kernel - Fix bugs in recent RSS/swap commits

[dragonfly.git] / sys / dev / drm / drm_probe_helper.c

/*
 * Copyright (c) 2006-2008 Intel Corporation
 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
 *
 * DRM core CRTC related functions
 *
 * Permission to use, copy, modify, distribute, and sell this software and its
 * documentation for any purpose is hereby granted without fee, provided that
 * the above copyright notice appear in all copies and that both that copyright
 * notice and this permission notice appear in supporting documentation, and
 * that the name of the copyright holders not be used in advertising or
 * publicity pertaining to distribution of the software without specific,
 * written prior permission.  The copyright holders make no representations
 * about the suitability of this software for any purpose.  It is provided "as
 * is" without express or implied warranty.
 *
 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
 * OF THIS SOFTWARE.
 *
 * Authors:
 *      Keith Packard
 *      Eric Anholt <eric@anholt.net>
 *      Dave Airlie <airlied@linux.ie>
 *      Jesse Barnes <jesse.barnes@intel.com>
 */

#include <linux/export.h>
#include <linux/moduleparam.h>

#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <uapi_drm/drm_fourcc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_edid.h>

/**
 * DOC: output probing helper overview
 *
 * This library provides some helper code for output probing. It provides an
 * implementation of the core connector->fill_modes interface with
 * drm_helper_probe_single_connector_modes.
 *
 * It also provides support for polling connectors with a work item and for
 * generic hotplug interrupt handling where the driver doesn't or cannot keep
 * track of a per-connector hpd interrupt.
 *
 * This helper library can be used independently of the modeset helper library.
 * Drivers can also overwrite different parts e.g. use their own hotplug
 * handling code to avoid probing unrelated outputs.
 *
 * The probe helpers share the function table structures with other display
 * helper libraries. See struct &drm_connector_helper_funcs for the details.
 */

static bool drm_kms_helper_poll = true;
module_param_named(poll, drm_kms_helper_poll, bool, 0600);

static enum drm_mode_status
drm_mode_validate_flag(const struct drm_display_mode *mode,
                       int flags)
{
        if ((mode->flags & DRM_MODE_FLAG_INTERLACE) &&
            !(flags & DRM_MODE_FLAG_INTERLACE))
                return MODE_NO_INTERLACE;

        if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) &&
            !(flags & DRM_MODE_FLAG_DBLSCAN))
                return MODE_NO_DBLESCAN;

        if ((mode->flags & DRM_MODE_FLAG_3D_MASK) &&
            !(flags & DRM_MODE_FLAG_3D_MASK))
                return MODE_NO_STEREO;

        return MODE_OK;
}

static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector)
{
        struct drm_display_mode *mode;

        if (!connector->cmdline_mode.specified)
                return 0;

        mode = drm_mode_create_from_cmdline_mode(connector->dev,
                                                 &connector->cmdline_mode);
        if (mode == NULL)
                return 0;

        drm_mode_probed_add(connector, mode);
        return 1;
}

#define DRM_OUTPUT_POLL_PERIOD (10*HZ)
/**
 * drm_kms_helper_poll_enable_locked - re-enable output polling.
 * @dev: drm_device
 *
 * This function re-enables the output polling work without
 * locking the mode_config mutex.
 *
 * This is like drm_kms_helper_poll_enable() however it is to be
 * called from a context where the mode_config mutex is locked
 * already.
 */
void drm_kms_helper_poll_enable_locked(struct drm_device *dev)
{
        bool poll = false;
        struct drm_connector *connector;

        WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));

        if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
                return;

        drm_for_each_connector(connector, dev) {
                if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
                                         DRM_CONNECTOR_POLL_DISCONNECT))
                        poll = true;
        }

        if (poll)
                schedule_delayed_work(&dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD);
}
EXPORT_SYMBOL(drm_kms_helper_poll_enable_locked);

/**
 * drm_helper_probe_single_connector_modes - get complete set of display modes
 * @connector: connector to probe
 * @maxX: max width for modes
 * @maxY: max height for modes
 *
 * Based on the helper callbacks implemented by @connector in struct
 * &drm_connector_helper_funcs try to detect all valid modes.  Modes will first
 * be added to the connector's probed_modes list, then culled (based on validity
 * and the @maxX, @maxY parameters) and put into the normal modes list.
 *
 * Intended to be used as a generic implementation of the ->fill_modes()
 * @connector vfunc for drivers that use the CRTC helpers for output mode
 * filtering and detection.
 *
 * The basic procedure is as follows
 *
 * 1. All modes currently on the connector's modes list are marked as stale
 *
 * 2. New modes are added to the connector's probed_modes list with
 *    drm_mode_probed_add(). New modes start their life with status as OK.
 *    Modes are added from a single source using the following priority order.
 *
 *    - debugfs 'override_edid' (used for testing only)
 *    - firmware EDID (drm_load_edid_firmware())
 *    - connector helper ->get_modes() vfunc
 *    - if the connector status is connector_status_connected, standard
 *      VESA DMT modes up to 1024x768 are automatically added
 *      (drm_add_modes_noedid())
 *
 *    Finally modes specified via the kernel command line (video=...) are
 *    added in addition to what the earlier probes produced
 *    (drm_helper_probe_add_cmdline_mode()). These modes are generated
 *    using the VESA GTF/CVT formulas.
 *
 * 3. Modes are moved from the probed_modes list to the modes list. Potential
 *    duplicates are merged together (see drm_mode_connector_list_update()).
 *    After this step the probed_modes list will be empty again.
 *
 * 4. Any non-stale mode on the modes list then undergoes validation
 *
 *    - drm_mode_validate_basic() performs basic sanity checks
 *    - drm_mode_validate_size() filters out modes larger than @maxX and @maxY
 *      (if specified)
 *    - drm_mode_validate_flag() checks the modes againt basic connector
 *      capabilites (interlace_allowed,doublescan_allowed,stereo_allowed)
 *    - the optional connector ->mode_valid() helper can perform driver and/or
 *      hardware specific checks
 *
 * 5. Any mode whose status is not OK is pruned from the connector's modes list,
 *    accompanied by a debug message indicating the reason for the mode's
 *    rejection (see drm_mode_prune_invalid()).
 *
 * Returns:
 * The number of modes found on @connector.
 */
int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
                                            uint32_t maxX, uint32_t maxY)
{
        struct drm_device *dev = connector->dev;
        struct drm_display_mode *mode;
        const struct drm_connector_helper_funcs *connector_funcs =
                connector->helper_private;
        int count = 0;
        int mode_flags = 0;
        bool verbose_prune = true;
        enum drm_connector_status old_status;

        WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));

        DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
                        connector->name);
        /* set all old modes to the stale state */
        list_for_each_entry(mode, &connector->modes, head)
                mode->status = MODE_STALE;

        old_status = connector->status;

        if (connector->force) {
                if (connector->force == DRM_FORCE_ON ||
                    connector->force == DRM_FORCE_ON_DIGITAL)
                        connector->status = connector_status_connected;
                else
                        connector->status = connector_status_disconnected;
                if (connector->funcs->force)
                        connector->funcs->force(connector);
        } else {
                connector->status = connector->funcs->detect(connector, true);
        }

        /*
         * Normally either the driver's hpd code or the poll loop should
         * pick up any changes and fire the hotplug event. But if
         * userspace sneaks in a probe, we might miss a change. Hence
         * check here, and if anything changed start the hotplug code.
         */
        if (old_status != connector->status) {
                DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
                              connector->base.id,
                              connector->name,
                              drm_get_connector_status_name(old_status),
                              drm_get_connector_status_name(connector->status));

                /*
                 * The hotplug event code might call into the fb
                 * helpers, and so expects that we do not hold any
                 * locks. Fire up the poll struct instead, it will
                 * disable itself again.
                 */
                dev->mode_config.delayed_event = true;
                if (dev->mode_config.poll_enabled)
                        schedule_delayed_work(&dev->mode_config.output_poll_work,
                                              0);
        }

        /* Re-enable polling in case the global poll config changed. */
        if (drm_kms_helper_poll != dev->mode_config.poll_running)
                drm_kms_helper_poll_enable_locked(dev);

        dev->mode_config.poll_running = drm_kms_helper_poll;

        if (connector->status == connector_status_disconnected) {
                DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n",
                        connector->base.id, connector->name);
                drm_mode_connector_update_edid_property(connector, NULL);
                verbose_prune = false;
                goto prune;
        }

        if (connector->override_edid) {
                struct edid *edid = (struct edid *) connector->edid_blob_ptr->data;

                count = drm_add_edid_modes(connector, edid);
                drm_edid_to_eld(connector, edid);
        } else {
#ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE
                count = drm_load_edid_firmware(connector);
                if (count == 0)
#endif
                        count = (*connector_funcs->get_modes)(connector);
        }

        if (count == 0 && connector->status == connector_status_connected)
                count = drm_add_modes_noedid(connector, 1024, 768);
        count += drm_helper_probe_add_cmdline_mode(connector);
        if (count == 0)
                goto prune;

        drm_mode_connector_list_update(connector);

        if (connector->interlace_allowed)
                mode_flags |= DRM_MODE_FLAG_INTERLACE;
        if (connector->doublescan_allowed)
                mode_flags |= DRM_MODE_FLAG_DBLSCAN;
        if (connector->stereo_allowed)
                mode_flags |= DRM_MODE_FLAG_3D_MASK;

        list_for_each_entry(mode, &connector->modes, head) {
                if (mode->status == MODE_OK)
                        mode->status = drm_mode_validate_basic(mode);

                if (mode->status == MODE_OK)
                        mode->status = drm_mode_validate_size(mode, maxX, maxY);

                if (mode->status == MODE_OK)
                        mode->status = drm_mode_validate_flag(mode, mode_flags);

                if (mode->status == MODE_OK && connector_funcs->mode_valid)
                        mode->status = connector_funcs->mode_valid(connector,
                                                                   mode);
        }

prune:
        drm_mode_prune_invalid(dev, &connector->modes, verbose_prune);

        if (list_empty(&connector->modes))
                return 0;

        list_for_each_entry(mode, &connector->modes, head)
                mode->vrefresh = drm_mode_vrefresh(mode);

        drm_mode_sort(&connector->modes);

        DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id,
                        connector->name);
        list_for_each_entry(mode, &connector->modes, head) {
                drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
                drm_mode_debug_printmodeline(mode);
        }

        return count;
}
EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);

/**
 * drm_kms_helper_hotplug_event - fire off KMS hotplug events
 * @dev: drm_device whose connector state changed
 *
 * This function fires off the uevent for userspace and also calls the
 * output_poll_changed function, which is most commonly used to inform the fbdev
 * emulation code and allow it to update the fbcon output configuration.
 *
 * Drivers should call this from their hotplug handling code when a change is
 * detected. Note that this function does not do any output detection of its
 * own, like drm_helper_hpd_irq_event() does - this is assumed to be done by the
 * driver already.
 *
 * This function must be called from process context with no mode
 * setting locks held.
 */
void drm_kms_helper_hotplug_event(struct drm_device *dev)
{
        /* send a uevent + call fbdev */
        drm_sysfs_hotplug_event(dev);
        if (dev->mode_config.funcs->output_poll_changed)
                dev->mode_config.funcs->output_poll_changed(dev);
}
EXPORT_SYMBOL(drm_kms_helper_hotplug_event);

static void output_poll_execute(struct work_struct *work)
{
        struct delayed_work *delayed_work = to_delayed_work(work);
        struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work);
        struct drm_connector *connector;
        enum drm_connector_status old_status;
        bool repoll = false, changed = false;

        if (!drm_kms_helper_poll)
                return;

        mutex_lock(&dev->mode_config.mutex);
        drm_for_each_connector(connector, dev) {

                /* Ignore forced connectors. */
                if (connector->force)
                        continue;

                /* Ignore HPD capable connectors and connectors where we don't
                 * want any hotplug detection at all for polling. */
                if (!connector->polled || connector->polled == DRM_CONNECTOR_POLL_HPD)
                        continue;

                old_status = connector->status;
                /* if we are connected and don't want to poll for disconnect
                   skip it */
                if (old_status == connector_status_connected &&
                    !(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT))
                        continue;

                repoll = true;

                connector->status = connector->funcs->detect(connector, false);
                if (old_status != connector->status) {
                        const char *old, *new;

                        old = drm_get_connector_status_name(old_status);
                        new = drm_get_connector_status_name(connector->status);

                        DRM_DEBUG_KMS("[CONNECTOR:%d:%s] "
                                      "status updated from %s to %s\n",
                                      connector->base.id,
                                      connector->name,
                                      old, new);

                        changed = true;
                }
        }

        mutex_unlock(&dev->mode_config.mutex);

        if (changed)
                drm_kms_helper_hotplug_event(dev);

        if (repoll)
                schedule_delayed_work(delayed_work, DRM_OUTPUT_POLL_PERIOD);
}

/**
 * drm_kms_helper_poll_disable - disable output polling
 * @dev: drm_device
 *
 * This function disables the output polling work.
 *
 * Drivers can call this helper from their device suspend implementation. It is
 * not an error to call this even when output polling isn't enabled or arlready
 * disabled.
 */
void drm_kms_helper_poll_disable(struct drm_device *dev)
{
        if (!dev->mode_config.poll_enabled)
                return;
        cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
}
EXPORT_SYMBOL(drm_kms_helper_poll_disable);

/**
 * drm_kms_helper_poll_enable - re-enable output polling.
 * @dev: drm_device
 *
 * This function re-enables the output polling work.
 *
 * Drivers can call this helper from their device resume implementation. It is
 * an error to call this when the output polling support has not yet been set
 * up.
 */
void drm_kms_helper_poll_enable(struct drm_device *dev)
{
        mutex_lock(&dev->mode_config.mutex);
        drm_kms_helper_poll_enable_locked(dev);
        mutex_unlock(&dev->mode_config.mutex);
}
EXPORT_SYMBOL(drm_kms_helper_poll_enable);

/**
 * drm_kms_helper_poll_init - initialize and enable output polling
 * @dev: drm_device
 *
 * This function intializes and then also enables output polling support for
 * @dev. Drivers which do not have reliable hotplug support in hardware can use
 * this helper infrastructure to regularly poll such connectors for changes in
 * their connection state.
 *
 * Drivers can control which connectors are polled by setting the
 * DRM_CONNECTOR_POLL_CONNECT and DRM_CONNECTOR_POLL_DISCONNECT flags. On
 * connectors where probing live outputs can result in visual distortion drivers
 * should not set the DRM_CONNECTOR_POLL_DISCONNECT flag to avoid this.
 * Connectors which have no flag or only DRM_CONNECTOR_POLL_HPD set are
 * completely ignored by the polling logic.
 *
 * Note that a connector can be both polled and probed from the hotplug handler,
 * in case the hotplug interrupt is known to be unreliable.
 */
void drm_kms_helper_poll_init(struct drm_device *dev)
{
        INIT_DELAYED_WORK(&dev->mode_config.output_poll_work, output_poll_execute);
        dev->mode_config.poll_enabled = true;

        drm_kms_helper_poll_enable(dev);
}
EXPORT_SYMBOL(drm_kms_helper_poll_init);

/**
 * drm_kms_helper_poll_fini - disable output polling and clean it up
 * @dev: drm_device
 */
void drm_kms_helper_poll_fini(struct drm_device *dev)
{
        drm_kms_helper_poll_disable(dev);
}
EXPORT_SYMBOL(drm_kms_helper_poll_fini);

/**
 * drm_helper_hpd_irq_event - hotplug processing
 * @dev: drm_device
 *
 * Drivers can use this helper function to run a detect cycle on all connectors
 * which have the DRM_CONNECTOR_POLL_HPD flag set in their &polled member. All
 * other connectors are ignored, which is useful to avoid reprobing fixed
 * panels.
 *
 * This helper function is useful for drivers which can't or don't track hotplug
 * interrupts for each connector.
 *
 * Drivers which support hotplug interrupts for each connector individually and
 * which have a more fine-grained detect logic should bypass this code and
 * directly call drm_kms_helper_hotplug_event() in case the connector state
 * changed.
 *
 * This function must be called from process context with no mode
 * setting locks held.
 *
 * Note that a connector can be both polled and probed from the hotplug handler,
 * in case the hotplug interrupt is known to be unreliable.
 */
bool drm_helper_hpd_irq_event(struct drm_device *dev)
{
        struct drm_connector *connector;
        enum drm_connector_status old_status;
        bool changed = false;

        if (!dev->mode_config.poll_enabled)
                return false;

        mutex_lock(&dev->mode_config.mutex);
        drm_for_each_connector(connector, dev) {

                /* Only handle HPD capable connectors. */
                if (!(connector->polled & DRM_CONNECTOR_POLL_HPD))
                        continue;

                old_status = connector->status;

                connector->status = connector->funcs->detect(connector, false);
                DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
                              connector->base.id,
                              connector->name,
                              drm_get_connector_status_name(old_status),
                              drm_get_connector_status_name(connector->status));
                if (old_status != connector->status)
                        changed = true;
        }

        mutex_unlock(&dev->mode_config.mutex);

        if (changed)
                drm_kms_helper_hotplug_event(dev);

        return changed;
}
EXPORT_SYMBOL(drm_helper_hpd_irq_event);