2 * Copyright (c) 2004, 2005, 2006 Robin J Carey. All rights reserved.
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
7 * 1. Redistributions of source code must retain the above copyright
8 * notice, this list of conditions, and the following disclaimer,
9 * without modification, immediately at the beginning of the file.
10 * 2. The name of the author may not be used to endorse or promote products
11 * derived from this software without specific prior written permission.
13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
14 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
17 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * $DragonFly: src/sys/kern/kern_nrandom.c,v 1.7 2008/08/01 04:42:30 dillon Exp $
29 * Note: The word "entropy" is often incorrectly used to describe
30 * random data. The word "entropy" originates from the science of
31 * Physics. The correct descriptive definition would be something
32 * along the lines of "seed", "unpredictable numbers" or
33 * "unpredictable data".
35 * Note: Some /dev/[u]random implementations save "seed" between
36 * boots which represents a security hazard since an adversary
37 * could acquire this data (since it is stored in a file). If
38 * the unpredictable data used in the above routines is only
39 * generated during Kernel operation, then an adversary can only
40 * acquire that data through a Kernel security compromise and/or
41 * a cryptographic algorithm failure/cryptanalysis.
43 * Note: On FreeBSD-4.11, interrupts have to be manually enabled
44 * using the rndcontrol(8) command.
46 * --- DESIGN (FreeBSD-4.11 based) ---
48 * The rnddev module automatically initializes itself the first time
49 * it is used (client calls any public rnddev_*() interface routine).
50 * Both CSPRNGs are initially seeded from the precise nano[up]time() routines.
51 * Tests show this method produces good enough results, suitable for intended
52 * use. It is necessary for both CSPRNGs to be completely seeded, initially.
54 * After initialization and during Kernel operation the only suitable
55 * unpredictable data available is:
57 * (1) Keyboard scan-codes.
58 * (2) Nanouptime acquired by a Keyboard/Read-Event.
59 * (3) Suitable interrupt source; hard-disk/ATA-device.
61 * (X) Mouse-event (xyz-data unsuitable); NOT IMPLEMENTED.
63 * This data is added to both CSPRNGs in real-time as it happens/
64 * becomes-available. Additionally, unpredictable (?) data may be
65 * acquired from a true-random number generator if such a device is
66 * available to the system (not advisable !).
67 * Nanouptime() acquired by a Read-Event is a very important aspect of
68 * this design, since it ensures that unpredictable data is added to
69 * the CSPRNGs even if there are no other sources.
70 * The nanouptime() Kernel routine is used since time relative to
71 * boot is less adversary-known than time itself.
73 * This design has been thoroughly tested with debug logging
74 * and the output from both /dev/random and /dev/urandom has
75 * been tested with the DIEHARD test-suite; both pass.
77 * MODIFICATIONS MADE TO ORIGINAL "kern_random.c":
81 * o Changed ReadSeed() function to schedule future read-seed-events
82 * by at least one second. Previous implementation used a randomised
83 * scheduling { 0, 1, 2, 3 seconds }.
84 * o Changed SEED_NANOUP() function to use a "previous" accumulator
85 * algorithm similar to ReadSeed(). This ensures that there is no
86 * way that an adversary can tell what number is being added to the
87 * CSPRNGs, since the number added to the CSPRNGs at Event-Time is
88 * the sum of nanouptime()@Event and an unknown/secret number.
89 * o Changed rnddev_add_interrupt() function to schedule future
90 * interrupt-events by at least one second. Previous implementation
91 * had no scheduling algorithm which allowed an "interrupt storm"
92 * to occur resulting in skewed data entering into the CSPRNGs.
97 * o Some small cleanups and change all internal functions to be
99 * o Removed ReadSeed() since its functionality is already performed
100 * by another function { rnddev_add_interrupt_OR_read() } and remove
101 * the silly rndByte accumulator/feedback-thing (since multipying by
102 * rndByte could yield a value of 0).
103 * o Made IBAA/L14 public interface become static/private;
104 * Local to this file (not changed to that in the original C modules).
108 * o SEED_NANOUP() -> NANOUP_EVENT() function rename.
109 * o Make NANOUP_EVENT() handle the time-buffering directly so that all
110 * time-stamp-events use this single time-buffer (including keyboard).
111 * This removes dependancy on "time_second" Kernel variable.
112 * o Removed second-time-buffer code in rnddev_add_interrupt_OR_read (void).
113 * o Rewrote the time-buffering algorithm in NANOUP_EVENT() to use a
114 * randomised time-delay range.
118 * o Updated to (hopefully final) L15 algorithm.
122 * o Added missing (u_char *) cast in RnddevRead() function.
123 * o Changed copyright to 3-clause BSD license and cleaned up the layout
127 #include <sys/types.h>
128 #include <sys/kernel.h>
129 #include <sys/systm.h>
130 #include <sys/poll.h>
131 #include <sys/random.h>
132 #include <sys/systimer.h>
133 #include <sys/time.h>
134 #include <sys/proc.h>
135 #include <sys/lock.h>
136 #include <sys/sysctl.h>
137 #include <sys/spinlock.h>
138 #include <machine/clock.h>
140 #include <sys/thread2.h>
141 #include <sys/spinlock2.h>
144 * Portability note: The u_char/unsigned char type is used where
145 * uint8_t from <stdint.h> or u_int8_t from <sys/types.h> should really
146 * be being used. On FreeBSD, it is safe to make the assumption that these
147 * different types are equivalent (on all architectures).
148 * The FreeBSD <sys/crypto/rc4> module also makes this assumption.
151 /*------------------------------ IBAA ----------------------------------*/
153 /*-------------------------- IBAA CSPRNG -------------------------------*/
156 * NOTE: The original source code from which this source code (IBAA)
157 * was taken has no copyright/license. The algorithm has no patent
158 * and is freely/publicly available from:
160 * http://www.burtleburtle.net/bob/rand/isaac.html
164 * ^ means XOR, & means bitwise AND, a<<b means shift a by b.
165 * barrel(a) shifts a 19 bits to the left, and bits wrap around
166 * ind(x) is (x AND 255), or (x mod 256)
168 typedef u_int32_t u4
; /* unsigned four bytes, 32 bits */
171 #define SIZE (1 << ALPHA)
172 #define MASK (SIZE - 1)
173 #define ind(x) ((x) & (SIZE - 1))
174 #define barrel(a) (((a) << 19) ^ ((a) >> 13)) /* beta=32,shift=19 */
178 u4
*m
, /* Memory: array of SIZE ALPHA-bit terms */
179 u4
*r
, /* Results: the sequence, same size as m */
180 u4
*aa
, /* Accumulator: a single value */
181 u4
*bb
/* the previous result */
187 for (i
= 0; i
< SIZE
; ++i
) {
189 a
= barrel(a
) + m
[ind(i
+ (SIZE
/ 2))]; /* set a */
190 m
[i
] = y
= m
[ind(x
)] + a
+ b
; /* set m */
191 r
[i
] = b
= m
[ind(y
>> ALPHA
)] + x
; /* set r */
196 /*-------------------------- IBAA CSPRNG -------------------------------*/
199 static u4 IBAA_memory
[SIZE
];
200 static u4 IBAA_results
[SIZE
];
204 static volatile int IBAA_byte_index
;
207 static void IBAA_Init(void);
208 static void IBAA_Call(void);
209 static void IBAA_Seed(const u_int32_t val
);
210 static u_char
IBAA_Byte(void);
220 for (i
= 0; i
< SIZE
; ++i
) {
223 IBAA_aa
= IBAA_bb
= 0;
224 IBAA_byte_index
= sizeof(IBAA_results
); /* force IBAA_Call() */
228 * PRIVATE: Call IBAA to produce 256 32-bit u4 results.
233 IBAA(IBAA_memory
, IBAA_results
, &IBAA_aa
, &IBAA_bb
);
238 * Add a 32-bit u4 seed value into IBAAs memory. Mix the low 4 bits
239 * with 4 bits of PNG data to reduce the possibility of a seeding-based
243 IBAA_Seed (const u_int32_t val
)
248 iptr
= &IBAA_memory
[memIndex
& MASK
];
249 *iptr
= ((*iptr
<< 3) | (*iptr
>> 29)) + (val
^ (IBAA_Byte() & 15));
254 * Extract a byte from IBAAs 256 32-bit u4 results array.
256 * NOTE: This code is designed to prevent MP races from taking
257 * IBAA_byte_index out of bounds.
265 index
= IBAA_byte_index
;
266 if (index
== sizeof(IBAA_results
)) {
270 result
= ((u_char
*)IBAA_results
)[index
];
271 IBAA_byte_index
= index
+ 1;
275 /*------------------------------ IBAA ----------------------------------*/
278 /*------------------------------- L15 ----------------------------------*/
281 * IMPORTANT NOTE: LByteType must be exactly 8-bits in size or this software
282 * will not function correctly.
284 typedef unsigned char LByteType
;
286 #define L15_STATE_SIZE 256
288 static LByteType L15_x
, L15_y
;
289 static LByteType L15_start_x
;
290 static LByteType L15_state
[L15_STATE_SIZE
];
296 static void L15_Swap(const LByteType pos1
, const LByteType pos2
);
297 static void L15_InitState(void);
298 static void L15_KSA(const LByteType
* const key
,
299 const size_t keyLen
);
300 static void L15_Discard(const LByteType numCalls
);
305 static void L15(const LByteType
* const key
, const size_t keyLen
);
306 static LByteType
L15_Byte(void);
307 static void L15_Vector(const LByteType
* const key
,
308 const size_t keyLen
);
311 L15_Swap(const LByteType pos1
, const LByteType pos2
)
313 const LByteType save1
= L15_state
[pos1
];
315 L15_state
[pos1
] = L15_state
[pos2
];
316 L15_state
[pos2
] = save1
;
323 for (i
= 0; i
< L15_STATE_SIZE
; ++i
)
327 #define L_SCHEDULE(xx) \
329 for (i = 0; i < L15_STATE_SIZE; ++i) { \
330 L15_Swap(i, (stateIndex += (L15_state[i] + (xx)))); \
334 L15_KSA (const LByteType
* const key
, const size_t keyLen
)
337 LByteType stateIndex
= 0;
340 for (keyIndex
= 0; keyIndex
< keyLen
; ++keyIndex
) {
341 L_SCHEDULE(key
[keyIndex
]);
346 L15_Discard(const LByteType numCalls
)
349 for (i
= 0; i
< numCalls
; ++i
) {
359 L15(const LByteType
* const key
, const size_t keyLen
)
361 L15_x
= L15_start_x
= 0;
362 L15_y
= L15_STATE_SIZE
- 1;
364 L15_KSA(key
, keyLen
);
365 L15_Discard(L15_Byte());
373 L15_Swap(L15_state
[L15_x
], L15_y
);
374 z
= (L15_state
[L15_x
++] + L15_state
[L15_y
--]);
375 if (L15_x
== L15_start_x
) {
378 return (L15_state
[z
]);
382 L15_Vector (const LByteType
* const key
, const size_t keyLen
)
384 L15_KSA(key
, keyLen
);
387 /*------------------------------- L15 ----------------------------------*/
389 /************************************************************************
391 ************************************************************************
393 * By Robin J Carey and Matthew Dillon.
396 static int rand_thread_signal
= 1;
397 static void NANOUP_EVENT(void);
398 static thread_t rand_td
;
399 static struct spinlock rand_spin
;
401 static int nrandevents
;
402 SYSCTL_INT(_kern
, OID_AUTO
, nrandevents
, CTLFLAG_RD
, &nrandevents
, 0, "");
403 static int seedenable
;
404 SYSCTL_INT(_kern
, OID_AUTO
, seedenable
, CTLFLAG_RW
, &seedenable
, 0, "");
407 * Called from early boot
410 rand_initialize(void)
415 spin_init(&rand_spin
);
417 /* Initialize IBAA. */
420 /* Initialize L15. */
422 L15((const LByteType
*)&now
.tv_nsec
, sizeof(now
.tv_nsec
));
423 for (i
= 0; i
< (SIZE
/ 2); ++i
) {
425 IBAA_Seed(now
.tv_nsec
);
426 L15_Vector((const LByteType
*)&now
.tv_nsec
,
427 sizeof(now
.tv_nsec
));
429 IBAA_Seed(now
.tv_nsec
);
430 L15_Vector((const LByteType
*)&now
.tv_nsec
,
431 sizeof(now
.tv_nsec
));
435 * Warm up the generator to get rid of weak initial states.
437 for (i
= 0; i
< 10; ++i
)
445 add_keyboard_randomness(u_char scancode
)
447 spin_lock_wr(&rand_spin
);
448 L15_Vector((const LByteType
*) &scancode
, sizeof (scancode
));
449 spin_unlock_wr(&rand_spin
);
450 add_interrupt_randomness(0);
454 * Interrupt events. This is SMP safe and allowed to race.
457 add_interrupt_randomness(int intr
)
459 if (rand_thread_signal
== 0) {
460 rand_thread_signal
= 1;
461 lwkt_schedule(rand_td
);
466 * True random number source
469 add_true_randomness(int val
)
471 spin_lock_wr(&rand_spin
);
473 L15_Vector((const LByteType
*) &val
, sizeof (val
));
475 spin_unlock_wr(&rand_spin
);
479 add_buffer_randomness(const char *buf
, int bytes
)
484 if (seedenable
&& securelevel
<= 0) {
485 while (bytes
>= sizeof(int)) {
486 add_true_randomness(*(const int *)buf
);
488 bytes
-= sizeof(int);
493 * Warm up the generator to get rid of weak initial states.
495 for (i
= 0; i
< 10; ++i
)
504 * Poll (always succeeds)
507 random_poll(cdev_t dev
, int events
)
511 if (events
& (POLLIN
| POLLRDNORM
))
512 revents
|= events
& (POLLIN
| POLLRDNORM
);
513 if (events
& (POLLOUT
| POLLWRNORM
))
514 revents
|= events
& (POLLOUT
| POLLWRNORM
);
520 * Heavy weight random number generator. May return less then the
521 * requested number of bytes.
524 read_random(void *buf
, u_int nbytes
)
528 spin_lock_wr(&rand_spin
);
529 for (i
= 0; i
< nbytes
; ++i
)
530 ((u_char
*)buf
)[i
] = IBAA_Byte();
531 spin_unlock_wr(&rand_spin
);
532 add_interrupt_randomness(0);
537 * Lightweight random number generator. Must return requested number of
541 read_random_unlimited(void *buf
, u_int nbytes
)
545 spin_lock_wr(&rand_spin
);
546 for (i
= 0; i
< nbytes
; ++i
)
547 ((u_char
*)buf
)[i
] = L15_Byte();
548 spin_unlock_wr(&rand_spin
);
549 add_interrupt_randomness(0);
554 * Random number generator helper thread. This limits code overhead from
555 * high frequency events by delaying the clearing of rand_thread_signal.
559 rand_thread_loop(void *dummy
)
565 spin_lock_wr(&rand_spin
);
566 count
= (int)(L15_Byte() * hz
/ (256 * 10) + hz
/ 10);
567 spin_unlock_wr(&rand_spin
);
568 tsleep(rand_td
, 0, "rwait", count
);
570 lwkt_deschedule_self(rand_td
);
572 rand_thread_signal
= 0;
580 rand_thread_init(void)
582 lwkt_create(rand_thread_loop
, NULL
, &rand_td
, NULL
, 0, 0, "random");
585 SYSINIT(rand
, SI_SUB_HELPER_THREADS
, SI_ORDER_ANY
, rand_thread_init
, 0);
588 * Time-buffered event time-stamping. This is necessary to cutoff higher
589 * event frequencies, e.g. an interrupt occuring at 25Hz. In such cases
590 * the CPU is being chewed and the timestamps are skewed (minimal variation).
591 * Use a nano-second time-delay to limit how many times an Event can occur
592 * in one second; <= 5Hz. Note that this doesn't prevent time-stamp skewing.
593 * This implementation randmoises the time-delay between events, which adds
594 * a layer of security/unpredictability with regard to read-events (a user
597 * Note: now.tv_nsec should range [ 0 - 1000,000,000 ].
598 * Note: "ACCUM" is a security measure (result = capped-unknown + unknown),
599 * and also produces an uncapped (>=32-bit) value.
604 static struct timespec ACCUM
= { 0, 0 };
605 static struct timespec NEXT
= { 0, 0 };
609 spin_lock_wr(&rand_spin
);
610 if ((now
.tv_nsec
> NEXT
.tv_nsec
) || (now
.tv_sec
!= NEXT
.tv_sec
)) {
612 * Randomised time-delay: 200e6 - 350e6 ns; 5 - 2.86 Hz.
614 unsigned long one_mil
;
615 unsigned long timeDelay
;
617 one_mil
= 1000000UL; /* 0.001 s */
618 timeDelay
= (one_mil
* 200) +
619 (((unsigned long)ACCUM
.tv_nsec
% 151) * one_mil
);
620 NEXT
.tv_nsec
= now
.tv_nsec
+ timeDelay
;
621 NEXT
.tv_sec
= now
.tv_sec
;
622 ACCUM
.tv_nsec
+= now
.tv_nsec
;
625 * The TSC, if present, generally has an even higher
626 * resolution. Integrate a portion of it into our seed.
629 ACCUM
.tv_nsec
^= rdtsc() & 255;
631 IBAA_Seed(ACCUM
.tv_nsec
);
632 L15_Vector((const LByteType
*)&ACCUM
.tv_nsec
,
633 sizeof(ACCUM
.tv_nsec
));
636 spin_unlock_wr(&rand_spin
);