1 # $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $
3 # On the handling of kernel options
5 # All kernel options should be listed in LINT64, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT64 should compile as much code
8 # as possible. Try to structure option-using code so that a single
9 # option only switch code on, or only switch code off, to make it
10 # possible to have a full compile-test. If necessary, you can include
11 # "opt_lint.h" and check for COMPILING_LINT64 to get maximum code
14 # All new options shall also be listed in either "conf/options" or
15 # "platform/<platform>/conf/options". Options that affect a single
16 # source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while
17 # options that affect multiple files should either go in
18 # "opt_global.h" if this is a kernel-wide option (used just about
19 # everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect
20 # only some files. Note that the effect of listing only an option
21 # without a header-file-name in conf/options (and cousins) is that the
22 # last convention is followed.
24 # This handling scheme is not yet fully implemented.
27 # Format of this file:
28 # Option name filename
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
33 # Adaptec Array Controller driver options
36 # Adaptec aic7xxx SCSI controller options
37 AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory
40 AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable
41 # targetmode operations.
43 AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our
46 AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code.
48 AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options.
49 # See sys/dev/aic7xxx/aic7xxx.h
51 AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug
52 # output. Adds ~15k to driver.
54 # Adaptec aic79xx SCSI controller options
55 AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code.
57 AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options.
58 # See sys/dev/aic7xxx/aic79xx.h
60 AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable
61 # targetmode operations.
63 AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug
64 # output. Adds ~15k to driver.
66 ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory
71 #options for ACPI support
73 ACPI_NO_SEMAPHORES opt_acpi.h
74 ACPI_ENABLE_PCI opt_acpi.h
76 # Miscellaneous options.
77 COMPILING_LINT opt_lint.h
80 DDB_UNATTENDED opt_ddb.h
81 GDB_REMOTE_CHAT opt_ddb.h
111 DIRECTIO opt_directio.h
113 # POSIX kernel options
114 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
116 # Do we want the config file compiled into the kernel?
117 INCLUDE_CONFIG_FILE opt_config.h
119 # Options for static file systems. These should only be used at config
120 # time, since the corresponding lkms cannot work if there are any static
121 # dependencies. Unusability is enforced by hiding the defines for the
122 # options in a never-included header.
127 MSDOSFS opt_dontuse.h
137 # These static filesystems has one slightly bogus static dependency in
138 # sys/platform/.../i386/autoconf.c. If any of these filesystems are
139 # statically compiled into the kernel, code for mounting them as root
140 # filesystems will be enabled - but look below. Boot-code is purposely
141 # unavailable for the LKM-based versions.
146 # filesystems and libiconv bridge
147 CD9660_ICONV opt_dontuse.h
148 MSDOSFS_ICONV opt_dontuse.h
149 NTFS_ICONV opt_dontuse.h
154 # If you are following the conditions in the copyright,
155 # you can enable soft-updates which will speed up a lot of things
156 # and make the system safer from crashes at the same time.
157 # otherwise a STUB module will be compiled in.
158 SOFTUPDATES opt_ffs.h
160 # Enable fast hash lookups for large directories on UFS-based filesystems.
161 UFS_DIRHASH opt_ufs.h
163 # The above static dependencies are planned removed, with a
164 # <filesystem>_ROOT option to control if it usable as root. This list
165 # allows these options to be present in config files already (though
166 # they won't make any difference yet).
168 NFS_ROOT opt_nfsroot.h
170 # Options used only in subr_param.c.
174 NMBCLUSTERS opt_param.h
176 VM_BCACHE_SIZE_MAX opt_param.h
177 VM_SWZONE_SIZE_MAX opt_param.h
183 # Generic SCSI options.
184 CAM_MAX_HIGHPOWER opt_cam.h
186 CAM_DEBUG_DELAY opt_cam.h
187 CAM_DEBUG_BUS opt_cam.h
188 CAM_DEBUG_TARGET opt_cam.h
189 CAM_DEBUG_LUN opt_cam.h
190 CAM_DEBUG_FLAGS opt_cam.h
191 SCSI_DELAY opt_scsi.h
192 SCSI_NO_SENSE_STRINGS opt_scsi.h
193 SCSI_NO_OP_STRINGS opt_scsi.h
196 ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
198 # Options used only in cam/scsi/scsi_cd.c
199 CHANGER_MIN_BUSY_SECONDS opt_cd.h
200 CHANGER_MAX_BUSY_SECONDS opt_cd.h
202 # Options used only in cam/scsi/scsi_sa.c.
203 SA_IO_TIMEOUT opt_sa.h
204 SA_SPACE_TIMEOUT opt_sa.h
205 SA_REWIND_TIMEOUT opt_sa.h
206 SA_ERASE_TIMEOUT opt_sa.h
207 SA_1FM_AT_EOD opt_sa.h
209 # Options used only in cam/scsi/scsi_pt.c
210 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
212 # Options used only in cam/scsi/scsi_ses.c
213 SES_ENABLE_PASSTHROUGH opt_ses.h
215 # Options used in dev/sym/ (Symbios SCSI driver).
216 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
217 # Allows the ncr to take precedence
218 # 1 (1<<0) -> 810a, 860
219 # 2 (1<<1) -> 825a, 875, 885, 895
220 # 4 (1<<2) -> 895a, 896, 1510d
221 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
222 # disabled:0 (default), enabled:1
223 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
224 # disabled:0, enabled:1 (default)
225 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
226 # default:8, range:[1..64]
228 # Options used only in pci/ncr.c
229 SCSI_NCR_DEBUG opt_ncr.h
230 SCSI_NCR_MAX_SYNC opt_ncr.h
231 SCSI_NCR_MAX_WIDE opt_ncr.h
232 SCSI_NCR_MYADDR opt_ncr.h
234 # Options used only in pci/isp_pci.c
235 ISP_TARGET_MODE opt_isp.h
237 # Options used in the 'nata' ATA/ATAPI driver
238 ATA_STATIC_ID opt_ata.h
248 ALTQ_FAIRQ opt_altq.h
249 ALTQ_NOPCC opt_altq.h
250 ALTQ_DEBUG opt_altq.h
255 BOOTP_COMPAT opt_bootp.h
256 BOOTP_NFSROOT opt_bootp.h
257 BOOTP_WIRED_TO opt_bootp.h
259 MROUTING opt_mrouting.h
264 IPSEC_ESP opt_ipsec.h
265 IPSEC_DEBUG opt_ipsec.h
266 IPSEC_FILTERGIF opt_ipsec.h
267 FAST_IPSEC opt_ipsec.h
270 DUMMYNET_DEBUG opt_ipdn.h
271 IPFIREWALL opt_ipfw.h
272 IPFIREWALL3 opt_ipfw.h
273 IPFIREWALL_DEBUG opt_ipfw.h
274 IPFIREWALL_VERBOSE opt_ipfw.h
275 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
276 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
277 IPV6FIREWALL opt_ip6fw.h
278 IPV6FIREWALL_VERBOSE opt_ip6fw.h
279 IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h
280 IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h
284 PPP_BSDCOMP opt_ppp.h
285 PPP_DEFLATE opt_ppp.h
288 TCP_SIGNATURE opt_inet.h
289 TCP_DROP_SYNFIN opt_tcp_input.h
293 MBUF_STRESS_TEST opt_mbuf_stress_test.h
295 # (New netgraph, port still in progress)
297 # Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code.
298 # Each netgraph node type can be either be compiled into the kernel
299 # or loaded dynamically. To get the former, include the corresponding
300 # option below. Each type has its own man page, e.g. ng_async(4).
302 NETGRAPH7_DEBUG opt_netgraph.h
303 NETGRAPH7_ASYNC opt_netgraph.h
304 NETGRAPH7_ATMLLC opt_netgraph.h
305 NETGRAPH7_ATM_ATMPIF opt_netgraph.h
306 NETGRAPH7_BLUETOOTH opt_netgraph.h
307 NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h
308 NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h
309 NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h
310 NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h
311 NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h
312 NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h
313 NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h
314 NETGRAPH7_BPF opt_netgraph.h
315 NETGRAPH7_BRIDGE opt_netgraph.h
316 NETGRAPH7_CAR opt_netgraph.h
317 NETGRAPH7_CISCO opt_netgraph.h
318 NETGRAPH7_DEFLATE opt_netgraph.h
319 NETGRAPH7_DEVICE opt_netgraph.h
320 NETGRAPH7_ECHO opt_netgraph.h
321 NETGRAPH7_EIFACE opt_netgraph.h
322 NETGRAPH7_ETF opt_netgraph.h
323 NETGRAPH7_ETHER opt_netgraph.h
324 NETGRAPH7_FEC opt_netgraph.h
325 NETGRAPH7_FRAME_RELAY opt_netgraph.h
326 NETGRAPH7_GIF opt_netgraph.h
327 NETGRAPH7_GIF_DEMUX opt_netgraph.h
328 NETGRAPH7_HOLE opt_netgraph.h
329 NETGRAPH7_HUB opt_netgraph.h
330 NETGRAPH7_IFACE opt_netgraph.h
331 NETGRAPH7_IP_INPUT opt_netgraph.h
332 NETGRAPH7_IPFW opt_netgraph.h
333 NETGRAPH7_KSOCKET opt_netgraph.h
334 NETGRAPH7_L2TP opt_netgraph.h
335 NETGRAPH7_LMI opt_netgraph.h
336 # MPPC compression requires proprietary files (not included)
337 NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h
338 NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h
339 NETGRAPH7_NAT opt_netgraph.h
340 NETGRAPH7_NETFLOW opt_netgraph.h
341 NETGRAPH7_ONE2MANY opt_netgraph.h
342 NETGRAPH7_PPP opt_netgraph.h
343 NETGRAPH7_PPPOE opt_netgraph.h
344 NETGRAPH7_PPTPGRE opt_netgraph.h
345 NETGRAPH7_PRED1 opt_netgraph.h
346 NETGRAPH7_RFC1490 opt_netgraph.h
347 NETGRAPH7_SOCKET opt_netgraph.h
348 NETGRAPH7_SPLIT opt_netgraph.h
349 NETGRAPH7_SPPP opt_netgraph.h
350 NETGRAPH7_TAG opt_netgraph.h
351 NETGRAPH7_TCPMSS opt_netgraph.h
352 NETGRAPH7_TEE opt_netgraph.h
353 NETGRAPH7_TTY opt_netgraph.h
354 NETGRAPH7_UI opt_netgraph.h
355 NETGRAPH7_VJC opt_netgraph.h
358 NGATM7_ATM opt_netgraph.h
359 NGATM7_ATMBASE opt_netgraph.h
360 NGATM7_SSCOP opt_netgraph.h
361 NGATM7_SSCFU opt_netgraph.h
362 NGATM7_UNI opt_netgraph.h
363 NGATM7_CCATM opt_netgraph.h
365 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
366 # Each netgraph node type can be either be compiled into the kernel
367 # or loaded dynamically. To get the former, include the corresponding
368 # option below. Each type has its own man page, e.g. ng_async(8).
370 NETGRAPH_ASYNC opt_netgraph.h
371 NETGRAPH_BPF opt_netgraph.h
372 NETGRAPH_BRIDGE opt_netgraph.h
373 NETGRAPH_CISCO opt_netgraph.h
374 NETGRAPH_ECHO opt_netgraph.h
375 NETGRAPH_EIFACE opt_netgraph.h
376 NETGRAPH_ETHER opt_netgraph.h
377 NETGRAPH_FEC opt_netgraph.h
378 NETGRAPH_FRAME_RELAY opt_netgraph.h
379 NETGRAPH_HOLE opt_netgraph.h
380 NETGRAPH_IFACE opt_netgraph.h
381 NETGRAPH_KSOCKET opt_netgraph.h
382 NETGRAPH_LMI opt_netgraph.h
383 NETGRAPH_L2TP opt_netgraph.h
384 # MPPC compression requires proprietary files (not included)
385 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
386 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
387 NETGRAPH_ONE2MANY opt_netgraph.h
388 NETGRAPH_PPP opt_netgraph.h
389 NETGRAPH_PPPOE opt_netgraph.h
390 NETGRAPH_PPTPGRE opt_netgraph.h
391 NETGRAPH_RFC1490 opt_netgraph.h
392 NETGRAPH_SOCKET opt_netgraph.h
393 NETGRAPH_TEE opt_netgraph.h
394 NETGRAPH_TTY opt_netgraph.h
395 NETGRAPH_UI opt_netgraph.h
396 NETGRAPH_VJC opt_netgraph.h
405 # DPT driver debug flags
406 DPT_MEASURE_PERFORMANCE opt_dpt.h
407 DPT_HANDLE_TIMEOUTS opt_dpt.h
408 DPT_TIMEOUT_FACTOR opt_dpt.h
409 DPT_LOST_IRQ opt_dpt.h
410 DPT_RESET_HBA opt_dpt.h
412 # Misc debug flags. Most of these should probably be replaced with
413 # 'DEBUG', and then let people recompile just the interesting modules
414 # with 'make CC="cc -DDEBUG"'.
415 CLUSTERDEBUG opt_debug_cluster.h
416 DEBUG_1284 opt_ppb_1284.h
419 PLIP_DEBUG opt_plip.h
420 LOCKF_DEBUG opt_debug_lockf.h
421 SI_DEBUG opt_debug_si.h
425 FB_INSTALL_CDEV opt_fb.h
427 # ppbus related options
428 PERIPH_1284 opt_ppb_1284.h
429 DONTPROBE_1284 opt_ppb_1284.h
431 # smbus related options
432 ENABLE_ALART opt_intpm.h
434 # These cause changes all over the kernel
435 NO_LWKT_SPLIT_USERPRI opt_global.h
436 BLKDEV_IOSIZE opt_global.h
438 DEBUG_LOCKS opt_global.h
439 DEBUG_LOCKS_LATENCY opt_global.h
440 DEBUG_CRIT_SECTIONS opt_global.h
441 DIAGNOSTIC opt_global.h
442 INVARIANTS opt_global.h
443 VFS_BIO_DEBUG opt_global.h
444 SOCKBUF_DEBUG opt_global.h
445 PANIC_DEBUG opt_global.h
446 MBUF_DEBUG opt_global.h
447 PMAP_DEBUG opt_global.h
448 VM_PAGE_DEBUG opt_global.h
449 SLAB_DEBUG opt_global.h
451 # Sample system/interrupt PC
452 DEBUG_PCTRACK opt_pctrack.h
454 # These are VM related options
460 # Size of the kernel message buffer
461 MSGBUF_SIZE opt_msgbuf.h
464 NFS_MINATTRTIMO opt_nfs.h
465 NFS_MAXATTRTIMO opt_nfs.h
466 NFS_MINDIRATTRTIMO opt_nfs.h
467 NFS_MAXDIRATTRTIMO opt_nfs.h
468 NFS_GATHERDELAY opt_nfs.h
469 NFS_UIDHASHSIZ opt_nfs.h
470 NFS_WDELAYHASHSIZ opt_nfs.h
471 NFS_MUIDHASHSIZ opt_nfs.h
472 NFS_NOSERVER opt_nfs.h
476 MSDOSFS_DEBUG opt_msdosfs.h
478 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
479 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
480 BROOKTREE_ALLOC_PAGES opt_bktr.h
481 BKTR_OVERRIDE_CARD opt_bktr.h
482 BKTR_OVERRIDE_TUNER opt_bktr.h
483 BKTR_OVERRIDE_DBX opt_bktr.h
484 BKTR_OVERRIDE_MSP opt_bktr.h
485 BKTR_SYSTEM_DEFAULT opt_bktr.h
486 BKTR_ALLOC_PAGES opt_bktr.h
487 BKTR_USE_PLL opt_bktr.h
488 BKTR_GPIO_ACCESS opt_bktr.h
489 BKTR_NO_MSP_RESET opt_bktr.h
490 BKTR_430_FX_MODE opt_bktr.h
491 BKTR_SIS_VIA_MODE opt_bktr.h
492 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
494 # Various mi ISA bus flags
496 COM_MULTIPORT opt_sio.h
497 BREAK_TO_DEBUGGER opt_comconsole.h
498 ALT_BREAK_TO_DEBUGGER opt_comconsole.h
500 # options for bus/device framework
503 # options for USB support
507 # options for the Realtek RTL8188*U/RTL8192CU driver (urtwn)
508 URTWN_WITHOUT_UCODE opt_urtwn.h
511 VINUMDEBUG opt_vinum.h
513 # Embedded system options
514 UKBD_DFLT_KEYMAP opt_ukbd.h
515 INIT_PATH opt_init_path.h
517 ROOTDEVNAME opt_rootdevname.h
520 PCFCLOCK_VERBOSE opt_pcfclock.h
521 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
523 # Network device queue based polling
524 IFPOLL_ENABLE opt_ifpoll.h
526 # options for ubsec driver
527 UBSEC_DEBUG opt_ubsec.h
528 UBSEC_RNDTEST opt_ubsec.h
529 UBSEC_NO_RNG opt_ubsec.h
531 # options for hifn driver
532 HIFN_DEBUG opt_hifn.h
533 HIFN_RNDTEST opt_hifn.h
534 HIFN_NO_RNG opt_hifn.h
536 # options for safenet driver
537 SAFE_DEBUG opt_safe.h
538 SAFE_NO_RNG opt_safe.h
539 SAFE_RNDTEST opt_safe.h
543 KTR_ENTRIES opt_global.h
545 KTR_ACPI_EC opt_ktr.h
547 KTR_DMCRYPT opt_ktr.h
548 KTR_ETHERNET opt_ktr.h
554 KTR_IF_START opt_ktr.h
556 KTR_KERNENTRY opt_ktr.h
558 KTR_SERIALIZER opt_ktr.h
559 KTR_SPIN_CONTENTION opt_ktr.h
560 KTR_TESTLOG opt_ktr.h
563 KTR_USCHED_BSD4 opt_ktr.h
564 KTR_USCHED_DFLY opt_ktr.h
565 KTR_VERBOSE opt_ktr.h
566 KTR_IF_POLL opt_ktr.h
568 KTR_SOWAKEUP opt_ktr.h
571 NTFS_DEBUG opt_ntfs.h
573 # options for the Atheros driver
575 #ATH_DEBUG_ALQ opt_ath.h
576 ATH_DIAGAPI opt_ath.h
577 #ATH_EEPROM_FIRMWARE opt_ath.h
578 #ATH_ENABLE_11N opt_ath.h
579 ATH_ENABLE_DFS opt_ath.h
580 #ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h
581 ATH_KTR_INTR_DEBUG opt_ath.h
582 #ATH_TX99_DIAG opt_ath.h
585 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
588 #AH_DEBUG_ALQ opt_ah.h
589 #AH_DEBUG_COUNTRY opt_ah.h
590 AH_INTERRUPT_DEBUGGING opt_ah.h
592 AH_NEED_DESC_SWAP opt_ah.h
593 AH_PRIVATE_DIAG opt_ah.h
594 AH_RXCFG_SDMAMW_4BYTES opt_ah.h
595 AH_SUPPORT_AR5416 opt_ah.h
596 AH_SUPPORT_AR9130 opt_ah.h
597 AH_SUPPORT_AR9330 opt_ah.h
598 AH_SUPPORT_AR9340 opt_ah.h
599 AH_USE_INIPDGAIN opt_ah.h
600 #AH_WRITE_EEPROM opt_ah.h
601 #AH_WRITE_REGDOMAIN opt_ah.h
604 BCE_RSS_DEBUG opt_bce.h
605 BCE_TSS_DEBUG opt_bce.h
608 BNX_RSS_DEBUG opt_bnx.h
609 BNX_TSO_DEBUG opt_bnx.h
610 BNX_TSS_DEBUG opt_bnx.h
614 BWN_RXRING_SLOTS opt_bwn.h
615 BWN_TXRING_SLOTS opt_bwn.h
618 SIBA_DEBUG opt_siba.h
621 EMX_RSS_DEBUG opt_emx.h
622 EMX_TSO_DEBUG opt_emx.h
623 EMX_TSS_DEBUG opt_emx.h
626 JME_RSS_DEBUG opt_jme.h
629 IGB_RSS_DEBUG opt_igb.h
630 IGB_TSS_DEBUG opt_igb.h
631 IGB_MSIX_DEBUG opt_igb.h
634 IX_RSS_DEBUG opt_ix.h
636 # Options for the Intel 802.11ac wireless driver
639 # Options for the Intel 802.11n wireless driver
642 # Options for the Intel 3945ABG wireless driver
646 DCONS_BUF_SIZE opt_dcons.h
647 DCONS_POLL_HZ opt_dcons.h
648 DCONS_FORCE_CONSOLE opt_dcons.h
649 DCONS_FORCE_GDB opt_dcons.h
651 # deprecated drivers and options
652 I_WANT_DEPRECATED_STUFF opt_deprecated.h
654 # Receive Side Scaling (now basecode)
658 WDOG_DISABLE_ON_PANIC opt_panic.h
659 ERROR_LED_ON_PANIC opt_panic.h
661 # 802.11 support layer
662 IEEE80211_DEBUG opt_wlan.h
663 IEEE80211_DEBUG_REFCNT opt_wlan.h
664 IEEE80211_SUPPORT_MESH opt_wlan.h
665 IEEE80211_SUPPORT_SUPERG opt_wlan.h
666 IEEE80211_SUPPORT_TDMA opt_wlan.h
668 # 802.11 TDMA support
669 TDMA_SLOTLEN_DEFAULT opt_tdma.h
670 TDMA_SLOTCNT_DEFAULT opt_tdma.h
671 TDMA_BINTVAL_DEFAULT opt_tdma.h
672 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
673 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
674 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
675 TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
676 TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
677 TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
678 TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
679 TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
683 SND_DIAGNOSTIC opt_snd.h
684 SND_FEEDER_MULTIFORMAT opt_snd.h
685 SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
686 SND_FEEDER_RATE_HP opt_snd.h
688 SND_OLDSTEREO opt_snd.h
690 PANIC_REBOOT_WAIT_TIME opt_panic.h
692 # Obsolete options (will be removed in the future)
694 SYSVMSG opt_dontuse.h
695 SYSVSEM opt_dontuse.h
696 SYSVSHM opt_dontuse.h
697 P1003_1B opt_dontuse.h
698 _KPOSIX_VERSION opt_dontuse.h
699 DSCHED_FQ opt_dontuse.h