Forced commit to note that the review and the suggestion
[dragonfly.git] / contrib / less-381 / regexp.c
blob77ab611f3bcb2aaf172428002eaca8e755e4fe59
1 /*
2 * regcomp and regexec -- regsub and regerror are elsewhere
4 * Copyright (c) 1986 by University of Toronto.
5 * Written by Henry Spencer. Not derived from licensed software.
7 * Permission is granted to anyone to use this software for any
8 * purpose on any computer system, and to redistribute it freely,
9 * subject to the following restrictions:
11 * 1. The author is not responsible for the consequences of use of
12 * this software, no matter how awful, even if they arise
13 * from defects in it.
15 * 2. The origin of this software must not be misrepresented, either
16 * by explicit claim or by omission.
18 * 3. Altered versions must be plainly marked as such, and must not
19 * be misrepresented as being the original software.
21 * Beware that some of this code is subtly aware of the way operator
22 * precedence is structured in regular expressions. Serious changes in
23 * regular-expression syntax might require a total rethink.
25 * *** NOTE: this code has been altered slightly for use in Tcl. ***
26 * Slightly modified by David MacKenzie to undo most of the changes for TCL.
27 * Added regexec2 with notbol parameter. -- 4/19/99 Mark Nudelman
30 #include "less.h"
31 #if HAVE_STDIO_H
32 #include <stdio.h>
33 #endif
34 #if HAVE_STDLIB_H
35 #include <stdlib.h>
36 #endif
37 #if HAVE_STRING_H
38 #include <string.h>
39 #endif
40 #include "regexp.h"
43 * The "internal use only" fields in regexp.h are present to pass info from
44 * compile to execute that permits the execute phase to run lots faster on
45 * simple cases. They are:
47 * regstart char that must begin a match; '\0' if none obvious
48 * reganch is the match anchored (at beginning-of-line only)?
49 * regmust string (pointer into program) that match must include, or NULL
50 * regmlen length of regmust string
52 * Regstart and reganch permit very fast decisions on suitable starting points
53 * for a match, cutting down the work a lot. Regmust permits fast rejection
54 * of lines that cannot possibly match. The regmust tests are costly enough
55 * that regcomp() supplies a regmust only if the r.e. contains something
56 * potentially expensive (at present, the only such thing detected is * or +
57 * at the start of the r.e., which can involve a lot of backup). Regmlen is
58 * supplied because the test in regexec() needs it and regcomp() is
59 * computing it anyway.
63 * Structure for regexp "program". This is essentially a linear encoding
64 * of a nondeterministic finite-state machine (aka syntax charts or
65 * "railroad normal form" in parsing technology). Each node is an opcode
66 * plus a "next" pointer, possibly plus an operand. "Next" pointers of
67 * all nodes except BRANCH implement concatenation; a "next" pointer with
68 * a BRANCH on both ends of it is connecting two alternatives. (Here we
69 * have one of the subtle syntax dependencies: an individual BRANCH (as
70 * opposed to a collection of them) is never concatenated with anything
71 * because of operator precedence.) The operand of some types of node is
72 * a literal string; for others, it is a node leading into a sub-FSM. In
73 * particular, the operand of a BRANCH node is the first node of the branch.
74 * (NB this is *not* a tree structure: the tail of the branch connects
75 * to the thing following the set of BRANCHes.) The opcodes are:
78 /* definition number opnd? meaning */
79 #undef EOL
80 #define END 0 /* no End of program. */
81 #define BOL 1 /* no Match "" at beginning of line. */
82 #define EOL 2 /* no Match "" at end of line. */
83 #define ANY 3 /* no Match any one character. */
84 #define ANYOF 4 /* str Match any character in this string. */
85 #define ANYBUT 5 /* str Match any character not in this string. */
86 #define BRANCH 6 /* node Match this alternative, or the next... */
87 #define BACK 7 /* no Match "", "next" ptr points backward. */
88 #define EXACTLY 8 /* str Match this string. */
89 #define NOTHING 9 /* no Match empty string. */
90 #define STAR 10 /* node Match this (simple) thing 0 or more times. */
91 #define PLUS 11 /* node Match this (simple) thing 1 or more times. */
92 #define OPEN 20 /* no Mark this point in input as start of #n. */
93 /* OPEN+1 is number 1, etc. */
94 #define CLOSE 30 /* no Analogous to OPEN. */
97 * Opcode notes:
99 * BRANCH The set of branches constituting a single choice are hooked
100 * together with their "next" pointers, since precedence prevents
101 * anything being concatenated to any individual branch. The
102 * "next" pointer of the last BRANCH in a choice points to the
103 * thing following the whole choice. This is also where the
104 * final "next" pointer of each individual branch points; each
105 * branch starts with the operand node of a BRANCH node.
107 * BACK Normal "next" pointers all implicitly point forward; BACK
108 * exists to make loop structures possible.
110 * STAR,PLUS '?', and complex '*' and '+', are implemented as circular
111 * BRANCH structures using BACK. Simple cases (one character
112 * per match) are implemented with STAR and PLUS for speed
113 * and to minimize recursive plunges.
115 * OPEN,CLOSE ...are numbered at compile time.
119 * A node is one char of opcode followed by two chars of "next" pointer.
120 * "Next" pointers are stored as two 8-bit pieces, high order first. The
121 * value is a positive offset from the opcode of the node containing it.
122 * An operand, if any, simply follows the node. (Note that much of the
123 * code generation knows about this implicit relationship.)
125 * Using two bytes for the "next" pointer is vast overkill for most things,
126 * but allows patterns to get big without disasters.
128 #define OP(p) (*(p))
129 #define NEXT(p) (((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
130 #define OPERAND(p) ((p) + 3)
133 * See regmagic.h for one further detail of program structure.
138 * Utility definitions.
140 #ifndef CHARBITS
141 #define UCHARAT(p) ((int)*(unsigned char *)(p))
142 #else
143 #define UCHARAT(p) ((int)*(p)&CHARBITS)
144 #endif
146 #define FAIL(m) { regerror(m); return(NULL); }
147 #define ISMULT(c) ((c) == '*' || (c) == '+' || (c) == '?')
148 #define META "^$.[()|?+*\\"
151 * Flags to be passed up and down.
153 #define HASWIDTH 01 /* Known never to match null string. */
154 #define SIMPLE 02 /* Simple enough to be STAR/PLUS operand. */
155 #define SPSTART 04 /* Starts with * or +. */
156 #define WORST 0 /* Worst case. */
159 * Global work variables for regcomp().
161 static char *regparse; /* Input-scan pointer. */
162 static int regnpar; /* () count. */
163 static char regdummy;
164 static char *regcode; /* Code-emit pointer; &regdummy = don't. */
165 static long regsize; /* Code size. */
168 * The first byte of the regexp internal "program" is actually this magic
169 * number; the start node begins in the second byte.
171 #define MAGIC 0234
175 * Forward declarations for regcomp()'s friends.
177 #ifndef STATIC
178 #define STATIC static
179 #endif
180 STATIC char *reg();
181 STATIC char *regbranch();
182 STATIC char *regpiece();
183 STATIC char *regatom();
184 STATIC char *regnode();
185 STATIC char *regnext();
186 STATIC void regc();
187 STATIC void reginsert();
188 STATIC void regtail();
189 STATIC void regoptail();
190 #ifdef STRCSPN
191 STATIC int strcspn();
192 #endif
195 - regcomp - compile a regular expression into internal code
197 * We can't allocate space until we know how big the compiled form will be,
198 * but we can't compile it (and thus know how big it is) until we've got a
199 * place to put the code. So we cheat: we compile it twice, once with code
200 * generation turned off and size counting turned on, and once "for real".
201 * This also means that we don't allocate space until we are sure that the
202 * thing really will compile successfully, and we never have to move the
203 * code and thus invalidate pointers into it. (Note that it has to be in
204 * one piece because free() must be able to free it all.)
206 * Beware that the optimization-preparation code in here knows about some
207 * of the structure of the compiled regexp.
209 regexp *
210 regcomp(exp)
211 char *exp;
213 register regexp *r;
214 register char *scan;
215 register char *longest;
216 register int len;
217 int flags;
219 if (exp == NULL)
220 FAIL("NULL argument");
222 /* First pass: determine size, legality. */
223 regparse = exp;
224 regnpar = 1;
225 regsize = 0L;
226 regcode = &regdummy;
227 regc(MAGIC);
228 if (reg(0, &flags) == NULL)
229 return(NULL);
231 /* Small enough for pointer-storage convention? */
232 if (regsize >= 32767L) /* Probably could be 65535L. */
233 FAIL("regexp too big");
235 /* Allocate space. */
236 r = (regexp *)malloc(sizeof(regexp) + (unsigned)regsize);
237 if (r == NULL)
238 FAIL("out of space");
240 /* Second pass: emit code. */
241 regparse = exp;
242 regnpar = 1;
243 regcode = r->program;
244 regc(MAGIC);
245 if (reg(0, &flags) == NULL)
246 return(NULL);
248 /* Dig out information for optimizations. */
249 r->regstart = '\0'; /* Worst-case defaults. */
250 r->reganch = 0;
251 r->regmust = NULL;
252 r->regmlen = 0;
253 scan = r->program+1; /* First BRANCH. */
254 if (OP(regnext(scan)) == END) { /* Only one top-level choice. */
255 scan = OPERAND(scan);
257 /* Starting-point info. */
258 if (OP(scan) == EXACTLY)
259 r->regstart = *OPERAND(scan);
260 else if (OP(scan) == BOL)
261 r->reganch++;
264 * If there's something expensive in the r.e., find the
265 * longest literal string that must appear and make it the
266 * regmust. Resolve ties in favor of later strings, since
267 * the regstart check works with the beginning of the r.e.
268 * and avoiding duplication strengthens checking. Not a
269 * strong reason, but sufficient in the absence of others.
271 if (flags&SPSTART) {
272 longest = NULL;
273 len = 0;
274 for (; scan != NULL; scan = regnext(scan))
275 if (OP(scan) == EXACTLY && ((int) strlen(OPERAND(scan))) >= len) {
276 longest = OPERAND(scan);
277 len = strlen(OPERAND(scan));
279 r->regmust = longest;
280 r->regmlen = len;
284 return(r);
288 - reg - regular expression, i.e. main body or parenthesized thing
290 * Caller must absorb opening parenthesis.
292 * Combining parenthesis handling with the base level of regular expression
293 * is a trifle forced, but the need to tie the tails of the branches to what
294 * follows makes it hard to avoid.
296 static char *
297 reg(paren, flagp)
298 int paren; /* Parenthesized? */
299 int *flagp;
301 register char *ret;
302 register char *br;
303 register char *ender;
304 register int parno = 0;
305 int flags;
307 *flagp = HASWIDTH; /* Tentatively. */
309 /* Make an OPEN node, if parenthesized. */
310 if (paren) {
311 if (regnpar >= NSUBEXP)
312 FAIL("too many ()");
313 parno = regnpar;
314 regnpar++;
315 ret = regnode(OPEN+parno);
316 } else
317 ret = NULL;
319 /* Pick up the branches, linking them together. */
320 br = regbranch(&flags);
321 if (br == NULL)
322 return(NULL);
323 if (ret != NULL)
324 regtail(ret, br); /* OPEN -> first. */
325 else
326 ret = br;
327 if (!(flags&HASWIDTH))
328 *flagp &= ~HASWIDTH;
329 *flagp |= flags&SPSTART;
330 while (*regparse == '|') {
331 regparse++;
332 br = regbranch(&flags);
333 if (br == NULL)
334 return(NULL);
335 regtail(ret, br); /* BRANCH -> BRANCH. */
336 if (!(flags&HASWIDTH))
337 *flagp &= ~HASWIDTH;
338 *flagp |= flags&SPSTART;
341 /* Make a closing node, and hook it on the end. */
342 ender = regnode((paren) ? CLOSE+parno : END);
343 regtail(ret, ender);
345 /* Hook the tails of the branches to the closing node. */
346 for (br = ret; br != NULL; br = regnext(br))
347 regoptail(br, ender);
349 /* Check for proper termination. */
350 if (paren && *regparse++ != ')') {
351 FAIL("unmatched ()");
352 } else if (!paren && *regparse != '\0') {
353 if (*regparse == ')') {
354 FAIL("unmatched ()");
355 } else
356 FAIL("junk on end"); /* "Can't happen". */
357 /* NOTREACHED */
360 return(ret);
364 - regbranch - one alternative of an | operator
366 * Implements the concatenation operator.
368 static char *
369 regbranch(flagp)
370 int *flagp;
372 register char *ret;
373 register char *chain;
374 register char *latest;
375 int flags;
377 *flagp = WORST; /* Tentatively. */
379 ret = regnode(BRANCH);
380 chain = NULL;
381 while (*regparse != '\0' && *regparse != '|' && *regparse != ')') {
382 latest = regpiece(&flags);
383 if (latest == NULL)
384 return(NULL);
385 *flagp |= flags&HASWIDTH;
386 if (chain == NULL) /* First piece. */
387 *flagp |= flags&SPSTART;
388 else
389 regtail(chain, latest);
390 chain = latest;
392 if (chain == NULL) /* Loop ran zero times. */
393 (void) regnode(NOTHING);
395 return(ret);
399 - regpiece - something followed by possible [*+?]
401 * Note that the branching code sequences used for ? and the general cases
402 * of * and + are somewhat optimized: they use the same NOTHING node as
403 * both the endmarker for their branch list and the body of the last branch.
404 * It might seem that this node could be dispensed with entirely, but the
405 * endmarker role is not redundant.
407 static char *
408 regpiece(flagp)
409 int *flagp;
411 register char *ret;
412 register char op;
413 register char *next;
414 int flags;
416 ret = regatom(&flags);
417 if (ret == NULL)
418 return(NULL);
420 op = *regparse;
421 if (!ISMULT(op)) {
422 *flagp = flags;
423 return(ret);
426 if (!(flags&HASWIDTH) && op != '?')
427 FAIL("*+ operand could be empty");
428 *flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
430 if (op == '*' && (flags&SIMPLE))
431 reginsert(STAR, ret);
432 else if (op == '*') {
433 /* Emit x* as (x&|), where & means "self". */
434 reginsert(BRANCH, ret); /* Either x */
435 regoptail(ret, regnode(BACK)); /* and loop */
436 regoptail(ret, ret); /* back */
437 regtail(ret, regnode(BRANCH)); /* or */
438 regtail(ret, regnode(NOTHING)); /* null. */
439 } else if (op == '+' && (flags&SIMPLE))
440 reginsert(PLUS, ret);
441 else if (op == '+') {
442 /* Emit x+ as x(&|), where & means "self". */
443 next = regnode(BRANCH); /* Either */
444 regtail(ret, next);
445 regtail(regnode(BACK), ret); /* loop back */
446 regtail(next, regnode(BRANCH)); /* or */
447 regtail(ret, regnode(NOTHING)); /* null. */
448 } else if (op == '?') {
449 /* Emit x? as (x|) */
450 reginsert(BRANCH, ret); /* Either x */
451 regtail(ret, regnode(BRANCH)); /* or */
452 next = regnode(NOTHING); /* null. */
453 regtail(ret, next);
454 regoptail(ret, next);
456 regparse++;
457 if (ISMULT(*regparse))
458 FAIL("nested *?+");
460 return(ret);
464 - regatom - the lowest level
466 * Optimization: gobbles an entire sequence of ordinary characters so that
467 * it can turn them into a single node, which is smaller to store and
468 * faster to run. Backslashed characters are exceptions, each becoming a
469 * separate node; the code is simpler that way and it's not worth fixing.
471 static char *
472 regatom(flagp)
473 int *flagp;
475 register char *ret;
476 int flags;
478 *flagp = WORST; /* Tentatively. */
480 switch (*regparse++) {
481 case '^':
482 ret = regnode(BOL);
483 break;
484 case '$':
485 ret = regnode(EOL);
486 break;
487 case '.':
488 ret = regnode(ANY);
489 *flagp |= HASWIDTH|SIMPLE;
490 break;
491 case '[': {
492 register int clss;
493 register int classend;
495 if (*regparse == '^') { /* Complement of range. */
496 ret = regnode(ANYBUT);
497 regparse++;
498 } else
499 ret = regnode(ANYOF);
500 if (*regparse == ']' || *regparse == '-')
501 regc(*regparse++);
502 while (*regparse != '\0' && *regparse != ']') {
503 if (*regparse == '-') {
504 regparse++;
505 if (*regparse == ']' || *regparse == '\0')
506 regc('-');
507 else {
508 clss = UCHARAT(regparse-2)+1;
509 classend = UCHARAT(regparse);
510 if (clss > classend+1)
511 FAIL("invalid [] range");
512 for (; clss <= classend; clss++)
513 regc(clss);
514 regparse++;
516 } else
517 regc(*regparse++);
519 regc('\0');
520 if (*regparse != ']')
521 FAIL("unmatched []");
522 regparse++;
523 *flagp |= HASWIDTH|SIMPLE;
525 break;
526 case '(':
527 ret = reg(1, &flags);
528 if (ret == NULL)
529 return(NULL);
530 *flagp |= flags&(HASWIDTH|SPSTART);
531 break;
532 case '\0':
533 case '|':
534 case ')':
535 FAIL("internal urp"); /* Supposed to be caught earlier. */
536 /* NOTREACHED */
537 break;
538 case '?':
539 case '+':
540 case '*':
541 FAIL("?+* follows nothing");
542 /* NOTREACHED */
543 break;
544 case '\\':
545 if (*regparse == '\0')
546 FAIL("trailing \\");
547 ret = regnode(EXACTLY);
548 regc(*regparse++);
549 regc('\0');
550 *flagp |= HASWIDTH|SIMPLE;
551 break;
552 default: {
553 register int len;
554 register char ender;
556 regparse--;
557 len = strcspn(regparse, META);
558 if (len <= 0)
559 FAIL("internal disaster");
560 ender = *(regparse+len);
561 if (len > 1 && ISMULT(ender))
562 len--; /* Back off clear of ?+* operand. */
563 *flagp |= HASWIDTH;
564 if (len == 1)
565 *flagp |= SIMPLE;
566 ret = regnode(EXACTLY);
567 while (len > 0) {
568 regc(*regparse++);
569 len--;
571 regc('\0');
573 break;
576 return(ret);
580 - regnode - emit a node
582 static char * /* Location. */
583 regnode(op)
584 char op;
586 register char *ret;
587 register char *ptr;
589 ret = regcode;
590 if (ret == &regdummy) {
591 regsize += 3;
592 return(ret);
595 ptr = ret;
596 *ptr++ = op;
597 *ptr++ = '\0'; /* Null "next" pointer. */
598 *ptr++ = '\0';
599 regcode = ptr;
601 return(ret);
605 - regc - emit (if appropriate) a byte of code
607 static void
608 regc(b)
609 char b;
611 if (regcode != &regdummy)
612 *regcode++ = b;
613 else
614 regsize++;
618 - reginsert - insert an operator in front of already-emitted operand
620 * Means relocating the operand.
622 static void
623 reginsert(op, opnd)
624 char op;
625 char *opnd;
627 register char *src;
628 register char *dst;
629 register char *place;
631 if (regcode == &regdummy) {
632 regsize += 3;
633 return;
636 src = regcode;
637 regcode += 3;
638 dst = regcode;
639 while (src > opnd)
640 *--dst = *--src;
642 place = opnd; /* Op node, where operand used to be. */
643 *place++ = op;
644 *place++ = '\0';
645 *place++ = '\0';
649 - regtail - set the next-pointer at the end of a node chain
651 static void
652 regtail(p, val)
653 char *p;
654 char *val;
656 register char *scan;
657 register char *temp;
658 register int offset;
660 if (p == &regdummy)
661 return;
663 /* Find last node. */
664 scan = p;
665 for (;;) {
666 temp = regnext(scan);
667 if (temp == NULL)
668 break;
669 scan = temp;
672 if (OP(scan) == BACK)
673 offset = scan - val;
674 else
675 offset = val - scan;
676 *(scan+1) = (offset>>8)&0377;
677 *(scan+2) = offset&0377;
681 - regoptail - regtail on operand of first argument; nop if operandless
683 static void
684 regoptail(p, val)
685 char *p;
686 char *val;
688 /* "Operandless" and "op != BRANCH" are synonymous in practice. */
689 if (p == NULL || p == &regdummy || OP(p) != BRANCH)
690 return;
691 regtail(OPERAND(p), val);
695 * regexec and friends
699 * Global work variables for regexec().
701 static char *reginput; /* String-input pointer. */
702 static char *regbol; /* Beginning of input, for ^ check. */
703 static char **regstartp; /* Pointer to startp array. */
704 static char **regendp; /* Ditto for endp. */
707 * Forwards.
709 STATIC int regtry();
710 STATIC int regmatch();
711 STATIC int regrepeat();
713 #ifdef DEBUG
714 int regnarrate = 0;
715 void regdump();
716 STATIC char *regprop();
717 #endif
720 - regexec - match a regexp against a string
723 regexec2(prog, string, notbol)
724 register regexp *prog;
725 register char *string;
726 int notbol;
728 register char *s;
730 /* Be paranoid... */
731 if (prog == NULL || string == NULL) {
732 regerror("NULL parameter");
733 return(0);
736 /* Check validity of program. */
737 if (UCHARAT(prog->program) != MAGIC) {
738 regerror("corrupted program");
739 return(0);
742 /* If there is a "must appear" string, look for it. */
743 if (prog->regmust != NULL) {
744 s = string;
745 while ((s = strchr(s, prog->regmust[0])) != NULL) {
746 if (strncmp(s, prog->regmust, prog->regmlen) == 0)
747 break; /* Found it. */
748 s++;
750 if (s == NULL) /* Not present. */
751 return(0);
754 /* Mark beginning of line for ^ . */
755 if (notbol)
756 regbol = NULL;
757 else
758 regbol = string;
760 /* Simplest case: anchored match need be tried only once. */
761 if (prog->reganch)
762 return(regtry(prog, string));
764 /* Messy cases: unanchored match. */
765 s = string;
766 if (prog->regstart != '\0')
767 /* We know what char it must start with. */
768 while ((s = strchr(s, prog->regstart)) != NULL) {
769 if (regtry(prog, s))
770 return(1);
771 s++;
773 else
774 /* We don't -- general case. */
775 do {
776 if (regtry(prog, s))
777 return(1);
778 } while (*s++ != '\0');
780 /* Failure. */
781 return(0);
785 regexec(prog, string)
786 register regexp *prog;
787 register char *string;
789 return regexec2(prog, string, 0);
793 - regtry - try match at specific point
795 static int /* 0 failure, 1 success */
796 regtry(prog, string)
797 regexp *prog;
798 char *string;
800 register int i;
801 register char **sp;
802 register char **ep;
804 reginput = string;
805 regstartp = prog->startp;
806 regendp = prog->endp;
808 sp = prog->startp;
809 ep = prog->endp;
810 for (i = NSUBEXP; i > 0; i--) {
811 *sp++ = NULL;
812 *ep++ = NULL;
814 if (regmatch(prog->program + 1)) {
815 prog->startp[0] = string;
816 prog->endp[0] = reginput;
817 return(1);
818 } else
819 return(0);
823 - regmatch - main matching routine
825 * Conceptually the strategy is simple: check to see whether the current
826 * node matches, call self recursively to see whether the rest matches,
827 * and then act accordingly. In practice we make some effort to avoid
828 * recursion, in particular by going through "ordinary" nodes (that don't
829 * need to know whether the rest of the match failed) by a loop instead of
830 * by recursion.
832 static int /* 0 failure, 1 success */
833 regmatch(prog)
834 char *prog;
836 register char *scan; /* Current node. */
837 char *next; /* Next node. */
839 scan = prog;
840 #ifdef DEBUG
841 if (scan != NULL && regnarrate)
842 fprintf(stderr, "%s(\n", regprop(scan));
843 #endif
844 while (scan != NULL) {
845 #ifdef DEBUG
846 if (regnarrate)
847 fprintf(stderr, "%s...\n", regprop(scan));
848 #endif
849 next = regnext(scan);
851 switch (OP(scan)) {
852 case BOL:
853 if (reginput != regbol)
854 return(0);
855 break;
856 case EOL:
857 if (*reginput != '\0')
858 return(0);
859 break;
860 case ANY:
861 if (*reginput == '\0')
862 return(0);
863 reginput++;
864 break;
865 case EXACTLY: {
866 register int len;
867 register char *opnd;
869 opnd = OPERAND(scan);
870 /* Inline the first character, for speed. */
871 if (*opnd != *reginput)
872 return(0);
873 len = strlen(opnd);
874 if (len > 1 && strncmp(opnd, reginput, len) != 0)
875 return(0);
876 reginput += len;
878 break;
879 case ANYOF:
880 if (*reginput == '\0' || strchr(OPERAND(scan), *reginput) == NULL)
881 return(0);
882 reginput++;
883 break;
884 case ANYBUT:
885 if (*reginput == '\0' || strchr(OPERAND(scan), *reginput) != NULL)
886 return(0);
887 reginput++;
888 break;
889 case NOTHING:
890 break;
891 case BACK:
892 break;
893 case OPEN+1:
894 case OPEN+2:
895 case OPEN+3:
896 case OPEN+4:
897 case OPEN+5:
898 case OPEN+6:
899 case OPEN+7:
900 case OPEN+8:
901 case OPEN+9: {
902 register int no;
903 register char *save;
905 no = OP(scan) - OPEN;
906 save = reginput;
908 if (regmatch(next)) {
910 * Don't set startp if some later
911 * invocation of the same parentheses
912 * already has.
914 if (regstartp[no] == NULL)
915 regstartp[no] = save;
916 return(1);
917 } else
918 return(0);
920 /* NOTREACHED */
921 break;
922 case CLOSE+1:
923 case CLOSE+2:
924 case CLOSE+3:
925 case CLOSE+4:
926 case CLOSE+5:
927 case CLOSE+6:
928 case CLOSE+7:
929 case CLOSE+8:
930 case CLOSE+9: {
931 register int no;
932 register char *save;
934 no = OP(scan) - CLOSE;
935 save = reginput;
937 if (regmatch(next)) {
939 * Don't set endp if some later
940 * invocation of the same parentheses
941 * already has.
943 if (regendp[no] == NULL)
944 regendp[no] = save;
945 return(1);
946 } else
947 return(0);
949 /* NOTREACHED */
950 break;
951 case BRANCH: {
952 register char *save;
954 if (OP(next) != BRANCH) /* No choice. */
955 next = OPERAND(scan); /* Avoid recursion. */
956 else {
957 do {
958 save = reginput;
959 if (regmatch(OPERAND(scan)))
960 return(1);
961 reginput = save;
962 scan = regnext(scan);
963 } while (scan != NULL && OP(scan) == BRANCH);
964 return(0);
965 /* NOTREACHED */
968 /* NOTREACHED */
969 break;
970 case STAR:
971 case PLUS: {
972 register char nextch;
973 register int no;
974 register char *save;
975 register int min;
978 * Lookahead to avoid useless match attempts
979 * when we know what character comes next.
981 nextch = '\0';
982 if (OP(next) == EXACTLY)
983 nextch = *OPERAND(next);
984 min = (OP(scan) == STAR) ? 0 : 1;
985 save = reginput;
986 no = regrepeat(OPERAND(scan));
987 while (no >= min) {
988 /* If it could work, try it. */
989 if (nextch == '\0' || *reginput == nextch)
990 if (regmatch(next))
991 return(1);
992 /* Couldn't or didn't -- back up. */
993 no--;
994 reginput = save + no;
996 return(0);
998 /* NOTREACHED */
999 break;
1000 case END:
1001 return(1); /* Success! */
1002 /* NOTREACHED */
1003 break;
1004 default:
1005 regerror("memory corruption");
1006 return(0);
1007 /* NOTREACHED */
1008 break;
1011 scan = next;
1015 * We get here only if there's trouble -- normally "case END" is
1016 * the terminating point.
1018 regerror("corrupted pointers");
1019 return(0);
1023 - regrepeat - repeatedly match something simple, report how many
1025 static int
1026 regrepeat(p)
1027 char *p;
1029 register int count = 0;
1030 register char *scan;
1031 register char *opnd;
1033 scan = reginput;
1034 opnd = OPERAND(p);
1035 switch (OP(p)) {
1036 case ANY:
1037 count = strlen(scan);
1038 scan += count;
1039 break;
1040 case EXACTLY:
1041 while (*opnd == *scan) {
1042 count++;
1043 scan++;
1045 break;
1046 case ANYOF:
1047 while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
1048 count++;
1049 scan++;
1051 break;
1052 case ANYBUT:
1053 while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
1054 count++;
1055 scan++;
1057 break;
1058 default: /* Oh dear. Called inappropriately. */
1059 regerror("internal foulup");
1060 count = 0; /* Best compromise. */
1061 break;
1063 reginput = scan;
1065 return(count);
1069 - regnext - dig the "next" pointer out of a node
1071 static char *
1072 regnext(p)
1073 register char *p;
1075 register int offset;
1077 if (p == &regdummy)
1078 return(NULL);
1080 offset = NEXT(p);
1081 if (offset == 0)
1082 return(NULL);
1084 if (OP(p) == BACK)
1085 return(p-offset);
1086 else
1087 return(p+offset);
1090 #ifdef DEBUG
1092 STATIC char *regprop();
1095 - regdump - dump a regexp onto stdout in vaguely comprehensible form
1097 void
1098 regdump(r)
1099 regexp *r;
1101 register char *s;
1102 register char op = EXACTLY; /* Arbitrary non-END op. */
1103 register char *next;
1106 s = r->program + 1;
1107 while (op != END) { /* While that wasn't END last time... */
1108 op = OP(s);
1109 printf("%2d%s", s-r->program, regprop(s)); /* Where, what. */
1110 next = regnext(s);
1111 if (next == NULL) /* Next ptr. */
1112 printf("(0)");
1113 else
1114 printf("(%d)", (s-r->program)+(next-s));
1115 s += 3;
1116 if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
1117 /* Literal string, where present. */
1118 while (*s != '\0') {
1119 putchar(*s);
1120 s++;
1122 s++;
1124 putchar('\n');
1127 /* Header fields of interest. */
1128 if (r->regstart != '\0')
1129 printf("start `%c' ", r->regstart);
1130 if (r->reganch)
1131 printf("anchored ");
1132 if (r->regmust != NULL)
1133 printf("must have \"%s\"", r->regmust);
1134 printf("\n");
1138 - regprop - printable representation of opcode
1140 static char *
1141 regprop(op)
1142 char *op;
1144 register char *p;
1145 static char buf[50];
1147 (void) strcpy(buf, ":");
1149 switch (OP(op)) {
1150 case BOL:
1151 p = "BOL";
1152 break;
1153 case EOL:
1154 p = "EOL";
1155 break;
1156 case ANY:
1157 p = "ANY";
1158 break;
1159 case ANYOF:
1160 p = "ANYOF";
1161 break;
1162 case ANYBUT:
1163 p = "ANYBUT";
1164 break;
1165 case BRANCH:
1166 p = "BRANCH";
1167 break;
1168 case EXACTLY:
1169 p = "EXACTLY";
1170 break;
1171 case NOTHING:
1172 p = "NOTHING";
1173 break;
1174 case BACK:
1175 p = "BACK";
1176 break;
1177 case END:
1178 p = "END";
1179 break;
1180 case OPEN+1:
1181 case OPEN+2:
1182 case OPEN+3:
1183 case OPEN+4:
1184 case OPEN+5:
1185 case OPEN+6:
1186 case OPEN+7:
1187 case OPEN+8:
1188 case OPEN+9:
1189 sprintf(buf+strlen(buf), "OPEN%d", OP(op)-OPEN);
1190 p = NULL;
1191 break;
1192 case CLOSE+1:
1193 case CLOSE+2:
1194 case CLOSE+3:
1195 case CLOSE+4:
1196 case CLOSE+5:
1197 case CLOSE+6:
1198 case CLOSE+7:
1199 case CLOSE+8:
1200 case CLOSE+9:
1201 sprintf(buf+strlen(buf), "CLOSE%d", OP(op)-CLOSE);
1202 p = NULL;
1203 break;
1204 case STAR:
1205 p = "STAR";
1206 break;
1207 case PLUS:
1208 p = "PLUS";
1209 break;
1210 default:
1211 regerror("corrupted opcode");
1212 break;
1214 if (p != NULL)
1215 (void) strcat(buf, p);
1216 return(buf);
1218 #endif
1221 * The following is provided for those people who do not have strcspn() in
1222 * their C libraries. They should get off their butts and do something
1223 * about it; at least one public-domain implementation of those (highly
1224 * useful) string routines has been published on Usenet.
1226 #ifdef STRCSPN
1228 * strcspn - find length of initial segment of s1 consisting entirely
1229 * of characters not from s2
1232 static int
1233 strcspn(s1, s2)
1234 char *s1;
1235 char *s2;
1237 register char *scan1;
1238 register char *scan2;
1239 register int count;
1241 count = 0;
1242 for (scan1 = s1; *scan1 != '\0'; scan1++) {
1243 for (scan2 = s2; *scan2 != '\0';) /* ++ moved down. */
1244 if (*scan1 == *scan2++)
1245 return(count);
1246 count++;
1248 return(count);
1250 #endif