sys/dev/netif/sr/if_srregs.h

   1 /*
   2  * Copyright (c) 1995 - 2001 John Hay.
   3  * Copyright (c) 1996 SDL Communications, Inc.
   4  * All rights reserved.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions
   8  * are met:
   9  * 1. Redistributions of source code must retain the above copyright
  10  *    notice, this list of conditions and the following disclaimer.
  11  * 2. Redistributions in binary form must reproduce the above copyright
  12  *    notice, this list of conditions and the following disclaimer in the
  13  *    documentation and/or other materials provided with the distribution.
  14  * 3. Neither the name of the author nor the names of any co-contributors
  15  *    may be used to endorse or promote products derived from this software
  16  *    without specific prior written permission.
  17  *
  18  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  19  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  21  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  22  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  23  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  24  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  25  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  26  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  27  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  28  * SUCH DAMAGE.
  29  *
  30  * $FreeBSD: src/sys/dev/sr/if_srregs.h,v 1.6.2.1 2002/06/17 15:10:58 jhay Exp $
  31  * $DragonFly: src/sys/dev/netif/sr/if_srregs.h,v 1.2 2003/06/17 04:28:31 dillon Exp $
  32  */
  33 #ifndef _IF_SRREGS_H_
  34 #define _IF_SRREGS_H_
  35
  36 #define NCHAN                   2    /* A HD64570 chip have 2 channels */
  37
  38 #define SR_BUF_SIZ              512
  39 #define SR_TX_BLOCKS            2    /* Sepperate sets of tx buffers */
  40
  41 #define SR_CRD_N2               1
  42 #define SR_CRD_N2PCI            2
  43
  44 /*
  45  * RISCom/N2 ISA card.
  46  */
  47 #define SRC_IO_SIZ              0x10 /* Actually a lie. It uses a lot more. */
  48 #define SRC_WIN_SIZ             0x00004000
  49 #define SRC_WIN_MSK             (SRC_WIN_SIZ - 1)
  50 #define SRC_WIN_SHFT            14
  51
  52 #define SR_FLAGS_NCHAN_MSK      0x0000000F
  53 #define SR_FLAGS_0_CLK_MSK      0x00000030
  54 #define SR_FLAGS_0_EXT_CLK      0x00000000 /* External RX clock shared by TX */
  55 #define SR_FLAGS_0_EXT_SEP_CLK  0x00000010 /* Sepperate external clocks */
  56 #define SR_FLAGS_0_INT_CLK      0x00000020 /* Internal clock */
  57 #define SR_FLAGS_1_CLK_MSK      0x000000C0
  58 #define SR_FLAGS_1_EXT_CLK      0x00000000 /* External RX clock shared by TX */
  59 #define SR_FLAGS_1_EXT_SEP_CLK  0x00000040 /* Sepperate external clocks */
  60 #define SR_FLAGS_1_INT_CLK      0x00000080 /* Internal clock */
  61
  62 #define SR_FLAGS_CLK_SHFT       4
  63 #define SR_FLAGS_CLK_CHAN_SHFT  2
  64 #define SR_FLAGS_EXT_CLK        0x00000000 /* External RX clock shared by TX */
  65 #define SR_FLAGS_EXT_SEP_CLK    0x00000001 /* Sepperate external clocks */
  66 #define SR_FLAGS_INT_CLK        0x00000002 /* Internal clock */
  67
  68 #define SR_PCR                  0x00 /* RW, PC Control Register */
  69 #define SR_BAR                  0x02 /* RW, Base Address Register */
  70 #define SR_PSR                  0x04 /* RW, Page Scan Register */
  71 #define SR_MCR                  0x06 /* RW, Modem Control Register */
  72
  73 #define SR_PCR_SCARUN           0x01 /* !Reset */
  74 #define SR_PCR_EN_VPM           0x02 /* Running above 1M */
  75 #define SR_PCR_MEM_WIN          0x04 /* Open memory window */
  76 #define SR_PCR_ISA16            0x08 /* 16 bit ISA mode */
  77 #define SR_PCR_16M_SEL          0xF0 /* A20-A23 Addresses */
  78
  79 #define SR_PSR_PG_SEL           0x1F /* Page 0 - 31 select */
  80 #define SR_PG_MSK               0x1F
  81 #define SR_PSR_WIN_SIZ          0x60 /* Window size select */
  82 #define SR_PSR_WIN_16K          0x00
  83 #define SR_PSR_WIN_32K          0x20
  84 #define SR_PSR_WIN_64K          0x40
  85 #define SR_PSR_WIN_128K         0x60
  86 #define SR_PSR_EN_SCA_DMA       0x80 /* Enable the SCA DMA */
  87
  88 #define SR_MCR_DTR0             0x01 /* Deactivate DTR0 */
  89 #define SR_MCR_DTR1             0x02 /* Deactivate DTR1 */
  90 #define SR_MCR_DSR0             0x04 /* DSR0 Status */
  91 #define SR_MCR_DSR1             0x08 /* DSR1 Status */
  92 #define SR_MCR_TE0              0x10 /* Enable RS422 TXD */
  93 #define SR_MCR_TE1              0x20 /* Enable RS422 TXD */
  94 #define SR_MCR_ETC0             0x40 /* Enable Ext Clock out */
  95 #define SR_MCR_ETC1             0x80 /* Enable Ext Clock out */
  96
  97 /*
  98  * RISCom/N2 PCI card.
  99  */
 100 #define SR_FECR                 0x0200 /* Front End Control Register */
 101 #define SR_FECR_ETC0            0x0001 /* Enable Ext Clock out */
 102 #define SR_FECR_ETC1            0x0002 /* Enable Ext Clock out */
 103 #define SR_FECR_TE0             0x0004 /* Enable RS422 TXD */
 104 #define SR_FECR_TE1             0x0008 /* Enable RS422 TXD */
 105 #define SR_FECR_GPO0            0x0010 /* General Purpose Output */
 106 #define SR_FECR_GPO1            0x0020 /* General Purpose Output */
 107 #define SR_FECR_DTR0            0x0040 /* 0 for active, 1 for inactive */
 108 #define SR_FECR_DTR1            0x0080 /* 0 for active, 1 for inactive */
 109 #define SR_FECR_DSR0            0x0100 /* DSR0 Status */
 110 #define SR_FECR_ID0             0x0E00 /* ID of channel 0 */
 111 #define SR_FECR_DSR1            0x1000 /* DSR1 Status */
 112 #define SR_FECR_ID1             0xE000 /* ID of channel 1 */
 113
 114 #define SR_FE_ID_V35            0x00   /* V.35 Interface */
 115 #define SR_FE_ID_RS232          0x01   /* RS232 Interface */
 116 #define SR_FE_ID_TEST           0x02   /* Test Board */
 117 #define SR_FE_ID_RS422          0x03   /* RS422 Interface */
 118 #define SR_FE_ID_HSSI           0x05   /* HSSI Interface */
 119 #define SR_FE_ID_X21            0x06   /* X.21 Interface */
 120 #define SR_FE_ID_NONE           0x07   /* No card present */
 121 #define SR_FE_ID0_SHFT             9
 122 #define SR_FE_ID1_SHFT            13
 123
 124 /*
 125  * These macros are used to hide the difference between the way the
 126  * ISA N2 cards and the PCI N2 cards access the Hitachi 64570 SCA.
 127  */
 128 #define SRC_GET8(base,off)      (*hc->src_get8)(base,(u_int)&off)
 129 #define SRC_GET16(base,off)     (*hc->src_get16)(base,(u_int)&off)
 130 #define SRC_PUT8(base,off,d)    (*hc->src_put8)(base,(u_int)&off,d)
 131 #define SRC_PUT16(base,off,d)   (*hc->src_put16)(base,(u_int)&off,d)
 132
 133 /*
 134  * These macros enable/disable the DPRAM and select the correct
 135  * DPRAM page.
 136  */
 137 #define SRC_GET_WIN(addr)       ((addr >> SRC_WIN_SHFT) & SR_PG_MSK)
 138
 139 #define SRC_SET_ON(iobase)      outb(iobase+SR_PCR,                          \
 140                                         SR_PCR_MEM_WIN | inb(iobase+SR_PCR))
 141 #define SRC_SET_MEM(iobase,win) outb(iobase+SR_PSR, SRC_GET_WIN(win) |       \
 142                                         (inb(iobase+SR_PSR) & ~SR_PG_MSK))
 143 #define SRC_SET_OFF(iobase)     outb(iobase+SR_PCR,                          \
 144                                         ~SR_PCR_MEM_WIN & inb(iobase+SR_PCR))
 145
 146 /*
 147  * Define the hardware (card information) structure needed to keep
 148  * track of the device itself... There is only one per card.
 149  */
 150 struct sr_hardc {
 151         struct  sr_softc *sc;           /* software channels */
 152         int     cunit;                  /* card w/in system */
 153
 154         u_short iobase;                 /* I/O Base Address */
 155         int     cardtype;
 156         int     numports;               /* # of ports on cd */
 157         int     mempages;
 158         u_int   memsize;                /* DPRAM size: bytes */
 159         u_int   winmsk;
 160         vm_offset_t     sca_base;
 161         vm_offset_t     mem_pstart;     /* start of buffer */
 162         caddr_t mem_start;              /* start of DP RAM */
 163         caddr_t mem_end;                /* end of DP RAM */
 164         caddr_t plx_base;
 165
 166         sca_regs        *sca;           /* register array */
 167
 168         bus_space_tag_t bt;
 169         bus_space_handle_t bh;
 170         int rid_ioport;
 171         int rid_memory;
 172         int rid_plx_memory;
 173         int rid_irq;
 174         struct resource* res_ioport;    /* resource for port range */
 175         struct resource* res_memory;    /* resource for mem range */
 176         struct resource* res_plx_memory;
 177         struct resource* res_irq;       /* resource for irq range */
 178         void    *intr_cookie;
 179
 180         /*
 181          * We vectorize the following functions to allow re-use between the
 182          * ISA card's needs and those of the PCI card.
 183          */
 184         void    (*src_put8)(u_int base, u_int off, u_int val);
 185         void    (*src_put16)(u_int base, u_int off, u_int val);
 186         u_int   (*src_get8)(u_int base, u_int off);
 187         u_int   (*src_get16)(u_int base, u_int off);
 188 };
 189
 190 extern devclass_t sr_devclass;
 191
 192 int sr_allocate_ioport(device_t device, int rid, u_long size);
 193 int sr_allocate_irq(device_t device, int rid, u_long size);
 194 int sr_allocate_memory(device_t device, int rid, u_long size);
 195 int sr_allocate_plx_memory(device_t device, int rid, u_long size);
 196 int sr_deallocate_resources(device_t device);
 197 int sr_attach(device_t device);
 198 int sr_detach(device_t device);
 199
 200 #endif /* _IF_SRREGS_H_ */