sys/dev/drm/i915/dvo_ivch.c

   1 /*
   2  * Copyright © 2006 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *    Eric Anholt <eric@anholt.net>
  25  *
  26  */
  27
  28 #include "dvo.h"
  29
  30 /*
  31  * register definitions for the i82807aa.
  32  *
  33  * Documentation on this chipset can be found in datasheet #29069001 at
  34  * intel.com.
  35  */
  36
  37 /*
  38  * VCH Revision & GMBus Base Addr
  39  */
  40 #define VR00            0x00
  41 # define VR00_BASE_ADDRESS_MASK         0x007f
  42
  43 /*
  44  * Functionality Enable
  45  */
  46 #define VR01            0x01
  47
  48 /*
  49  * Enable the panel fitter
  50  */
  51 # define VR01_PANEL_FIT_ENABLE          (1 << 3)
  52 /*
  53  * Enables the LCD display.
  54  *
  55  * This must not be set while VR01_DVO_BYPASS_ENABLE is set.
  56  */
  57 # define VR01_LCD_ENABLE                (1 << 2)
  58 /** Enables the DVO repeater. */
  59 # define VR01_DVO_BYPASS_ENABLE         (1 << 1)
  60 /** Enables the DVO clock */
  61 # define VR01_DVO_ENABLE                (1 << 0)
  62
  63 /*
  64  * LCD Interface Format
  65  */
  66 #define VR10            0x10
  67 /** Enables LVDS output instead of CMOS */
  68 # define VR10_LVDS_ENABLE               (1 << 4)
  69 /** Enables 18-bit LVDS output. */
  70 # define VR10_INTERFACE_1X18            (0 << 2)
  71 /** Enables 24-bit LVDS or CMOS output */
  72 # define VR10_INTERFACE_1X24            (1 << 2)
  73 /** Enables 2x18-bit LVDS or CMOS output. */
  74 # define VR10_INTERFACE_2X18            (2 << 2)
  75 /** Enables 2x24-bit LVDS output */
  76 # define VR10_INTERFACE_2X24            (3 << 2)
  77
  78 /*
  79  * VR20 LCD Horizontal Display Size
  80  */
  81 #define VR20    0x20
  82
  83 /*
  84  * LCD Vertical Display Size
  85  */
  86 #define VR21    0x20
  87
  88 /*
  89  * Panel power down status
  90  */
  91 #define VR30            0x30
  92 /** Read only bit indicating that the panel is not in a safe poweroff state. */
  93 # define VR30_PANEL_ON                  (1 << 15)
  94
  95 #define VR40            0x40
  96 # define VR40_STALL_ENABLE              (1 << 13)
  97 # define VR40_VERTICAL_INTERP_ENABLE    (1 << 12)
  98 # define VR40_ENHANCED_PANEL_FITTING    (1 << 11)
  99 # define VR40_HORIZONTAL_INTERP_ENABLE  (1 << 10)
 100 # define VR40_AUTO_RATIO_ENABLE         (1 << 9)
 101 # define VR40_CLOCK_GATING_ENABLE       (1 << 8)
 102
 103 /*
 104  * Panel Fitting Vertical Ratio
 105  * (((image_height - 1) << 16) / ((panel_height - 1))) >> 2
 106  */
 107 #define VR41            0x41
 108
 109 /*
 110  * Panel Fitting Horizontal Ratio
 111  * (((image_width - 1) << 16) / ((panel_width - 1))) >> 2
 112  */
 113 #define VR42            0x42
 114
 115 /*
 116  * Horizontal Image Size
 117  */
 118 #define VR43            0x43
 119
 120 /* VR80 GPIO 0
 121  */
 122 #define VR80        0x80
 123 #define VR81        0x81
 124 #define VR82        0x82
 125 #define VR83        0x83
 126 #define VR84        0x84
 127 #define VR85        0x85
 128 #define VR86        0x86
 129 #define VR87        0x87
 130
 131 /* VR88 GPIO 8
 132  */
 133 #define VR88        0x88
 134
 135 /* Graphics BIOS scratch 0
 136  */
 137 #define VR8E        0x8E
 138 # define VR8E_PANEL_TYPE_MASK           (0xf << 0)
 139 # define VR8E_PANEL_INTERFACE_CMOS      (0 << 4)
 140 # define VR8E_PANEL_INTERFACE_LVDS      (1 << 4)
 141 # define VR8E_FORCE_DEFAULT_PANEL       (1 << 5)
 142
 143 /* Graphics BIOS scratch 1
 144  */
 145 #define VR8F        0x8F
 146 # define VR8F_VCH_PRESENT               (1 << 0)
 147 # define VR8F_DISPLAY_CONN              (1 << 1)
 148 # define VR8F_POWER_MASK                (0x3c)
 149 # define VR8F_POWER_POS                 (2)
 150
 151
 152 struct ivch_priv {
 153         bool quiet;
 154
 155         uint16_t width, height;
 156 };
 157
 158
 159 static void ivch_dump_regs(struct intel_dvo_device *dvo);
 160
 161 /**
 162  * Reads a register on the ivch.
 163  *
 164  * Each of the 256 registers are 16 bits long.
 165  */
 166 static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
 167 {
 168         struct intel_iic_softc *sc;
 169         struct ivch_priv *priv = dvo->dev_priv;
 170         struct i2c_adapter *adapter = dvo->i2c_bus;
 171         u8 out_buf[1];
 172         u8 in_buf[2];
 173
 174         struct i2c_msg msgs[] = {
 175                 {
 176                         .slave = dvo->slave_addr << 1,
 177                         .flags = I2C_M_RD,
 178                         .len = 0,
 179                 },
 180                 {
 181                         .slave = 0 << 1,
 182                         .flags = I2C_M_NOSTART,
 183                         .len = 1,
 184                         .buf = out_buf,
 185                 },
 186                 {
 187                         .slave = dvo->slave_addr << 1,
 188                         .flags = I2C_M_RD | I2C_M_NOSTART,
 189                         .len = 2,
 190                         .buf = in_buf,
 191                 }
 192         };
 193
 194         out_buf[0] = addr;
 195
 196         sc = device_get_softc(adapter);
 197
 198         if (iicbus_transfer(adapter, msgs, 3) == 0) {
 199                 *data = (in_buf[1] << 8) | in_buf[0];
 200                 return true;
 201         }
 202
 203         if (!priv->quiet) {
 204                 DRM_DEBUG_KMS("Unable to read register 0x%02x from "
 205                                 "%s:%02x.\n",
 206                           addr, sc->name, dvo->slave_addr);
 207         }
 208         return false;
 209 }
 210
 211 /** Writes a 16-bit register on the ivch */
 212 static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
 213 {
 214         struct intel_iic_softc *sc;
 215         struct ivch_priv *priv = dvo->dev_priv;
 216         struct i2c_adapter *adapter = dvo->i2c_bus;
 217         u8 out_buf[3];
 218         struct i2c_msg msg = {
 219                 .slave = dvo->slave_addr << 1,
 220                 .flags = 0,
 221                 .len = 3,
 222                 .buf = out_buf,
 223         };
 224
 225         out_buf[0] = addr;
 226         out_buf[1] = data & 0xff;
 227         out_buf[2] = data >> 8;
 228
 229         sc = device_get_softc(adapter);
 230
 231         if (iicbus_transfer(adapter, &msg, 1) == 0)
 232                 return true;
 233
 234         if (!priv->quiet) {
 235                 DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n",
 236                           addr, sc->name, dvo->slave_addr);
 237         }
 238
 239         return false;
 240 }
 241
 242 /** Probes the given bus and slave address for an ivch */
 243 static bool ivch_init(struct intel_dvo_device *dvo,
 244                       struct i2c_adapter *adapter)
 245 {
 246         struct ivch_priv *priv;
 247         uint16_t temp;
 248
 249         priv = kzalloc(sizeof(struct ivch_priv), GFP_KERNEL);
 250         if (priv == NULL)
 251                 return false;
 252
 253         dvo->i2c_bus = adapter;
 254         dvo->dev_priv = priv;
 255         priv->quiet = true;
 256
 257         if (!ivch_read(dvo, VR00, &temp))
 258                 goto out;
 259         priv->quiet = false;
 260
 261         /* Since the identification bits are probably zeroes, which doesn't seem
 262          * very unique, check that the value in the base address field matches
 263          * the address it's responding on.
 264          */
 265         if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->slave_addr) {
 266                 DRM_DEBUG_KMS("ivch detect failed due to address mismatch "
 267                           "(%d vs %d)\n",
 268                           (temp & VR00_BASE_ADDRESS_MASK), dvo->slave_addr);
 269                 goto out;
 270         }
 271
 272         ivch_read(dvo, VR20, &priv->width);
 273         ivch_read(dvo, VR21, &priv->height);
 274
 275         return true;
 276
 277 out:
 278         kfree(priv);
 279         return false;
 280 }
 281
 282 static enum drm_connector_status ivch_detect(struct intel_dvo_device *dvo)
 283 {
 284         return connector_status_connected;
 285 }
 286
 287 static enum drm_mode_status ivch_mode_valid(struct intel_dvo_device *dvo,
 288                                             struct drm_display_mode *mode)
 289 {
 290         if (mode->clock > 112000)
 291                 return MODE_CLOCK_HIGH;
 292
 293         return MODE_OK;
 294 }
 295
 296 /** Sets the power state of the panel connected to the ivch */
 297 static void ivch_dpms(struct intel_dvo_device *dvo, bool enable)
 298 {
 299         int i;
 300         uint16_t vr01, vr30, backlight;
 301
 302         /* Set the new power state of the panel. */
 303         if (!ivch_read(dvo, VR01, &vr01))
 304                 return;
 305
 306         if (enable)
 307                 backlight = 1;
 308         else
 309                 backlight = 0;
 310         ivch_write(dvo, VR80, backlight);
 311
 312         if (enable)
 313                 vr01 |= VR01_LCD_ENABLE | VR01_DVO_ENABLE;
 314         else
 315                 vr01 &= ~(VR01_LCD_ENABLE | VR01_DVO_ENABLE);
 316
 317         ivch_write(dvo, VR01, vr01);
 318
 319         /* Wait for the panel to make its state transition */
 320         for (i = 0; i < 100; i++) {
 321                 if (!ivch_read(dvo, VR30, &vr30))
 322                         break;
 323
 324                 if (((vr30 & VR30_PANEL_ON) != 0) == enable)
 325                         break;
 326                 udelay(1000);
 327         }
 328         /* wait some more; vch may fail to resync sometimes without this */
 329         udelay(16 * 1000);
 330 }
 331
 332 static bool ivch_get_hw_state(struct intel_dvo_device *dvo)
 333 {
 334         uint16_t vr01;
 335
 336         /* Set the new power state of the panel. */
 337         if (!ivch_read(dvo, VR01, &vr01))
 338                 return false;
 339
 340         if (vr01 & VR01_LCD_ENABLE)
 341                 return true;
 342         else
 343                 return false;
 344 }
 345
 346 static void ivch_mode_set(struct intel_dvo_device *dvo,
 347                           struct drm_display_mode *mode,
 348                           struct drm_display_mode *adjusted_mode)
 349 {
 350         uint16_t vr40 = 0;
 351         uint16_t vr01;
 352
 353         vr01 = 0;
 354         vr40 = (VR40_STALL_ENABLE | VR40_VERTICAL_INTERP_ENABLE |
 355                 VR40_HORIZONTAL_INTERP_ENABLE);
 356
 357         if (mode->hdisplay != adjusted_mode->hdisplay ||
 358             mode->vdisplay != adjusted_mode->vdisplay) {
 359                 uint16_t x_ratio, y_ratio;
 360
 361                 vr01 |= VR01_PANEL_FIT_ENABLE;
 362                 vr40 |= VR40_CLOCK_GATING_ENABLE;
 363                 x_ratio = (((mode->hdisplay - 1) << 16) /
 364                            (adjusted_mode->hdisplay - 1)) >> 2;
 365                 y_ratio = (((mode->vdisplay - 1) << 16) /
 366                            (adjusted_mode->vdisplay - 1)) >> 2;
 367                 ivch_write(dvo, VR42, x_ratio);
 368                 ivch_write(dvo, VR41, y_ratio);
 369         } else {
 370                 vr01 &= ~VR01_PANEL_FIT_ENABLE;
 371                 vr40 &= ~VR40_CLOCK_GATING_ENABLE;
 372         }
 373         vr40 &= ~VR40_AUTO_RATIO_ENABLE;
 374
 375         ivch_write(dvo, VR01, vr01);
 376         ivch_write(dvo, VR40, vr40);
 377
 378         ivch_dump_regs(dvo);
 379 }
 380
 381 static void ivch_dump_regs(struct intel_dvo_device *dvo)
 382 {
 383         uint16_t val;
 384
 385         ivch_read(dvo, VR00, &val);
 386         DRM_DEBUG_KMS("VR00: 0x%04x\n", val);
 387         ivch_read(dvo, VR01, &val);
 388         DRM_DEBUG_KMS("VR01: 0x%04x\n", val);
 389         ivch_read(dvo, VR30, &val);
 390         DRM_DEBUG_KMS("VR30: 0x%04x\n", val);
 391         ivch_read(dvo, VR40, &val);
 392         DRM_DEBUG_KMS("VR40: 0x%04x\n", val);
 393
 394         /* GPIO registers */
 395         ivch_read(dvo, VR80, &val);
 396         DRM_DEBUG_KMS("VR80: 0x%04x\n", val);
 397         ivch_read(dvo, VR81, &val);
 398         DRM_DEBUG_KMS("VR81: 0x%04x\n", val);
 399         ivch_read(dvo, VR82, &val);
 400         DRM_DEBUG_KMS("VR82: 0x%04x\n", val);
 401         ivch_read(dvo, VR83, &val);
 402         DRM_DEBUG_KMS("VR83: 0x%04x\n", val);
 403         ivch_read(dvo, VR84, &val);
 404         DRM_DEBUG_KMS("VR84: 0x%04x\n", val);
 405         ivch_read(dvo, VR85, &val);
 406         DRM_DEBUG_KMS("VR85: 0x%04x\n", val);
 407         ivch_read(dvo, VR86, &val);
 408         DRM_DEBUG_KMS("VR86: 0x%04x\n", val);
 409         ivch_read(dvo, VR87, &val);
 410         DRM_DEBUG_KMS("VR87: 0x%04x\n", val);
 411         ivch_read(dvo, VR88, &val);
 412         DRM_DEBUG_KMS("VR88: 0x%04x\n", val);
 413
 414         /* Scratch register 0 - AIM Panel type */
 415         ivch_read(dvo, VR8E, &val);
 416         DRM_DEBUG_KMS("VR8E: 0x%04x\n", val);
 417
 418         /* Scratch register 1 - Status register */
 419         ivch_read(dvo, VR8F, &val);
 420         DRM_DEBUG_KMS("VR8F: 0x%04x\n", val);
 421 }
 422
 423 static void ivch_destroy(struct intel_dvo_device *dvo)
 424 {
 425         struct ivch_priv *priv = dvo->dev_priv;
 426
 427         if (priv) {
 428                 kfree(priv);
 429                 dvo->dev_priv = NULL;
 430         }
 431 }
 432
 433 struct intel_dvo_dev_ops ivch_ops = {
 434         .init = ivch_init,
 435         .dpms = ivch_dpms,
 436         .get_hw_state = ivch_get_hw_state,
 437         .mode_valid = ivch_mode_valid,
 438         .mode_set = ivch_mode_set,
 439         .detect = ivch_detect,
 440         .dump_regs = ivch_dump_regs,
 441         .destroy = ivch_destroy,
 442 };