2 * Copyright (c) 1997-2007 Kenneth D. Merry
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. The name of the author may not be used to endorse or promote products
14 * derived from this software without specific prior written permission.
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 * $FreeBSD: src/sbin/camcontrol/camcontrol.c,v 1.21.2.13 2003/01/08 17:55:02 njl Exp $
31 #include <sys/ioctl.h>
32 #include <sys/types.h>
43 #include <cam/cam_debug.h>
44 #include <cam/cam_ccb.h>
45 #include <cam/scsi/scsi_all.h>
46 #include <cam/scsi/scsi_da.h>
47 #include <cam/scsi/scsi_pass.h>
48 #include <cam/scsi/scsi_message.h>
50 #include "camcontrol.h"
53 CAM_CMD_NONE
= 0x00000000,
54 CAM_CMD_DEVLIST
= 0x00000001,
55 CAM_CMD_TUR
= 0x00000002,
56 CAM_CMD_INQUIRY
= 0x00000003,
57 CAM_CMD_STARTSTOP
= 0x00000004,
58 CAM_CMD_RESCAN
= 0x00000005,
59 CAM_CMD_READ_DEFECTS
= 0x00000006,
60 CAM_CMD_MODE_PAGE
= 0x00000007,
61 CAM_CMD_SCSI_CMD
= 0x00000008,
62 CAM_CMD_DEVTREE
= 0x00000009,
63 CAM_CMD_USAGE
= 0x0000000a,
64 CAM_CMD_DEBUG
= 0x0000000b,
65 CAM_CMD_RESET
= 0x0000000c,
66 CAM_CMD_FORMAT
= 0x0000000d,
67 CAM_CMD_TAG
= 0x0000000e,
68 CAM_CMD_RATE
= 0x0000000f,
69 CAM_CMD_DETACH
= 0x00000010,
70 CAM_CMD_REPORTLUNS
= 0x00000011,
71 CAM_CMD_READCAP
= 0x00000012
75 CAM_ARG_NONE
= 0x00000000,
76 CAM_ARG_VERBOSE
= 0x00000001,
77 CAM_ARG_DEVICE
= 0x00000002,
78 CAM_ARG_BUS
= 0x00000004,
79 CAM_ARG_TARGET
= 0x00000008,
80 CAM_ARG_LUN
= 0x00000010,
81 CAM_ARG_EJECT
= 0x00000020,
82 CAM_ARG_UNIT
= 0x00000040,
83 CAM_ARG_FORMAT_BLOCK
= 0x00000080,
84 CAM_ARG_FORMAT_BFI
= 0x00000100,
85 CAM_ARG_FORMAT_PHYS
= 0x00000200,
86 CAM_ARG_PLIST
= 0x00000400,
87 CAM_ARG_GLIST
= 0x00000800,
88 CAM_ARG_GET_SERIAL
= 0x00001000,
89 CAM_ARG_GET_STDINQ
= 0x00002000,
90 CAM_ARG_GET_XFERRATE
= 0x00004000,
91 CAM_ARG_INQ_MASK
= 0x00007000,
92 CAM_ARG_MODE_EDIT
= 0x00008000,
93 CAM_ARG_PAGE_CNTL
= 0x00010000,
94 CAM_ARG_TIMEOUT
= 0x00020000,
95 CAM_ARG_CMD_IN
= 0x00040000,
96 CAM_ARG_CMD_OUT
= 0x00080000,
97 CAM_ARG_DBD
= 0x00100000,
98 CAM_ARG_ERR_RECOVER
= 0x00200000,
99 CAM_ARG_RETRIES
= 0x00400000,
100 CAM_ARG_START_UNIT
= 0x00800000,
101 CAM_ARG_DEBUG_INFO
= 0x01000000,
102 CAM_ARG_DEBUG_TRACE
= 0x02000000,
103 CAM_ARG_DEBUG_SUBTRACE
= 0x04000000,
104 CAM_ARG_DEBUG_CDB
= 0x08000000,
105 CAM_ARG_DEBUG_XPT
= 0x10000000,
106 CAM_ARG_DEBUG_PERIPH
= 0x20000000,
109 struct camcontrol_opts
{
117 static const char scsicmd_opts
[] = "c:i:o:";
118 static const char readdefect_opts
[] = "f:GP";
119 static const char negotiate_opts
[] = "acD:O:qR:T:UW:";
122 struct camcontrol_opts option_table
[] = {
124 {"tur", CAM_CMD_TUR
, CAM_ARG_NONE
, NULL
},
125 {"inquiry", CAM_CMD_INQUIRY
, CAM_ARG_NONE
, "DSR"},
126 {"start", CAM_CMD_STARTSTOP
, CAM_ARG_START_UNIT
, NULL
},
127 {"stop", CAM_CMD_STARTSTOP
, CAM_ARG_NONE
, NULL
},
128 {"load", CAM_CMD_STARTSTOP
, CAM_ARG_START_UNIT
| CAM_ARG_EJECT
, NULL
},
129 {"eject", CAM_CMD_STARTSTOP
, CAM_ARG_EJECT
, NULL
},
130 {"reportluns", CAM_CMD_REPORTLUNS
, CAM_ARG_NONE
, "clr:"},
131 {"readcapacity", CAM_CMD_READCAP
, CAM_ARG_NONE
, "bhHNqs"},
132 #endif /* MINIMALISTIC */
133 {"rescan", CAM_CMD_RESCAN
, CAM_ARG_NONE
, NULL
},
134 {"reset", CAM_CMD_RESET
, CAM_ARG_NONE
, NULL
},
136 {"cmd", CAM_CMD_SCSI_CMD
, CAM_ARG_NONE
, scsicmd_opts
},
137 {"command", CAM_CMD_SCSI_CMD
, CAM_ARG_NONE
, scsicmd_opts
},
138 {"defects", CAM_CMD_READ_DEFECTS
, CAM_ARG_NONE
, readdefect_opts
},
139 {"defectlist", CAM_CMD_READ_DEFECTS
, CAM_ARG_NONE
, readdefect_opts
},
140 #endif /* MINIMALISTIC */
141 {"devlist", CAM_CMD_DEVTREE
, CAM_ARG_NONE
, NULL
},
143 {"periphlist", CAM_CMD_DEVLIST
, CAM_ARG_NONE
, NULL
},
144 {"modepage", CAM_CMD_MODE_PAGE
, CAM_ARG_NONE
, "bdelm:P:"},
145 {"tags", CAM_CMD_TAG
, CAM_ARG_NONE
, "N:q"},
146 {"negotiate", CAM_CMD_RATE
, CAM_ARG_NONE
, negotiate_opts
},
147 {"rate", CAM_CMD_RATE
, CAM_ARG_NONE
, negotiate_opts
},
148 {"debug", CAM_CMD_DEBUG
, CAM_ARG_NONE
, "IPTSXc"},
149 {"format", CAM_CMD_FORMAT
, CAM_ARG_NONE
, "qrwy"},
150 #endif /* MINIMALISTIC */
151 {"help", CAM_CMD_USAGE
, CAM_ARG_NONE
, NULL
},
152 {"-?", CAM_CMD_USAGE
, CAM_ARG_NONE
, NULL
},
153 {"-h", CAM_CMD_USAGE
, CAM_ARG_NONE
, NULL
},
165 int bus
, target
, lun
;
168 camcontrol_optret
getoption(char *, cam_cmdmask
*, cam_argmask
*,
171 static int getdevlist(struct cam_device
*);
172 static int getdevtree(void);
173 static int testunitready(struct cam_device
*, int, int, int);
174 static int scsistart(struct cam_device
*, int, int, int, int);
175 static int scsidoinquiry(struct cam_device
*, int, char **, char *, int,
177 static int scsiinquiry(struct cam_device
*, int, int);
178 static int scsiserial(struct cam_device
*, int, int);
179 static int scsixferrate(struct cam_device
*);
180 #endif /* MINIMALISTIC */
181 static int parse_btl(char *, int *, int *, int *, cam_argmask
*);
182 static int dorescan_or_reset(int, char **, int);
183 static int rescan_or_reset_bus(int, int);
184 static int scanlun_or_reset_dev(int, int, int, int);
186 static int readdefects(struct cam_device
*, int, char **, char *, int,
188 static void modepage(struct cam_device
*, int, char **, char *, int, int);
189 static int scsicmd(struct cam_device
*, int, char **, char *, int, int);
190 static int tagcontrol(struct cam_device
*, int, char **, char *);
191 static void cts_print(struct cam_device
*device
,
192 struct ccb_trans_settings
*);
193 static void cpi_print(struct ccb_pathinq
*);
194 static int get_cpi(struct cam_device
*, struct ccb_pathinq
*);
195 static int get_print_cts(struct cam_device
*, int, int,
196 struct ccb_trans_settings
*);
197 static int ratecontrol(struct cam_device
*, int, int, int, char **,
199 static int scsiformat(struct cam_device
*, int, char **, char *, int, int);
200 static int scsireportluns(struct cam_device
*device
, int argc
, char **argv
,
201 char *combinedopt
, int retry_count
, int timeout
);
202 static int scsireadcapacity(struct cam_device
*device
, int argc
,
203 char **argv
, char *combinedopt
,
204 int retry_count
, int timeout
);
205 #endif /* MINIMALISTIC */
209 getoption(char *arg
, cam_cmdmask
*cmdnum
, cam_argmask
*argnum
,
212 struct camcontrol_opts
*opts
;
215 for (opts
= option_table
; (opts
!= NULL
) && (opts
->optname
!= NULL
);
217 if (strncmp(opts
->optname
, arg
, strlen(arg
)) == 0) {
218 *cmdnum
= opts
->cmdnum
;
219 *argnum
= opts
->argnum
;
220 *subopt
= opts
->subopt
;
221 if (++num_matches
> 1)
222 return(CC_OR_AMBIGUOUS
);
229 return(CC_OR_NOT_FOUND
);
234 getdevlist(struct cam_device
*device
)
240 ccb
= cam_getccb(device
);
242 ccb
->ccb_h
.func_code
= XPT_GDEVLIST
;
243 ccb
->ccb_h
.flags
= CAM_DIR_NONE
;
244 ccb
->ccb_h
.retry_count
= 1;
246 ccb
->cgdl
.status
= CAM_GDEVLIST_MORE_DEVS
;
247 while (ccb
->cgdl
.status
== CAM_GDEVLIST_MORE_DEVS
) {
248 if (cam_send_ccb(device
, ccb
) < 0) {
249 perror("error getting device list");
256 switch (ccb
->cgdl
.status
) {
257 case CAM_GDEVLIST_MORE_DEVS
:
258 strcpy(status
, "MORE");
260 case CAM_GDEVLIST_LAST_DEVICE
:
261 strcpy(status
, "LAST");
263 case CAM_GDEVLIST_LIST_CHANGED
:
264 strcpy(status
, "CHANGED");
266 case CAM_GDEVLIST_ERROR
:
267 strcpy(status
, "ERROR");
272 fprintf(stdout
, "%s%d: generation: %d index: %d status: %s\n",
273 ccb
->cgdl
.periph_name
,
274 ccb
->cgdl
.unit_number
,
275 ccb
->cgdl
.generation
,
280 * If the list has changed, we need to start over from the
283 if (ccb
->cgdl
.status
== CAM_GDEVLIST_LIST_CHANGED
)
291 #endif /* MINIMALISTIC */
303 if ((fd
= open(XPT_DEVICE
, O_RDWR
)) == -1) {
304 warn("couldn't open %s", XPT_DEVICE
);
308 bzero(&ccb
, sizeof(union ccb
));
310 ccb
.ccb_h
.path_id
= CAM_XPT_PATH_ID
;
311 ccb
.ccb_h
.target_id
= CAM_TARGET_WILDCARD
;
312 ccb
.ccb_h
.target_lun
= CAM_LUN_WILDCARD
;
314 ccb
.ccb_h
.func_code
= XPT_DEV_MATCH
;
315 bufsize
= sizeof(struct dev_match_result
) * 100;
316 ccb
.cdm
.match_buf_len
= bufsize
;
317 ccb
.cdm
.matches
= (struct dev_match_result
*)malloc(bufsize
);
318 if (ccb
.cdm
.matches
== NULL
) {
319 warnx("can't malloc memory for matches");
323 ccb
.cdm
.num_matches
= 0;
326 * We fetch all nodes, since we display most of them in the default
327 * case, and all in the verbose case.
329 ccb
.cdm
.num_patterns
= 0;
330 ccb
.cdm
.pattern_buf_len
= 0;
333 * We do the ioctl multiple times if necessary, in case there are
334 * more than 100 nodes in the EDT.
337 if (ioctl(fd
, CAMIOCOMMAND
, &ccb
) == -1) {
338 warn("error sending CAMIOCOMMAND ioctl");
343 if ((ccb
.ccb_h
.status
!= CAM_REQ_CMP
)
344 || ((ccb
.cdm
.status
!= CAM_DEV_MATCH_LAST
)
345 && (ccb
.cdm
.status
!= CAM_DEV_MATCH_MORE
))) {
346 warnx("got CAM error %#x, CDM error %d\n",
347 ccb
.ccb_h
.status
, ccb
.cdm
.status
);
352 for (i
= 0; i
< ccb
.cdm
.num_matches
; i
++) {
353 switch (ccb
.cdm
.matches
[i
].type
) {
354 case DEV_MATCH_BUS
: {
355 struct bus_match_result
*bus_result
;
358 * Only print the bus information if the
359 * user turns on the verbose flag.
361 if ((arglist
& CAM_ARG_VERBOSE
) == 0)
365 &ccb
.cdm
.matches
[i
].result
.bus_result
;
368 fprintf(stdout
, ")\n");
372 fprintf(stdout
, "scbus%d on %s%d bus %d:\n",
374 bus_result
->dev_name
,
375 bus_result
->unit_number
,
379 case DEV_MATCH_DEVICE
: {
380 struct device_match_result
*dev_result
;
381 char vendor
[16], product
[48], revision
[16];
385 &ccb
.cdm
.matches
[i
].result
.device_result
;
387 if ((dev_result
->flags
388 & DEV_RESULT_UNCONFIGURED
)
389 && ((arglist
& CAM_ARG_VERBOSE
) == 0)) {
395 cam_strvis(vendor
, dev_result
->inq_data
.vendor
,
396 sizeof(dev_result
->inq_data
.vendor
),
399 dev_result
->inq_data
.product
,
400 sizeof(dev_result
->inq_data
.product
),
403 dev_result
->inq_data
.revision
,
404 sizeof(dev_result
->inq_data
.revision
),
406 sprintf(tmpstr
, "<%s %s %s>", vendor
, product
,
409 fprintf(stdout
, ")\n");
413 fprintf(stdout
, "%-33s at scbus%d "
414 "target %d lun %d (",
417 dev_result
->target_id
,
418 dev_result
->target_lun
);
424 case DEV_MATCH_PERIPH
: {
425 struct periph_match_result
*periph_result
;
428 &ccb
.cdm
.matches
[i
].result
.periph_result
;
430 if (skip_device
!= 0)
434 fprintf(stdout
, ",");
436 fprintf(stdout
, "%s%d",
437 periph_result
->periph_name
,
438 periph_result
->unit_number
);
444 fprintf(stdout
, "unknown match type\n");
449 } while ((ccb
.ccb_h
.status
== CAM_REQ_CMP
)
450 && (ccb
.cdm
.status
== CAM_DEV_MATCH_MORE
));
453 fprintf(stdout
, ")\n");
462 testunitready(struct cam_device
*device
, int retry_count
, int timeout
,
468 ccb
= cam_getccb(device
);
470 scsi_test_unit_ready(&ccb
->csio
,
471 /* retries */ retry_count
,
473 /* tag_action */ MSG_SIMPLE_Q_TAG
,
474 /* sense_len */ SSD_FULL_SIZE
,
475 /* timeout */ timeout
? timeout
: 5000);
477 /* Disable freezing the device queue */
478 ccb
->ccb_h
.flags
|= CAM_DEV_QFRZDIS
;
480 if (arglist
& CAM_ARG_ERR_RECOVER
)
481 ccb
->ccb_h
.flags
|= CAM_PASS_ERR_RECOVER
;
483 if (cam_send_ccb(device
, ccb
) < 0) {
485 perror("error sending test unit ready");
487 if (arglist
& CAM_ARG_VERBOSE
) {
488 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
489 CAM_EPF_ALL
, stderr
);
496 if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) == CAM_REQ_CMP
) {
498 fprintf(stdout
, "Unit is ready\n");
501 fprintf(stdout
, "Unit is not ready\n");
504 if (arglist
& CAM_ARG_VERBOSE
) {
505 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
506 CAM_EPF_ALL
, stderr
);
516 scsistart(struct cam_device
*device
, int startstop
, int loadeject
,
517 int retry_count
, int timeout
)
522 ccb
= cam_getccb(device
);
525 * If we're stopping, send an ordered tag so the drive in question
526 * will finish any previously queued writes before stopping. If
527 * the device isn't capable of tagged queueing, or if tagged
528 * queueing is turned off, the tag action is a no-op.
530 scsi_start_stop(&ccb
->csio
,
531 /* retries */ retry_count
,
533 /* tag_action */ startstop
? MSG_SIMPLE_Q_TAG
:
535 /* start/stop */ startstop
,
536 /* load_eject */ loadeject
,
538 /* sense_len */ SSD_FULL_SIZE
,
539 /* timeout */ timeout
? timeout
: 120000);
541 /* Disable freezing the device queue */
542 ccb
->ccb_h
.flags
|= CAM_DEV_QFRZDIS
;
544 if (arglist
& CAM_ARG_ERR_RECOVER
)
545 ccb
->ccb_h
.flags
|= CAM_PASS_ERR_RECOVER
;
547 if (cam_send_ccb(device
, ccb
) < 0) {
548 perror("error sending start unit");
550 if (arglist
& CAM_ARG_VERBOSE
) {
551 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
552 CAM_EPF_ALL
, stderr
);
559 if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) == CAM_REQ_CMP
)
561 fprintf(stdout
, "Unit started successfully");
563 fprintf(stdout
,", Media loaded\n");
565 fprintf(stdout
,"\n");
567 fprintf(stdout
, "Unit stopped successfully");
569 fprintf(stdout
, ", Media ejected\n");
571 fprintf(stdout
, "\n");
577 "Error received from start unit command\n");
580 "Error received from stop unit command\n");
582 if (arglist
& CAM_ARG_VERBOSE
) {
583 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
584 CAM_EPF_ALL
, stderr
);
594 scsidoinquiry(struct cam_device
*device
, int argc
, char **argv
,
595 char *combinedopt
, int retry_count
, int timeout
)
600 while ((c
= getopt(argc
, argv
, combinedopt
)) != -1) {
603 arglist
|= CAM_ARG_GET_STDINQ
;
606 arglist
|= CAM_ARG_GET_XFERRATE
;
609 arglist
|= CAM_ARG_GET_SERIAL
;
617 * If the user didn't specify any inquiry options, he wants all of
620 if ((arglist
& CAM_ARG_INQ_MASK
) == 0)
621 arglist
|= CAM_ARG_INQ_MASK
;
623 if (arglist
& CAM_ARG_GET_STDINQ
)
624 error
= scsiinquiry(device
, retry_count
, timeout
);
629 if (arglist
& CAM_ARG_GET_SERIAL
)
630 scsiserial(device
, retry_count
, timeout
);
635 if (arglist
& CAM_ARG_GET_XFERRATE
)
636 error
= scsixferrate(device
);
642 scsiinquiry(struct cam_device
*device
, int retry_count
, int timeout
)
645 struct scsi_inquiry_data
*inq_buf
;
648 ccb
= cam_getccb(device
);
651 warnx("couldn't allocate CCB");
655 /* cam_getccb cleans up the header, caller has to zero the payload */
656 bzero(&(&ccb
->ccb_h
)[1],
657 sizeof(struct ccb_scsiio
) - sizeof(struct ccb_hdr
));
659 inq_buf
= (struct scsi_inquiry_data
*)malloc(
660 sizeof(struct scsi_inquiry_data
));
662 if (inq_buf
== NULL
) {
664 warnx("can't malloc memory for inquiry\n");
667 bzero(inq_buf
, sizeof(*inq_buf
));
670 * Note that although the size of the inquiry buffer is the full
671 * 256 bytes specified in the SCSI spec, we only tell the device
672 * that we have allocated SHORT_INQUIRY_LENGTH bytes. There are
673 * two reasons for this:
675 * - The SCSI spec says that when a length field is only 1 byte,
676 * a value of 0 will be interpreted as 256. Therefore
677 * scsi_inquiry() will convert an inq_len (which is passed in as
678 * a u_int32_t, but the field in the CDB is only 1 byte) of 256
679 * to 0. Evidently, very few devices meet the spec in that
680 * regard. Some devices, like many Seagate disks, take the 0 as
681 * 0, and don't return any data. One Pioneer DVD-R drive
682 * returns more data than the command asked for.
684 * So, since there are numerous devices that just don't work
685 * right with the full inquiry size, we don't send the full size.
687 * - The second reason not to use the full inquiry data length is
688 * that we don't need it here. The only reason we issue a
689 * standard inquiry is to get the vendor name, device name,
690 * and revision so scsi_print_inquiry() can print them.
692 * If, at some point in the future, more inquiry data is needed for
693 * some reason, this code should use a procedure similar to the
694 * probe code. i.e., issue a short inquiry, and determine from
695 * the additional length passed back from the device how much
696 * inquiry data the device supports. Once the amount the device
697 * supports is determined, issue an inquiry for that amount and no
702 scsi_inquiry(&ccb
->csio
,
703 /* retries */ retry_count
,
705 /* tag_action */ MSG_SIMPLE_Q_TAG
,
706 /* inq_buf */ (u_int8_t
*)inq_buf
,
707 /* inq_len */ SHORT_INQUIRY_LENGTH
,
710 /* sense_len */ SSD_FULL_SIZE
,
711 /* timeout */ timeout
? timeout
: 5000);
713 /* Disable freezing the device queue */
714 ccb
->ccb_h
.flags
|= CAM_DEV_QFRZDIS
;
716 if (arglist
& CAM_ARG_ERR_RECOVER
)
717 ccb
->ccb_h
.flags
|= CAM_PASS_ERR_RECOVER
;
719 if (cam_send_ccb(device
, ccb
) < 0) {
720 perror("error sending SCSI inquiry");
722 if (arglist
& CAM_ARG_VERBOSE
) {
723 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
724 CAM_EPF_ALL
, stderr
);
731 if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
) {
734 if (arglist
& CAM_ARG_VERBOSE
) {
735 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
736 CAM_EPF_ALL
, stderr
);
747 fprintf(stdout
, "%s%d: ", device
->device_name
,
748 device
->dev_unit_num
);
749 scsi_print_inquiry(inq_buf
);
757 scsiserial(struct cam_device
*device
, int retry_count
, int timeout
)
760 struct scsi_vpd_unit_serial_number
*serial_buf
;
761 char serial_num
[SVPD_SERIAL_NUM_SIZE
+ 1];
764 ccb
= cam_getccb(device
);
767 warnx("couldn't allocate CCB");
771 /* cam_getccb cleans up the header, caller has to zero the payload */
772 bzero(&(&ccb
->ccb_h
)[1],
773 sizeof(struct ccb_scsiio
) - sizeof(struct ccb_hdr
));
775 serial_buf
= (struct scsi_vpd_unit_serial_number
*)
776 malloc(sizeof(*serial_buf
));
778 if (serial_buf
== NULL
) {
780 warnx("can't malloc memory for serial number");
784 scsi_inquiry(&ccb
->csio
,
785 /*retries*/ retry_count
,
787 /* tag_action */ MSG_SIMPLE_Q_TAG
,
788 /* inq_buf */ (u_int8_t
*)serial_buf
,
789 /* inq_len */ sizeof(*serial_buf
),
791 /* page_code */ SVPD_UNIT_SERIAL_NUMBER
,
792 /* sense_len */ SSD_FULL_SIZE
,
793 /* timeout */ timeout
? timeout
: 5000);
795 /* Disable freezing the device queue */
796 ccb
->ccb_h
.flags
|= CAM_DEV_QFRZDIS
;
798 if (arglist
& CAM_ARG_ERR_RECOVER
)
799 ccb
->ccb_h
.flags
|= CAM_PASS_ERR_RECOVER
;
801 if (cam_send_ccb(device
, ccb
) < 0) {
802 warn("error getting serial number");
804 if (arglist
& CAM_ARG_VERBOSE
) {
805 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
806 CAM_EPF_ALL
, stderr
);
814 if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
) {
817 if (arglist
& CAM_ARG_VERBOSE
) {
818 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
819 CAM_EPF_ALL
, stderr
);
830 bcopy(serial_buf
->serial_num
, serial_num
, serial_buf
->length
);
831 serial_num
[serial_buf
->length
] = '\0';
833 if ((arglist
& CAM_ARG_GET_STDINQ
)
834 || (arglist
& CAM_ARG_GET_XFERRATE
))
835 fprintf(stdout
, "%s%d: Serial Number ",
836 device
->device_name
, device
->dev_unit_num
);
838 fprintf(stdout
, "%.60s\n", serial_num
);
846 scsixferrate(struct cam_device
*device
)
854 ccb
= cam_getccb(device
);
857 warnx("couldn't allocate CCB");
861 bzero(&(&ccb
->ccb_h
)[1],
862 sizeof(struct ccb_trans_settings
) - sizeof(struct ccb_hdr
));
864 ccb
->ccb_h
.func_code
= XPT_GET_TRAN_SETTINGS
;
865 ccb
->cts
.type
= CTS_TYPE_CURRENT_SETTINGS
;
867 if (((retval
= cam_send_ccb(device
, ccb
)) < 0)
868 || ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
)) {
869 const char error_string
[] = "error getting transfer settings";
876 if (arglist
& CAM_ARG_VERBOSE
)
877 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
878 CAM_EPF_ALL
, stderr
);
882 goto xferrate_bailout
;
886 if (ccb
->cts
.transport
== XPORT_SPI
) {
887 struct ccb_trans_settings_spi
*spi
=
888 &ccb
->cts
.xport_specific
.spi
;
890 if ((spi
->valid
& CTS_SPI_VALID_SYNC_RATE
) != 0) {
891 freq
= scsi_calc_syncsrate(spi
->sync_period
);
895 fprintf(stdout
, "%s%d: ", device
->device_name
,
896 device
->dev_unit_num
);
898 if ((spi
->valid
& CTS_SPI_VALID_BUS_WIDTH
) != 0) {
899 speed
*= (0x01 << spi
->bus_width
);
905 fprintf(stdout
, "%d.%03dMB/s transfers ",
908 fprintf(stdout
, "%dKB/s transfers ",
911 if (((spi
->valid
& CTS_SPI_VALID_SYNC_OFFSET
) != 0)
912 && (spi
->sync_offset
!= 0))
913 fprintf(stdout
, "(%d.%03dMHz, offset %d", freq
/ 1000,
914 freq
% 1000, spi
->sync_offset
);
916 if (((spi
->valid
& CTS_SPI_VALID_BUS_WIDTH
) != 0)
917 && (spi
->bus_width
> 0)) {
918 if (((spi
->valid
& CTS_SPI_VALID_SYNC_OFFSET
) != 0)
919 && (spi
->sync_offset
!= 0)) {
920 fprintf(stdout
, ", ");
922 fprintf(stdout
, " (");
924 fprintf(stdout
, "%dbit)", 8 * (0x01 << spi
->bus_width
));
925 } else if (((spi
->valid
& CTS_SPI_VALID_SYNC_OFFSET
) != 0)
926 && (spi
->sync_offset
!= 0)) {
927 fprintf(stdout
, ")");
930 struct ccb_pathinq cpi
;
932 retval
= get_cpi(device
, &cpi
);
935 goto xferrate_bailout
;
937 speed
= cpi
.base_transfer_speed
;
943 fprintf(stdout
, "%d.%03dMB/s transfers ",
946 fprintf(stdout
, "%dKB/s transfers ",
950 if (ccb
->cts
.protocol
== PROTO_SCSI
) {
951 struct ccb_trans_settings_scsi
*scsi
=
952 &ccb
->cts
.proto_specific
.scsi
;
953 if (scsi
->valid
& CTS_SCSI_VALID_TQ
) {
954 if (scsi
->flags
& CTS_SCSI_FLAGS_TAG_ENB
) {
955 fprintf(stdout
, ", Command Queueing Enabled");
960 fprintf(stdout
, "\n");
968 #endif /* MINIMALISTIC */
971 * Parse out a bus, or a bus, target and lun in the following
977 * Returns the number of parsed components, or 0.
980 parse_btl(char *tstr
, int *mybus
, int *mytarget
, int *mylun
,
981 cam_argmask
*myarglist
)
986 while (isspace(*tstr
) && (*tstr
!= '\0'))
989 tmpstr
= (char *)strtok(tstr
, ":");
990 if ((tmpstr
!= NULL
) && (*tmpstr
!= '\0')) {
991 *mybus
= strtol(tmpstr
, NULL
, 0);
992 *myarglist
|= CAM_ARG_BUS
;
994 tmpstr
= (char *)strtok(NULL
, ":");
995 if ((tmpstr
!= NULL
) && (*tmpstr
!= '\0')) {
996 *mytarget
= strtol(tmpstr
, NULL
, 0);
997 *myarglist
|= CAM_ARG_TARGET
;
999 tmpstr
= (char *)strtok(NULL
, ":");
1000 if ((tmpstr
!= NULL
) && (*tmpstr
!= '\0')) {
1001 *mylun
= strtol(tmpstr
, NULL
, 0);
1002 *myarglist
|= CAM_ARG_LUN
;
1012 dorescan_or_reset(int argc
, char **argv
, int rescan
)
1014 static const char must
[] =
1015 "you must specify \"all\", a bus, or a bus:target:lun to %s";
1017 int mybus
= -1, mytarget
= -1, mylun
= -1;
1021 warnx(must
, rescan
? "rescan" : "reset");
1025 tstr
= argv
[optind
];
1026 while (isspace(*tstr
) && (*tstr
!= '\0'))
1028 if (strncasecmp(tstr
, "all", strlen("all")) == 0)
1029 arglist
|= CAM_ARG_BUS
;
1031 rv
= parse_btl(argv
[optind
], &mybus
, &mytarget
, &mylun
,
1033 if (rv
!= 1 && rv
!= 3) {
1034 warnx(must
, rescan
? "rescan" : "reset");
1039 if ((arglist
& CAM_ARG_BUS
)
1040 && (arglist
& CAM_ARG_TARGET
)
1041 && (arglist
& CAM_ARG_LUN
))
1042 error
= scanlun_or_reset_dev(mybus
, mytarget
, mylun
, rescan
);
1044 error
= rescan_or_reset_bus(mybus
, rescan
);
1050 rescan_or_reset_bus(int mybus
, int rescan
)
1052 union ccb ccb
, matchccb
;
1058 if ((fd
= open(XPT_DEVICE
, O_RDWR
)) < 0) {
1059 warnx("error opening transport layer device %s", XPT_DEVICE
);
1060 warn("%s", XPT_DEVICE
);
1065 ccb
.ccb_h
.func_code
= rescan
? XPT_SCAN_BUS
: XPT_RESET_BUS
;
1066 ccb
.ccb_h
.path_id
= mybus
;
1067 ccb
.ccb_h
.target_id
= CAM_TARGET_WILDCARD
;
1068 ccb
.ccb_h
.target_lun
= CAM_LUN_WILDCARD
;
1069 ccb
.crcn
.flags
= CAM_FLAG_NONE
;
1071 /* run this at a low priority */
1072 ccb
.ccb_h
.pinfo
.priority
= 5;
1074 if (ioctl(fd
, CAMIOCOMMAND
, &ccb
) == -1) {
1075 warn("CAMIOCOMMAND ioctl failed");
1080 if ((ccb
.ccb_h
.status
& CAM_STATUS_MASK
) == CAM_REQ_CMP
) {
1081 fprintf(stdout
, "%s of bus %d was successful\n",
1082 rescan
? "Re-scan" : "Reset", mybus
);
1084 fprintf(stdout
, "%s of bus %d returned error %#x\n",
1085 rescan
? "Re-scan" : "Reset", mybus
,
1086 ccb
.ccb_h
.status
& CAM_STATUS_MASK
);
1097 * The right way to handle this is to modify the xpt so that it can
1098 * handle a wildcarded bus in a rescan or reset CCB. At the moment
1099 * that isn't implemented, so instead we enumerate the busses and
1100 * send the rescan or reset to those busses in the case where the
1101 * given bus is -1 (wildcard). We don't send a rescan or reset
1102 * to the xpt bus; sending a rescan to the xpt bus is effectively a
1103 * no-op, sending a rescan to the xpt bus would result in a status of
1106 bzero(&(&matchccb
.ccb_h
)[1],
1107 sizeof(struct ccb_dev_match
) - sizeof(struct ccb_hdr
));
1108 matchccb
.ccb_h
.func_code
= XPT_DEV_MATCH
;
1109 bufsize
= sizeof(struct dev_match_result
) * 20;
1110 matchccb
.cdm
.match_buf_len
= bufsize
;
1111 matchccb
.cdm
.matches
=(struct dev_match_result
*)malloc(bufsize
);
1112 if (matchccb
.cdm
.matches
== NULL
) {
1113 warnx("can't malloc memory for matches");
1117 matchccb
.cdm
.num_matches
= 0;
1119 matchccb
.cdm
.num_patterns
= 1;
1120 matchccb
.cdm
.pattern_buf_len
= sizeof(struct dev_match_pattern
);
1122 matchccb
.cdm
.patterns
= (struct dev_match_pattern
*)malloc(
1123 matchccb
.cdm
.pattern_buf_len
);
1124 if (matchccb
.cdm
.patterns
== NULL
) {
1125 warnx("can't malloc memory for patterns");
1129 matchccb
.cdm
.patterns
[0].type
= DEV_MATCH_BUS
;
1130 matchccb
.cdm
.patterns
[0].pattern
.bus_pattern
.flags
= BUS_MATCH_ANY
;
1135 if (ioctl(fd
, CAMIOCOMMAND
, &matchccb
) == -1) {
1136 warn("CAMIOCOMMAND ioctl failed");
1141 if ((matchccb
.ccb_h
.status
!= CAM_REQ_CMP
)
1142 || ((matchccb
.cdm
.status
!= CAM_DEV_MATCH_LAST
)
1143 && (matchccb
.cdm
.status
!= CAM_DEV_MATCH_MORE
))) {
1144 warnx("got CAM error %#x, CDM error %d\n",
1145 matchccb
.ccb_h
.status
, matchccb
.cdm
.status
);
1150 for (i
= 0; i
< matchccb
.cdm
.num_matches
; i
++) {
1151 struct bus_match_result
*bus_result
;
1153 /* This shouldn't happen. */
1154 if (matchccb
.cdm
.matches
[i
].type
!= DEV_MATCH_BUS
)
1157 bus_result
= &matchccb
.cdm
.matches
[i
].result
.bus_result
;
1160 * We don't want to rescan or reset the xpt bus.
1163 if ((int)bus_result
->path_id
== -1)
1166 ccb
.ccb_h
.func_code
= rescan
? XPT_SCAN_BUS
:
1168 ccb
.ccb_h
.path_id
= bus_result
->path_id
;
1169 ccb
.ccb_h
.target_id
= CAM_TARGET_WILDCARD
;
1170 ccb
.ccb_h
.target_lun
= CAM_LUN_WILDCARD
;
1171 ccb
.crcn
.flags
= CAM_FLAG_NONE
;
1173 /* run this at a low priority */
1174 ccb
.ccb_h
.pinfo
.priority
= 5;
1176 if (ioctl(fd
, CAMIOCOMMAND
, &ccb
) == -1) {
1177 warn("CAMIOCOMMAND ioctl failed");
1182 if ((ccb
.ccb_h
.status
& CAM_STATUS_MASK
) ==CAM_REQ_CMP
){
1183 fprintf(stdout
, "%s of bus %d was successful\n",
1184 rescan
? "Re-scan" : "Reset",
1185 bus_result
->path_id
);
1188 * Don't bail out just yet, maybe the other
1189 * rescan or reset commands will complete
1192 fprintf(stderr
, "%s of bus %d returned error "
1193 "%#x\n", rescan
? "Re-scan" : "Reset",
1194 bus_result
->path_id
,
1195 ccb
.ccb_h
.status
& CAM_STATUS_MASK
);
1199 } while ((matchccb
.ccb_h
.status
== CAM_REQ_CMP
)
1200 && (matchccb
.cdm
.status
== CAM_DEV_MATCH_MORE
));
1207 if (matchccb
.cdm
.patterns
!= NULL
)
1208 free(matchccb
.cdm
.patterns
);
1209 if (matchccb
.cdm
.matches
!= NULL
)
1210 free(matchccb
.cdm
.matches
);
1216 scanlun_or_reset_dev(int mybus
, int mytarget
, int mylun
, int scan
)
1219 struct cam_device
*device
;
1225 warnx("invalid bus number %d", mybus
);
1230 warnx("invalid target number %d", mytarget
);
1235 warnx("invalid lun number %d", mylun
);
1241 bzero(&ccb
, sizeof(union ccb
));
1244 if ((fd
= open(XPT_DEVICE
, O_RDWR
)) < 0) {
1245 warnx("error opening transport layer device %s\n",
1247 warn("%s", XPT_DEVICE
);
1251 device
= cam_open_btl(mybus
, mytarget
, mylun
, O_RDWR
, NULL
);
1252 if (device
== NULL
) {
1253 warnx("%s", cam_errbuf
);
1258 ccb
.ccb_h
.func_code
= (scan
)? XPT_SCAN_LUN
: XPT_RESET_DEV
;
1259 ccb
.ccb_h
.path_id
= mybus
;
1260 ccb
.ccb_h
.target_id
= mytarget
;
1261 ccb
.ccb_h
.target_lun
= mylun
;
1262 ccb
.ccb_h
.timeout
= 5000;
1263 ccb
.crcn
.flags
= CAM_FLAG_NONE
;
1265 /* run this at a low priority */
1266 ccb
.ccb_h
.pinfo
.priority
= 5;
1269 if (ioctl(fd
, CAMIOCOMMAND
, &ccb
) < 0) {
1270 warn("CAMIOCOMMAND ioctl failed");
1275 if (cam_send_ccb(device
, &ccb
) < 0) {
1276 warn("error sending XPT_RESET_DEV CCB");
1277 cam_close_device(device
);
1285 cam_close_device(device
);
1288 * An error code of CAM_BDR_SENT is normal for a BDR request.
1290 if (((ccb
.ccb_h
.status
& CAM_STATUS_MASK
) == CAM_REQ_CMP
)
1292 && ((ccb
.ccb_h
.status
& CAM_STATUS_MASK
) == CAM_BDR_SENT
))) {
1293 fprintf(stdout
, "%s of %d:%d:%d was successful\n",
1294 scan
? "Re-scan" : "Reset", mybus
, mytarget
, mylun
);
1297 fprintf(stdout
, "%s of %d:%d:%d returned error %#x\n",
1298 scan
? "Re-scan" : "Reset", mybus
, mytarget
, mylun
,
1299 ccb
.ccb_h
.status
& CAM_STATUS_MASK
);
1304 #ifndef MINIMALISTIC
1306 readdefects(struct cam_device
*device
, int argc
, char **argv
,
1307 char *combinedopt
, int retry_count
, int timeout
)
1309 union ccb
*ccb
= NULL
;
1310 struct scsi_read_defect_data_10
*rdd_cdb
;
1311 u_int8_t
*defect_list
= NULL
;
1312 u_int32_t dlist_length
= 65000;
1313 u_int32_t returned_length
= 0;
1314 u_int32_t num_returned
= 0;
1315 u_int8_t returned_format
;
1318 int lists_specified
= 0;
1320 while ((c
= getopt(argc
, argv
, combinedopt
)) != -1) {
1326 while (isspace(*tstr
) && (*tstr
!= '\0'))
1328 if (strcmp(tstr
, "block") == 0)
1329 arglist
|= CAM_ARG_FORMAT_BLOCK
;
1330 else if (strcmp(tstr
, "bfi") == 0)
1331 arglist
|= CAM_ARG_FORMAT_BFI
;
1332 else if (strcmp(tstr
, "phys") == 0)
1333 arglist
|= CAM_ARG_FORMAT_PHYS
;
1336 warnx("invalid defect format %s", tstr
);
1337 goto defect_bailout
;
1342 arglist
|= CAM_ARG_GLIST
;
1345 arglist
|= CAM_ARG_PLIST
;
1352 ccb
= cam_getccb(device
);
1355 * Hopefully 65000 bytes is enough to hold the defect list. If it
1356 * isn't, the disk is probably dead already. We'd have to go with
1357 * 12 byte command (i.e. alloc_length is 32 bits instead of 16)
1360 defect_list
= malloc(dlist_length
);
1361 if (defect_list
== NULL
) {
1362 warnx("can't malloc memory for defect list");
1364 goto defect_bailout
;
1367 rdd_cdb
=(struct scsi_read_defect_data_10
*)&ccb
->csio
.cdb_io
.cdb_bytes
;
1370 * cam_getccb() zeros the CCB header only. So we need to zero the
1371 * payload portion of the ccb.
1373 bzero(&(&ccb
->ccb_h
)[1],
1374 sizeof(struct ccb_scsiio
) - sizeof(struct ccb_hdr
));
1376 cam_fill_csio(&ccb
->csio
,
1377 /*retries*/ retry_count
,
1379 /*flags*/ CAM_DIR_IN
| ((arglist
& CAM_ARG_ERR_RECOVER
) ?
1380 CAM_PASS_ERR_RECOVER
: 0),
1381 /*tag_action*/ MSG_SIMPLE_Q_TAG
,
1382 /*data_ptr*/ defect_list
,
1383 /*dxfer_len*/ dlist_length
,
1384 /*sense_len*/ SSD_FULL_SIZE
,
1385 /*cdb_len*/ sizeof(struct scsi_read_defect_data_10
),
1386 /*timeout*/ timeout
? timeout
: 5000);
1388 rdd_cdb
->opcode
= READ_DEFECT_DATA_10
;
1389 if (arglist
& CAM_ARG_FORMAT_BLOCK
)
1390 rdd_cdb
->format
= SRDD10_BLOCK_FORMAT
;
1391 else if (arglist
& CAM_ARG_FORMAT_BFI
)
1392 rdd_cdb
->format
= SRDD10_BYTES_FROM_INDEX_FORMAT
;
1393 else if (arglist
& CAM_ARG_FORMAT_PHYS
)
1394 rdd_cdb
->format
= SRDD10_PHYSICAL_SECTOR_FORMAT
;
1397 warnx("no defect list format specified");
1398 goto defect_bailout
;
1400 if (arglist
& CAM_ARG_PLIST
) {
1401 rdd_cdb
->format
|= SRDD10_PLIST
;
1405 if (arglist
& CAM_ARG_GLIST
) {
1406 rdd_cdb
->format
|= SRDD10_GLIST
;
1410 scsi_ulto2b(dlist_length
, rdd_cdb
->alloc_length
);
1412 /* Disable freezing the device queue */
1413 ccb
->ccb_h
.flags
|= CAM_DEV_QFRZDIS
;
1415 if (cam_send_ccb(device
, ccb
) < 0) {
1416 perror("error reading defect list");
1418 if (arglist
& CAM_ARG_VERBOSE
) {
1419 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
1420 CAM_EPF_ALL
, stderr
);
1424 goto defect_bailout
;
1427 returned_length
= scsi_2btoul(((struct
1428 scsi_read_defect_data_hdr_10
*)defect_list
)->length
);
1430 returned_format
= ((struct scsi_read_defect_data_hdr_10
*)
1431 defect_list
)->format
;
1433 if (((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) == CAM_SCSI_STATUS_ERROR
)
1434 && (ccb
->csio
.scsi_status
== SCSI_STATUS_CHECK_COND
)
1435 && ((ccb
->ccb_h
.status
& CAM_AUTOSNS_VALID
) != 0)) {
1436 struct scsi_sense_data
*sense
;
1437 int error_code
, sense_key
, asc
, ascq
;
1439 sense
= &ccb
->csio
.sense_data
;
1440 scsi_extract_sense(sense
, &error_code
, &sense_key
, &asc
, &ascq
);
1443 * According to the SCSI spec, if the disk doesn't support
1444 * the requested format, it will generally return a sense
1445 * key of RECOVERED ERROR, and an additional sense code
1446 * of "DEFECT LIST NOT FOUND". So, we check for that, and
1447 * also check to make sure that the returned length is
1448 * greater than 0, and then print out whatever format the
1451 if ((sense_key
== SSD_KEY_RECOVERED_ERROR
)
1452 && (asc
== 0x1c) && (ascq
== 0x00)
1453 && (returned_length
> 0)) {
1454 warnx("requested defect format not available");
1455 switch(returned_format
& SRDDH10_DLIST_FORMAT_MASK
) {
1456 case SRDD10_BLOCK_FORMAT
:
1457 warnx("Device returned block format");
1459 case SRDD10_BYTES_FROM_INDEX_FORMAT
:
1460 warnx("Device returned bytes from index"
1463 case SRDD10_PHYSICAL_SECTOR_FORMAT
:
1464 warnx("Device returned physical sector format");
1468 warnx("Device returned unknown defect"
1469 " data format %#x", returned_format
);
1470 goto defect_bailout
;
1471 break; /* NOTREACHED */
1475 warnx("Error returned from read defect data command");
1476 if (arglist
& CAM_ARG_VERBOSE
)
1477 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
1478 CAM_EPF_ALL
, stderr
);
1479 goto defect_bailout
;
1481 } else if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
) {
1483 warnx("Error returned from read defect data command");
1484 if (arglist
& CAM_ARG_VERBOSE
)
1485 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
1486 CAM_EPF_ALL
, stderr
);
1487 goto defect_bailout
;
1491 * XXX KDM I should probably clean up the printout format for the
1494 switch (returned_format
& SRDDH10_DLIST_FORMAT_MASK
){
1495 case SRDDH10_PHYSICAL_SECTOR_FORMAT
:
1497 struct scsi_defect_desc_phys_sector
*dlist
;
1499 dlist
= (struct scsi_defect_desc_phys_sector
*)
1501 sizeof(struct scsi_read_defect_data_hdr_10
));
1503 num_returned
= returned_length
/
1504 sizeof(struct scsi_defect_desc_phys_sector
);
1506 fprintf(stderr
, "Got %d defect", num_returned
);
1508 if ((lists_specified
== 0) || (num_returned
== 0)) {
1509 fprintf(stderr
, "s.\n");
1511 } else if (num_returned
== 1)
1512 fprintf(stderr
, ":\n");
1514 fprintf(stderr
, "s:\n");
1516 for (i
= 0; i
< num_returned
; i
++) {
1517 fprintf(stdout
, "%d:%d:%d\n",
1518 scsi_3btoul(dlist
[i
].cylinder
),
1520 scsi_4btoul(dlist
[i
].sector
));
1524 case SRDDH10_BYTES_FROM_INDEX_FORMAT
:
1526 struct scsi_defect_desc_bytes_from_index
*dlist
;
1528 dlist
= (struct scsi_defect_desc_bytes_from_index
*)
1530 sizeof(struct scsi_read_defect_data_hdr_10
));
1532 num_returned
= returned_length
/
1533 sizeof(struct scsi_defect_desc_bytes_from_index
);
1535 fprintf(stderr
, "Got %d defect", num_returned
);
1537 if ((lists_specified
== 0) || (num_returned
== 0)) {
1538 fprintf(stderr
, "s.\n");
1540 } else if (num_returned
== 1)
1541 fprintf(stderr
, ":\n");
1543 fprintf(stderr
, "s:\n");
1545 for (i
= 0; i
< num_returned
; i
++) {
1546 fprintf(stdout
, "%d:%d:%d\n",
1547 scsi_3btoul(dlist
[i
].cylinder
),
1549 scsi_4btoul(dlist
[i
].bytes_from_index
));
1553 case SRDDH10_BLOCK_FORMAT
:
1555 struct scsi_defect_desc_block
*dlist
;
1557 dlist
= (struct scsi_defect_desc_block
*)(defect_list
+
1558 sizeof(struct scsi_read_defect_data_hdr_10
));
1560 num_returned
= returned_length
/
1561 sizeof(struct scsi_defect_desc_block
);
1563 fprintf(stderr
, "Got %d defect", num_returned
);
1565 if ((lists_specified
== 0) || (num_returned
== 0)) {
1566 fprintf(stderr
, "s.\n");
1568 } else if (num_returned
== 1)
1569 fprintf(stderr
, ":\n");
1571 fprintf(stderr
, "s:\n");
1573 for (i
= 0; i
< num_returned
; i
++)
1574 fprintf(stdout
, "%u\n",
1575 scsi_4btoul(dlist
[i
].address
));
1579 fprintf(stderr
, "Unknown defect format %d\n",
1580 returned_format
& SRDDH10_DLIST_FORMAT_MASK
);
1586 if (defect_list
!= NULL
)
1594 #endif /* MINIMALISTIC */
1598 reassignblocks(struct cam_device
*device
, u_int32_t
*blocks
, int num_blocks
)
1602 ccb
= cam_getccb(device
);
1608 #ifndef MINIMALISTIC
1610 mode_sense(struct cam_device
*device
, int mode_page
, int page_control
,
1611 int dbd
, int retry_count
, int timeout
, u_int8_t
*data
, int datalen
)
1616 ccb
= cam_getccb(device
);
1619 errx(1, "mode_sense: couldn't allocate CCB");
1621 bzero(&(&ccb
->ccb_h
)[1],
1622 sizeof(struct ccb_scsiio
) - sizeof(struct ccb_hdr
));
1624 scsi_mode_sense(&ccb
->csio
,
1625 /* retries */ retry_count
,
1627 /* tag_action */ MSG_SIMPLE_Q_TAG
,
1629 /* page_code */ page_control
<< 6,
1630 /* page */ mode_page
,
1631 /* param_buf */ data
,
1632 /* param_len */ datalen
,
1633 /* sense_len */ SSD_FULL_SIZE
,
1634 /* timeout */ timeout
? timeout
: 5000);
1636 if (arglist
& CAM_ARG_ERR_RECOVER
)
1637 ccb
->ccb_h
.flags
|= CAM_PASS_ERR_RECOVER
;
1639 /* Disable freezing the device queue */
1640 ccb
->ccb_h
.flags
|= CAM_DEV_QFRZDIS
;
1642 if (((retval
= cam_send_ccb(device
, ccb
)) < 0)
1643 || ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
)) {
1644 if (arglist
& CAM_ARG_VERBOSE
) {
1645 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
1646 CAM_EPF_ALL
, stderr
);
1649 cam_close_device(device
);
1651 err(1, "error sending mode sense command");
1653 errx(1, "error sending mode sense command");
1660 mode_select(struct cam_device
*device
, int save_pages
, int retry_count
,
1661 int timeout
, u_int8_t
*data
, int datalen
)
1666 ccb
= cam_getccb(device
);
1669 errx(1, "mode_select: couldn't allocate CCB");
1671 bzero(&(&ccb
->ccb_h
)[1],
1672 sizeof(struct ccb_scsiio
) - sizeof(struct ccb_hdr
));
1674 scsi_mode_select(&ccb
->csio
,
1675 /* retries */ retry_count
,
1677 /* tag_action */ MSG_SIMPLE_Q_TAG
,
1678 /* scsi_page_fmt */ 1,
1679 /* save_pages */ save_pages
,
1680 /* param_buf */ data
,
1681 /* param_len */ datalen
,
1682 /* sense_len */ SSD_FULL_SIZE
,
1683 /* timeout */ timeout
? timeout
: 5000);
1685 if (arglist
& CAM_ARG_ERR_RECOVER
)
1686 ccb
->ccb_h
.flags
|= CAM_PASS_ERR_RECOVER
;
1688 /* Disable freezing the device queue */
1689 ccb
->ccb_h
.flags
|= CAM_DEV_QFRZDIS
;
1691 if (((retval
= cam_send_ccb(device
, ccb
)) < 0)
1692 || ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
)) {
1693 if (arglist
& CAM_ARG_VERBOSE
) {
1694 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
1695 CAM_EPF_ALL
, stderr
);
1698 cam_close_device(device
);
1701 err(1, "error sending mode select command");
1703 errx(1, "error sending mode select command");
1711 modepage(struct cam_device
*device
, int argc
, char **argv
, char *combinedopt
,
1712 int retry_count
, int timeout
)
1714 int c
, mode_page
= -1, page_control
= 0;
1715 int binary
= 0, list
= 0;
1717 while ((c
= getopt(argc
, argv
, combinedopt
)) != -1) {
1723 arglist
|= CAM_ARG_DBD
;
1726 arglist
|= CAM_ARG_MODE_EDIT
;
1732 mode_page
= strtol(optarg
, NULL
, 0);
1734 errx(1, "invalid mode page %d", mode_page
);
1737 page_control
= strtol(optarg
, NULL
, 0);
1738 if ((page_control
< 0) || (page_control
> 3))
1739 errx(1, "invalid page control field %d",
1741 arglist
|= CAM_ARG_PAGE_CNTL
;
1748 if (mode_page
== -1 && list
== 0)
1749 errx(1, "you must specify a mode page!");
1752 mode_list(device
, page_control
, arglist
& CAM_ARG_DBD
,
1753 retry_count
, timeout
);
1755 mode_edit(device
, mode_page
, page_control
,
1756 arglist
& CAM_ARG_DBD
, arglist
& CAM_ARG_MODE_EDIT
, binary
,
1757 retry_count
, timeout
);
1762 scsicmd(struct cam_device
*device
, int argc
, char **argv
, char *combinedopt
,
1763 int retry_count
, int timeout
)
1766 u_int32_t flags
= CAM_DIR_NONE
;
1767 u_int8_t
*data_ptr
= NULL
;
1769 struct get_hook hook
;
1770 int c
, data_bytes
= 0;
1772 char *datastr
= NULL
, *tstr
;
1777 ccb
= cam_getccb(device
);
1780 warnx("scsicmd: error allocating ccb");
1784 bzero(&(&ccb
->ccb_h
)[1],
1785 sizeof(struct ccb_scsiio
) - sizeof(struct ccb_hdr
));
1787 while ((c
= getopt(argc
, argv
, combinedopt
)) != -1) {
1791 while (isspace(*tstr
) && (*tstr
!= '\0'))
1793 hook
.argc
= argc
- optind
;
1794 hook
.argv
= argv
+ optind
;
1796 cdb_len
= buff_encode_visit(cdb
, sizeof(cdb
), tstr
,
1799 * Increment optind by the number of arguments the
1800 * encoding routine processed. After each call to
1801 * getopt(3), optind points to the argument that
1802 * getopt should process _next_. In this case,
1803 * that means it points to the first command string
1804 * argument, if there is one. Once we increment
1805 * this, it should point to either the next command
1806 * line argument, or it should be past the end of
1812 if (arglist
& CAM_ARG_CMD_OUT
) {
1813 warnx("command must either be "
1814 "read or write, not both");
1816 goto scsicmd_bailout
;
1818 arglist
|= CAM_ARG_CMD_IN
;
1820 data_bytes
= strtol(optarg
, NULL
, 0);
1821 if (data_bytes
<= 0) {
1822 warnx("invalid number of input bytes %d",
1825 goto scsicmd_bailout
;
1827 hook
.argc
= argc
- optind
;
1828 hook
.argv
= argv
+ optind
;
1831 datastr
= cget(&hook
, NULL
);
1833 * If the user supplied "-" instead of a format, he
1834 * wants the data to be written to stdout.
1836 if ((datastr
!= NULL
)
1837 && (datastr
[0] == '-'))
1840 data_ptr
= (u_int8_t
*)malloc(data_bytes
);
1841 if (data_ptr
== NULL
) {
1842 warnx("can't malloc memory for data_ptr");
1844 goto scsicmd_bailout
;
1848 if (arglist
& CAM_ARG_CMD_IN
) {
1849 warnx("command must either be "
1850 "read or write, not both");
1852 goto scsicmd_bailout
;
1854 arglist
|= CAM_ARG_CMD_OUT
;
1855 flags
= CAM_DIR_OUT
;
1856 data_bytes
= strtol(optarg
, NULL
, 0);
1857 if (data_bytes
<= 0) {
1858 warnx("invalid number of output bytes %d",
1861 goto scsicmd_bailout
;
1863 hook
.argc
= argc
- optind
;
1864 hook
.argv
= argv
+ optind
;
1866 datastr
= cget(&hook
, NULL
);
1867 data_ptr
= (u_int8_t
*)malloc(data_bytes
);
1868 if (data_ptr
== NULL
) {
1869 warnx("can't malloc memory for data_ptr");
1871 goto scsicmd_bailout
;
1874 * If the user supplied "-" instead of a format, he
1875 * wants the data to be read from stdin.
1877 if ((datastr
!= NULL
)
1878 && (datastr
[0] == '-'))
1881 buff_encode_visit(data_ptr
, data_bytes
, datastr
,
1891 * If fd_data is set, and we're writing to the device, we need to
1892 * read the data the user wants written from stdin.
1894 if ((fd_data
== 1) && (arglist
& CAM_ARG_CMD_OUT
)) {
1896 int amt_to_read
= data_bytes
;
1897 u_int8_t
*buf_ptr
= data_ptr
;
1899 for (amt_read
= 0; amt_to_read
> 0;
1900 amt_read
= read(STDIN_FILENO
, buf_ptr
, amt_to_read
)) {
1901 if (amt_read
== -1) {
1902 warn("error reading data from stdin");
1904 goto scsicmd_bailout
;
1906 amt_to_read
-= amt_read
;
1907 buf_ptr
+= amt_read
;
1911 if (arglist
& CAM_ARG_ERR_RECOVER
)
1912 flags
|= CAM_PASS_ERR_RECOVER
;
1914 /* Disable freezing the device queue */
1915 flags
|= CAM_DEV_QFRZDIS
;
1918 * This is taken from the SCSI-3 draft spec.
1919 * (T10/1157D revision 0.3)
1920 * The top 3 bits of an opcode are the group code. The next 5 bits
1921 * are the command code.
1922 * Group 0: six byte commands
1923 * Group 1: ten byte commands
1924 * Group 2: ten byte commands
1926 * Group 4: sixteen byte commands
1927 * Group 5: twelve byte commands
1928 * Group 6: vendor specific
1929 * Group 7: vendor specific
1931 switch((cdb
[0] >> 5) & 0x7) {
1942 /* computed by buff_encode_visit */
1953 * We should probably use csio_build_visit or something like that
1954 * here, but it's easier to encode arguments as you go. The
1955 * alternative would be skipping the CDB argument and then encoding
1956 * it here, since we've got the data buffer argument by now.
1958 bcopy(cdb
, &ccb
->csio
.cdb_io
.cdb_bytes
, cdb_len
);
1960 cam_fill_csio(&ccb
->csio
,
1961 /*retries*/ retry_count
,
1964 /*tag_action*/ MSG_SIMPLE_Q_TAG
,
1965 /*data_ptr*/ data_ptr
,
1966 /*dxfer_len*/ data_bytes
,
1967 /*sense_len*/ SSD_FULL_SIZE
,
1968 /*cdb_len*/ cdb_len
,
1969 /*timeout*/ timeout
? timeout
: 5000);
1971 if (((retval
= cam_send_ccb(device
, ccb
)) < 0)
1972 || ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
)) {
1974 warn("error sending command");
1976 warnx("error sending command");
1978 if (arglist
& CAM_ARG_VERBOSE
) {
1979 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
1980 CAM_EPF_ALL
, stderr
);
1984 goto scsicmd_bailout
;
1988 if (((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) == CAM_REQ_CMP
)
1989 && (arglist
& CAM_ARG_CMD_IN
)
1990 && (data_bytes
> 0)) {
1992 buff_decode_visit(data_ptr
, data_bytes
, datastr
,
1994 fprintf(stdout
, "\n");
1996 ssize_t amt_written
;
1997 int amt_to_write
= data_bytes
;
1998 u_int8_t
*buf_ptr
= data_ptr
;
2000 for (amt_written
= 0; (amt_to_write
> 0) &&
2001 (amt_written
=write(1, buf_ptr
,amt_to_write
))> 0;){
2002 amt_to_write
-= amt_written
;
2003 buf_ptr
+= amt_written
;
2005 if (amt_written
== -1) {
2006 warn("error writing data to stdout");
2008 goto scsicmd_bailout
;
2009 } else if ((amt_written
== 0)
2010 && (amt_to_write
> 0)) {
2011 warnx("only wrote %u bytes out of %u",
2012 data_bytes
- amt_to_write
, data_bytes
);
2019 if ((data_bytes
> 0) && (data_ptr
!= NULL
))
2028 camdebug(int argc
, char **argv
, char *combinedopt
)
2031 int mybus
= -1, mytarget
= -1, mylun
= -1;
2032 char *tstr
, *tmpstr
= NULL
;
2036 bzero(&ccb
, sizeof(union ccb
));
2038 while ((c
= getopt(argc
, argv
, combinedopt
)) != -1) {
2041 arglist
|= CAM_ARG_DEBUG_INFO
;
2042 ccb
.cdbg
.flags
|= CAM_DEBUG_INFO
;
2045 arglist
|= CAM_ARG_DEBUG_PERIPH
;
2046 ccb
.cdbg
.flags
|= CAM_DEBUG_PERIPH
;
2049 arglist
|= CAM_ARG_DEBUG_SUBTRACE
;
2050 ccb
.cdbg
.flags
|= CAM_DEBUG_SUBTRACE
;
2053 arglist
|= CAM_ARG_DEBUG_TRACE
;
2054 ccb
.cdbg
.flags
|= CAM_DEBUG_TRACE
;
2057 arglist
|= CAM_ARG_DEBUG_XPT
;
2058 ccb
.cdbg
.flags
|= CAM_DEBUG_XPT
;
2061 arglist
|= CAM_ARG_DEBUG_CDB
;
2062 ccb
.cdbg
.flags
|= CAM_DEBUG_CDB
;
2069 if ((fd
= open(XPT_DEVICE
, O_RDWR
)) < 0) {
2070 warnx("error opening transport layer device %s", XPT_DEVICE
);
2071 warn("%s", XPT_DEVICE
);
2078 warnx("you must specify \"off\", \"all\" or a bus,");
2079 warnx("bus:target, or bus:target:lun");
2086 while (isspace(*tstr
) && (*tstr
!= '\0'))
2089 if (strncmp(tstr
, "off", 3) == 0) {
2090 ccb
.cdbg
.flags
= CAM_DEBUG_NONE
;
2091 arglist
&= ~(CAM_ARG_DEBUG_INFO
|CAM_ARG_DEBUG_PERIPH
|
2092 CAM_ARG_DEBUG_TRACE
|CAM_ARG_DEBUG_SUBTRACE
|
2094 } else if (strncmp(tstr
, "all", 3) != 0) {
2095 tmpstr
= (char *)strtok(tstr
, ":");
2096 if ((tmpstr
!= NULL
) && (*tmpstr
!= '\0')){
2097 mybus
= strtol(tmpstr
, NULL
, 0);
2098 arglist
|= CAM_ARG_BUS
;
2099 tmpstr
= (char *)strtok(NULL
, ":");
2100 if ((tmpstr
!= NULL
) && (*tmpstr
!= '\0')){
2101 mytarget
= strtol(tmpstr
, NULL
, 0);
2102 arglist
|= CAM_ARG_TARGET
;
2103 tmpstr
= (char *)strtok(NULL
, ":");
2104 if ((tmpstr
!= NULL
) && (*tmpstr
!= '\0')){
2105 mylun
= strtol(tmpstr
, NULL
, 0);
2106 arglist
|= CAM_ARG_LUN
;
2111 warnx("you must specify \"all\", \"off\", or a bus,");
2112 warnx("bus:target, or bus:target:lun to debug");
2118 ccb
.ccb_h
.func_code
= XPT_DEBUG
;
2119 ccb
.ccb_h
.path_id
= mybus
;
2120 ccb
.ccb_h
.target_id
= mytarget
;
2121 ccb
.ccb_h
.target_lun
= mylun
;
2123 if (ioctl(fd
, CAMIOCOMMAND
, &ccb
) == -1) {
2124 warn("CAMIOCOMMAND ioctl failed");
2129 if ((ccb
.ccb_h
.status
& CAM_STATUS_MASK
) ==
2130 CAM_FUNC_NOTAVAIL
) {
2131 warnx("CAM debugging not available");
2132 warnx("you need to put options CAMDEBUG in"
2133 " your kernel config file!");
2135 } else if ((ccb
.ccb_h
.status
& CAM_STATUS_MASK
) !=
2137 warnx("XPT_DEBUG CCB failed with status %#x",
2141 if (ccb
.cdbg
.flags
== CAM_DEBUG_NONE
) {
2143 "Debugging turned off\n");
2146 "Debugging enabled for "
2148 mybus
, mytarget
, mylun
);
2159 tagcontrol(struct cam_device
*device
, int argc
, char **argv
,
2169 ccb
= cam_getccb(device
);
2172 warnx("tagcontrol: error allocating ccb");
2176 while ((c
= getopt(argc
, argv
, combinedopt
)) != -1) {
2179 numtags
= strtol(optarg
, NULL
, 0);
2181 warnx("tag count %d is < 0", numtags
);
2183 goto tagcontrol_bailout
;
2194 cam_path_string(device
, pathstr
, sizeof(pathstr
));
2197 bzero(&(&ccb
->ccb_h
)[1],
2198 sizeof(struct ccb_relsim
) - sizeof(struct ccb_hdr
));
2199 ccb
->ccb_h
.func_code
= XPT_REL_SIMQ
;
2200 ccb
->crs
.release_flags
= RELSIM_ADJUST_OPENINGS
;
2201 ccb
->crs
.openings
= numtags
;
2204 if (cam_send_ccb(device
, ccb
) < 0) {
2205 perror("error sending XPT_REL_SIMQ CCB");
2207 goto tagcontrol_bailout
;
2210 if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
) {
2211 warnx("XPT_REL_SIMQ CCB failed");
2212 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
2213 CAM_EPF_ALL
, stderr
);
2215 goto tagcontrol_bailout
;
2220 fprintf(stdout
, "%stagged openings now %d\n",
2221 pathstr
, ccb
->crs
.openings
);
2224 bzero(&(&ccb
->ccb_h
)[1],
2225 sizeof(struct ccb_getdevstats
) - sizeof(struct ccb_hdr
));
2227 ccb
->ccb_h
.func_code
= XPT_GDEV_STATS
;
2229 if (cam_send_ccb(device
, ccb
) < 0) {
2230 perror("error sending XPT_GDEV_STATS CCB");
2232 goto tagcontrol_bailout
;
2235 if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
) {
2236 warnx("XPT_GDEV_STATS CCB failed");
2237 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
2238 CAM_EPF_ALL
, stderr
);
2240 goto tagcontrol_bailout
;
2243 if (arglist
& CAM_ARG_VERBOSE
) {
2244 fprintf(stdout
, "%s", pathstr
);
2245 fprintf(stdout
, "dev_openings %d\n", ccb
->cgds
.dev_openings
);
2246 fprintf(stdout
, "%s", pathstr
);
2247 fprintf(stdout
, "dev_active %d\n", ccb
->cgds
.dev_active
);
2248 fprintf(stdout
, "%s", pathstr
);
2249 fprintf(stdout
, "devq_openings %d\n", ccb
->cgds
.devq_openings
);
2250 fprintf(stdout
, "%s", pathstr
);
2251 fprintf(stdout
, "devq_queued %d\n", ccb
->cgds
.devq_queued
);
2252 fprintf(stdout
, "%s", pathstr
);
2253 fprintf(stdout
, "held %d\n", ccb
->cgds
.held
);
2254 fprintf(stdout
, "%s", pathstr
);
2255 fprintf(stdout
, "mintags %d\n", ccb
->cgds
.mintags
);
2256 fprintf(stdout
, "%s", pathstr
);
2257 fprintf(stdout
, "maxtags %d\n", ccb
->cgds
.maxtags
);
2260 fprintf(stdout
, "%s", pathstr
);
2261 fprintf(stdout
, "device openings: ");
2263 fprintf(stdout
, "%d\n", ccb
->cgds
.dev_openings
+
2264 ccb
->cgds
.dev_active
);
2274 cts_print(struct cam_device
*device
, struct ccb_trans_settings
*cts
)
2278 cam_path_string(device
, pathstr
, sizeof(pathstr
));
2280 if (cts
->transport
== XPORT_SPI
) {
2281 struct ccb_trans_settings_spi
*spi
=
2282 &cts
->xport_specific
.spi
;
2284 if ((spi
->valid
& CTS_SPI_VALID_SYNC_RATE
) != 0) {
2286 fprintf(stdout
, "%ssync parameter: %d\n", pathstr
,
2289 if (spi
->sync_offset
!= 0) {
2292 freq
= scsi_calc_syncsrate(spi
->sync_period
);
2293 fprintf(stdout
, "%sfrequency: %d.%03dMHz\n",
2294 pathstr
, freq
/ 1000, freq
% 1000);
2298 if (spi
->valid
& CTS_SPI_VALID_SYNC_OFFSET
) {
2299 fprintf(stdout
, "%soffset: %d\n", pathstr
,
2303 if (spi
->valid
& CTS_SPI_VALID_BUS_WIDTH
) {
2304 fprintf(stdout
, "%sbus width: %d bits\n", pathstr
,
2305 (0x01 << spi
->bus_width
) * 8);
2308 if (spi
->valid
& CTS_SPI_VALID_DISC
) {
2309 fprintf(stdout
, "%sdisconnection is %s\n", pathstr
,
2310 (spi
->flags
& CTS_SPI_FLAGS_DISC_ENB
) ?
2311 "enabled" : "disabled");
2315 if (cts
->protocol
== PROTO_SCSI
) {
2316 struct ccb_trans_settings_scsi
*scsi
=
2317 &cts
->proto_specific
.scsi
;
2319 if (scsi
->valid
& CTS_SCSI_VALID_TQ
) {
2320 fprintf(stdout
, "%stagged queueing is %s\n", pathstr
,
2321 (scsi
->flags
& CTS_SCSI_FLAGS_TAG_ENB
) ?
2322 "enabled" : "disabled");
2329 * Get a path inquiry CCB for the specified device.
2332 get_cpi(struct cam_device
*device
, struct ccb_pathinq
*cpi
)
2337 ccb
= cam_getccb(device
);
2340 warnx("get_cpi: couldn't allocate CCB");
2344 bzero(&(&ccb
->ccb_h
)[1],
2345 sizeof(struct ccb_pathinq
) - sizeof(struct ccb_hdr
));
2347 ccb
->ccb_h
.func_code
= XPT_PATH_INQ
;
2349 if (cam_send_ccb(device
, ccb
) < 0) {
2350 warn("get_cpi: error sending Path Inquiry CCB");
2352 if (arglist
& CAM_ARG_VERBOSE
)
2353 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
2354 CAM_EPF_ALL
, stderr
);
2358 goto get_cpi_bailout
;
2361 if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
) {
2363 if (arglist
& CAM_ARG_VERBOSE
)
2364 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
2365 CAM_EPF_ALL
, stderr
);
2369 goto get_cpi_bailout
;
2372 bcopy(&ccb
->cpi
, cpi
, sizeof(struct ccb_pathinq
));
2382 cpi_print(struct ccb_pathinq
*cpi
)
2384 char adapter_str
[1024];
2387 snprintf(adapter_str
, sizeof(adapter_str
),
2388 "%s%d:", cpi
->dev_name
, cpi
->unit_number
);
2390 fprintf(stdout
, "%s SIM/HBA version: %d\n", adapter_str
,
2393 for (i
= 1; i
< 0xff; i
= i
<< 1) {
2396 if ((i
& cpi
->hba_inquiry
) == 0)
2399 fprintf(stdout
, "%s supports ", adapter_str
);
2403 str
= "MDP message";
2406 str
= "32 bit wide SCSI";
2409 str
= "16 bit wide SCSI";
2412 str
= "SDTR message";
2415 str
= "linked CDBs";
2418 str
= "tag queue messages";
2421 str
= "soft reset alternative";
2424 str
= "unknown PI bit set";
2427 fprintf(stdout
, "%s\n", str
);
2430 for (i
= 1; i
< 0xff; i
= i
<< 1) {
2433 if ((i
& cpi
->hba_misc
) == 0)
2436 fprintf(stdout
, "%s ", adapter_str
);
2440 str
= "bus scans from high ID to low ID";
2443 str
= "removable devices not included in scan";
2445 case PIM_NOINITIATOR
:
2446 str
= "initiator role not supported";
2448 case PIM_NOBUSRESET
:
2449 str
= "user has disabled initial BUS RESET or"
2450 " controller is in target/mixed mode";
2453 str
= "unknown PIM bit set";
2456 fprintf(stdout
, "%s\n", str
);
2459 for (i
= 1; i
< 0xff; i
= i
<< 1) {
2462 if ((i
& cpi
->target_sprt
) == 0)
2465 fprintf(stdout
, "%s supports ", adapter_str
);
2468 str
= "target mode processor mode";
2471 str
= "target mode phase cog. mode";
2473 case PIT_DISCONNECT
:
2474 str
= "disconnects in target mode";
2477 str
= "terminate I/O message in target mode";
2480 str
= "group 6 commands in target mode";
2483 str
= "group 7 commands in target mode";
2486 str
= "unknown PIT bit set";
2490 fprintf(stdout
, "%s\n", str
);
2492 fprintf(stdout
, "%s HBA engine count: %d\n", adapter_str
,
2494 fprintf(stdout
, "%s maximum target: %d\n", adapter_str
,
2496 fprintf(stdout
, "%s maximum LUN: %d\n", adapter_str
,
2498 fprintf(stdout
, "%s highest path ID in subsystem: %d\n",
2499 adapter_str
, cpi
->hpath_id
);
2500 fprintf(stdout
, "%s initiator ID: %d\n", adapter_str
,
2502 fprintf(stdout
, "%s SIM vendor: %s\n", adapter_str
, cpi
->sim_vid
);
2503 fprintf(stdout
, "%s HBA vendor: %s\n", adapter_str
, cpi
->hba_vid
);
2504 fprintf(stdout
, "%s bus ID: %d\n", adapter_str
, cpi
->bus_id
);
2505 fprintf(stdout
, "%s base transfer speed: ", adapter_str
);
2506 if (cpi
->base_transfer_speed
> 1000)
2507 fprintf(stdout
, "%d.%03dMB/sec\n",
2508 cpi
->base_transfer_speed
/ 1000,
2509 cpi
->base_transfer_speed
% 1000);
2511 fprintf(stdout
, "%dKB/sec\n",
2512 (cpi
->base_transfer_speed
% 1000) * 1000);
2516 get_print_cts(struct cam_device
*device
, int user_settings
, int quiet
,
2517 struct ccb_trans_settings
*cts
)
2523 ccb
= cam_getccb(device
);
2526 warnx("get_print_cts: error allocating ccb");
2530 bzero(&(&ccb
->ccb_h
)[1],
2531 sizeof(struct ccb_trans_settings
) - sizeof(struct ccb_hdr
));
2533 ccb
->ccb_h
.func_code
= XPT_GET_TRAN_SETTINGS
;
2535 if (user_settings
== 0)
2536 ccb
->cts
.type
= CTS_TYPE_CURRENT_SETTINGS
;
2538 ccb
->cts
.type
= CTS_TYPE_USER_SETTINGS
;
2540 if (cam_send_ccb(device
, ccb
) < 0) {
2541 perror("error sending XPT_GET_TRAN_SETTINGS CCB");
2542 if (arglist
& CAM_ARG_VERBOSE
)
2543 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
2544 CAM_EPF_ALL
, stderr
);
2546 goto get_print_cts_bailout
;
2549 if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
) {
2550 warnx("XPT_GET_TRANS_SETTINGS CCB failed");
2551 if (arglist
& CAM_ARG_VERBOSE
)
2552 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
2553 CAM_EPF_ALL
, stderr
);
2555 goto get_print_cts_bailout
;
2559 cts_print(device
, &ccb
->cts
);
2562 bcopy(&ccb
->cts
, cts
, sizeof(struct ccb_trans_settings
));
2564 get_print_cts_bailout
:
2572 ratecontrol(struct cam_device
*device
, int retry_count
, int timeout
,
2573 int argc
, char **argv
, char *combinedopt
)
2577 int user_settings
= 0;
2579 int disc_enable
= -1, tag_enable
= -1;
2581 double syncrate
= -1;
2584 int change_settings
= 0, send_tur
= 0;
2585 struct ccb_pathinq cpi
;
2587 ccb
= cam_getccb(device
);
2590 warnx("ratecontrol: error allocating ccb");
2594 while ((c
= getopt(argc
, argv
, combinedopt
)) != -1) {
2603 if (strncasecmp(optarg
, "enable", 6) == 0)
2605 else if (strncasecmp(optarg
, "disable", 7) == 0)
2608 warnx("-D argument \"%s\" is unknown", optarg
);
2610 goto ratecontrol_bailout
;
2612 change_settings
= 1;
2615 offset
= strtol(optarg
, NULL
, 0);
2617 warnx("offset value %d is < 0", offset
);
2619 goto ratecontrol_bailout
;
2621 change_settings
= 1;
2627 syncrate
= atof(optarg
);
2630 warnx("sync rate %f is < 0", syncrate
);
2632 goto ratecontrol_bailout
;
2634 change_settings
= 1;
2637 if (strncasecmp(optarg
, "enable", 6) == 0)
2639 else if (strncasecmp(optarg
, "disable", 7) == 0)
2642 warnx("-T argument \"%s\" is unknown", optarg
);
2644 goto ratecontrol_bailout
;
2646 change_settings
= 1;
2652 bus_width
= strtol(optarg
, NULL
, 0);
2653 if (bus_width
< 0) {
2654 warnx("bus width %d is < 0", bus_width
);
2656 goto ratecontrol_bailout
;
2658 change_settings
= 1;
2665 bzero(&(&ccb
->ccb_h
)[1],
2666 sizeof(struct ccb_pathinq
) - sizeof(struct ccb_hdr
));
2669 * Grab path inquiry information, so we can determine whether
2670 * or not the initiator is capable of the things that the user
2673 ccb
->ccb_h
.func_code
= XPT_PATH_INQ
;
2675 if (cam_send_ccb(device
, ccb
) < 0) {
2676 perror("error sending XPT_PATH_INQ CCB");
2677 if (arglist
& CAM_ARG_VERBOSE
) {
2678 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
2679 CAM_EPF_ALL
, stderr
);
2682 goto ratecontrol_bailout
;
2685 if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
) {
2686 warnx("XPT_PATH_INQ CCB failed");
2687 if (arglist
& CAM_ARG_VERBOSE
) {
2688 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
2689 CAM_EPF_ALL
, stderr
);
2692 goto ratecontrol_bailout
;
2695 bcopy(&ccb
->cpi
, &cpi
, sizeof(struct ccb_pathinq
));
2697 bzero(&(&ccb
->ccb_h
)[1],
2698 sizeof(struct ccb_trans_settings
) - sizeof(struct ccb_hdr
));
2701 fprintf(stdout
, "Current Parameters:\n");
2703 retval
= get_print_cts(device
, user_settings
, quiet
, &ccb
->cts
);
2706 goto ratecontrol_bailout
;
2708 if (arglist
& CAM_ARG_VERBOSE
)
2711 if (change_settings
) {
2712 int didsettings
= 0;
2713 struct ccb_trans_settings_spi
*spi
= NULL
;
2714 struct ccb_trans_settings_scsi
*scsi
= NULL
;
2716 if (ccb
->cts
.transport
== XPORT_SPI
) {
2717 spi
= &ccb
->cts
.xport_specific
.spi
;
2720 if (ccb
->cts
.protocol
== PROTO_SCSI
) {
2721 scsi
= &ccb
->cts
.proto_specific
.scsi
;
2724 if (spi
&& disc_enable
!= -1) {
2725 spi
->valid
|= CTS_SPI_VALID_DISC
;
2726 if (disc_enable
== 0)
2727 spi
->flags
&= ~CTS_SPI_FLAGS_DISC_ENB
;
2729 spi
->flags
|= CTS_SPI_FLAGS_DISC_ENB
;
2732 if (scsi
&& tag_enable
!= -1) {
2733 if ((cpi
.hba_inquiry
& PI_TAG_ABLE
) == 0) {
2734 warnx("HBA does not support tagged queueing, "
2735 "so you cannot modify tag settings");
2737 goto ratecontrol_bailout
;
2740 scsi
->valid
|= CTS_SCSI_VALID_TQ
;
2742 if (tag_enable
== 0)
2743 scsi
->flags
&= ~CTS_SCSI_FLAGS_TAG_ENB
;
2745 scsi
->flags
|= CTS_SCSI_FLAGS_TAG_ENB
;
2749 if (spi
&& offset
!= -1) {
2750 if ((cpi
.hba_inquiry
& PI_SDTR_ABLE
) == 0) {
2751 warnx("HBA at %s%d is not cable of changing "
2752 "offset", cpi
.dev_name
,
2755 goto ratecontrol_bailout
;
2757 spi
->valid
|= CTS_SPI_VALID_SYNC_OFFSET
;
2758 spi
->sync_offset
= offset
;
2762 if (spi
&& syncrate
!= -1) {
2763 int prelim_sync_period
;
2765 if ((cpi
.hba_inquiry
& PI_SDTR_ABLE
) == 0) {
2766 warnx("HBA at %s%d is not cable of changing "
2767 "transfer rates", cpi
.dev_name
,
2770 goto ratecontrol_bailout
;
2773 spi
->valid
|= CTS_SPI_VALID_SYNC_RATE
;
2776 * The sync rate the user gives us is in MHz.
2777 * We need to translate it into KHz for this
2783 * Next, we calculate a "preliminary" sync period
2784 * in tenths of a nanosecond.
2787 prelim_sync_period
= 0;
2789 prelim_sync_period
= 10000000 / syncrate
;
2792 scsi_calc_syncparam(prelim_sync_period
);
2798 * The bus_width argument goes like this:
2802 * Therefore, if you shift the number of bits given on the
2803 * command line right by 4, you should get the correct
2806 if (spi
&& bus_width
!= -1) {
2809 * We might as well validate things here with a
2810 * decipherable error message, rather than what
2811 * will probably be an indecipherable error message
2812 * by the time it gets back to us.
2814 if ((bus_width
== 16)
2815 && ((cpi
.hba_inquiry
& PI_WIDE_16
) == 0)) {
2816 warnx("HBA does not support 16 bit bus width");
2818 goto ratecontrol_bailout
;
2819 } else if ((bus_width
== 32)
2820 && ((cpi
.hba_inquiry
& PI_WIDE_32
) == 0)) {
2821 warnx("HBA does not support 32 bit bus width");
2823 goto ratecontrol_bailout
;
2824 } else if ((bus_width
!= 8)
2825 && (bus_width
!= 16)
2826 && (bus_width
!= 32)) {
2827 warnx("Invalid bus width %d", bus_width
);
2829 goto ratecontrol_bailout
;
2832 spi
->valid
|= CTS_SPI_VALID_BUS_WIDTH
;
2833 spi
->bus_width
= bus_width
>> 4;
2837 if (didsettings
== 0) {
2838 goto ratecontrol_bailout
;
2840 ccb
->ccb_h
.func_code
= XPT_SET_TRAN_SETTINGS
;
2842 if (cam_send_ccb(device
, ccb
) < 0) {
2843 perror("error sending XPT_SET_TRAN_SETTINGS CCB");
2844 if (arglist
& CAM_ARG_VERBOSE
) {
2845 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
2846 CAM_EPF_ALL
, stderr
);
2849 goto ratecontrol_bailout
;
2852 if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
) {
2853 warnx("XPT_SET_TRANS_SETTINGS CCB failed");
2854 if (arglist
& CAM_ARG_VERBOSE
) {
2855 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
2856 CAM_EPF_ALL
, stderr
);
2859 goto ratecontrol_bailout
;
2864 retval
= testunitready(device
, retry_count
, timeout
,
2865 (arglist
& CAM_ARG_VERBOSE
) ? 0 : 1);
2868 * If the TUR didn't succeed, just bail.
2872 fprintf(stderr
, "Test Unit Ready failed\n");
2873 goto ratecontrol_bailout
;
2877 * If the user wants things quiet, there's no sense in
2878 * getting the transfer settings, if we're not going
2882 goto ratecontrol_bailout
;
2884 fprintf(stdout
, "New Parameters:\n");
2885 retval
= get_print_cts(device
, user_settings
, 0, NULL
);
2888 ratecontrol_bailout
:
2895 scsiformat(struct cam_device
*device
, int argc
, char **argv
,
2896 char *combinedopt
, int retry_count
, int timeout
)
2900 int ycount
= 0, quiet
= 0;
2901 int error
= 0, response
= 0, retval
= 0;
2902 int use_timeout
= 10800 * 1000;
2904 struct format_defect_list_header fh
;
2905 u_int8_t
*data_ptr
= NULL
;
2906 u_int32_t dxfer_len
= 0;
2908 int num_warnings
= 0;
2911 ccb
= cam_getccb(device
);
2914 warnx("scsiformat: error allocating ccb");
2918 bzero(&(&ccb
->ccb_h
)[1],
2919 sizeof(struct ccb_scsiio
) - sizeof(struct ccb_hdr
));
2921 while ((c
= getopt(argc
, argv
, combinedopt
)) != -1) {
2942 fprintf(stdout
, "You are about to REMOVE ALL DATA from the "
2943 "following device:\n");
2945 error
= scsidoinquiry(device
, argc
, argv
, combinedopt
,
2946 retry_count
, timeout
);
2949 warnx("scsiformat: error sending inquiry");
2950 goto scsiformat_bailout
;
2959 fprintf(stdout
, "Are you SURE you want to do "
2962 if (fgets(str
, sizeof(str
), stdin
) != NULL
) {
2964 if (strncasecmp(str
, "yes", 3) == 0)
2966 else if (strncasecmp(str
, "no", 2) == 0)
2969 fprintf(stdout
, "Please answer"
2970 " \"yes\" or \"no\"\n");
2973 } while (response
== 0);
2975 if (response
== -1) {
2977 goto scsiformat_bailout
;
2982 use_timeout
= timeout
;
2985 fprintf(stdout
, "Current format timeout is %d seconds\n",
2986 use_timeout
/ 1000);
2990 * If the user hasn't disabled questions and didn't specify a
2991 * timeout on the command line, ask them if they want the current
2995 && (timeout
== 0)) {
2997 int new_timeout
= 0;
2999 fprintf(stdout
, "Enter new timeout in seconds or press\n"
3000 "return to keep the current timeout [%d] ",
3001 use_timeout
/ 1000);
3003 if (fgets(str
, sizeof(str
), stdin
) != NULL
) {
3005 new_timeout
= atoi(str
);
3008 if (new_timeout
!= 0) {
3009 use_timeout
= new_timeout
* 1000;
3010 fprintf(stdout
, "Using new timeout value %d\n",
3011 use_timeout
/ 1000);
3016 * Keep this outside the if block below to silence any unused
3017 * variable warnings.
3019 bzero(&fh
, sizeof(fh
));
3022 * If we're in immediate mode, we've got to include the format
3025 if (immediate
!= 0) {
3026 fh
.byte2
= FU_DLH_IMMED
;
3027 data_ptr
= (u_int8_t
*)&fh
;
3028 dxfer_len
= sizeof(fh
);
3029 byte2
= FU_FMT_DATA
;
3030 } else if (quiet
== 0) {
3031 fprintf(stdout
, "Formatting...");
3035 scsi_format_unit(&ccb
->csio
,
3036 /* retries */ retry_count
,
3038 /* tag_action */ MSG_SIMPLE_Q_TAG
,
3041 /* data_ptr */ data_ptr
,
3042 /* dxfer_len */ dxfer_len
,
3043 /* sense_len */ SSD_FULL_SIZE
,
3044 /* timeout */ use_timeout
);
3046 /* Disable freezing the device queue */
3047 ccb
->ccb_h
.flags
|= CAM_DEV_QFRZDIS
;
3049 if (arglist
& CAM_ARG_ERR_RECOVER
)
3050 ccb
->ccb_h
.flags
|= CAM_PASS_ERR_RECOVER
;
3052 if (((retval
= cam_send_ccb(device
, ccb
)) < 0)
3053 || ((immediate
== 0)
3054 && ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
))) {
3055 const char errstr
[] = "error sending format command";
3062 if (arglist
& CAM_ARG_VERBOSE
) {
3063 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
3064 CAM_EPF_ALL
, stderr
);
3067 goto scsiformat_bailout
;
3071 * If we ran in non-immediate mode, we already checked for errors
3072 * above and printed out any necessary information. If we're in
3073 * immediate mode, we need to loop through and get status
3074 * information periodically.
3076 if (immediate
== 0) {
3078 fprintf(stdout
, "Format Complete\n");
3080 goto scsiformat_bailout
;
3087 bzero(&(&ccb
->ccb_h
)[1],
3088 sizeof(struct ccb_scsiio
) - sizeof(struct ccb_hdr
));
3091 * There's really no need to do error recovery or
3092 * retries here, since we're just going to sit in a
3093 * loop and wait for the device to finish formatting.
3095 scsi_test_unit_ready(&ccb
->csio
,
3098 /* tag_action */ MSG_SIMPLE_Q_TAG
,
3099 /* sense_len */ SSD_FULL_SIZE
,
3100 /* timeout */ 5000);
3102 /* Disable freezing the device queue */
3103 ccb
->ccb_h
.flags
|= CAM_DEV_QFRZDIS
;
3105 retval
= cam_send_ccb(device
, ccb
);
3108 * If we get an error from the ioctl, bail out. SCSI
3109 * errors are expected.
3112 warn("error sending CAMIOCOMMAND ioctl");
3113 if (arglist
& CAM_ARG_VERBOSE
) {
3114 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
3115 CAM_EPF_ALL
, stderr
);
3118 goto scsiformat_bailout
;
3121 status
= ccb
->ccb_h
.status
& CAM_STATUS_MASK
;
3123 if ((status
!= CAM_REQ_CMP
)
3124 && (status
== CAM_SCSI_STATUS_ERROR
)
3125 && ((ccb
->ccb_h
.status
& CAM_AUTOSNS_VALID
) != 0)) {
3126 struct scsi_sense_data
*sense
;
3127 int error_code
, sense_key
, asc
, ascq
;
3129 sense
= &ccb
->csio
.sense_data
;
3130 scsi_extract_sense(sense
, &error_code
, &sense_key
,
3134 * According to the SCSI-2 and SCSI-3 specs, a
3135 * drive that is in the middle of a format should
3136 * return NOT READY with an ASC of "logical unit
3137 * not ready, format in progress". The sense key
3138 * specific bytes will then be a progress indicator.
3140 if ((sense_key
== SSD_KEY_NOT_READY
)
3141 && (asc
== 0x04) && (ascq
== 0x04)) {
3142 if ((sense
->extra_len
>= 10)
3143 && ((sense
->sense_key_spec
[0] &
3144 SSD_SCS_VALID
) != 0)
3147 u_int64_t percentage
;
3150 &sense
->sense_key_spec
[1]);
3151 percentage
= 10000 * val
;
3154 "\rFormatting: %jd.%02jd %% "
3156 (intmax_t)percentage
/ (0x10000 * 100),
3157 (intmax_t)(percentage
/ 0x10000) % 100,
3160 } else if ((quiet
== 0)
3161 && (++num_warnings
<= 1)) {
3162 warnx("Unexpected SCSI Sense Key "
3163 "Specific value returned "
3165 scsi_sense_print(device
, &ccb
->csio
,
3167 warnx("Unable to print status "
3168 "information, but format will "
3170 warnx("will exit when format is "
3175 warnx("Unexpected SCSI error during format");
3176 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
3177 CAM_EPF_ALL
, stderr
);
3179 goto scsiformat_bailout
;
3182 } else if (status
!= CAM_REQ_CMP
) {
3183 warnx("Unexpected CAM status %#x", status
);
3184 if (arglist
& CAM_ARG_VERBOSE
)
3185 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
3186 CAM_EPF_ALL
, stderr
);
3188 goto scsiformat_bailout
;
3191 } while((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
);
3194 fprintf(stdout
, "\nFormat Complete\n");
3204 scsireportluns(struct cam_device
*device
, int argc
, char **argv
,
3205 char *combinedopt
, int retry_count
, int timeout
)
3208 int c
, countonly
, lunsonly
;
3209 struct scsi_report_luns_data
*lundata
;
3211 uint8_t report_type
;
3212 uint32_t list_len
, i
, j
;
3217 report_type
= RPL_REPORT_DEFAULT
;
3218 ccb
= cam_getccb(device
);
3221 warnx("%s: error allocating ccb", __func__
);
3225 bzero(&(&ccb
->ccb_h
)[1],
3226 sizeof(struct ccb_scsiio
) - sizeof(struct ccb_hdr
));
3231 while ((c
= getopt(argc
, argv
, combinedopt
)) != -1) {
3240 if (strcasecmp(optarg
, "default") == 0)
3241 report_type
= RPL_REPORT_DEFAULT
;
3242 else if (strcasecmp(optarg
, "wellknown") == 0)
3243 report_type
= RPL_REPORT_WELLKNOWN
;
3244 else if (strcasecmp(optarg
, "all") == 0)
3245 report_type
= RPL_REPORT_ALL
;
3247 warnx("%s: invalid report type \"%s\"",
3258 if ((countonly
!= 0)
3259 && (lunsonly
!= 0)) {
3260 warnx("%s: you can only specify one of -c or -l", __func__
);
3265 * According to SPC-4, the allocation length must be at least 16
3266 * bytes -- enough for the header and one LUN.
3268 alloc_len
= sizeof(*lundata
) + 8;
3272 lundata
= malloc(alloc_len
);
3274 if (lundata
== NULL
) {
3275 warn("%s: error mallocing %d bytes", __func__
, alloc_len
);
3280 scsi_report_luns(&ccb
->csio
,
3281 /*retries*/ retry_count
,
3283 /*tag_action*/ MSG_SIMPLE_Q_TAG
,
3284 /*select_report*/ report_type
,
3285 /*rpl_buf*/ lundata
,
3286 /*alloc_len*/ alloc_len
,
3287 /*sense_len*/ SSD_FULL_SIZE
,
3288 /*timeout*/ timeout
? timeout
: 5000);
3290 /* Disable freezing the device queue */
3291 ccb
->ccb_h
.flags
|= CAM_DEV_QFRZDIS
;
3293 if (arglist
& CAM_ARG_ERR_RECOVER
)
3294 ccb
->ccb_h
.flags
|= CAM_PASS_ERR_RECOVER
;
3296 if (cam_send_ccb(device
, ccb
) < 0) {
3297 warn("error sending REPORT LUNS command");
3299 if (arglist
& CAM_ARG_VERBOSE
)
3300 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
3301 CAM_EPF_ALL
, stderr
);
3307 if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
) {
3308 cam_error_print(device
, ccb
, CAM_ESF_ALL
, CAM_EPF_ALL
, stderr
);
3314 list_len
= scsi_4btoul(lundata
->length
);
3317 * If we need to list the LUNs, and our allocation
3318 * length was too short, reallocate and retry.
3320 if ((countonly
== 0)
3321 && (list_len
> (alloc_len
- sizeof(*lundata
)))) {
3322 alloc_len
= list_len
+ sizeof(*lundata
);
3328 fprintf(stdout
, "%u LUN%s found\n", list_len
/ 8,
3329 ((list_len
/ 8) > 1) ? "s" : "");
3334 for (i
= 0; i
< (list_len
/ 8); i
++) {
3338 for (j
= 0; j
< sizeof(lundata
->luns
[i
].lundata
); j
+= 2) {
3340 fprintf(stdout
, ",");
3341 switch (lundata
->luns
[i
].lundata
[j
] &
3342 RPL_LUNDATA_ATYP_MASK
) {
3343 case RPL_LUNDATA_ATYP_PERIPH
:
3344 if ((lundata
->luns
[i
].lundata
[j
] &
3345 RPL_LUNDATA_PERIPH_BUS_MASK
) != 0)
3346 fprintf(stdout
, "%d:",
3347 lundata
->luns
[i
].lundata
[j
] &
3348 RPL_LUNDATA_PERIPH_BUS_MASK
);
3350 && ((lundata
->luns
[i
].lundata
[j
+2] &
3351 RPL_LUNDATA_PERIPH_BUS_MASK
) == 0))
3354 fprintf(stdout
, "%d",
3355 lundata
->luns
[i
].lundata
[j
+1]);
3357 case RPL_LUNDATA_ATYP_FLAT
: {
3359 tmplun
[0] = lundata
->luns
[i
].lundata
[j
] &
3360 RPL_LUNDATA_FLAT_LUN_MASK
;
3361 tmplun
[1] = lundata
->luns
[i
].lundata
[j
+1];
3363 fprintf(stdout
, "%d", scsi_2btoul(tmplun
));
3367 case RPL_LUNDATA_ATYP_LUN
:
3368 fprintf(stdout
, "%d:%d:%d",
3369 (lundata
->luns
[i
].lundata
[j
+1] &
3370 RPL_LUNDATA_LUN_BUS_MASK
) >> 5,
3371 lundata
->luns
[i
].lundata
[j
] &
3372 RPL_LUNDATA_LUN_TARG_MASK
,
3373 lundata
->luns
[i
].lundata
[j
+1] &
3374 RPL_LUNDATA_LUN_LUN_MASK
);
3376 case RPL_LUNDATA_ATYP_EXTLUN
: {
3377 int field_len_code
, eam_code
;
3379 eam_code
= lundata
->luns
[i
].lundata
[j
] &
3380 RPL_LUNDATA_EXT_EAM_MASK
;
3381 field_len_code
= (lundata
->luns
[i
].lundata
[j
] &
3382 RPL_LUNDATA_EXT_LEN_MASK
) >> 4;
3384 if ((eam_code
== RPL_LUNDATA_EXT_EAM_WK
)
3385 && (field_len_code
== 0x00)) {
3386 fprintf(stdout
, "%d",
3387 lundata
->luns
[i
].lundata
[j
+1]);
3388 } else if ((eam_code
==
3389 RPL_LUNDATA_EXT_EAM_NOT_SPEC
)
3390 && (field_len_code
== 0x03)) {
3394 * This format takes up all 8 bytes.
3395 * If we aren't starting at offset 0,
3399 fprintf(stdout
, "Invalid "
3402 "specified format", j
);
3406 bzero(tmp_lun
, sizeof(tmp_lun
));
3407 bcopy(&lundata
->luns
[i
].lundata
[j
+1],
3408 &tmp_lun
[1], sizeof(tmp_lun
) - 1);
3409 fprintf(stdout
, "%#jx",
3410 (intmax_t)scsi_8btou64(tmp_lun
));
3413 fprintf(stderr
, "Unknown Extended LUN"
3414 "Address method %#x, length "
3415 "code %#x", eam_code
,
3422 fprintf(stderr
, "Unknown LUN address method "
3423 "%#x\n", lundata
->luns
[i
].lundata
[0] &
3424 RPL_LUNDATA_ATYP_MASK
);
3428 * For the flat addressing method, there are no
3429 * other levels after it.
3434 fprintf(stdout
, "\n");
3447 scsireadcapacity(struct cam_device
*device
, int argc
, char **argv
,
3448 char *combinedopt
, int retry_count
, int timeout
)
3451 int blocksizeonly
, humanize
, numblocks
, quiet
, sizeonly
, baseten
;
3452 struct scsi_read_capacity_data rcap
;
3453 struct scsi_read_capacity_data_16 rcaplong
;
3467 ccb
= cam_getccb(device
);
3470 warnx("%s: error allocating ccb", __func__
);
3474 bzero(&(&ccb
->ccb_h
)[1],
3475 sizeof(struct ccb_scsiio
) - sizeof(struct ccb_hdr
));
3477 while ((c
= getopt(argc
, argv
, combinedopt
)) != -1) {
3504 if ((blocksizeonly
!= 0)
3505 && (numblocks
!= 0)) {
3506 warnx("%s: you can only specify one of -b or -N", __func__
);
3511 if ((blocksizeonly
!= 0)
3512 && (sizeonly
!= 0)) {
3513 warnx("%s: you can only specify one of -b or -s", __func__
);
3520 warnx("%s: you can only specify one of -h/-H or -q", __func__
);
3526 && (blocksizeonly
!= 0)) {
3527 warnx("%s: you can only specify one of -h/-H or -b", __func__
);
3532 scsi_read_capacity(&ccb
->csio
,
3533 /*retries*/ retry_count
,
3535 /*tag_action*/ MSG_SIMPLE_Q_TAG
,
3538 /*timeout*/ timeout
? timeout
: 5000);
3540 /* Disable freezing the device queue */
3541 ccb
->ccb_h
.flags
|= CAM_DEV_QFRZDIS
;
3543 if (arglist
& CAM_ARG_ERR_RECOVER
)
3544 ccb
->ccb_h
.flags
|= CAM_PASS_ERR_RECOVER
;
3546 if (cam_send_ccb(device
, ccb
) < 0) {
3547 warn("error sending READ CAPACITY command");
3549 if (arglist
& CAM_ARG_VERBOSE
)
3550 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
3551 CAM_EPF_ALL
, stderr
);
3557 if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
) {
3558 cam_error_print(device
, ccb
, CAM_ESF_ALL
, CAM_EPF_ALL
, stderr
);
3563 maxsector
= scsi_4btoul(rcap
.addr
);
3564 block_len
= scsi_4btoul(rcap
.length
);
3567 * A last block of 2^32-1 means that the true capacity is over 2TB,
3568 * and we need to issue the long READ CAPACITY to get the real
3569 * capacity. Otherwise, we're all set.
3571 if (maxsector
!= 0xffffffff)
3574 scsi_read_capacity_16(&ccb
->csio
,
3575 /*retries*/ retry_count
,
3577 /*tag_action*/ MSG_SIMPLE_Q_TAG
,
3582 /*sense_len*/ SSD_FULL_SIZE
,
3583 /*timeout*/ timeout
? timeout
: 5000);
3585 /* Disable freezing the device queue */
3586 ccb
->ccb_h
.flags
|= CAM_DEV_QFRZDIS
;
3588 if (arglist
& CAM_ARG_ERR_RECOVER
)
3589 ccb
->ccb_h
.flags
|= CAM_PASS_ERR_RECOVER
;
3591 if (cam_send_ccb(device
, ccb
) < 0) {
3592 warn("error sending READ CAPACITY (16) command");
3594 if (arglist
& CAM_ARG_VERBOSE
)
3595 cam_error_print(device
, ccb
, CAM_ESF_ALL
,
3596 CAM_EPF_ALL
, stderr
);
3602 if ((ccb
->ccb_h
.status
& CAM_STATUS_MASK
) != CAM_REQ_CMP
) {
3603 cam_error_print(device
, ccb
, CAM_ESF_ALL
, CAM_EPF_ALL
, stderr
);
3608 maxsector
= scsi_8btou64(rcaplong
.addr
);
3609 block_len
= scsi_4btoul(rcaplong
.length
);
3612 if (blocksizeonly
== 0) {
3614 * Humanize implies !quiet, and also implies numblocks.
3616 if (humanize
!= 0) {
3621 tmpbytes
= (maxsector
+ 1) * block_len
;
3622 ret
= humanize_number(tmpstr
, sizeof(tmpstr
),
3623 tmpbytes
, "", HN_AUTOSCALE
,
3626 HN_DIVISOR_1000
: 0));
3628 warnx("%s: humanize_number failed!", __func__
);
3632 fprintf(stdout
, "Device Size: %s%s", tmpstr
,
3633 (sizeonly
== 0) ? ", " : "\n");
3634 } else if (numblocks
!= 0) {
3635 fprintf(stdout
, "%s%ju%s", (quiet
== 0) ?
3636 "Blocks: " : "", (uintmax_t)maxsector
+ 1,
3637 (sizeonly
== 0) ? ", " : "\n");
3639 fprintf(stdout
, "%s%ju%s", (quiet
== 0) ?
3640 "Last Block: " : "", (uintmax_t)maxsector
,
3641 (sizeonly
== 0) ? ", " : "\n");
3645 fprintf(stdout
, "%s%u%s\n", (quiet
== 0) ?
3646 "Block Length: " : "", block_len
, (quiet
== 0) ?
3654 #endif /* MINIMALISTIC */
3659 fprintf(verbose
? stdout
: stderr
,
3660 "usage: camcontrol <command> [device id][generic args][command args]\n"
3661 " camcontrol devlist [-v]\n"
3662 #ifndef MINIMALISTIC
3663 " camcontrol periphlist [dev_id][-n dev_name] [-u unit]\n"
3664 " camcontrol tur [dev_id][generic args]\n"
3665 " camcontrol inquiry [dev_id][generic args] [-D] [-S] [-R]\n"
3666 " camcontrol reportluns [dev_id][generic args] [-c] [-l] [-r report]\n"
3667 " camcontrol readcap [dev_id][generic args] [-b] [-h] [-H] [-N]\n"
3669 " camcontrol start [dev_id][generic args]\n"
3670 " camcontrol stop [dev_id][generic args]\n"
3671 " camcontrol load [dev_id][generic args]\n"
3672 " camcontrol eject [dev_id][generic args]\n"
3673 #endif /* MINIMALISTIC */
3674 " camcontrol rescan <all | bus[:target:lun]>\n"
3675 " camcontrol reset <all | bus[:target:lun]>\n"
3676 #ifndef MINIMALISTIC
3677 " camcontrol defects [dev_id][generic args] <-f format> [-P][-G]\n"
3678 " camcontrol modepage [dev_id][generic args] <-m page | -l>\n"
3679 " [-P pagectl][-e | -b][-d]\n"
3680 " camcontrol cmd [dev_id][generic args] <-c cmd [args]>\n"
3681 " [-i len fmt|-o len fmt [args]]\n"
3682 " camcontrol debug [-I][-P][-T][-S][-X][-c]\n"
3683 " <all|bus[:target[:lun]]|off>\n"
3684 " camcontrol tags [dev_id][generic args] [-N tags] [-q] [-v]\n"
3685 " camcontrol negotiate [dev_id][generic args] [-a][-c]\n"
3686 " [-D <enable|disable>][-O offset][-q]\n"
3687 " [-R syncrate][-v][-T <enable|disable>]\n"
3688 " [-U][-W bus_width]\n"
3689 " camcontrol format [dev_id][generic args][-q][-r][-w][-y]\n"
3690 #endif /* MINIMALISTIC */
3691 " camcontrol help\n");
3694 #ifndef MINIMALISTIC
3696 "Specify one of the following options:\n"
3697 "devlist list all CAM devices\n"
3698 "periphlist list all CAM peripheral drivers attached to a device\n"
3699 "tur send a test unit ready to the named device\n"
3700 "inquiry send a SCSI inquiry command to the named device\n"
3701 "reportluns send a SCSI report luns command to the device\n"
3702 "readcap send a SCSI read capacity command to the device\n"
3703 "start send a Start Unit command to the device\n"
3704 "stop send a Stop Unit command to the device\n"
3705 "load send a Start Unit command to the device with the load bit set\n"
3706 "eject send a Stop Unit command to the device with the eject bit set\n"
3707 "rescan rescan all busses, the given bus, or bus:target:lun\n"
3708 "reset reset all busses, the given bus, or bus:target:lun\n"
3709 "defects read the defect list of the specified device\n"
3710 "modepage display or edit (-e) the given mode page\n"
3711 "cmd send the given scsi command, may need -i or -o as well\n"
3712 "debug turn debugging on/off for a bus, target, or lun, or all devices\n"
3713 "tags report or set the number of transaction slots for a device\n"
3714 "negotiate report or set device negotiation parameters\n"
3715 "format send the SCSI FORMAT UNIT command to the named device\n"
3716 "help this message\n"
3717 "Device Identifiers:\n"
3718 "bus:target specify the bus and target, lun defaults to 0\n"
3719 "bus:target:lun specify the bus, target and lun\n"
3720 "deviceUNIT specify the device name, like \"da4\" or \"cd2\"\n"
3721 "Generic arguments:\n"
3722 "-v be verbose, print out sense information\n"
3723 "-t timeout command timeout in seconds, overrides default timeout\n"
3724 "-n dev_name specify device name, e.g. \"da\", \"cd\"\n"
3725 "-u unit specify unit number, e.g. \"0\", \"5\"\n"
3726 "-E have the kernel attempt to perform SCSI error recovery\n"
3727 "-C count specify the SCSI command retry count (needs -E to work)\n"
3728 "modepage arguments:\n"
3729 "-l list all available mode pages\n"
3730 "-m page specify the mode page to view or edit\n"
3731 "-e edit the specified mode page\n"
3732 "-b force view to binary mode\n"
3733 "-d disable block descriptors for mode sense\n"
3734 "-P pgctl page control field 0-3\n"
3735 "defects arguments:\n"
3736 "-f format specify defect list format (block, bfi or phys)\n"
3737 "-G get the grown defect list\n"
3738 "-P get the permanent defect list\n"
3739 "inquiry arguments:\n"
3740 "-D get the standard inquiry data\n"
3741 "-S get the serial number\n"
3742 "-R get the transfer rate, etc.\n"
3743 "reportluns arguments:\n"
3744 "-c only report a count of available LUNs\n"
3745 "-l only print out luns, and not a count\n"
3746 "-r <reporttype> specify \"default\", \"wellknown\" or \"all\"\n"
3747 "readcap arguments\n"
3748 "-b only report the blocksize\n"
3749 "-h human readable device size, base 2\n"
3750 "-H human readable device size, base 10\n"
3751 "-N print the number of blocks instead of last block\n"
3752 "-q quiet, print numbers only\n"
3753 "-s only report the last block/device size\n"
3755 "-c cdb [args] specify the SCSI CDB\n"
3756 "-i len fmt specify input data and input data format\n"
3757 "-o len fmt [args] specify output data and output data fmt\n"
3758 "debug arguments:\n"
3759 "-I CAM_DEBUG_INFO -- scsi commands, errors, data\n"
3760 "-T CAM_DEBUG_TRACE -- routine flow tracking\n"
3761 "-S CAM_DEBUG_SUBTRACE -- internal routine command flow\n"
3762 "-c CAM_DEBUG_CDB -- print out SCSI CDBs only\n"
3764 "-N tags specify the number of tags to use for this device\n"
3765 "-q be quiet, don't report the number of tags\n"
3766 "-v report a number of tag-related parameters\n"
3767 "negotiate arguments:\n"
3768 "-a send a test unit ready after negotiation\n"
3769 "-c report/set current negotiation settings\n"
3770 "-D <arg> \"enable\" or \"disable\" disconnection\n"
3771 "-O offset set command delay offset\n"
3772 "-q be quiet, don't report anything\n"
3773 "-R syncrate synchronization rate in MHz\n"
3774 "-T <arg> \"enable\" or \"disable\" tagged queueing\n"
3775 "-U report/set user negotiation settings\n"
3776 "-W bus_width set the bus width in bits (8, 16 or 32)\n"
3777 "-v also print a Path Inquiry CCB for the controller\n"
3778 "format arguments:\n"
3779 "-q be quiet, don't print status messages\n"
3780 "-r run in report only mode\n"
3781 "-w don't send immediate format command\n"
3782 "-y don't ask any questions\n");
3783 #endif /* MINIMALISTIC */
3787 main(int argc
, char **argv
)
3790 char *device
= NULL
;
3792 struct cam_device
*cam_dev
= NULL
;
3793 int timeout
= 0, retry_count
= 1;
3794 camcontrol_optret optreturn
;
3796 const char *mainopt
= "C:En:t:u:v";
3797 const char *subopt
= NULL
;
3798 char combinedopt
[256];
3799 int error
= 0, optstart
= 2;
3802 cmdlist
= CAM_CMD_NONE
;
3803 arglist
= CAM_ARG_NONE
;
3811 * Get the base option.
3813 optreturn
= getoption(argv
[1], &cmdlist
, &arglist
, &subopt
);
3815 if (optreturn
== CC_OR_AMBIGUOUS
) {
3816 warnx("ambiguous option %s", argv
[1]);
3819 } else if (optreturn
== CC_OR_NOT_FOUND
) {
3820 warnx("option %s not found", argv
[1]);
3826 * Ahh, getopt(3) is a pain.
3828 * This is a gross hack. There really aren't many other good
3829 * options (excuse the pun) for parsing options in a situation like
3830 * this. getopt is kinda braindead, so you end up having to run
3831 * through the options twice, and give each invocation of getopt
3832 * the option string for the other invocation.
3834 * You would think that you could just have two groups of options.
3835 * The first group would get parsed by the first invocation of
3836 * getopt, and the second group would get parsed by the second
3837 * invocation of getopt. It doesn't quite work out that way. When
3838 * the first invocation of getopt finishes, it leaves optind pointing
3839 * to the argument _after_ the first argument in the second group.
3840 * So when the second invocation of getopt comes around, it doesn't
3841 * recognize the first argument it gets and then bails out.
3843 * A nice alternative would be to have a flag for getopt that says
3844 * "just keep parsing arguments even when you encounter an unknown
3845 * argument", but there isn't one. So there's no real clean way to
3846 * easily parse two sets of arguments without having one invocation
3847 * of getopt know about the other.
3849 * Without this hack, the first invocation of getopt would work as
3850 * long as the generic arguments are first, but the second invocation
3851 * (in the subfunction) would fail in one of two ways. In the case
3852 * where you don't set optreset, it would fail because optind may be
3853 * pointing to the argument after the one it should be pointing at.
3854 * In the case where you do set optreset, and reset optind, it would
3855 * fail because getopt would run into the first set of options, which
3856 * it doesn't understand.
3858 * All of this would "sort of" work if you could somehow figure out
3859 * whether optind had been incremented one option too far. The
3860 * mechanics of that, however, are more daunting than just giving
3861 * both invocations all of the expect options for either invocation.
3863 * Needless to say, I wouldn't mind if someone invented a better
3864 * (non-GPL!) command line parsing interface than getopt. I
3865 * wouldn't mind if someone added more knobs to getopt to make it
3866 * work better. Who knows, I may talk myself into doing it someday,
3867 * if the standards weenies let me. As it is, it just leads to
3868 * hackery like this and causes people to avoid it in some cases.
3870 * KDM, September 8th, 1998
3873 sprintf(combinedopt
, "%s%s", mainopt
, subopt
);
3875 sprintf(combinedopt
, "%s", mainopt
);
3878 * For these options we do not parse optional device arguments and
3879 * we do not open a passthrough device.
3881 if ((cmdlist
== CAM_CMD_RESCAN
)
3882 || (cmdlist
== CAM_CMD_RESET
)
3883 || (cmdlist
== CAM_CMD_DEVTREE
)
3884 || (cmdlist
== CAM_CMD_USAGE
)
3885 || (cmdlist
== CAM_CMD_DEBUG
))
3888 #ifndef MINIMALISTIC
3890 && (argc
> 2 && argv
[2][0] != '-')) {
3895 * First catch people who try to do things like:
3896 * camcontrol tur /dev/da0
3897 * camcontrol doesn't take device nodes as arguments.
3899 if (argv
[2][0] == '/') {
3900 warnx("%s is not a valid device identifier", argv
[2]);
3901 errx(1, "please read the camcontrol(8) man page");
3902 } else if (isdigit(argv
[2][0])) {
3903 /* device specified as bus:target[:lun] */
3904 rv
= parse_btl(argv
[2], &bus
, &target
, &lun
, &arglist
);
3906 errx(1, "numeric device specification must "
3907 "be either bus:target, or "
3909 /* default to 0 if lun was not specified */
3910 if ((arglist
& CAM_ARG_LUN
) == 0) {
3912 arglist
|= CAM_ARG_LUN
;
3916 if (cam_get_device(argv
[2], name
, sizeof name
, &unit
)
3918 errx(1, "%s", cam_errbuf
);
3919 device
= strdup(name
);
3920 arglist
|= CAM_ARG_DEVICE
| CAM_ARG_UNIT
;
3924 #endif /* MINIMALISTIC */
3926 * Start getopt processing at argv[2/3], since we've already
3927 * accepted argv[1..2] as the command name, and as a possible
3933 * Now we run through the argument list looking for generic
3934 * options, and ignoring options that possibly belong to
3937 while ((c
= getopt(argc
, argv
, combinedopt
))!= -1){
3940 retry_count
= strtol(optarg
, NULL
, 0);
3941 if (retry_count
< 0)
3942 errx(1, "retry count %d is < 0",
3944 arglist
|= CAM_ARG_RETRIES
;
3947 arglist
|= CAM_ARG_ERR_RECOVER
;
3950 arglist
|= CAM_ARG_DEVICE
;
3952 while (isspace(*tstr
) && (*tstr
!= '\0'))
3954 device
= (char *)strdup(tstr
);
3957 timeout
= strtol(optarg
, NULL
, 0);
3959 errx(1, "invalid timeout %d", timeout
);
3960 /* Convert the timeout from seconds to ms */
3962 arglist
|= CAM_ARG_TIMEOUT
;
3965 arglist
|= CAM_ARG_UNIT
;
3966 unit
= strtol(optarg
, NULL
, 0);
3969 arglist
|= CAM_ARG_VERBOSE
;
3976 #ifndef MINIMALISTIC
3978 * For most commands we'll want to open the passthrough device
3979 * associated with the specified device. In the case of the rescan
3980 * commands, we don't use a passthrough device at all, just the
3981 * transport layer device.
3984 if (((arglist
& (CAM_ARG_BUS
|CAM_ARG_TARGET
)) == 0)
3985 && (((arglist
& CAM_ARG_DEVICE
) == 0)
3986 || ((arglist
& CAM_ARG_UNIT
) == 0))) {
3987 errx(1, "subcommand \"%s\" requires a valid device "
3988 "identifier", argv
[1]);
3991 if ((cam_dev
= ((arglist
& (CAM_ARG_BUS
| CAM_ARG_TARGET
))?
3992 cam_open_btl(bus
, target
, lun
, O_RDWR
, NULL
) :
3993 cam_open_spec_device(device
,unit
,O_RDWR
,NULL
)))
3995 errx(1,"%s", cam_errbuf
);
3997 #endif /* MINIMALISTIC */
4000 * Reset optind to 2, and reset getopt, so these routines can parse
4001 * the arguments again.
4007 #ifndef MINIMALISTIC
4008 case CAM_CMD_DEVLIST
:
4009 error
= getdevlist(cam_dev
);
4011 #endif /* MINIMALISTIC */
4012 case CAM_CMD_DEVTREE
:
4013 error
= getdevtree();
4015 #ifndef MINIMALISTIC
4017 error
= testunitready(cam_dev
, retry_count
, timeout
, 0);
4019 case CAM_CMD_INQUIRY
:
4020 error
= scsidoinquiry(cam_dev
, argc
, argv
, combinedopt
,
4021 retry_count
, timeout
);
4023 case CAM_CMD_STARTSTOP
:
4024 error
= scsistart(cam_dev
, arglist
& CAM_ARG_START_UNIT
,
4025 arglist
& CAM_ARG_EJECT
, retry_count
,
4028 #endif /* MINIMALISTIC */
4029 case CAM_CMD_RESCAN
:
4030 error
= dorescan_or_reset(argc
, argv
, 1);
4033 error
= dorescan_or_reset(argc
, argv
, 0);
4035 #ifndef MINIMALISTIC
4036 case CAM_CMD_READ_DEFECTS
:
4037 error
= readdefects(cam_dev
, argc
, argv
, combinedopt
,
4038 retry_count
, timeout
);
4040 case CAM_CMD_MODE_PAGE
:
4041 modepage(cam_dev
, argc
, argv
, combinedopt
,
4042 retry_count
, timeout
);
4044 case CAM_CMD_SCSI_CMD
:
4045 error
= scsicmd(cam_dev
, argc
, argv
, combinedopt
,
4046 retry_count
, timeout
);
4049 error
= camdebug(argc
, argv
, combinedopt
);
4052 error
= tagcontrol(cam_dev
, argc
, argv
, combinedopt
);
4055 error
= ratecontrol(cam_dev
, retry_count
, timeout
,
4056 argc
, argv
, combinedopt
);
4058 case CAM_CMD_FORMAT
:
4059 error
= scsiformat(cam_dev
, argc
, argv
,
4060 combinedopt
, retry_count
, timeout
);
4062 case CAM_CMD_REPORTLUNS
:
4063 error
= scsireportluns(cam_dev
, argc
, argv
,
4064 combinedopt
, retry_count
,
4067 case CAM_CMD_READCAP
:
4068 error
= scsireadcapacity(cam_dev
, argc
, argv
,
4069 combinedopt
, retry_count
,
4072 #endif /* MINIMALISTIC */
4082 if (cam_dev
!= NULL
)
4083 cam_close_device(cam_dev
);