2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
4 # Build-time options are documented in make.conf(5).
6 # The intended user-driven targets are:
8 # buildworld - rebuild *everything*, including glue to help do upgrades
9 # quickworld - skip the glue and do a depend+build on the meat
10 # realquickworld - skip the glue and depend stages and just build the meat
11 # crossworld - only build the glue (particularly the cross-build environment)
12 # installworld- install everything built by "buildworld"
13 # backupworld - copies /bin /sbin /usr/bin /usr/sbin /usr/lib /usr/libexec
14 # to manual backup dir
15 # restoreworld- installs binaries from manual backup dir to world
16 # restoreworld-auto - installs binaries from auto-backup dir to world
17 # most - build user commands, no libraries or include files
18 # installmost - install user commands, no libraries or include files
19 # backup-clean - delete backup from manual backup dir
20 # backup-auto-clean - delete backup from auto-backup dir
22 # Standard targets (not defined here) are documented in the makefiles in
23 # /usr/share/mk. These include:
24 # obj depend all install clean cleandepend cleanobj
26 # Put initial settings here.
29 # /libexec/ld-elf.so.2 needs to be installed first
30 # Otherwise, install(1) beeing a dynamically linked binary will fail
31 # during the first upgrade from a static to a dynamic world
32 .if exists(${.CURDIR}/libexec)
36 # We must do share/info early so that installation of info `dir'
37 # entries works correctly. Do it first since it is less likely to
38 # grow dependencies on include and lib than vice versa.
39 .if exists(${.CURDIR}/share/info)
43 # We must do include and lib early so that the perl *.ph generation
44 # works correctly as it uses the header files installed by this.
45 .if exists(${.CURDIR}/include)
48 .if exists(${.CURDIR}/lib)
51 # This exists simply to ensure that the obj dir hierarchy is
52 # intact for nrelease, allowing the nrelease Makefile's to
53 # reference ${.OBJDIR}.
55 .if exists(${.CURDIR}/nrelease)
59 .if exists(${.CURDIR}/bin)
62 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
65 .if exists(${.CURDIR}/gnu)
68 .if exists(${.CURDIR}/sbin)
71 .if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
74 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
77 .if exists(${.CURDIR}/sys)
80 .if exists(${.CURDIR}/usr.bin)
83 .if exists(${.CURDIR}/usr.sbin)
87 .if exists(${.CURDIR}/etc)
91 # These are last, since it is nice to at least get the base system
92 # rebuilt before you do them.
93 .if defined(LOCAL_DIRS)
94 .for _DIR in ${LOCAL_DIRS}
95 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
101 .if defined(SUBDIR_OVERRIDE)
102 SUBDIR= ${SUBDIR_OVERRIDE}
105 .if defined(NOCLEANDIR)
106 CLEANDIR= clean cleandepend
111 .if defined(NO_CLEAN)
115 # Object directory base in primary make. Note that when we rerun make
116 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
117 # subdirectory because the rest of the build system needs it that way.
118 # The original object directory base is saved in OBJTREE.
120 MAKEOBJDIRPREFIX?= /usr/obj
121 OBJTREE?= ${MAKEOBJDIRPREFIX}
123 # Used for stage installs and pathing
125 DESTDIRBASE:= ${OBJTREE}${.CURDIR}
127 # Remove DESTDIR from MAKEFLAGS. It is present in the environment
128 # anyhow, and we need to be able to override it for stage installs
129 .MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
131 # This section sets the tools used to build the world/kernel
134 WORLD_BINUTILSVER?= binutils224
136 # Set the backup parameters if they are not already defined
138 WORLD_BACKUP?= /var/backups/world_backup
139 AUTO_BACKUP?= ${OBJTREE}/world_backup/${DESTDIR}
141 TARGET_ARCH?= ${MACHINE_ARCH}
142 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
145 TARGET?= ${TARGET_ARCH}
148 BUILD_ARCH!= sysctl -n hw.machine_arch
150 # temporary until everybody has converted to x86_64
151 .if ${BUILD_ARCH} == "amd64"
155 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
156 .error To cross-build, set TARGET_ARCH.
160 # Backwards compatibility with older make's or older sys.mk's. make
161 # is expected to define MACHINE_PLATFORM.
163 .if !defined(MACHINE_PLATFORM)
164 MACHINE_PLATFORM= pc32
167 # XXX this is ugly and we need to come up with a nicer solution
168 .if !defined(TARGET_PLATFORM)
169 .if ${TARGET_ARCH} == "i386"
170 TARGET_PLATFORM= pc32
171 .elif ${TARGET_ARCH} == "x86_64"
172 TARGET_PLATFORM= pc64
174 .error Unknown target architecture.
178 THREAD_LIB?= thread_xu
179 .if ${THREAD_LIB} == "c_r"
180 .if defined(NO_LIBC_R)
181 .error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
185 # BTOOLS (Natively built) All non-cross-development tools that the
186 # main build needs. This includes things like 'mkdir' and 'rm'.
187 # We will not use the native system's exec path once we start
188 # on WORLD. (bootstrap-tools and build-tools or BTOOLS)
190 # CTOOLS (Natively built) Cross development tools which are specific
191 # to the target architecture.
193 # WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
196 # MACHINE_PLATFORM Platform Architecture we are building on
197 # MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
198 # MACHINE_ARCH Cpu Architecture we are building on
200 # TARGET_PLATFORM Platform Architecture we are building for
201 # TARGET Machine Architecture we are building for
202 # TARGET_ARCH Cpu Architecture we are building for
204 BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
205 CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
206 WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
208 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
209 # cross-tools stages to augment the existing command path to access newer
210 # versions of certain utilities such as 'patch' that the cross-tools stage
213 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
215 # The strict temporary command path contains all binaries required
216 # by the buildworld system after the cross-tools stage.
218 STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/local/bin:/usr/pkg/bin
224 # Building a world goes through the following stages
226 # 1. bootstrap-tool stage [BMAKE]
227 # This stage is responsible for creating programs that
228 # are needed for backward compatibility reasons. They
229 # are not built as cross-tools.
230 # 2. build-tool stage [TMAKE]
231 # This stage is responsible for creating the object
232 # tree and building any tools that are needed during
234 # 3. cross-tool stage [XMAKE]
235 # This stage is responsible for creating any tools that
236 # are needed for cross-builds. A cross-compiler is one
238 # 4. world stage [WMAKE]
239 # This stage actually builds the world.
240 # 5. install stage (optional) [IMAKE]
241 # This stage installs a previously built world.
243 # In all cases we must carefully adjust the environment so the proper
244 # tools and header files are used.
246 # NOTE: The M4 environment variable is used by the [f]lex binary to
247 # override the location of the 'm4' binary. The override is
248 # needed for certain buildworld version transitions, specifically
249 # past a certain point in 3.3 because the older /usr/bin/m4 will
250 # generate output that will blow up the newer [f]lex/yacc/bison
254 # bootstrap-tool stage
256 BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
258 DESTDIR=${BTOOLSDEST} \
259 PATH=${BTOOLSPATH}:${PATH} \
260 M4=${BTOOLSDEST}/usr/bin/m4 \
261 INSTALL="sh ${.CURDIR}/tools/install.sh"
263 BMAKE= ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
264 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
269 TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
272 PATH=${BTOOLSPATH}:${PATH} \
273 M4=${BTOOLSDEST}/usr/bin/m4 \
274 INSTALL="sh ${.CURDIR}/tools/install.sh"
276 TMAKE= ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
277 -DNO_FORTRAN -DNOSHARED
281 # note: TOOLS_PREFIX points to the obj root holding the cross
282 # compiler binaries, while USRDATA_PREFIX points to the obj root
283 # holding the target environment (and also determines where cross-built
284 # libraries, crt*.o, and include files are installed).
286 XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
288 DESTDIR=${CTOOLSDEST} \
289 _SHLIBDIRPREFIX=${CTOOLSDEST} \
290 INSTALL="sh ${.CURDIR}/tools/install.sh" \
291 TOOLS_PREFIX=${CTOOLSDEST} \
292 USRDATA_PREFIX=${WORLDDEST} \
293 M4=${BTOOLSDEST}/usr/bin/m4 \
294 PATH=${BTOOLSPATH}:${PATH}
296 XMAKE= ${XMAKEENV} make -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
297 -DBOOTSTRAPPING -DNOSHARED
299 # world stage, note the strict path and note that TOOLS_PREFIX is left
300 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
301 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
302 # for both binary and library paths, even though it is being compiled to
303 # WORLDDEST. None of the programs in the world stage are ever actually
304 # executed during the buildworld/installworld.
306 CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
308 MACHINE_ARCH=${TARGET_ARCH} \
310 MACHINE_PLATFORM=${TARGET_PLATFORM} \
311 OBJFORMAT_PATH=${CTOOLSDEST} \
312 HOST_CCVER=${HOST_CCVER} \
313 CCVER=${WORLD_CCVER} \
314 LDVER=${WORLD_LDVER} \
315 BINUTILSVER=${WORLD_BINUTILSVER}
317 WMAKEENV= ${CROSSENV} \
318 DESTDIR=${WORLDDEST} \
319 _SHLIBDIRPREFIX=${WORLDDEST} \
320 INSTALL="sh ${.CURDIR}/tools/install.sh" \
321 M4=${BTOOLSDEST}/usr/bin/m4 \
322 PATH=${STRICTTMPPATH}
324 WMAKE= ${WMAKEENV} make -f Makefile.inc1
328 IMAKEENV= ${CROSSENV} \
329 PATH=${STRICTTMPPATH}
330 IMAKE= ${IMAKEENV} make -f Makefile.inc1
334 KMAKEENV= ${WMAKEENV}
338 # Attempt to rebuild the entire system, with reasonable chance of
339 # success, regardless of how old your existing system is.
341 _worldtmp: _cleantmp _mtreetmp
342 .ORDER: _cleantmp _mtreetmp
346 @echo "--------------------------------------------------------------"
347 @echo ">>> Rebuilding the temporary build tree"
348 @echo "--------------------------------------------------------------"
349 .if !defined(NOCLEAN)
350 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
352 # XXX - These two can depend on any header file.
353 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
354 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
358 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
359 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
360 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
361 -p ${_dir}/ > /dev/null
362 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
363 -p ${_dir}/usr > /dev/null
365 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
366 -p ${WORLDDEST}/usr/include > /dev/null
367 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
371 @echo "--------------------------------------------------------------"
372 @echo ">>> stage 1: bootstrap tools"
373 @echo "--------------------------------------------------------------"
374 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
377 @echo "--------------------------------------------------------------"
378 @echo ">>> stage 2a: cleaning up the object tree"
379 @echo "--------------------------------------------------------------"
380 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
383 @echo "--------------------------------------------------------------"
384 @echo ">>> stage 2b: rebuilding the object tree"
385 @echo "--------------------------------------------------------------"
386 cd ${.CURDIR}; ${WMAKE} par-obj
389 @echo "--------------------------------------------------------------"
390 @echo ">>> stage 2c: build tools"
391 @echo "--------------------------------------------------------------"
392 cd ${.CURDIR}; ${TMAKE} build-tools
395 @echo "--------------------------------------------------------------"
396 @echo ">>> stage 3: cross tools"
397 @echo "--------------------------------------------------------------"
398 cd ${.CURDIR}; ${XMAKE} cross-tools
401 @echo "--------------------------------------------------------------"
402 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
403 @echo "--------------------------------------------------------------"
404 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
407 @echo "--------------------------------------------------------------"
408 @echo ">>> stage 4b: building libraries"
409 @echo "--------------------------------------------------------------"
410 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
413 @echo "--------------------------------------------------------------"
414 @echo ">>> stage 4c: make dependencies"
415 @echo "--------------------------------------------------------------"
416 cd ${.CURDIR}; ${WMAKE} par-depend
419 @echo "--------------------------------------------------------------"
420 @echo ">>> stage 4d: building everything.."
421 @echo "--------------------------------------------------------------"
422 cd ${.CURDIR}; ${WMAKE} all
424 # note: buildworld no longer depends on _cleanobj because we rm -rf the
425 # entire object tree and built the bootstrap tools in a different location.
427 # buildworld - build everything from scratch
428 # quickworld - skip the bootstrap, build, and cross-build steps
429 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
431 # note: we include _obj in realquickworld to prevent accidental creation
432 # of files in /usr/src.
435 .if !defined(SUBDIR_OVERRIDE)
436 WMAKE_TGTS+= _worldtmp _bootstrap-tools
438 WMAKE_TGTS+= _obj _build-tools
439 .if !defined(SUBDIR_OVERRIDE)
440 WMAKE_TGTS+= _cross-tools
442 WMAKE_TGTS+= _includes _libraries _depend everything
444 buildworld: ${WMAKE_TGTS}
446 quickworld: _mtreetmp _obj _includes _libraries _depend everything
448 realquickworld: _mtreetmp _obj _includes _libraries everything
450 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
452 .ORDER: ${WMAKE_TGTS}
453 .ORDER: _obj _includes
454 .ORDER: _mtreetmp _obj
455 .ORDER: installcheck backupworld-auto
460 # Checks to be sure system is ready for installworld
463 .if !defined(NO_SENDMAIL)
464 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
465 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
467 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
468 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
469 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
470 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
471 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; /usr/bin/false ; esac
477 # Backs up the current world if ${AUTO_BACKUP} is writable.
478 # Installs everything compiled by a 'buildworld'.
480 # Includes sleep/sync safety before running mkinitrd.
482 installworld: installcheck
483 -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1
485 (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \
486 ${IMAKE} backupworld-auto) || \
487 echo "Cannot write to ${AUTO_BACKUP} - world not backed up"
489 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
490 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
491 sync; sleep 2; sync; sleep 2
492 mkinitrd -b ${DESTDIR}/boot
497 # If you have a build server, you can NFS mount the source and obj directories
498 # and do a 'make reinstall' on the *client* to install new binaries from the
499 # most recent server build.
502 @echo "--------------------------------------------------------------"
503 @echo ">>> Making hierarchy"
504 @echo "--------------------------------------------------------------"
505 cd ${.CURDIR}; make -f Makefile.inc1 hierarchy
507 @echo "--------------------------------------------------------------"
508 @echo ">>> Installing everything.."
509 @echo "--------------------------------------------------------------"
510 cd ${.CURDIR}; make -f Makefile.inc1 install
513 # buildkernel, nativekernel, quickkernel, and installkernel
515 # Which kernels to build and/or install is specified by setting
516 # KERNCONF. If not defined a GENERIC kernel is built/installed.
517 # Only the existing (depending TARGET) config files are used
518 # for building kernels and only the first of these is designated
519 # as the one being installed.
521 # You can specify INSTALLSTRIPPED=1 if you wish the installed
522 # kernel and modules to be stripped of its debug info (required
523 # symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
524 # if you only want to strip the modules of their debug info. These
525 # only apply if you have DEBUG=-g in your kernel config or make line.
527 # Note that we have to use TARGET instead of TARGET_ARCH when
528 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
529 # be set to cross-build, we have to make sure TARGET is set
532 .if !defined(KERNCONF) && defined(KERNEL)
536 # XXX makeshift fix to build the right kernel for the (target) architecture
537 # We should configure this in the platform files somehow
538 .if ${TARGET_ARCH} == "i386"
541 KERNCONF?= X86_64_GENERIC
544 INSTKERNNAME?= kernel
546 KRNLSRCDIR= ${.CURDIR}/sys
547 KRNLCONFDIR= ${KRNLSRCDIR}/config
548 KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
549 KERNCONFDIR?= ${KRNLCONFDIR}
553 .for _kernel in ${KERNCONF}
554 .if exists(${KERNCONFDIR}/${_kernel})
555 BUILDKERNELS+= ${_kernel}
556 .if empty(INSTALLKERNEL)
557 INSTALLKERNEL= ${_kernel}
562 # kernel version numbers survive rm -rf
564 .for _kernel in ${BUILDKERNELS}
565 .if exists(${KRNLOBJDIR}/${_kernel}/version)
566 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
573 # Builds all kernels defined by BUILDKERNELS.
576 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
577 echo "You must buildworld before buildkernel. If you wish"; \
578 echo "to build a kernel using native tools, config it manually"; \
579 echo "or use the nativekernel target if you are in a rush"; \
584 .for _kernel in ${BUILDKERNELS}
585 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
586 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
587 echo "The kernel was build using buildworld tools which no" ; \
588 echo "longer appear to exist, quickkernel failed!" ; \
595 .if empty(BUILDKERNELS)
596 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
597 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
602 .if defined(KERNWARN)
603 @echo "--------------------------------------------------------------"
604 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
605 @echo "--------------------------------------------------------------"
610 # The buildkernel target rebuilds the specified kernels from scratch
611 # using the crossbuild tools generated by the last buildworld. It is
612 # the safest (but also the most time consuming) way to build a new kernel.
614 buildkernel: bk_tools bk_build_list bk_kernwarn
615 .for _kernel in ${BUILDKERNELS}
616 @echo "--------------------------------------------------------------"
617 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
618 @echo "--------------------------------------------------------------"
619 @echo "===> ${_kernel}"
620 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
621 rm -rf ${KRNLOBJDIR}/${_kernel}
623 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
624 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
625 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
627 mkdir -p ${KRNLOBJDIR}
628 .if !defined(NO_KERNELCONFIG)
630 PATH=${STRICTTMPPATH} \
631 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
632 ${KERNCONFDIR}/${_kernel}
634 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
635 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
637 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
638 .if !defined(NO_KERNELDEPEND)
639 cd ${KRNLOBJDIR}/${_kernel}; \
640 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
642 cd ${KRNLOBJDIR}/${_kernel}; \
643 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
644 @echo "--------------------------------------------------------------"
645 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
646 @echo "--------------------------------------------------------------"
649 # The nativekernel target rebuilds the specified kernels from scratch
650 # using the system's standard compiler rather than using the crossbuild
651 # tools generated by the last buildworld. This is fairly safe if your
652 # system is reasonable up-to-date.
654 nativekernel: bk_build_list bk_kernwarn
655 .for _kernel in ${BUILDKERNELS}
656 @echo "--------------------------------------------------------------"
657 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
658 @echo "--------------------------------------------------------------"
659 @echo "===> ${_kernel}"
660 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
661 rm -rf ${KRNLOBJDIR}/${_kernel}
663 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
664 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
665 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
667 mkdir -p ${KRNLOBJDIR}
668 .if !defined(NO_KERNELCONFIG)
670 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
671 ${KERNCONFDIR}/${_kernel}
673 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
674 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
676 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
677 cd ${KRNLOBJDIR}/${_kernel}; \
678 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
679 make -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
680 .if !defined(NO_KERNELDEPEND)
681 cd ${KRNLOBJDIR}/${_kernel}; \
682 make KERNEL=${INSTKERNNAME} depend
684 cd ${KRNLOBJDIR}/${_kernel}; \
685 make KERNEL=${INSTKERNNAME} all
686 @echo "--------------------------------------------------------------"
687 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
688 @echo "--------------------------------------------------------------"
691 # The quickkernel target rebuilds the specified kernels as quickly
692 # as possible. It will use the native tools or the buildworld cross tools
693 # based on whether the kernel was originally generated via buildkernel or
694 # nativekernel. Config is rerun but the object hierarchy is not rebuilt,
695 # nor is the make depend step run.
697 quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
698 .for _kernel in ${BUILDKERNELS}
699 @echo "--------------------------------------------------------------"
700 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
701 @echo "--------------------------------------------------------------"
702 @echo "===> ${_kernel}"
703 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
704 .if !defined(NO_KERNELCONFIG)
706 PATH=${STRICTTMPPATH} \
707 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
708 ${KERNCONFDIR}/${_kernel}
710 cd ${KRNLOBJDIR}/${_kernel}; \
711 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
713 .if !defined(NO_KERNELCONFIG)
715 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
716 ${KERNCONFDIR}/${_kernel}
718 cd ${KRNLOBJDIR}/${_kernel}; \
719 make KERNEL=${INSTKERNNAME} all
721 @echo "--------------------------------------------------------------"
722 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
723 @echo "--------------------------------------------------------------"
729 # Install the kernel defined by INSTALLKERNEL
731 installkernel reinstallkernel:
732 @echo "--------------------------------------------------------------"
733 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
734 @echo "--------------------------------------------------------------"
735 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
736 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
737 ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
739 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
740 make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
746 # Build most of the user binaries on the existing system libs and includes.
749 @echo "--------------------------------------------------------------"
750 @echo ">>> Building programs only"
751 @echo "--------------------------------------------------------------"
752 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
753 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ all
759 # Install the binaries built by the 'most' target. This does not include
760 # libraries or include files.
763 @echo "--------------------------------------------------------------"
764 @echo ">>> Installing programs only"
765 @echo "--------------------------------------------------------------"
766 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
767 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ install
771 # ------------------------------------------------------------------------
773 # From here onwards are utility targets used by the 'make world' and
774 # related targets. If your 'world' breaks, you may like to try to fix
775 # the problem and manually run the following targets to attempt to
776 # complete the build. Beware, this is *not* guaranteed to work, you
777 # need to have a pretty good grip on the current state of the system
778 # to attempt to manually finish it. If in doubt, 'make world' again.
781 # bootstrap-tools: Build all tools required to build all tools. Note that
782 # order is important in a number of cases and also note that the bootstrap
783 # and build tools stages have access to earlier binaries they themselves
786 # patch: older patch's do not have -i. This program must be built
787 # first so other bootstrap tools that need to apply patches
789 # [x]install: dependancies on various new install features
790 # rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
791 # envs are not compatible with older objformat binaries.
793 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
794 _strfile= games/fortune/strfile
797 # BSTRAPDIRS1 - must be built in strict order, no parallelism
799 # order is very important. yacc before m4 before flex. flex exec's m4,
800 # m4's parser file needs the latest byacc (insanity!).
802 BSTRAPDIRS1= ${_strfile} \
804 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
805 bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
806 bin/hostname bin/kill \
807 usr.bin/yacc usr.bin/m4 usr.bin/colldef \
808 usr.bin/uudecode usr.bin/xinstall \
809 usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
810 usr.bin/find usr.bin/flex
812 # BSTRAPDIRS2 - may built in parallel
815 usr.bin/sed usr.bin/uname usr.bin/touch \
816 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
817 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
818 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
819 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
820 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
821 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
822 usr.bin/tail usr.bin/unifdef usr.bin/tic \
823 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
824 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
825 gnu/usr.bin/texinfo gnu/usr.bin/grep usr.bin/sort \
826 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb \
829 bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
830 touch ${BTOOLSDEST}/.bootstrap_done
832 bootstrap-tools-before:
833 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
835 bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/}
837 bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/}
839 .ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
841 .ORDER: ${BSTRAPDIRS1:S/^/bstrap-/}
843 .for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2}
845 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
846 cd ${.CURDIR}/${_tool}; \
847 make DIRPRFX=${_tool}/ obj; \
848 make DIRPRFX=${_tool}/ depend; \
849 make DIRPRFX=${_tool}/ all; \
850 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
853 # build-tools: Build special purpose build tools.
855 # XXX we may be able to remove or consolidate this into bootstrap-tools
856 # now that we have the native helper (.nx/.no) infrastructure.
858 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
859 _share= share/syscons/scrnmaps
862 _gcc_common_cross= gnu/usr.bin/gmp gnu/usr.bin/mpfr
863 .if !defined(NO_GCC44)
864 _gcc44_cross= gnu/usr.bin/cc44
865 _gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
867 _gcc47_cross= lib/libz gnu/usr.bin/mpc gnu/usr.bin/cc47
868 _gcc47_tools= gnu/usr.bin/cc47/cc_prep gnu/usr.bin/cc47/cc_tools
869 _custom_cross= libexec/customcc
870 _binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
872 BTOOLSDIRS= ${_gcc44_tools} ${_gcc47_tools} ${_share}
874 build-tools: build-tools-targets
875 touch ${BTOOLSDEST}/.build_done
877 build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
879 .ORDER: ${_gcc44_tools:S/^/btools-/}
880 .ORDER: ${_gcc47_tools:S/^/btools-/}
882 .for _tool in ${BTOOLSDIRS}
884 ${ECHODIR} "===> ${_tool} (build-tools)"; \
885 cd ${.CURDIR}/${_tool}; \
886 make DIRPRFX=${_tool}/ obj; \
887 make DIRPRFX=${_tool}/ depend; \
888 make DIRPRFX=${_tool}/ all; \
889 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
893 # cross-tools: Build cross-building tools
895 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
896 _btxld= usr.sbin/btxld
899 CTOOLSDIRS= ${_btxld} ${_binutils} \
900 usr.bin/objformat usr.bin/crunch/crunchide \
901 ${_gcc_common_cross} \
902 ${_gcc44_cross} ${_gcc47_cross} ${_custom_cross}
904 cross-tools: cross-tools-targets
905 touch ${CTOOLSDEST}/.cross_done
907 cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
909 .for _tool in ${CTOOLSDIRS}
911 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
912 cd ${.CURDIR}/${_tool}; \
913 make DIRPRFX=${_tool}/ obj; \
914 make DIRPRFX=${_tool}/ depend; \
915 make DIRPRFX=${_tool}/ all; \
916 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
920 # hierarchy - ensure that all the needed directories are present
923 cd ${.CURDIR}/etc; make distrib-dirs
926 # libraries - build all libraries, and install them under ${DESTDIR}.
928 # The list of libraries with dependents (${_prebuild_libs}) and their
929 # interdependencies (__L) are built automatically by the
930 # ${.CURDIR}/tools/make_libdeps.sh script.
932 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
933 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
937 HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
938 make -f Makefile.inc1 _startup_libs47;
939 .if !defined(NO_GCC44)
941 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
942 make -f Makefile.inc1 _startup_libs44;
945 make -f Makefile.inc1 _startup_libs; \
946 make -f Makefile.inc1 _prebuild_libs; \
947 make -f Makefile.inc1 _generic_libs;
948 touch ${WORLDDEST}/.libraries_done
950 # These dependencies are not automatically generated:
952 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
953 # shared libraries for ELF. The target for _startup_libsXX is
954 # specifically built using gccXX.
956 _startup_libs47= gnu/usr.bin/cc47/cc_prep \
957 gnu/usr.bin/cc47/cc_tools \
959 gnu/lib/gcc47/libgcc \
960 gnu/lib/gcc47/libgcc_eh \
961 gnu/lib/gcc47/libgcc_pic
962 _startup_libs44= gnu/usr.bin/cc44/cc_prep \
963 gnu/usr.bin/cc44/cc_tools \
966 _startup_libs= lib/csu lib/libc lib/libc_rtld
968 _prebuild_libs= lib/libbz2 lib/liblzma lib/libz
969 _prebuild_libs+= lib/libutil
971 _generic_libs= gnu/lib
973 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
974 lib/libncurses/libncurses lib/libopie
976 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
980 .if !defined(NO_CRYPT)
981 .if !defined(NO_OPENSSL)
982 _prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
983 .if !defined(NO_OPENSSH)
984 _prebuild_libs+= secure/lib/libssh
985 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
988 _generic_libs+= secure/lib
991 _prebuild_libs+= lib/libradius lib/libsbuf lib/libtacplus lib/libm \
992 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
993 lib/libpthread lib/libprop lib/libdevattr
995 _generic_libs+= usr.bin/flex/lib
997 .for _lib in ${_startup_libs44} ${_startup_libs47} \
998 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
1000 .if exists(${.CURDIR}/${_lib})
1001 ${ECHODIR} "===> ${_lib}"; \
1002 cd ${.CURDIR}/${_lib}; \
1003 make DIRPRFX=${_lib}/ depend; \
1004 make DIRPRFX=${_lib}/ all; \
1005 make DIRPRFX=${_lib}/ install
1009 _startup_libs: ${_startup_libs:S/$/__L/}
1010 _startup_libs47: ${_startup_libs47:S/$/__L/}
1011 _startup_libs44: ${_startup_libs44:S/$/__L/}
1012 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
1013 _generic_libs: ${_generic_libs:S/$/__L/}
1015 # library targets must be ordered because there are inter-library
1016 # races (e.g. generation of tconfig.h)
1018 .ORDER: ${_startup_libs47:S/$/__L/}
1019 .ORDER: ${_startup_libs44:S/$/__L/}
1020 .ORDER: ${_startup_libs:S/$/__L/}
1021 .ORDER: ${_prebuild_libs:S/$/__L/}
1022 .ORDER: ${_generic_libs:S/$/__L/}
1024 .for __target in clean cleandepend cleandir obj depend includes
1025 .for entry in ${SUBDIR}
1026 ${entry}.${__target}__D: .PHONY
1027 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1028 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1029 edir=${entry}.${MACHINE_ARCH}; \
1030 cd ${.CURDIR}/$${edir}; \
1032 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1034 cd ${.CURDIR}/$${edir}; \
1036 make ${__target} DIRPRFX=${DIRPRFX}$${edir}/
1038 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1039 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
1041 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
1043 # The wmake target is used by /usr/bin/wmake to run make in a
1044 # world build environment.
1047 @echo '${WMAKEENV} make ${WMAKE_ARGS}'
1050 @echo '${WMAKEENV} /bin/sh'
1053 @echo '${BMAKEENV} make ${BMAKE_ARGS}'
1056 @echo '${BMAKEENV} /bin/sh'
1059 @echo '${TMAKEENV} make ${TMAKE_ARGS}'
1062 @echo '${TMAKEENV} /bin/sh'
1065 @echo '${XMAKEENV} make ${XMAKE_ARGS}'
1068 @echo '${XMAKEENV} /bin/sh'
1070 backupworld: backup-clean
1071 @mkdir -p ${WORLD_BACKUP}
1072 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1073 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1074 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1075 tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1076 --options gzip:compression-level=1 \
1077 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1081 .if !defined(NO_BACKUP)
1082 rm -f ${AUTO_BACKUP}/binaries.tar.gz
1083 @mkdir -p ${AUTO_BACKUP}
1084 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1085 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1086 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1087 tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1088 --options gzip:compression-level=1 \
1089 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1094 rm -f ${AUTO_BACKUP}/binaries.tar.gz
1097 rm -f ${WORLD_BACKUP}/binaries.tar.gz
1100 .if !exists(${WORLD_BACKUP}/binaries.tar.gz)
1101 @echo "There does not seem to be a valid archive present."
1103 @echo "Restoring system binaries from manual backup archive..."
1104 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1105 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1106 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1107 tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1111 .if !exists(${AUTO_BACKUP}/binaries.tar.gz)
1112 @echo "There does not seem to be a valid archive present."
1114 @echo "Restoring system binaries from auto-backup archive..."
1115 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1116 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1117 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1118 tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1121 # Take advantage of bmake error response
1123 MAKE_PRINT_VAR_ON_ERROR= \
1134 .include <bsd.subdir.mk>