit mixer
1859 ln -fs sequencer
$unit sequencer
1861 ln -fs audio
$unit audio
1862 ln -fs dspW
$unit dspW
1863 ln -fs music
$unit music
1865 ln -fs dsp
$unit.0 dsp
$unit
1866 ln -fs audio
$unit.0 audio
$unit
1867 ln -fs dspW
$unit.0 dspW
$unit
1869 mknod mixer
$unit c
$chr `unit2minor $(($unit * 16 + 0))` \
1871 mknod sequencer
$unit c
$chr `unit2minor $(($unit * 16 + 1))` \
1873 mknod midi
$unit c
$chr `unit2minor $(($unit * 16 + 2))` \
1878 minor
=$
(($chn * 65536 + $unit * 16))
1880 mknod dsp
$unit.
$chn c
$chr $
(($minor + 3)) root
:wheel
666
1881 mknod audio
$unit.
$chn c
$chr $
(($minor + 4)) root
:wheel
666
1882 mknod dspW
$unit.
$chn c
$chr $
(($minor + 5)) root
:wheel
666
1885 mknod sndstat
"" c
$chr 6 root
:wheel
666
1886 mknod music
$unit c
$chr `unit2minor $(($unit * 16 + 8))` root
:wheel
666
1887 mknod pss
$unit c
$chr `unit2minor $(($unit * 16 + 9))` root
:wheel
666
1890 #-----------------------------------------------------------------------------
1893 mknod vatio
"" c
25 128 root
:wheel
660
1896 #-----------------------------------------------------------------------------
1899 unit
=`expr $i : 'gsc\(.*\)'`
1901 mknod gsc
$unit c
47 `unit2minor $unit` root
:wheel
666
1902 mknod gsc
${unit}p c
47 `unit2minor $(($unit + 8))` root
:wheel
666
1903 mknod gsc
${unit}d c
47 `unit2minor $(($unit + 32))` root
:wheel
666
1904 mknod gsc
${unit}pd c
47 `unit2minor $(($unit + 40))` root
:wheel
666
1907 #-----------------------------------------------------------------------------
1910 mknod acpi
"" c
152 0 root
:operator
664
1913 #-----------------------------------------------------------------------------
1916 mknod apm
"" c
39 0 root
:operator
664
1919 #-----------------------------------------------------------------------------
1922 mknod apmctl
"" c
39 8 root
:operator
660
1925 #-----------------------------------------------------------------------------
1928 unit
=`expr $i : 'card\(.*\)'`
1931 mknod card
$unit c
$chr `unit2minor $unit` root
:wheel
644
1934 #-----------------------------------------------------------------------------
1938 *0) unit
=0;; *1) unit
=1;; *2) unit
=2;; *3) unit
=3;;
1939 *4) unit
=4;; *5) unit
=5;; *6) unit
=6;; *7) unit
=7;;
1940 *8) unit
=8;; *9) unit
=9;; *a
) unit
=10;; *b
) unit
=11;;
1941 *c
) unit
=12;; *d
) unit
=13;; *e
) unit
=14;; *f
) unit
=15;;
1945 ttyy?
) unit
=$
(($unit + 16));;
1946 ttyz?
) unit
=$
(($unit + 32));;
1949 mknod
$i "" c
42 $unit
1952 #-----------------------------------------------------------------------------
1955 mknod cronyx
"" c
42 63
1958 #-----------------------------------------------------------------------------
1961 mknod joy
0 c
51 0 root
:operator
640
1962 mknod joy
1 c
51 1 root
:operator
640
1965 #-----------------------------------------------------------------------------
1968 mknod spigot
"" c
11 0 root
:wheel
444
1971 #-----------------------------------------------------------------------------
1974 unit
=`expr $i : 'ctx\(.*\)'`
1976 mknod ctx
$unit c
40 `unit2minor $unit` root
:wheel
444
1979 #-----------------------------------------------------------------------------
1982 unit
=`expr $i : 'meteor\(.*\)'`
1984 mknod meteor
$unit c
67 `unit2minor $unit` root
:wheel
444
1987 #-----------------------------------------------------------------------------
1990 unit
=`expr $i : 'bktr\(.*\)'`
1992 mknod bktr
$unit c
92 `unit2minor $unit` root
:wheel
444
1993 mknod tuner
$unit c
92 `unit2minor $((16 + $unit))` root
:wheel
444
1994 mknod vbi
$unit c
92 `unit2minor $((32 + $unit))` root
:wheel
444
1997 #-----------------------------------------------------------------------------
2000 ntun
=`expr $i : 'tun\(.*\)$'`
2003 while [ $unit -le $ntun ]
2005 mknod tun
$unit c
52 `unit2minor $unit`
2011 #-----------------------------------------------------------------------------
2014 ntap
=`expr $i : 'tap\(.*\)$'`
2017 while [ $unit -le $ntap ]
2019 mknod tap
$unit c
149 `unit2minor $unit` root
:network
2025 #-----------------------------------------------------------------------------
2028 mknod sysmouse
"" c
12 128
2029 mknod consolectl
"" c
12 255
2032 #-----------------------------------------------------------------------------
2035 mknod jogdial
"" c
160 0
2038 #-----------------------------------------------------------------------------
2041 unit
=`expr $i : 'snp\(.*\)'`
2043 mknod snp
$unit c
53 `unit2minor $unit`
2046 #-----------------------------------------------------------------------------
2052 unit
=`expr $i : 'labpcaio\(.*\)'`
2053 all
="0 1 2 3 4 5 6 7"
2059 unit
=`expr $i : 'labpcdio\(.*\)'`
2065 die
3 "Don't know LabPC type $i"
2069 [ "${unit}" ] || unit
=all
2073 mknod
$name $unit c
66 $
(($offset + $unit)) \
2080 mknod
$name $i c
66 $
(($offset + $i)) \
2086 echo "No such LabPC unit: $unit"
2091 #-----------------------------------------------------------------------------
2094 mknod perfmon
"" c
2 32 root
:kmem
640
2097 #-----------------------------------------------------------------------------
2101 mknod ipnat
"" c
79 1
2102 mknod ipstate
"" c
79 2
2103 mknod ipauth
"" c
79 3
2106 #-----------------------------------------------------------------------------
2109 mknod elan-mmcr
"" c
100 0 root
:wheel
600
2112 #-----------------------------------------------------------------------------
2115 unit
=`expr $i : 'kbd\(.*\)'`
2118 mknod kbd
$unit c
$chr `unit2minor $unit`
2121 #-----------------------------------------------------------------------------
2128 mknod i4bctl
"" c
55 0
2132 unit
=`expr $i : 'i4brbch\(.*\)'`
2134 mknod i4brbch
$unit c
57 `unit2minor $unit`
2139 unit
=`expr $i : 'i4bteld\(.*\)'`
2141 mknod i4bteld
$unit c
56 `unit2minor $(($offset + $unit))`
2145 unit
=`expr $i : 'i4btel\(.*\)'`
2147 mknod i4btel
$unit c
56 `unit2minor $unit`
2151 unit
=`expr $i : 'i4btrc\(.*\)'`
2153 mknod i4btrc
$unit c
59 `unit2minor $unit`
2156 #-----------------------------------------------------------------------------
2159 unit
=`expr $i : 'aac\(.*\)'`
2161 mknod aac
$unit c
150 `unit2minor $unit`
2163 ln -fs aac
$unit afa
$unit
2164 ln -fs aac
$unit hpn
$unit
2167 #-----------------------------------------------------------------------------
2170 unit
=`expr $i : 'mlx\(.*\)'`
2172 mknod mlx
$unit c
130 `unit2minor $unit`
2175 #-----------------------------------------------------------------------------
2178 unit
=`expr $i : 'amr\(.*\)'`
2180 mknod amr
$unit c
132 `unit2minor $unit`
2183 #-----------------------------------------------------------------------------
2186 unit
=`expr $i : 'ips\(.*\)'`
2188 mknod mlx
$unit c
175 `unit2minor $unit`
2191 #-----------------------------------------------------------------------------
2194 unit
=`expr $i : 'ciss\(.*\)'`
2196 mknod ciss
$unit c
166 `unit2minor $unit`
2199 #-----------------------------------------------------------------------------
2202 mknod agpgart
"" c
148 0
2205 #-----------------------------------------------------------------------------
2208 unit
=`expr $i : 'twe\(.*\)'`
2210 mknod twe
$unit c
146 `unit2minor $unit`
2213 #-----------------------------------------------------------------------------
2216 unit
=`expr $i : 'tw\(.*\)'`
2218 mknod tw
$unit c
19 `unit2minor $unit` root
:operator
2221 #-----------------------------------------------------------------------------
2224 unit
=`expr $i : 'nsmb\(.*\)'`
2226 mknod nsmb
$unit c
144 $unit
2229 #-----------------------------------------------------------------------------
2232 unit
=`expr $i : 'cmx\(.*\)'`
2234 mknod cmx
$unit c
185 $unit
2236 #-----------------------------------------------------------------------------
2244 #-----------------------------------------------------------------------------
2247 echo $i - no such device name