inet6: Restore mbuf hash after defragmentation.
[dragonfly.git] / bin / dd / dd.c
blob1ba168fb9e663bddb437a17718bd2317f006d0f8
1 /*-
2 * Copyright (c) 1991, 1993, 1994
3 * The Regents of the University of California. All rights reserved.
5 * This code is derived from software contributed to Berkeley by
6 * Keith Muller of the University of California, San Diego and Lance
7 * Visser of Convex Computer Corporation.
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. Neither the name of the University nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
33 * @(#) Copyright (c) 1991, 1993, 1994 The Regents of the University of California. All rights reserved.
34 * @(#)dd.c 8.5 (Berkeley) 4/2/94
35 * $FreeBSD: src/bin/dd/dd.c,v 1.27.2.3 2001/08/01 01:37:35 obrien Exp $
38 #include <sys/param.h>
39 #include <sys/stat.h>
40 #include <sys/conf.h>
41 #include <sys/device.h>
42 #include <sys/filio.h>
43 #include <sys/time.h>
45 #include <ctype.h>
46 #include <err.h>
47 #include <errno.h>
48 #include <fcntl.h>
49 #include <locale.h>
50 #include <stdio.h>
51 #include <stdlib.h>
52 #include <string.h>
53 #include <unistd.h>
55 #include "dd.h"
56 #include "extern.h"
58 static void dd_close (void);
59 static void dd_in (void);
60 static void getfdtype (IO *);
61 static void setup (void);
63 IO in, out; /* input/output state */
64 STAT st; /* statistics */
65 void (*cfunc) (void); /* conversion function */
66 quad_t cpy_cnt; /* # of blocks to copy */
67 off_t pending = 0; /* pending seek if sparse */
68 u_int ddflags; /* conversion options */
69 size_t cbsz; /* conversion block size */
70 quad_t files_cnt = 1; /* # of files to copy */
71 const u_char *ctab; /* conversion table */
73 int
74 main(int argc __unused, char **argv)
76 setlocale(LC_CTYPE, "");
77 jcl(argv);
78 setup();
80 signal(SIGINFO, summaryx);
81 signal(SIGINT, terminate);
83 atexit(summary);
85 while (files_cnt--)
86 dd_in();
88 dd_close();
89 exit(0);
92 static void
93 setup(void)
95 u_int cnt;
96 struct timeval tv;
98 if (in.name == NULL) {
99 in.name = "stdin";
100 in.fd = STDIN_FILENO;
101 } else {
102 in.fd = open(in.name, O_RDONLY, 0);
103 if (in.fd == -1)
104 err(1, "%s", in.name);
107 getfdtype(&in);
109 if (files_cnt > 1 && !(in.flags & ISTAPE))
110 errx(1, "files is not supported for non-tape devices");
112 if (out.name == NULL) {
113 /* No way to check for read access here. */
114 out.fd = STDOUT_FILENO;
115 out.name = "stdout";
116 } else {
117 #define OFLAGS \
118 (O_CREAT | (ddflags & (C_SEEK | C_NOTRUNC) ? 0 : O_TRUNC))
119 out.fd = open(out.name, O_RDWR | OFLAGS, DEFFILEMODE);
121 * May not have read access, so try again with write only.
122 * Without read we may have a problem if output also does
123 * not support seeks.
125 if (out.fd == -1) {
126 out.fd = open(out.name, O_WRONLY | OFLAGS, DEFFILEMODE);
127 out.flags |= NOREAD;
129 if (out.fd == -1)
130 err(1, "%s", out.name);
133 getfdtype(&out);
136 * Allocate space for the input and output buffers. If not doing
137 * record oriented I/O, only need a single buffer.
139 if (!(ddflags & (C_BLOCK | C_UNBLOCK))) {
140 if ((in.db = malloc(out.dbsz + in.dbsz - 1)) == NULL)
141 err(1, "input buffer");
142 out.db = in.db;
143 } else if ((in.db = malloc(MAX(in.dbsz, cbsz) + cbsz)) == NULL ||
144 (out.db = malloc(out.dbsz + cbsz)) == NULL)
145 err(1, "output buffer");
146 in.dbp = in.db;
147 out.dbp = out.db;
149 /* Position the input/output streams. */
150 if (in.offset)
151 pos_in();
152 if (out.offset)
153 pos_out();
156 * Truncate the output file. If it fails on a type of output file
157 * that it should _not_ fail on, error out.
159 if ((ddflags & (C_OF | C_SEEK | C_NOTRUNC)) == (C_OF | C_SEEK) &&
160 out.flags & ISTRUNC)
161 if (ftruncate(out.fd, out.offset * out.dbsz) == -1)
162 err(1, "truncating %s", out.name);
165 * If converting case at the same time as another conversion, build a
166 * table that does both at once. If just converting case, use the
167 * built-in tables.
169 if (ddflags & (C_LCASE | C_UCASE)) {
170 if (ddflags & (C_ASCII | C_EBCDIC)) {
171 if (ddflags & C_LCASE) {
172 for (cnt = 0; cnt <= 0377; ++cnt)
173 casetab[cnt] = tolower(ctab[cnt]);
174 } else {
175 for (cnt = 0; cnt <= 0377; ++cnt)
176 casetab[cnt] = toupper(ctab[cnt]);
178 } else {
179 if (ddflags & C_LCASE) {
180 for (cnt = 0; cnt <= 0377; ++cnt)
181 casetab[cnt] = tolower((int)cnt);
182 } else {
183 for (cnt = 0; cnt <= 0377; ++cnt)
184 casetab[cnt] = toupper((int)cnt);
187 ctab = casetab;
190 gettimeofday(&tv, NULL);
191 st.start = tv.tv_sec + tv.tv_usec * 1e-6;
194 static void
195 getfdtype(IO *io)
197 struct stat sb;
198 int type;
200 if (fstat(io->fd, &sb) == -1)
201 err(1, "%s", io->name);
202 if (S_ISREG(sb.st_mode))
203 io->flags |= ISTRUNC;
204 if (S_ISCHR(sb.st_mode) || S_ISBLK(sb.st_mode)) {
205 if (ioctl(io->fd, FIODTYPE, &type) == -1) {
206 err(1, "%s", io->name);
207 } else {
208 if (type & D_TAPE)
209 io->flags |= ISTAPE;
210 else if (type & (D_DISK | D_MEM))
211 io->flags |= ISSEEK;
212 if (S_ISCHR(sb.st_mode) && (type & D_TAPE) == 0)
213 io->flags |= ISCHR;
215 return;
217 errno = 0;
218 if (lseek(io->fd, (off_t)0, SEEK_CUR) == -1 && errno == ESPIPE)
219 io->flags |= ISPIPE;
220 else
221 io->flags |= ISSEEK;
224 static void
225 dd_in(void)
227 ssize_t n;
229 for (;;) {
230 switch (cpy_cnt) {
231 case -1: /* count=0 was specified */
232 return;
233 case 0:
234 break;
235 default:
236 if (st.in_full + st.in_part >= (u_quad_t)cpy_cnt)
237 return;
238 break;
242 * Zero the buffer first if sync; if doing block operations,
243 * use spaces.
245 if (ddflags & C_SYNC) {
246 if (ddflags & (C_BLOCK | C_UNBLOCK))
247 memset(in.dbp, ' ', in.dbsz);
248 else
249 memset(in.dbp, 0, in.dbsz);
252 n = read(in.fd, in.dbp, in.dbsz);
253 if (n == 0) {
254 in.dbrcnt = 0;
255 return;
258 /* Read error. */
259 if (n == -1) {
261 * If noerror not specified, die. POSIX requires that
262 * the warning message be followed by an I/O display.
264 if (!(ddflags & C_NOERROR))
265 err(1, "%s", in.name);
266 warn("%s", in.name);
267 summary();
270 * If it's a seekable file descriptor, seek past the
271 * error. If your OS doesn't do the right thing for
272 * raw disks this section should be modified to re-read
273 * in sector size chunks.
275 if (in.flags & ISSEEK &&
276 lseek(in.fd, (off_t)in.dbsz, SEEK_CUR))
277 warn("%s", in.name);
279 /* If sync not specified, omit block and continue. */
280 if (!(ddflags & C_SYNC))
281 continue;
283 /* Read errors count as full blocks. */
284 in.dbcnt += in.dbrcnt = in.dbsz;
285 ++st.in_full;
287 /* Handle full input blocks. */
288 } else if ((size_t)n == in.dbsz) {
289 in.dbcnt += in.dbrcnt = n;
290 ++st.in_full;
292 /* Handle partial input blocks. */
293 } else {
294 /* If sync, use the entire block. */
295 if (ddflags & C_SYNC)
296 in.dbcnt += in.dbrcnt = in.dbsz;
297 else
298 in.dbcnt += in.dbrcnt = n;
299 ++st.in_part;
303 * POSIX states that if bs is set and no other conversions
304 * than noerror, notrunc or sync are specified, the block
305 * is output without buffering as it is read.
307 if (ddflags & C_BS) {
308 out.dbcnt = in.dbcnt;
309 dd_out(1);
310 in.dbcnt = 0;
311 continue;
314 if (ddflags & C_SWAB) {
315 if ((n = in.dbrcnt) & 1) {
316 ++st.swab;
317 --n;
319 swab(in.dbp, in.dbp, (size_t)n);
322 in.dbp += in.dbrcnt;
323 (*cfunc)();
328 * Clean up any remaining I/O and flush output. If necessary, the output file
329 * is truncated.
331 static void
332 dd_close(void)
334 if (cfunc == def)
335 def_close();
336 else if (cfunc == block)
337 block_close();
338 else if (cfunc == unblock)
339 unblock_close();
340 if (ddflags & C_OSYNC && out.dbcnt && out.dbcnt < out.dbsz) {
341 if (ddflags & (C_BLOCK | C_UNBLOCK))
342 memset(out.dbp, ' ', out.dbsz - out.dbcnt);
343 else
344 memset(out.dbp, 0, out.dbsz - out.dbcnt);
345 out.dbcnt = out.dbsz;
347 if (out.dbcnt || pending)
348 dd_out(1);
351 void
352 dd_out(int force)
354 u_char *outp;
355 size_t cnt, i, n;
356 ssize_t nw;
357 static int warned;
358 int sparse;
361 * Write one or more blocks out. The common case is writing a full
362 * output block in a single write; increment the full block stats.
363 * Otherwise, we're into partial block writes. If a partial write,
364 * and it's a character device, just warn. If a tape device, quit.
366 * The partial writes represent two cases. 1: Where the input block
367 * was less than expected so the output block was less than expected.
368 * 2: Where the input block was the right size but we were forced to
369 * write the block in multiple chunks. The original versions of dd(1)
370 * never wrote a block in more than a single write, so the latter case
371 * never happened.
373 * One special case is if we're forced to do the write -- in that case
374 * we play games with the buffer size, and it's usually a partial write.
376 outp = out.db;
377 for (n = force ? out.dbcnt : out.dbsz;; n = out.dbsz) {
378 for (cnt = n;; cnt -= nw) {
379 sparse = 0;
380 if (ddflags & C_SPARSE) {
381 sparse = 1; /* Is buffer sparse? */
382 for (i = 0; i < cnt; i++)
383 if (outp[i] != 0) {
384 sparse = 0;
385 break;
388 if (sparse && !force) {
389 pending += cnt;
390 nw = cnt;
391 } else {
392 if (pending != 0) {
393 if (force)
394 pending--;
395 if (lseek(out.fd, pending, SEEK_CUR) ==
397 err(2, "%s: seek error creating sparse file",
398 out.name);
399 if (force)
400 write(out.fd, outp, 1);
401 pending = 0;
403 if (cnt)
404 nw = write(out.fd, outp, cnt);
405 else
406 return;
409 if (nw <= 0) {
410 if (nw == 0)
411 errx(1, "%s: end of device", out.name);
412 if (errno != EINTR)
413 err(1, "%s", out.name);
414 nw = 0;
416 outp += nw;
417 st.bytes += nw;
418 if ((size_t)nw == n) {
419 if (n != out.dbsz)
420 ++st.out_part;
421 else
422 ++st.out_full;
423 break;
425 ++st.out_part;
426 if ((size_t)nw == cnt)
427 break;
428 if (out.flags & ISTAPE)
429 errx(1, "%s: short write on tape device",
430 out.name);
431 if (out.flags & ISCHR && !warned) {
432 warned = 1;
433 warnx("%s: short write on character device",
434 out.name);
437 if ((out.dbcnt -= n) < out.dbsz)
438 break;
441 /* Reassemble the output block. */
442 if (out.dbcnt)
443 memmove(out.db, out.dbp - out.dbcnt, out.dbcnt);
444 out.dbp = out.db + out.dbcnt;